Read Microsoft Word - 64201cat rev 0905.doc text version

Aerospace

Conveyance Systems Division Carter Ground Fueling

carter ground fueling

A Division of J.C. Carter Co. Inc.

UNDERWING NOZZLES

MODEL 64201

Carter is the leading manufacturer of nozzles qualified in accordance with SAE AS5877 (MIL-N-5877). The FBO OPERATIONS is listed as being qualified on the QPL. The specification defines four nozzles, D-1, D-1R, D-2 and 64201H MODELS D-2R. Thea Hose End Regulator. have D-2inlet body that includesregulator) have straight inlets. Both units 64049D-1 and D-1R nozzles The an and D-2R (includes a a 45° elbow. The D-1R is a D-1 with the addition of Along with this underwing nozzle, Carter addition, the Carter now offers an underwing nozzle designed for small have a military standard 6-bolt inlet flange in accordance with MS33786-40. Inalso offers an 64201 can be interchange fit the effect easy underwing to These or airfield, FBO, use with a new easy to use quick disconnect purchased with various options to tailor a nozzle tofitting tosystem requirements. overwing additional options, for strainer checking, with or without an effective dry are not coveredRefuelingparticular specification. with a although widely utilized in the military, Closed Circuit by any (CCR) Nozzle interchange

break. The underwing nozzle, a derivation of the 64348, utilizes the Carter Unisex Coupling as the disconnect. minimum of fuel spillage.

FEATURES FEATURES: Unisex Coupling used for quick disconnect or dry break disconnect. · All accessories have stainless steel wear ring in swivel ball joint. Designed for small airport applications on 1½" or 2" hoses. · Interlock mechanism internal to nozzle Overwing or CCR Nozzle to Underwing Nozzlewear aircraft adapter body - no pins to interchange fitting available. slots. Integral swivel, independent of quick disconnect, · No collar makes connection to aircraft easy. or other moving parts on exterior of nozzle with the exception of the Connects to 3-lug international standard aircraft operating lever. adapter. D-1 Type Nozzle D-2 Type Nozzle 64201H 64201J Self-adjusting pressure loaded nose seal. No · Fewer parts in nozzle will result in lower mechanical adjustments or springs used. Leak free maintenance costs. under extreme side loads, worn adapters and extreme temperatures. · Very rugged standard composite material Long-life stainless steel lead-in rampshandles aircraft installation interface do not include any adapter for longer life. metal to bend. New options include "U" Positive interlock - nozzle can't be removed from Bracket for nozzle stowage and one piece aircraft in open position. stirrup handle with stowage capability - no Flow control handle, of high strength zincan aircraft adapter as a need to use aluminum alloy, fully protected from damage. stowage device. Replaceable bicycle-type handles and grips standard for · Operating available. ease of operation, circular grip also lever opens nozzle in a counterclockwise for simultaneous Two threaded ports in nozzle body direction (64349 was clockwise). This eliminates interference with some vacuum breaker and product sampling fitting aircraft that are not designed to standards. installation are standard. Model 64201N Lightweight and rugged. · Operating lever replaceable from exterior Nozzle with D-3 Inlet Modular construction. of nozzle and is made of less expensive 64049B2KEJ both D-1 and D-2 positions Shown in Underwing Nozzle with 60-mesh Strainer, 1½" & 2" female NPT more ductile material. Also backed up with & BSPP threaded quick Unisex Coupling Inlet with Dry-break disconnect inlets optional. on nozzle body to prevent bending. boss and Dust Caps-for both Unisex 64201 is now available with female NPT & BSPP threaded quick NEW The Carter Couplings 1½" & 2" a · Replaceable D-3 Inlet coupling that can be changed from the D-1 break inlets optional. knob on operating handle to disconnect dry eliminate razor sharp to the D-2 configuration and vise versa. Optional 40-, 60- & 100-mesh screens retained with wear patterns The new prevalent on competitor's nozzles. variable inlet has been approved for use and snap ring on ease of removal. is listed for the QPL. This option can be procured as option N to the vacuum breaker - optional. Bonding cable, basic nozzle and it would replace either option H or J.

