Read Detailing Manual v7 text version

POLISHING, WAXING & EXTERIOR DRESSING

Introducing the 3M Automotive Detailing System

A Complete System that Includes Cleaners, Dressings, Polishes, Waxes and more.

Long the standard of quality and the preferred paint finishing system among automotive professionals, 3M offers a Detailing System for expanded customer satisfaction, increased worker safety, environmental compliance and product value.

This state-of-the-art system incorporates several safer products, technological advancements for excellent results, easy dispensing systems and other innovations to achieve the ultimate in detailing system performance. This complete line is the only system you need to deliver quality detailed vehicles for expanded customer satisfaction.

3MTM Detailing System ... "For the Life of Your Car"

3Detailing System

Table of Contents

SAFETY STATEMENT INSPECT AND PRE-CLEAN HEAVY CLEANING EXTERIOR CLEANING POLISHING, BUFFING, WAXING & EXTERIOR DRESSING INTERIOR CLEANING FINAL INSPECTION CHECKLIST BODY SHOP CLEAN-UP GUIDE PAINT FINISHING DO'S AND DON'TS PAINT REPAIR PROCEDURE DILUTION RATIOS DILUTER USAGE ­ Installation / Troubleshooting PRODUCT INFORMATION DETAILING FINAL EXAM ORDERING INFORMATION 3 4 6 8 10 12 14 15 17 19 21 23 27 43 45

SAFETY STATEMENT SAFETY STATEMENT

3M Detailing Products Safety Statement

Read and understand all safety information before using this product.

Wear appropriate personal protective equipment to include:

Boots · Chemical resistant gloves · Aprons · Eye protection · No loose fitting clothing or articles that may be caught in moving parts · Avoid belts with buckles that may damage painted surfaces · Avoid sharp objects that may damage leather or fabric upholstery

WARNING

Before handling or using detailing chemicals, be sure to read the Material Safety Data Sheet (MSDS) for health hazard data, precautionary information, and suggested first aid.

CAUTION

Eye irritation -- wear eye protection when dispensing solutions and when replacing concentrate bottle solutions. Skin irritation -- wear rubber gloves when dispensing solutions and when replacing concentrate bottle solutions.

WARNING

Fire hazard. Window Cleaner concentrate solution is flammable. Keep away from open flame; no smoking nearby. Consult local regulation for VOC compliance.

CAUTION

Eye hazard. Flying particles and dust. Wear safety glasses with side shields when drilling or hammering.

3

INSPECT AND PRE-CLEAN

3MTM Automotive Reconditioning Guide INSPECT & PRE-CLEAN

remove leaves and Check for loose or 1. an air blower to brakes, oil filler,from trunk jambsreplaceengine cowlings.Remove all trash frommissing caps on power steering, power etc.; tighten or if necessary. interior including trunk, ashtray, and seat folds. Inspect the interior carpet and fabric upholstery for any stains or heavily soiled areas that will require pre-spotting. Inspect the vehicle. Note any adhesive residue, tree sap, or bug spatters that will need to be specially treated. Use

interior carpet or fabric upholstery surfaces 2. Pre-spot any stained oratheavily(1soiled concentrate plus 15 parts water) and brush using 3MTM All Purpose Cleaner and Degreaser, diluted 1:15 part lightly. Pre-spotting and brushing greatly enhances the effectiveness of the cleaner and reduces the time needed to remove the stains later in the process.

4

INSPECT AND PRE-CLEAN

3MTM Automotive Reconditioning Guide INSPECT & PRE-CLEAN

3MTM Heavy Duty Wheel Cleaner to the the following 3. ApplyStep 1: Determine which concentration towheels. Useon experience.steps to achieve maximum performance: use based - Use a 1:2 dilution for lightly soiled wheels (1 part concentrate plus 2 parts water) - Use 100% concentrate for heavily soiled wheels (undiluted). Step 2: Spray 3MTM Heavy Duty Wheel Cleaner onto a DRY wheel. Pre-rinsing the wheel dilutes the product, reducing its effectiveness.

4. Apply 3MTM All Purpose Cleaner and Degreaser, diluted at 1:15 (1 part concentrate plus 15 parts water), to the

DO NOT use 3MTM Heavy Duty Wheel Cleaner on glass, engines, anodized wheels and/or wheels with no coating or with coating cracked or in poor condition. Glass that is stained by the 3MTM Heavy Duty Wheel Cleaner can not be repaired and will need to be replaced. Note: 3MTM Heavy Duty Wheel Cleaner does not contain hydrofluoric or other strong acids. engine and engine compartment (lightly), tires, wheels, wheel wells, rocker panels, door and trunk jams, etc. Let stand for 1 to 2 minutes. Rinse or wipe down engine and engine compartment surfaces with towel. Note: 3MTM Heavy Duty Wheel Cleaner works best on brake dust, while 3MTM All Purpose Cleaner and Degreaser works best on other soils. For best results, use both products on wheels.

5

HEAVY CLEANING

3MTM Automotive Reconditioning Guide HEAVY CLEANING

tires, wheels, and other heavily soiled areas A bristled brush 1. Scruband most wheels, however, for chrome wheels,asanecessary. or medium stiffnessoften produces works best on tires wash mitt terry cloth towel better results.

exterior areas where 3MTM 2. Thoroughly rinse all of the applied. Rinse or wipe3MTM Heavy Duty Wheel Cleaner and/or last. All Purpose Cleaner and Degreaser have been down engine and engine compartment

Do not spray or rinse water on sensitive electrical engine components. Note: It is recommended that you start the engine when rinsing or spraying the engine compartment with water.

6

HEAVY CLEANING

3MTM Automotive Reconditioning Guide HEAVY CLEANING

(CONTINUED) residue the Adhesive Remover with a towel 3. Remove anyNoadhesiveavailable fromsale invehicle's exterior surfaces using 3MTM3MTM General Purpose Adhesive or for California. Suggested replacement: scrub pad. longer Cleaner (PN 08984 or PN 08987).

7

EXTERIOR CLEANING

3MTM Automotive Reconditioning Guide EXTERIOR CLEANING

3MTM All Purpose 1. Applybug spatters. Cleaner and Degreaser, diluted at 1:15 (1 part concentrate plus 15 parts water) onto any

the vehicle using 3MTM Wash Soap at part concentrate plus 100 parts water) and clean, 2. Washsponge, towel, wash mitt Car3MTM Detail dilutedStart1:100the(1top and work downward, scrubbing the areasa with soft, or Cloth. at bug spatters last. Note: 3MTM Car Wash Soap cleans effectively at a 1 to 100 dilution ratio. Increasing the concentration will increase the suds but will also be more difficult to rinse off.

8

EXTERIOR CLEANING

3MTM Automotive Reconditioning Guide EXTERIOR CLEANING

(CONTINUED) step or necessary): Clay as Cleaner 3. Optional3MTM (if needed Soap as a lubricant.the vehicle mayneededbewith 3MTM Perfect-ItTM isIII dry usingClay using the diluted Car Wash This step also done after the vehicle 3MTM Perfect-ItTM Gloss Enhancer as a lubricant.

4. Rinse the entire vehicle thoroughly and dry using a chamois or a clean, soft, cotton terry cloth towel.

terry cloth 5. undiluted andbya washing. towel. Inspect vehicle after wash to identify any tree sap or similar deposits that were not removed

Optional step if needed or necessary: Remove any tree sap deposits on glass surfaces using 3MTM Glass Cleaner

9

POLISHING, BUFFING, WAXING & EXTERIOR DRESSING

3MTM Automotive Reconditioning Guide POLISHING, BUFFING, WAXING & EXTERIOR DRESSING

using the following 1. Polish as neededpolishing steps: guidelines: Recommended - Swirls and fine scratches: Step 1. Polish using 3MTM Detail Polish 108 with a 3MTM Perfect-ItTM Foam Polishing Pad, PN 05725. Step 2. Wax. - Oxidation and medium scratches: Step 1. Polish using 3MTM Detail Polish 208 with a 3MTM SuperbuffTM Polishing Pad, PN 05705. Step 2. Polish using 3MTM Detail Polish 108 with a 3MTM Perfect-ItTM Foam Polishing Pad, PN 05725. Step 3. Wax. - Heavy oxidation and coarse scratches: Step 1. Compound using 3MTM Detail Compound 308 with a 3MTM SuperbuffTM III 2 Plus 2 Buffing Pad, PN 05704. Step 2. Polish using 3MTM Detail Polish 108 with a 3MTM Perfect-ItTM Foam Polishing Pad, PN 05725. Step 3. Wax. Polishing materials: - 3MTM Detail Compound 308 = fastest cut / coarsest finish - 3MTM Detail Polish 208 = less cut / finer finish - 3MTM Detail Polish 108 = least cut / finest finish Polishing pads: - 3MTM SuperbuffTM III 2 Plus 2 Buffing Pad, PN 05704 = fastest cut / coarsest finish - 3MTM SuperbuffTM Polishing Pad, PN 05705 = less cut / finer finish - 3MTM Perfect-ItTM Foam Compounding Pad, PN 05723 = less cut / finer finish - 3MTM Perfect-ItTM Foam Polishing Pad, PN 05725 = least cut / finest finish

Compound / Polish Characteristics

Most

Least

05954 / 05955 05973 / 05974 38105 05928 / 05929 38116 38133 38111 39030 / 38112

Coarse

Aggressiveness

Fine

Buffing Pad Characteristics

Most

Least

05703 05719 05704 05705 05713 05723 05725

Coarse

Aggressiveness

Fine

Finish

Finish

10

POLISHING, BUFFING, WAXING & EXTERIOR DRESSING

3MTM Automotive Reconditioning Guide POLISHING, BUFFING, WAXING & EXTERIOR DRESSING

(CONTINUED)

Wax or 3MTM Performance best results: 2. Show1.Car Pastethin, uniform coating of waxFinish for Performance Step Apply a or 3MTM Finish. Allow Detail Wax or Paste Wax to dry to a haze. Step 2. Remove wax residue using a soft, cotton terry cloth towel. Step 3. Detail using a 3MTM Perfect-ItTM Detailing Cloth.

