Read ACO-K9-en_Kap01 - Drains.pdf text version

Section contents

Plastic drains

1

Floor drainage

Drains

Plastic Page 54 55 Drain body, Socket inclination: 90° Drain body DN 50 Drain body, Socket inclination: 1.5° Drain body Flatline, Socket inclination: 1,5° Drain body DN 70/DN 100 Drain body, Socket inclination: 90° Drain body, Socket inclination: 1.5° Top sections DN 50 ­ DN 70/DN 100 Accessories DN 50 ­ DN 70/DN 100 Drain body, Socket inclination: 90° Drain body DN 50 Drain body, Socket inclination: 1.5° Drain body Flatline, Socket inclination: 1,5° Drain body DN 70/DN 100 Drain body, Socket inclination: 90° Drain body, Socket inclination: 1.5° Accessories DN 50 ­ DN 70/DN 100 58 58 59 60 61 62 66 68 69 70

Basics Easyflow top sections

Floor drains Easyflow

72 73 74 75

Cellar drain

Drain DN 100

Drain, Socket inclination: 1,5° Accessories

53

K9/1

Drains Plastic

Complete drains Easyflow

71

1

Drains Planning references

Soil drainage

Drains

Plastic

Basics

Range of application

ACO plastic floor drains in accordance with DIN EN 1253 are suitable for use in single and multi-family buildings without fire safety requirements. In conjunction with appropriate seals, they provide an equally safe efficient way of drainage. The already assembled standard plastic drains are delivered complete and ready for installation. The drain bodies can be expanded with practical accessories.

Serviceability

In addition to numerous application possibilities, the ACO plastic drains also convince in terms of hygiene and easy cleaning: The odour seal can be easily removed for an unimpeded access to the connected piping. Moreover, the barrierfree arrangement of the drain pipe end completely empties the drain body and flushing out of foreign bodies is easier.

The plastic material

Modern plastic floor drains are mainly made of PP and ABS. The drain bodies are mainly produced of PP, because this material is particularly distinguished by its good stress cracking resistance and chemical resistance. In addition, it is solid (stiff) and impact resistant. The disadvantages are its properties at low temperatures or in the high temperature range. The material is therefore only suitable for the frost-free area - and only for the discharge of hot waste water. Stainless steel floor drains are generally used for this application. The top sections are primarily made of ABS. They must be particularly hard and impact resistant.

Easyflow ­ powerful, safe and versatile

Basic body with integral seal The seal of all basic bodies is attached to the top section. The processor has the certainty that no leaks can develop when assembling the top section due to the seal sliding out. Hydraulic peak values The odour seal can be completely removed by pulling lightly. Then an optimum pipe cleaning is possible on the inlet side as well as the drain side. Since the drains have no narrowing at the supply line and drain, an ideal inspection opening is created by this drain system. The DIN EN 1253 defines minimum drainage values for floor drains. The ACO floor drains surpass these values significantly. Drains DN 50, DN 70 and DN 100 reach drainage values up to 1.8 l / s. DN 70 and DN 100 in one drain Optimum cleaning Height-adjustable top section

Drains Plastic

All floor drains are equipped with a heightadjustable, rotating top section. The slotted grating is made from high quality stainless steel.

With just one floor drain, the connection dimensions DN 70 and DN 100 are met. This eliminates an additional variant. This means more flexibility at the construction site for the processor.

54

K9/1

Soil drainage

Drains

Plastic

Drains Planning references

1

Easyflow top sections

Combined with top sections of plastic with stainless steel frame

If other solutions are required in addition to the standard top sections, the entire drain range can be combined with the new Easyflow design top sections. The top sections with stainless steel frames are available in a square shape with frame dimensions of 149 x 149 mm, as well as a round design, Ø 136 mm. The top sections are equipped with a solid stainless steel slotted grating. Moreover, a narrow, circular drainage opening can be realized with the top section for a selectable surface.