Bulletin 64049 9/99

Bulletin 64201 11/06

671 W. 17th671 Costa Mesa, CA 92627 · (949) 548-3421 · FAX (949) 631-2673 · E-mail [email protected] · www.eaton.com St., W. 17th St., · Costa Mesa, CA 92627 · (949) 764-2200 · Fax (949) 631-2673 See our web page at http://www.jccarter.com

BACK

FEATURES COMMON TO BOTH THE 64349 AND 64201 NOZZLES · · · Easier swiveling under all conditions. Swivel independent of quick disconnect. Connects to 3-lug international standard aircraft adapter. Self-adjusting pressure loaded nose seal No mechanical adjustments or springs used. Leak free under extreme side loads, worn adapters and extreme temperatures · · · Modular construction. 2, 2½ & 3" NPT threaded quick disconnect inlets available. Optional 40-, 60- & 100-mesh screens retained with snap ring for ease of removal.

· 35, carter45 & 55 psi Hose End Regulators ground fueling available. ·

A Division of J.C. Carter Co. Inc.

Two threaded ports in nozzle body for simultaneous vacuum breaker and product sampling fitting installation are standard. FBO OPERATIONS · Lightweight and rugged.

UNDERWING NOZZLES

· of bolt flanges minimized. MODELS Use64049

·

Choice of Ball Valve or Dry Break Disconnect for easy strainer inspection available. Bonding cable, vacuum breaker - optional. Double redundant safety lock on/easy off quick disconnect. Low pressure drop

· · ·

Along with this underwing nozzle, Carter also offers an Carter now offers an underwing nozzle designed for small interchange fitting to effect easy underwing to overwing or airfield, FBO, use with a new easy to use quick disconnect Closed Circuit Refueling (CCR) Nozzle interchange with a for strainer checking, with or without an effective dry ORDERING DATA minimum of fuel spillage. break. The underwing nozzle, a derivation of the 64348, utilizes the The part number of aas the disconnect. consists of four basic parts as illustrated below: Carter Unisex Coupling complete nozzle FEATURES: Unisex Coupling used for quick disconnect or dry break disconnect. 64201 Designed for small airport applications on 1½" or 2" hoses. PART 4 ­ Letter describing the inlet thread type and size Overwing or CCR Nozzle to Underwing Nozzle PART 3 ­ Number &/or letter describing male adapter required to mate interchange fitting available. desired inlet configuration in Part 4 and/or ball valve type. Integral swivel, independent of quick disconnect, makes connection to aircraft basic PART 2 ­ Option letter describing various changes to the easy. nozzle. Connects to 3-lug international standard aircraft adapter. Self-adjusting pressure loaded nose seal. No PART adjustments or springs used. Leak free mechanical2 under extreme side loads, worn adapters and extreme The following options may be added as Part 2 of the part number as indicated above to order a unit to meet temperatures. your requirements: Long-life stainless steel lead-in ramps interface aircraft adapter for longer life. OPTION DESCRIPTION OPTION DESCRIPTION Positive interlock - nozzle can't be removed from *A Adds 40-mesh Screen Adds Extended Circular Handle Assy (47535) aircraft L open position. in Flow control handle, of Circular Handle aluminum *B Adds 60-mesh Screen M Adds high strength zinc Assy (47488) alloy, fully protected from damage.Coupling (47566) *C Adds 100-mesh Screen N Adds D-3 Inlet Replaceable bicycle-type handles and grips standard for D Adds Bonding Cable (47235) Q Adds camlock style Dust Cap/plug ( ease of operation, circular grip also available. E Adds Vacuum Breaker (41599) R Adds Interlock for simultaneous Two threaded ports in nozzle bodyMounting Bracket vacuumS breaker and product sampling fitting **F3 Adds 35 psi Hose End Regulator Holder Bracket (not needed with Option U) installation are standard. Replaces Stick Handles with Stirrup Handle **F4 Adds 45 psi Hose End Regulator U Lightweight and rugged. with integral interlock bracket **F5 Adds 55 psi Modular construction. 64049B2KEJ Hose End Regulator Underwing Nozzle withInlet (D-1) H Elbow 60-mesh Strainer, V 1½" & 2" femaleAdds& BSPP threaded quick NPT Bonding Cable (4)7607 Unisex Coupling Inlet with Dry-break disconnect inlets Inlet per MIL-C-24356 optional. G Adds Bonding Cable (47449) W and Dust Caps for both Unisex Couplings 1½" & 2" female NPT & BSPP threaded quick J Straight Inlet (D-2) X Adds Unisex Coupling - non-valved (64019N) disconnect dry break inlets optional. K 2" female camlock quick disconnect Optional 40-, 60- & 100-mesh screens retained with snap ring for ease of removal. * Options A, B, & C only available when a male half or a ball valve from Part 3 is specified. Bonding cable, vacuum breaker - optional.

