Read CAI_BGA_4 page.indd text version

BGA TECHNOLOGIES INC.

2007 1999

NAKAMURA-TOME WT-150, CNC opposed 2 spindle turning center

9 AXIS 2 AVAILABLE

HARDINGE CONQUEST ST220-B, swiss type CNC lathe

C-AXIS, LIVE TOOLING 2 AVAILABLE

2003

2 AVAILABLE

2008

NTC N4Q, CNC horizontal machining center

EVERISING H-360HA, automatic horizontal band saw

DATE

TIME

LOCATION

5 Kenhar Drive, North York (Toronto), ON M9L 1M9

Wednesday, April 22, 2009

10:30 A.M.

2007

2003

9 AXIS

NAKAMURA-TOME WT-150, CNC opposed 2 spindle turning center NTC N4Q, CNC horizontal machining center

2 AVAILABLE

2007

9 AXIS

NAKAMURA-TOME WT-150, CNC opposed 2 spindle turning center

2 AVAILABLE

LNS QUICK LOAD SERVO S3, bar feed

2007

CNC TURNING CENTERS

NAKAMURA-TOME 2007, WT-150, 9-axis CNC opposed 2 spindle turning center with FANUC 18i-TB CNC control, 7.486" max. turning dia., 29.55" max. dist. between spindles, 15.76" max. turning length, 2" bar cap., travels: X1 / X2 - 6.2 / 6.6", Z1 & Z2 - 18.32", Y (upper turret) - 2.758", speeds to (L/R) 5000/6000 RPM, 20/15 HP LH spindle motor, 15/10 HP RH spindle motor, (48) tool positions on (2) double sided 12 station turrets, collet chuck (LH), 3 jaw chuck (RH), coolant, chip conveyor, s/n M156906 NAKAMURA-TOME 2007, WT-150, 9-axis CNC opposed 2 spindle turning center with FANUC 18i-TB CNC control, 7.486" max. turning dia., 29.55" max. dist. between spindles, 15.76" max. turning length, 2" bar cap., travels: X1 / X2 - 6.2 / 6.6", Z1 & Z2 - 18.32", Y (upper turret) - 2.758", speeds to (L/R) 5000/6000 RPM, 20/15 HP LH spindle motor, 15/10 HP RH spindle motor, (48) tool positions on (2) double sided 12 station turrets, collet chuck (LH), 3 jaw chuck (RH), coolant, chip conveyor, s/n M156602 DAEWOO 2001, PUMA 300LC, CNC turning center with FANUC 21i-T CNC control, 23" max. swing, 15.7" max. turning dia., 50.4" max. turning length, 4" bar cap., travels; X-11.3", Z-51.5", speeds to 2800 RPM, 35 HP spindle motor, 10 station turret, 12" chuck, coolant, chip conveyor, s/n P25L1068 GOODWAY 2001, GCL-2L, CNC turning center with FANUC OT CNC control, 8.66" max. turning dia., 23.6" max. View of NAKAMURA-TOME turning length, 3" bar cap., travels; X-5.3", Z-25.2", speeds to 4500 RPM, 20/15 HP spindle motor, 8 station turret, 8.5" WT-150, spindle assemblies and tool turrets chuck, coolant, chip conveyor, s/n 781665 HARDINGE 1995, CONQUEST 42SP, super precision CNC lathe with FANUC 18T CNC control, 21.20" swing over upper way cover, 8.25" max. turning dia., 14" max. turning length, 1.62" spindle hole, 10 HP spindle motor, 12-position turret, high-pressure coolant, programmable tailstock, s/n SGP000740 AMERI SEIKI 1994, TC-2L, CNC turning center with FANUC 0T CNC control, 15.75" swing, 8.66" max. turning dia., 21" max. turning length, 2" bar cap., speeds to 6000 RPM, 20 HP spindle motor, 8 station turret, 8" chuck, coolant, chip conveyor, s/n 78591

1999

HARDINGE CONQUEST ST220-B, swiss type CNC lathe HARDINGE CONQUEST 42SP, super precision CNC lathe

