Read Adajio_Watch_Instructions_and_Warranty.pdf text version

Table of Contents

Maintain and care for your new Adajio Watch..........................................................2 Water Resistance............................................................................................................2 Battery Information........................................................................................................2 Operating your New Adajio Watch..............................................................................3 Swiss Quartz Movement.....................................................................................3 Swiss Quartz Calendar Movement.....................................................................3 Swiss Quartz Chronograph Movement.............................................................4 Chronograph Functions.......................................................................................5 Simple Stop Watch Instructions.........................................................................5 Split Time Functions............................................................................................5 Capturing a First and Second Place Time..........................................................5 Realigning Chronograph Hands..........................................................................6 Obtain Service.................................................................................................................7 Limited Warranty............................................................................................................7

Page | 1

Care and Maintenance

Your new Adajio watch combines the best in metal technology and Swiss Quartz movements. To keep your watch running at optimal performance periodic maintenance is required. Maintenance may include complete disassembling, cleaning, reassembling, and lubrication of the movement. It is recommended that your watch gets maintained every 3 ­ 5 years in addition to battery replacement. Opening the watch yourself will void the warranty, it is recommended to have the watch maintained by an authorized Adajio dealer. NOTE: Adajio will assume responsibility for the service rendered at their authorized dealers ONLY.

Water Resistance

Adajio timepieces are water resistance up to 3 ATM. Periodic maintenance is required. The gaskets and crown which seal the case are subject to wear and deterioration under normal use. These parts should be inspected and replaced as needed each time the watch is opened for service. For more information about service scroll down to the Service section of this document. CAUTION: Adajio will not be responsible for any damage caused by or related to water damage or leakage due to improper handling or damage to the case, crown, gaskets or crystal.

Battery Information

Your Adajio watch has a 1.55 volt silver oxide battery. This battery will last approximately 18 to 30 months, depending on the features on your watch. It is important to use only the specific battery recommended for your type of watch. When the battery dies take or send your watch directly to an authorized Adajio dealer. Do not attempt to change the battery yourself as this will void the warranty. If you have questions you can contact us at www.adajiojewelers.com.

Page | 2

Operating Instructions

Figure A

Swiss Quartz Movements

To set the time on your Adajio Swiss Quartz watch: (See Figure A) 1. Pull crown out to position 2. 2. Turn crown in either direction to set hands to correct time. 3. Push crown back in to position 1.

Figure B

Swiss Quartz Calendar Movements

To set the time on your Adajio Swiss Quartz Calendar watch: (See Figure B) Hint: You may need to advance the time 12 hours ahead so you can get the correct AM/PM setting. This makes the date change at midnight instead of noon. Don't worry about the date being wrong you correct it in the next step. 1. For the most accurate time wait until the second hand reaches the 60 second position, pull crown out to position 3. 2. Turn crown to advance the hour and minute hands clockwise to establish AM/PM time on watch. 3. Once AM/PM time is established obtain an accurate time reading. 4. Set minute hand one minute ahead of correct time.

Page | 3

5. When time catches up with your watch push crown back in to position 1. To set the date for your Adajio Swiss Quartz Calendar watch: 1. Pull crown out to position 2. (be gentle) 2. Turn crown clockwise until correct date appears in the window. 3. Push crown back into position 1.

Swiss Quartz Chronograph Movements:

Figure C

A ­ Chronograph Start Button B ­ Chronograph Reset Button C ­ Chronograph Second Timer D ­ Chronograph Minute Timer E ­ Crown

S ­ Second Hand M ­ Minute Hand H ­ Hour Hand F1­ Date Window F2 ­ Date Dial

To set the time on your Adajio Swiss Quartz Chronograph watch: (See figure C) Hint: You may need to advance the time 12 hours ahead so you can get the correct AM/PM setting. This makes the date change at midnight instead of noon. Don't worry about the date being wrong you correct it in the next step. 1. For the most accurate time wait until the small second hand (S) reaches the 60 position, pull crown (E) out to position 3. 2. Turn crown to advance the hour (H) and minute (M) hands clockwise. Once AM/PM time is established set minute hand (M) one minute ahead of time. 3. Once AM/PM time is established obtain an accurate time reading. 4. Set minute hand one minute ahead of correct time. 5. When the accurate time reading catches up with your watch push crown back in to position 1. To change the date: 1. Pull crown (E) out to position 2. (be gentle) 2. Turn crown clockwise until correct date appears in the window. 3. Push crown (E) back in to position 1.

Page | 4

4.

On certain styles you may have to skip step 3. Instead pull crown (E) out to position 3 and then push back to position 1. Contact Adajio if you have questions.

Chronograph Functions: (See Figure C)

The Chronograph has several useful functions. Use buttons A and B to operate the chronograph.

Important: Never push buttons (A) or (B) underwater (never operate watch underwater) as this will let water into the case. Crown (E) must be pushed into position 1. Do not use chronograph while crown (E) is in position 2 or 3.