The entire range is also available for the alternative sealing of the thin bed process . The thin bed attachment has an additional fixed and loose flange which makes a secure connection to the sealing layer to the top section possible.

A sealing collar (included) is embedded into the sealer and pressed into the loose flange of the top section to connect the alternative sealing. When applying the sealing substance or filler and the tile adhesive, the manufac-

turer's specifications and applicable standards and regulations must be observed.

Top sections with or without lock

The square top sections with solid stainless steel grating can be selected as loosely inserted or lockable version depending on the application.

Maintenance

By inserting the two noses of the grating into the appropriate guide of the top section, the grating is guaranteed to snap in at both the loosely inserted, as well as the locking grate. The grating is locked and unlocked by turning the cover by 90°. A stop that prevents overturning is integrated. The closure device is securely fixed in the frame when locked. In the unlocked state, the grate lifts easily out of the frame and therefore can be easily removed.

Insert the grate first with the tabs.

Lock or unlock the grate by turning the closure device 90°.

Unlocked grate

55

K9/1

Drains Plastic

1

Drains Planning references

Soil drainage

Drains

Plastic

Floor drain assembly

The ACO plastic floor drains allow various combinations based on a modular system. Perfectly coordinated function solutions can therefore be realized for individual installation situations and application scopes.

Top section with inserted stainless steel grate

Thin bed flange - with sprayed on fleece for alternative sealing, can be pushed onto top sections

Extension of 160 mm (for a floor structure larger than 87 mm, from the first sealing level), with a recess for the compression-sealing flange

Drains Plastic

Compression-sealing flange with stainless steel loose flange (can be attached to the drain body)

Removable odour seal, allows for easy cleaning of the drain and the connected pipe

Outlet socket DN 70/DN 100 in a drain body

Inlet DN 50, optional on all horizontal drains

Continuous soil without standing water in the drain body

56

K9/1

Soil drainage

Drains

Plastic

Drains Planning references

1

57

K9/1

Drains Plastic

1

Floor drains Easyflow Drain body DN 50

Floor drainage

Drains

Plastic

Drain body, Socket inclination: 90°

Product information

ACO product advantages Upgradeable compression sealing flange Optimal cleaning Height adjustable thin bed seal Floor drain DN 50 Plastic Certified in accordance with EN 1253 With reinforcement/connecting rim With removable odour seal Water trap: 50 mm With integrated seal for sealing the annulus between the drain body and top section With protective cover during construction period

Ordering information

Design Lateral inlet Recess [mm]

Ø149 Ø125

Outflow value [l/s]

Weight [kg]

Article No.

114

167

Standard

Without

200 x 200

1,6

0,5

2500.55.00

DN50

Drains Plastic

Drain body, Socket inclination: 1.5°

Product information

ACO product advantages Upgradeable compression sealing flange Optimal cleaning Height adjustable thin bed seal Floor drain DN 50 Plastic Certified in accordance with EN 1253 With reinforcement/connecting rim With removable odour seal Water trap: 50 mm With integrated seal for sealing the annulus between the drain body and top section With protective cover during construction period

Ordering information

Design Lateral inlet Recess [mm]

Ø149 Ø125

Outflow value [l/s]

Weight [kg]

Article No.

102

Standard

DN50

Without

200 x 260

1,5

0,5

2500.05.00

194

58

K9/1

Floor drainage

Drains

Plastic

Floor drains Easyflow Drain body DN 50

1

Design

Lateral inlet

Recess [mm]

Outflow value [l/s]

Weight [kg]

Article No.

