Read Airbus Specification / Nadcap commodity Cross Table - June 11 2010 text version

Airbus Specification / Nadcap commodity Cross Table issued June 11, 2010

Sorted by Airbus Specification Reference Foreword: This table is given for information only and shall not be considered as a reference. It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus. Revision date or issue of Airbus specifications are dated May 05, 2010. Suppliers shall use applicable specification revision date or issue as required in contract agreement or purchase order. Nadcap Commodities mandated by Airbus are: COMP = Composite Manufacturing CP = Chemical Processing ETG = Electronics HT = Heat Treating MTL = Metallic Material Testing NDT = Non Destructive Testing NMMT = Non Metallic Material Testing SE = Surface Enhancement WELD = Welding

Airbus specification family 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80 T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T Airbus Specification Reference 80-T-10-1000 80-T-20-1000 80-T-20-3000 80-T-21-0003 80-T-21-0005 80-T-21-0008 80-T-21-0009 80-T-21-0010 80-T-21-0011 80-T-21-0013 80-T-21-0014 80-T-22-1000 80-T-22-1001 80-T-22-1002 80-T-22-1100 80-T-22-1105 80-T-22-2000 80-T-22-3000 80-T-30-0032 80-T-30-0050 80-T-30-3001 80-T-30-4010 80-T-30-6900 80-T-30-6912 80-T-30-6913 80-T-30-6918 80 T 30 6918 80-T-30-6919 80-T-30-6922 80-T-30-9910 80-T-31-2900 80-T-31-2905 80-T-31-2909 80-T-31-2910 80-T-31-2911 80-T-31-2913 80-T-31-2914 80-T-31-2915 80-T-31-2916 80-T-31-2918 80-T-31-2919 80-T-31-2920 80-T-31-2925 80-T-31-2950 80-T-32-1000 80-T-32-1005 80-T-32-1011 80-T-32-1012 80-T-32-1015 80-T-32-2210 80-T-32-2310 80-T-32-2321 80-T-32-2610 80-T-32-2611 80-T-32-2612 80-T-32-2615 80-T-32-2616 80-T-32-3320 80-T-32-5000 80-T-33-3010 80-T-33-3020 80-T-33-3110 80-T-33-3111 80-T-33-3362 80-T-33-3500 80-T-33-3510 80-T-33-3515 80-T-34-0101 80-T-34-0107 Last Revision date or Issue 2007-06 2007-06 2007-06 1998-01 1997-03 2002-01 1994-06 2002-10 2007-12 2008-02 2010-04 2003-03 2003-03 2003-03 2004-08 1995-02 2003-03 2003-03 2009-12 2003-03 1998-01 2008-11 1998-02 2006-02 2007-06 2006-09 2006 09 2006-10 2005-04 2009-09 1995-02 1995-02 1997-09 2008-04 1995-02 1998-02 1999-07 2008-09 2009-08 2009-09 2005-08 1995-02 2003-09 2007-07 2000-03 1998-02 1995-09 1998-07 1995-11 2003-01 2003-03 1997-04 1995-02 2001-09 1998-02 1998-04 2008-03 1998-06 1998-04 2008-09 1998-05 1998-05 2008-10 2008-02 1995-02 2006-02 1998-05 1995-02 2007-07 Specification Designation Fertigungsanweisung Zielsetzung Fertigungsanweisung Form und Aufbau Fertigungsanweisung Erstellung Freigabe Änderung und Verwaltung Vergleichsliste Lynx-Hubschrauber 80 zu WHL Vergleichsliste General Dynamics Specifications / DA-Anweisungen Vergleichsliste Fertigungsanweisungen EADS Deutschland Programm EF2000/ Airbus Deutschla Vergleichsliste FH/DA zu FA 80 Werkstoff-Austausch-Liste ( Substitution ) Richtlinie fuer die Eintragung von FAs in Fertigungsunterlagen Vergleichsliste, Anweisungen FAL A320-Familie A-F/ A-UK/ A-D Vergleichsliste 80-T-Fertigungsanweisung / AIPS Erstellung von Arbeitsplaenen Fertigungsanweisung PA8 - Arbeitsplan Fertigungsanweisung Stammkarte Bauteilgebundene Fertigungsanweisung Fertigungsverfahrensvergleich Erstellung Verwendung und Dokumentation von Fertigungsauftraegen Zeitwirtschaft Usinage mécanique des composants en matériaux composites renforcés par des fibres Machining of GLARE ( Sawing, Milling, Drilling ) Bearbeitung von Sinterwerkstoffen für Lager und Buchsen Machining of Metallic Components Grinding of Titanium Grinding of Steel Precision Grinding of Hard Chromium Layers on Steel Finishing of Metal Components (Deburring, Cleaning) Vibratory Grinding Entgraten von Innenkonturen an metallischen Bauteilen durch Druckfliesslaeppen Drilling, Reaming and Countersinking of Rivet and Screw Holes Handling of Reaction Resin Compounds Handling of Textile Glass Products Fabrication des composants sandwich Manufacture of Structural Fiber-reinforced Plastic (FRP) Components, General Manufacture of Non structural FRP Components Removable of Epoxy Resin from Module Cores Application of Release Agent to Module Cores by the Immersion Process Manufacture of Monolithic Components by Impregnation of Dry Fibers ( RTM Process ) Reworking of Monolithic and SandwichComponents Manufacture of Monolithic Fiber-Reinforced Plastic (FRP) Components by Means of the Resin Inf Manufacture of Monolithic Components byMeans of Modified Vacuum Infusion Process (MVI Pro Production of GFPR Parts in Wet Laminating Process Compounding Semi-finished Dry Fibers by Automatic Sewing Fabrication des composants monolithiques à partir de préimprégnés Forming of Aluminium Sheets and Sections Forming of Ti and Ti¿Alloy Sheets Thermoforming of Polycarbonate Plates Thermoforming of Honeycomb Cores from Phenol Resin Bonded Polyamide Paper Manufacture of Structural FRP Components Made of Fiber Reinforced Thermoplastics Multi-roll bending of aluminum andaluminum alloy stringer sections Production of Joggles at Al-Sections Dimpling of Sheets for Attaching Parts Cold working of drilled holes with Mandrel Cold working of Holes Aushalsen von Rohrleitungen Flaring of Pipe Ends Beading of Pipe Ends Werkzeuge aus Kunststoff zum Formen und Richten von Integralbauteilen Superplastic Forming of Ti and Al alloys Scherschneiden von Blechen und Profilen Trennen von Kernverbunden Thermal Cutting of Semi-Finished Metallic Materials Laser Beam Cutting of Metallic Materials Abrasive Cutting of Metallic and Non-metallic Materials with a High-pressure Water Torch Chemical Milling General Chemical Milling of Aluminum and Aluminum Alloys Chemical Milling of Titanium and Titanium alloys Installation of Electrical Cabling Installation of Ducts for the Air Conditioning System Nadcap Commodity out out out out out out out out out out out out out out out out out out COMP out out out out out out out out out COMP COMP COMP COMP COMP out out COMP COMP COMP COMP COMP COMP COMP COMP out out out COMP out out out out out out out out out out out out out out out out CP CP CP out out Audit Criteria out out out out out out out out out out out out out out out out out out AC7118 PAR out out out out out out out out out AC7118 PAR AC7118 PAR + CP AC7118 PAR + CP AC7118 PAR + CP AC7118 PAR + CP out out AC7118 PAR AC7118 LRP + CP AC7118 AC7118 LRP + CP AC7118 LRP + CP AC7118 PAR + CP AC7118 LRP AC7118 PAR out out out AC7118 PAR + CP out out out out out out out out out out out out out out out out AC7108 AC7108 AC7108 out out

Airbus Specification / Nadcap commodity Cross Table issued June 1st, 2010

Page 1 of 21

Airbus specification family 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T

Airbus Specification Reference 80-T-34-0108 80-T-34-0109 80-T-34-0114 80-T-34-0119 80-T-34-0120 80-T-34-0122 80-T-34-0155 80-T-34-0156 80-T-34-0180 80-T-34-0185 80-T-34-3000 80-T-34-3001 80-T-34-3002 80-T-34-3003 80-T-34-3004 80-T-34-3006 80-T-34-3010 80-T-34-3011 80-T-34-3012 80-T-34-3013 80-T-34-3014 80-T-34-3015 80-T-34-3016 80-T-34-3017 80-T-34-3019 80-T-34-3020 80-T-34-3030 80-T-34-3032 80-T-34-3050 80-T-34-3200 80-T-34-3202 80-T-34-3205 80-T-34-3215 80-T-34-3314 80-T-34-3700 80-T-34-5620 80-T-34-5621 80-T-34-5661 80-T-34-5662 80-T-34-5663 80-T-34-5664 80-T-34-5665 80-T-34-5666 80-T-34-5667 80-T-34-5668 80-T-34-5669 80-T-34-5670 80-T-34-5671 80-T-34-5672 80-T-34-5673 80-T-34-5674 80-T-34-5675 80-T-34-5678 80-T-34-5679 80-T-34-5680 80-T-34-5801 80-T-34-5802 80-T-34-5803 80-T-34-5804 80-T-34-5805 80-T-34-5807 80-T-34-5809 80-T-34-5810 80-T-34-5811 80-T-34-5812 80-T-34-5814 80-T-34-5815 80-T-34-5816 80-T-34-5817 80-T-34-5818 80-T-34-5819 80-T-34-5820 80-T-34-5821 80-T-34-5822 80-T-34-5824 80-T-34-5825 80-T-34-5827 80-T-34-5829 80-T-34-5831 80-T-34-5840 80-T-34-5850 80-T-34-6100 80-T-34-6601 80-T-34-6620 80-T-34-6830 80-T-34-6900 80-T-34-6910 80-T-34-8000 80-T-34-8010 80-T-34-8030 80-T-34-8200 80-T-34-8800 80-T-34-9001 80-T-34-9006

Last Revision date or Issue 2000-10 2006-05 1998-08 2008-03 1998-08 1998-08 1998-08 1998-08 1998-08 1998-08 1998-08 2007-10 1998-08 2007-09 2007-08 2008-12 1995-02 1995-12 2001-01 2002-11 1998-08 1998-08 1992-12 2002-03 1994-05 1998-09 1994-09 1997-05 2007-10 2006-11 1996-04 1998-09 2007-06 2002-11 2007-09 1999-06 1998-08 1996-08 1998-09 2005-08 1998-08 1998-09 1998-08 1998-09 1995-02 1998-09 1999-03 1998-08 1998-08 1998-08 1998-09 1998-09 2007-07 2004-08 2008-10 1995-02 1995-02 1998-09 2007-04 1994-01 2007-04 1998-09 2007-08 1996-08 2003-06 2007-06 2005-02 1998-09 2004-04 1998-09 1998-09 1998-09 1998-09 2004-11 1998-09 1996-03 1998-09 2007-11 1998-09 1998-09 2003-08 1995-09 1998-09 2009-07 1998-09 1998-09 2001-04 1998-09 1998-09 1998-09 1998-09 1998-06 2003-11 2009-07

Specification Designation Roller Swaging of Titanium Tubes into Tube Fittings ( 3-Grooves ) Montage des Tuyauteries Rigides et des Tuyauteries Souples Installation of O-Rings in Fuel Pipes Installation of Pressure Gas Oxygen System Abdichten mit Klebband Einbau von Luftverteilerschlaeuchen und Faltbaelgen Herstellen von GFK-beschichteten Kernverbundplatten Herstellen von Kernverbundplatten mit Blechbeschichtung Installation of Calfax Live - Lock Fasteners Einbau von Acres - Uebermasshuelsen Installation of Anchor Nuts Pose des vis et des écrous Installation of Rosan Threaded Inserts Installation of Helical Threaded Inserts Ring-locked Fittings ABS0920 and ABS0921 Identification of Torque-tightened Screwed Connections Screw Locking Wire Locking Securing screwed Connections with Adhesive Securing with Lockwashers Safetying with Split Pins Securing with Washers Ecrous autofreinés Production and Assembly of Groove Nut Locking Systems Installation of Self-Cutting Screws Installation of locking systems per ABS0738 Installation of Insert Nuts in Sandwich Components

Non-structural Adhesive bonding.

Nadcap Commodity out out out out out out out out out out out out out out out out out out out out out out out out out out COMP out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out HT out out out out out out out out out out out out out out out out out out out out out out WELD out WELD WELD WELD WELD WELD WELD WELD WELD WELD out COMP

Audit Criteria out out out out out out out out out out out out out out out out out out out out out out out out out out AC7118 PAR out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out AC7102 out out out out out out out out out out out out out out out out out out out out out out AC7110 / AC7110/4 out AC7110 / AC7110/5 AC7110 / AC7110/8 AC7110 / AC7110/3 AC7110 / AC7110/6 AC7110 / AC7110/1 AC7110 / AC7110/1 AC7110 / AC7110/1 AC7110 / AC7110/1 AC7110 / AC7110/1 out AC7118 PAR

Serrage des vis et des écrous Pressing and Insertion of Bushes and Bearings Installation of spherical Plain and Rolling Bearings with Retainer Bushes Installation of Self - Clinching Studs Installation of Rivetless Nut Plates Production of Cable Controls Installation of Bearings and Bushes by Heating and/or Cooling Insertion of Insert Nuts Installation of Movable Insert Nuts Installation of Spherical Plain Bearings Rohrverbindung System BAC Production and Installation of Gamah System Pipe Couplings Aufpressen und Montage von HTE - Raflex - Kupplung Production of Hoses ( Aeroquip ) Rohrverbindungen mit Schneidring EO ( Ermeto-Original) Rohrverbindungen MS mit Schneidring Pipe Connections Flared Couplings Pipe Connections Harrison System Piping Deutsch System Rohrverbindungen System Arsaero Rohrverbindungen System Wigoflex Rohrverbindungen System Interflex Production and Installation of Gamah - Junkers Pipe Couplings Production of Flexible Hoses ( Titeflex ) Installation of Pipe Couplings with V-Clamps Production and Installation of Flexible Coupling Systems for Pipes according to ABS0395 Montage von Rynglok-Rohrverbindern auf Titanrohre Close Riveting ( Edge Sealing ) Close Riveting ( Area Sealing ) Wet Installation of Fasteners Behandlung von Al-Vollnieten vor dem Setzen Installation of Rivets with an Automatic Riveter Installation of Titanium - Niobium Solid Rivets Installation of Solid Rivets of Titanium Installation of Solid Monel Rivets Installation of Blind Rivets Installation of Lockbolts Pose des rivets pleins en aluminium Installation of Hi-Loks Installation of Bimetallic ( Cherry Buck ) Rivets Installation of Close-Tolerance Bolts (Hi-Lite, Veri-Lite) Installation of Avdel MBC Blind Rivets Installation of Composi - Lok Blind Rivets Installation of Avdel Blind Rivets Installation of Cherrylock Blind Rivets Installation of NAS Blind Rivets andMS-/NASM- and EN Blind Bolts Installation of Blind Nuts ( Davis Nut ) Installation of Blind Rivet Nuts Installation of Cherrymax Blind Rivets Installation of Taper-Loks Installation of Pop Blind Rivets Installation of Camloc Quick - Release Fasteners Automated Installation of Stump-type Lock Bolts Resistance Welding ( Spot and Seam Weld ) Repair Welding Instruction Inert Gas Fusion Welding (TIG) Diffusion Bonding (DB) Electro - Beam Welding Laser - Beam Welding Brazing Open flame Brazing Furnace Brazing High - temperature Brazing Induktionsloeten Structural Bonding of Fiber Metal Laminates - GLARE Bonding Restriction at Interfaces

Airbus Specification / Nadcap commodity Cross Table issued June 1st, 2010

Page 2 of 21

Airbus specification family 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T

Airbus Specification Reference 80-T-34-9008 80-T-34-9013 80-T-34-9014 80-T-34-9018 80-T-34-9020 80-T-34-9032 80-T-34-9033 80-T-34-9034 80-T-34-9036 80-T-34-9600 80-T-34-9601 80-T-34-9602 80-T-34-9603 80-T-34-9604 80-T-35-0001 80-T-35-0002 80-T-35-0003 80-T-35-0014 80-T-35-0015 80-T-35-0019 80-T-35-0020 80-T-35-0021 80-T-35-0023 80-T-35-0024 80-T-35-0030 80-T-35-0031 80-T-35-0033 80-T-35-0040 80-T-35-0050 80-T-35-0060 80-T-35-0090 80-T-35-0095 80-T-35-0100 80-T-35-0103 80-T-35-0104 80-T-35-0106 80-T-35-0108 80-T-35-0109 80-T-35-0110 80-T-35-0113 80-T-35-0114 80-T-35-0116 80-T-35-0118 80-T-35-0125 80-T-35-0130 80-T-35-0131 80-T-35-0132 80-T-35-0134 80-T-35-0140 80-T-35-0194 80-T-35-0196 80-T-35-0200 80-T-35-0204 80-T-35-0205 80-T-35-0206 80-T-35-0320 80-T-35-0507 80-T-35-1000 80-T-35-1101 80-T-35-1103 80-T-35-1107 80-T-35-1200 80-T-35-1201 80-T-35-2000 80-T-35-2001 80-T-35-2002 80-T-35-2003 80-T-35-2010 80-T-35-2100 80-T-35-2101 80-T-35-2102 80-T-35-2103 80-T-35-2200 80-T-35-2500 80-T-35-2501 80-T-35-2600 80-T-35-3000 80-T-35-3003 80-T-35-3200 80-T-35-3301 80-T-35-3302 80-T-35-3303 80-T-35-3304 80-T-35-3306 80-T-35-3320 80-T-35-4100 80-T-35-4200 80-T-35-4300 80-T-35-4302 80-T-35-5000 80-T-35-5001 80-T-35-5002 80-T-35-5008 80-T-35-5010

Last Revision date or Issue 2008-10 2003-11 1998-09 2006-07 1998-09 2008-07 1998-09 1995-02 2005-03 2009-06 1995-02 1995-02 1995-02 2009-03 1998-09 2005-08 2000-11 2010-01 1995-02 1993-01 2009-01 1995-02 2009-09 2006-05 2001-06 1995-02 1995-02 2006-06 2009-09 2006-08 2005-04 1993-08 2008-04 1998-11 2008-01 2010-01 1998-09 1998-11 2009-01 1998-11 1998-11 1998-11 1997-04 2010-01 2007-10 2006-05 1998-11 2002-04 2009-06 2008-01 1999-03 2008-03 1998-11 2008-03 1998-11 2005-05 1998-11 1998-05 2008-04 1998-11 1998-11 1994-11 1998-11 2006-01 2008-01 2002-02 2008-01 2007-03 2007-07 1995-02 1995-02 1995-02 2006-07 1998-11 1998-09 1998-11 2001-05 2001-05 2009-07 1999-02 1999-02 1995-02 1995-02 1999-03 1999-02 2008-08 2004-02 1999-02 1999-02 2009-07 1999-03 2006-01 2003-05 1999-03

Specification Designation Structural Bonding under Reduced Pressure Riveted Panel Joints Bonded with Cold - setting Adhesive Collage des supports Joining of Textile Floor Coverings Installation of Bearings / Bushes by Bonding Kleben nichtstruktureller Verbindungen Bonding with Adhesives on Silicone Basis Masking of bonded joints with adhesive tape Structural Bonding with Paste Adhesives Application of Sealing Compounds Sealing with Two - component Sealant on Polysulphide Basis Sealing of Composite Components Sealing of Integral Tanks Application of Silicone - Based Sealants Vapor Degreasing Reinigen von Rohren Final Cleaning of Tubes of the Oxygen System Nettoyage à l aide de solvants organiques (nettoyants à froid) Cleaning with Cold Cleaning Agents Cleaning with Emulsion Cleaning Agents Alkaline Cleaning Alkaline Cleaning of Steel Stainless Steel Mg and Nickel Alloys Ultrasonic Cleaning Spray Cleaning Electrolytic Degreasing Electrolytic Degreasing and Cleaning ( Anodic ) Electrolytic Degreasing and Cleaning ( with Reversal ) Disinfection of Potable Water System Vapour Jet Cleaning ( High Pressure ) Final Cleaning of Tubes and Components of the Oxygen System with Solvents Rinsing Water Quality Acidic Pickling of Aluminum and Aluminum Alloys Pickling of Crabon and Low - Alloy Steels Pickling of Stainless, Austenitic Steel Pickling of Titanium and Titanium Alloys - Acid Pickling of Al for Bonding Prevention of Scaling During Heat Treatment ( Chemical Coatings ) Alkaline Pickling of Aluminium and Aluminium Alloys Descaling of Titanium and Titanium Alloys in Salt Baths Pickling ( Brightening ) of Aluminium and Aluminium Alloys in Nitric Acid Pickling of Magnesium Casting Alloys in Chromic Acid Pickling of Stainless Steel prior to Bonding Activating of FRP Surfaces by Means of a Pulsed TEA-CO2 Laser Pretreatment of Non-structural Joints for Bonding Pretreatment of Polyamide for Bonding Pretreatment of Fluoroplastics for Bonding Vorbehandlung von Kunststoffteilen ( PEEK ) fuer das Kleben Pickling of Aluminium Alloys with High Silicon Content Pickling of Martensitic Steels Alkaline Pickling of Titanium and Titanium Alloys Abrasive Blasting - Cleaning Abrasive Blasting - Vapour Lapping Shot Peening Flap Peening Decorative Brushing Pickling of Magnesium Casting Alloys in Phosphoric Acid Phosphating Chromating of Aluminum and Aluminum Alloy Chromating of Mg Casting Alloys Chromium Passivation of Cadmium - Plated Surfaces Passivation of Corrosion - resistant Austenitic Steel Passivation of Martensitic Ferritic Corrosion - Resistant Steel DC Sulphuric Acid Anodizing without Sealing Sealing of Anodized Layers DC Sulphuric Acid Color Anodizing with Sealing Dichromat - Nachverdichtung von (GS) - Anodisierschichten Tartaric/Sulfuric Acid Anodizing of Aluminum Alloys Chromic Acid Anodizing Hot water Sealing of Chromic - acid Anodic Coatings Direct - Current Chromic Acid Process as Pretreatment for Bonded Joints Dichromate Sealing of Chromic Acid Anodized Layers Hartanodisieren Anodizing of Titanium and Titanium Alloys Anodizing of Ti and Ti Alloys as Pretreatment for Structural Parts to be Bonded Electrolytic Polishing of Martensitic Steel Cadmium¿Plating of Steel Cadmium - Plating of Copper Alloys Hard Chromium Plating Electrolytic Copper - Plating of Steels and Non - Ferrous Heavy Metals Electrolytic Nickel - Plating Vernickeln von hochlegierten Staehlen Silver - plating of Cu and Cu - Alloys - Electroplating Verzinnen sauer Galvanisches Auftragen von Metallschichten im Dalic - Verfahren Flame Spraying Vacuum Deposistion of Cadmium Chemical Nickel - Plating of Steel Chemical Nickel - Plating of Titanium Alloy Coating with Wash Primer Coating with Synthetic Resin Primer Containing Zinc Chromate Application des peintures primaires à deux composants (à base d'époxy) Coating with Two - Component Polyurethane Primer Surface Sealing of Mg Casting Alloys

Nadcap Commodity COMP out out out out COMP COMP out COMP out out out out out out CP CP CP CP CP CP CP CP CP CP CP CP out CP CP CP CP CP CP CP CP CP HT CP out CP CP CP out CP CP CP out CP CP CP CP CP SE SE out CP CP CP CP CP CP CP CP CP CP CP CP CP CP out CP CP CP CP CP CP CP CP CP CP CP CP CP CP out CP CP CP CP CP CP CP CP

Audit Criteria AC7118 out out out out AC7118 PAR AC7118 PAR out AC7118 PAR out out out out out out AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 out AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7102 AC7108 out AC7108 AC7108 AC7108 out AC7108 AC7108 AC7108 out AC7108 AC7108 AC7108 AC7108 AC7108 AC7117 / AC7117/3 / AC7117/5 AC7117 / AC7117/4 out AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 out AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 out AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108

Airbus Specification / Nadcap commodity Cross Table issued June 1st, 2010

Page 3 of 21

Airbus specification family 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T

