Read 71-104.indd text version

Topic: Environmental and Energy Issues

SYMPOSIUM: ENERGY MATERIALS

9:20 a.m. Effect of Test Method on Fracture Toughness of Materials in Aggressive Environments Brian Somerday, Kevin Nibur, Chris San Marchi 10 a.m. Anelasticity in Austenitic Steels Ashwin Rao, John Bouchard, Mike Fitzpatrick

Tuesday, October 27, 2009

Session Title: Dielectric, Photovoltaic and Other Energy Materials II

Room 323 4 p.m. Microcharacterization of Oxidation Effects on a New CF8CPlus Cast Stainless Steel Creep-Tested in Air at 750­850°C Neal Evans, Philip J. Maziasz, John P. Shingledecker

Topic: Fundamentals and Characterization

SYMPOSIUM: ACERS SOSMAN AWARD SYMPOSIUM: THREE-DIMENSIONAL STRUCTURE OF INTERFACIAL NETWORKS

SYMPOSIUM: FUEL CELLS: MATERIALS, PROCESSING, MANUFACTURING, BALANCE OF PLANT AND SYSTEMS OPERATION

Wednesday, October 28, 2009

Session Title: Three-Dimensional Structure of Interfacial Networks

Room 406 9:20 a.m. Recent Advances in Polycrystalline Microstructure Segmentation Marc De Graef

Wednesday, October 28, 2009

Session Title: Interconnects

Room 324 4:20 p.m. Influence of Microtexture on the Oxidation of SOFC Interconnect Phaniraj Madakashira, Ju Hun Kim, Dong-Ik Kim

SYMPOSIUM: GREEN ENGINEERING AND ENVIRONMENTAL STEWARDSHIP

SYMPOSIUM: CHARLES R. MORIN MEMORIAL SYMPOSIUM ON FAILURE ANALYSIS AND PREVENTION

Monday, October 26, 2009

Session Title: Chuck Morin Memorial Session

Room 305 2:20 p.m. Fundamentals of Failure Analysis: Two Examples From the Career of Charles R. Morin John Wilkinson, Matthew T. Kenner

Tuesday, October 27, 2009

Session Title: Environmental Stewardship in Process Manufacturing

Room 325 9 a.m. Improved Energy Efficiency and Environmental Benefits for Calcium Treatment in Steel James Yanker 11:20 a.m. Biomass Pretreatment for Integrated Steelmaking Shiju Thomas, Paul Cha, Steven J. McKnight, Vincent A. Bouma, Andrew L. Petrik, Christopher J. Ickes

Tuesday, October 27, 2009

Session Title: Tools and Techniques for Failure Analysis

Room 305 11 a.m. Operational Safety Assessment of 1940s Cast Steel Pulleys Donato Firrao, Paolo Matteis, Pasquale Russo Spena

Session Title: Education and Materials Selection Methods

Room 325 3 p.m. Engineering for Life: A Case Study in the Use of Design for Environment to Create a Sustainable Product Amy A. Costello, Marsha Bischel

Wednesday, October 28, 2009

Session Title: Analyzing Failures of Gears and Bearings

Room 305 8 a.m. Large Roller Bearing Failure Ronald Parrington, Dave Christie 8:40 a.m. Steel Gear Failure Analysis: Principles and Practice William Warke 10 a.m. A General Review of the Superficial Fatigue Failures Modes Met in Rolling Bearings Technology: Origins, Influences and Solutions Pierre Dupont

SYMPOSIUM: MATERIALS SOLUTIONS FOR THE NUCLEAR RENAISSANCE

Tuesday, October 27, 2009

Session Title: Materials Performance in Extreme Environments

Room 326

Steel-Related Papers

Session Title: Failures Involving Fatigue or Fracture I

Room 305 4 p.m. Premature Fatigue Fracture of a Grade 10.9 Twelve-Lobe Flange Bolt Made of SAE 1541 Steel Jianghuai Yang 4:20 p.m. Analysis of a Bucketwheel Stacker Reclaimer Structural Failure Luiz Henrique de Almeida, Eduardo de Miranda Batista, Leonardo Araujo