Simple Stop Watch Instructions: (See Figure C)

1. Press button (A) to start the chronograph. Hand (C) shows the seconds while hand (D) shows the minutes elapsed. 2. Press button (A) a second time to stop the chronograph. 3. Press button (B) while time is stopped to reset hands C and D to zero. NOTE: Adjusting the time while the chronograph is running will not stop the chronograph, but it will stop buttons (A) and (B) from working while the crown (E) is pulled out.

Split Time Functions: (See Figure C)

Your chronograph watch can take intermediate time readings: 1. Press button (A) to start chronograph. 2. Press button (B) to stop the time, but not the chronograph. 3. (don't press button (A) again like the Stop Watch instructions as this will stop the chronograph) 4. Read off the time. 5. Press button (B) to resume time. The second hand (C) will jump ahead and catch up with the ongoing event. 6. Repeat steps 3-5 as needed to take any additional split times. 7. Press button (A) at the end to stop chronograph. 8. Read off the final time. 9. Press button (B) while time is stopped to reset chronograph to zero.

Capturing a First and Second Place Time: (See figure C)

Some models can capture both a winning time and one runner-up: 1. Press button (A) to start timer. 2. Press button (B) as soon as the winner finishes. This will stop the timer, but keep the chronograph running. 3. Press button (A) when the second place finishes. This will record the time of the runner up. 4. Read off the time for the winner. 5. Press button (B) and the hands will advance to the time of the runner-up.

Page | 5

6. Read off the time for the runner up. 7. Press button (B) to reset chronograph.

Realigning chronograph hands:

In the event that the chronograph hands are not aligned at zero here is how to synchronize them. Hint: To advance hands rapidly, press and hold button (A) or (B). To advance the hand slowly press then release button. Watch styles 6063, 7130, 7001 1. Pull Crown (E) out to position 2 2. (Adjust minute counter (D) first because it adjusts the second timer (C) as well.) 3. Press and hold button (B) to advance minute timer (D). 4. Let go so the minute timer (D) stops before the 30 spot. 5. Press and release button (B) continually until hand hits 30 spot. 6. Press and hold button (A) to advance second timer (C). 7. Let go so the second timer (C) stops before the 60 spot. 8. Press and release button (A) continually until hand hits 60 spot. Watch styles 5012, 7003, 4001 1. Make sure crown (E) is pushed all the way in. 2. Press buttons (A) and (B) together and release. 3. (Adjust minute counter (D) first because it adjusts the second counter (C) as well.) 4. Press and hold button (B) to advance minute counter (D) 5. Let go so the minute timer (D) stops before the 30 spot. 6. Press and release (B) until hand hits 30 spot. 7. Press and hold button (A) to advance second counter (C) 8. Let go so the second timer (C) stops before 60 spot. 9. Press and release (A) until hand hits 60 spot. 10. Press buttons (A) and (B) together and release. Hands will make a full rotation and are reset.

Page | 6

OBTAINING SERVICE

To service your Adajio timepiece send it directly to: Repair Department 11075 S. State Street Ste. 31A Sandy, UT 84070 Phone: (801) 562-0202 Fax: (801) 562-0992 Email: [email protected] NOTE: We recommend you ship through a traceable and insured carrier Or take it to an authorized dealer In most cases the service rendered is covered under the Adajio Warranty. You will be required to present a valid warranty card with each submission. To be valid, the warranty card must be properly filled out at www.adajiojewelers.com/register.php Warranty must be filled out no later than 30 days after purchase. Include in the package a detailed note explaining exactly what is wrong with the watch, warranty card, and contact information. Please include your payment information, return address and your phone number so if we have questions we can contact you. Most repairs are covered under warranty, but Adajio DOES NOT cover shipping costs.

LIMITED WARRANTY INFORMATION

Congratulations on your purchase of an Adajio watch. We are committed to providing a product that will truly pass the test of time. Adajio timepieces are made from genuine Tungsten Carbide or Black Diamond Ceramic. Tungsten Carbide and Black Diamond Ceramic are some of the hardest metals, rating a 9 on Mohs' hardness scale. Only a few things in this world (including diamonds, a perfect 10 on Mohs' scale) can scratch this brilliant piece of jewelry, providing an exquisite and permanently polished piece. Only genuine diamonds are used on Adajio timepieces. Your watch also boasts a sapphire crystal and a Swiss quartz movement. Under normal use, there will be little to no wear on the polished finish of the Tungsten Carbide or Black Diamond Ceramic. Should you find any defect or malfunction under normal wear, Adajio provides a 2-year warranty on the movement and a lifetime guarantee on the polished finish of the metal. This warranty does not cover wear on crystals or chipped links. Adajio watches are not indestructible. Therefore, Adajio will void the warranty if a watch is altered in any way, including engraving, drill, stone setting, polishing, boiling, cleaning with harsh chemicals, soldering, burning or showing evidence of obvious repeated physical abuse. Should you discover any defect or malfunction we will gladly repair your watch providing you filled out the form found at www.adajiojewelers.com/register.php

Page | 7

Information

7 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

547990


You might also be interested in

BETA
U60*
H57*
UNLISTED DIGITAL II