Read MF40_MF41.pdf text version

MF40-7043 Series, MF41-7073 Series, MF41-7153 Series

Spring Return DuraDrive ® Floating Actuator

For spring return applications that require floating control of dampers and valves in HVAC system.

Features: · 35 lb.-in. (4 N-m), 60 lb.-in (7 N-m), 133 lb.-in (15 N-m). · Direct mount to round or square damper shaft. · Overload protection throughout rotation. · True mechanical clockwise or counterclockwise spring return operation for positive close-off in airtight applications. · Visual position indicator. · Rotation limiting available. · MF41-7xxx manual override models.

US

US

0-7043 es, 1-7073 es, 1-7153 es

Model Chart

Actuator Power Input Running Model No. Shaft Size Stroke Voltage 50 Hz 60 HZ DC Amps VA W VA W Holding 50 Hz W 60 Hz W SPDT Auxiliary Switches Approximate Timing in Seconds @ 70°F (21°C) with No Load Powered Spring Return Output Torque Rating lb.-in. (N-m)

Manual Override

Min.a

Max. Stall

MF40-7043b 5/8" Dia. 1/2" Sq.

MF40-7043501b

95° ± 5° maximum, adjustable from 40 to 95° with an integral mechanical stop.

No 120 (14)

5.9 4.4 5.9 4.4

.17

2.9 2.9

Onec

<130

<25

35 (4)

No

MF41-7073 MF41-7073502 MF41-7153 MF41-7153502

a b c d

3/4" Dia. 1/2" Sq.

24 Vac ± 20% 22 to 30 95° ± 5° Vdc maximum, adjustable from 30 to 95° with AM-689 rotation limiter.

No 6.2 4.8 6.2 4.8 .18 2.8 2.8 Twod No 9.8 7.7 9.7 7.7 .30 3.3 3.3 Twod <190 <30 133 (15) <195 <30 60 (7)

160 (18) Yes 300 (34)

De-rating required for spring return actuators at low temperatures. With plenum-rated cable. One adjustable from 0 to 95 rotation (0 to 1 scale). One adjustable from 25 to 85 rotation and one set to operate @ 5 fixed.

Specifications

Inputs Control signal Power Connections Floating point control, 24 Vac. Refer to Model Chart. MF40-7073 and MF40-7153: 3 ft. (0.9 m) long, appliance cable, 1/2 in. conduit connectors. For M20 metric conduit, use AM-756 adapter. MF40-7043: 3 ft. (91 cm) plenum-rated cables. 1/2 in. conduit connectors. For M20 metric conduit, use AM-756 adapter.

101

MF40-7043 Series, MF41-7073 Series, MF41-7153 Series

Specifications (Continued)

Outputs Motor Type Brushless DC. One auxiliary switch available with MF40-7043-501, SPDT 6A resistive @ 24 Vac, adjustable 0 to 95 (0 to 1 scale). UL Listed, switch meets VDC requirements for 6 (1.5)A, 24 Vac. Two auxiliary switch available with MF40-7153-501 or MF40-7073-502, SPDT 7A resistive @ 24 Vac, one fixed @ 5 and one adjustable 0 to 95 . UL Listed, switch meets VDC requirements for 6 (1.5)A, 24 Vac. Position feedback voltage "AO": 2 to 10 Vdc (maximum 0.5 mA) output signal for position feedback or operation of up to four slave actuators. Control mode: Switch provided for selection of direct acting or reverse acting control mode on proportional models. Timing: Refer to Model Chart. Output torque rating: Refer to Model Chart. Position Indicator: MF40-704X: Visual indicator, 0 to 1 (0 is the spring return position). MF40-707X, MF40-715X: Pointer (-5 to 90°) and scale are provided for position indication (-5 is normal or spring return position). Stroke: Refer to Model Chart. Shipping and storage: -40 to 160 F (-40 to 71 C). Operating: -22 to 140 F (-30 to 60 C). 5 to 95% RH, non-condensing. MF40-704X: NEMA 2 (IEC 1P54). MF40-707X: NEMA 1, NEMA 2 (IEC IP54) with conduit in the down position. MF40-715X: NEMA 1, NEMA 2 (IEC IP54) with conduit in the down position. MF40-7043: 6-51/64 H x 4 W x 3-1/2 D in. (170 x 100 x 90 mm). MF41-7xxx: 10-1/2 H x 4 W x 3-1/2 D in. (270 x 100 x 90 mm). UL-873, Underwriters Laboratories Listed (File #9429 Category: Temperature-Indicating and Regulating Equipment). EMC Directive (89/336/EEC). Low Voltage Directive (72/23/EEC). Canadian Standards C22.2 No. 4-93. This product meets requirements to bear the C-Tick mark according to the terms specified by the Communications Authority under the Radio Communications Act 1992. Refer to F-26644.