Airbus Specification Reference 80-T-35-5012 80-T-35-5020 80-T-35-5021 80-T-35-5022 80-T-35-5023 80-T-35-5024 80-T-35-5025 80-T-35-5030 80-T-35-5035 80-T-35-5100 80-T-35-5101 80-T-35-5103 80-T-35-5106 80-T-35-5107 80-T-35-5130 80-T-35-5190 80-T-35-5202 80-T-35-5203 80-T-35-5212 80-T-35-5218 80-T-35-5250 80-T-35-5254 80-T-35-5256 80-T-35-5260 80-T-35-5269 80-T-35-5279 80-T-35-5400 80-T-35-5401 80-T-35-5402 80-T-35-5403 80-T-35-5404 80-T-35-5601 80-T-35-5701 80-T-35-5702 80-T-35-5704 80-T-35-5706 80-T-35-5720 80-T-35-5801 80-T-35-5900 80-T-35-5901 80-T-35-5902 80-T-35-5903 80-T-35-5905 80-T-35-9021 80-T-35-9022 80-T-35-9023 80-T-35-9030 80-T-35-9040 80-T-35-9050 80-T-35-9110 80-T-35-9115 80-T-35-9120 80-T-35-9121 80-T-35-9122 80-T-35-9123 80-T-35-9124 80-T-35-9125 80-T-35-9126 80-T-35-9127 80-T-35-9135 80-T-35-9136 80-T-35-9799 80-T-36-1010 80-T-36-1015 80-T-36-1020 80-T-36-3001 80-T-36-3050 80-T-36-3201 80-T-36-3300 80-T-36-3400 80-T-39-0109 80-T-39-0110 80-T-39-0116 80-T-39-0117 80-T-39-0118 80-T-39-0121 80-T-39-0125 80-T-39-0131 80-T-39-0132 80-T-39-0133 80-T-39-0134 80-T-39-0136 80-T-39-0138 80-T-39-0140 80-T-39-0141 80-T-39-0221 80-T-39-0230 80-T-39-0231 80-T-39-0235 80-T-39-0331 80-T-39-0401 80-T-39-0501 80-T-39-0600 80-T-39-0950

Last Revision date or Issue 1995-02 1995-02 1998-09 1995-02 1999-01 2009-01 2002-01 2009-09 2009-08 1994-03 1994-09 1999-03 2006-02 2006-11 2009-09 1999-03 2008-04 1995-02 1999-07 2009-09 2006-05 2009-09 1999-08 1995-02 1999-03 1999-03 1999-03 2008-11 1999-03 1995-06 2004-07 2008-05 1999-03 2005-09 2005-07 1999-03 1999-03 2007-11 2007-06 2007-06 1999-03 2009-02 2009-02 2003-01 1998-01 2000-10 2008-04 2009-08 1995-02 1995-02 1995-02 2009-11 1995-02 1999-03 2006-03 1999-03 2008-04 2007-09 2009-08 2006-03 2007-03 2009-03 2010-02 2009-11 2009-11 1999-07 1994-03 1999-07 1999-07 1993-07 2008-03 2009-02 1999-07 2004-01 2006-11 1999-07 2002-04 2008-10 2008-02 1999-09 2003-06 2000-03 1995-02 1993-09 2007-10 1995-02 2009-06 1995-06 2009-08 2009-09 1999-09 2000-09 2004-09 2007-06

Specification Designation Protections of Parts in Storage and Intermediate Storage during Production Two - component Zinc - chromate Primer Two - component Zinc - chromate Primer ( EP - based ) Application des peintures primaires à deux composants (à base d'époxy) Coating with Two¿Component EP¿based Primer,Chromate¿free Coating with Two - component Polyurethane Primer Chromate - free Coating with Two - component Primer Chromate - free Coating with Two/Three-component Water-based Primer Beschichten mit zweikomponenten wasser- basierendem Grundanstrich für Faserverbund- werks Beschichten mit Einschichtlack Coating with two-component EP-based top varnish Beschichten mit Nitro - Kombinationslack Application de peinture de finition à base de polyuréthane Coating of Tank Compartments Fungicide Coating with Two/Three-component Water-based Top Coat Coating with Copolymerized Silicon Alkyd Top Coat Coating with Highly Elastic Paints Coating with Antistatic Varnish Coating with Anti - Slip Paint Application of Elastic Protective Coatings Application of Peelable Protective Coatings Coating with Pur-Based Varnish Abrasion-Resistant Coating with Conductive Paint Two - component PUR Conductive Varnish Mean Resistivity Beschichten mit Brandschutzfarbe ( BSF ) Beschichten mit Decklack fuer Brandschutzfarbe ( BSF ) Application of Fine Powder Layers Electrostatic Powder Coating of Al-Components Application of Fine Layers ( Gelcoat Adhesive Film ) Application of PVF Foil Application of Filler Whirl Sintering Korrosionsschutz der Steuerseile Preservation for Intermediate Storage Behandeln mit Korrosionsschutzmittel Behandeln mit Leinoel Post - Preservation of Anodized and Sealed Components Treatment with Synthetic Lubricants Treatment with Oven - Drying Molybdenum Disulphide ( MoS2 ) Lubricant Treatment with Air-Drying Molybdenum Disulphide ( MoS2 ) Lubricants Behandeln mit Molybdaendisulfid - Schmiermitteln und -pasten Assembly with Duroplastic Anti-corrosive Compound, Zink Chromate Based Wet Assembly of Components with Corrosion Preventives on a Chromate Basis Preservation of Cut Edges Removal of Hardened Adhesive from Bonded Joints Preservation of Rivet Rows Application of Fillers Coating with Erosion-resistant and Anti-staticVarnish Smoothing of FRP Components Spraying Cup Gun Airless Spraying Coating with Paints and Varnishes, General Processing of Wash Primer Primer and Top Coat Primer, Verarbeiten von Anstrichstoffen fuer besondere Zwecke Paint Coating in Interior Furnishing Repair of Paint Coatings on Metallic and Non-Metallic Surfaces Removal of Organic Coatings Mechanisches Entschichten Flugzeugaussenanstrich In-Form-Beschichtung für Innenausstattungs-Bauteile Decorative Water Transfer Printing in Interior Furnishing Application des produits de protection hydrofuges, déplaçant l'eau, inhibiteurs de corrosion Waermebehandlung von Aluminium Heat Treatment of Titanium Heat Treatment of Steel Case Hardening ( Carburization ) Gasnitrieren Bath Nitriding ( Tenifer Treatment ) Dehydrogenation of Steels Dehydrogenation of Titanium and Titanium Alloys Isolation et chauffage des conduites d'eau Production of Piping Installation of Shims in Metallic Structures Obturateurs pour tuyaux rigides, tuyaux souples et équipements Application of Gap Fillers Introduction of Core and Edge Filler Compounds into Sandwich Components Surface Protection and Installation of Scuff Plates/Anti-chafing Plates Herstellen und Beschriften von Kennzeichnungsschildern Marking with Indelible Ink Identification by Embossing Making by Vibro - Engraving Identification by Electrochemical Etching Identification with Felt-tip Pen Identification by Defined Embossing ( Borries Embossing ) Mise en place et protection des étiquettes d'identification et des plaquettes indicatrices Manufacture of Floor Panels from Prepreg Treatment of Damage on Sheet-metal Parts made of Aluminium-Alloy Removal of Surface Damage on Acrylic Glass ( Stretched ) Cleaning and Protection of Cabin Window Panes Fabrication, pose et réparation des matelas d'isolation Anwendung von Trockenmitteln Prevention of Corrosion During Production Application des matériaux d'étanchéité fusibles Application of Adhesive Films to the Outer Skin (Decoration Sheets)

Nadcap Commodity out CP CP out CP CP CP CP CP CP CP out CP out CP out CP CP CP CP CP CP CP CP out out CP CP out out out out out out out out CP out out CP out out out out out out out CP out out out CP CP out CP CP CP out out out out CP HT HT HT HT HT HT HT HT out out out out out COMP CP out out out out out out out out COMP CP out CP out out out CP out

Audit Criteria out AC7108 AC7108 out AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 out AC7108 out AC7108 out AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 out out AC7108 AC7108 out out out out out out out out AC7108 out out AC7108 out out out out out out out AC7108 out out out AC7108 AC7108 out AC7108 AC7108 AC7108 out out out out AC7108 AC7102 / AC7102/2 AC7102 AC7102 AC7102 / AC7102/3 AC7102 / AC7102/4 AC7102 / AC7102/4 AC7102 AC7102 out out out out out AC7118 CP AC7108 out out out out out out out out AC7118 PAR + CP AC7108 out AC7108 out out out AC7108 out

Airbus Specification / Nadcap commodity Cross Table issued June 1st, 2010

Page 4 of 21

Airbus specification family 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T 80-T ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP

Airbus Specification Reference 80-T-39-1020 80-T-39-1021 80-T-39-1022 80-T-39-1023 80-T-39-1024 80-T-39-1025 80-T-39-1027 80-T-39-1028 80-T-39-1035 80-T-39-1038 80-T-39-4030 80-T-40-0101 80-T-40-0102 80-T-40-0103 80-T-40-0105 80-T-40-0107 80-T-40-0108 80-T-40-3050 80-T-40-3100 80-T-40-3200 80-T-40-3201 80-T-40-3202 80-T-40-3203 80-T-40-3204 80-T-40-3209 80-T-40-3210 80-T-40-3213 80-T-40-3214 80-T-40-3215 80-T-40-3217 80-T-40-3218 80-T-40-3219 80-T-40-3220 80-T-40-3310 80-T-40-3312 80-T-40-3500 80-T-40-3701 80-T-40-3702 80-T-40-3703 80-T-40-3710 80-T-40-3711 80-T-40-3712 80-T-40-3713 80-T-40-3714 80-T-40-3735 80-T-40-3736 80-T-40-3737 80-T-40-4001 80-T-40-5001 80-T-40-8100 80-T-40-8103 80-T-40-8105 80-T-40-8110 80-T-50-0005 80-T-50-1010 80-T-50-3005 80-T-50-3100 80-T-50-4005 80-T-50-4011 80-T-50-4015 80-T-50-4020 80-T-50-4030 80-T-50-4050 80-T-50-4060 80-T-50-5010 80-T-50-6001 80-T-50-6002 80-T-50-6003 80-T-50-6004 ABP0-0001 ABP0-0003 ABP0-1004 ABP0-1005 ABP0-1006 ABP0-1007 ABP0-1008 ABP0-1009 ABP0-1010 ABP0-1012 ABP0-1013 ABP0-1014 ABP0-1015 ABP0-1016 ABP0-1341 ABP0-2017 ABP0-2018 ABP0-2019 ABP0-2020 ABP0-2021 ABP1-1022 ABP1-1023 ABP1-1024 ABP1-1025 ABP1-2026

Last Revision date or Issue 2008-10 2005-08 2005-06 2008-03 2007-08 1999-10 2005-01 2009-03 2005-06 2008-02 1994-02 2009-11 2009-03 2008-04 2008-04 2003-08 2008-10 2008-02 2005-02 2009-10 1994-04 1996-03 2007-02 2009-07 1995-02 2008-02 2006-05 2007-08 2009-02 2008-03 2007-08 2006-12 2003-03 2008-01 2008-10 1999-09 2009-02 2009-01 1999-09 2005-01 2009-04 2009-12 2009-04 2004-12 1999-09 1999-09 2005-12 2007-11 2009-08 1999-09 2007-11 1995-12 2008-05 1995-02 1995-02 1999-06 1999-06 1997-09 1999-06 1999-06 1999-06 1997-04 1999-06 1999-06 1999-06 1999-06 1995-06 1995-06 1997-09 4 52 3 2 2 1 2 1 3 1 8 7 1 1 4 2 5 4 3 1-2 2-1 5 3 2 3

Specification Designation Anbringen von Kennzeichnungen an Rohrleitungen Application of dry transfer decals Soudage de revêtements de sol non textiles en polychlorure de vinyle (PVC) Application of Textile Floor Coverings Application de revêtements de sol non textiles Application of Activated Decals Application of Decoration Sheets Silk Screen Printing of Texts and Pictures Installation and Removal of Ceiling Panels Evening up of Height Displacement of Floor Panels Application of Chafing Strips Installation of Cable Harnesses in Aircraft Installation of Fiber-Optical Cables in Aircraft Assembly of Optical Connectors ABS0929-003 and ABS0929-004 Montage von LWL-Kontakten ABS1379-003 Installation of Quadrax Components Montage von Twinax-Komponenten Couples de serrage pour le montage des composants électriques (montage final) Assembly of ABS1069 Backshells Connecteurs électriques Locking of Connectors with Adhesive Freinage des prises et des interrupteurs électriques au fil à freiner Production of Coaxial Connectors Special Contacts (Coaxial) Backshells for Connectors Installation of Pressure-tight Grommets Montage des barrettes Torsadage des câbles électriques Protection of Electrical Connectors Crimpen von Kabelschuhen Stripping of Electrical Cables Sertissage des contacts spéciaux Installation of Crimped Connectors for Screened Cables Splices and End Caps Electrical bonding Cleaning and Preversation of Electronic Assemblies Frettage des faisceaux électriques Installation of Cable Guides and Supports Elektrische Installation in starren Leitungen Heat Shrinkable Hoses and Mouldings Marking of Electrical Equipment Components Gaines de protection pour câbles électriques Lightning Protection for Cables Marking of Electrical Cables with UV Laser Handling of Electrostatically Sensitive Electronic Components Provision of Electronic Components Cleaning of Components of the Electrical System after Installation Sertissage des contacts ronds sur les câbles électriques en cuivre Crimping of Circular Contacts to Aluminum Cables Soldering of Electrical Connections by Hand Shrinking-on of Soldering Sleeves Soldering with Soldering Machines Soldering of Electrical Connections by Soldering Systems - Convection Soldering Systems, Konstruktions-, Fertigungs- und Abnahmeanweisung fuer Hartchromteile Fertigung von Passagierraum- und Frachtraum - Fußbodenplatten Scherschneiden der Titan-Rißstopper Installation of Floor Structure, Sect. 17 ¿ 18, Program: A320 Oberflaechenschutz und Montage der Scuff-Plates Auftragen von Dichtmasse an der Landeklappe Einbringen von PR 2752 zur Randwinkelverstaerkung an der Druckkalotte Oberflaechenschutz des Innenstruktur von Cargo-Doors bis zur Einfuehrung der Mod.5568 D 461 Kleben des Scheuerschutzes an den Landeklappen des A310 und A320 Perforieren von Klebfolie und Aufschrumpfen auf die Wabenstege Auftragen von Spaltfueller zwischen HLW und HLW-Schild Auftragen von Trennmittel auf Modulkerne im Tauchverfahren Leichtstoff-Fuellmasse ( Mikro-Hohlkugeln ) Auftragen des provisorisches Trennmittels Natriumalginat Wasserloesliches Bolzenschmiermittel Nacharbeiten von Korrosionsschutzbehandlung Flugzeugzelle innen INTRODUCTION TO AND CONTROL OF ABPSPECIFICATIONS INDEX OF GENERAL MANUFACTURING SPECIFICATION CONTROL AND APPROVAL OF DEVIATIONS FROM ABPSPECIFICATION BY PSD CONTROL OF APPROVED ALTERNATIVE ABPSPECIFICATIONS CONTROL FOR THE CONVERSION OF MATERIALS TO OTHER SPECIFICATIONS CONTROL OF THE EFFECT OF METRIFICATION ON NON-METALLIC MATERIALS CONTROL OF THE EFFECT OF METRIFICATION ON METALLIC MATERIALS CONTROL OF CORROSION BY FIRE EXTINGUISHANTS CONTROL OF DESIGN AUTHORITY APPROVED TECHNIQUE SHEETS CONTROL OF APPROVAL AND ACCEPTANCE OF NON-BAEMETALLIC SPECIFICATIONS CONTROL OF PROTECTIVE TREATMENT AND FINISHING FOR AIRBUS WING CONTROL AND DEFINITION OF PROTECTIVE TREATMENT CODES CONTROL OF STORAGE AND SHELF-LIFEFOR PREPREG AND ADHESIVE MATERIALS CONTROL OF MASTER PYROMETER CALIBRATION CONTROL OF APPROVED ALTERNATIVE STANDARD PARTS FOR FASTENING SUPPLY OF ALUMINIUM PLATE WITH ULTRASONIC FLAW DETECTION SUPPLY OF CASTINGS SUPPLY OF FORGINGS SUPPLY OF PLASTIC COMPONENTS SUPPLY OF HIGHLY STRESSED EXTRUSIONS HARD ANODISING OF ALUMINIUM CHROMIC ACID ANODISING OF ALUMINIUM SULPHURIC ACID ANODISING OF ALUMINIUM SULPHURIC ACID ANODISING OF TITANIUM SHOT PEEN FORMING AND DISTORTION CORRECTION OF METAL PARTS

Nadcap Commodity out out out out out out out out out out CP out out out out out out out out out out out out out out out out out out out out out out out out ETG out out out out out out out out ETG out out out out ETG out ETG ETG out COMP out out CP out out out out COMP out COMP out out out out out out out out out out out out out out out out COMP HT out NDT NDT NDT out out CP CP CP CP SE

Audit Criteria out out out out out out out out out out AC7108 out out out out out out out out out out out out out out out out out out out out out out out out AC7120 out out out out out out out out AC7120 out out out out AC7120 out AC7120 AC7120 out AC7118 PAR + CP out out AC7108 out out out out AC7118 MB out AC7118 MB out out out out out out out out out out out out out out out out AC7118 PAR + CP + LRP AC7102 out AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/4 / AC7114/4S AC7114 / AC7114/3 / AC7114/3S out out AC7108 AC7108 AC7108 AC7108 AC7117 / AC7117/3

Airbus Specification / Nadcap commodity Cross Table issued June 1st, 2010

Page 5 of 21

Airbus specification family ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP

Airbus Specification Reference ABP1-2028 ABP1-2029 ABP1-2030 ABP1-2035 ABP1-2343 ABP1-2344 ABP1-2353 ABP1-3037 ABP1-3038 ABP1-3039 ABP1-3334 ABP1-4040 ABP1-4041 ABP1-4042 ABP1-4043 ABP1-4044 ABP1-4045 ABP1-4046 ABP1-4047 ABP1-4049 ABP1-4053 ABP1-4054 ABP1-4055 ABP1-4327 ABP1-5056 ABP1-5057 ABP1-5058 ABP1-5062 ABP2-1063 ABP2-1064 ABP2-1065 ABP2-1066 ABP2-1067 ABP2-1068 ABP2-1069 ABP2-1070 ABP2-1071 ABP2-1072 ABP2-1347 ABP2-2073 ABP2-2074 ABP2-2075 ABP2-2076 ABP2-2077 ABP2-2078 ABP2-2079 ABP2-2080 ABP2-2081 ABP2-2082 ABP2-2083 ABP2-2084 ABP2-2085 ABP2-2086 ABP2-2087 ABP2-2333 ABP2-2336 ABP2-2337 ABP2-3088 ABP2-3089 ABP2-3090 ABP2-3091 ABP2-3092 ABP2-3093 ABP2-3094 ABP2-3095 ABP2-3096 ABP2-3097 ABP2-4098 ABP2-4099 ABP2-4100 ABP2-4102 ABP2-4103 ABP2-4104 ABP2-4105 ABP2-4106 ABP2-4107 ABP2-4355 ABP2-4358 ABP3-1108 ABP3-1109 ABP3-1110 ABP3-1112 ABP3-1114 ABP3-1115 ABP3-1116 ABP3-1117 ABP3-1118 ABP3-1119 ABP3-1120 ABP3-1366 ABP4-1121 ABP4-1123 ABP4-1352 ABP4-2124

Last Revision date or Issue 9 3 2 1 1-2 4 1 2 4-1 2 4 2 2 2 2 1 2 6 3 2 3 2 4 2 2-1 5-2 2-3 3 1-1 2-4 2 1 2 1 1-4 3 1 2-1 1 1 1 5 1 1 1 2 1 2--3 1-1 3-1 1 2-1 1 1 1 4 2-1 2-1 1 1 1 1 4 2-1 1-1 1-1 1 2 6-2 4-2 7-6 4 2-1 2 4 2 3-3 2 2 5 4 2 2 3 5 4 2 7 1-3 1 3 14 2-1 4-3

Specification Designation

Nadcap Commodity SE SE SE out out CP SE out out out out CP CP CP CP CP out CP CP CP out COMP CP out CP CP CP CP out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out COMP COMP out out out COMP COMP out out WELD WELD WELD WELD WELD WELD WELD WELD out WELD out HT HT HT HT HT HT HT HT HT HT HT HT CP CP out CP

Audit Criteria AC7117 / AC7117/3 / AC7117/5 AC7117 / AC7117/2 / AC7117/5 AC7117 / AC7117/4 out out AC7108 AC7117 out out out out AC7108 AC7108 AC7108 AC7108 AC7108 out AC7108 AC7108 AC7108 out AC7118 AC7108 out AC7108 AC7108 AC7108 AC7108 out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out AC7118 PAR AC7118 PAR out out out AC7118 PAR AC7118 PAR out out AC7110 / AC7110/4 AC7110 AC7110 / AC7110/4 AC7110 / AC7110/5 AC7110 / AC7110/5 AC7110 / AC7110/3 AC7110 / AC7110/1 AC7110 / AC7110/1 out AC7110 / AC7110/5 out AC7102 AC7102 AC7102 AC7102 / AC7102/4 AC7102 / AC7102/4 AC7102 / AC7102/4 AC7102 / AC7102/4 AC7102 AC7102 AC7102 AC7102 AC7102 AC7108 AC7108 out AC7108

SHOT PEENING FOR IMPROVED FATIGUE AND STRESS CORROSION RESISTANCE SURFACE IMPROVEMENT USING GLASS BEADS SURFACE IMPROVEMENT USING ROTARY FLAP PEENING COLD WORKING OF HOLES SPLIT MANDREL COLD WORKING OF HOLES CLEANING AND SURFACE IMPROVEMENT BY BLASTING SHOT PEENING GENERAL REQUIREMENTS DEPOSITION COATING USING THE DETONATION GUN OR HIGH VELOCITY OXY-FUEL PRO DEPOSITION OF ZINC BY SPRAYING DEPOSITION OF ALUMINIUM SPRAYING DEPOSITION OF TITANIUM NITRIDE BY PHYSICAL VAPOUR DEPOSITION (PVD) CADMIUM PLATING WITH A PORTABLE NON-IMMERSION ELECTROPLATING SYSTEM CADMIUM PLATING OF STEELS NICKEL ALLOYS & COPPER ALLOYS HARD CHROMIUM PLATING ZINC PLATING OF STEELS & COPPER ALLOYS TEMPORARY PROTECTION AGAINST SURFACE DAMAGE COATING OF ALUMINIUM BY ELECTROSTATICALLY SPRAYING WITH NYLON OR EPOXY TEMPORARY PROTECTION OF METALLIC MATERIALS AGAINST CORROSION COATING OF METALLIC MATERIALS WITH NYLON PREPARATION OF METALLIC MATERIALS FOR PLATING SODIUM ALGINATE TEMPORARY RELEASE AGENTS RELEASE AGENTS FOR SPECIFIED PURPOSES COATING WITH HEAT CURED LUBRICANT COATING OF BOLTS AND FASTENERS WITH LUBRICANT PRIOR TO FASTENING