PART 1 ­ Model Number

To obtain a nozzle with two regulators, specify two options in series, F5F4 results in 55 and 45 psi Bulletin 64049 9/99 units with the 55 psi unit assemble as the one nearest the inlet. If two regulators with different 671 W. 17th St., Costa Mesa,are required the higher-pressure unit should be specified first. pressures CA 92627 · (949) 548-3421 · FAX (949) 631-2673 · E-mail [email protected]

See our web page at http://www.jccarter.com

**

BACK

PART 3 The configuration of the inlet is defined by adding the appropriate number or number and option letter from the table below in conjunction with the appropriate option letter from Part 4 below. The nozzle may terminate in an adapter half only, if desired. In this case leave Part 4 blank. To obtain a female half, quick disconnect or dry break, or to complete the specification of the ball valve outlet, Part 4 must be completed. OPTION 2 DESCRIPTION Military male adapter, disconnect OPTION DESCRIPTION Inc. A Division of J.C. Carter Co.

carter ground fueling

5 6 7

2" Uni-Sex Coupling, Valved (64020N) Adds male adapter half to mate standard QD (44316)

UNDERWING NOZZLES

*3

FBO OPERATIONS

Adds short male adapter half to mate 61154 Dry Break (44185 with D Adds Glass Inspection Port to Ball Along with this underwingRegulator; 44697 withoutan nozzle, Carter also offers Regulator). Carter now offers an underwing nozzle designed for small Valve. Option 3 only. interchange fitting to effect Addsunderwing to adapter to mate 61154 easy long male overwing or airfield, FBO, use with a new easy to use quick disconnect 8 E for strainer checking, with Adds Drag an effective dry or without Ring to Ball Valve.Closed Circuit Refueling (CCR) Nozzle interchange with a Drybreak QD (44701) Option 3 only. minimum of fuel spillage. break. The underwing nozzle, a derivation of the 64348,

MODELS

64049

Adds Ball Valve (64015). If a Ball Valve operating handle and defuel key are required, refer to Bulletin 64015 for details to order.

utilizes the Carter Unisex Coupling as the disconnect.