Electrical

Mechanical

Environment Ambient Temperature limits Humidity Locations

Dimensions Agency Listings UL European Community CSA Australia General Instructions

Accessories

Model No. MF40-7043, MF40-7073, MF40-7153 AM-673a AM-674 AM-675 AM-676 AM-756 AM-714 MF40-7073, MF40-40-7153 AM-671abcd AM-672abcd AM-686 AM-687 AM-689 AM-690 AM-691 AM-692 AM-693ef AV-602 AV-607 MF40-7043 AM-709 AM-710 AM-711 AM-712e AM-713e AM-715e AV-605

a b c d e f

Description Mounting bracket. Weather shield. Weather shield base. Universal shaft extension, approximately 9-1/2 in. long (242 mm) for use on 3/8 to 11/16 in. (10 to 17 mm) round shafts, 3/8 to 9/16 in. square shafts. (AM-753 clamps required). Metric conduit adaptor M20 x 1.5 to 1/2 in. NPT (two per package). Weather shield. Mounting bracket. Mounting bracket. Position indicator. V-clamp. Rotation limiter. Crank arm. Crank arm. V-bolt. Crank arm kit. Valve linkage for VB-7xxx 1 to 2 in. Valve linkage VB-9xxx 2-1/2 to 4 in. Position indicator and stroke limiter. V-clamp. Crank arm adaptor kit. Crank arm adaptor kit Bracket. Crank arm adaptor kit. Valve linkage for VB-7xxx.

Drill appropriate mounting holes where needed. AM-693 crank arm kit required. Cannot be used with Mx40-634x or Mx40-717x series actuators. The large "C"-shaped clamps included in AM-693 crank arm kit are required for mounting the actuator. Drill appropriate mounting holes where needed. Use the self-tapping screws and flat washers provided in kit to mount actuator. AM-692 V-bolt kit required.

102

MF40-7043 Series, MF41-7073 Series, MF41-7153 Series

Typical Applications

1 24 Vac Transformer or 22 to 30 Vdc Black Red Blue Yellow/Black Typical Floating Controller 4 Common + Hot Drive CW Drive CCW Green/Yellow 3 MF41-7153 MF41-7073 2 3

Line Volts

1 Provide overload protection and disconnect as required. 2 Actuators may be wired in parallel. All actuator black wires are connected to the transformer common and all red wires are connected to the hot lead. Power consumption must be observed. If the controller uses a full-wave power supply and does not provide isolated outputs, a separate transformer is required. See EN206, F-26363 for details. As viewed from Left (L) side.

4

Figure 1 Typical Wiring Diagram For Floating Actuator.

1 24 Vac Transformer or 22 to 30 Vdc Line Volts 1 Provide overload protection and disconnect as required. Common Hot Red Blue Yellow/Black Hot 4 Drive CW Drive CCW Green/Yellow Controller Black 2 The Common connection from the actuator must be connected to the Hot connection of the controller. The actuator Hot must be connected to the controller Common. 3 If the controller uses a fullwave power supply and does not provide isolated outputs, a separate transformer is required.

Common

MF41-7153 MF40-7043 MF41-7073 2 3

4 As viewed from Left (L) side.

Figure 2 Typical Wiring Diagram with Triac Sink.

1 Line Volts

24 Vac Transformer or 22 to 30 Vdc

1 24 Vac Transformer or 22 to 30 Vdc Line Volts Black Common MF41-7153 MF40-7043 MF41-7173 2 Blue Yellow/Black 5 Drive CW Drive CCW Green/Yellow 4 3 1 Provide overload protection and disconnect as required. 2 Actuators may be wired in parallel. All actuator black wires are connected to the transformer common and all red wires are connected to the hot lead. Power consumption must be observed. 3 The actuator Hot must be connected to the controller Common. If the controller uses a fullwave power supply and does not provide isolated outputs, a separate transformer is required. As viewed from Left (L) side.

Hot

Common

Red

Hot

4

Controller 5

Figure 3 Typical Wiring Diagram with Triac Sink and Separate Transformers.