Wax the painted surfaces using 3MTM Detail Wax or 3MTM Perfect-ItTM

3MTM PERFORMANCE FINISH FOR BEST RESULTS DIRECTIONS FOR USE Do not apply in direct sunlight or onto a hot surface. Wash and dry vehicle using 3MTM Car Wash Soap (PN 39000). If paint is dull or oxidized use 3MTM One Step Cleaner Wax (PN 39006) after washing the vehicle, but prior to using 3MTM Performance Finish. HAND Step 1. Gently apply a thin, uniform film to the paint surface using a terry cloth wax applicator or a clean, soft, folded cotton terry cloth towel. Step 2. Remove residue and buff to a high gloss using a 3MTM Microfiber Detail Cloth (PN 39016) or a clean, soft, cotton terry cloth towel. Step 3. Complete method one panel at a time. MACHINE Step 1. Apply a thin, uniform film to the paint surface using a random orbital polisher equipped with a clean, soft, terry cloth bonnet or DA equipped with a soft foam pad. Step 2. Buff to a high gloss with a polisher equipped with a clean, dry, terry cloth bonnet or by hand using a 3MTM Microfiber Detail Cloth (PN 39016) or a clean, soft, cotton terry cloth towel. Step 3. Complete method one panel at a time.

Dressing Free 3. Dress the tires using 3MTM Tire coating toora 3MTM Siliconeusing Tire Dressing. Apply a thin, uniform clean, dry tire a sprayer or applicator pad. The level of gloss can be controlled by the thickness of of the coating. DO NOT USE 3MTM Tire Dressing or 3MTM Silicone Free Tire Dressing on motorcycles, bicycles, or other two-wheeled vehicles' tires or seats. Avoid spraying onto brake rotors, brake drums or brake pedals.

3MTM Silicone Free Tire Dressing

Note: Allow 3MTM Silicone Free Tire Dressing to completely dry before driving vehicle as sling (particularly from newer tires) may stain painted surfaces. 3MTM Tire Dressing

11

INTERIOR CLEANING INTERIOR CLEANING

3MTM Automotive Reconditioning Guide INTERIOR CLEANING

(1 concentrate plus parts water) a towel or brush. 1. at 1:30 Usepart air blower with the30towel for hardandreach places. Dry the surface using a clean, dry terry cloth towel. an to Note: For cleaning heavily soiled vinyl or leather upholstery, use 3MTM All Purpose Cleaner and Degreaser, diluted at 1:15 (1 part concentrate plus 15 parts water). Clean the interior vinyl, plastic, leather, and rubber surfaces using 3MTM All Purpose Cleaner and Degreaser, diluted

clean vehicle's 2. Thoroughlydilutedthe1:100). carpet and upholstery using an extraction machine with 3MTM All Purpose Cleaner and Degreaser at

12

INTERIOR CLEANING

3MTM Automotive Reconditioning Guide INTERIOR CLEANING

(CONTINUED) Apply enough 3. Dress thetovehicles interior vinyl, plastic, leather, and rubber components using 3MTM Interior Dressing.cloth towel. dressing achieve a uniform wet appearance. Wipe off excess dressing using a clean, soft, dry terry Note: - For a lower gloss, dilute 3MTM Interior Dressing 1:1 with water (1 part concentrate plus 1 part water). - For a higher gloss, use 3MTM Engine and Tire Dressing undiluted.

using Premium 4. Clean the vehicle's windows cotton3MTMcloth towel.Glass Cleaner diluted at 1:14 (1 part concentrate plus 14 parts water) and a clean, soft, dry terry CAUTION: DO NOT USE UNDILUTED 3MTM GLASS CLEANER ON INTERIOR VEHICLE SURFACES.THE CONCENTRATED PRODUCT WILL STAIN VINYL AND LEATHER, AND MAY STAIN OTHER SURFACES. Note: - In hot, humid weather conditions spray and clean one window at a time - Use 3MTM Glass Cleaner concentrate undiluted for removing tree sap from exterior windows.

the vehicle 5. Thoroughlyforinspectdetailing. exterior. Use a 3MTM Perfect-ItTM Detailing Cloth and/or 3MTM Perfect-ItTM Gloss Enhancer final

13

FINAL INSPECTION CHECKLIST

3M Customer Pre-Delivery Detailing Checklist

Pre-Delivery Cleaning and Final Inspection:

K Inspect the vehicle K Adhesive residue, tree sap, bug spatters K Leaves, debris in jambs and cowlings K Loose or missing caps, tighten or replace K Remove all trash from interior including trunk, ashtray, and seat folds K Note stains or heavily soiled carpet or upholstery K Pre-spot and brush stained or heavily soiled areas K Clean wheels and wheel wells K Clean engine K Removed tar and/or adhesive residue K Wash vehicle K Clay vehicle if needed K Removed tree sap if needed K Buff and wax vehicle K Compound removal from jambs, moldings, etc. K Dress tires K Interior cleaning: K Removed all items from interior K Vacuum all surfaces K Presoak carpet and upholstery stains K Scrub stained areas with brush K Finish cleaning carpet and upholstery K Clean all interior surfaces, vinyl, leather K Dress all interior surfaces K Clean interior and exterior glass K Replaced all items in vehicle K Final exterior inspection

Responsibility: ______________

______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________

14

BODY SHOP CLEAN-UP SYSTEM

3MTM Body Shop Clean-Up SYSTEM GUIDE

1. Inspect vehicle 2. Pre-Spot heavily soiled interior spots with APC

STEP 2 Cleaner (Do not use on anodized wheels 3. Apply HD Wheelcoating or with coating glass, engines,poor condition.) and/or wheels with no cracked or in - 3MTM Heavy Duty Wheel Cleaner (PN 38374/38375) STEP 3

APC Degreaser engine 4. Apply- 3MTM&All-PurposetoCleaner &compartment, wheels, tires, jams, etc... Degreaser (PN 38350/38351/38052) STEP 4

5. Brush tires/wheels as needed 6. Rinse APC & Degreaser

or adhesive residue with 7. Remove tapeGeneral Purpose AdhesiveGPAC or Adhesive Remover - 3MTM Cleaner (PN 08984/08986/08987) - 3MTM Adhesive Remover (PN 38080/38081/38082) STEP 7

APC & Degreaser 8. Pre-soak bugs and/or compound &residue with (PN 38350/38351/38052) - 3MTM All-Purpose Cleaner Degreaser STEP 8

15

BODY SHOP CLEAN-UP SYSTEM

Car Soap 9. Wash- total vehicle withSoap Wash38377/38378/38079) 3MTM Car Wash (PN

STEP 9

10. Clay paint overspray as required 11. Rinse and dry

sap with undiluted Glass Cleaner 12. Remove treeGlassfrom glass(PN 38399/38300/38101) as required - 3MTM Cleaner STEP 10

Final painted 13. Apply- 3MTMGlaze to fresh3000 Finalareas (PN 06067/06066) Perfect-ItTM Glaze

STEP 14

tires 14. Dress- 3MTMwith Silicone-Free Tire Dressing 38327/38328) Silicone-Free Tire Dressing (PN

STEP 15

interior with APC Degreaser 15. Clean- 3MTM All-Purpose&Cleaner & Degreaser (PN 38350/38351/38052) STEP 16

interior and 16. Clean- 3MTM Glass exterior windows with Glass Cleaner Cleaner (PN 38399/38300/38101)

with and inspect 17. Wipe-vehicleDetailDetail Cloth06016/06017/06018) 3MTM Cloth (PN

18. Attach mirror hang tag with shop business card

16

PAINT FINISHING DO'S AND DON'TS

Paint Finishing Do's & Don'ts

1. Sanding Step 4. Polishing Step

DRY

OR

WET

· Removes defects such as deep scratches, dust nibs or excessive orange peel · Dry sand with Dual Action Sander, foam interface pad recommended for contours OR wet sand by hand Caution: Sanding through clear coat will require repainting · Follow with Scratch Refinement Step and/or Compounding Step

· Removes swirls, fine scratches and very mild stains · For Dark Colors use finer polish and finer foam pads · For Lighter Colors use more aggressive polish and foam pads · Note: Swirls and imperfections remaining after this step will reoccur after waxing step products wash or wear off · Follow with Waxing Step

2. Scratch Refinement Step

5. Waxing Step

· Damp sand with 3MTM TrizactTM disc on Dual Action Sander · Use foam interface pad for contours · Produces Semi-polished finish · Follow with Compounding Step

3. Compounding Step

· Waxing fills swirls, very minor scratches and imperfections by leaving a thin layer of wax protection · Wax does little to further refine paint after the polishing step. After wax is washed or worn away, the imperfections remaining after polishing will reappear · Apply a thin even coat · Apply by hand on a damp pad · Apply with a Dual Action Sander using: 05729 3MTM Perfect-itTM Foam Polishing D/A Pad - 6 in. 05739 3MTM Perfect-itTM Hookit II Foam D/A Glazing Pad 05732 3MTM Perfect-itTM HookitTM II DA Foam Application Pad - 6 in.

· Removes imperfections, such as car wash scratches, medium to coarse scratches, medium oxidation and stains · Use wool pad for faster and more aggressive cutting · Use foam pad for slower and finer cutting · Follow with Polishing Step

17

BUFFING DO'S AND DON'TS

Hiding vs. Removing Paint Defects

While polishing and waxing a vehicle, you may have noticed that some fine scratches became less visible or even disappeared, only to reappear after the vehicle has been washed a few times. By using the correct system of products and procedures, many small paint defects can be removed and will not reappear when the polish and wax are washed and worn away.

