Read BII37604 2008 MDX Running Board.pmd text version

Accessory

Application

Publications No.

INSTALLATION INSTRUCTIONS

PARTS LIST Right running board

RUNNING BOARD P/N 08L33-STX-200A

BII 39906 2009 MDX

Issue Date

JULY 2008

INSTALLATION Client Information: The information in this instruction is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely add equipment to your vehicle. These procedures should not be attempted by "do-it-yourselfers." NOTE: · · Thoroughly clean the bottom of the body between the front and rear wheels. Be careful not to damage the body paint finish. To prevent damage, place a blanket under the running board during the installation. These instructions show the left side running board being installed; the same procedure applies to installing the right running board. On the left side of the vehicle, install one bracket A and two brackets B along the body using 12 long flange bolts. Thread the long flange bolts in about three or four turns. NOTE: If there is undercoat on the body surface, remove the undercoat from the body surface using a scraper or equivalent tool before installing the bracket A. Take care not to damage the paint finish. If necessary, clean the threads using a tap.

Left running board

2 Brackets A

·

1. 4 Brackets B

6 Brackets C

24 Long flange bolts

FRONT

24 Short flange bolts

BRACKET B

36 Flange nuts

12 LONG FLANGE BOLTS

TOOLS AND SUPPLIES REQUIRED Ratchet 10 mm and 13 mm Sockets 10 mm and 13 mm Combination wrenches Blanket Torque wrench

BRACKET A

5N17011T

© 2008 American Honda Motor Co., Inc. - All Rights Reserved.

BII 39906 (0807)

08L33-STX-2A00-91

1 of 2

2.

Remove the two pieces of paper holding the bolts on the bottom of the left running board.

PAPER

4.

Loosely attach the brackets C on the left running board to the bracket A and brackets B on the body with 12 short flange bolts and 12 flange nuts.

12 SHORT FLANGE BOLTS

LEFT RUNNING BOARD 6 BOLTS

5N18010T

12 FLANGE NUTS BRACKET B

FRONT

3.

Install three brackets C on the left running board with the bolts through the holes in the brackets. Install six flange nuts on the bolts.

3 BRACKETS C BRACKET A 6 FLANGE NUTS LEFT RUNNING BOARD

3 BRACKETS C

LEFT RUNNING BOARD 5 mm SIDE SILL TRIM

5N18032T

LEFT RUNNING BOARD

5.

5N18021T

Align the rear of the left running board with the side sill trim as shown, then tighten the 12 short flange bolts. Torque the short flange bolts to 27 N·m (20 lb-ft). Torque the 12 long flange bolts you installed in step 1 to 27 N·m (20 lb-ft). Repeat steps 1 through 6 to install the running board on the right side of the vehicle.

6. 7.

2 of 2

BII 39906 (0807)

© 2008 American Honda Motor Co., Inc. - All Rights Reserved.

Information

BII37604 2008 MDX Running Board.pmd

2 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

568734


You might also be interested in

BETA
AII33599 CR-V side step.backup.backup.backup.backup.fm
300944
AII28623 Running Boards.pmd
Microsoft Word - 2.2_Tech_Spec
untitled