103

MF40-7173

Spring Return DuraDrive ® Floating Actuator

For spring return applications that require floating control of dampers and valves in HVAC system.

Features: · 150 lb.-in. (17 N-m) rated torque. · Direct mount to round or square damper shaft. · Overload protection throughout rotation. · True mechanical clockwise or counterclockwise spring return operation for positive close-off in tight seal damper applications. · Visual position indicator. · Oil immersed gear train provides continuous lubrication. · NEMA 4 housing (IEC IP56). · Automatic current sensing motor control provides extended reliability and repeatable timing.

US LISTED

F40-7173

Model Chart

Damper Actuators Actuator Power Input SPDT Auxiliary Switches Holding Approximate Timing in Seconds @ 70°F (21°C) with No Load Powered Spring Return

Model No.

Damper Shaft Sizea Voltage Watts

VA

Output Torque Rating lb.-in. (N-m)

Running 3/8 to 1/2 in. round or square 24 Vac ± 20%

Minimumb

Maximum Stall 450 (51)

MF40-7173

a b

5.5

10

4.3

No

<145

150 (17)

Optional AM-753 damper shaft mounting clamps for 5/8 in. square or 3/4 to 1 in. round shafts. De-rating required for spring return actuators at low temperatures.

Valve Actuator plus LInkages. Model No. a MF40-7173-200 MF40-7173-220 MF40-7173-230

a

Linkage (included) AV-602 AV-607 AV-609

Voltage 50/60 Hz

Running W

5.5 VA

Holding VA

SPDT Aux. Switches

24 Vac ± 20%

10

4.3

No

Refer to Valve Catalog, F-27384, for correct applications.

Specifications

Inputs Control signal Power Connections SPDT Floating point control, Triacs (500 mA rated), or 2 SPST contacts. Refer to Model Chart. 1/2 in. conduit ports for separation of Class 1 and Class 2 circuits. Power: Appliance cable.

104

MF40-7173

Specifications (Continued) Outputs

Motor Type Mechanical Environment Ambient Temperature limits Humidity Locations Dimensions Agency Listings UL European Community CUL Australia General Instructions UL-873, Underwriters Laboratories Listed (File #9429 Category: Temperature-Indicating and Regulating Equipment.) EMC Directive (89/336/EEC). Low Voltage Directive (72/23/EEC). Canadian Standards C22.2 No. 4-93. This product meets requirements to bear the C-Tick mark according to the terms specified by the Communications Authority under the Radio Communications Act 1992. Refer to F-26749. Shipping and storage: -40 to 160 F (-40 to 71 C). Operating: -25 to 140 F (-32 to 60 C). 5 to 95% RH, non-condensing. NEMA 1, NEMA 4 (IEC IP56) with customer supplied water tight connector. 10-27/32 H x 4 W x 4 D in. (280 x 100 x 100 mm). Brushless DC. Direction of rotation: CW or CCW rotation is available through reverse mounting. Dual shaft clamp: Direct coupled using a through hole output hub. Stroke: Electronically limited to 93 ± 1

Accessories

Model No. AM-674 AM-676 AM-751 AM-752 AM-753 AM-754 AM-756 AV-602 AV-607 Description Weather shield. Universal shaft extension, approximately 9-1/2 in. long (242 mm) for use on 3/8 to 11/16 in. (10 to 17 mm) round shafts, 3/8 to 9/16 in. square shafts. (AM-753 clamps required). Standard anti-rotation bracket 9 in. long x 13/16 in. wide (229 x 21 mm), included with actuator. Optional anti-rotation bracket 4 in. long x 1-11/16 in. wide (102 x 43 mm), for narrow spaces. Damper shaft mounting clamps for 5/8 in. square shaft, 3/4 in. and 1 in. round shafts (two per package). Standard universal mounting clamps for 3/8 to 1/2 in. (10 to 13 mm) round and square shafts, two included with actuator. Metric conduit adaptor M20 x 1.5 to 1/2 in. NPT (two per package). Valve linkage for VB-7xxx 1-1/2 to 2 in. Valve linkage for VB-9xxx 2-1/2 to 4 in.

105

MF40-7173

Typical Applications

1

Red White Black

4 CCW 4 CW COM

MF40-7173 2

Black 24 Vac 3 Black/Blue Green/Yellow

24H 24G GRD

1 SPDT Floating or Switch/Controller or 2 SPST. 2 Unused conduit port must remain plugged with a water tight pipe plug as shipped from factory to maintain NEMA Type 4 or IP56 rating. 3 Ground wire may be Green on some models. 4 As viewed from "L" side.