3MTM Perfect-ItTM Foam Pads Instructions for Use: Recommended speed -- 1500 to 2000 R.P.M. Do not exceed 3000 R.P.M. Use only with 3MTM HookitTM SBSTM Backup Pad, PN 05717 or a 3MTM Perfect-ItTM Backup Pad, PN 05718. To Install: 1. Center the compound pad on the backup pad. 2. Press firmly and twist to insure good contact with backup pad. IMPORTANT: Use caution around trim or moldings to avoid snagging or tearing the pad. Keep the pad flat, or nearly flat, on surface being compounded. To minimize the possibility of burning, reduce pressure over sharp convex/concave areas such as detail lines, fenders, etc. and keep surface wet with compound. 3M Foam Pad Care and Cleaning Instructions: If pad becomes clogged, remove and install a clean pad. Clean clogged pad as follows: 1. Rinse in warm (up to 115°F) water. 2. Set wet pad face up on a flat surface and allow to dry. IMPORTANT: Rinse under water faucet. Do not use soap or cleaning solvents. Do not machine wash or dry. Do not clean pads with a buffing spur or screwdriver.

To remove a defect from the paint surface, you must remove the very thin layer of paint that contains the defect by spending enough time with a compound or polish. By removing this thin layer of paint, you actually remove the defect. See Illustration 1.

Some scratches, acid rain pits, or other more severe defects may not be able to be removed completely. If a defect goes too deep into the clear coat, sanding to the bottom of the defect may result in inadequate clear coat thickness, or may even require a repaint. See Illustration 2. Generally speaking, if you can feel a scratch with your fingernail, you should not attempt to remove it completely. However, even without sanding, many deep scratches or other more severe defects that are compounded, polished and waxed will be less noticeable.

3MTM SuperbuffTM III Buffing Pad (double-sided wool pad) CAUTION: 3MTM SuperbuffTM III Buffing Pad can spin off air-driven polishers due to tool's rapid stop. To avoid spin off, firmly tighten buff onto adapter. Use 7/8 in. wrench to hold adapter while tightening buff. Buffing Pad Care and Cleaning Instructions: Periodically rake pad with buffing spur or air nozzle to remove excess rubbing compound or glaze. If pad becomes clogged, remove, turn over, reinstall and continue buffing, allowing used side to dry. Washing pad causes shrinkage of wool fibers. If washing is desired, use only cool (60­80°F) water. Do not use hot water, strong detergents or solvents. Use washing machines with gentle agitation only. Machine drying is not recommended.

3MTM Perfect-ItTM Foam Pad CORRECT

3MTM Perfect-ItTM Foam Pad INCORRECT

3MTM SuperbuffTM Buffing Pad CORRECT

3MTM SuperbuffTM Buffing Pad INCORRECT

18

PAINT REPAIR PROCEDURE

Paint Condition

Diagnosis

Sanding & Scratch Refinement

New or Like New

Virtually no imperfections

Swirls and Very Fine Scratches

Scratches / Swirls / Imperfections Visible only in sunlight

Heavy Swirls Fine Scratches Mild Stains Light Oxidation

Imperfections that can be seen in shade or fluorescent lighting, but appear as swirls in sunlight. This procedure is usually done on light to medium colored cars only.

Medium Scratches Car Wash Scratches Heavy Stains Medium Oxidation

Imperfections easily seen in shade or fluorescent lighting. Scratches can usually be seen separate from swirls in sunlight.

Coarse Scratches Heavy Oxidation

Imperfections easily seen in all lighting. Can usually be seen from some distance.

3MTM TrizactTM HookitTM II Foam Discs

Deep Scratches Excessive Overspray

Scratches plainly seen­ may have a white look. May be felt with a fingernail, but only very slightly. Scratches felt with a fingernail. BE CAREFUL! Abrasive removal of too much clear coat or sanding into base color coat may require repainting.

TIP: When in doubt, use finer system first and then use more aggressive system as required

02075

1

Very Deep Scratches

3MTM HookitTM II Finishing Film Discs -or3MTM ImperialTM WetordryTM Paper Sheets 02021

2

00850

1

TIP: Buffing pads in compounding step are listed most aggressive to finer finishing

19

PAINT REPAIR PROCEDURE

Repair Procedure Compounding Polishing Waxing

3MTM Detail Wax -or3MTM Perfect-ItTM Show Car Paste Wax -or3MTM Performance Finish -and3MTM Perfect-ItTM III Detailing Cloths 05725 3MTM Detail Polish #108 -and05751 3MTM Perfect-ItTM Foam Polishing Pad -or3MTM Perfect-ItTM 3000 UltrafinaTM SE -and3MTM Perfect-ItTM UltrafinaTM Foam Polishing Pad 5 3MTM Detail Polish #208 -and3MTM Perfect-ItTM Foam Compounding Pad- 8 in. 38133 06068 3MTM Detail Wax -or3MTM Perfect-ItTM Show Car Paste Wax -or3MTM Performance Finish -and3MTM Perfect-ItTM III Detailing Cloths 3MTM Detail Wax -or3MTM Perfect-ItTM Show Car Paste Wax -or3MTM Performance Finish -and3MTM Perfect-ItTM III Detailing Cloths 06016 06017 39526 38111 38112

4

4

06016 06017 39526

38111 38112

4

4

05723 38116

06016 06017 39526

38111 38112

5

4

4

3MTM Detail Compound #308 -and05719 3MTM Perfect-ItTM III 05703 Compounding Pad 05704 -or3MTM SuperbuffTM III 05723 Buffing Pad -or3MTM SuperbuffTM III 2 Plus 2 Buffing Pad -or3MTM Perfect-ItTM Foam Compounding Pad- 8 in.

3

38105

5

3MTM Detail Polish #108 -and3MTM Perfect-ItTM Foam Polishing Pad -or3MTM Perfect-ItTM 3000 UltrafinaTM SE -and3MTM Perfect-ItTM UltrafinaTM Foam Polishing Pad

05725 38133 05751 06068

3MTM Detail Wax 06016 -or06017 3MTM Perfect-ItTM Show 39526 Car Paste Wax -or3MTM Performance Finish -and3MTM Perfect-ItTM III Detailing Cloths

38111 38112

5

5

4

4

3MTM Perfect-ItTM II Rubbing Compound -and3MTM Perfect-ItTM III 05719 05973 05703 Compounding Pad 05704 -or3MTM SuperbuffTM III Buffing Pad -or3MTM SuperbuffTM III 2 Plus 2 Buffing Pad 3

3MTM Detail Compound #308 -and3MTM Perfect-ItTM III Compounding Pad -or3 3MTM SuperbuffTM III Buffing Pad -or3MTM SuperbuffTM III 2 Plus 2 Buffing Pad -or3MTM Perfect-ItTM Foam Compounding Pad- 8 in.

5

05725 38133 3MTM Detail Polish #108 -and05751 06068 3MTM Perfect-ItTM Foam Polishing Pad -or3MTM Perfect-ItTM 3000 UltrafinaTM SE -and3MTM Perfect-ItTM UltrafinaTM Foam Polishing Pad 5 05725 38133 3MTM Detail Polish #108 -and05751 06068 3MTM Perfect-ItTM Foam Polishing Pad -or3MTM Perfect-ItTM 3000 UltrafinaTM SE -and3MTM Perfect-ItTM UltrafinaTM 5 Foam Polishing Pad 05725 38133 3MTM Detail Polish #108 05751 06068 -and3MTM Perfect-ItTM Foam Polishing Pad -or3MTM Perfect-ItTM 3000 UltrafinaTM SE -and3MTM Perfect-ItTM UltrafinaTM Foam Polishing Pad 5

3MTM Detail Wax -or3MTM Perfect-ItTM Show Car Paste Wax -or3MTM Performance Finish -and3MTM Perfect-ItTM III Detailing Cloths

06016 06017 39526

38111 38112

4

4

05719 05704 05703 05723 38105

5

3MTM Detail Wax -or3MTM Perfect-ItTM Show Car Paste Wax -or3MTM Performance Finish -and3MTM Perfect-ItTM III Detailing Cloths

06016 38111 06017 38112 39526

4

4

05719 38105 3MTM Detail Compound #308 05703 -and3MTM Perfect-ItTM III Compounding Pad 05704 05723 -or3MTM SuperbuffTM III Buffing Pad 3 -or3MTM SuperbuffTM III 2 Plus 2 Buffing Pad -or3MTM Perfect-ItTM Foam Compounding Pad- 8 in. 5

3MTM Detail Wax 06016 38111 -or06017 38112 3MTM Perfect-ItTM Show 39526 Car Paste Wax -or3MTM Performance Finish -and3MTM Perfect-ItTM III Detailing Cloths

4

4

1­ Use Disc Pad PN 05251 (on DA Sander) and Optional Interface Pad PN 05274 or by hand with Pad PN 05291

2­ Use 3MTM No.20 Sponge Pad PN 05526 3­ Use with Superbuff Adapter PN 05710 and PN 05718

4­ For Dual Action Sander Application use Pad PN 05251 and Pad PN 05739 or PN 05732 5­ Use with PN 05718 or PN 05717

20

DILUTION RATIOS

Product Dilution Ratios Explained

Mix water-based chemicals with water to make ready-to-use products. Why - Safer for workers - Save money buying concentrates - Ratios pre-set to match the job - Better for the environment Dilution examples - 1:3 or one-to-three = 1 part concentrate + 3 parts water = 4 gallons of useable product - 1:15 or one-to-fifteen = 1 part concentrate + 15 parts water = 16 gallons of useable product Cost per gallon example - 1:4 = 1 part concentrate ($5.00) + 4 parts water ($0.00) = $5.00 for 5 gallons or $1.00 per useable gallon 3M dilution suggestions See below