Phosphating of steel

CONVERSION COATING OF ALUMINIUM CHROMATE PASSIVATION OF CADMIUM AND ZINC PASSIVATION OF STEELS AND NICKEL ALLOYS AUTOMATED RIVETING OF ALUMINIUM STRUCTURE WITH PRE-FORMED SOLID RIVETS AUTOMATED RIVETING OF ALUMINIUM STRUCTURE WITH SLUG RIVETS ( DRIVMATIC ) RIVETING WITH BLIND NUT PLATE RIVETS RIVETING WITH BLIND STEM LOCK RIVETS ( AVDEL ) RIVETING WITH BLIND RIVETS RIVETING WITH BLIND RIVETS ( CHOBERT ) RIVETING WITH BLIND FLUSH BREAK RIVETS ( AVDEL MBC ) AUTOMATED RIVETING OF ALUMINIUM STRUCTURE WITH SLUG RIVETS ( LVER ) MILLING THE HEADS OF RIVETS AFTER RIVETING MANUAL RIVETING WITH PRE-FORMED SOLID RIVETS MANUAL RIVETING OF ALUMINIUM STRUCTURE WITH SLUG RIVETS (LVER HAND GUNS) MANUAL FASTENING WITH SELF LOCKING BLIND BOLTS MANUAL FASTENING WITH POINT DRIVE BOLTS MANUAL FASTENING WITH SHORT THREAD POINT DRIVE BOLTS MANUAL FASTENING WITH QUICK RELEASE FASTENERS ( CAMLOC ) MANUAL FASTENING WITH BLIND BOLTS ( COMPOSI-LOK ) MANUAL FASTENING WITH QUICK RELEASE FASTENERS ( DZUS ) MANUAL FASTENING WITH PULL TYPE LOCK BOLTS MANUAL FASTENING WITH BLIND BOLTS ( JO-BOLTS ) MANUAL FASTENING WITH 4-START QUICK RELEASE FASTENERS SHRINK FITTING OF BOLTS BUSHES PINS AND OTHER FASTENING PARTS MANUAL FASTENING WITH TAPERED SHANK BOLTS ( TAPER LOK ) MANUAL FASTENING INTO PARALLEL INTERFERENCE FIT HOLES II AUTOMATED FASTENING WITH STUMP TYPE LOCKBOLTS MANUFACTURE OF SERRATED FASTENING PARTS FOR LOCKING ( STA-LOK NUT ) FASTENING OF JOINTS CONTAININGSEALANT BY TORQUE TIGHTENING MANUFACTURE AND INSPECTION OF ROLLED THREADS ON FASTENINGPARTS AND COM COMMON REQUIREMENTS FOR INSTALLING BOLTS, STUDS, NUTS AND OTHER FASTENI MANUAL FASTENING WITH SINGLE ACTION LOCKING BLIND BOLTS

Installation of cold expanded retainers

INSTALLING METALLIC INSERTS ( SHUR-LOK - HOT MELT ) INSTALLING ALUMINIUM TWO-PART INSERTS ( SHUR-LOK ) LOCKING AND REMOVAL OF SERRATED FASTENING PARTS ( STA-LOK NUT ) LOCKING OF FASTENING PARTS USING TAB WASHERS LOCKING OF FASTENING PARTS USING ANAEROBIC MATERIALS INSTALLING METALLIC INSERTS ( SHUR-TAB ) INSTALLING METALLIC INSERTS ( ACRES SLEEVES ) LOCKING OF FASTENING PARTS USING WIRELOCKING PREPARATION OF COUNTERSUNK HOLES IN METALLIC MATERIALS FOR FASTENING AN QUALIFICATION OF RESISTANCE WELDING MACHINES AND WELD SCHEDULES APPROVAL OF WELDING AND BRAZING OPERATORS ELECTRIC RESISTANCE WELDING TUNGSTEN INERT GAS ( TIG ) WELDING PLASMA ARC WELDING ELECTRON BEAM WELDING MANUAL BRAZING OF STEELS COPPER AND NICKEL ALLOYS MANUAL BRAZING OF ALUMINIUM USING SILICON ROD SOLDERING ACCEPTANCE STANDARDS FOR TUNGSTEN INERT GAS ( T.I.G.) & PLASMA ARC WELDING RESISTANCE WELDING OF THERMOPLASTIC MATERIALS SURFACE PROTECTION DURING HEAT TREATMENT HEAT TREATMENT CONTROL TEST PIECES THE USE OF POLYALKYLENE GLYCOL QUENCHANT DURING HEAT TREATMENT THE STOPPING-OFF OF STEELS DURING HEAT TREATMENT NITRIDING OF STEELS STRESS RELIEVING HEAT TREATMENT OF STEELS AND NICKEL ALLOYS HEAT TREATMENT OF STEELS HEAT TREATMENT OF TITANIUM HEAT TREATMENT OF RIVETS PRIOR TO RIVETING HEAT TREATMENT OF ALUMINIUM REFRIGERATED STORAGE OF ALUMINIUM AFTER HEAT TREATMENT CARBURISING AND CARBO-NITRIDING AND HEAT TREATMENT OF CARBURISING STEELS APPLICATION OF BONDING PRIMER AS EROSION RESISTANT COATING APPLICATION OF CORROSION INHIBITING PRIMER TO AN INTERNAL OR EXTERNAL SURF APPLICATION OF CHROMATE-FREE PRIMER AS A SEALING COAT FOR A380 WING TRANS APPLICATION OF ABRASION RESISTANT PAINT

Airbus Specification / Nadcap commodity Cross Table issued June 1st, 2010

Page 6 of 21

Airbus specification family ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP

Airbus Specification Reference ABP4-2125 ABP4-2126 ABP4-2127 ABP4-2128 ABP4-2130 ABP4-2131 ABP4-2133 ABP4-2361 ABP4-2364 ABP4-3135 ABP4-3136 ABP4-3137 ABP4-3138 ABP4-3329 ABP4-3350 ABP4-4139 ABP4-4140 ABP4-5141 ABP4-5142 ABP4-5143 ABP4-5144 ABP4-5145 ABP4-5365 ABP5-1146 ABP5-1147 ABP5-1148 ABP5-1149 ABP5-1152 ABP5-1153 ABP5-1155 ABP5-1158 ABP5-1159 ABP5-1160 ABP5-1161 ABP5-1162 ABP5-1164 ABP5-1165 ABP5-1351 ABP6-1166 ABP6-1167 ABP6-1168 ABP6-1170 ABP6-1173 ABP6-1174 ABP6-1177 ABP6-1178 ABP6-1179 ABP6-1180 ABP6-1182 ABP6-2183 ABP6-2184 ABP6-2185 ABP6-2186 ABP6-2187 ABP6-2188 ABP6-2189 ABP6-2190 ABP6-2191 ABP6-2192 ABP6-2193 ABP6-2194 ABP6-2195 ABP6-2196 ABP6-2197 ABP6-2198 ABP6-2199 ABP6-2200 ABP6-2326 ABP6-2328 ABP6-2348 ABP6-2356 ABP6-2357 ABP6-2360 ABP6-3201 ABP6-3202 ABP6-3203 ABP6-3204 ABP6-3205 ABP6-3206 ABP6-3207 ABP6-3208 ABP6-3209 ABP6-3210 ABP6-3211 ABP6-3212 ABP6-3213 ABP6-3214 ABP6-3215 ABP6-3216 ABP6-3217 ABP6-3218 ABP6-3219 ABP6-3345 ABP6-3349

Last Revision date or Issue 4-2 4-2 12-1 8 12 3 7 1 5 3 5 1 1 3 1 2 1 12 12 3 4 2-1 3 1 1 1 4 3 4 1 3 1 1 2 9 2 1 5 9-3 9 1 1 1 3 2 1 1 1 2 2-2 2 5 2 1 2 5 1 1 1 1 1 1 2 1 1 1 1 2 1 3 2 1 2 6 2-5 3 2 1 2-1 1 3 1 2 1 1 2 1 2 2 1 1 1 1 3-3

Specification Designation

Nadcap Commodity CP CP CP CP CP CP CP CP CP CP out out out out CP CP CP out out out out out out COMP COMP COMP out COMP out out out out out COMP out out out CP out out out out out out out out out out out COMP out COMP COMP COMP COMP COMP COMP COMP COMP out out out out out out out out COMP COMP COMP out out COMP out out out CP out out out out out out out out out out out out out out out out out

Audit Criteria AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 out out out out AC7108 AC7108 AC7108 out out out out out out AC7118 MB AC7118 PAR AC7118 PAR out AC7118 PAR out out out out out AC7118 PAR out out out AC7108 out out out out out out out out out out out AC7118 PAR out AC7118 PAR + CP AC7118 MB AC7118 MB AC7118 PAR AC7118 PAR + CP AC7118 PAR AC7118 PAR AC7118 PAR out out out out out out out out AC7118 MB AC7118 MB AC7118 LRP + CP out out AC7118 LRP + CP out out out AC7108 out out out out out out out out out out out out out out out out out

APPLICATION OF ANTI-STATIC PAINT TO COMPOSITES EXCLUDING CARBON FIBRE APPLICATION OF POLYURETHANE FINISH PAINTS TO AN INTERNAL OR EXTERNAL SURF APPLICATION OF FLEXIBLE FINISH PAINT SCHEME INCORPORATING A CHROMATED PRIM APPLICATION OF POLYURETHANE PAINTS AND VARNISHES FOR OVERCOATING OF SEA APPLICATION OF FLEXIBLE FINISH PAINT TO AN INTERNAL SURFACE APPLICATION OF HIGH TEMPERATURE STOVE ENAMEL PAINT TO STEELS APPLICATION OF EROSION RESISTANT PAINT APPLICATION OF ANTI-SLIP EMERGENCY / WALKWAY PAINTS APPLICATION OF FLEXIBLE FINISH PAINT SCHEME INCORPORATING A CHROMATE-FREE APPLICATION OF FILLER TO SMALL HOLES APPLICATION OF PASTE FILLER FOR GAP FILLING AND SHIMMING APPLICATION OF FILLER FOR GAP FILLING ( HERMETITE DOUBLE BOND ) APPLICATION OF EPOXY FILLER TO HOLES APPPLICATION OF AERODYNAMIC FILLER SEALANT APPLICATION OF PINHOLE FILLER STRIPPING OF PAINTS BY BLASTING ( PAINTBLAST ) STRIPPING OF PAINTS BY CHEMICAL METHODS APPLICATION OF SEALANT FOR INTEGRAL FUEL TANKS APPLICATION OF SEALANT FOR GENERAL AIRCRAFT STRUCTURE APPLICATION OF HIGH TEMPERATURE SILICONE SEALANT APPLICATION OF NON-HARDENING JOINTING COMPOUNDS AS SEALANT

Application of non hardening jointing compounds

APPLICATION METHODS FOR THE USE OF SEALANT FOAM PREPARATION OF METALLIC MATERIALS FOR ADHESIVE BONDING PREPARATION OF RUBBER FOR ADHESIVE BONDING PREPARATION OF PTFE FOR ADHESIVE BONDING ADHESIVE BONDING WITH TWO PART EPOXY.( HYSOL AND 3M ) ADHESIVE BONDING USING SEALANT ADHESIVE BONDING OF SILICONE RUBBER WITH SILICONE ADHESIVE ADHESIVE BONDING WITH TWO PART NEOPRENE ( BOSTIK 2402 ) ADHESIVE BONDING WITH TWO PART EPOXY (ARALDITE) ADHESIVE BONDING WITH ONE PART HEAT CURING EPOXY ( EC2214 ) ADHESIVE BONDING WITH TWO PART EPOXY ( REDUX 410NA ) ADHESIVE BONDING WITH ONE PART NEOPRENE (EVOSTIK 528) ADHESIVE BONDING WITH TWO PART ACRYLIC ADHESIVE BONDING OF CURED FIBRE REINFORCED COMPOSITES ADHESIVE BONDING OF ACRYLIC ( TENSOL CEMENTS ETC. ) SURFACE PREPARATION PRIOR TO APPLICATION OF PAINTS INSTALLATION COUPLINGS (GAMAH) COMMON REQUIREMENTS FOR THE MANUFACTURE TESTING AND INSTALLING OF PIPES INSTALLING COUPLINGS ( PERI-SEAL ) INSTALLING COUPLINGS ( HITEMP-RAFLEX ) MAINTENANCE AND INSTALLING COUPLINGS ( JANITROL ) INSTALLING COUPLINGS ON PIPES (PERMASWAGE) SWAGING OF NON OXYGEN PIPES AND COUPLINGS SWAGING OF METRIC PIPES AND COUPLINGS ( SBAC ) SWAGING OF LOW PRESSURE PIPES AND COUPLINGS INSTALLING COUPLINGS ( AEROQUIP J13 ) INSTALLING AND REMOVING O CLIPS USED WITH HOSES MACHINING COMPOSITES MANUFACTURE OF ALUMINIUM SKINNED HONEYCOMB COMPOSITES ( GENERAL ) MANUFACTURE OF CARBON-FIBRE EPOXY PREPREG COMPOSITES BY AUTOCLAVE MANUFACTURE OF ALUMINIUM SKINNED HONEYCOMB COMPOSITES (BSL 312) MANUFACTURE OF ALUMINIUM SKINNED HONEYCOMB COMPOSITES (R382) MANUFACTURE OF GLASS-FIBRE EPOXY PREPREG COMPOSITES BY VACUUM BAG MANUFACTURE OF GLASS-FIBRE AND ARAMID-FIBRE EPOXY PREPREG COMPOSITES BY MANUFACTURE OF GLASS-FIBRE PHENOLIC PREPREG COMPOSITES BY AUTOCLAVE MANUFACTURE OF GLASS-FIBRE PHENOLIC PREPREG COMPOSITES BY VACUUM BAG MANUFACTURE OF GLASS-FIBRE POLYESTER PREPREG COMPOSITES MANUFACTURE OF CARBON-FIBRE COMPOSITES BY FILAMENT WINDING MANUFACTURE OF CARBON-FIBRE COMPOSITES BY LOWPRESSURE MOULDING MANUFACTURE OF GLASS-FIBRE PHENOLIC RESIN COMPOSITES BY WET LAY-UP MANUFACTURE OF GLASS-FIBRE EPOXY PREPREG COMPOSITES BY PRESS CURING MANUFACTURE OF NON-METALLIC POLYESTER TUBING BY HEAT FORMING MANUFACTURE OF NON-METALLIC POLYCARBONATE SHEET BY HEAT FORMING INSTALLING OF FITTINGS TO NON-METALLICPOLYESTER TUBING MANUFACTURE OF NON-METALLIC POLYETHERSULPHONE SHEETBY HEAT FORMING MANUFACTURE OF ALUMINIUM SKINNED HONEYCOMB COMPOSITES ( REDUX 308 ) MANUFACTURE OF ALUMINIUM SKINNED HONEYCOMB COMPOSITES ( ARALDITE 15+1 ) MANUFACTURE OF CARBON, GLASS, OR ARAMID-FIBRE EPOXY COMPOSITES BY RESIN THE MANUFACTURE OF THERMOPLASTIC COMPOSITES BY THE LAY UP TECHNIQUE THE MANUFACTURE OF THERMOPLASTIC COMPOSITES BY THE RUBBER PRESS MOULD MANUFACTURE OF CARBON, GLASS, OR ARAMID-FIBRE EPOXY COMPOSITES BY LIQUID GENERAL INSTRUCTIONS FOR THE FABRICATION OF WROUGHT ALUMINIUM GENERAL INSTRUCTIONS FOR THE FABRICATION OF WROUGHT TITANIUM AUTOMATED DEBURRING DURING FABRICATION RECTIFICATION OF SCRATCHES ON AN ALUMINIUM CLAD SURFACE DURING FABRICATIO FABRICATION AND DEBURRING OF HOLES IN METALLIC MATERIALS RECTIFICATION OF DISTORTED ALUMINIUM DURING FABRICATION RETENTION OF BEARINGS BY EPOXY ADHESIVE RETENTION OF BEARINGS AND BUSHES BY ANAEROBIC MATERIALS RETENTION OF BEARINGS BY STAKING GENERAL INSTRUCTIONS FOR THE FABRICATION OF HIGH TENSILE STEELS RETENTION OF BEARINGS BY SWAGING GENERAL INSTRUCTIONS FOR THE FABRICATION OF COPPER BERYLLIUM SWAGING OF CABLES SWAGING OF TUBES AND CONTROL CABLES FABRICATION OF COUNTERSUNK HOLES IN METALLIC MATERIALS BY HOT DIMPLING IMPREGNATION OF ALUMINIUM AND MAGNESIUM ALLOY CASTINGS DURING FABRICATIO SCRAGGING OF HELICAL COMPRESSION SPRINGS DURING FABRICATION SWAGING OF CABLES ( TALURIT ) FABRICATION BY SUPERPLASTIC FORMING AND DIFFUSION BONDING LIMITS FOR MACHINING FEATURES LASER CUTTING

Airbus Specification / Nadcap commodity Cross Table issued June 1st, 2010

Page 7 of 21

Airbus specification family ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP

Airbus Specification Reference ABP6-4220 ABP6-4221 ABP6-5222 ABP6-5223 ABP6-5224 ABP6-5225 ABP6-5226 ABP6-5227 ABP6-5228 ABP6-5229 ABP6-5230 ABP6-5231 ABP6-5232 ABP6-5233 ABP6-5346 ABP7-1234 ABP7-1235 ABP7-1236 ABP7-1237 ABP7-1238 ABP7-1239 ABP7-1240 ABP7-1241 ABP7-1242 ABP7-1243 ABP7-1244 ABP7-1245 ABP7-1246 ABP7-1247 ABP7-1248 ABP7-1249 ABP7-1250 ABP7-1251 ABP7-1252 ABP7-1253 ABP7-1254 ABP7-1330 ABP7-1342 ABP7-1362 ABP7-2255 ABP7-2256 ABP7-2359 ABP7-3258 ABP7-3259 ABP7-3260 ABP7-3261 ABP7-4262 ABP7-4263 ABP7-4266 ABP7-5267 ABP7-5268 ABP7-5269 ABP7-5270 ABP7-5271 ABP7-5272 ABP7-5273 ABP7-5274 ABP7-5275 ABP7-6276 ABP7-6277 ABP7-6278 ABP7-6279 ABP7-7280 ABP7-7281 ABP7-8282 ABP7-8283 ABP7-8284 ABP7-8285 ABP7-8286 ABP7-9287 ABP7-9288 ABP7-9289 ABP8-1290 ABP8-1291 ABP8-1293 ABP8-1294 ABP8-1296 ABP8-1354 ABP8-2297 ABP8-2298 ABP8-2299 ABP8-2300 ABP8-2301 ABP8-2302 ABP8-2303 ABP8-3304 ABP8-3306 ABP8-4309 ABP9-1311 ABP9-1312 ABP9-1313 ABP9-1314 ABP9-1315 ABP9-1316

Last Revision date or Issue 1 3 4 1 4 5-1 3 2-1 1 3-2 9 1 5 5 2 1 2 2 2 2 3 4 2 2 2 2 6 8 2 2 2 2 2 2 2 4 3 7 3 8 4 1 2 2 2 2 2 2 4 2 3 2 3 2 3 3 2 3 2 1 2 2 7 4 2 2 2 1 2 2 3 5 10 2 4 7 3 1 3-1 2 4 2 2 3-1 2 2-2 2 4-2 2 2 3 2 1 1

Specification Designation INSTALLING OF CONDUCTIVE RFI GASKETS AND SEALS MANUFACTURE OF FORM-IN-PLACE SEALS USING SEALANT PRESSURE TESTING OF ASSEMBLED PIPES TESTING OF CLAD THICKNESS ON ALUMINIUM SHEET AND PLATE TESTING OF ALUMINIUM ALLOYS BY ELECTRICAL CONDUCTIVITY TESTING OF STEELS AFTER MACHINING BY ETCH INSPECTION HARDNESS TESTING OF METALLIC MATERIALS INSPECTION OF ALUMINIUM FORGINGS INSPECTION OF TITANIUM FORGINGS Testing By Magnetic Particle Flaw Detection TESTING BY PENETRANT FLAW DETECTION TESTING OF ALUMINIUM SKINNED HONEYCOMB BONDING FORDIS-BONDING TESTING BY ULTRASONIC FLAW DETECTION TESTING COMPOSITES BY ULTRASONIC FLAW DETECTION TESTING BY RADIOGRAPHY ASSEMBLY OF COAXIAL CONTACTS ( ARINC 404A AND 600 ) ASSEMBLY AND WIRING OF FIRE RESISTANT BULKHEAD SEALS ( NSA 934502 - 13 ) ASSEMBLY OF CABLE TO PRESSURE SEALS ASSEMBLY OF FIRE SEALS ASSEMBLY OF PRESSURE SEALS WITH SEALANT FILLING ASSEMBLY OF RACEWAYS AND CABLE LOOMS INTO RACEWAYS ASSEMBLY OF HEAT SHRINKABLE MOULDED PARTS ASSEMBLY OF COMPONENTS TO PRINTED CIRCUIT BOARDS ASSEMBLY OF CABLE TO PRESSURE SEALS ( HELLERMAN DEUTSCH ) ASSEMBLY AND HANDLING OF STATIC SENSITIVE DEVICES ASSEMBLY AND LINING OF METALLIC CONDUITS FOR ELECTRICAL CABLE ELECTRICAL BONDING AND EARTHING FOR AIRBUS REQUIREMENTS DURING ASSEMBLY ELECTRICAL BONDING AND EARTHING FOR AIRBUS REQUIREMENTS DURING ASSEMBLY REPAIR OF PRINTED CIRCUIT BOARDS BY REMOVAL AND REPLACEMENT OF COMPONE ASSEMBLY AND MANUFACTURE OF PRINTED CIRCUIT BOARDS REPAIR OF KAPTON INSULATED PTFE WRAPPED CABLE ASSEMBLY AND POTTING OF ELECTRICAL COMPONENTS WITH SEALANT ASSEMBLY AND FITTING OF NYLON AND P.T.F.E GROMMETS (FLEXIFORM) ELECTRICAL ASSEMBLY BY SOLDERING ASSEMBLY AND MANUFACTURE USING WIRE-WRAP METHODS TORQUE TIGHTENING OF ELECTRICAL CONNECTIONS AND COMPONENTS DURING ASSE ASSEMBLY OF CABLE BUNDLES THROUGH A PRESSURE BUNG (ABS0834 ) LOCAL REFERENCE DOCUMENT (CONTACT / CRIMP TOOL / LOCATOR & PROCESS) A330/340 WING-TIP HARNESS ASSEMBLY INSTRUCTIONS STRIPPING OF ELECTRICAL WIRING AND CABLE STRIPPING OF ELECTRICAL WIRING (FE0300 & W-200A STRIPPING TOOLS) AUTO-CUTTING MACHINE CRIMPING OF CONTACTS ( AMP MATE-N-LOK ) CRIMPING OF CONTACTS ( TRI-STAR PORTA TAC ) CRIMPING OF POST INSULATED TERMINALS AND IN-LINE SPLICES CONTROL OF HAND CRIMPING TOOLS CRIMPING OF CONTACTS ( RAYCHEM TERMINATION MTC ) SOLDERING OF CONTACTS (RAYCHEM TERMINATION MTC) CRIMPING OF CABLE TERMINATION ( AMP ) ASSEMBLY OF CABLE TO MINIATURE CONNECTORS ( AMPHENOL ) ASSEMBLY OF CABLE TO CONNECTORS ( NAS 1599 ) ASSEMBLY OF CABLE TO HIGH TEMPERATURE CONNECTORS ASSEMBLY OF CIRCULAR CONNECTORS ASSEMBLY OF CO-AXIAL CONNECTORS ( BNC - TNC - C - N AND HN ) ASSEMBLY OF CONNECTORS ( FENWAL ) ASSEMBLY OF RECTANGULAR CONNECTORS ASSEMBLY OF CABLE TO CONNECTORS (CANNON CA-KE) ASSEMBLY AND MOUNTING OF CONNECTORS ON FUEL TANKS IDENTIFICATION OF WIRING WITH PRINTED CODES ( TAB AND KINGSLEY ) IDENTIFICATION OF WIRING WITH PRINTED CODES (KINGSLEY A23T) IDENTIFICATION OF WIRING WITH UV PRINTED CODES ( BAE EXIMARK ) IDENTIFICATION OF WIRING WITH RUBBER SLEEVES, AND INSTALLATION FITTING OF HEAT SHRINK SLEEVES SOLDER SLEEVES AND EDGING STRIP SOLDERING PRINTING OF SLEEVES AND NON-METALLIC LABELS ( THERMO-FIT TMS ) INSTALLATION OF SPIRAL BINDING FOR LOOMS ASEMBLY AND CONNECTION OF RAIL MOUNTED MODULE / TERMINAL BLOCKS AND REL INSTALLATION OF CABLE TIES ( INSULOK ) INSTALLATION OF CABLE TIES ( TY-RAP ) INSTALLATION OF CABLE TIES ( PANDUIT ) TESTING AND CHECKING OF LOOMS TESTING AND CHECKING OF CRIMPING TOOLS CABLE HANDLING STOWAGE AND STORAGE CLEANING AND DEGREASING OF METALLIC MATERIALS (ALKALINE) CLEANING OF ALUMINIUM ALLOYS AFTER BRAZING CLEANING OF PIPES SOLVENT CLEANING AND DEGREASING OF MATERIALS DEOXIDATION OF ALUMINIUM ALLOYS LOCAL CLEANING AND DEGREASING USING AQUEOUS CLEANERS PICKLING OF ALUMINIUM ALLOYS AS A PRE-TREATMENT PICKLING OF STAINLESS STEELS AND NICKEL ALLOYS PICKLING OF TITANIUM ALLOYS PICKLING OF COPPER ALLOYS PICKLING OF ALUMINIUM ALLOYS FOR METAL REMOVAL ANODIC PICKLING OF STEELS PICKLING OF ALUMINIUM ALLOYS ( ALMECO 100 ) CHEMICAL CONTOURING OF ALUMINIUM ALLOYS CHEMICAL CONTOURING OF TITANIUM ANS ITS ALLOYS MASKANTS FOR CHEMICAL CONTOURING AND CHEMICAL TREATMENTS MARKING BY IMPRESS STAMPING MARKING BY MACHINE ENGRAVING MARKING BY CONTROLLED TIP VIBRO ENGRAVING MARKING BY SHARP TIP VIBRO ENGRAVING MARKING BY RAISED AND INSET METHODS MARKING BY IMPRESS STAMPING ( BORRIES )