Figure 1 Typical SPDT Controller Wiring Diagram.

Controller 1

DOX DOY C 2 GRD AC

Red White Black

5 CCW 5 CW COM

MF40-7173 3

Black 24 Vac 4 1 Triacs switching to 24G. 2 Do not connect drive wiring to C terminal of controller. Black/Blue Green/Yellow

24H 24G GRD

3 Unused conduit port must remain plugged with a water tight pipe plug as shipped from factory to maintain NEMA Type 4 or IP56 rating. 4 Ground wire may be Green on some models. 5 As viewed from "L" side.

Figure 2 Typical Triacs Switching to 24G Wiring Diagram of Actuator.

106

MF41-60xx Series

Non-Spring Return DuraDrive ® Floating Actuator

The DuraDrive direct coupled 24 Vac non-spring return rotary electric actuators are designed for three-position (floating) control of dampers.

Features: · Compact, lightweight design. · Manual override. · Factory pre-positioned at 5 from 0 to assure damper or valve close-off. · Plenum cabling. · Feedback potentiometer models available. · cUL and UL listed; plenum versions also CE certified. · Independently adjustable dual auxiliary switches available. Model Chart

Damper Actuators. Actuator Power Input With Potentiometer SPDT Auxiliary Switches Approximate Timing in Seconds @ 70°F (21°C) with No Load Output Torque Rating lb.-in. (N-m) Minimum

90

45

90

US LISTED

F41-60xx ries

Model No.

Shaft Size Voltage

VA Running

50 Hz MF41-6043 MF41-6043-510 MF41-6043-502 MF41-6083 MF41-6083-510 MF41-6083-502 3/8 to 5/8 in. dia. 1/4 to 1/2 in. sq. 24 VAC +20%-15% No Yes 2.3 No No Yes No No No Two No No Two 150 108

60 HZ 90

35 (4)

125

70 (8)

Valve Actuator plus LInkages. Model No. a MF41-6043-200 MF41-6043-202 MF41-6083-200 MF41-6083-202

a

Linkage (included)

Voltage 50/60 Hz

Running VA

SPDT Aux. Switches No

AV-603

24 Vac + 20% -15%

2.3

Yes No Yes

Refer to Valve Catalog, F-27384, for correct applications.

Specifications

Inputs Control signal Power Connections Outputs MF41-60xx-510: Feedback potentiometer: 0 to 1000 < 10 mA. MF41-60xx-502: Auxiliary switch contact rating, AC rating: 24 Vac, 4A Resistive, 2A Inductive. DC Rating: 12 to 30 Vdc, DC 2A. Switching Hysteresis: 2° Floating three position control, 24 Vac. 24 Vac +20/-15% 50/60 Hz. Power Consumption: 2.3 VA MF41-6083: 24 Vac +20/-10% at 90 to 130°F (32 to 55°C) ambient. 3 ft. (0.9 m) long, 18 AWG leads, plenum-rated.

107

MF41-60xx Series

Specifications (Continued)

Environment Ambient temperature limits Humidity Locations Dimensions Agency Listings UL European Community CUL General Instructions UL-873, Underwriters Laboratories. EMC Directive (89/336/EEC). Emissions (EN50081-1). Immunity (EN50082-2). Canadian Standards C22.2 No. 24-93. Refer to F-27213. Shipping and Storage: -40 to 158 F (-40 to 70 C). Operating: -25 to 130 F (-32 to 55 C). 5 to 95% RH, non-condensing. NEMA 2, IP54 to EN60529. 5-7/16 H x 2-3/4 W x 2-3/8 D in. (140 x 70x 60 mm).

Accessories

Model No. AM-726 AM-727 AM-728 AM-729 AV-603 Description Rotary to linear bracket. Rotary to linear crank arm adaptor Conduit adaptor. 3/8 in. shaft adaptor. Valve linkage for VB-7xxx 1/2 to 2 in.

Typical Applications

1 Line Volts

24 Vac Transformer 24 Vac Neut Orange CCW (7) Red Violet 2 (1) CW (6) MF41-60x3

1 Provide overload protection and disconnect as required. Earth Ground isolating class 2 Transformer. CE: Safety Isolating Transformer per EM 60742 2

1000

Feedback Potentiometer MF41-60x3-510

P1 Feedback 0-100% P1 - P2, Black P2 Feedback Common, Black P3 Feedback 100 to 0% P3- P2, Black

Actuators are provided with color coded wires. Wire numbers are provided for reference.