SYMPOSIUM: NEW ROLES FOR ELECTRIC AND MAGNETIC FIELDS IN PROCESSING, MICROSTRUCTURE EVOLUTION, AND PERFORMANCE OF MATERIALS

Wednesday, October 28, 2009

Session Title: Novel Phenomena Related to Electric, Magnetic and Acoustic Fields II

Room 304 2:40 p.m. Nondestructive Evaluation of the Decarburization Depth of Spring Steel With Electromagnetic Measurement Methods Denijel Burzic, Jörg Zamberger, Ernst Kozeschnik

SYMPOSIUM: DISCOVERY AND OPTIMIZATION OF MATERIALS THROUGH COMPUTATIONAL DESIGN

Tuesday, October 27, 2009

Session Title: Multiscale Modeling of Materials

Room 302 8:40 a.m. Analyzing Complex Microstructures With OOF Stephen Langer, Andrew C.E. Reid, Valerie R. Coffman, Gunay Dogan 9:20 a.m. Digital Material Representation as a Tool for Computational Design of Microstructures Lukasz Madej, Lukasz Rauch

SYMPOSIUM: PHASE EQUILIBRIA SYMPOSIUM IN MEMORY OF DR. RICHARD SPRIGGS

Thursday, October 29, 2009

Session Title: Phase Transformations in Oxides and Phase Equilibria in Intermetallics

Room 302 11 a.m. Thermodynamic Assessment of Ce-Mo, Mo-La, Mo-Y, Ce-V, La-V, V-Y Systems Wren Chan, Michael Gao, Paul King, Omer Dogan

SYMPOSIUM: INTEGRATED COMPUTATIONAL AND EXPERIMENTAL INVESTIGATIONS ON MICROSTRUCTURE EVOLUTION OF COARSENING SYSTEMS

SYMPOSIUM: PHASE STABILITY, DIFFUSION KINETICS AND THEIR APPLICATIONS (PSDK-IV)

Tuesday, October 27, 2009

Session Title: Diffusion Kinetics

Room 307 8 a.m. First Principles Diffusion Kinetics in Metal Alloys Emily Carter

Monday, October 26, 2009

Session Title: Precipitates and Precipitate/Grain Boundary Interactions

Room 301 3:40 p.m. Nanoprecipitates in Steels: Experiments and Simulations Dierk Raabe, J. Neugebauer, D. Ponge

Session Title: Microstructure Modeling

Room 307 3 p.m. Simulation of Spheroidite Dissolution at 700\\176C in AISI 1074 Steel Liang Quan, Laura Cerully, Tom Sanders

SYMPOSIUM: MICROSTRUCTURE CHARACTERIZATION, ANALYSES, AND DESIGN

Wednesday, October 28, 2009

Session Title: Design I

Room 310 2 p.m. Microstructural Modeling of Failure Modes in High-Strength Steels Tarek Hatem, Mohammed Zikry

SYMPOSIUM: RECENT ADVANCES IN STRUCTURAL CHARACTERIZATION OF MATERIALS

Thursday, October 29, 2009

Session Title: Other Techniques: Developments and Applications II

Room 306 2:20 p.m. Adhesive Bonding of Advanced High-Strength-Steels With Galvannealed Zinc Coating Jagdeesh Bandekar, Chann Cheng, Jeffrey Fenton, Michael Golden, Greg Meyers, Alan Robinson, Benda Yan

SYMPOSIUM: STRUCTURAL TRANSITIONS AND LOCAL DEFORMATION PROCESSES AT AND NEAR GRAIN BOUNDARIES

Session Title: Session II

Room 327 2 p.m. Effect of Oxygen Partial Pressure During Annealing on the Selective Oxidation and Galvanizing of a 1.5% Al TRIPAssisted Steel Erika Bellhouse, Joseph R. McDermid 2:20 p.m. Influences of Ni-Pretreatments on Galvanized Coatings Yuttanant Boonyongmaneerat, Run Sanguanmoo, Kanokwan Saengkiettiyut, Pranee Rattanawaleedirojn, Sawalee Saenapitak 2:40 p.m. Advanced in Zinc Coatings on Metallic Sheets Using Galvanizing Baths Subash Ram 3 p.m. Corrosion Resistant, Protective Zn Coating by Electro-Plasma Technology Pratheesh George, Varshni Singh, V. Palshin, Edward Daigle 3:40 p.m. Thermal Spray Coating of Galvanizing Rolls Ram Iyengar 4 p.m. Surface Performance of Environment-Friendly Galvanized Sheet for Appliance Yong Chen

