Read AG_HS%20Round%20Balers_Brochure.pdf text version

5000 SERIES

ROUND BALERS

We've Partnered

The BesT Of BOTh WOrlds

Hesston may not have invented the round baler, but since 1974, Hesston engineers have taken round baler performance to new heights with industryleading quality and patented innovations like the open-throat design and chamber stuffer fingers. The Hesston reputation for performance has become even stronger and more widespread since Hesston became part of the AGCO Corporation family in 1991. Now, two respected names have come together under the AGCO Hesston banner with a single goal. That's to provide customers with the most innovative and advanced hay equipment backed by dedicated customer support network from AGCO.

5000 SERIES ROUND BALERS

Introducing the 5000 Series Round Balers

Model Bale Width ­ in. (mm) Bale Diameter ­ in. (mm) Bale Weight ­ lbs. (kg) Min. PTO hp (kW) Pickup Width ­ in. (mm)

5134 39 (991) 52 (1321) 550 (250) 30 (22) 33.8 (858)

5145 46.5 (1182) 62 (1575) 1,250 (567) 40 (29.8) 44.17 (1122)

5146 46.5 (1182) 72 (1829) 1500 (680) 55 (41) 44.17 (1122)

5156 61.5 (1562) 72 (1829) 2100 (953) 70 (52.2) 59.8 (1518)

5545 46.5 (1182) 60 (1524) 1,142 (518) 55 (41) 60 (1518)

5546 46.5 (1182) 72 (1829) 1,644 (746) 65 (48) 60 (1518)

5556 61.5 (1562) 72 (1829) 2,200 (998) 70 (52) 75.3 (1914)

5546A 46.5 (1182) 72 (1829) 1,750 (794) 65 (48) 60 (1518)

5556A 61.5 (1562) 72 (1829) 2,200 (998) 70 (52) 75.3 (1914)

3

State-OF-tHe-art

feATUres ThrOUGhOUT

DIREct, OpEN-thROAt FEEDINg

The open-throat design feeds the crop directly into a vertical bale chamber without restriction. Benefits include positive bale starts without plugging; less concern about bunched crop, dead spots or stripped leaves and more uniform tension, from the core to the outer layer. As the bale grows in diameter, it exerts force on the bale density and belt tension system, which applies return resistance that remains consistent from the bale core to the outer shell. The result is a tight, dense bale with minimal horsepower requirements.

5000 SERIES ROUND BALERS WINDROWERS · 9300 Series

From the rugged, narrow tongue and constant velocity driveshaft to the double rollers on the 5500 Series tailgates, AGCO Hesston round balers are built for rugged dependability, reliable bale starts and maximum productivity.

cENtRAL DRIvE SyStEm

wIDE, LOw-pROFILE pIckUp

More leaves go into every bale, thanks to a lowprofile pickup on all AGCO Hesston 5000 Series balers. Due to the small diameter and short lift height, delicate hay moves into the bale chamber with minimal disruption or abrupt direction change. The Models 5134 and 5145 feature 41.5- and 44.2-inch pickups respectively, which can be extended even wider with the use of optional gathering wheels. The larger 5146 and 5156 have 44.2 and 59.8-inch pickups respectively and can also use gathering wheels when needed. The 5500A and 5500 Series, on the other hand, use a set of innovative centering augers to extend the effective width of the pickup up to 83 inches for gathering in large-volume or double windrows. The Models 5556 and 5556A also feature dual cam tracks and center bulkheads to extend service life and prevent tine bar twisting in heavy crop conditions. A set of stuffer fingers, unique to the AGCO Hesston 5500A/5500 Series balers, smoothly moves crop material from the pickup into the open-throat bale chamber, allowing quicker bale starts and improved performance in varying crop conditions.

The majority of the drive system on all models is located on the left side of the baler for quicker maintenance and longer service life. The drive for the pickup and stuffer on all 5500A and 5500 Series balers also features a radial pin slip clutch for added drive protection. All 5000 Series balers feature a crowned rubber top drive roller that centers the forming belts and provides a positive drive surface that results in longer belt life and less maintenance.

FEwER StOpS AND FAStER tIES

An easy-access twine box, located on the right side of the baler (except the Model 5134, which holds two twine balls between the A-frame tongue) holds up to eight balls of twine (four on the Models 5145, 5146 & 5156) for fewer stops. Every AGCO Hesston round baler features a dual twine tie system for faster bale tying.