Auxilary Switch 1 MF41-60x3-502 Auxilary Switch 2 MF41-60x3-502

S1 Common, Black S2 N.C., Black S3 N.O., Black S4 Common, Black S5 N.C., Black S6 N.O., Black

Figure 1 Typical Wiring Diagram for MF41-60x3-2xx Floating Actuators.

108

MF41-6153 Series

Non-Spring Return DuraDrive ® Three Position Actuator

The DuraDrive direct-coupled, 24 Vac, non-spring return electronic actuator is designed for threeposition control of building HVAC dampers.

Features: · Synchronous motor technology with stall protection. · Unique self-centering shaft coupling. · Manual override. · 133 lb-in (15 Nm) torque. · Factory pre-positioned at 5 from 0 to assure damper or valve close-off. · Mechanical range adjustment capabilities. · Offset and span adjustment models available. · Built-in 1/2-inch conduit connection.

US LISTED

F41-6153 ries

Model Chart

Damper Actuators. Power Input @ 50/60 Hz SPDT Auxiliary Switches Approximate Timing in Seconds @ 70oF (21o C) with No Load 50 Hz No 150 60 Hz 125 133 lb-in (15 Nm) Output Torque Rating lb-in (Nm)

Model No.

Shaft Size

Motor Type Voltage

Running

VA MF41-6153 1/4 to 3/4 in. dia. 1/4 to 1/2 in.sq. Synchronous 24 Vac + 20% - 15% 3

W 3

Valve Actuator plus LInkages. Model No.a MF41-6153-200 MF41-6153-220

a

Running

Linkage (included) AV-605 AV-607

Voltage 50/60 Hz W

24 Vac ± 20% 3 VA 3

SPDT Aux. Switches No

Refer to Valve Catalog, F-27384, for correct applications.

Specifications

Inputs Control signal Power Connections Electrical Floating three position control, 24 Vac. All 24 Vac circuits are Class 2. 24 Vac +20/-15% @ 50/60 Hz. Running VA: 3 @ 3 W. 3 ft. (0.9 m) long, 18 AWG leads. Timing: 150 seconds @ 50 Hz; 125 seconds @ 60 Hz. Output torque rating: 133 lb-in. (15 N-m). Mechanical Stroke: Normal angle of rotation is 90 , limited to a maximum of 95 . Field adjustable to limit travel on either end of stroke. Position indicator: Adjustable pointer is provided for position indication.

109

MF41-6153 Series

Specifications (Continued)

Environment Ambient temperature limits Humidity Locations Dimensions Agency Listings UL European Community CUL General Instructions UL-873, Underwriters Laboratories. EMC Directive (89/336/EEC). Emissions (EN50081-1). Immunity (EN61000-6-2). Canadian Standards C22.2 No. 24-93. Refer to F-27215. Operation: -25 to 130 F (-32 to 55 C) Storage: -40 to 158 F (-40 to 70 C). 5 to 95% RH, non-condensing. NEMA Type 1, IP54 According to EN 60 529. 8-3/8 H x 3-1/4 W x 2-2/3 D in. (210 x 80 x 70 mm).

Accessories

Model No. AV-605 AV-607 Description Valve linkage for VB-7xxx 1-1/2 to 2 in. Valve linkage for VB-9xxx 2-1/2 to 4 in.

Typical Applications

1 Line Volts 24 Vac Transformer Red Violet 1 6 MF41-6153 CW

SPDT Floating Controller

Orange

7

CCW

Figure 1 Typical Wiring Diagram for MF41-6153 Floating Actuators.

110

MF41-6343

Non-Spring Return DuraDrive ® Floating Actuator

For non-spring return applications that require floating control of dampers and valves in HVAC systems.

Features: · Direct mount to round or square damper shaft. · 300 lb.-in. (34 N-m) torque rating. · Overload protection throughout rotation. · Oil immersed gear train provides continuous lubrication. · NEMA 4 housing (IEC IP56). · Manual override to allow positioning for installation and manual operation. · Provide floating point control (drive open-hold-drive closed).