2001

DAEWOO PUMA 300LC, CNC turning center GOODWAY GCL-2L, CNC turning center

2001

CNC SWISS-TYPE TURNING CENTERS

HARDINGE 1999, CONQUEST ST220-B, swiss type CNC lathe with GE FANUC 18-T CNC control, sub-spindle, .75" max. bar dia., 10.35" max. turning length (one chucking), C-axis, live tooling, 5-deg. spindle indexing, speeds to 6300 RPM, 5 HP main spindle, 3 HP sub spindle, coolant, chip conveyor, s/n SN-211-20; HARDINGE 1999, CONQUEST ST220-B, swiss type CNC lathe with GE FANUC 18-T CNC control, sub-spindle, .75" max. bar dia., 10.35" max. turning length (one chucking), C-axis, live tooling, 5-deg. spindle indexing, speeds to 8000 RPM, 5 HP main spindle, 3 HP sub spindle, coolant, chip conveyor, s/n SN-132-20

CNC HORIZONTAL MACHINING CENTERS

NTC 2003 N4Q CNC horizontal machining center with FANUC 18i-MB CNC control, (2) 19.68" x 19.68" pallets, travels, X-25", Y-19.68", Z-19.68", #40 taper, 32 ATC, speeds to 12,000 RPM, 25 HP spindle motor, thru spindle coolant, chip conveyor, s/n M459002 NTC 2003 N4Q CNC horizontal machining center with FANUC 18i-MB CNC control, (2) 19.68" x 19.68" pallets, travels, X-25", Y-19.68", Z-19.68", #40 taper, 32 ATC, speeds to 12,000 RPM, 25 HP spindle motor, thru spindle coolant, chip conveyor, LNS HYDROBAR EXPRESS, bar feed s/n M459004

2001

1999

2 AVAILABLE

TAKUMI V8A, CNC vertical machining center TAKUMI V11A, CNC vertical machining center SUPERMAX V65-MA, CNC vertical machining center

2008

MITUTOYO CRYSTA-PLUS M443, coordinate measuring machine

2008

(2) KAESER AS20T SCB, 20 HP rotary air compressor AMARA SEIKI TC-2L, CNC turning center (2) ATLAS COPCO GA22FF, View of tool holders 30 HP air compressor

CNC VERTICAL MACHINING CENTERS

TAKUMI 1998, V8A, CNC vertical machining center with MITSUBISHI CNC control, 20" x 39" table, travels; X-31.9", Y-20.1", Z-22.1", 5.9"-28" spindle nose to table, 1320 lbs. max. workpiece weight, speeds to 8000 RPM, #40 taper, 24 ATC, 15 HP spindle motor, coolant s/n F8325; TAKUMI 1997, V11A, CNC vertical machining center with MITSUBISHI CNC control, 25" x 53" table, travels; X-43", Y-22", Z-22.1", 5.9"-31" spindle nose to table, 1760 lbs. max. workpiece weight, speeds to 8000 RPM, #40 taper, 24 ATC, 15 HP spindle motor, coolant s/n G0502; TAKUMI 1997, V8A, CNC vertical machining center with MITSUBISHI CNC control, 20" x 39" table, travels; X-31.9", Y-20.1", Z-22.1", 5.9"-28" spindle nose to table, 1320 lbs. max. workpiece weight, speeds to 8000 RPM, #40 taper, 24 ATC, 15 HP spindle motor, coolant s/n s/n 1350441; DAH LIH 1994, MCV, 1500 CNC vertical machining center with FANUC OM CNC control, 26.8" x 67" table, travels; X-59", Y-25", Z-27.6", 7.8"35.4" spindle nose to table, 3300 lbs. max. workpiece weight, speeds to 3500 RPM, #50 taper, 24 ATC, 20/15 HP spindle motor, coolant s/n 1350441; SUPERMAX 1999, V65-MA, CNC vertical machining center with FANUC 20FA CNC control, 16.5" x 33" table, travels; X-25.6", Y-16", Z-20", 770 lbs. max workpiece weight, speeds to 6000 RPM, CAT 40 taper, 20 ATC, 10HP spindle motor, coolant, s/n 807010; TOSHIBA VMC-45, CNC vertical machining center with TOSNUC 600M CNC control, 17.7" x 39.4" table, travels; X-28", Y-17.7", Z-19.7", 1760 lbs. max workpiece weight, speeds to 6000 RPM, CAT 40 taper, 20 ATC, 10HP spindle motor, coolant, s/n 807010

INSPECTION EQUIPMENT

LNS 2007, QUICK LOAD SERVO S3, bar feed with .25"-4.75" bar cap., 4"-63" length, side load rack, s/n 303578; LNS 2007, QUICK LOAD SERVO S3, bar feed with .25"-4.75" bar cap., 4"-63" length, side load rack, s/n 303486; LNS 2001, HYDROBAR EXPRESS 32652, bar feed with touch screen control, s/n 130162; LNS 2000, HYDROBAR EXPRESS 226, bar feed with touch screen control, s/n 100492