Nadcap Commodity out out out out HT out MTL NDT NDT NDT NDT NDT NDT NDT NDT out out out out out out out ETG out out out out out ETG ETG out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out CP WELD CP CP CP CP CP CP CP CP CP CP CP CP CP CP out out out out out out

Audit Criteria out out out out AC7102/2 out AC7101/5 AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/2 / AC7114/2S AC7114 / AC7114/1 / AC7114/1S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/4 / AC7114/4S out out out out out out out AC7120 out out out out out AC7120 AC7119 out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out AC7108 AC7110 / AC7110/1 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 out out out out out out

Airbus Specification / Nadcap commodity Cross Table issued June 1st, 2010

Page 8 of 21

Airbus specification family ABP ABP ABP ABP ABP ABP ABP ABP ABP ABP ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET

Airbus Specification Reference ABP9-1363 ABP9-2317 ABP9-2318 ABP9-2319 ABP9-2320 ABP9-3321 ABP9-3322 ABP9-3323 ABP9-4324 ABP9-4325 ADET0000 ADET0001 ADET0002 ADET0003 ADET0004 ADET0007 ADET0008 ADET0009 ADET0010 ADET0012 ADET0013 ADET0015 ADET0016 ADET0018 ADET0019 ADET0020 ADET0021 ADET0022 ADET0024 ADET0025 ADET0026 ADET0027 ADET0028 ADET0029 ADET0030 ADET0031 ADET0032 ADET0033 ADET0034 ADET0035 ADET0036 ADET0037 ADET0038 ADET0039 ADET0040 ADET0044 ADET0045 ADET0047 ADET0049 ADET0051 ADET0052 ADET0053 ADET0054 ADET0055 ADET0056 ADET0057 ADET0058 ADET0059 ADET0060 ADET0061 ADET0062 ADET0063 ADET0064 ADET0065 ADET0066 ADET0067 ADET0070 ADET0071 ADET0072 ADET0073 ADET0074 ADET0075 ADET0076 ADET0077 ADET0078 ADET0079 ADET0080 ADET0081 ADET0082 ADET0083 ADET0084 ADET0085 ADET0086 ADET0087 ADET0088 ADET0089 ADET0090 ADET0091 ADET0092 ADET0093 ADET0094 ADET0095 ADET0096 ADET0097

Last Revision date or Issue 1 4 1 1 6 1-1 2 6 4 4 G AX A A F D C A A G D B E E D L E D E E B L C F M D A G C C B B A C I H B A J B B F D G F C A D A C A A C A C C C J N D F F C C F E B C L A D E E C D D D H F H C G J E

Specification Designation

Nadcap Commodity out out out out out out out out out out out out out out out out out out CP CP out out out SE out out out out out out out CP out out out out out out out out CP out CP CP CP out out out CP out SE CP out SE out out out out COMP out out out out out CP CP COMP CP CP CP WELD out out out out CP SE CP out out CP out out out out out out CP CP out CP out COMP CP

Audit Criteria out out out out out out out out out out out out out out out out out out AC7108 AC7108 out out out AC7117 / AC7117/3 / AC7117/5 out out out out out out out AC7108 out out out out out out out out AC7108 out AC7108 AC7108 AC7108 out out out AC7108 out AC7117 / AC7117/3 / AC7117/5 AC7108 out AC7117 / AC7117/3 out out out out AC7118 MB out out out out out AC7108 AC7108 AC7118 MB AC7108 AC7108 AC7108 AC7110 / AC7110/5 out out out out AC7108 AC7110 / AC7110/4 AC7108 out out AC7108 out out out out out out AC7108 AC7108 out AC7108 out AC7118 PAR AC7108

MARKING OF METALLIC LABELS/INFORMATION PLACARDS BY MARKTRONIC INDENTATIO MARKING BY SELF ADHESIVE LABELS MARKING BY BAG AND LABELS MARKING BY METAL TAG LABELS MANUFACTURING AND APPLICATION OF PHOTOSENSITIVE MARKING LABELS ELECTRO - CHEMICAL MARKING INK MARKING ( BLEED THROUGH ) INK MARKING GENERAL CONTROL OF MARKING SPECIFICATIONS PROTECTION OF MARKING BY THE APPLICATION OF POLYURETHANE PAINTS AS OVERC Etablissement, gestion et application des dossiers d exigences techniques Repertoire general des dossiers d exigences techniques Aluminium alloy 2024 thick plates condition T 351 Aluminium alloy 7075 thick plates condition T651 Classification et suivi des ensembles et elements composites carbone / resine et aramide / resin Assemblages tenon / mortaise de structures composites Billes de grenaillage en ceramique Metallisation de trous de fixations pour la voilure carbone ATR72 Application de peinture antiderapante interieur avion Specification de procede - protection a base d aluminium pour fixations Specification lubrification de la boulonnerie a l alcool cetylique Corps de bielles retreintes en alliage d aluminium pour utilisation en systemes Cables souples equipes d embouts sertis Grenaillage de precontrainte des alliages d aluminium (Replaced by AIPS02-02-004) For light alloy cylindrical body rods Expansion a froid des alesages dans les alliages d aluminium corroyes Specification technique d approvisionnement des tubes roules et soudes en TA6V pour batis AT Specification technique d approvisionnement et de qualification des bielles metalliques de structu Ecrous ordinaires pour vis a filetage court a empreinte en creux cote filetage Pose des fixations sur mastic intercalaire non polymerise Decoration des panneaux stratifies par film decoratif PVF Chromage dur par depot electrolytique rectifie sur pieces en acier et alliages de nickel Specification pour essais de qualification timbres et rubans de fixation ( Type auto-agripant ) pou Montage des boulons cylindriques de cisaillement Couples de serrage de la boulonnerie structurale Finition des pieces en alliages d aluminium ( ebavurage, cassage d angle ou rayonnage ) Pose er protection des etiquettes d identification en zone skydrol Scellements des bagues roulements rotules Realisation de vis et d axes filetes dans nos ateliers Materiaux equivalents pour boulonnerie Caracterisation de la teinte de finition blanche Rotules standards auto lubrifiees Lustrages des peintures exterieures avion Sechage accelere des peintures Retouches de protection anti-corrosion interieur avion Marquage des surfaces exterieures avion A-S7G06-T6 haute qualite ebauches coulees en sable et basse pression Specification de procede - protection pour elements de fixation en acier allie en remplacement de Usinage chimique des alliages d aluminium IVD aluminium des aciers inoxydables et alliages de titane Grenaillage de precontrainte des metaux durs (Replaced by AIPS02-02-004) Harmonisation des etats de surfaces des elements en composites peints hors amenagement com Specification technique d approvisionnement bielles a corps cylindrique en fibres de carbone Formage et conformage par grenaillage des materiaux metalliques Detourage et percage laser des materiaux metalliques durs (Replaced by AIPS03-09-001) Cintrage a chaud des tubes en titane Ressorts en acier au carbone acier inoxydable et bronze au berylium Controle apres pose des boulons des fixations permanents et demontables Metallisation d elements composites par depots metalliques Thermoformage des thermoplastiques Vis a Filetage Court a Empreinte en Creux Cote Filetage Ecrous a gorge de rupture calibree pour vis a filetage court a empreinte en creux cote filetage Formage superplastique des alliages d aluminium Fixations utilisables en alternative dans le cas de pose automatique ou robotisee Preparation de surface exterieure avant peinture finale Characterisation de la teinte de finition gris BAC 707 Traitement de surface et collage metal-metal structural des pieces en 2204 et 2024 plaque Peinture des pieces elementaires metalliques Oxydation anodique chromique des alliages d aluminium Cadmiage electrolytique des aciers non inoxydables Soudage generalites ( tous materiaux) Revetement anti-usure ( type carbure de tungstene ) pour aciers, alliages d aluminium et alliages Surepaisseurs d approvisionnement pour toles en alliages d aluminium Montage des boulons cylindriques permanents avec interference Rivetages structuraux Traitment par chromatation des alliages d aluminium Flap peening Phosphatation des aciers non inoxydables ( R<1450 MPa ) Application des mastics Arasage des fixations Oxydation anodique sulfurique du titane et de ses alliages ( sauf fixations ) Montage des boulons de traction Marquage a l encre des pieces elementaires Eprouvettes et methodologie d essais utilisees pour la qualification des materiaux metalliques Qualification du 2024 T 351 sous forme de toles epaisses Qualification du 2024 T3 sous forme de toles minces, plaquees ou non plaquees, a structure fibr Qualification de 2024 T3 sous forme de toles minces, plaquees ou non plaquees a structure enti Oxydation anodique sulfurique des alliages d aluminium Peinture des pieces elementaires en composite ( hors amenagement commercial ) Tuyauterie pour conditionnement d air Application locale au tampon d oxydation anodique des alliages d aluminium Assemblage avec interposition de resine Structure type plancher composite carbone Oxydation anodique dure des alliages d aluminium corroyes

Airbus Specification / Nadcap commodity Cross Table issued June 1st, 2010

Page 9 of 21

Airbus specification family ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET

Airbus Specification Reference ADET0098 ADET0099 ADET0100 ADET0101 ADET0102 ADET0103 ADET0104 ADET0105 ADET0106 ADET0107 ADET0108 ADET0109 ADET0110 ADET0111 ADET0112 ADET0113 ADET0114 ADET0115 ADET0116 ADET0117 ADET0118 ADET0119 ADET0120 ADET0121 ADET0122 ADET0123 ADET0124 ADET0125 ADET0126 ADET0127 ADET0128 ADET0130 ADET0132 ADET0133 ADET0134 ADET0135 ADET0142 ADET0143 ADET0144 ADET0145 ADET0146 ADET0147 ADET0148 ADET0149 ADET0150 ADET0151 ADET0152 ADET0153 ADET0154 ADET0155 ADET0156 ADET0157 ADET0158 ADET0159 ADET0160 ADET0161 ADET0162 ADET0163 ADET0164 ADET0165 ADET0166 ADET0167 ADET0168 ADET0169 ADET0170 ADET0171 ADET0172 ADET0173 ADET0174 ADET0175 ADET0177 ADET0178 ADET0180 ADET0181 ADET0183 ADET0184 ADET0185 ADET0187 ADET0188 ADET0190 ADET0191 ADET0193 ADET0194 ADET0196 ADET0201 ADET0202 ADET0203 ADET0204 ADET0205 ADET0207 ADET0208 ADET0209 ADET0211 ADET0212

Last Revision date or Issue A B C D D E D A F C C C C C C C C D B E G C I D C D A C B B D F F C D B C B B B B B B D D E A B C B C B F C C C B B D E B D C D B C A C D C A A C A B A A A D B D D F C C C B C C A B B A A

Specification Designation

Nadcap Commodity out COMP out out out out out NDT CP out out out out out out COMP out CP CP out out out COMP CP out out out out CP CP out COMP out out out out out out out out out CP COMP CP COMP COMP out out out out out out out out CP out out CP out out out CP COMP out out out out out COMP CP COMP COMP out out out COMP COMP out out out out out out out out WELD WELD WELD WELD WELD WELD WELD COMP COMP

Audit Criteria out AC7118 MB out out out out out AC7114 / AC7114/3 / AC7114/3S AC7108 out out out out out out AC7118 PAR out AC7108 AC7108 out out out AC7118 PAR AC7108 out out out out AC7108 AC7108 out AC7118 PAR out out out out out out out out out AC7108 AC7118 AC7108 AC7118 PAR AC7118 PAR + CP out out out out out out out out AC7108 out out AC7108 out out out AC7108 AC7118 PAR out out out out out AC7118 LRP + CP AC7108 AC7118 PAR AC7118 PAR out out out AC7118 PAR AC7118 PAR out out out out out out out out AC7110 / AC7110/4 AC7110 / AC7110/5 AC7110 / AC7110/6 AC7110 / AC7110/3 AC7110 / AC7110/1 AC7110 / AC7110/5 AC7110 / AC7110/4 AC7118 LRP AC7118 PAR

Rilsanisation des alliages d aluminium Traitement de surface et collage du titane et de ses alliages ( sur eux-memes ou sur composites Mise en ceuvre de vis autotaraudeuses Qualification du 7475 T7351 sous forme de toles epaisses Qualification du 7050 T7451 sous forme de toles epaisses Qualification du 2024 T3510 et T3511 sous forme de profiles files Qualification du 7075 T6511 sous forme de profiles files Controle par ultrasons renforce pour ebauches en materiaux metalliques corroyes Reparations des defauts de surface sur les revetements exterieurs avion en alliages d aluminium Qualification du 2124 T351 sous forme de toles epaisses Qualification du 7175 T7351 sous forme de toles epaisses Qualification du 7010 T651 sous forme de toles epaisses Qualification du 7010 et 7150 T 6511 sous forme de profiles files Qualification du 7075 PL T 6 sous forme de toles minces Qualification du 7475 PL T 761 sous forme de toles minces Etageres composites pour meubles electriques Procedes de metallisation Peinture exterieure au stade final d assemblage avion Decapage de peinture des pieces elementaires par projection de particules plastiques et remise Sertissage des elements d extremite Couples de serrage sur materials electriques Rivets en 2017 posables sur etat de livraison Realisation d elements composites monolithiques en preimpregnes carbone resine epoxy 180°C Peinture exterieure anti-erosion des pieces en composite Denudage des cables electriques Marquage des cables electriques Exigences techniques sur cables fibre optique Insertion et extraction des contacts amovibles dans les elements de connexion electrique Techn Retouche par oxydation anodique au tampon type 2 ( 12 microns ) des alliages d aluminium corro Nitruration ionique des aciers faiblement allies Collage de bague titane au niveau des embouts de bielles composite carbone Collage structural d elements composites monolithiques et/ou sandwich en preimpregnes carbon Specification d approvisionnement pour les rotules d articulation du train avant de l A330/340 Specification d approvisionnement pour les rotules d articulation de l atterrisseur central de l A33 Montage des fixations aveugles Fourniture de rivets pleins Contamination huile IDG Insertion et extraction des contacts amovibles dans les elements de connexion electrique techno Qualification du 7075 T 73510 et T 73511 sous forme de profiles files Qualification du 7075 T 76510 et T 76511 sous forme de profiles files Reglage des portes passagers sur tous Airbus Nickelage + Cadmiage au tampon des alliages d aluminium Mise en ceuvre de preimpegnes a base de resine phenolique renforcee de fibres longues Peintures sur composites realises a base de resine phenolique renforcee de fibres longues Realisation d elements composites en preimpregnes tissu hybride verre carbone ou tissu aramid Densification de nid d abeilles non metallique pour application structurale Detourage par electro-erosion a fil des materiaux metalliques durs Identification des cables et harnais electriques Marquage electrolytique Marquage au vibrograveur Immobilisation en translation des axes des charnieres MS 20001 Reprise de blindage sur les cables electriques Specification d approvisionnement pour les roulements etanches a rouleaux double rangee des a Installation des plaques de protection seuil de porte Usinage chimique des alliages de titane Formage superplastique des alliages de titane Marquage a la frappe controlee Argenture electrolytique des aciers inoxydables et alliages de cuivre Finition des pieces en metaux durs ( ebavurage, cassage d angle ou ryonnage ) Regles de fabrication des harnais Controle de forme de toles minces usinees Cadmiage au tampon des aciers Formage a chaud d elements composites en preimpregnes carbone resine epoxy 180°C Regles d installation des harnais electriques sur avion Procede d essais de conductibilite electrique et de foudre sur assemblages par fiaxtions Marquage par laser CO2 des materiaux metalliques durs Marges de tolerance sur installation electrique Emmanchement des bagues montees serrees Mise en ceuvre de composites a matrice epoxyde par procede RTM ( resin transfer moulding ) Retouche de protection par chromatation sur alliages d aluminium Percage, alesage, fraisurage, des composites carbone ou des empilages composites carbone / m Percage, alesage, fraisurage des composites ou des empilages avec composites aramid, verre, Protection des aciers par projection a chaud d aluminium Marquage laser sur tuyauterie rigide hydraulique Reparations sur tube de bati ATR sur avion en compagnie Fraisage et detourage des composites carbone Fraisage et detourage des composites aramide, verre et hybrides verre-carbone Montage humide de fixations Montage des boulons coniques Taperlok Criteres de suivi du fluide hydraulique NSA307110 sur avion avant livraison Montage des roulements, rotules et bagues par sertissage Tests electriques et optiques des cablages avions ( Hors essais fonctionnels ) Protection par nitrure de titane (TIN) des alliages de nickel, aciers inoxydables et alliages de titan Formage et conformage par galetage des alliages d aluminium Installation de bagues dans des alesage de chapes metalliques par procede d expansion BushLo Soudage par resistance par points ou a la molette Sodage TIG ( Tungsten Inert Gas ) Soudage par faisceaux laser sur metaux durs Soudage par faisceau d electrons du titane et de ses alliages Procedes manuels de soudage arc avec electrode enrobee et oxyacetylenique, de brasage et de Soudage par fusion cone arriere T 19 A330/340 Soudage par resistance cone arriere T 19 A330/340 Mise en oeuvre de composites a matrice phenolique par le procede RTM ( resin transfer mouldin Repertoire des defauts types d usinage de composites polymerises

Airbus Specification / Nadcap commodity Cross Table issued June 1st, 2010

Page 10 of 21

Airbus specification family ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET ADET AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS

Airbus Specification Reference ADET0213 ADET0214 ADET0215 ADET0216 ADET0218 ADET0220 ADET0221 ADET0223 ADET0224 ADET0227 ADET0228 ADET0229 ADET0231 ADET0233 ADET0234 ADET0235 ADET0236 ADET0237 ADET0239 ADET0240 ADET0241 ADET0242 ADET0243 ADET0244 ADET0245 ADET0247 ADET0251 ADET0252 ADET0253 ADET0255 ADET0256 ADET0261 ADET0262 ADET0263 ADET0264 ADET0265 ADET0268 ADET0269 AIPS00-00-001 AIPS00-00-002 AIPS00-00-003 AIPS00-00-005 AIPS00-00-006 AIPS01-00-001 AIPS01-01-004 AIPS01-01-005 AIPS01-01-006 AIPS01-01-007 AIPS01-01-008 AIPS01-02-002 AIPS01-02-003 AIPS01-02-003-01 AIPS01-02-005 AIPS01-02-005-01 AIPS01-02-006 AIPS01-02-008 AIPS01-02-012 AIPS01-02-013 AIPS01-02-014 AIPS01-02-015 AIPS01-02-016 AIPS01-02-017 AIPS01-02-019 AIPS01-02-022 AIPS01-02-025 AIPS01-03-001 AIPS01-03-002 AIPS01-03-003 AIPS01-03-004 AIPS01-03-005 AIPS01-04-001 AIPS01-04-004 AIPS01-04-008 AIPS01-04-011 AIPS01-04-012 AIPS01-04-013 AIPS01-04-014 AIPS01-04-015 AIPS01-04-016 AIPS01-04-017 AIPS01-04-018 AIPS02-01-001 AIPS02-01-002 AIPS02-01-003 AIPS02-01-004 AIPS02-01-005 AIPS02-02-001 AIPS02-02-002 AIPS02-02-003 AIPS02-02-004 AIPS02-02-005 AIPS02-02-006 AIPS02-02-008 AIPS02-02-010

Last Revision date or Issue C A A A B A B B B B C A A B C A B D B A A A A A A A A A B C C A A A A A A A 2 2 2 1 5 1 1 1 1 1 1 2 4 2 5 2 2 2 1 1 2 1 3 2 2 2 2006-08 2 3 2 2 2 2 3 3 2 1 2 2 1 2 2 1 2 3 1 1 1 2 1 1 4 1 2 1 1

Specification Designation Pliage de composites monolithiques a base de resine thermoplastique pour amenagement comm Mise en oevre de plaques thermoplastiques a fibres continues pour structure monolithique Pose des rubans d identification sur tuyauteries Pilage de composites sandwich a base de resine thermodurcissable pour amenagement comme Decapage chimique des peintures exterieures avion et remise en peinture Mise en oeuvre de thermoplastiques injects Fabrication de panneaux sandwich thermoplastique pour amenagement commercial Detourage final des toles minces en alliages d aluminium Criteries d acceptation des defauts pieces de fonderie detectes par ressuage Procede d acceptation des defauts detectes par ressuage sur les produits matrice ou forges Procede d acceptation des defauts detectes par ressuage sur les pieces issues de demi-produits Cnitrage de tubes hydrauliques Formage des collets par procede eckold Application du revetement barriere d etancheite aux vapeurs de carburant Decapage chimique des peintures sur pieces elementaires en alliages d aluminium Procedures de nettoyage des elements electriques normalises Densification de nid d abeille pour applications amenagement commercial Formage et conformage par flexion 3 points des materiaux metalliques Formage a chaud du titane et de ses alliages Peinture antistatique des pieces elementaires en composite Formage par etirage du tissu metallique Bobinage de fil carbone impregne sur wire-mesh pour structure acoustique Collage d un revetement resistif sur nid d abeille avec adhesif reticule Mise en oeuvre de l ancrage du nid d abeille non metallique Marquage par micro usinage Mise en oeuvre des films intumescents sur structure sandwich ( carbone resine epoxy 180°C / ni Usinage par fraisage des pieces en alliage d aluminium Assemblage structural de preformes fibreuses Realisation d elements composites sandwich nid d abeilles non metallique / preimpregnes carbo Consolidation de plaques thermoplastiques Soudage par faisceaux laser sur alliage d aluminium Realisation d elements composites sandwich ame en mousse / peaux en preimpregnes carbone Reparation par soudage tig manuel sur pieces de tolerie Rectification des materiaux metalliques durs CONSTITUTION DE BANDES SANDWICH ACOUSTIQUES POUR ENTREE D'AIR ASSEMBLAGE DE BANDES SANDWICH ACOUSTIQUES POUR ENTREE D'AIR Passivation des aciers inoxydables martensitiques et austenitiques Marquage a la frappe controlle Introduction Structure of AIRBUS INDUSTRIE process specifications Numbering system Index of approved replacement specifications Reference-List Airbus Process Specifications and Instructions Approved alternative standard parts for fastening Installation of Solid Rivets Installation of Solid Rivets (For applications in the programs WB, SA, LR, A380 and A400M that a Installation of Solid Rivets (For applications in the programs WB, SA, LR, A380 and A400M tha Installation of Solid Rivets and Slug (For applications in the programs WB, SA, LR, A380 and A4 Installation of Solid Rivets (For applications in the programs WB, SA, LR, A380 and A400M that Installation of Taper Shank Bolts Preparation of holes in metallic materials for fastening Orbital Drilling for metallic materials Preparation of holes in Fibre Reinforced Plastic (FRP) and Hybrid Materials Orbital Drilling for non-metallic materials Airbus Industrie Process Specification Installation of Lockbolts Pull and Stump types Airbus Process Specification Torque tightening of screws, bolts and nuts Machining and Assembly of GLARE Parts/ Components Installation of blind bolts Pull-type Installation of cold expanded retainers Installation of Blind Bolts Threaded type Installation of rivetless nutplates General assembly and installation of fasteners Installation of bushes, shrink and press fit Installation of parallel shank threaded fasteners Installation of ASNA2705 Rivet Installation of cold expansion bushes into non metallic materials Manual fastening of 2- or 4- start quick release fasteners with or without acres sleeves Installation of inserts in non metallics Installation of Helicoil Threaded Inserts Installation of metallic inserts (Acres sleeves) General requirements for welding and allied processes Resistance Welding Tungsten Inert Gas (TIG) Welding of Metallic Materials Electron beam welding of hard metal Resistance welding of thermoplastic materials Laser Beam Welding of Hard Metals Friction Stir Welding of Aluminium Alloys Welding of thermoplastic parts Laser Beam Welding of of Aluminium Alloys in T-Joint Configurations Brazing of Metallic Materials Plasma Arc Welding (PAW) of Metallic Materials Chromic acid anodizing of aluminium alloys Sulphuric acid anodizing of aluminium alloys Tartaric Sulphuric Anodising of aluminium alloys for corrosion protection and paint pretreatment. Anodizing of Titanium and its alloys Hard Anodizing of aluminium alloys Shot peening forming of metal parts Sablage sec Wet blasting Shot peening for fatigue enhancement of metal parts Cold Expansion in Metallic Materials - Split Sleeve Process Cold Expansion in Metallics - Split Mandrel Process Decorative Brushing Installation of bushes by cold expansion process in metallic materials