Ø149 Ø125

DN50

102

Standard

DN50

With

200 x 330

1,5

0,5

2500.00.00

231

Drain body Flatline, Socket inclination: 1,5°

Product information

ACO product advantages Upgradeable compression sealing flange Optimal cleaning Height adjustable thin bed seal Floor drains DN 50 Plastic With reinforcement/connecting rim Minimal ground structure: 97 mm With removable odour seal Water trap: 30 mm With integrated seal for sealing the annulus between the drain body and top section With protective cover during construction period

Ordering information

Design Lateral inlet Recess [mm]

Ø149 Ø125

[kg]

82

Flatline

DN50

Without

200 x 260

0,8

0,4

2505.05.00

194 Ø149 Ø125

Flatline

82 DN50 DN50

With

200 x 330

0,8

0,4

2505.00.00

231

59

K9/1

Drains Plastic

Outflow value [l/s]

Weight

Article No.

1

Floor drains Easyflow Drain body DN 70/DN 100

Floor drainage

Drains

Plastic

Drain body, Socket inclination: 90°

Product information

ACO product advantages Upgradeable compression sealing flange Optimal cleaning Height adjustable thin bed seal Floor drain DN 70/DN 100 Plastic Certified in accordance with EN 1253 With reinforcement/connecting rim With removable odour seal Water trap: 50 mm With integrated seal for sealing the annulus between the drain body and top section With protective cover during construction period

Ordering information

Design Lateral inlet Recess [mm]

Ø149

Outflow value [l/s]

Weight [kg]

Article No.

Ø125

167

105

Standard

Without

200 x 200

2,0

0,6

2700.55.00

Drains Plastic

DN40

DN100

60

K9/1

Floor drainage

Drains

Plastic

Floor drains Easyflow Drain body DN 70/DN 100

1

Drain body, Socket inclination: 1.5°

Product information

ACO product advantages Upgradeable compression sealing flange Optimal cleaning Height adjustable thin bed seal Floor drain DN 70/DN 100 Plastic Certified in accordance with EN 1253 With reinforcement/connecting rim With removable odour seal Water trap: 50 mm With integrated seal for sealing the annulus between the drain body and top section With protective cover during construction period

Ordering information

Design Lateral inlet Recess [mm]

Ø149 Ø125

Outflow value [l/s]

Weight [kg]

Article No.

Standard

137

DN100 DN70

Without

200 x 310

1,8

0,6

2700.05.00

210

137

250

DN100

Standard

With

200 x 350

1,8

0,6

2700.00.00

DN70

61

K9/1

Drains Plastic

Ø149 Ø125

1

Floor drains Easyflow Drain body DN 50/DN 100

Floor drainage

Drains

Plastic

Top sections for DN 50 ­ DN 100

Top sections standard

Ordering information Design Frame [mm] Standard configuration

150

Grating [mm]

Height adjustability [mm]

Description

Weight [kg]

Article No.

100

Ø125

Plastic

Plastic 150 x 150

Slotted grating Stainless steel 142 x 142 K3

15 ­ 96

Loosely inserted

0,4

2700.77.11

6

Plastic

Plastic 100 x 100

Slotted grating Stainless steel 95 x 95 K3

7 ­ 75

Loosely inserted

0,2

2500.77.11

Drains Plastic

90

Ø125

Stainless steel

Stainless steel 150 x 150

Perforated grating Stainless steel 136 x 136 K3

25 ­ 60

Screwed

0,9

2700.77.12

136 150

Loosely inserted Stainless steel 149 x 149 Slotted grating Stainless steel 140 x 140 K3

0,9

5141.22.00

Plastic

18 ­ 135

Lockable

0,9

5141.23.00

62

Remark: Top sections with slot width 8 mm are suitable for barefoot areas.

K9/1

Infobox

Floor drainage

Drains

Plastic

Floor drains Easyflow Drain body DN 50/DN 100

1

Design

Frame [mm]

Grating [mm]

Height adjustability [mm]

Description

Weight [kg]

Article No.

Plastic

Stainless steel 149 x 149

Plastic/ Stainless steel 130 x 130

26 ­ 135

Loosely inserted Top section for selectable surface Interior dimensions: 121 x 121 mm

0,6

5141.24.00

150

8

Ø136

Ø125 6

Plastic

Stainless steel 136

Slotted grating Stainless steel 127 K3

8 ­ 135

Loosely inserted

0,6

5141.25.00

Remark: Top sections with slot width 8 mm are suitable for barefoot areas.