A FIRm gRIp ON pRODUctIvIty

Innovative stuffer assembly

Bale forming belts on all models except the Model 5134 provide 90 percent bale coverage for trouble-free service and minimal leaf loss. While the Model 5134 features a mini-rough tread surface, all other models use a Wedgegrip belt with three-ply construction. Meanwhile, belts are fastened with Alligator® rivet-style lacings that deliver a long-lasting, dependable splice and ease of maintenance.

Central drive system Fewer stops for twine

A firm grip on productivity

Wide, low-profile pickup

5 5

In a CLaSS

Of TheIr OWN

hIgh vALUE wIthOUt A hIgh pRIcE

The AGCO Hesston 5100 Series balers are designed for operators who need an easy to handle bale package at an affordable price.

cONvENIENt BALE SIzE

The Model 5134 is the only baler of its type in the industry that produces a 3' x 4' round bale. As a result, the Model 5134 can operate on as little as 30 PTO horsepower. The low bale weight and narrow width provide convenient handling, transportation and feeding.

RELIABLE SpRINg tENSION

Designed for operators who need a larger sized bale at an affordable price, Models 5145, 5146 and 5156 balers offer easy serviceability, low maintenance and popular 4X5, 4x6 and 5x6 bale sizes respectively. Despite its economical price, it is equipped with a myriad of productivity features, including staggered belts that reduce crop accumulation; an electric twine wrap system; slip clutch protection on the driveline and the option of an automatic tie system.

AUtO-tIE OptION

The Model 5134 features a dualarm spring-tension system that applies pressure to the belts with the top tensioner while the bottom tensioner creates the hard bale core. Separating the two functions provides a more consistent bale, despite the small bale size.

gENtLE, yEt pOSItIvE BALE gRIp

Five forming belts measuring 4.8" each provide excellent gripping properties for quick bales starts and solid core formation... thanks in part to their "mini-rough" surface.

The Model 5145 can be equipped with a factory-installed automatic tie option that includes both an automatic and semi-automatic mode. The control box, which is included in the package, permits manual tying and electronic control of the number of twine wraps. The new 5146 and 5156 are standard with an AutoTie controller. The 5146 and 5156 can also be ordered with mesh wrap from the factory or as a field installed kit.

5000 SERIES ROUND BALERS

DUAL tENSION SyStEm

Models 5145, 5146 and 5156 use a single arm belt tension/ density control system. A spring controls initial belt tension and is in control as the bale is started. As the bale starts to grow, a hydraulic density control system takes over, controlling the amount of density applied to the bale from core to finished bale.

ExpEct mORE AND gEt It

In the semi-automatic mode, the operator is alerted when the bale reaches the pre-selected size; but the operator must press the cycle start switch to begin the tying/wrapping process.

ISOBUS cOmpLIANt mONItORINg

The Models 5545, 5546 and 5556 are designed to build 4' X 5', 4' X 6' and 5' X 6' bales respectively. These three models boast features that set them apart from other balers in this popular size range. Functional amenities include an extra-wide pickup with centering augers and stuffer fingers to maintain productivity; a bale-shape monitor that measures actual bale growth for better responsiveness, and an electrically-actuated auto-tie system that can be operated in both automatic and semi-automatic modes. Mesh wrap can be installed as a factory or field option on all three models for faster bale wrapping and better water-shedding ability.

AUtO OR SEmI-AUtO

All AGCO Hesston 5500 Series balers use the innovative AGCO Advanced Technology Solutions Console I for monitoring and controlling all baler functions and settings. However, because the balers are ISOBUS or ISO11783 compliant, 5500 Series models can also be used with any ISO VT terminal equipped tractor without the need to purchase a separate monitor. The Console I uses an icon-based color screen that is easily navigated by a rotary dial in combination with a set of soft keys to access all menus and settings.

A B c D E

A. Bale shape/bale size icons: Bale shape indicators; set bale size; auto start on/off, twine or mesh wrapping. B. Rotary control knob C. Soft keys and functions: Manual cycle start; wrap menu; baler settings menu; manual mode; service menu; bale counts menu. D. Bale counters: Four separate bale counters, plus one lifetime bale count allows operators to keep track of multiple bale counts. E. Drive/Stop Icon: Indicated by green arrow or red stop sign.

Take control of the full wrapping process on the 5500 Series. In automatic mode, the baler will automatically alert the operator and begin tying or wrapping the bale as soon as the bale size has reached the preset bale size. The operator must then cycle the tailgate via the tractor hydraulic remote valve.