SPRAY BOTTLE

AUTOMATIC DILUTER

BULK CONCENTRATE

Label Mix

Diluter Pre-mix

Shop Mix

21

DILUTER USAGE

3MTM Detailing Product Diluter INSTALLATION & USE INSTRUCTIONS

Read and understand all safety information before using this product. Intended Use The 3M Detailing Product Diluter is intended to be used to dilute and dispense selected water based 3M Detailing Products. The diluter is designed to operate on typical city water supply pressures. Miscellaneous Diluter and Accessory Parts · Available from Shopware Inc. Phone # 1-800-877-9344 Fax # 952-392-2018 for order form · Other accessories parts/service available · Shopware part numbers below · Pay via Visa, MasterCard or American Express Part Number PD100 PD101 PD102 PD103 Description Diluter tip kit (5 kits with 14 sizes) Viton® foot valve (blue color 5/kit) In-line check valve (blue color 3/kit) Pickup tube kit (1 tube, 3 weights, 3 Viton® foot valve) PD104 Diluter (PN 37711) selector switch PD105 Glass cleaner foot valve (gray color 5/kit) PD106 Rieke Spout Spigot (for 5 gallon round and one gallon plastic 2/kit) Male NPT Spigot (for 5 gallon cubes 2/kit) PD107 PD108 Utility funnel (16oz. 3/kit) PD109 Glass Cleaner in-line valve (gray color 3/kit) PD110 5-Shelf Stack Rack (for 5-gallon cubes; black color) Price includes shipping and handling. PD111 Conversion kit (PN 37712) to Glass Cleaner Viton® is a registered trademark of Dupont Dow Elastomers L.L.C. Corporation.

Safety Information

WARNING

Before handling or using detailing chemicals, be sure to read the Material Safety Data Sheet (MSDS) for health hazard data, precautionary information, and suggested first aid.

WARNING

Fire hazard. Window Cleaner concentrate solution is flammable. Keep away from open flame; no smoking nearby.

CAUTION

Eye irritation -- wear eye protection when dispensing solutions and when replacing concentrate bottle solutions. Skin irritation -- wear rubber gloves when dispensing solutions and when replacing concentrate bottle solutions.

CAUTION

Eye hazard. Flying particles and dust. Wear safety glasses with side shields when drilling or hammering.

22

DILUTER USAGE

3MTM Detailing Product Diluter INSTALLATION & USE INSTRUCTIONS

(CONTINUED) Installing the Diluter 1. Open the carton and check contents. - The carton contains the diluter control console with attached concentrate supply tubes and dispenser tubes. - Also, there is a small bag that contains one spare bottle cap, mounting screws, and wall anchors. 2. Remove the front cover from the control console. - Press in on the tabs on both sides of the control console and simultaneously lift the front panel off. 3. Mark the location of 3 mounting screws on the wall. - Position the back plate of the control console against the wall at the desired location. (You may use a level to make sure the control console is straight, but this is not critical to operation.) - Mark the location of the mounting screws with a pen or pencil. There are two keyholes at the top of the plate and a slot hole near the bottom, left side.

CAUTION

Eye hazard. Flying particles and dust. Wear safety glasses with side shields when drilling or hammering. 4. Drill holes for screws. - Use a 5/16" drill bit to make holes for the 3 wall anchors. You may need to use a masonry drill bit for some types of wall. 5. Insert wall anchors. - Hammer the anchors flush to the wall. 6. Insert top two screws - Screw in the top two screws, but leave the heads out about 1/4" from the wall. - Do not install the third screw yet. 7. Secure the backplate to the wall - Do not over tighten the screws. - Place the console backplate on the wall. The keyholes at the top should fit over the two screw heads in the wall and slip down into the keyhole notches. - Install the bottom screw and then tighten all three screws. 8. Attach the water supply. - Thread the end of a standard garden hose to the connector on the right side of the control console (as you face the unit). - Note: The cap on the connector on the left side (as you face the unit) should normally remain in place.

IMPORTANT

Inspect to be sure the tubes are attached securely. The tube for supplying glass cleaner concentrate to the diluter is a special tube and must be used for the glass cleaner concentrate. Do not switch tubes. 9. Snap the front cover into place. - Press in on the two side tabs while pushing the cover on until it snaps into place. 10. Arrange concentrate containers below diluter so hoses are neatly arranged. - Each supply tube has a label on it to identify the concentrate product it supplies. - Insert each concentrate supply tube into its correct concentrate container and fasten the lid.

23

DILUTER USAGE

IMPORTANT

Make sure the supply tubes are inserted into their correct concentrate product containers. Using the Diluter Dispense Heavy Duty Wheel Cleaner: - Place a correctly labeled detailing spray bottle onto the corresponding product tube coming out the bottom of the diluter console. - Press and hold correct button until bottle is filled. Dispense Glass Cleaner or All Purpose Cleaner & Degreaser: - Place a correctly labeled detailing spray bottle onto the corresponding product tube coming out the bottom of the diluter console. - Press and hold correct button until bottle is filled. Dispense Car Wash Soap: - The long tube on the right bottom of the console is for dispensing soap into a bucket on the floor. Place the end of the tube in a bucket. - Press and hold the right button, labeled Car Wash Soap, until you've dispensed the amount you want.

The chart above shows the dilution ratios of water to various 3M detailing products. The eductor, labeled at the top, can be brown, grey, or yellow. The eductor is the part in the assembly that the hoses attach to. Find your eductor color and look below it to find the product you are using. In the column below your product, you will see various dilution ratios. Find your ratio and follow it left to determine which dilution tip color you will use. Example: Brown eductor with a black dilution tip has a dilution ratio of 1:2 of 3MTM Heavy Duty Wheel Cleaner to water. Depending on your hose fitting size you may have a snap tip or a threaded tip. If you are using a threaded dilution tip, it is important that you screw hand tight plus a 1/4 turn. If you are using a snap dilution tip, fully insert it into the barbed fitting (be sure not to squeeze the tip). **Requires 3MTM Diluter Conversion Kit for Glass Cleaner (PD111) (Shopware 1-800-877-9344)

24

DILUTER USAGE

3MTM Detailing Product Diluter TROUBLESHOOTING GUIDE

PROBLEM:

Excessive foam in 3MTM Heavy Duty Wheel Cleaner (when filling, bottle is more than 1/2 full of foam) 3MTM Car Wash Soap not sudsy enough No siphon on select product(s) Water leaks where garden hose attaches to diluter Water leaks where gray water hose fitting meets white valve housing

SOLUTION:

Tighten the fitting where the 3MTM Heavy Duty Wheel Cleaner suction hose meets the diluter Replace yellow orifice tip with brown, orange or green orifice tip Ensure all fittings are very tight and secure. Replace foot valve on the end of the hose. Ensure adequate water pressure Ensure rubber washer is inside fitting. Tighten the fitting Unscrew gray fitting, reapply thread sealer/tape, screw fitting back in Replace foot valve on the end of the hose. Note: Use gray foot valve for 3MTM Glass Cleaner and a blue foot valve for all other products. Mineral deposits inside eductor misdirecting water flow; remove eductor and soak/clean with lime-away type product and reinstall.** Remove supply hose, clean out crystals, and reinstall or replace selector switch or install separate 3MTM Single Product Diluter PN 37712 with Glass Cleaner Conversion Kit PD111 (Available from Shopware 1-800-877-9344) Replace selector switch or disassemble and clean selector switch with water. Note: Pay attention to how the switch comes apart for exact re-assembly

After use, suction hose drains down or loses prime

While in use, water "spits out" from gray or yellow eductor

After usage, solid crystals develop in 3MTM Glass Cleaner supply hose

After usage, residue builds up around and inside selector switch causing difficult operation or reduced suction*

25

DILUTER USAGE

PROBLEM:

SOLUTION:

a. Open water supply. b. Install valve parts kit. c. Install regulator if water pressure exceeds 60 PSI (flowing). d. Clean** or replace. a. Clean or replace. b. Clean (descale)** or replace. c. Minimum 20 PSI (with water running) required to operate unit properly. d. Push tube firmly onto eductor discharge hose barb; be sure inner discharge tube is installed and has flooding ring. e. Replace with full container. f. Tighten, but do not overtighten. g. Disconnect inlet water line and clean strainer. a. Press correct tip firmly into barb on eductor. b. Place concentrate below the eductor. a. Clean** or replace with valve parts kit. b. Make sure magnet moves freely. c. Remove button and clean cabinet/button to remove any dirt lodged in slide recess a. Put clamp on tube or replace tube if brittle. b. Install inner discharge tube. a. Be sure discharge tube is not immersed, kinked or elevated. Be sure there is no liquid in the discharge tube when beginning to operate dispenser. b. Install pressure regulator if flowing water pressure exceeds 60 PSI (flowing).

No discharge

No concentrate draw

Excess concentrate draw

Failure of unit to turn off

Excess foaming in discharge

Water discharge from air vents on eductor

* Applies only to old model with selection switch (37711) ** In hard water areas, scale may form inside the discharge end of the eductor, as well as in other areas of the unit that are exposed to water. This scale may be removed by soaking the eductor in a descaling solution (deliming solution). To remove an eductor located in the cabinet, firmly grasp water valve and unthread eductor. Replace in same manner. Alternatively, a scaled eductor can be cleaned (or kept from scaling) by drawing the descaling solution through the unit. Operate the unit with the suction tube in the descaling solution. Operate the unit until solution is drawn consistently, then flush the unit by drawing clear water through it for a minute. Replace concentrate container and put suction tube into concentrate.

26

PRODUCT INFORMATION

PAINT SHOP SAFE!