K9/1

63

Infobox

Drains Plastic

1

Floor drains Easyflow Drain body DN 50/DN 100

Floor drainage

Drains

Plastic

Top sections for thin bed sealing

Ordering information

Design

Frame [mm]

Grating [mm]

Height adjustability [mm]

Description

Weight Article No. [kg]

Standard configuration

Loosely inserted

1,3

5141.29.00

Sealing ring

Stainless steel 148 x 148

Slotted grating Stainless steel 140 x 140 K3

36 ­ 135

Lockable

1,3

5141.30.00

Drains Plastic

Plastic Sealing ring

Stainless steel 149 x 149

Plastic/ Stainless steel 130 x 130

36 ­ 135

Top section for selectable surfaces Interior dimensions: 121 x 121 mm

0,9

5141.31.00

64

Remark: The included sealing colar (OD = 350 mm) can be selectively bended. Top sections with slot width 8 mm are suitable for barefoot areas.

K9/1

Infobox

Floor drainage

Drains

Plastic

Floor drains Easyflow Drain body DN 50/DN 100

1

Design

Frame [mm]

Grating [mm]

Height adjustability [mm]

Description

Weight Article No. [kg]

Ø350 Ø252 Ø136 9 150 Ø125

6

Sealing ring

Stainless steel 136

Slotted grating Stainless steel 127 K3

36 ­ 135

Loosely inserted

1,1

5141.32.00

K9/1

Remark: The included sealing colar (OD = 350 mm) can be selectively bended. Top sections with slot width 8 mm are suitable for barefoot areas.

65

Infobox

Drains Plastic

1

Floor drains Easyflow Drain body DN 50/DN 100

Floor drainage

Drains

Plastic

Accessories

Designation

17

compatible with

Extension

All floor drains Easyflow Top sections Socket diameter: 125 mm

Ø125

Description Plastic Suitable for accepting plastic top sections and compressionsealing flanges With lip seal For deepened installation of floor drains Weight: 0.1 kg Plastic flange with infed fleece Suitable for accepting customer-side mounted fluid seals in thin bed procedure Weight: 0.2 kg

Article No.

178

2040.00.00

Thin-bed flange

All top sections Easyflow 2500.77.11 2700.77.11 2700.77.12 Top sections with socket diameter: 125 mm

2040.00.01

Compression sealing flange

All floor drains Easyflow

Plastic flange Stainless steel loose flange Suitable for accepting customer-side mounted sealing film on the sealing level for point drainage Weight: 0.7 kg

2040.00.02

Height adjustment frame

Drains Plastic

Top section 2500.77.11 Floor drains Easyflow 2505.05.77 2505.00.77 Floor drains ACO Showerboard 620392 620393 620394

Plastic For raising the tile border from 7 to 14 mm Weight: 0.1 kg

620453

10 6,5

Ø131 Ø125

3,5

Height adjustment ring

Plastic top sections 5141.29.00 ­ 5141.32.00 5141.42.00 5141.48.00 620475 ­ 620477

Plastic For height adjustment Per ring by: 6 mm

5141.30.15

21

Ø383 1

Collar for thin-bed fleece

Plastic top sections 5141.27.00 ­ 5141.32.00 5141.42.00 5141.43.00 5141.46.00 5141.48.00

5141.27.19

66

K9/1

Floor drainage

Drains

Plastic

Floor drains Easyflow Drain body DN 50/DN 100

1

67

K9/1

Drains Plastic

1

Complete drains Easyflow Drain body DN 50

Floor drainage

Drains

Plastic

Drain body, Socket inclination: 90°

Product information

ACO product advantages Upgradeable compression sealing flange Optimal cleaning Height adjustable thin bed seal Floor drain DN 50 Plastic Certified in accordance with EN 1253 With reinforcement/connecting rim With removable odour seal Water trap: 50 mm With integrated seal for sealing the annulus between the drain body and top section With plastic top section Frame dimensions: 150 x 150 mm Stainless steel slotted grating Load class: K 3 With protective cover during construction period

Ordering information

Design Height adjustability [mm] Recess [mm] Outflow value [l/s] Weight [kg] Article No.