7

truLy

AUTOmATIc BAlING

AGCO Hesston Models 5546A and 5556A Auto-CycleTM balers feature automatic baling in every sense of the word. To build solid, tightly wrapped bales with an AGCO Hesston Auto-CycleTM model, simply follow the driving lights on the control monitor, stop when instructed to do so and push a button on the control console or on the optional remote start switch. The baler automatically wraps the bale with twine or mesh, de-clutches the baler, opens the tailgate, ejects the bale, closes the tailgate and re-engages the pickup. At that point, the monitor signals you to start a new bale. You can even choose the amount of automatic control you prefer. Set the baler to run the entire cycle at the push of a button (Auto Kick), or set it to wrap the bale automatically when

the preset bale diameter has been reached (Auto Wrap). A self-contained hydraulic system, which includes a pump, reservoir, oil filter and control valves, combined with state-of-the-art electronics, lets you concentrate on the field instead of the controls.

FULL-FUNctION cONtROL mONItOR

pRODUctIvIty IS StANDARD · Extra-wide pickup assembly · Hydraulic pickup lift · Self-contained hydraulic system · Automatic bale ejector · Auto wrap and eject with one button

The new-generation monitor used on the 5546A and 5556A models allows the operator to observe every function of the baler, including bale diameter, bale count, twine arm position, bale ejection and tailgate position. The operator can also select bale size, twine spacing, twine end wrap position and net wrap options, as well as raise or lower the pickup -- all without leaving the tractor seat. You can even select four different languages on the readout.

5000 SERIES ROUND BALERS

Silage balers feature open throat and scraper on starting roll

pUt thE wRAp ON FEED QUALIty

Wrap bales faster than ever, while retaining more leaves and fine stems, with the optional mesh wrap system that is available on 5500A and 5500 Series only. Mesh-wrapped bales shed water easier so hay lasts longer and stays more palatable. Best of all, the AGCO Hesston system can handle both standard width mesh wrap and wider mesh rolls (6 inches wider than the bale chamber) for edge-to-edge wrapping that helps hold the corners of the bale. When used with an Auto-CycleTM model, you can even switch from twine to net wrap and back with the push of a button on the control box.

SILAgE mODELS ADD DIvERSIty

The benefits of round bale silage go well beyond the lower investment, compared to upright and pit silos. An AGCO Hesston silage special can also help you retain a higher percentage of protein and TDN for feed value, while reducing the weather dependence and worry associated with hay making. As an added benefit, silage bales can often be stored close to feeding areas and fed in a variety of ways. Each silage model 5545, 5546, and 5546A, features special scrapers and components to reduce crop buildup when baling damp, gummy material. On the other hand, AGCO Hesston silage balers are equally at home in dry hay. Simply pull into the field and start rolling up solid, dry bales that stack and haul with ease.

TThe AGCO Hesston mesh wrap system is known for its simplicity. Upon actuation, the unit pivots forward until the mesh feed rolls contact the forming belts and start the wrapping process. The rolls move away as soon as the rotating bale starts pulling mesh from the mesh wrap unit.

An electronic sensor, which determines when the pre-set number of mesh wraps has been applied, automatically ends the wrapping process and cuts the mesh. Unlike some systems, the AGCO Hesston sensor also measures true revolutions, regardless of tractor rpms or PTO speed.

9

OutFIt eaCH MOdeL

TO YOUr sPecIfIc Needs

While every AGCO Hesston baler includes features that are unavailable or optional on competitive balers, AGCO Hesston offers a variety of options to customize each model to the customers' needs.

SILAgE kIt

wheels increase the effective width of the pickup and help build dense, squareshouldered bales by feeding more crop to the edges of the bale chamber.

FIRE ExtINgUIShER

Reap the benefits of round bale silage with any 5500A or 5500 Series round baler with an optional silage kit. The kit contains all the rolls, scrapers and knives that are necessary to keep material from building up in the bale chamber.

hyDRAULIc pIckUp LIFt

Due to the flammable nature of hay, a fire extinguisher, such as the AGCO Hesston 2.5-gallon, water-filled model, is a recommended option on every baler to protect the owner's investment in machinery and crops.

BALE RAmpS

Raise and lower the pickup from the tractor seat with the optional hydraulic pickup lift. Benefits include increased productivity as well as less chance of pickup damage in rough fields. Optional on 5500 Series round balers and standard on 5500A Series balers.

wINDROw gAthERINg whEELS

An optional bale ramp, available for the 5134, 5145, 5146 and 5156 allows the operator to wrap and eject the bale without having to back up. The weight of the bale automatically forces the ramp down and the bale simply rolls away as it is ejected. The 5146 and 5156 can also be fitted with an optional hydraulic kicker either from the factory or as a field-installed kit.