Nadcap Commodity out out out out CP out out out NDT NDT NDT out out out CP out COMP out out CP out out COMP COMP out COMP out COMP COMP out WELD COMP WELD out COMP out CP out out out out out out out out out out out out out out out COMP out out out out out out out out out out out out out out COMP out COMP WELD WELD WELD WELD out WELD out out WELD WELD WELD CP CP CP CP CP SE CP CP SE out out out out

Audit Criteria out out out out AC7108 out out out AC7114 / AC7114/1 / AC7114/1S AC7114 / AC7114/1 / AC7114/1S AC7114 / AC7114/1 / AC7114/1S out out out AC7108 out AC7118 CP out out AC7108 out out AC7118 PAR AC7118 PAR + CP out AC7118 PAR + CP out AC7118 LRP AC7118 PAR + CP out AC7110/6 AC7118 PAR + CP AC7110 / AC7110/5 out AC7118 PAR out AC7108 out out out out out out out out out out out out out out out AC7118 PAR out out out out out out out out out out out out out out AC7118 PAR out AC7118 PAR AC7110 AC7110 / AC7110/4 AC7110 / AC7110/5 AC7110 / AC7110/3 out AC7110 / AC7110/6 out out AC7110 / AC7110/6 AC7110 / AC7110/1 AC7110/5 AC7108 AC7108 AC7108 AC7108 AC7108 AC7117 / AC7117/3 AC7108 AC7108 AC7117 / AC7117/3 / AC7117/5 out out out out

Airbus Specification / Nadcap commodity Cross Table issued June 1st, 2010

Page 11 of 21

Airbus specification family AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS

Airbus Specification Reference AIPS02-02-011 AIPS02-02-013 AIPS02-03-001 AIPS02-03-002 AIPS02-03-003 AIPS02-03-004 AIPS02-03-005 AIPS02-03-006 AIPS02-03-007 AIPS02-04-001 AIPS02-04-002 AIPS02-04-004 AIPS02-04-005 AIPS02-04-006 AIPS02-04-007 AIPS02-04-008 AIPS02-04-009 AIPS02-04-010 AIPS02-04-011 AIPS02-05-001 AIPS02-05-003 AIPS02-05-004 AIPS03-01-001 AIPS03-01-003 AIPS03-01-010 AIPS03-01-011 AIPS03-01-012 AIPS03-01-013 AIPS03-01-015 AIPS03-02-001 AIPS03-02-007 AIPS03-02-008 AIPS03-02-009 AIPS03-02-010 AIPS03-02-011 AIPS03-02-012 AIPS03-02-017 AIPS03-02-018 AIPS03-02-019 AIPS03-02-020 AIPS03-02-021 AIPS03-02-022 AIPS03-03-001 AIPS03-03-002 AIPS03-03-005 AIPS03-03-006 AIPS03-03-009 AIPS03-03-010 AIPS03-03-012 AIPS03-03-013 AIPS03-06-001 AIPS03-06-002 AIPS03-06-003 AIPS03-06-004 AIPS03-06-006 AIPS03-06-007 AIPS03-06-008 AIPS03-06-009 AIPS03-06-010 AIPS03-06-011 AIPS03-06-014 AIPS03-06-015 AIPS03-06-016 AIPS03-06-017 AIPS03-07-002 AIPS03-07-004 AIPS03-07-007 AIPS03-07-018 AIPS03-07-019 AIPS03-07-021 AIPS03-07-023 AIPS03-07-024 AIPS03-07-026 AIPS03-07-027 AIPS03-08-003 AIPS03-09-001 AIPS03-09-002 AIPS03-09-003 AIPS03-09-004 AIPS03-10-001 AIPS03-10-002 AIPS03-10-003 AIPS03-10-004 AIPS03-10-005 AIPS03-10-006 AIPS03-10-007 AIPS03-10-008 AIPS03-10-011 AIPS03-11-001 AIPS03-11-002 AIPS03-11-003 AIPS04-00-000 AIPS04-00-004 AIPS04-01-001

Last Revision date or Issue 1 1 1 1 1 1 1 1 1 2 3 5 3 2 2 1 2 2 1 1 1 1 2 2 2 1 1 2 1 2 1 1 1 1 1 2 1 2 4 1 1 3 4 1 2 3 1 1 2 1 1 1 2 2 2 3 4 2 1 1 2 5 1 2 4 4 2 1 4 1 1 1 1 1 1 2 1 1 1 2 2 2 1 2 1 1 3 1 2 2 2 1 2 3

Specification Designation Laser shock peening of metal parts Thermochemical treatment of steels by nitriding Application of thermal spray coatings WC-Co and WC-Co-Cr Copper alloy coating of titanium and stainless steel alloys by thermal spraying Physical Vapor Deposition of titanium nitride for coating of nickel alloys, stainless steels and titan Deposition of Aluminium by the Thermal Spray Process Deposition of Zinc by the Thermal Spray Process Ion Vapour Deposition (IVD) of Aluminium Application of thermally sprayed Cobalt Chromium Molybdenum coatings Application of corrosion preventive temporary protective compounds Electrolytic cadmium plating Hard Chromium Plating of Steels Hard Chromium Plating of Steels for High Corrosion Resistance Electrolytic Zinc-Nickel plating WC-C:H coating by Physical Vapour Deposition Electroless (Chemical) Nickel - Phosphorus Plating Application of Corrosion Inhibiting Solid Film Lubricant Pad cadmium plating of steels Electroless (chemical) Nickel Phosphorus ¿ PTFE duplex coating Chemical conversion coating Passivation of martensitic and austenitic stainless steel Phosphating of Steel Piping GAMAH-system Assembly and installation of Janitrol couplings Manufacturing of pipes Internal roller swaged pipe couplings External swaging of fittings on 5 080 psi titanium tubes External swaging of sleeves on 5 080 psi titanium tubes Blanking of pipes, hoses and components Manufacturing of structural fibre reinforced plastic (FRP) components, general specifications Removal of decorative sheet materials for furnishings and components used in aircraft interiors Thermoforming of thermoplastic sheet materials The manufacture of composite components by the resin transfer moulding process The manufacture of thermoplastic material parts by the injection molding process The manufacture of thermoplastic composite components by the lay up technique Rubber press moulding of fibre reinforced thermoplastic sheet Preforming by using binder coated textiles Manufacture of Structural Sandwich Parts with Thermosetting Fiber Reinforced Skins Manufacture of Monolithic Parts with Thermoset Prepreg Materials Manufacturing of monolithic parts with thermoplastic material The Manufacture of Thermoplastic material parts by the Injection molding process Manufacture of Monolithic and Sandwich Structural Components by Impregnation of Dry Reinforc Rework of scratches in Aluminium and Aluminium alloys on external surfaces Embrevement Realisation d epanouis et de bourrelets sur tuyauteries rigides Water Jet Cutting Installation of axial-swaged fittings for oxygen system Application of textile floor covering Installation of bearing, spherical bearing and bushes by swaging External swaged pipe sockets Installation des plaques de protection pour seuils de portes et pour PHR Freinage par rondelles freins Freinage par fit frein Locking using anaerobic materials Internal expander swaged pipe couplings External swaged pipe couplings Installation of rigid hydraulic pipes and flexible hoses Shimming for Assembly Installation of oxygen pipes Installation of O-rings in fuel pipes Locking by Split pin Torque Tightening of A380 hydraulic connections Installation of ring locked plug in union Installation of structural metallic rods Machining of Fibre Reinforced Plastic (FRP) Components Manufacture, Installation and Rework of Insulation Blankets Manufacturing of structural components from thermosetting prepreg materials In-situ foaming of components for non-structural parts Hot-forming of Thermoset Prepreg Materials Preparation of dry fiber preforms for infusion & injection techniques Manufacture of Sandwich Parts with Thermosetting Fibre Reinforced Skins for interior applicatio Manufacture of fibre reinforced monolithic parts with thermosetting prepreg material for interior a Filling and splicing of sandwich panel honeycomb cores for interior parts Cutting of Composites located inside the pressurized fuselage (e.g. interior) Rework of Composite Monolithic and Sandwich Parts Découpe laser des matériaux Laser cutting of aluminium and aluminium alloys Shear-cutting of metallic sheets and sections Electrical Discharge Machining of Hard Metals Rectification of metallic materials by shot peening Rectification of metallic materials by roll forming Rectification of metallic materials by 3 point bending Age Forming of Aluminium Alloys Forming of Aluminium alloys - General requirements Forming of Joggles in Aluminium alloys Superplastic forming of aluminium alloys Superplastic Forming of Titanium Alloys Hard metal forming - General requirements Machining of Metallics Precision Grinding Deburring and manual rework of metallic components Heat treatment of metallic materials - General Heat treatment of steels Heat treatment of aluminium alloys parts

Nadcap Commodity out HT out out out out out out out CP CP CP CP CP out CP CP CP out CP CP CP out out out out out out out COMP out out COMP out out out out COMP COMP out out COMP CP out out out out out out out CP out out out out out out out out out out out out out COMP out COMP out COMP COMP COMP COMP COMP out COMP out out out out SE out out out out out out out out out out out HT HT HT

Audit Criteria out AC7102 / AC7102/4 out out out out out out out AC7108 AC7108 AC7108 AC7108 AC7108 out AC7108 AC7108 AC7108 out AC7108 AC7108 AC7108 out out out out out out out AC7118 PAR out out AC7118 LRP out out out out AC7118 PAR + CP AC7118 PAR out out AC7118 LRP + CP AC7108 out out out out out out out AC7108 out out out out out out out out out out out out out AC7118 PAR out AC7118 PAR + CP out AC7118 PAR AC7118 LRP AC7118 PAR AC7118 PAR AC7118 CP out AC7118 out out out out AC7117 / AC7117/3 out out out out out out out out out out out AC7102 AC7102 AC7102 / AC7102/2

Airbus Specification / Nadcap commodity Cross Table issued June 1st, 2010

Page 12 of 21

Airbus specification family AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS

Airbus Specification Reference AIPS04-01-002 AIPS04-02-001 AIPS04-03-001 AIPS04-03-002 AIPS04-04-001 AIPS05-01-001 AIPS05-02-002 AIPS05-02-003 AIPS05-02-006 AIPS05-02-007 AIPS05-02-008 AIPS05-02-009 AIPS05-02-010 AIPS05-02-011 AIPS05-02-012 AIPS05-02-013 AIPS05-02-014 AIPS05-02-015 AIPS05-02-016 AIPS05-03-001 AIPS05-03-005 AIPS05-03-006 AIPS05-04-002 AIPS05-04-003 AIPS05-04-004 AIPS05-04-005 AIPS05-05-001 AIPS05-05-003 AIPS05-05-004 AIPS05-05-005 AIPS05-05-006 AIPS05-05-007 AIPS05-05-008 AIPS05-05-009 AIPS05-06-001 AIPS06-01-002 AIPS06-01-003 AIPS06-01-004 AIPS06-01-005 AIPS06-01-006 AIPS06-01-007 AIPS06-02-002 AIPS06-02-003 AIPS06-02-005 AIPS06-02-006 AIPS06-02-007 AIPS07-00-001 AIPS07-00-002 AIPS07-01-001 AIPS07-01-002 AIPS07-01-003 AIPS07-01-004 AIPS07-01-006 AIPS07-01-007 AIPS07-01-009 AIPS07-01-011 AIPS07-01-012 AIPS07-01-013 AIPS07-01-014 AIPS07-01-015 AIPS07-01-017 AIPS07-01-018 AIPS07-02-002 AIPS07-02-005 AIPS07-02-006 AIPS07-02-008 AIPS07-02-009 AIPS07-03-001 AIPS07-03-002 AIPS07-03-003 AIPS07-04-002 AIPS07-04-003 AIPS07-04-004 AIPS07-04-005 AIPS07-04-006 AIPS07-04-007 AIPS07-04-009 AIPS07-04-010 AIPS07-04-011 AIPS07-04-012 AIPS07-04-013 AIPS07-04-014 AIPS07-04-015 AIPS07-04-016 AIPS07-04-017 AIPS07-04-019 AIPS07-04-021 AIPS07-04-023 AIPS07-04-024 AIPS07-04-026 AIPS07-04-028 AIPS07-04-031 AIPS07-05-002 AIPS07-05-003

Last Revision date or Issue 3 3 1 2 1 2 1 2 2 1 1 3 1 2 1 1 1 1 1 1 1 1 1 1 1 2 1 1 3 1 1 1 1 1 1 1 2 1 1 1 1 3 2 2 3 2 3 1 5 1 4 3 1 3 1 2 1 4 2 3 3 1 3 1 1 1 4 2 2 1 2 3 6 4 3 3 2 3 2 1 2 2 1 3 1 1 1 4 3 2 3 2 1 1

Specification Designation

Nadcap Commodity HT HT HT HT HT CP CP CP CP out out CP CP CP CP CP CP CP out CP CP out out out CP out out out out out out out out out out out out out out out out out out COMP COMP COMP out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out

Audit Criteria AC7102 AC7102 AC7102 AC7102 AC7102 AC7108 AC7108 AC7108 AC7108 out out AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 out AC7108 AC7108 out out out AC7108 out out out out out out out out out out out out out out out out out out AC7118 MB AC7118 PAR AC7118 MB out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out

Heat treatment of solid rivets Heat treatment of titanium and titanium alloys Heat Treatment of Steels Stress Relieve of Steels Heat treatment of nickel alloy parts Application of basic primer Application of anti-static paints on composite parts Application of external paint systems Application of Decorative Interior Paint Removal of paint from furnishing and components used in aircraft interiors Application of in mould coating for decorative interior parts Application of structural paints Application of decorative film coating Rework of paints on metallic and nonmetallic structural parts Powder coating of metallic parts Application of anti-erosion paint Application of fuel vapour barrier coating Application of Antislip Emergency/Walkway Paint Application of Decorative Sheet Material Paint stripping by plastic media blasting Chemical stripping of aircraft external paint system and repainting Coating removal by means of a laser-technique for preparation of Electrical Bonding Connections Repair schemes to achieve surface status requirements on composite components Cosmetic rework by cold cure adhesive Application of Meltable Corrosion Preventive Compound Application of Gap Filler - Easy to Remove Sealing of aircraft structure Surface protection of fasteners and sealants by application of varnish Wet installation of fasteners Process for the manufacture of form-in-place seals using sealant Application of non hardening jointing compounds Application of Sealant Impregnated Foam Application of low adhesion sealants Preservation of Cut Edges of Carbon Fibre Composite Parts to prevent Galvanic Corrosion on at Application of decorative films for aircraft exterior Surface Preparation for Thermoplastic composites before structural bonding Surface Preparation for Thermosetting parts before structural bonding Mechanical surface preparation of non-structural adherends prior to adhesive bonding Etching of polyamide adherends prior to adhesive bonding Priming of polyamide adherends prior to adhesive bonding Etching of fluoropolymer adherends prior to adhesive bonding Non-structural adhesive bonding Bonding of GLARE® Parts Structural Bonding of Fiber Metal Laminates (FML) Manufacturing of Metallic Sandwich Parts - Bonding process Structural Bonding of Thermoset and Thermoplastic Matrices Composite Parts Bonding Metal / Metal Parts Structural Bonding Process Approved interchangable Standard parts for electrical components Catalogue of electrical AIPS Manufacturing and installation of cable harnesses General requirements for the insertion and extraction of removable contacts in electrical connect Cable tying with NSA935401 or NSA8420 Tightening procedures for electrical equipment Electrical bonding Shielding pick-up with solder sleeves ASNE0160 and ABS0237 Attachment of cables in backshells of connectors Lightning protection for electrical cables Shielded overbraiding of electrical harnesses for A340-500/600 Program Shielded over braiding of electrical harnesses developed for A380 PROGRAM Shielded lightweight conduits, Manufacturing and Production assembly instructions, For electrica Modification and repair of harness protection components Assembly process of adhesive bonded brackets Assembly of a coaxial cable XF on two DR24 cables, using solder sleeve E0160 and splice E054 Preparation of special cable ends Installation of coaxial connector ASNE 0294 Installation of connector NSA 938925 Installation of connectors ASNE 0111 and ASNE 0233 General requirements for the stripping of electrical single conductor cables DR and AD series General requirements for crimping of electric connections Crimping procedure with manual and hydraulic tools and with pressure generator Principle of use of manual crimping tools M22520/1-01 replacing MS 3191 M22520/2-01 replacin Installation of socket contacts for relay bases Installation of Terminals NSA 936501TA Installation of Splices NSA 936809 Installation of terminals NSA936507TG Installation of Butt Splices ASNE 0360 Installation of caps NSA 936601 and NSA 936604 Installation of terminal ASNE 0422 TR onto aluminium cable Installation of terminal ASNE 0466 TS onto aluminium cable Installation of splice, Butt type, NSA 936813RH on Aluminium/Aluminium or Copper / Aluminium Installation of terminals ASNE 0223 TL for aluminium cable Installation of contacts Installation of pin contacts Installation of flat terminals ASNE0256 Installation of eye terminals NSA 936505 Installation of flat terminals ABS 0374 Installation of flat terminals ABS 0909 Installation of eye terminals NSA 936503 TD General requirements for the crimping of 24 to 12 size aluminium electrical cables ABS0949 ( AD General requirements for the crimping of 10 to 04 size aluminium electrical cables ABS0949 AD Manufacturing of bonding lead assemblies ASNE0088/0089/0090/0091/0092 and ABS0394, ABS Installation of twinax contacts ABS1111 and ABS1112 General requirements for the crimping of 24 to 12 size aluminium electrical cables ABS0949 (AD Installation of rectangular rack connectors ASNE 0086 / ASNE 0145 / ASNE 0146 / ASNE 0147 Installation of rack connectors

Airbus Specification / Nadcap commodity Cross Table issued June 1st, 2010

Page 13 of 21

Airbus specification family AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS AIPS

Airbus Specification Reference AIPS07-05-004 AIPS07-05-005 AIPS07-05-006 AIPS07-05-007 AIPS07-05-008 AIPS07-05-009 AIPS07-05-010 AIPS07-05-011 AIPS07-05-012 AIPS07-05-013 AIPS07-05-014 AIPS07-05-015 AIPS07-05-016 AIPS07-05-017 AIPS07-05-018 AIPS07-05-019 AIPS07-05-020 AIPS07-05-021 AIPS07-05-022 AIPS07-05-023 AIPS07-05-024 AIPS07-05-025 AIPS07-05-026 AIPS07-05-027 AIPS07-05-028 AIPS07-05-029 AIPS07-05-030 AIPS07-05-032 AIPS07-05-033 AIPS07-05-034 AIPS07-05-035 AIPS07-05-038 AIPS07-05-039 AIPS07-05-040 AIPS07-05-041 AIPS07-05-042 AIPS07-05-043 AIPS07-05-045 AIPS07-05-046 AIPS07-05-047 AIPS07-05-048 AIPS07-05-050 AIPS07-05-051 AIPS07-05-053 AIPS07-05-054 AIPS07-05-056 AIPS07-05-062 AIPS07-05-070 AIPS07-05-072 AIPS07-06-001 AIPS07-06-002 AIPS07-06-003 AIPS07-06-004 AIPS07-06-006 AIPS07-06-007 AIPS07-07-001 AIPS07-07-002 AIPS07-07-004 AIPS07-09-002 AIPS07-10-001 AIPS07-11-001 AIPS07-11-002 AIPS07-11-003 AIPS07-11-004 AIPS07-11-005 AIPS07-11-006 AIPS07-11-007 AIPS08-01-001 AIPS08-01-002 AIPS08-01-003 AIPS08-01-006 AIPS08-02-002 AIPS08-02-003 AIPS08-02-005 AIPS08-03-001 AIPS08-03-002 AIPS08-04-001 AIPS08-04-005 AIPS09-01-001 AIPS09-01-002 AIPS09-01-003 AIPS09-01-006 AIPS09-01-007 AIPS09-01-008 AIPS09-01-009 AIPS09-01-010 AIPS09-01-011 AIPS09-01-012 AIPS09-01-013 AIPS09-01-014 AIPS09-02-003 AIPS09-02-004 AIPS09-02-005 AIPS09-03-001

Last Revision date or Issue 1 3 3 1 2 2 2 1 1 1 1 1 2 2 1 2 1 2 2 2 2 2 1 1 1 1 2 3 1 1 1 1 1 1 2 2 1 2 2 1 1 1 1 1 1 1 2 1 1 3 2 2 1 1 1 2 6 2 1 1 3 1 2 1 1 3 1 1 2 1 1 1 1 1 2 2 2 1 2 3 2 2 4 2 2 2 2 2 2 1 2005-01-17 2005-01-26 2 1

Specification Designation

Nadcap Commodity out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out CP CP CP out CP CP CP out CP CP CP CP CP CP CP CP

Audit Criteria out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out AC7108 AC7108 AC7108 out AC7108 AC7108 AC7108 out AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108