3MTM Heavy Duty Wheel Cleaner

A water based cleaner concentrate for removing brake dust from vehicle wheels. Does not contain hydrofluoric or other strong acids. - PN 38374 (38074)* - PN 38375 (38075)* - PN 38076 1 gallon bottle 5 gallon pail 55 gallon drum

3MTM Heavy Duty Wheel Cleaner is a cleaner concentrate designed to remove tough brake dust deposits from wheels. Directions for Use: 1. Add 1 part cleaner concentrate to 2 parts water. 2. Apply 3MTM Heavy Duty Wheel Cleaner to vehicle wheels and let stand for about 2 minutes. Note: 3MTM Heavy Duty Wheel Cleaner works best when applied to a dry wheel. 3. Apply 3MTM All Purpose Cleaner and Degreaser (1:15 dilution) to the tires and wheels. Let stand for approximately one minute.* 4. Rinse thoroughly, using a high-pressure washer. 5. For particularly stubborn brake dust deposits, use 3MTM Heavy Duty Wheel Cleaner undiluted. *Note: 3MTM Heavy Duty Wheel Cleaner works best for removing brake dust, while 3MTM All Purpose Cleaner and Degreaser works best for cleaning tires and removing other difficult soils from wheels. DO NOT use 3MTM Heavy Duty Wheel Cleaner on glass, engines, anodized wheels and/or wheels with no coating or with coating cracked or in poor condition. Glass that is stained by the 3MTM Heavy Duty Wheel Cleaner can not be repaired and will need to be replaced. Note: 3MTM Heavy Duty Wheel Cleaner does not contain hydrofluoric or other strong acids. Tips: - For heavy brake dust deposits agitation with a brush greatly enhances cleaning effectiveness. - Light agitation on some chrome wheels greatly enhances the final appearance. - For removing water spots, apply 3MTM Heavy Duty Wheel Cleaner diluted at 1 part cleaner concentrate to 2 parts water to the vehicles painted surfaces, let stand two minutes but do not allow to dry, scrub using a terry cloth towel and rinse. Product Safety and Health Information Source: Material Safety Data Sheet (MSDS 08-3012-5) or 3M Automotive Aftermarket Division 3M Center, Bldg. 223-6N-01 St. Paul, MN 55144-1000 Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501 * Part number to be discontinued

27

PRODUCT INFORMATION

PAINT SHOP SAFE!

3MTM All Purpose Cleaner and Degreaser

A water based cleaner/degreaser concentrate for exterior and interior vehicle cleaning. - PN 38350 (38050)* - PN 38351 (38051)* - PN 38052 1 gallon bottle 5 gallon pail 55 gallon drum

3MTM All Purpose Cleaner and Degreaser is a heavy duty cleaner concentrate designed for both interior and exterior vehicle cleaning applications. 3MTM All Purpose Cleaner and Degreaser removes oil, grease, and other tough soils from vehicle engines, tires, wheels, and other heavily soiled exterior vehicle surfaces, and is very effective for removing insect residue from the fronts of vehicles. 3MTM All Purpose Cleaner and Degreaser also cleans and removes soils and most stains from carpet, fabric upholstery, vinyl, leather, and other interior vehicle surfaces. Directions for Use: DILUTION ­ 1:15 (Add 1 cup concentrate to a gallon container and fill with water.) Use for degreasing, tire and wheel cleaning, insect residue removal, carpet and upholstery stain removal, and other heavy duty cleaning applications. DILUTION ­ 1:30 (Add 1/2 cup concentrate to a gallon container and fill with water.) Use for cleaning vinyl, leather, plastic and other lightly soiled vehicle surfaces. Degreasing/Insect Residue Removal: (1:15 dilution) 1. Spray diluted cleaner onto heavily soiled areas ­ engines, tires, wheels, insect residue, etc. Let stand about 2 minutes. 2. Scrub/brush heavily soiled areas as needed. 3. Rinse thoroughly using a high pressure washer. Carpet/Fabric Upholstery Cleaning (1:15 dilution) 1. Spray diluted cleaner directly onto the surface. 2. Work the surface using the appropriate sponge, cloth, or brush. 3. Remove soil using an extraction unit. Vinyl/Leather ­ Light Duty Cleaning (1:30 dilution) 1. Spray the diluted cleaner directly onto the surface, or spray onto a terry cloth towel and apply. 2. Work the surface using the appropriate sponge, cloth, or brush. 3. Remove soil using a clean, dry terry cloth towel. Tips: - For maximum effectiveness do not allow degreaser to dry before rinsing. - For heavily soiled wheels; first apply 3MTM Heavy Duty Wheel Cleaner, soak two minutes, then apply 3MTM All Purpose Cleaner and Degreaser (1:15 dilution), soak one minute, scrub as needed and rinse. Product Safety and Health Information Source: Material Safety Data Sheet (MSDS 16-3418-7) or 3M Automotive Aftermarket Division 3M Center, Bldg. 223-6N-01 St. Paul, MN 55144-1000 Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501 * Part number to be discontinued

28

PRODUCT INFORMATION

PAINT SHOP SAFE!

3MTM Glass Cleaner

A solvent based water dilutable cleaner concentrate. - PN 38399 (38099)* - PN 38300 (38100)* - PN 38101 1 gallon can 5 gallon pail 55 gallon drum (special order)

3MTM Glass Cleaner is a concentrated cleaner that quickly and effectively removes smoke films, fingerprints and other soils from windows and plastic surfaces, and may also be used to assist in the removal of window stickers and adhesive residue. 3MTM Glass Cleaner does not contain ammonia and will not leave a filmy residue. Directions for Use: CAUTION: DO NOT USE UNDILUTED 3MTM GLASS CLEANER ON INTERIOR VEHICLE SURFACES. THE CONCENTRATED PRODUCT WILL STAIN VINYL AND LEATHER, AND MAY STAIN OTHER SURFACES. CAUTION: DO NOT USE 3MTM GLASS CLEANER ON FRESHLY PAINTED SURFACES. 1. Add 1 part concentrate to 14 parts water (add 1 cup to 1 gallon of water). 2. Spray onto the glass or plastic surface and rub thoroughly using a clean, soft, dry cotton terry cloth towel. 3. Remove the final material with a clean, soft, dry terry cloth towel. Tips: - To ensure optimum performance, always use fluorinated 3MTM Detailing Spray Bottles with 3MTM Glass Cleaner. - In hot, humid weather conditions spray one window at a time and wipe immediately. - Use 3MTM Glass Cleaner concentrate undiluted for removing tree sap from exterior windows. Product Safety and Health Information Source: Material Safety Data Sheet (MSDS 08-2999-4) or 3M Automotive Aftermarket Division 3M Center, Bldg. 223-6N-01 St. Paul, MN 55144-1000 Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501 * Part number to be discontinued

29

PRODUCT INFORMATION

PAINT SHOP SAFE!

3MTM Premium Glass Cleaner

A solvent based water dilutable cleaner concentrate. Excellent for high humidity conditions. - PN 38221 - PN 38222 1 gallon can 5 gallon pail

Directions for Use: CAUTION: DO NOT USE UNDILUTED 3MTM GLASS CLEANER ON INTERIOR VEHICLE SURFACES. THE CONCENTRATED PRODUCT WILL STAIN VINYL AND LEATHER, AND MAY STAIN OTHER SURFACES. CAUTION: DO NOT USE 3MTM GLASS CLEANER ON FRESHLY PAINTED SURFACES. 1. Add 1 part concentrate to 14 parts water (add 1 cup to 1 gallon of water). 2. Spray onto the glass or plastic surface and rub thoroughly using a clean, soft, dry cotton terry cloth towel. 3. Remove the final material with a clean, soft, dry terry cloth towel. Tips: - To ensure optimum performance, always use fluorinated 3MTM Detailing Spray Bottles with 3MTM Glass Cleaner. - In hot, humid weather conditions spray one window at a time and wipe immediately. - Use 3MTM Glass Cleaner concentrate undiluted for removing tree sap from exterior windows. Product Safety and Health Information Source: Material Safety Data Sheet (MSDS 08-2999-4) or 3M Automotive Aftermarket Division 3M Center, Bldg. 223-6N-01 St. Paul, MN 55144-1000 Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501

30

PRODUCT INFORMATION

PAINT SHOP SAFE!

3MTM Car Wash Soap

A highly concentrated water based soap. - PN 38377 (38077)* - PN 38378 (38078)* - PN 38079 1 gallon bottle 5 gallon pail 55 gallon drum

3MTM Car Wash Soap is a highly concentrated liquid soap which develops heavy-bodied, long-lasting suds and quickly removes dirt and road film from exterior automotive surfaces. Directions for Use: 1. Add 1 part soap concentrate to 100 parts water in a clean bucket (about 2/3 cup in five gallons water). 2. Rinse the vehicle thoroughly to remove any grit that could scratch the paint surface. 3. Wash the vehicle using a clean, soft, sponge, towel or wash mitt. 4. Rinse thoroughly and dry using a clean, soft, cotton terry cloth towel or chamois. Product Safety and Health Information Source: Material Safety Data Sheet (MSDS 08-3014-1) or 3M Automotive Aftermarket Division 3M Center, Bldg. 223-6N-01 St. Paul, MN 55144-1000 Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501 * Part number to be discontinued

31

PRODUCT INFORMATION

PAINT SHOP SAFE!