Available as an option on the 5134, 5145, 5146 and the 5156, the windrow gathering

5000 SERIES ROUND BALERS

MODELS

5134

5145

5146

5156

5545

5546

5556

5546A AutO-CyCLE

5556A AutO-CyCLE

Bale Size Diameter - min. in (mm) 30 (762) Diameter - max. in (mm) 52 (1,321) Width in (mm) 39 (991) Weight ­ Dry ­ lb (kg) 550 (249) Weight ­ Max. Silage ­ lb (kg) N.A. Dimensions & Weights Overall Width in (mm) 74.5 (1,892) Overall Length in (mm) 132 (3,353) Overall Height in (mm) 84 (2,134) Weight lb (kg) 2780 (1,261) Tongue Weight lb (kg) 500 (227) Tire Size 7.60 x 15 Optional Tires N.A. Bale Chamber Number of Belts

Belt Width in (mm) Bale Size Indicator Bale Shape Indicator Oversize Bale Protection 5 Laced, MiniGrip Pattern 4.8 (122) Visual Gauge N.A. Audible Warning 33.8 (858) 38.0 (965) 38.8 (986) 3 42 Rod Manually - Rope Actuated Twine 2

30 (762) 62 (1575) 46.5 (1,182) 1250 (567) N.A. 92.5 (2,350) 147 (3,734) 101 (2,565) 3720 (1,687) 440 (200) 11L x 15 N.A. 6 Laced, WedgeGrip Pattern 7.0 (178) Visual Gauge N.A. N.A. 44.17 (1,122) 55.8 (1,417) 65 (1,651) 4 72 Adjustable Rod Electric Actuated (Auto-Tie Opt) 4 N.A. 40 (30) 4,000 (1,814) 540 One Double Acting Fire Extinguisher Gathering Wheels Bale Ramp Starting Roll Scraper Remote Cycle Start (Auto-Tie) Bale Counter

30 (762) 72 (1829) 46.5 (1,182) 1500 (680) N.A. 100 (2550) 162 (4115) 118 (3000) 5100 (2313) 1120 (508) 31 x 13.5 - 15 14L - 16.1 6 Laced, WedgeGrip Pattern 7.0 (178) Visual Gauge 3 Driving Lights Audible Warning 44.17 (1122) 46.8 (1188) 57 (1448) 4 72 Adjustable Rod Auto, Electric Actuated 4 Factory/Field Opt 55 (41) 6000 (2722) 540 (1000 w/ Conversion) One Double Acting Fire Extinguisher Gathering Wheels Bale Kicker Bale Ramp Mesh Wrap

30 (762) 72 (1829) 61.5 (1562) 2100 (953) N.A. 112 (2845) 162 (4115) 118 (3000) 5380 (2440) 1250 (569) 31 x 13.5 - 15 14L - 16.1 8 Laced, WedgeGrip Pattern 7.0 (178) Visual Gauge 3 Driving Lights Audible Warning 59.8 (1518) 61.8 (1568) 72 (1830) 4 72 Adjustable Rod Auto, Electric Actuated 4 Factory/Field Opt 70 (52.2) 7000 (3175 540 (1000 w/ Conversion) One Double Acting Fire Extinguisher Gathering Wheels Bale Kicker Bale Ramp Mesh Wrap

30 (762) 60 (1524) 46.5 (1,182) 1140 (518) 2000 (907) 102.5 (2,604) 149 (3,768) 103 (2,616) 5720 (2,595) 1100 (580) 31 x 13.5-15 N.A. 6 Laced, WedgeGrip Pattern 7.0 (177) Monitor & Visual On-baler 3 Colored Bars on Monitor Audible & Visible Indication 60 (1,518) 66 (1,680) 78 (1,981) 4 (2 per Row) 96 Adjustable Rod Auto, Electric Actuated Up to 8 Factory or Field Opt 55 (41) 6,000 (2,722) 540 (1000 w/ Conversion) One Double Acting Fire Extinguisher Short Crop Kit Hydraulic Bale Ejector Hydraulic Pickup Lift Silage Kit (Non-Silage Balers) Mesh Wrap