Without lateral inlet

Standard

15 ­ 96

200 x 200

1,6

0,9

2500.55.77

Drains Plastic

68

Remark: Top sections with slot width 8 mm are suitable for barefoot areas.

K9/1

Infobox

Floor drainage

Drains

Plastic

Complete drains Easyflow Drain body DN 50

1

Drain body, Socket inclination: 1.5°

Product information

ACO product advantages Upgradeable compression sealing flange Optimal cleaning Height adjustable thin bed seal Floor drain DN 50 Plastic Certified in accordance with EN 1253 With reinforcement/connecting rim With removable odour seal Water trap: 50 mm With integrated seal for sealing the annulus between the drain body and top section With plastic top section Frame dimensions: 150 x 150 mm Stainless steel slotted grating Load class: K 3 With protective cover during construction period

Ordering information

Design Height adjustability [mm] Recess [mm] Outflow value [l/s] Weight [kg] Article No.

Without lateral inlet

Standard

15 ­ 96

200 x 260

1,5

0,9

2500.05.77

With lateral inlet DN 50

150

Ø149

Standard

15 ­ 96

200 x 330

1,5

1,1

2500.00.77

102

231

Remark: Top sections with slot width 8 mm are suitable for barefoot areas.

K9/1

69

Infobox

Drains Plastic

1

Complete drains Easyflow Drain body DN 50

Floor drainage

Drains

Plastic

Drain body Flatline, Socket inclination: 1,5°

Product information

ACO product advantages Upgradeable compression sealing flange Optimal cleaning Height adjustable thin bed seal Floor drain DN 50 Plastic With reinforcement/connecting rim With removable odour seal Water trap: 30 mm With integrated seal for sealing the annulus between the drain body and top section With plastic top section Frame dimensions: 100 x 100 mm Stainless steel slotted grating Load class: K 3 With protective cover during construction period

Ordering information

Design Height adjustability [mm] Recess [mm] Outflow value [l/s] Weight [kg] Article No.

Without lateral inlet

100

Ø149

Flatline

82

7 ­ 75

200 x 260

0,8

0,7

2505.05.77

Drains Plastic

194

With lateral inlet DN 50

100

Ø149

82

Flatline

231

7 ­ 75

200 x 330

0,8

0,9

2505.00.77

70

Remark: Top sections with slot width 8 mm are suitable for barefoot areas.

K9/1

Infobox

Floor drainage

Drains

Plastic

Complete drains Easyflow Drain body DN 70/DN 100

1

Drain body, Socket inclination: 90°

Product information

ACO product advantages Upgradeable compression sealing flange Optimal cleaning Height adjustable thin bed seal Floor drain DN 70/DN 100 Plastic Certified in accordance with EN 1253 With reinforcement/connecting rim With removable odour seal Water trap: 50 mm With integrated seal for sealing the annulus between the drain body and top section With plastic top section Frame dimensions: 150 x 150 mm Stainless steel grating Load class: K 3 With protective cover during construction period

Ordering information

Design Height adjustability [mm] Recess [mm] Outflow value [l/s] Weight [kg] Article No.

Without lateral inlet

Standard

15 ­ 96

200 x 200

2,0

0,9

2700.55.77

Remark: Top sections with slot width 8 mm are suitable for barefoot areas.