Installation of grounding modules ASNE 0425 Assembly and connection of rail mounted terminal modules NSA937901 Installation of rectangular connectors ASNE 0390 or EN 3545 Installation of seal bundle NSA 934710 Installation of indicator lights ASNE 0415 in sleeves ASNE 0416 Installation of base fitted indicator lights Installation of connectors Installation of connectors EN 6047-003/004 (ASNE0098 and ASNE 0378) and contacts EN 3155 Installation of coaxial connector "BNC" type NSA 938601 Installation of coaxial connector "TNC" type NSA 938621 Installation of coaxial connector N type NSA 938641 Installation of coaxial connector C type NSA 938661 Installation of "BNC" type coaxial connectors ASNE 0460 Installation of "TNC" type coaxial connectors ASNE 0461 Installation of "N" type coaxial connectors ASNE 0462 Installation of "C" type coaxial connectors ASNE 0463 Installation of coaxial connector ASNE 0295 and grounding with terminal ASNE 0296 Installation of connectors ASNE 0077 ASNE 0079 ASNE 0110 Installation of connectors: ASNE 0684 (replacingNSA 938027), ASNE 0734 (replacing NSA 9380 Installation of electrical connectors ASNE 0093 and ASNE 0094 Installation of connectors ASNE 0076 ASNE 0150 Installation of plug connector ASNE 0511 Installation of connectors ABS 0364 Installation of connectors Installation of diodes and resistors on connector NSA 938361 Installation of connectors NSA 938361 and ASNE 0362 Installation of connectors ASNE 0087 and ASNE 0097 Installation of connectors EN 2997 Installation of female contactsw ASNE 0078 Installation of rectangular connector ASNE 0237 and ASNE 0302 Installation of coaxial connectors NSA 938603, NSA 938604, NSA 938608 Installation of coaxial special contact ABS 0714 NSA 938171 and NSA 938400 ASNE 0172 and A Installation of pressure seals ASNE0073 Installation of pressure seals ABS 0122 Installation of connectors D-Subminiature ABS 0713 and ABS 1145 Installation of cable brackets and supports Installation of quadrax contacts ABS0973 and ABS0974 Installation of conductive backshell for D-Sub miniature connector, ABS1069 Assembly process of pressure seal ABS1378 Fitting of metallic clamp strips ASNE0805 Installation of ground power receptacle ABS1336 and ASNE0232 Assembly and connection of terminal blocks General requirements for installation of components for BUS CAN Installation of Quick-Release-Connector ABS1152 Installation of ABS 1138 EMI-Backshells Installation of Exit-Sign-Connector ABS1239 Assembly process for pressure seals ABS1571 Installation of sealed LED light indicator ABS1436 Installation of LED illuminated pushbutton switches Laser cable marking with UV or CO 2 process Identification and marking of electrical installations Printing on electrical cables by hot stamping Sleeves NSA937201 Labels ASNE0248 and ASNE0470 NSA937201, Installation of pre-printed self-adhesive index strips to circuit breaker panels Installation and protection of ABS0724, NSA9117 and ABS0970 labels. Installation of heat shrink tubing and sleeves Flexible textile sheaths EN6049-003 to EN6049-009, ASNE0559 and ABS0596 for protection of e Drainage of conduits NSA935805, NSA935806, ASNE0432 and ABS0887 Electrical and optical tests of aircraft wiring ( Functional tests excluded ) Brazing of electrical connections Manufacturing and installation of optical fibre cables Termination of ABS0929-003 and ABS0929-004 singleway optical connector onto ABSO963-003 Installation of ABS1379-003 optical contact Assembly of ABS1906 optical contact on ABS0963 type LF optical cable Testing of optical links after contact termination Fibre optic technology ¿ Cleaning methods Fibre optic installations ¿ Fault diagnosis Marquage par frappe controlee Marking by Vibro-Engraving Marquage a la frappe controlee Marking of metallic materials by micro milling Installation of identification labels in hydraulic fluid areas Identification by bag and tag Marking for external aircraft surfaces Electrochemical Marking Permanent marking with ink CO2 laser marking of hard metallic parts (Titanium and titanium alloys, steels an Inconel 625) Laser beam marking of hard metals Cleaning with liquid non aqueous agents in vapour phase Cleaning with liquid non aqueous agents Cleaning with aqueous cleaning agents Cleaning of Aircraft Cockpits and Cabin Interiors Cleaning of Aircraft Structural Plastic Transparencies Ultrasoni degreasing Emulsion Cleaning Cleaning of pipes with liquid non aqueous agents Alkaline degreasing Electrolytic degreasing Final cleaning and drying of metallic oxygen pipes, fittings and other components of oxygen syste Final cleaning of hydraulic pipes

Acid pickling of aluminium alloys Alkaline etching (Al-Alloys)

Pickling of Titanium and its alloys Chemical milling of aluminium and aluminium alloys

Airbus Specification / Nadcap commodity Cross Table issued June 1st, 2010

Page 14 of 21

Airbus specification family AIPS AIPS AIPS AIPS AIPS AIPS AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM AITM I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D

Airbus Specification Reference AIPS09-03-002 AIPS09-04-001 AIPS09-05-001 AIPS98-02-001 AIPS98-02-002 AIPS98-02-003 AITM 1-0060 AITM1-0002 AITM1-0005 AITM1-0007 AITM1-0009 AITM1-0010 AITM1-0019 AITM1-0042 AITM1-0043 AITM6-0011 AITM6-0012 AITM6-0013 AITM6-0015 AITM6-1001 AITM6-2001 AITM6-4001 AITM6-4002 AITM6-4004 AITM6-4005 AITM6-4008 AITM6-4011 AITM6-4012 AITM6-4013 AITM6-4014 AITM6-5001 AITM6-5002 AITM6-5003 AITM6-6002 AITM6-6003 AITM6-6004 AITM6-6005 AITM6-6006 AITM6-7002 AITM6-7003 AITM6-7005 AITM6-9003 I+D-E-026 I+D-E-031 I+D-E-051 I+D-E-127 I+D-E-128 I+D-E-136 I+D-E-137 I+D-E-138 I+D-E-139 I+D-E-140 I+D-E-275 I+D-E-280 I+D-E-282 I+D-E-290 I+D-E-292 I+D-E-293 I+D-E-294 I+D-E-295 I+D-E-296 I+D-E-303 I+D-E-325 I+D-E-326 I+D-E-336 I+D-E-352 I+D-E-379 I+D-E-383 I+D-F-015 I+D-P-006 I+D-P-009 I+D-P-032 I+D-P-033 I+D-P-034 I+D-P-035 I+D-P-036 I+D-P-037 I+D-P-038 I+D-P-040 I+D-P-046 I+D-P-047 I+D-P-048 I+D-P-049 I+D-P-050 I+D-P-052 I+D-P-053 I+D-P-054 I+D-P-055 I+D-P-056 I+D-P-058 I+D-P-059 I+D-P-060 I+D-P-061 I+D-P-062

Last Revision date or Issue 1 1 2 1 1 1 1 1 2 3 3 3 2 1 1 5 4 3 2 4 2 6 3 7 7 1 2 3 2 3 2 2 1 2 1 1 1 3 3 2005-03-02 3 2 1984-10-24 1984-10-26 1984-12-18 1979-11-19 1990-01-15 2007-11-06 / C 2009-07-09 / D2 2009-05-06 / C1 1991-11-28 / A 2009-03-09 / 3F 2007-06-05 / D 2010-04-13 / B 1999-06-30 / B 1990-07-26 1990-07-10 1990-07-10 2000-06-30 / A 2009-05-13 / C12 2007-01-19 / C 2007-01-03 / A 1998-02-10 / A 1997-11-14 / A 1998-10-03 / B 1992-12-21 1996-10-24 2007-01-10 / A 2007-02 / 3 2008-04-11 / F 2009-04-14 / E 2009-04-22 / B 2009-07-30 / A 1976-05-24 1977-11-02 1979-06-17 1978-03-02 2009-10-06 / C2 1981-12-23 / A 2009-03-27 / B 2009-07-29 / B 1979-02-05 1993-04-01 1975-09-29 1991-05-27 / A 2009-11-23 / A 1987-05-22 / A 1981-04-22 / A 1979-11-26 / A 1979-02-05 2007-02-08 / B 2007-01-10 / C 2006-08 / C 1982-06-25

Specification Designation Chemical milling of titanium alloys Surface preparation prior to external paint application Activating of FRP-surfaces by means of a laser-technique for subsequent paint application Application of Phosphoric Acid Anodizing (PAA) for repairs Repair of static ports Heat treatment of 2024 aluminium alloy rivets for maintenance, overhauls and repair

T-type tensile test on welded joints Fibre reinforced plasticsDetermination of In-Plane-Shear properties

Nadcap Commodity CP CP out CP out HT MTL NMMT NMMT NMMT NMMT NMMT NMMT MTL MTL NDT NDT NDT out NDT NDT NDT NDT NDT NDT NDT NDT NDT NDT NDT NDT NDT out out out HT out out NDT NDT NDT out NMMT NMMT NMMT NMMT NMMT NDT NDT NDT out HT NDT NDT NDT NMMT NMMT NMMT out NDT NDT NDT NMMT NMMT out NMMT out NDT out SE CP HT CP out out CP CP CP CP CP CP CP CP out COMP out out out out CP CP CP out out

Audit Criteria AC7108 AC7108 out AC7108 out AC7102 AC7101/3 AC7122 AC7122 AC7122 AC7122 AC7122 AC7122 AC7101/3 AC7101/3 AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S out AC7114 / AC7114/1 / AC7114/1S AC7114 / AC7114/2 / AC7114/2S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S out out out AC7102/2 out out AC7114 / AC7114/4 / AC7114/4S AC7114 / AC7114/4 / AC7114/4S AC7114 / AC7114/4 / AC7114/4S out AC7122 AC7122 AC7122 AC7122 AC7122 AC7114 / AC7114/2 / AC7114/2S AC7114 / AC7114/1 / AC7114/1S AC7114 / AC7114/4 / AC7114/4S out AC7102/2 AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7122 AC7122 AC7122 out AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/4 / AC7114/4S AC7122 AC7122 out AC7122 out AC7114 / AC7114/3 / AC7114/3S out AC7117 / AC7117/3 / AC7117/5 AC7108 AC7102 / AC7102/4 AC7108 out out AC7108 AC7108 if associated with CP AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 out AC7118 PAR + CP out out out out AC7108 AC7108 AC7108 out out

Fibre reinforced plastics Determination of interlaminar fracture toughness energy mode I Fibre reinforced plastics Determination of Open Hole tensile strength Fibre reinforced plastics Determination of Bearing strength by either pin or bolt bearing configura Fibre reinforced plastics Determination of compression strength after impact Determination of tensile lap shear strength of composite joints fatigue crack propagation on sheet material r-curve on sheet material Non destructive inspection of composite parts Reference standards for non destructive inspection methods on fiber composites Evaluation of conventional ultrasonic inspection facilities, equipments and probes Thermographic Inspection - General Penetrant testing Magnetic particles inspection Ultrasonic through transmission of Glare Laminate in squirter technique Through transmission ultrasonic inspection of CFRP and sandwich Ultrasonic testing of laser beam welded stringer-skin joints Ultrasonic pulse echo inspection of CFRP Ultrasonic inspection of friction stir welded skin to skin joints US GENERAL US pulse-echo inspection of Glass Fiber Reinforced Plastic Ultrasonic through transmission inspection in squirter technique of metal bonded parts Thickness measurement of fibre composites by UT pulse-echo technique Inspection of adhesive bonded Glare With the Fokker Bond Tester Ultrasonic Resonance Impedance Inspection using Fokker Bond Tester Tap-test Cladding thickness measurement by high frequency eddy current Eddy current for surface crack detection Determination of electrical conductivity of non-ferromagnetic materials Rotating Probe Eddy Current Inspection Coating thickness measurement Radiographic inspection-General Radiographic inspection of welded parts and components Radioscopic inspection of metallic materials by X- and gamma rays (digital radiography) Leak test for sandwich structure Ensayo de tracción sobre estratificados de fibra de carbono Ensayo de cortadura interlaminar sobre estratificados de fibra de carbono Ensayo de compresion sobre estratificados de fibra de carbono Adhesive shear test Adhesive metal / metal pekling test Magnetic particle inspection process Penetrant inspection process Radiographic inspection Crack detection through eddy currents Aluminium alloy heat treatment inspection by electric conductivity and hardness Non - destructive inspection of carbon fiber composite parts Ultrasonic pulse-echo inspection of carbon fibre composite Through - Transmission ultrasonic inspection of carbon fiber composite parts Interlaminar fracture toughness test on carbon fiber laminates Compression after impact test Inplane shear test on carbon fiber laminates Tap testing on bonded elements and / or composite structures Reference standard for non-destructive inspection of carbon fibre composites Evaluation of ultrasonic transducers Radiographic inspection of composite material structures Composite laminates bearing test on fastener joints Tension by-pass test on composite laminates with installed fastener Leak testing in sandwich structures Lap shear strength tests of adhesively bonded carbon fiber joints Measuring coating thickness on metal substrate Evaluation of ultrasonic inspection equipments and facilities

Installation of blind bolts pull type Shot peening for fatigue enhancement of metal parts

Cleaning with liquid non aqueous agents in vapour phase Steel copper - plating fir heat treatments Classification of waters for surface treatments and rinsings Dimpling for fasteners Cleaning of aluminium alloys after the dry shot peening Cleaning and protection of fluid system components Dry blasting of aeronautical components Cleaning and passivation of stainless steels and refreactory nickel and cobalt alloys Acid pickling of aluminium alloys Hard anodizing of aluminium and its alloys Chemical nickel plating Anodizing of titanium and its alloys Black oxide coatings for steels Manufacturing of plastics parts by the wet method Manufacturing of resin impregnated glass fiber reinforced plastic Repair of with reinforced plastic manufactured elements Manufacturing of parts with termoplastic materials Non structural bondings. Selection of the adhesive Manufacturing of in water soluble cores for the building of reinforced plastic parts Dry lubrication ( Molybdenum disulfide base ) Antifriction paints Paint (General specification) Liquid shims Integral fuel tank sealing and protection

Airbus Specification / Nadcap commodity Cross Table issued June 1st, 2010

Page 15 of 21

Airbus specification family I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D

Airbus Specification Reference I+D-P-064 I+D-P-065 I+D-P-067 I+D-P-068 I+D-P-070 I+D-P-071 I+D-P-072 I+D-P-074 I+D-P-075 I+D-P-076 I+D-P-077 I+D-P-078 I+D-P-090 I+D-P-091 I+D-P-093 I+D-P-094 I+D-P-095 I+D-P-098 I+D-P-106 I+D-P-107 I+D-P-109 I+D-P-110 I+D-P-111 I+D-P-112 I+D-P-114 I+D-P-115 I+D-P-117 I+D-P-119 I+D-P-131 I+D-P-134 I+D-P-143 I+D-P-146 I+D-P-147 I+D-P-148 I+D-P-152 I+D-P-157 I+D-P-176 I+D-P-177 I+D-P-178 I+D-P-181 I+D-P-182 I+D-P-184 I+D-P-186 I+D-P-187 I+D-P-188 I+D-P-193 I+D-P-196 I+D-P-199 I+D-P-202 I+D-P-206 I+D-P-207 I+D-P-209 I+D-P-212 I+D-P-213 I+D-P-216 I+D-P-217 I+D-P-218 I+D-P-220 I+D-P-222 I+D-P-225 I+D-P-226 I+D-P-229 I+D-P-230 I+D-P-231 I+D-P-233 I+D-P-236 I+D-P-237 I+D-P-238 I+D-P-249 I+D-P-250 I+D-P-251 I+D-P-263 I+D-P-264 I+D-P-309 I+D-P-310 I+D-P-312 I+D-P-313 I+D-P-314 I+D-P-315 I+D-P-317 I+D-P-319 I+D-P-320 I+D-P-321 I+D-P-324 I+D-P-329 I+D-P-330 I+D-P-331 I+D-P-333 I+D-P-337 I+D-P-342 I+D-P-347 I+D-P-348 I+D-P-356 I+D-P-358

Last Revision date or Issue 2007-01-25 / B 1979-09-24 / B 1981-03-06 1979-07-02 2007-02-20 / B 2007-02-12 / B 2009-03-05 / D 2009-07-16 / B2 1979-05-14 1980-10-29 1980-03-17 1984-04-06 / A 2007-05-24 / C 1980-02-12 1979-12-17 1979-11-09 1984-04-26 / A 1979-12-10 1986-02-05 / A 1983-03-25 1985-02-04 / A 2009-06-30 / B 1982-01-29 / A 1980-03-28 1979-06-26 2009-06-30 / C1 1981-03-24 1986-11-25 1982-05-17 / A 2006-05-18 / A 1980-10-28 2007-02 / D 1981-05-25 1981-05-27 2010-03-16 / C2 2000-07-21 / A 1987-11-23 1987-11-09 1987-12-22 2009-09-28 / B1 2007-09-03 / A 2007-03-29 / A 2007-06-18 / C 1992-09-04 1999-01-22 1985-11-18 1982-11-03 1991-04-30 / B 2009-03-27 / B 2007-11-22 / A 1991-11-15 1988-01-23 / A 2008-10-21 / B 2009-03-18 / B 1985-11-18 1987-07-14 1984-02-24 2009-09-14 / B2 1983-11-02 2009-07-15 / A2 2009-07-15 / A3 1986-01-17 2009-02-11 / B 2004-11-04 / B 2007-02-01 / D2 2007-03-07 / 4 1988-10-03 / 4 1986-01-04 1988-03-15 1992-02-19 / A 1992-01-28 / A 1989-11-23 2010-04-08 / A5 2007-03-10 / B 2009-01-14 / C 2009-03-14 / B 2007-04-26 / C 2007-04-10 / A 2009-05-05 / A 1989-11-23 1991-05-06 1990-02-05 1989-11-24 2009-02-07 / A 1990-10-15 2009-04-20 / A1 1999-04-20 / A 1991-02-05 / A 2007-05 / C 1992-06-17 / A2 1992-02-04 1991-05-23 1997-05-08 / A 2007-02-08 / C

Specification Designation Paint systems for metallic detail parts and assemblies Fixing of mechanical elements with anaerobian resins (Loctite type) Surface preparation for non-structural bondings Soft boldering of electric connections in aeronautical works Structural bondings (General specificacion) Non structural bondings (General specification) Cleaning and pickling of aluminium and its alloys Abrasive cleaning Manufacturing of stretching tools, with resins Electronic bronze platings Selective cadmium plating (by brush) Low embrittlement cadmium - titanium electrolytic platings Cleaning and pickling of titanium and titanium alloys Performance of shield clearance on shielded cables Polyamide coatings on metals (Rilsanization) Soft soldering of electric connection in avionic works Steel phosphatizing Cleaning and pickling of magnesium and its alloys Low embrittlement nickel plating (sulfamate bath) Fatigue prevention by means of wet blast (TFCH)

Low embrittlement nickel plating

Nadcap Commodity CP out out out COMP out CP CP out CP CP CP CP out out out CP CP CP out CP CP CP out CP CP out CP CP CP SE out CP CP CP CP COMP COMP COMP WELD WELD out out COMP CP out CP out CP out CP out out CP out HT HT HT HT HT HT out COMP out COMP out COMP out COMP COMP COMP out out out out out CP out CP out out out out out out COMP CP COMP CP WELD out out out CP

Audit Criteria AC7108 out out out AC7118 MB out AC7108 AC7108 out AC7108 AC7108 AC7108 AC7108 out out out AC7108 AC7108 AC7108 out AC7108 AC7108 AC7108 out AC7108 AC7108 out AC7108 AC7108 AC7108 AC7117 / AC7117/5 out AC7108 AC7108 AC7108 AC7108 AC7118 CP AC7118 PAR AC7118 MB AC7110 / AC7110/3 AC7110 / AC7110/6 out out AC7118 PAR + CP AC7108 out AC7108 out AC7108 out AC7108 out out AC7108 out AC7102/3 AC7102 / AC7102/4 AC7102 AC7102 AC7102 AC7102 out AC7118 PAR + CP out AC7118 PAR + CP out AC7118 PAR out AC7118 AC7118 PAR AC7118 PAR out out out out out AC7108 out AC7108 out out out out out out AC7118 MB AC7108 AC7118 AC7108 AC7110 out out out AC7108

Hard chromium plating Phosphoric anodizing for the structural bonding of aluminium and its alloys Previous treatment to the P.T.F.E. bonding Anodizing of magnesium and its alloys Electrolytic cadmium plating Steel and titanium Hi-Lok fasteners Cleaning and pickling non-stainless steels preparation of aluminium and its alloys for later coatings Preparation of copper and copper alloys for subsequent plating Local shotpeening by means of portable equipments Application of sealants Manual cleaning with solvents Emulsion cleaning Chemical, milling of aluminium and aluminium alloys Application of corrosion prevention primers for bonding Qualification and reception of non metallic henycomb cores Installation of shur-lok inserts in sandwich parts Qualification and reception of metallic honeycomb cores Fusion welding of metals Resistance welding of metals Barrel tumbling and vibratory finishing Sealant protection against projections of hydraulic fluids Qualification and reception of film adhesives (120 ºC cure) Application of fluorescent paints Cramping of electric connections in aeronautical and avionic works Electrolytic zinc plating Swaging of flareless tubes intended for fluid systems Chemical conversion films on aluminium and its alloys Forming, straightening and fitting of metallic parts Welded steel tubes corrosion protection system Cold working of holes Forming and straightening of aluminium and its alloys Anodizing of aluminium and aluminium alloys Conductor and cable peeling for cramping or soldering Carburizing Gaseous nitriding Heat treatments of the Aluminium alloys Heat treatments of the titanium and its alloys Heat treatment of carbon steels and alloyed steels Heat treatment of stainless and refractory steels Soldering and installation of thermocouple leads Qualification and reception of epoxy resin preimpregnated carbon fiber materials, 180°C cure Fastening of carbon fibre composite structures Manufacturing of carbon fibre composite material structures ( laminate and sandwich ) REMACHES DE TITANIO GPL Y LGPL LOCKBOLTS Manufacturing of aramide fiber composite material structures ( laminate and sandwich ) Exposure of carbon fiber/epoxy resin specimens to different chemical agents Chloroprene adhesive Z-15.101 bonding qualification and reception of epoxy resin preimpregnated glass fabrics Qualification and reception of epoxy resin preimpregnated aramide fabrics Silk screen printing of diffusion bonding inhibitors

Super plastic forming of titanium alloys

Bending of tubes for fluid systems Assembly and connection of pipes for fluid systems Swaging of permaswage sleeves on tubes intended for fluid systems Erosion resistant paint system Qualification, reception and maintenance of water base cutting fluids Chemical milling of titanium and titanium alloys Bronze coating by flame spraying Swaging of fluid systems ( Gamah, Avica and Wiggings ) Recommended holes and fittings for metric fasteners Cold working of fuel drainage holes Bonding and cementing of silicone rubber to composite materials Hot forming of aluminium alloy skins Structural bonding on phosphoric anodizing Application of heat resisting aluminized silicone paint Adhesive film qualification and reception (180 ºC cure) APPLICATION OF ANTISTATIC PAINTS ON REINFORCED PLASTICS SURFACES Orbital tube welding Funtional test of the A330 / 340 karman fairing Application of liquid release agents Blind rivets low and medium strength Painting of composite detail parts

Airbus Specification / Nadcap commodity Cross Table issued June 1st, 2010

Page 16 of 21

Airbus specification family I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D I+D IGC IGC IGC IGC IGC IGC IGC IGC IGC IGC IGC IGC IGC IGC IGC IGC IGC IGC IGC IGC IGC IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA

Airbus Specification Reference I+D-P-364 I+D-P-366 I+D-P-367 I+D-P-368 I+D-P-370 I+D-P-371 I+D-P-372 I+D-P-373 I+D-P-375 I+D-P-376 I+D-P-380 I+D-P-386 I+D-P-387 I+D-P-393 I+D-P-396 I+D-P-397 I+D-P-412 I+D-P-413 I+D-P-415 IGC04-21-111 IGC04-21-112 IGC04-24-116 IGC04-24-125 IGC04-25-100 IGC04-25-101 IGC04-25-102 IGC04-25-105 IGC04-25-106 IGC04-25-110 IGC04-25-111 IGC04-25-115 IGC04-25-116 IGC04-25-117 IGC04-25-118 IGC04-25-119 IGC04-25-120 IGC04-25-130 IGC04-63-110 IGC04-63-111 IGC04-63-140 IPDA04-01 IPDA04-02 IPDA04-03 IPDA04-04 IPDA04-05 IPDA04-06 IPDA04-07 IPDA08-01 IPDA25-01 IPDA25-02 IPDA25-03 IPDA25-04 IPDA25-05 IPDA25-07 IPDA25-08 IPDA25-09 IPDA25-11 IPDA25-12 IPDA25-13 IPDA25-14 IPDA25-15 IPDA25-17 IPDA25-18 IPDA25-19 IPDA25-20 IPDA25-21 IPDA25-22 IPDA25-23 IPDA25-24 IPDA25-25 IPDA25-26 IPDA25-27 IPDA25-28 IPDA25-29 IPDA25-30 IPDA25-31 IPDA25-32 IPDA25-33 IPDA25-34 IPDA25-35 IPDA26-01 IPDA26-02 IPDA26-03 IPDA26-04 IPDA27-01 IPDA27-02 IPDA27-03 IPDA27-04 IPDA27-05 IPDA27-06 IPDA27-07 IPDA27-08 IPDA27-09 IPDA27-10