30 (813) 72 (1829) 46.5 (1,82) 1644 (746) 2200 (998) 102.5 (2,604) 149 (3,768) 115 (2,921) 6120 (2,776) 1150 (571) 14L x 16.1 N.A. 6 Laced, WedgeGrip Pattern 7.0 (177) Monitor & Visual On-baler 3 Colored Bars on Monitor Audible & Visible Indication 60 (1,518) 66 (1,680) 78 (1,972) 4 (2 per Row) 96 Adjustable Rod Auto, Electric Actuated Up to 8 Factory/Field Opt 65 (49) 6,500 (2,948) 540 (1000 w/ Conversion) One Double Acting Fire Extinguisher Short Crop Kit Hydraulic Bale Ejector Hydraulic Pickup Lift Silage Kit (Non-Silage Balers) Mesh Wrap

30 (762) 72 (1829) 61.5 (1,562) 2200 (998) 2400 (1,089) 117.5 (2,985) 155 (3,937) 115 (2,921) 6750 (3,057) 1340 (617) 14L x 16.1 N.A. 8 Laced, WedgeGrip Pattern 7.0 (177) Monitor & Visual On-baler 3 Colored Bars on Monitor Audible & Visible Indication 75.3 (1,914) 83.6 (2,123) 92 (2,337) 4 (2 per Row) 120 Adjustable Rod Auto, Electric Actuated Up to 8 Factory/Field Opt 70 (52) 7,000 (3,175) 540 or 1000 One Double Acting Fire Extinguisher Short Crop Kit Hydraulic Bale Ejector Hydraulic Pickup Lift Silage Kit Mesh Wrap

30 (813) 72 (1829) 46.5 (1,182) 1644 (746) 2200 (998) 102.5 (2,604) 149 (3,768) 115 (2,921) 6120 (2,776) 1150 (571) 14L x 16.1 N.A. 6 Laced, WedgeGrip Pattern 7.0 (177) Monitor & Visual On-baler Arrows on Monitor Declutches Baler 60 (1,518) 66 (1,680) 78 (1,972) 4 (2 per Row) 96 Adjustable Rod Auto, Hydraulic Actuated Up to 8 Factory Opt 65 (49) 6,500 (2,948) 540 (1000 w/ Conversion) None Required Fire Extinguisher Short Crop Kit Silage Kit (Non-Silage Balers)

32 (813) 72 (1829) 61.5 (1,562) 2200 (998) 2400 (1,089) 117.5 (2,985) 155 (3,937) 115 (2,921) 6800 (3,085) 1560 (708) 14L x 16.1 N.A. 8 Laced, WedgeGrip Pattern 7.0 (177) Monitor & Visual On-baler Arrows on Monitor Declutches Baler 75.3 (1,914) 83.6 (2,123) 92 (2,337) 4 (2 per Row) 120 Adjustable Rod Auto, Hydraulic Actuated Up to 8 Factory Opt 70 (52) 7000 (3,175) 540 or 1000 None Required Fire Extinguisher Short Crop Kit Silage Kit

Pickup Width ­ Tine to Tine ­ in (mm) Width ­ Inside, Panel to Panel ­ in (mm) Width ­ Outside End to End ­ in (mm) Tine Bars Number of Tines Windguard Bale Wrapping Twine Wrapping

Number of Twine Balls ­ Depending on Size Mesh Wrap

N.A. tractor Requirements Horsepower ­ Min ­ hp (kW) 30 (22) Tractor Weight ­ Min ­ 3,000 (1,361) lbs (kgs) PTO Speed (rpm) 540 Hydraulic Remote Valves Optional Kits One Double Acting Fire Extinguisher Gathering Wheels Bale Ramp Electric Threader

11

Printed in the U.S.A. AGCO, may at any time, and from time to time, for technical or other necessary reasons, modify any of the data, specifications or warranty of the products described herein. Some equipment shown may be optional. The information contained in this brochure is intended to be of a general nature only, specific operations may vary from the average, and both crop and machine management, as well as the weather, are important factors in the end result. Attention: Photographs in this publication may show protective shields or guards open or removed for the purposes of illustration. Be certain all shields and guards are in place during operation. AG08484 (12) 5.0 PD

AGCO Corporation · 4205 River Green Parkway, Duluth, GA 30096 · Phone 800.767.3221 Fax 770.813.6038 · www.agcocorp.com · AGCO is a Reg. TM of AGCO Corporation ©2006 AGCO Corporation

Information

12 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

100245


You might also be interested in

BETA
HSTN-LSB.indd