3MTM Adhesive Remover*

A solvent based product that quickly removes adhesive residue. - PN 38080 - PN 38081 - PN 38082 1 gallon can 5 gallon pail 55 gallon drum

3MTM Adhesive Remover is a ready-to-use blend of petroleum solvents designed to remove adhesive deposits from exterior vehicle surfaces. To minimize the possibility of staining, do not apply in direct sunlight or onto a hot surface. Directions for Use: 1. Soak cloth with 3MTM Adhesive Remover and apply onto the surface. 2. Rub thoroughly with a soft cloth and remove the excess material with a clean, dry, soft cloth. Repeat as necessary. 3. For stubborn deposits, apply material, allow to soak for one minute and scrub. Tips: - For difficult oil-based stains on fabric apply 3MTM Adhesive Remover, scrub, and clean using 3MTM All Purpose Cleaner and Degreaser or 3MTM Multi-Purpose Cleaner. - Use 3MTM Premium Glass Cleaner concentrate undiluted for removing tree sap from exterior windows. Product Safety and Health Information Source: Material Safety Data Sheet (MSDS 08-4315-1) or 3M Automotive Aftermarket Division 3M Center, Bldg. 223-6N-01 St. Paul, MN 55144-1000 Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501 *Not for sale in California. Suggested replacement: 3MTM General Purpose Adhesive Cleaner (PN 08984 or 08986 or 08987)

32

PRODUCT INFORMATION

3MTM Interior Dressing

A ready-to-use water based silicone dressing. - PN 38086 - PN 38087 1 gallon bottle 5 gallon pail

3MTM Interior Dressing is a ready-to-use water-based silicone emulsion designed to restore a natural gloss appearance to all vinyl, leather, rubber and plastic interior vehicle surfaces. Directions for Use: 1. Spray onto a clean, soft, cotton terry cloth towel and wipe onto the surface, or spray directly onto the surface and wipe. Use enough material to achieve a uniform appearance. 2. Wipe off excess material using a clean, soft, dry terry cloth towel to achieve a natural look and feel. Tips: - For a lower gloss dilute 3MTM Interior Dressing 1:1 with water. - For a higher gloss use 3MTM Engine and Tire Dressing undiluted. Product Safety and Health Information Source: Material Safety Data Sheet (MSDS 08-3134-7) or 3M Automotive Aftermarket Division 3M Center, Bldg. 223-6N-01 St. Paul, MN 55144-1000 Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501

33

PRODUCT INFORMA-

3MTM Engine and Tire Dressing

A water based silicone engine and tire dressing concentrate. - PN 38124 - PN 38125 - PN 38126 1 gallon bottle 5 gallon pail 55 gallon drum

3MTM Engine and Tire Dressing is a water-based silicone emulsion concentrate, designed to restore a deep black appearance on tires, hoses and rubber moldings, and a clean new look on vinyl, plastic, and other low gloss or flat painted surfaces. Directions for Use: 1. For dressing engines, add 1 part concentrate to 1 part water; or for dressing tires, apply concentrate. 2. Apply a uniform coating directly onto the surface and allow to dry naturally. Tips: - For higher gloss, use 3MTM Engine Dressing undiluted. - Great tire dressing where low VOC's are required. - 3MTM Engine and Tire Dressing may be used undiluted as a tire dressing or an interior dressing: 1. Apply a uniform coating to the surface. 2. Remove excess using a terry cloth towel. Product Safety and Health Information Source: Material Safety Data Sheet (MSDS 08-6460-3) or 3M Automotive Aftermarket Division 3M Center, Bldg. 223-6N-01 St. Paul, MN 55144-1000 Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501

34

PRODUCT INFORMATION

3MTM Tire Dressing

A solvent based ready-to-use silicone tire dressing. - PN 38127 - PN 38128 - PN 38129 1 gallon can 5 gallon pail 55 gallon drum

3MTM Tire Dressing is a solvent based silicone dressing that produces a deep black, glossy appearance on new and nearly new tires, and a deep black, natural appearance on older tires. Directions for Use: 1. Spray a thin, uniform coating onto a clean, dry tire. Wipe lightly with a clean, soft, terry cloth towel and allow to dry. 2. Remove overspray from wheels, hubcaps, or painted surfaces using a clean, soft dry terry cloth towel. DO NOT USE on motorcycles, bicycles, or other two-wheeled vehicles' tires or seats. Avoid spraying onto brake rotors, brake drums or brake pedals. Tips: - For a higher gloss appearance apply dressing and allow to dry without wiping. - For lower VOC requirements use 3MTM Engine and Tire Dressing (see page 34.) Product Safety and Health Information Source: Material Safety Data Sheet (MSDS 08-6461-1) or 3M Automotive Aftermarket Division 3M Center, Bldg. 223-6N-01 St. Paul, MN 55144-1000 Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501

35

PRODUCT INFORMATION

PAINT SHOP SAFE!

3MTM Silicone Free Tire Dressing

A solvent based, ready-to-use silicone free tire dressing. - PN 38327 (38227)* - PN 38328 (38228)* 1 gallon can 5 gallon pail

3MTM Silicone Free Tire Dressing is a solvent based silicone free dressing that produces a deep black, glossy appearance on new and nearly new tires, and a deep black, natural appearance on older tires. It is critical to follow the directions for use for 3MTM Silicone Free Tire Dressing to avoid the possibility of paint staining. Directions for Use: Note: Sling from some, particularly newer, tires may stain painted surfaces. To avoid staining, follow these instructions carefully. 1. Clean tires thoroughly using 3MTM All Purpose Cleaner and Degreaser 1:15 or stronger and scrub using a stiff bristle brush. 2. Thoroughly rinse the tires using a pressure washer and allow to dry. 3. Apply a thin, uniform coating of 3MTM Silicone Free Tire Dressing using a trigger sprayer, sponge applicator, or rag. Note: Use only a thin coating of dressing. A heavy coating may puddle around tire treads or raised lettering, and spatter even after the dressing dries. 4. Remove excess dressing using an absorbent cloth. 5. Allow dressing to dry completely before driving the vehicle. DO NOT USE on motorcycles, bicycles, or other two-wheeled vehicles' tires or seats. Avoid spraying onto brake rotors, brake drums or brake pedals. Product Safety and Health Information Source: Material Safety Data Sheet (MSDS 16-2924-5) or 3M Automotive Aftermarket Division 3M Center, Bldg. 223-6N-01 St. Paul, MN 55144-1000 Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501 * Part Number To Be Discontinued

36

PRODUCT INFORMATION

PAINT SHOP SAFE!

3MTM Perfect-ItTM III Cleaner Clay

A clay bar for removing overspray and environmental contaminates from a vehicle's exterior surfaces. - PN 38070 200 gram bar

3MTM Perfect-ItTM III Cleaner Clay is recommended for use in removing contaminants such as rail dust, paint overspray, and industrial fallout from exterior paint, glass, and metal surfaces. Directions for Use: Do not use in direct sunlight or on a hot surface. 1. Wash and rinse vehicle thoroughly using 3MTM Car Wash Soap. 2. Check exterior surfaces for contaminants ­ a rough or gritty feel. 3. Work contaminated areas with the clay using light pressure and 3MTM Car Wash Soap or 3MTM Perfect-ItTM Gloss Enhancer as a lubricant. 4. Rinse and dry surface. 5. Knead clay periodically to expose a new surface. Tips: - Use 3MTM Perfect-ItTM III Cleaner Clay with 3MTM Car Wash Soap as a lubricant while washing the vehicle, or use 3MTM Perfect-ItTM III Cleaner Clay with 3MTM Perfect-ItTM Gloss Enhancer (contains silicone) as a lubricant after the vehicle has been washed. Product Safety and Health Information Source: Material Safety Data Sheet (MSDS 08-5407-5) or 3M Automotive Aftermarket Division 3M Center, Bldg. 223-6N-01 St. Paul, MN 55144-1000 Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501

37

PRODUCT INFORMATION

3MTM Detail Polish 108

A light cutting very fine finishing polish. Contains silicones. - PN 38133 1 gallon bottle

3MTM Detail Polish 108 is a light cutting, very fine finishing polish recommended for use to remove light oxidation, fine scratches and stains, and leaves an excellent, high gloss finish on all types of automotive paints. To minimize the possibility of staining, do not apply in direct sunlight or onto a hot surface. Note: Contains silicones. Not recommended for use in body shop or paint shop applications. Directions for Use: Polish using an electric buffer (1000 to 2500 RPM) equipped with a 3MTM SuperbuffTM Polishing Pad or a 3MTM Perfect-ItTM Foam Polishing Pad. 1. Shake container before using. 2. Apply enough polish to the paint surface to work a 2' x 2' area. To minimize slinging, spread the polish over the surface with the pad before starting the machine. 3. Start the machine and buff using light-to-medium pressure. 4. Reduce pressure as polish begins to dry, and buff to a high gloss. Clean pad as necessary to assist cleanup. Tips: Excellent for the first step of a 2-step buffing procedure. Step 1 ­ Use 3MTM Detail Compound 308 with a 3MTM SuperbuffTM Compounding Pad to remove imperfections such as heavy oxidation, car wash scratches or other coarse scratches. Step 2 ­ Use 3MTM Detail Polish 208 with a 3MTM Perfect-ItTM Foam Polishing Pad to remove the compound swirl marks and product the best finish. Product Safety and Health Information Source: Material Safety Data Sheet (MSDS 08-5425-7) or 3M Automotive Aftermarket Division 3M Center, Bldg. 223-6N-01 St. Paul, MN 55144-1000 Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501

38

PRODUCT INFORMATION

3MTM Detail Polish 208

A medium cutting fine finishing polish. Contains silicones. - PN 38116 1 gallon bottle

3MTM Detail Polish 208 is a medium cutting, fine finishing polish recommended for use to remove oxidation, scratches and stains, and leaves a high gloss finish on all types of automotive paints. To minimize the possibility of staining, do not apply in direct sunlight or onto a hot surface. Note: Contains silicones. Not recommended for use in body shop or paint shop applications. Directions for Use: Polish using an electric buffer (1000 to 2500 RPM) equipped with a 3MTM SuperbuffTM Polishing Pad or a 3MTM Perfect-ItTM Foam Compounding Pad. 1. Shake container before using. 2. Apply enough polish to the paint surface to work a 2' x 2' area. To minimize slinging, spread the polish over the surface with the pad before starting the machine. 3. Start the machine and buff using light-to-medium pressure. 4. Reduce pressure as polish begins to dry, and buff to a high gloss. Clean pad as necessary to assist cleanup. Tips: Excellent for use with a 3MTM Perfect-ItTM Foam Compounding Pad to remove light oxidation, fine scratches, and stains and leaves a high gloss finish in a one step process. Product Safety and Health Information Source: Material Safety Data Sheet (MSDS 09-0268-4) or 3M Automotive Aftermarket Division 3M Center, Bldg. 223-6N-01 St. Paul, MN 55144-1000 Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501