Last Revision date or Issue 2007-11-01 2005-01-07 / 3 1995-03-22 1995-03-30 1995-05-04 1995-03-02 1996-05-17 1996-07-15 / A 2009-06-23 / B1 2006-11-30 / A 1997-04-30 2009-12-16 / C1 2007-01-22 / A 2009-12-09 / A3 2009-02-27 / A 2000-01-31 2009-01-13 / A 2009-02-01 / B 2006-11-28 2007-01 C B A D K A H A E B B B C A 1980-10-31 E 1983-11-15 B B 1979-10 A0 A2 A0 A0 A2 A2 A1 A1 A0 A2 A3 A2 A2 A2 A2 A4 A3 A5 A3 A3 A3 A2 A0 A2 A0 A3 A1 A1 A1 A2 A1 A3 A1 A0 A0 A0 A0 A0 A0 A0 A0 A0 A1 A0 A0 A0 A0 A1 A3 A0 A0 A0 A0 A0

Specification Designation Installation of light, short thread, non-metric fasteners Hi-lite / Veri-lite

Installation of bushes, shrink and press fit

Nadcap Commodity out out out out out out out out out out CP COMP COMP out out out COMP out out MTL MTL MTL MTL NDT NDT NDT NDT NDT NDT NDT NDT NDT NDT NDT NDT HT NDT HT HT HT out CP out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out NDT out NDT NDT NDT NDT NDT NDT NDT out

Audit Criteria out out out out out out out out out out AC7108 AC7118 LRP + CP AC7118 PAR out out out AC7118 PAR out out AC7101/3 AC7101/3 AC7101/3 AC7101/6 AC7114 / AC7114/1 / AC7114/1S AC7114 / AC7114/1 / AC7114/1S AC7114 / AC7114/1 / AC7114/1S AC7114 / AC7114/2 / AC7114/2S AC7114 / AC7114/2 / AC7114/2S AC7114 / AC7114/4 / AC7114/4S AC7114 / AC7114/4 / AC7114/4S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7102/2 AC7114 / AC7114/3 / AC7114/3S AC7102 AC7102 AC7102 out AC7108 out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out AC7114 / AC7114/1 / AC7114/1S out AC7114 / AC7114/1 / AC7114/1S AC7114 / AC7114/1 / AC7114/1S AC7114 / AC7114/1 / AC7114/1S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S out

Qualification and reception of aluminium foils with adhesive Qualification and reception of structural foam adhesives Swaging of fittings "Swagelok" Installation of aluminium foils for lightning ray protection Lightning and electromagnetic field electrical cable protection Wire locking of parts Thermal spray coatings Locking of parts with cotter pins Black oxide, chemical coatings on copper and copper alloys The Manufacture of composite components by the resin transfer moulding (RTM) process Machining composites Freezing, refrigeration storage and defreezing of polysulfide sealant Shielded overbraiding of electrical harnesses ( for airbus programmes ) Swaged retention of bushings, "V" groove profile REPARACION DE ESTRUCTURAS FABRICADAS CON MATERIALES COMPUESTOS (LAMINA APPLICATION OF SELF-ADHESIVE AND WITH HEAT ACTIVATED ADHESIVE LABELS APPLICATION OF TEMPORARY CORROSION PREVENTION PRODUCTS Materiaux metalliques essai de traction MATERIAUX METALLIQUES - ESSAI DE RESILIENCE FRAGILITE - FRAGILISATION SOUS TENSION MATERIAUX METALLIQUES - CORROSION SOUS CONTRAINTE - ESSAI A CHARGE CONST ELEMENTS METALLIQUES - CONTROLE PAR RESSUAGE Ressuage fluorescent produits qualifies Examens visuels sous rayonnement ultraviolet ELEMENTS METALLIQUES - CONTROLE PAR MAGNETOSCOPIE ELEMENTS METALLIQUES - CONTROLE PAR MAGNETOSCOPIE- SELECTION DE PRODUIT REGLES A SUIVRE POUR LE CONTROLE RADIOGRAPHIQUE REGLES A SUIVRE POUR LE CONTROLE RADIOSCOPIQUE CONTROLE PAR ULTRASONS DES produits ET sEMI PRODUITS METALLIQUES (épaisseur > CONTROLE PAR ULTRASONS DES EBAUCHES ET DEMI-PRODUITS EN ALUMINIUM ET ALL CONTROLE PAR ULTRASONS DES EBAUCHES ET DEMI-PRODUITS EN ACIER CONTROLE PAR ULTRASONS DES EBAUCHES ET DEMI-PRODUITS EN TITANE ET ALLIAG REGLES A SUIVRE POUR LE CONTROLE PAR ULTRASONS EN DOUBLE TRANSMISSION D Regles a suivre pour la mesure de la conductive electrique ( courants de foucault ) REGLES A SUIVRE POUR LE CONTROLE PAR ULTRASONS DES ASSEMBLAGES COLLES TRAITEMENT THERMIQUE DES ACIERS CONTROLE DES OPERATIONS ET DES PIECES TRAITEMENT THERMIQUE DES ALLIAGES D'ALUMINIUM CONTROLE DES OPERATIONS ET Controle des sels de traitement thermique NETTOYAGE EQUIPEMENTS DE PLANCHE DE BORD NETTOYAGE DES GLACES ET HUBLOTS TOUS AVIONS NETTOYAGE DES AMENAGEMENTS COMMERCIAUX DESINSECTISATION DES AVIONS NETTOYAGE EXTERIEUR AVION AVEC DETERGENT BASE AQUEUSE NETTOYAGE PAR PROCEDE CRYOGENIQUE NETTOYAGE PAR PROCEDE ENZYMATIQUE PROTECTION DES ELEMENTS EN COMPOSITE MONTAGE ET ACCOUPLEMENT DES CONNECTEURS PNEUMATIQUES INSTALL CAPT MINI SUR SURFACES EXTERNES INST THERM SDE MES SURF-40°<T°<200°C Instal° sondes temp. surface -40/+250°C INSTALLATION DE THERMOSONDES POUR MESURE DE TEMPERATURE DE SURFACE A L Instal° sonde mesure température fluides INST THERM SDE SUR AMENAGEMENT COMMERCIA Instal° thermocouple surfaces -70/+300°C INSTALLATION EXTENSOMETRIQUE : MESURES DE CONTRAINTES LOCALES PAR PONT INS EXTEN:MES DE CONTR EN TRACT COMPRESSION INS EXTEN:MES DE CONTR EN FLEX TORS-CISAILLEMENT INSTALLATION EXTENSOMETRIQUE : MESURES DE CONTRAINTES DYNAMIQUES PAR MO MES. EXTEN D'EFFORT SUR ACIER,TITANE,ALU Inst.support circul.capt.mini affleurant Protection pyrogel sur élément cyl. Montage joints raccords GG391 à 397 REMISE AU STANDARD DES AVIONS INSTRUMENTES AVEC DES JAUGES DE CONTRAINT COLLAGE ACCELERO ET CAPT DE PROXIMITE MONTAGE DES PRISES FRB SERIES HKU505/513 RACCORDEMENT DE THERMOCOUPLES DE TYPE K INS THERM COL MES DE TEMP -50 +150°C INSTAL THERMOCOUPLE SOUDE JUSQU'A 700°C Mont. faisceau pneumat syst MPS 28 voies CABLAGE CONNECT. SUB DHD15/NSA935399-413 CONNECT. ELECT.NSA938355 NSA938999-96/97 MEO câb ABS0972 sur NSA938361/938999-97 Mont faisceau pneumat syst MPS 64 voies INST.ROTOR/ARBR TOURN MESU COUPL TELEM INST SONDE TEMP SURF INT RES COMPOSITE INST PONT JAUG TYPE A INT RES COMPOSITE INST PONT JAUG TYPE C INT RES COMPOSITE INST PONT JAUG TYPE D INT RES COMPOSITE MONTAGE DES TRAVERSEES D'INSTALLATION D'ESSAIS MONTAGE DES TRAVERSEES ELECTRIQUES DEUTSCH DFR COLLAGE PAR CLICK BOND ET DEPOSE DES SUPPORTS DE CABLAGES ELECTRIQUES IE MONTAGE DES RACCORDS DOUBLE BAGUE (TYPE SWAGELOK) CRITERES D'ACCEPTATION DES DEFAUTS DETECTES PAR RESSUAGE SUR PIECES DE F VERIFICATION DIMENSIONNELLE ET SANTE DES ELEMENTS THERMODURCISSABLES EP CRITERES D'ACCEPTATION DES DEFAUTS DETECTES PAR RESSUAGE SUR LES MATRIC CRITERES D'ACCEPTATION DES DEFAUTS DETECTES PAR RESSUAGE SUR LES LAMINE MEO DU PROCEDE DE RESSUAGE FLUORESCENT PROCEDE DE CONTROLE PAR ULTRASONS - GENERALITES CONTROLE ULTRASONS MANUEL CONTROLE ULTRASONS SEMI-AUTOMATIQUE CONTROLE ULTRASONS AUTOMATIQUE CONTROLE PAR COURANTS DE FOUCAULT

Airbus Specification / Nadcap commodity Cross Table issued June 1st, 2010

Page 17 of 21

Airbus specification family IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA

Airbus Specification Reference IPDA27-12 IPDA28-01 IPDA28-02 IPDA28-04 IPDA28-05 IPDA28-06 IPDA28-07 IPDA28-08 IPDA28-09 IPDA28-10 IPDA28-11 IPDA33-01 IPDA33-02 IPDA33-03 IPDA35-01 IPDA35-02 IPDA37-04 IPDA37-05 IPDA37-06 IPDA37-08 IPDA42-00 IPDA42-01 IPDA42-02 IPDA42-03 IPDA42-04 IPDA42-05 IPDA42-06 IPDA42-07 IPDA42-08 IPDA42-09 IPDA42-10 IPDA42-11 IPDA42-12 IPDA42-14 IPDA42-15 IPDA42-16 IPDA42-18 IPDA42-19 IPDA42-20 IPDA43-01 IPDA43-06 IPDA44-01 IPDA44-02 IPDA45-01 IPDA45-03 IPDA45-04 IPDA45-08 IPDA48-00 IPDA48-01 IPDA48-02 IPDA48-03 IPDA48-04 IPDA48-05 IPDA48-12 IPDA48-13 IPDA48-17 IPDA48-25 IPDA48-26 IPDA48-27 IPDA49-01 IPDA49-03 IPDA50-01 IPDA50-05 IPDA50-06 IPDA50-07 IPDA50-08 IPDA50-09 IPDA51-04 IPDA54-01 IPDA55-01 IPDA55-02 IPDA58-01 IPDA58-02 IPDA61-01 IPDA61-03 IPDA62-02 IPDA62-03 IPDA62-06 IPDA62-07 IPDA62-08 IPDA62-09 IPDA62-11 IPDA62-12 IPDA62-13 IPDA62-14 IPDA62-15 IPDA62-16 IPDA62-18 IPDA62-19 IPDA62-20 IPDA62-21 IPDA62-23 IPDA62-25 IPDA62-27

Last Revision date or Issue A0 A1 A5 A4 A0 A1 A0 A1 A0 A0 A2 A1 A2 A1 A1 A0 A0 A2 A0 A0 A0 A2 A2 A2 A2 A0 A1 A1 A1 A1 A2 A0 A1 A0 A0 A2 A0 A2 A1 A0 A1 A2 A1 A1 A0 A3 A1 A0 A2 A0 A0 A1 A4 A4 A1 A0 A0 A2 A2 A0 A0 A1 A2 A0 A0 A0 A2 A1 A1 A0 A0 A1 A0 A4 A2 A4 A2 A1 A1 A1 A1 A0 A2 A0 A0 A1 A1 A1 A0 A0 A1 A1 A1 A1

Specification Designation

Nadcap Commodity NDT out out out out out out out out out out out out out COMP COMP COMP COMP COMP out out SE out out out out out out SE out out out out out out out out out out out out out out out out out out out COMP out out out COMP out COMP COMP COMP out out COMP COMP out out out out out out out out out out CP out HT HT CP out CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP

Audit Criteria AC7114 / AC7114/4 / AC7114/4S out out out out out out out out out out out out out AC7118 PAR AC7118 PAR AC7118 PAR AC7118 PAR AC7118 PAR out out AC7117 / AC7117/3 out out out out out out AC7117 / AC7117/3 out out out out out out out out out out out out out out out out out out out AC7118 PAR out out out AC7118 LRP out AC7118 PAR AC7118 PAR AC7118 CP out out AC7118 CP AC7118 PAR out out out out out out out out out out AC7108 out AC7102 AC7102 AC7108 out AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108

CONTROLE PAR RADIOGRAPHIE POSE DES RUBANS D'IDENTIFICATION SUR TUYAUTERIES MARQUAGE ELECTROLYTIQUE MARQUAGE A L'ENCRE MARQUAGE EXTERIEUR DES AVIONS PROTECTION DES ETIQUETTES D IDENTIFICATION EN ZONE SKYDROL MARQUAGE DES METAUX DURS AVEC UNE MACHINE LASER CO2 MARQUAGE A LA FRAPPE CONTROLEE MARQUAGE PAR VIBRO GRAVURE OU GRAVURE A L'OUTIL MARQUAGE COLLECTEURS PAR MICRO USINAGE MARQUAGE PAR MICRO PERCUSSION DETOURAGE DES METAUX DURS AVEC UNE MACHINE LASER CO2 DETOUR/PERCA.JET FLUIDE ABRASIF ALU DETOUR.PERCA JET FLUIDE COMPO. CARBONE FRAISAGE DETOURAGE DES COMPOSITES CARBONE FRAISAGE, DETOURAGE DES COMPOSITES A BASE D'ARAMIDE, VERRE ET HYBRIDES USINAGE DES COMPOSITES NON STRUCTURAUX PERCAGE, ALESAGE, FRAISURAGE DES COMPOSITES CARBONE ET DES EMPILAGES CO PERCAGE, ALESAGE, FRAISURAGE DES COMPOSITES VERRE, ARAMIDE ET HYBRIDES PERC. ORBITAL COMPO OU EMPILAGE COMPOSI GENERALITES SUR LE FORMAGE DES TOLES ET DES PROFILES EN ALLIAGE D'ALUMINIU CONFORMAGE PAR GRENAILLAGE ULTRASONS FORM PAR PROC GUERIN TOLES ALLIAGE ALU FORM A FROID PAR ETIR DES TOLES LAMINEES FORM A FRD PAR ETIR PROFIL FILE OU PLIE PLIAGE DES TOLES EN ALLIAGE D ALUMINIUM EMBREVEMENT POUR FIXATION A TETE FRAISEE ( FRAISURES A 100° ) FORMAGE DES PANNEAUX A STRUCTURE INTEGREE EN ALLIAGES D'ALUMINIUM PAR PL FORMAGE ET CONFORMAGE PAR GRENAILLAGE FORMAGE SUPERPLASTIQUE (SPF) DES ALLIAGES D'ALUMINIUM SOYAGE DES PROFILES EN ALLIAGE D'ALUMINIUM MISE A ANGLE DES PROFILES EN ALLIAGES D'ALUMINIUM FORMAGE PAR ROULAGE DES ALLIAGES D' ALUMINIUM FORMAGE A LA PINCE A RETREINDRE DES ALLIAGES D'ALUMINIUM PLANAGE DES ALLIAGES D'ALUMINIUM APRES TRAITEMENT THERMIQUE ETIRAGE DU TISSU METALLIQUE FORMAGE DES COLLETS SUR CONDUIT (PROCEDE ECKOLD) FORMAGE ET CONFORMAGE DES ALLIAGES D'ALUMINIUM PAR FLEXION 3 POINTS REDRESSAGE DES PIECES MECANIQUES EN METAUX DURS PAR FLEXION 3 POINTS FORMAGE A CHAUD DES PIECES EN TITANE ET DE SES ALLIAGES FORMAGE SUPERPLASTIQUE (SPF) DES PIECES EN TA6V CINTRAGE A CHAUD DES TITANES CINTRAGE DES TUYAUTERIES RIGIDES TOUS CIRCUITS EXPANSION A FROID DES ALESAGES ET FRAISURES DANS LES ALLIAGES D'ALUMINIUM FORMAGE ET CONFORMAGE PAR GALETAGE DES PIECES ET SOUS- ENSEMBLES EN AL REALISATION DES EPANOUIS ET BOURRELETS SUR TUYAUTERIES RIGIDES INSTALLATION DE BAGUES DANS DES ALESAGES DE CHAPES METALLIQUES PAR PROC DEFINITIONS ET ARCHITECTURE DOCUMENTAIRE DES COMPOSITES A MATRICE ORGAN REGLES GENERALES SUR LES PREIMPREGNES THERMODURCISSABLES EPOXY REPARATIONS SIMPLES D'ELEMENTS EN COMPOSITES MONOLITHIQUES REPARATION DES COMPOSITES MISE EN EUVRE DES COUPELLES NAS 1169 ET ASN-A00 CONSOLIDAT° PLAQUES THERMOPLASTIQUES MEO COMPOS A MATRICES EPOXY PAR PROC RTM ESTAMPAGE DES THERMOPLASTIQUES FORMAGE A CHAUD DES PREIMP CARB EPOXY STOCKAGE, DESTOCKAGE ET MANUTENTION DES PREIMPREGNES POUR AMENAGEMEN DENSIFICATION DE NID D'ABEILLES NON METALLIQUE POUR APPLICATION STRUCTURAL FORMAGE COMPOSITE T.P PAR POINCON VESSIE CONSOLIDATION PLAQUES T.P. SOUS PRESSE FABRICATION DU NID D ABEILLES AERONAUTIQUE EN ALLIAGE D ALUMINIUM BOBINAGE FIL CARBONE SUR WIRE MESH EBAVURAGE MANUEL DES PIECES EN ALLIAGES D ALUMINIUM UTILISATION DES HUILES DE COUPE GENERALITES USINAGE PAR ACTION MECANIQUE SUR METAUX DURS REMPLISSAGE A LA CIRE DES ALVEOLES POUR USINAGE DE LA DEUXIEME FACE DES P DECAPAGE DES OUTILS D USINAGE DES ALLIAGES D ALUMINIUM AJUSTAGE AUTOMATISE PAR USINAGE PERCAGE, ALESAGE ORBITAL MATERIAUX METALLIQUES USINAGE ALLIAGES ALUMINIUM PAR FRAISAGE AFFUTAGE DES OUTILSSPECIFIQUES A L USINAGE DES METAUX DURS RECTIFICATION DES METAUX DURS USINAGE CHIMIQUE DES ALLIAGES ALUMINIUM DETOURAGE DES METAUX DURS PAR ELECTRO-EROSION PAR FIL TRAITEMENT THERMIQUE DES ALLIAGES D ALUMINIUM TRAITEMENT THERMIQUE DES METAUX DURS OXYDATION ANODIQUE CHROMIQUE DES ALL ALU DECAPAGE ALL. ALU. ARDROX / SOCOSURF BAIN DE DEGRAISSAGE ALCALIN pH11 BAIN DE DEGRAISSAGE ALCALIN pH9

Acid pickling of aluminium alloys

BAIN DE DECAPAGE SODIQUE GENERALITES SUR LE DECAPAGECHIMIQUE TITANE UTILISATION BAIN O.A.C DES ALL ALUMINIUM UTILISATION DU BAIN DE DECAPAGE SULFOCHROMIQUE POUR LE COLLAGE DES ALLIAG DEGRAISSAGE ALCALIN pH = 14 NEUTRALISAT° DES ACIERS INOX ET INCONEL OXYDATION ANODIQUE TARTRIQUE/SULFURIQUE BAIN DE COLMATAGE APRES OXYDATION ANODIQ UTILISATION DU BAIN D ALODINE 1200 UTILISATION DU BAIN DE DEOXYDINE N° 1 CHROMATATION PAR ALODINE 1200 DES ALLIAGES D ALUMINIUM OXYDAT° ANODIQUE SULFURIQUE DES ALL ALU BAIN DE DECAPAGE FLUONITRIQUE DU TITANE DECAPAGE ACIER INOX MARTENSITIQUE

Airbus Specification / Nadcap commodity Cross Table issued June 1st, 2010

Page 18 of 21

Airbus specification family IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA

Airbus Specification Reference IPDA62-28 IPDA62-29 IPDA62-30 IPDA62-31 IPDA62-32 IPDA62-33 IPDA62-36 IPDA62-39 IPDA62-41 IPDA62-42 IPDA62-44 IPDA62-45 IPDA63-01 IPDA63-03 IPDA64-01 IPDA64-02 IPDA64-03 IPDA64-04 IPDA64-05 IPDA64-06 IPDA64-07 IPDA64-08 IPDA64-12 IPDA64-13 IPDA64-14 IPDA64-15 IPDA64-16 IPDA64-18 IPDA64-20 IPDA64-21 IPDA65-01 IPDA66-01 IPDA66-02 IPDA66-03 IPDA66-04 IPDA66-05 IPDA66-06 IPDA66-07 IPDA67-01 IPDA69-01 IPDA69-02 IPDA69-03 IPDA71-00 IPDA71-03 IPDA71-05 IPDA71-06 IPDA71-07 IPDA71-09 IPDA71-10 IPDA71-11 IPDA71-12 IPDA71-13 IPDA71-14 IPDA71-15 IPDA71-16 IPDA71-17 IPDA71-18 IPDA71-19 IPDA71-20 IPDA71-21 IPDA72-01 IPDA72-02 IPDA72-04 IPDA72-08 IPDA72-10 IPDA72-11 IPDA72-12 IPDA72-14 IPDA72-15 IPDA72-18 IPDA73-02 IPDA73-03 IPDA73-05 IPDA73-06 IPDA73-07 IPDA73-12 IPDA74-01 IPDA74-03 IPDA74-04 IPDA74-05 IPDA74-06 IPDA74-08 IPDA74-09 IPDA74-10 IPDA74-11 IPDA74-12 IPDA75-05 IPDA75-06 IPDA76-01 IPDA76-02 IPDA76-03 IPDA77-01 IPDA77-02 IPDA77-03

Last Revision date or Issue A0 A1 A3 A4 A4 A1 A1 A1 A2 A2 A2 A1 A1 A1 A2 A3 A2 A2 A1 A3 A1 A2 A4 A0 A4 A3 A0 A0 A1 A1 A0 A3 A1 A2 A2 A1 A0 A0 A1 A1 A1 A0 A0 A1 A1 A0 A3 A4 A2 A3 A2 A0 A4 A0 A5 A0 A2 A0 A2 A0 A0 A0 A4 A0 A3 A0 A1 A0 A0 A0 A2 A4 A0 A2 A1 A1 A2 A2 A0 A0 A3 A0 A0 A0 A0 A0 A2 A1 A0 A0 A0 A3 A1 A2