TOSHIBA VMC-45, CNC vertical machining center

BAR FEEDS

MITUTOYO 2007, CRYSTA-PLUS M443, coordinate measuring machine with 32.5" X 24.6" granite table, travels; X-15.76", Y-15.76", Z-11.82", 18.9" under rail, probe, PC s/n 25850121; BROWN & SHARPE MICROVAL coordinate measuring machine with PC, s/n 0296-1081; assorted inspection equipment including MICRO-VU microscope, LEICA microscope, height gauge, micrometers surface plates, gages, cabinets & related support equipment

MISCELLANEOUS

ATLAS COPCO 2000, GA22, 30 HP air compressor, s/n AII-254572; ATLAS COPCO 2000, GA22, 30 HP air compressor, s/n AII-258024; PSG A141 toolroom lathe, 15" swing, 55" bed, 1½" spindle bore s/n 3580;

MICHAELLIN 1994, #12, tool grinder, s/n 100628; CRAFTEX B1108N, horizontal band saw, 7" x 12" cutting capacity, s/n 06119073; CRAFTEX CT010, stroke sander with 8" disc & 6" belt , 2 hp dust collector, s/n 306920 ALSO: tool carts, tables, fans, drills, cabinets, chairs, lights, surface plates, machine vices, height gauges, pallet truck, strapping cart, arbor press, vacuum, computer terminals, racking, cages & related support equipment, desks, chairs, tables, filing cabinets, computers, printers, photocopiers, faxes, phone system, etc.

ONSITE

IMPERIAL BED FRAME LTD. Large Manufacturer of Bed Frames Featuring Fabricating Equipment Mississauga, Ontario, Canada Tuesday, April 7 10:30 A.M. EST COURT VALVE COMPANY INC. Manufacturer of High Precision Screw Machine Parts & Power Transmission Components Beamsville, Ontario, Canada Tuesday, April 21 · 10:30 A.M. EST NATIONAL COPPER PRODUCTS INC. Fully Integrated Copper Tube Manufacturing Plant Dowagiac, Michigan, USA Wednesday, May 13 10:30 A.M. EST RRSI CNC Machining & Machine Building Facility Alliston, Ontario, Canada Wednesday, May 20 10:30 A.M. EST

MEMBER IN GOOD STANDING

Printed in Canada. ©2008 CORPORATE ASSETS INC. ALL RIGHTS RESERVED.

AUCTION DETAILS

INSPECTION Tuesday, April 21, 2009 from 9:00 A.M. to 5:00 P.M. and morning of auction day. REMOVAL Small items by Thursday, April 23, 2009 by 5:00 P.M. Remaining items by Friday, May 8, 2009 by 5:00 P.M. DIRECTIONS Visit our website at www.corpassets.com, click on Upcoming Auctions: BGA Technologies Inc. details button, click on Map tab and get directions by accessing the pop up address info box. ACCOMMODATIONS & CAR RENTALS Please visit our website for details at www.corpassets.com PAYMENT Please visit our website for details at www.corpassets.com A Buyer's Premium will apply at this sale. We Accept

Visit our website for specific terms and conditions.

TERMS Corporate Assets Inc. assumes no liability for errors or omissions in this brochure. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

APPRAISAL SERVICES

What's the real value of your equipment? If you require a detailed appraisal for banking, insurance, or internal purposes, consult with the certified experts at Corporate Assets Inc. We provide appraisal services anywhere in the world for all types of industrial manufacturing and processing equipment.

· We will appraise one machine or

your complete plant

· Going Concern, Fair Market or

Liquidation Values Call us in complete confidence today with your requirements. Phone: (416) 962-9600 Fax: (416) 962-9601 Email: [email protected]

AUCTION CONDUCTED BY CORPORATE ASSETS INC.

For further information contact us at: 2 St. Clair Ave., W., Suite 1002 Toronto, Ontario, Canada M4V 1L5 Tel: (416) 962-9600 · Fax: (416) 962-9601 Email: [email protected] Web: www.corpassets.com

Toronto · Montreal · Chicago

Information

CAI_BGA_4 page.indd

5 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

614793


You might also be interested in

BETA
Protech2pager
CUPPLES' J&J COMPANY EQUIPMENT LIST - 03/10/2008
Microsoft Word - Yang MS.doc