39

PRODUCT INFORMATION

3MTM Detail Compound 308

A medium cutting fine finishing compound. Contains silicones. - PN 38105 1 gallon bottle

3MTM Detail Compound 308 is a medium cutting, fine finishing compound recommended for use to remove heavy oxidation, coarse scratches and stains, and leaves a medium gloss, fine swirl mark finish on all types of automotive paints. To minimize the possibility of staining, do not apply in direct sunlight or onto a hot surface. Note: Contains silicones. Not recommended for use in body shop or paint shop applications. Directions for Use: Compound using an electric buffer (1000 to 2500 RPM) equipped with a 3MTM SuperbuffTM Compounding Pad, or a 3MTM Perfect-ItTM Foam Compounding Pad. 1. Shake container before using. 2. Apply enough compound to the paint surface to work a 2'x2' area. To minimize slinging, spread the compound over the surface with the pad before starting the machine. 3. Start the machine and buff using light to medium pressure. 4. Reduce pressure as the compound begins to dry. Clean pad as necessary to assist cleanup. Tips: Excellent for the first step of a 2-step buffing procedure. Step 1 ­ Use 3MTM Detail Compound 308 with a 3MTM SuperbuffTM Compounding Pad to remove imperfections such as heavy oxidation, car wash scratches or other coarse scratches. Step 2 ­ Use 3MTM Detail Polish 208 with a 3MTM Perfect-ItTM Foam Polishing Pad to remove the compound swirl marks and product the best finish Product Safety and Health Information Source: Material Safety Data Sheet (MSDS 09-6468-4) or 3M Automotive Aftermarket Division 3M Center, Bldg. 223-6N-01 St. Paul, MN 55144-1000 Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501

40

PRODUCT INFORMATION

3MTM Detail Wax

A carnauba wax based durable liquid wax. Contains silicones. - PN 38111 1 gallon

3MTM Detail Wax is an easy to use, durable automotive wax recommended for use on new or like new paint finishes to produce a deep, high gloss, lustrous finish. To minimize the possibility of staining, do not apply in direct sunlight or onto a hot surface. Note: Contains silicones. Not recommended for use in body shop or paint shop applications. Directions for Use: 1. Apply a thin, uniform coating of wax to the paint surface, either by hand or with an orbital action tool equipped with a foam pad. Allow to dry to a haze. 2. Remove wax residue and buff to a high gloss using a soft, cotton terry cloth towel. Product Safety and Health Information Source: Material Safety Data Sheet (MSDS 09-2788-9) or 3M Automotive Aftermarket Division 3M Center, Bldg. 223-6N-01 St. Paul, MN 55144-1000 Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501

3MTM Perfect-ItTM Gloss Enhancer

A water based spray detailing product. Contains silicones. - PN 38113 - PN 38114 - PN 38115 1 gallon bottle 5 gallon pail 55 gallon drum (special order)

3MTM Perfect-ItTM Gloss Enhancer is a quick and easy, "spray on / wipe off" product that can restore a just waxed look and feel. 3MTM Perfect-ItTM Gloss Enhancer is also recommended for use as a spray detailing product to assist in the removal of buffing residue, and as a lubricant for claying a vehicle. Note: Contains silicones. Not recommended for use in body shop or paint shop applications. Directions for Use: Do not apply in direct sunlight or onto a hot surface. 1. Shake well before using. 2. Remove any grit that could scratch the paint surface. 3. Spray on and wipe off small areas ­ one panel at a time. 4. Remove any dried overspray with a damp cloth.

41

PRODUCT INFORMATION

3MTM Perfect-ItTM Gloss Enhancer

(CONTINUED) Tips: - For a clay lubricant, use enough 3MTM Perfect-ItTM Gloss Enhancer to completely wet the surface. After claying, wipe off the residue before it dries. Product Safety and Health Information Source: Material Safety Data Sheet (MSDS 08-3020-8) or 3M Automotive Aftermarket Division 3M Center, Bldg. 223-6N-01 St. Paul, MN 55144-1000 Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501

3MTM Performance Finish

A reactive silicone paint protector. Contains silicones. - PN 38112 - PN 39030 quart bottle pint bottle

3MTM Performance Finish is a reactive silicone based product that bonds to the paint surface providing a durable, long lasting and high gloss protective finish with exceptional water beading qualities. The application and removal characteristics make this product extremely easy to use leaving a high gloss wet look finish that is pleasing to the eye. It's more than a wax! Note: Contains silicones. Not recommended for use in body shop or paint shop applications. Directions for Use: 1. Apply a thin, uniform film to the paint surface, using a terry cloth wax applicator or a clean, soft, folded, cotton, terry cloth towel. Or use a random orbital polisher equipped with a clean, soft, terry cloth bonnet or DA equipped with soft foam pad. 2. Remove residue and buff to a high gloss using a 3MTM Microfiber Detail Cloth (PN 39016) or a clean, soft, cotton terry cloth towel. Or, with a polisher equipped with a clean, dry, terry cloth bonnet. 3. Complete method one panel at a time. Product Safety and Health Information Source: Material Safety Data Sheet (MSDS 18-5336-5) or 3M Automotive Aftermarket Division 3M Center, Bldg. 223-6N-01 St. Paul, MN 55144-1000 Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501

42

DETAILING FINAL EXAM

Detailing Final Exam

Wheel cause damage 1. 3MTM Heavy Dutywheels orCleaner will (may) poor condition on: a. Uncoated coated wheels in b. Glass c. Engines d. All of the Above The two recommended dilution ratios for 3MTM All Purpose Cleaner & Degreaser are: a. 1:15 and 1:25 b. 1:12 and 1:25 c. 1:15 and 1:30 d. 1:10 and 1:20 e. 1:8 and 1:16 Which of the following is a concern or a potential problem when buffing with a foam pad? a. Easy to use b. Runs hotter c. No lint d. Minimal swirls e. None of the above What product would you use to remove a coffee stain from a carpeted floor mat? a. 3MTM All Purpose Cleaner & Degreaser diluted 1:30 b. 3MTMAll Purpose Cleaner & Degreaser diluted 1:15 c. 3MTM Heavy Duty Wheel Cleaner d. 3MTM Gloss Enhancer e. None of the above What product would you recommend for removing hard water spots from a painted or plastic surface? a. 3MTM Heavy Duty Wheel Cleaner diluted 1:2 (Do not use on glass, engines, anodized wheels and/or wheels with no coating or with coating cracked or in poor condition.) b. 3MTM All Purpose Cleaner & Degreaser diluted 1:15 c. 3MTM Heavy Duty Wheel Cleaner undiluted (Do not use on glass, engines, anodized wheels and/or wheels with no coating or with coating cracked or in poor condition.) d. 3MTM All Purpose Cleaner & Degreaser diluted 1:30 e. None of the above If a product is diluted 1:8 and costs $18 per gallon, what is the cost per diluted gallon? a. $2.25 b. $2.00 c. $1.75 d. $1.50 e. None of the above

2. 3. 4. 5.

6.

43

DETAILING FINAL EXAM

7. If a product is diluted 1:15 and costs $24 per gallon, what is the cost per diluted gallon? a. $2.25 8. 9. 10.

b. $2.00 c. $1.75 d. $1.50 e. None of the above Silicones are not recommended for use in a body shop environment: K T K F 3MTM Detail Polish 108 cuts more than 3MTM Detail Compound 308: K T K F The recommended product for removing tar from a painted surface is: a. 3MTM Heavy Duty Wheel Cleaner diluted 1:2 (Do not use on glass, engines, anodized wheels and/or wheels with no coating or with coating cracked or in poor condition.) b. 3MTM All Purpose Cleaner & Degreaser diluted 1:15 c. 3MTM Heavy Duty Wheel Cleaner undiluted (Do not use on glass, engines, anodized wheels and/or wheels with no coating or with coating cracked or in poor condition.) d. 3MTM All Purpose Cleaner & Degreaser diluted 1:30 e. None of the above The recommended product for removing bug spatters is: a. 3MTM Heavy Duty Wheel Cleaner diluted 1:2 (Do not use on glass, engines, anodized wheels and/or wheels with no coating or with coating cracked or in poor condition.) b. 3MTM All Purpose Cleaner & Degreaser diluted 1:15 c. 3MTM Heavy Duty Wheel Cleaner undiluted (Do not use on glass, engines, anodized wheels and/or wheels with no coating or with coating cracked or in poor condition.) d. 3MTM All Purpose Cleaner & Degreaser diluted 1:30 e. None of the above When detailing a vehicle, it is recommended to begin washing it from the bottom because that is the dirtiest part: K T K F The polishes and compounds can or may be used with wool pads: K T K F There is no difference between 3MTM Heavy Duty Wheel Cleaner and competitive wheel cleaners: K T K F TrizactTM Abrasive Discs must always be used damp: K T K F

11.

12. 13. 14. 15.

ANSWERS: 1. d 2. c 3. b 4. b 5. a 6. b 7. d 8. T 9. F 10. e 11. b 12. F 13. T 14. F 15. T

44

ORDERING INFORMATION

Ordering Information

Exterior Cleaners

Part No.