style quick disconnect. (43046 with FEATURES: Regulator; 44362 without Regulator). Unisex Coupling used for quick disconnect or dry break disconnect. * The inlet size and configuration option from Part 4 must be included in the part number with option Designed for small airport applications on 1½" or 2" "3" to achieve a completed nozzle and ball valve. hoses. Overwing or CCR Nozzle to Underwing Nozzle interchange4fitting available. PART Integral swivel, independent of quick disconnect, OPTION DESCRIPTION OPTION DESCRIPTION makes connection to aircraft easy. Connects to 3-lug international Inlet thread - 2" NPT standard aircraft H Inlet thread - 2½" NPT P adapter. K 4" male camlock Q Adds dust cap/plug, camlock type Self-adjusting pressure loaded nose seal. No mechanical adjustments or springs female camlock L Inlet thread - 3" NPT S 2" used. Leak free under extreme side loads, worn adapters and extreme M 4" female camlock temperatures. Long-life stainless steel lead-in ramps interface aircraft adapter for longer life. PART NUMBER EXAMPLES Positive interlock - nozzle can't be removed from aircraft in open position. Refer to the illustrated options below to help build the custom nozzle desired: Flow control handle, of high strength zinc aluminum alloy, fully strainer (C), vacuum 64201CEF4HR6H The basic nozzle with a 100-meshprotected from damage. breaker (E), 45-psi hose end Replaceable bicycle-type bracket (R) standard for control valve (F4), 45 inlet elbow (H), interlockhandles and grips standarddisconnect (6) ease of operation, with 2 ½" NPT female inlet thread (H). circular grip also available. Two threaded ports in nozzle body for simultaneous 64201CF5F4U6L The basic nozzle with a 100-mesh strainerproduct sampling fitting end control valves vacuum breaker and (C), dual 55-psi hose (F4) (the HECV closest to the nozzle will be 55 and the one closest to the nozzle will installation are standard. be 45), stirrup handle (U), standardand rugged. (6) with 3" NPT inlet thread (L). Lightweight disconnect Modular construction. 64049B2KEJ The basic nozzle with a 100-mesh strainer (C), 45-psi hose end control valve (F4) 64201CF43DEH Underwing Nozzle with 60-mesh Strainer, (flanged inlet), ball valve1½" with glass viewingBSPP (D), drag ring (E), with 2 ½" NPT (3) & 2" female NPT & port threaded quick Unisex Coupling Inlet with inlet thread. Dry-break disconnect inlets optional. and Dust Caps for both Unisex Couplings 1½" & 2" female NPT & BSPP threaded quick 64201N Basic nozzle that has a D-3 inlet coupling that allows the nozzle to be used in disconnect dry break inlets optional. either the D-1 or D-2 configuration as desired. Optional 40-, 60- & 100-mesh screens retained with snap ring for ease of removal. Bonding cable, vacuum breaker - optional.

Bulletin 64049 9/99

4

Adapter, Male, Swivel QD

9

Adds male adapter half to mate 60427

671 W. 17th St., Costa Mesa, CA 92627 · (949) 548-3421 · FAX (949) 631-2673 · E-mail [email protected] See our web page at http://www.jccarter.com

BACK

ILLUSTRATED OPTIONS

carter ground fueling

A Division of J.C. Carter Co. Inc.

UNDERWING NOZZLES

FBO OPERATIONS

MODELS

64049

Along with this underwing nozzle, Carter also offers an interchange fitting to effect easy underwing to overwing or Closed Circuit Refueling (CCR) Nozzle interchange with a minimum of fuel spillage. FEATURES: Unisex Coupling used for quick disconnect or dry break disconnect. Designed for small airport applications on 1½" or 2" hoses. Overwing or CCR Nozzle to Underwing Nozzle interchange fitting available. Integral swivel, independent of quick disconnect, makes connection to aircraft easy. Connects to 3-lug international standard aircraft adapter. Self-adjusting pressure loaded nose seal. No mechanical adjustments or springs used. Leak free under extreme side loads, worn adapters and extreme temperatures. Long-life stainless steel lead-in ramps interface aircraft adapter for longer life. Positive interlock - nozzle can't be removed from aircraft in open position. Flow control handle, of high strength zinc aluminum alloy, fully protected from damage. Replaceable bicycle-type handles and grips standard for ease of operation, circular grip also available. Two threaded ports in nozzle body for simultaneous vacuum breaker and product sampling fitting installation are standard. Lightweight and rugged. Modular construction. 1½" & 2" female NPT & BSPP threaded quick disconnect inlets optional. 1½" & 2" female NPT & BSPP threaded quick disconnect dry break inlets optional. Optional 40-, 60- & 100-mesh screens retained with snap ring for ease of removal. Bonding cable, vacuum breaker - optional.

Bulletin 64049 9/99

Carter now offers an underwing nozzle designed for small airfield, FBO, use with a new easy to use quick disconnect for strainer checking, with or without an effective dry break. The underwing nozzle, a derivation of the 64348, utilizes the Carter Unisex Coupling as the disconnect.

64049B2KEJ Underwing Nozzle with 60-mesh Strainer, Unisex Coupling Inlet with Dry-break and Dust Caps for both Unisex Couplings

671 W. 17th St., Costa Mesa, CA 92627 · (949) 548-3421 · FAX (949) 631-2673 · E-mail [email protected] See our web page at http://www.jccarter.com

BACK

Information

Microsoft Word - 64201cat rev 0905.doc

4 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

549219