US

F41-6343

Model Chart

Damper Actuators. Actuator Power Input VA Model No. Damper Shaft Sizea Voltage 5-/60 Hz Watts Running VA MF41-6343

a

SPDT Auxiliary Holding Switches W 3.6 No

Approximate Timing in Seconds @ 70°F (21°C) with No Load

Output Torque Rating lb.-in. (N-m) Maximum Stall 600 (68)

Minimum 300 (34)

3/8 to 1/2 in. round or square

24 Vac ± 20%

3.8

7.1

<145

Optional AM-753 damper shaft mounting clamps for 5/8 in. square or 3/4 to 1 in. round shafts.

Valve Actuator plus LInkages. Model No.a MF41-6343-230

a

Linkage (included) AV-609

Voltage 50/60 Hz

24 Vac ± 20%

Running W

3.8 VA 7.1

Holding VA 3.6

SPDT Aux. Switches No

Refer to Valve Catalog, F-27384, for correct applications.

Specifications

Inputs Control signal Power Connections Outputs Motor Type Brushless DC. Direction of rotation: CW or CCW rotation is available through reverse mounting. Mechanical Dual shaft clamp: Direct coupled using a through hole output hub. 3/8 to 1/2 in. round or square shafts standard. Position indicator: Pointer and scale numbered from 0 to 95 . Stroke 93 ±1 . See Accessories for larger shaft sizes. SPDT floating control input, triacs (500 mA rated) or 2 SPST contacts. Refer to Model Chart. All 24 Vac circuts are Class 2. 24 in. (61 cm) appliance cables. Conduit connector for M20 metric conduit use AM-756 adapter.

111

MF41-6343

Specifications (Continued)

Environment Ambient Temperature limits Humidity Locations Agency Listings UL European Community CUL Australia General Instructions UL-873, Underwriters Laboratories Listed (File #9429 Category: Temperature-Indicating and Regulating Equipment). EMC Directive (89/336/EEC). Low Voltage Directive (72/23/EEC). Canadian Standards C22.2 No. 4-93. This product meets requirements to bear the C-Tick mark according to the terms specified by the Communications Authority under the Radio Communications Act 1992. Refer to F-26744. Shipping and Storage: -40 to 160 F (-40 to 71 C). Operation: -25 to 140 F (-32 to 60 C). 5 to 95% RH, non-condensing. NEMA 1, NEMA 4 (IEC IP56) with customer supplied water tight connectors.

Accessories

Model No. AM-674 AM-676 AM-751 AM-752 AM-753 AM-754 AM-755 AM-756 AV-609 Description Weather shield. Universal shaft extension, approximately 9-1/2 in. long (242 mm) for use on 3/8 to 11/16 in. (10 to 17 mm) round shafts, 3/8 to 9/16 in. square shafts. (AM-753 clamps required). Standard anti-rotation bracket 9 in. long x 13/16 in. wide (229 x 21 mm), included with actuator. Optional anti-rotation bracket 4 in. long x 1-11/16 in. wide (102 x 43 mm), for narrow spaces. Damper shaft mounting clamps for 5/8 in. square shaft, 3/4 in. and 1 in. round shafts (two per package). Standard universal mounting clamps for 3/8 to 1/2 in. (10 to 13 mm) round and square shafts, two included with actuator. Manual override crank. Metric conduit adaptor M20 x 1.5 to 1/2 in. NPT (two per package). Valve linkage for VB-9xxx 5 and 6 in.

Typical Applications

1

Red White Black

4 CCW CW COM

MF41-6343 2

Black 24 Vac 3 Black/Blue Green/Yellow

24H 24G GRD

1 SPDT Floating or Switch/Controller or 2 SPST. 2 Unused conduit port must remain plugged with a water tight pipe plug as shipped from factory to maintain NEMA Type 4 or IP56 rating. 3 Ground wire may be Green on some models. 4 As viewed from Left (L) side.

Figure 1 Typical SPDT Controller Wiring Diagram.

112

MF41-6343

5 Controller 1 DOX DOY C 2 GRD AC Black 24 Vac 4 1 Triacs switching to 24G. 2 Do not connect drive wiring to C terminal of controller. Black/Blue Green/Yellow 24H 24G GRD Red White Black CCW CW COM

MF41-6343 3

3 Unused conduit port must remain plugged with a water tight pipe plug as shipped from factory to maintain NEMA Type 4 or IP56 rating. 4 Ground wire may be Green on some models. 5 As viewed from Left (L) side.

Figure 2 Typical Triacs Switching to 24G Wiring Diagram of Actuator.

113

Information

13 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

608430