38350 38351 38052 38070 38374 38375 38076 38377 38378 38079

| Product | Name

| | | | | | | | | | 3MTM All Purpose Cleaner & Degreaser (38050)* 3MTM All Purpose Cleaner & Degreaser (38051)* 3MTM All Purpose Cleaner & Degreaser 3MTM Perfect-ItTM III Cleaner Clay 3MTM Heavy Duty Wheel Cleaner (38074)* 3MTM Heavy Duty Wheel Cleaner (38075)* 3MTM Heavy Duty Wheel Cleaner 3MTM Car Wash Soap (38077)* 3MTM Car Wash Soap (38078)* 3MTM Car Wash Soap

| Container | Size

| | | | | | | | | | Gallon 5-Gallon Pail 55-Gallon Drum 1 Jar Gallon 5-Gallon Pail 55-Gallon Drum Gallon 5-Gallon Pail 55-Gallon Drum

| Cont. | Per Case

| | | | | | | | | | 4 1 1 6 4 1 1 4 1 1

Exterior Cleaners (Solvents)

Part No. | Product | Name | Container | Size | Cont. | Per Case

4 1 1 38080 | 3MTM Adhesive Remover 38081 | 3MTM Adhesive Remover 38082 | 3MTM Adhesive Remover | Gallon | | 5-Gallon Pail | | 55-Gallon Drum |

Exterior Dressings

Part No.

38124 38125 38126 38127 38128 38129 38327 38328

| Product | Name

| | | | | | | | 3MTM Engine and Tire Dressing 3MTM Engine and Tire Dressing 3MTM Engine and Tire Dressing 3MTM Tire Dressing 3MTM Tire Dressing 3MTM Tire Dressing 3MTM Silicone Free Tire Dressing (38227)* 3MTM Silicone Free Tire Dressing (38228)*

| Container | Size

| | | | | | | | Gallon 5-Gallon Pail 55-Gallon Drum Gallon 5-Gallon Pail 55-Gallon Drum Gallon 5-Gallon Pail

| Cont. | Per Case

| | | | | | | | 4 1 1 4 1 1 4 1

* Part number to be discontinued

45

ORDERING INFORMATION

Interior Cleaners

Part No.

38350 38351 38052 38095 38399 38300 38101 38221 38222

| Product | Name

| | | | | | | | | 3MTM All Purpose Cleaner & Degreaser (38050)* 3MTM All Purpose Cleaner & Degreaser (38051)* 3MTM All Purpose Cleaner & Degreaser 3MTM Extraction Cleaner* (See 38350) 3MTM Glass Cleaner (38099)* 3MTM Glass Cleaner (38100)* 3MTM Glass Cleaner 3MTM Premium Glass Cleaner 3MTM Premium Glass Cleaner

| Container | Size

| | | | | | | | | Gallon 5-Gallon Pail 55-Gallon Drum Gallon Gallon 5-Gallon Pail 55-Gallon Drum Gallon 5-Gallon Pail

| Cont. | Per Case

| | | | | | | | | 4 1 1 4 4 1 1 4 1

Interior Dressing

Part No. | Product | Name | Container | Size

| Gallon | 5-Gallon Pail

| Cont. | Per Case

| | 4 1

38086 | 3MTM Interior Dressing 38087 | 3MTM Interior Dressing

Waxes, Polishes & Compounds

Part No.

38105 38111 38113 38114 38115 38116 38133 38112 39030

| Product | Name

| | | | | | | | | 3MTM Detail Compound #308 3MTM Detail Wax 3MTM Perfect-ItTM Gloss Enhancer 3MTM Perfect-ItTM Gloss Enhancer 3MTM Perfect-ItTM Gloss Enhancer 3MTM Detail Polish #208 3MTM Detail Polish #108 3MTM Performance Finish 3MTM Performance Finish

| Container | Size

| | | | | | | | | Gallon Gallon Gallon 5-Gallon Pail 55-Gallon Drum Gallon Gallon Quart Pint

| Cont. | Per Case

| | | | | | | | | 4 4 4 1 1 4 4 6 6

Detailing Accessories

Part No.

37721 37712 37716 37717 37718 37720

| Product | Name

| | | | | | 3MTM Detailing Product Diluter 3MTM Detailing Diluter­ Single Product 3MTM Detailing Spray Bottle 3MTM Detailing GP Spray Nozzle 3MTM Detailing Solvent Spray Nozzle 3MTM Detailing Squeeze Bottle

| Container | Size

| | | | | | 1 Diluter 1 Diluter 1 Bottle 1 Spray Head 1 Spray Head 1 Bottle & Top

| Cont. | Per Case

| | | | | | 1 1 24 24 24 24

Note: For Diluter Service Parts, contact Shopware, Inc. 1-800-877-9344 * Part number to be discontinued

46

ORDERING INFORMATION

Ordering Information

(CONTINUED)

Sanding

Part No.

00850 00868 02023 02044 02045 02075 05274 05251 05291

| Product | Name

| | | | | | | | | 3MTM HookitTM II Finishing Film 3MTM HookitTM II Finishing Film 3MTM ImperialTM WetordryTM Paper Sheets 3MTM ImperialTM WetordryTM Paper Sheets 3MTM ImperialTM WetordryTM Paper Sheets 3MTM TrizactTM HookitTM II Foam Disc 6" 3MTM HookitTM II Soft Interface Pad 3MTM HookitTM II Disc Pad 3MTM HookitTM II Hand Pad 6"

| Grade |

| | | | | | | | | P1500 P1200 Micro Fine 1500 Micro Fine 2000 Micro Fine 2500 P3000 Pad Painters Pad Pad

| Sheets or | Quantity | Pads/Box | Per Case

| | | | | | | | | 50 50 50 50 50 15 6" Pad 6" Pad 6" Pad | | | | | | | | | 4 4 5 5 5 4 10 10 10

Compounding Pads

Part No.

05703 05704 05710 05717 05718 05719 05723 05737

| Product | Name

| | | | | | | | 3MTM SuperbuffTM III Buffing Pad 3MTM SuperbuffTM III 2 Plus 2 Buffing Pad 3MTM SuperbuffTM adapter 3MTM HookitTM SBSTM Backup Pad 3MTM Perfect-ItTM Backup Pad 3MTM Perfect-ItTM III Compounding Pad 3MTM Perfect-ItTM Foam Compounding Pad 3MTM Perfect-ItTM Plus Foam Compounding Pad

| Items | Per Unit

| | | | | | | | Pad Pad adapter Pad Pad Pad 2 Pads/Bag 1 Pad/Bag

| Quantity | Per Case

| | | | | | | | 6 6 10 1 1 24 12 6

47

ORDERING INFORMATION

Polishing Pads

Part No.

05717 05718 05733 05751 05725 05729 05739 05732 05738

| Product | Name

| | | | | | | | |

| Items | Per Unit

| Quantity | Per Case

| | | | | | | | | 1 1 6 6 6 12 12 12 6

3MTM HookitTM SBSTM Backup Pad | Pad 3MTM Perfect-ItTM Backup Pad | Pad 3MTM Perfect-ItTM Plus UltrafinaTM Foam Polishing Pad - 8" I 1 Pad/Bag I 2 Pads/Bag 3MTM Perfect-ItTM UltrafinaTM Foam Polishing Pad - 8" 3MTM Perfect-ItTM Foam Polishing Pad | 2 Pads/Bag 3MTM Perfect-ItTM Foam Polishing D/A Pad - 6" | 2 Pads/Bag 3MTM Perfect-ItTM HookitTM II Foam D/A Glazing Pad | 2 Pads/Bag 3MTM Perfect-ItTM HookitTM II DA Foam Application Pad - 6" I 2 Pads/Bag 3MTM Perfect-ItTM Plus Foam Polishing Pad | Pad

Detail Cloths

Part No. | Product | Name | Items | Per Unit

| 6 Cloths/Bag | 50 Cloths/Bag | 6 Cloths/Bag

| Quantity | Per Case

| | | 6 1 6

06016 | 3MTM Perfect-ItTM Detail Cloths 06017 | 3MTM Perfect-ItTM Detail Cloths ­ Bulk 06018 | 3MTM Perfect-ItTM Jumbo Detail Cloths

48

ORDERING INFORMATION

Ordering Information

(CONTINUED)

Spray Bottle Labels

60Number

60-4400-7328-0 60-4400-7329-8 60-4400-9926-9 60-4400-9925-1 60-4400-7339-7 60-4400-7576-4 60-4400-7346-2 60-4400-7341-3 60-4400-7331-4 60-4400-7343-9 60-4400-7340-5 60-4400-8404-8 60-4400-7344-7 60-4400-7332-2 60-4400-7614-3 60-4400-7345-4 60-4400-7342-1

| Product | Name

| | | | | | | | | | | | | | | | | 3MTM Heavy Duty Wheel Cleaner 3MTM Heavy Duty Wheel Cleaner/Concentrate 3MTM All Purpose Cleaner and Degreaser HD 1:15 3MTM All Purpose Cleaner and Degreaser LD 1:30 3MTM Glass Cleaner 3MTM Premium Glass Cleaner 3MTM Car Wash Soap 3MTM Adhesive Remover 3MTM Interior Dressing 3MTM Engine and Tire Dressing 3MTM Tire Dressing 3MTM Silicone Free Tire Dressing 3MTM Detail Polish #108 3MTM Detail Polish #208 3MTM Detail Polish #308 3MTM Detail Wax 3MTM Gloss Enhancer

| Labels Per Pack*

| | | | | | | | | | | | | | | | | 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25

*Please Order Per Pack Contact a 3M sales representative for more information: 3M Automotive Aftermarket Division 3M Center, Bldg. 223-6N-01 St. Paul, MN 55144-1000 Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501

49

50

3

Automotive Aftermarket Division 3M Center, Building 223-6N-01 St. Paul, MN 55144-1000 www.3M.com/automotive

3M is a trademark of 3M © 3M 2007 All rights reserved 60-4400-9939-2

Information

Detailing Manual v7

52 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

951697


You might also be interested in

BETA
untitled
2010_intro.indd
01-29 MZCG402
untitled
section_12_accessories_195-203