Specification Designation CADMIAGE AU TAMPON DES ACIERS (R <1450 MPa) UTIL BAIN PR OXYDAT° ANODIQUE SULFURIQUE RETOUCHE PROTECTION PAR CHROMATATION NETTOYAGE A L EAU CHAUDE HAUTE PRESSION UTILISAT° SOLVANTS DE NETTOYAGE A FROID DECAPAGE DES PEINTURES PAR AGENTS CHIMIQUES SUR PIECES ELEMENTAIRES EN A BAIN SULFO FLUOROFERRIQUE A FROID DEGRAISSAGE LESSIVIEL DECAPAGE CHIMIQUE PEINTURES EXTERIEURES RAYONNAGE ELECTROCHIMIQUE DES INTERSECTIONS BAIN DE DECAPAGE DES ACIERS INOX AUSTENITIQUES PASSIVATION DES METAUX DURS PROT.DES ACIERS PAR PROJ. A CHAUD D ALU. COLLAGE DE BANDES PARAFOUDRE SUR THERMODURCISSABLES/EPOXY PREPA DE SURFACE AVT PEINTURE EXT FINALE PEINTURE MANUELLE DES PIECES ELEMENTAIRES METALLIQUES PEINTURE EXTERIEURE FINALE DES AVIONS PREPARATION DE SURFACE DES COMPOSITES AVANT PEINTURE PEINTURE PIECES ELEMENTAIRES COMPOSITES APPLICATION PAR PROCEDE ELECTROSTATIQUE DES PEINTURES POLYMERISATION ACCELEREE DES PEINTURES PEINTURE PIECES D'AMENAGEMENT COMMERCIAL APPLICAT° PROD HYDROFUGE & CIRE PROTECT° RESTITUTION DE L ETANCHEITE D UNE STRUCTURE SANDWICH PAR COLLAGE D UN FIL REVETMT BARRIERE D'ETANCHE - ADAF 473-13 PROTECT° ANTI CORROSION LIGNES DE FIXAT° MISE EN PLACE DE FILMS ADHESIFS DE REDUCTION DE TRAINEE AERODYNAMIQUE (RIB APPLICATION ET ENLEVEMENT DE LA PROTECTION TEMPORAIRE EXTERIEURE AVION PREPA DE SURF Av PEINT. COMPO. THER.PLAS DECORATION EXTERIEURE AVION PAR FILM AUTO ADHESIF PROTECTION TEMPORAIRE ANTI-CORROSION DES ALLIAGES D ALUMINIUM GRENAILLAGE DE PRECONTRAINTE DES ALL ALU REP DEFAUT SUR REVETEMT EXT AVION EN ALU TRIBOFINITION DES METAUX DURS DECAPAGE PAR PROJECT PARTICULES PLASTIQUES TRIBOFINITION SUR ALLIAGES D ALUMINIUM SABLAGE A SEC DES METAUX DURS EBAVURAGE, CASSAGE D'ANGLE, RAGREAGE DES PIECES EN METAUX DURS MISE EN OEUVRE DES LUBRIFIANTS SECS UTILISATION DES EAUX RETOUCHE PROTEC ANTI-CORROS° INTERIEURES TRAITEMENT DE LA CORROSION DES ALLIAGES D ALUMINIUM SUR CELLULES AVION ASSEMBLAGES PAR FIXATIONS MECANIQUES : DEFINITIONS ET ARCHITECTURE DOCUM APPLICATION DES COUPLES DE SERRAGE DE LA BOULONNERIE STANDARD POSE DES BOULONS DE TRACTION ET DES RONDELLES P.L.I. DANS LES ASSEMBLAGES RIVETAGE AUTO STRUCTURES ALU PAR SLUG POSE FIXATIONS LOCKBOLT DANS ASSEMBLAGES DE METAUX DURS POSE FIXAT° TAPERLOK DS ASSEMBLAGE METAL POSE FIXAT° HI LITE DS ASSEMB METALLIQUE POSE FIXAT° LOCKBOLTS MATERIAUX METALLIQ RIVETAGES DES ASSEMBLAGES METALLIQUES MONTAGE DES ECROUS STA-LOK A RESSORT NSA 5063 POSE FIXATIONS AVEUGLES NAS 1919-1921 MONTAGE DES ECROUS PRISONNIERS POSE DES FIXATIONS AVEUGLES VISU LOK ET JO LOK POSE DES FIXATIONS AVEUGLES AVDEL-MBC DANS DES ASSEMBLAGES METALLIQUES POSE DES FIXATIONS HI LITE PULL STEM MONTAGE DES ECROUS STA-LOK A CLIP NSA 5454 POSE DES FIXATIONS HI-LITE PULL IN POSE FIXATION AVEUGLE ASNA0077-0078 POSE FIXATION ABS0255 DS ASSEMBL COMPOSI PSE. FIX. AV. MS21140/21141 DS ASS. COMP POSE FIXAT° HUCK COMP DS ASSEMBLAGE COMP POSE DES VIS STANDARD DS ASSEMBL COMPO POSE FIXATION NAS 1919/1921 DS COMPOSITE POSE FIXATIONS AVEUGLES ASNA 0341/0342 POSE FIXATION HILITE DANS ASSEMB. COMPO. PERCAGE ET ASSEMBLAGE DU GLARE ASSEMBL STRUCTURAL DE PREFORME FIBREUSE POSE RIVETS ABS 0056 DS ASSEMBLAGE MIXTE SOUDAGE TIG DES METAUX DURS SOUDAGE PAR RESISTANCE (point et molette) SOUD. FAISC. ELECTRONS DES METAUX DURS SOUDAGE METAUX DURS AVEC MACHINE LASER SOUDOBRASAGE AU CHALUMEAU DES ALLIAGES D ALUMINIUM BRASAGE PAR INDUCT° RACCORD TUYAUT HYDRO SCELLEMENT A FRD BAGUE-ROULEMENT-ROTULE Scellement bague titane dans composite RETICULATION D'UN ADHESIF NON SUPPORTE ASSEMBLAGE PAR COLLAGE DES COMPOSITES THERMODURCISSABLES EPOXY COLLAGE DES SUPPORTS HARNAIS ELECTRIQUES COLLAGE DES JOINTS SILICONE SUR THERMOPLASTIQUE P.E.I. PEINT COLLAGES NON STRUCTURAUX POUR AMENAGEMENT COMMERCIAL MISE EN OEUVRE RESINE DE DENSIFICATION REMPLISSAGE DE ZONES INDRAINABLES MISE EN OEUVRE DES ADHESIFS CONSTITUT° COUCHE SANDWICH ENTREE D'AIR EMMANCHEMENT DE BAGUES MONTEES SERREES MONTAGE ET SERTISSAGE DES ROULEMENTS ET DES ROTULES ASSEMB BANDE SANDWICH ACOUSTIQ ENTR.AIR M.E.O. FILM INTUMESCENT SUR STR SANDWICH REALISATI° ELEM COMP SAND NIDA NON METAL DECONGELATION - APPLICATION DES MASTICS INST PLAQUE DE PROTEC DE SEUILS DE PORTE MONTAGE DES MEMBRANES VAPOR SEAL SOUPLES

Nadcap Commodity CP CP CP CP CP CP CP CP CP out CP CP out out CP CP CP CP CP CP CP CP out out out out out out CP out out SE out out out out out out out out CP CP out out out out out out out out out out out out out out out out out out out out out out out out out out out out WELD WELD WELD WELD WELD WELD out out out out out out out out out out out out out COMP out out out out

Audit Criteria AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 out AC7108 AC7108 out out AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 AC7108 out out out out out out AC7108 out out AC7117 / AC7117/3 / AC7117/5 out out out out out out out out AC7108 AC7108 out out out out out out out out out out out out out out out out out out out out out out out out out out out out AC7110 / AC7110/5 AC7110 / AC7110/4 AC7110 / AC7110/3 AC7110 / AC7110/6 AC7110 / AC7110/1 AC7110 / AC7110/1 out out out out out out out out out out out out out AC7118 CP out out out out

Airbus Specification / Nadcap commodity Cross Table issued June 1st, 2010

Page 19 of 21

Airbus specification family IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA

Airbus Specification Reference IPDA77-04 IPDA77-06 IPDA78-01 IPDA79-02 IPDA79-04 IPDA79-05 IPDA79-06 IPDA79-07 IPDA82-01 IPDA82-02 IPDA82-03 IPDA82-04 IPDA82-05 IPDA82-06 IPDA82-07 IPDA82-10 IPDA83-01 IPDA83-02 IPDA83-03 IPDA83-04 IPDA83-05 IPDA83-06 IPDA83-07 IPDA83-08 IPDA83-09 IPDA83-10 IPDA83-100 IPDA83-101 IPDA83-102 IPDA83-103 IPDA83-104 IPDA83-105 IPDA83-106 IPDA83-108 IPDA83-11 IPDA83-12 IPDA83-13 IPDA83-14 IPDA83-15 IPDA83-16 IPDA83-17 IPDA83-18 IPDA83-19 IPDA83-20 IPDA83-21 IPDA83-22 IPDA83-23 IPDA83-24 IPDA83-25 IPDA83-26 IPDA83-27 IPDA83-28 IPDA83-29 IPDA83-30 IPDA83-31 IPDA83-32 IPDA83-33 IPDA83-34 IPDA83-35 IPDA83-36 IPDA83-37 IPDA83-38 IPDA83-39 IPDA83-40 IPDA83-41 IPDA83-42 IPDA83-43 IPDA83-44 IPDA83-45 IPDA83-46 IPDA83-47 IPDA83-48 IPDA83-49 IPDA83-50 IPDA83-51 IPDA83-52 IPDA83-53 IPDA83-54 IPDA83-55 IPDA83-56 IPDA83-57 IPDA83-58 IPDA83-59 IPDA83-60 IPDA83-61 IPDA83-62 IPDA83-63 IPDA83-64 IPDA83-65 IPDA83-66 IPDA83-67 IPDA83-68 IPDA83-69 IPDA83-70

Last Revision date or Issue A0 A3 A0 A2 A1 A0 A0 A0 A2 A0 A3 A1 A0 A0 A2 A1 A1 A3 A0 A2 A0 A0 A1 A3 A1 A2 A1 A0 A0 A0 A2 A0 A1 A0 A2 A2 A1 A4 A0 A1 A1 A2 A2 A0 A0 A1 A4 A2 A3 A2 A3 A2 A1 A4 A3 A1 A0 A2 A1 A6 A1 A1 A0 A3 A1 A1 A3 A2 A0 A0 A0 A0 A2 A1 A2 A2 A0 A2 A2 A0 A0 A0 A1 A1 A0 A2 A0 A0 A2 A2 A0 A1 A1 A1

Specification Designation REMPLISSAGE ALVEOLES DE JONCTION. PIANO PREPA-CONGEL-DISTR-CONSERV MASTIC MISE EN OEUVRE DES TIMBRES ET RUBANS AUTO-AGRIPPANTS ADHESIFS RESINE D'INTERPOSITION -CARTOUCHE DUAL UTILISATION DES RHODORSIL CAF INSTALLATION D ATTACHES RAPIDES 1/4 DE TOUR FREINAGE PAR FREIN EN TOLE FREINAGE PAR FIL FREIN SERTISSAGE PAR DUDGEONNAGE MONTAGE RACCORDS TYPE MONTAGE COMPOSANT POUR DISTRIBUT° HYDRAU SERTISSAGE PAR ELASTOMERE SERTISSAGE DES RACCORDS RYNGLOK SERTISSAGE DES BAGUES PME SERTIS RACCORD PERMASWAGE AVEC OUTIL DLT ESSAIS EN PRESSION ET DEPOLLUTION DES TUYAUTERIES FABRICATION ET INSTALLATION DES CABLAGES ELECTRIQUES FRETTAGE DES CABLES PAR NSA 935401 OU NSA 8420 CONDUITS METALLIQUES POUR CABLES ELECTRIQUES SERTISSAGE OUTILS HYDRAULIQUES MANUELS ET PAR GENERATEUR DE PRESSION PRINCIPE D UTILISATION DES PINCES A SERTIRMANUELLES : M 22520, MS 3198, MS 3191 COUPLES DE SERRAGE SUR MATERIELS ELECTRIQUES DENUDAGE DES CABLES ELECTRIQUES GAINES ET MANCHONS THERMORETRACTABLES REPRISES DE BLINDAGE PAR FERRULES MECANIQUES MEO ARRET DE BLINDAGE SUR CABLES ELECTR ASSEM. ET RACC. DES BARRETTES A BORNES M.E.O DU CONNECTEUR ABS 0057 COSSE ASNE0348 INSERTION ET EXTRACTION DES CONTACTS M.E.O. DES TRAVERSES ETANCHES ABS1378 Denudage des cables ABS0949 & EN2267 DR MEO CONT. ABS1055/1056 AVEC CABLE EN4604 MEO Connect ASNE0354 MISE A LA MASSE ET METHODE DE METALLISATION MODULE DE MISE A MASSE ASNE0425/ABS1599 GAINES TEXTILES POUR PROTECT° CABLE ELEC ASSEMBLAGE ET RACCORDEMENT DES BARRETTES A MODULES REPRISES DE BLINDAGES PAR MANCHONS AUTOSOUDEURS ASNE0720 ET NSA 937790 REPRISE DE BLINDAGE PAR MANCHON ASNE0160 DRAINAGE GAINES PLASTIQUES CONNECT RECTANGULAIRE ASNE0390 OU EN3545 IDENTIFICATION ET REPERAGE SUR INSTALLATIONS ELECTRIQUES TRAVERSEES ELECTRIQUES COMPOUNDEES NSA 934710 MARQUAGE DES CABLES ELECTRIQUES PAR FRAPPE A CHAUD DOUILLES ASNE0252 ET EN 3155-017F COSSES NSA 936501 RACCORDS CABLES NSA936808 & NSA936809 COSSES NSA 936507 RACCORDS BOUT A BOUT ASNE0360 EMBOUTS ISOLANTS NSA936601 & NSA936604 RACCORDS BOUT A BOUT NSA 936803 COSSES ASNE0422 POUR CABLE ALUMINIUM COSSES ALUMINIUM ASNE0466 POUR CABLES ALUMINIUM RACCORDS BOUT A BOUT NSA 936813 PR CABLES COSSES ASNE0223 POUR CABLES ALUMINIUM MANCHONS NSA 937201 ETIQUETTES ASNE0248 et ASNE0470 FABRICATION ET POSE ETIQUETTES D IDENT. ETIQUETTES ADHESIVES DANS NSA 931026 CONTACT EN3155-03F/08M/14M/15F/70M/71F INDIC LUMINEUX CARRES & TETES DE VOYANTS INDIC.LUM.DE CDE. ASN E0415 ET ABS0951 MONTAGE INDICATEURS LUMINEUX DE COMMANDE CONNEC ASNE0086/0145/0146/0147/0726/0729 MEO CNCTR EN3646 ASNE0052/53 & ABS1425 CONT. EN3155-016M (NSA937910) et ABS1493 CONNECT DE RACK ASNE0161/163/165 ABS0831 CONNEC EN 6047-003/004 (ASNE0098/0378) CONNECTEURS COAXIAUX TYPE BNC - NSA 938601 CONNECTEURS COAXIAUX TYPE TNC NSA 938621 CONNECTEURS COAXIAUX TYPE N NSA 938641 CONNECTEURS COAXIAUX TYPE C - NSA 938661 CONNECTEURS COAXIAUX TYPE BNC ASNE0460 CONNECTEURS COAXIAUX TYPE TNC ASNE0461 CONNECTEURS COAXIAUX TYPE N ASNE0462 CONNECTEURS COAXIAUX TYPE C ASNE0463 CONNECTEURS COAXIAUX ASNE0295 ET MISE A LA MASSE AVEC COSSE ASNE0296 CONNECTEURS ASNE0077 - ASNE0079 ET ASNE0110 CNCTR ASNE0684/734/756/NSA938026/ABS1495 CONNECTEURS ELECTRIQUES ASNE0093 ET ASNE0094 CONNECTEURS ASNE0076 ET ASNE0150 CONNECTEUR ASNE0511 CONNECTEURS ABS 0364 CONNECTEURS ASNE0186 / 0187 / 0195 / 0197 ET 0579 MISE EN OEUVRE DES DIODES ET DES RESISTANCES SUR CONNECTEUR NSA 938361 CNCTR NSA938361 ASNE0362 ABS0713 ABS1145 CONNECTEURS ASNE0087 et ASNE0097 (ANCIENNEMENT NSA 938341 et NSA 938346) NETTOYAGE CABLE ET COMPOSANT ELECTRIQUE M.E.O. CONNECTEURS EN 2997 CONTACTS FEMELLES ASNE0078 CONNECTEURS ASNE0237 ET ASNE0302 CONNECTEURS COAXIAUX NSA 938603, NSA 938604, NSA 938608 CONNECTEUR MINIATURE COAXIAL ASNE0180 COSSES PLATES TYPE CLIPS ASN-E0256

Nadcap Commodity out out out out out out out out out out out out out out out CP out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out

Audit Criteria out out out out out out out out out out out out out out out AC7108 out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out

Airbus Specification / Nadcap commodity Cross Table issued June 1st, 2010

Page 20 of 21

Airbus specification family IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA IPDA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA QVA

Airbus Specification Reference IPDA83-71 IPDA83-72 IPDA83-73 IPDA83-74 IPDA83-75 IPDA83-76 IPDA83-77 IPDA83-78 IPDA83-79 IPDA83-80 IPDA83-81 IPDA83-82 IPDA83-85 IPDA83-86 IPDA83-87 IPDA83-88 IPDA83-89 IPDA83-90 IPDA83-91 IPDA83-92 IPDA83-94 IPDA83-95 IPDA83-96 IPDA83-97 IPDA83-98 IPDA83-99 IPDA85-02 IPDA85-03 IPDA85-05 IPDA86-01 IPDA86-02 IPDA88-01 IPDA88-02 IPDA89-01 IPDA89-02 QVA-Z09-18-00 QVA-Z09-18-01 QVA-Z09-18-03 QVA-Z10-03-00 QVA-Z10-37-00 QVA-Z10-37-01 QVA-Z10-37-04 QVA-Z10-37-05 QVA-Z10-37-06 QVA-Z10-39-02 QVA-Z10-39-03 QVA-Z10-39-04 QVA-Z10-41-00 QVA-Z10-42-00 QVA-Z10-43-00 QVA-Z10-46-01 QVA-Z10-46-03 QVA-Z10-46-04 QVA-Z10-46-05 QVA-Z10-46-09 QVA-Z10-46-10 QVA-Z10-46-22 QVA-Z10-46-24 QVA-Z10-46-26 QVA-Z10-46-34 QVA-Z10-46-35 QVA-Z10-46-36 QVA-Z10-46-37 QVA-Z10-46-38 QVA-Z10-46-43 QVA-Z10-49-00 QVA-Z10-50-01 QVA-Z10-52-02 QVA-Z10-52-03 QVA-Z10-52-05 QVA-Z10-52-06 QVA-Z10-52-07 QVA-Z10-52-09 QVA-Z10-52-10 QVA-Z10-52-11 QVA-Z10-52-12 QVA-Z10-55-00 QVA-Z10-56-00 QVA-Z10-89-01 QVA-Z11-01-06 QVA-Z11-01-07 QVA-Z11-01-08

Last Revision date or Issue A0 A1 A0 A2 A1 A1 A1 A0 A0 A0 A1 A0 A0 A1 A0 A1 A1 A1 A1 A6 A0 A3 A0 A1 A1 A0 A1 A3 A0 A1 A0 A3 A0 A1 A1 2 2 3 2 3 2 2 2 2 3 4 3 3 3 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 2 3 2 4 6 4 2 2 2 2 3 2 2 2 2 2

Specification Designation COSSES DRAPEAUX NSA 936505 FIXATION CABLAGE DANS SERRE-CABLES CONNECTEUR CONNECTEURS RECTANGULAIRES ASN-E0366 COSSES PLATES MISE EN OEUVRE EXTREMITE CABLES SPECIAUX COSSES NSA 936503 COSSES A FOURCHE RECTANGULAIRE NSA 936510 CONNECTEUR COAXIAL ASN-E0294 CONNECTEURS ELECTRIQUES NSA 938925 CONNECTEURS ASN-E0007 CONNECTEURS ELECTRIQUES ASN-E0111 ET ASN-E0233 FERRULES MECANIQUES NSA 937504 BRASAGE DES CONNEXIONS ELECTRIQUES TRAVERSEES DE CLOISON ASNE0073 TRAVERSEES ELECTRIQUES COMPOUNDEES ABS 0122 MARQUAGE DES CABLES ELECTRIQUES AERONAUTIQUES PAR LASER CO2 COSSES PLATES INSTALLATION CABLE OPTIQUE CONTACT ET HARNAIS FIBRE OPTIQUE MISE EN OEUVRE DES CONTACTS QUADRAX M.E.O CONTACTS OPTIQUES ABS1379-003 M.E.O.CONT ABS1380/1381 Câb Alu #24 à 12 M.E.O.CONT ABS1380/1381 Cab Alu #10 à 04 USE OF CONTACTS ABS1344/1403 WITH # 04 to 12 Cu CABLE M.E.O. DU BUS CAN RACCORDS BOUT A BOUT ASNE 0541 SERTISSAGE DES RACCORDS POUR CIRCUITS MONTAGE DES TUYAUTERIES CARBURANT - VACUUM - CIRCUITS SECONDAIRES PRECAUTIONS A PRENDRE LORS DES TRAVAUX DANS LES RESERVOIRS CARBURANT MONTAGE TUYAUTERIE CONDITIONNEMENT D'AIR SERTISSAGE DES RACCORDS QUINSON ASNA2142 ET ASNA2373 MONTAGE TUYAUTERIES POUR CIRCUIT OXYGENE SERTISSAGE DES RACCORDS DEUTSCHLITE NETTOYAGE ET CONDITIONNEMENTDES RACCORDS DEMONTABLES IMMOBILISATION EN TRANSLATION DES AXES DES CHARNIERES Penetrant testing Penetrant testing Penetrant testing Ultrasonic Resonance Impedance Inspection using Fokker Bond Tester Tensile testing at ambient temperature Standard test method of compression testing of metallic materials at room temperature Standard test method for shear testing of aluminium alloys Standard test method for pin-type bearing test of metallic materials T-type tensile test on welded joints r-curve on sheet material Standard test method for plain strain fracture toughness of metallic materials fatigue crack propagation on sheet material Metallic materials - Brinell hardness test Metallic materials - Vickers hardness test Metallic materials - Rockwell hardness test structural adhesives, tensile single lap shear Structural adhesives, single lap shear structural adhesives metal-honeycomb- core flatwise tensile test adhesives, structural adhesives, peeling test, metal honeycomb-core, drum peel test Determination of tensile lap shear strength of composite joints galss-fibre reinforced plastics, determination of apparent interlaminar shear strength Fibre reinforced plasticsDetermination of In-Plane-Shear properties Carbon Fibre reinforced plastics, compression test parallel to fibre direction, load introduction by Tap-test carbon Fibre reinforced plastics, tensile test parallel to fibre direction carbon Fibre reinforced plastics, tensile test parallel to fibre direction carbon Fibre reinforced plastics, tensile test parallel to fibre direction Carbon Fibre reinforced plastics, compression test parallel to fibre direction, load introduction by Carbon Fibre reinforced plastics, compression test parallel to fibre direction, load introduction by Fibre reinforced plastics Determination of interlaminar fracture toughness energy mode I Magnetic particles inspection Determination of electrical conductivity of non-ferromagnetic materials Ultrasonic Resonance Impedance Inspection using Fokker Bond Tester Ultrasonic inspection of Ti 3Al 2,5V seamless tubing for hydraulic systems, cold worked and stres Reference standards for non destructive inspection methods on fiber composites Reference standards for non destructive inspection methods on fiber composites Reference standards for non destructive inspection methods on fiber composites Ultrasonic testing of laser beam welded stringer-skin joints Reference standards for non destructive inspection methods on fiber composites Ultrasonic through transmission of Glare Laminate in squirter technique Inspection of adhesive bonded Glare With the Fokker Bond Tester Penetrant testing Radiographic inspection-General Tap-test Determination of electrical conductivity of non-ferromagnetic materials Inspection of adhesive bonded Glare With the Fokker Bond Tester Cladding thickness measurement by high frequency eddy current

Nadcap Commodity out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out CP out CP out NDT NDT NDT NDT MTL MTL MTL MTL MTL MTL MTL MTL MTL MTL MTL NMMT NMMT NMMT NMMT NMMT NMMT NMMT NMMT out NMMT NMMT NMMT NMMT NMMT NMMT NDT HT NDT NDT NDT NDT NDT NDT NDT NDT NDT NDT NDT out HT NDT out

Audit Criteria out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out out AC7108 out AC7108 out AC7114 / AC7114/1 / AC7114/1S AC7114 / AC7114/1 / AC7114/1S AC7114 / AC7114/1 / AC7114/1S AC7114 / AC7114/3 / AC7114/3S AC7101/3 AC7101/3 AC7101/3 AC7101/3 AC7101/3 AC7101/3 AC7101/3 AC7101/3 AC7101/5 AC7101/5 AC7101/5 AC7122 AC7122 AC7122 AC7122 AC7122 AC7122 AC7122 AC7122 out AC7122 AC7122 AC7122 AC7122 AC7122 AC7122 AC7114 / AC7114/2 / AC7114/2S AC7102/2 AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/3 / AC7114/3S AC7114 / AC7114/1 / AC7114/1S AC7114 / AC7114/4 / AC7114/4S out AC7102/2 AC7114 / AC7114/3 / AC7114/3S out

Airbus Specification / Nadcap commodity Cross Table issued June 1st, 2010

Page 21 of 21

Information

Airbus Specification / Nadcap commodity Cross Table - June 11 2010

21 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

267162


You might also be interested in

BETA
Airbus Specification / Nadcap commodity Cross Table - June 11 2010