Read 700AMERDRAIN.cdr text version

®

700 Sheet Drain

PRODUCT DESCRIPTION

700 sheet drain is a three-part prefabricated soil sheet drain consisting of a formed and punched polystyrene core covered on both sides with a non-woven, needle-punched polypropylene filter fabric. The fabric is bonded to each dimple to prevent soil intrusion into the water channel, and allows the water to pass into the drain core while restricting the movement of soil particles which might clog the core. The holes punched in the core allows water to enter from both sides.

AMERDRAIN

INSTALLATION INSTRUCTIONS

DRAIN ATTACHMENT METHODS: For attaching drain to waterproofing material, concrete or wood, several methods may be used including metal stick pins, nails driven through washers or wood lathing, construction adhesives or double sided tape. Discuss materials compatibility with waterproofing supplier before using adhesives. Typically any method used for attaching waterproofing protection board will work with drain. To attach drain to bare earth, use 4"- 8" anchor pins with washers. VERTICAL : AMERDRAIN 700 may be installed either vertically (perpendicular to the surface) or horizontally (parallel to the surface). When installed vertically, the core flange should be at the upstream edge. This flange position minimizes seepage of water behind the drain similar to the way roof shingles work. When installed horizontally, the edge of the core with the flange should be at the top. HORIZONTAL: The edge of the core with the flange should be at the upstream side of the plaza. BACKFILLING: Soil should be placed and compacted directly against the drain. Direct compactor exhaust away from drain to prevent damage. Backfill to a minimum 6" above drain to allow for coverage after settlement. Detailed instructions for installation termination are available upon request. and

BASIC USES

AMERDRAIN 700 sheet drain is designed for trench and French drains, slope drainage, or any other application requiring a drain allowing water entry from both sides.

PACKAGING

! !

4' x 50', 52' or 104' Rolls Available in different widths and lengths upon request.

COLLECTION SYSTEMS

AMERDRAIN 700 sheet drain can be used with AMERDRAIN TOTAL-DRAINTM sheet drain .

A

W

D

1209 Airport Road · Monroe, NC · 28110, USA 800 242-WICK·704 238-9200· Fax 704 296-0690 www.americanwick.com · [email protected]

®

700 Sheet Drain

TEST METHOD

Technical Data

PHYSICAL PROPERTIES TYPICAL US VALUE TYPICAL SI VALUE

FABRIC PROPERTIES Material Grab Tensile Strength Puncture Strength Trapezoidal Tear Mullen Burst Strength Elongation EOS (AOS) Permittivity Permeability Flow Rate UV Resistance (After 500 hrs.) CORE PROPERTIES Material Thickness Compressive Strength PRODUCT PROPERTIES Flow Capacity per unit width Roll length Roll width Roll weight 16 gal/min/ft 50 ft 4 ft 41 lbs 200 L/min/m 15.24 m 1.22 m 19 kg ASTM D-4716 Polystyrene 7/16 inch 15,000 lbs/ft2 Polystyrene 11 mm 732 kN/m2 Polypropylene 110 lbs 65 lbs 50 lbs 215 psi 60% 100 sieve -1 3.1 sec 0.12 in/sec 150 gal/min/ft2 70% Polypropylene 485 N 285 N 220 N 1430 kPa 60% 150 micron 3.1 sec-1 0.3 cm/sec 6110 L/min/m2 70% ASTM D-4632 ASTM D-4833 ASTM D-4533 ASTM D-3786 ASTM D-4632 ASTM D-4751 ASTM D-4491 ASTM D-4491 ASTM D-4491 ASTM D-4335

ASTM D-1621 (Mod.)

All information, drawings and specifications are based on the latest product information available at the time of printing. Constant improvement and engineering progress make it necessary that we reserve the right to make changes without notice. All physical properties are typical values. Standard variations in mechanical properties of 10% and in hydraulic properties of 20% are normal.

A

W

D

1209 Airport Road · Monroe, NC · 28110, USA 800 242-WICK·704 238-9200· Fax 704 296-0690 www.americanwick.com · [email protected]

Information

700AMERDRAIN.cdr

2 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

322864