K9/1

71

Infobox

Drains Plastic

1

Complete drains Easyflow Drain body DN 70/DN 100

Floor drainage

Drains

Plastic

Drain body, Socket inclination: 1.5°

Product information

ACO product advantages Upgradeable compression sealing flange Optimal cleaning Height adjustable thin bed seal Floor drain DN 70/DN 100 Plastic Certified in accordance with EN 1253 With reinforcement/connecting rim With removable odour seal Water trap: 50 mm With integrated seal for sealing the annulus between the drain body and top section With plastic top section Frame dimensions: 150 x 150 mm Stainless steel slotted grating Load class: K 3 With protective cover during construction period

Ordering information

Design Height adjustability [mm] Recess [mm] Outflow value [l/s] Weight [kg] Article No.

Without lateral inlet

Standard

15 ­ 96

200 x 310

1,8

1,0

2700.05.77

Drains Plastic

With lateral inlet

Standard

15 ­ 96

200 x 350

1,8

1,0

2700.00.77

72

Remark: Top sections with slot width 8 mm are suitable for barefoot areas.

K9/1

Infobox

Floor drainage

Drains

Plastic

Complete drains Easyflow Drain body DN 70/DN 100

1

Accessories

Designation

17

compatible with

Extension

All floor drains Easyflow Top sections Socket diameter: 125 mm

Ø125

Description Plastic Suitable for accepting plastic top sections and compressionsealing flanges With lip seal For deepened installation of floor drains Weight: 0.1 kg Plastic flange with infed fleece Suitable for accepting customer-side mounted fluid seals in thin bed procedure Weight: 0.2 kg

Article No.

178

2040.00.00

Thin-bed flange

All top sections Easyflow 2500.77.11 2700.77.11 2700.77.12 Top sections with socket diameter: 125 mm

2040.00.01

Compression sealing flange

All floor drains Easyflow

Plastic flange Stainless steel loose flange Suitable for accepting customer-side mounted sealing film on the sealing level for point drainage Weight: 0.7 kg

2040.00.02

Height adjustment frame

73

K9/1

Drains Plastic

Top section 2500.77.11 Floor drains Easyflow 2505.05.77 2505.00.77 Floor drains ACO Showerboard 620392 620393 620394

Plastic For raising the tile border from 7 to 14 mm Weight: 0.1 kg

620453

1

Cellar drain Drain DN 100

Floor drainage

Drains

Plastic

Drain, Socket inclination: 1,5°

Product information

ACO product advantages Compact dimensions makes it ideally suited for renovation purposes Revolving top section for optimal adaptation to tile pattern With optional extension piece for deepened installation Cellar drain certified in accordance with EN 1253 With removable odour seal Water trap: 60 mm Revolving top section Frame dimensions: 197 x 197 mm ABS rubber slotted grating Load class: K 3 Flow rate: 2.6 l/s

Ordering information

65

1,5

DN100 83

H1

H2

Drains Plastic

197

6

L

L [mm] 255

H1 [mm] 178

H2 [mm] 162

°

95

Recess [mm] 250 x 400

Weight [kg] 1,1

Article No. 2120.00.77

74

K9/1

Floor drainage

Drains

Plastic

Cellar drain Drain DN 100

1

Accessories

Designation

Ø69 Ø58

compatible with Cellar drain Junior with backflow stop Cellar drain DN 100 Sinkamat-K (free-standing installation)

Description

Article No.

Inlet socket DN 50

66

Plastic For lateral inlet Customer-side fitting Weight: 0.1 kg

2410.00.04

Ø65

Plastic extension

Cellar drain DN 100 Cellar drain Junior with backflow stop

For deepened installation Structure height: 130 mm Weight: 0.2 kg

140

2040.00.06

Ø160

75

K9/1

Drains Plastic

Hinweis: @@ Dies ist eine Infobox-VORLAGE Seite xxx. Zubehör AAAAA Zubehör BBBBB Seite xxx.

Infobox

Information

ACO-K9-en_Kap01 - Drains.pdf

24 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

1286839


You might also be interested in

BETA
ACO-K9-en_Kap01 - Drains.pdf
ACO-K9-en_Kap01 - Drains.pdf
untitled