Monday, October 26, 2009

Session Title: Grain Boundary Structure and Sliding

Room 309 4 p.m. Twin-Induced Grain Boundary Engineering of Austenitic Stainless Steels Hiroyuki Kokawa, Masato Michiuchi, Masayuki Shimada, Yutaka S. Sato, Zhanjie Wang

Tuesday, October 27, 2009

Session Title: Transformations Experimental Techniques

Room 407 11 a.m. Investigations of Local Structure-Property Relations at Grain Boundaries Using Spherical Nanoindentation and Orientation Imaging Microscopy Siddhartha Pathak, Surya Kalidindi, Roger Doherty, Shraddha Vachhani, Johann Michler, Killian Wasmer

Wednesday, October 28, 2009

Session Title: Damage

Room 309 8 a.m. Interface Mechanics in TWIP Steels Dierk Raabe, S. Zaefferer, I. Gutierrez, F. Roters 8:20 a.m. Crack Formation in Carbon Steels Resulting From NonEquilibrium Grain Boundary Segregation During Cooling Mohammad Allazadeh, Calixto Issac Garcia, Anthony J. DeArdo

SYMPOSIUM: ELECTRON BACKSCATTERED DIFFRACTION ANALYSIS OF STEELS

Thursday, October 29, 2009

Session Title: EBSD Analysis of Steel I

Room 328 8 a.m. EBSD-Based Differentiation of Ferrite and Martensite Stuart Wright, Matthew M. Nowell 8:20 a.m. Analyzing Complex Steel Microstructures Using Electron Back Scattered Diffraction -- Image Quality Kengun Cho, Isaac Garcia, Jong-Kyo Choi , Mingjian Hua, Anthony DeArdo 8:40 a.m. Analysis of HSLA Steel Microstructures by Various Techniques Matthew Merwin, C.T. Becker, D.R. Giansante 9 a.m. Effect of TMCP Parameters on Microstructures and LowTemperature Toughness for Acicular Ferrite Pipeline Steels Yiyin Shan, Yi Wang, Wei Wang 9:20 a.m. Crystallographic Analysis of Martensite and Bainite in Steels by Electron Backscatter Diffraction Tadashi Furuhara, Naoki Takayama, Naoya Kamikawa, Goro Miyamoto 10 a.m. Prior Austenite Reconstruction of Post-Weld Microstructures in Friction Stir Welded HSLA Steels Using OIM Majid Abbasi, Lingyun Wei, Tracy W. Nelson

Topic: Iron and Steel

SYMPOSIUM: ADVANCES IN ZINC-COATED STEEL SHEET: PROCESSING AND PROPERTIES

Monday, October 26, 2009

Session Title: Session I

Room 327 11 a.m. Effect of Substrate Texture on Coating Phase Formation and Effect of Coating Texture on Coating Formability of Industrially Produced Galvannealed Coated Steels Anirban Chakraborty, Ranjit Kumar Ray 11:20 a.m. Continuous Galvanizing of Martensitic and Complex Phase Sheet Steels Longxiu Pan, Joseph McDermid, Elhachmi Essadiqi, Benoit Voyzelle, Frank E. Goodwin 11:40 a.m. Thermodynamic Analysis of Selective Oxidation Behavior of Si and Mn-Added Steel During Recrystallization Annealing Yoshitsugu Suzuki, Takako Yamashita, Yoshiharu Sugimoto, Sakae Fujita, Shu Yamaguchi

Steel-Related Papers

10:20 a.m. Subgrain Texture Evolution during Biaxial Deformation in Interstitial-Free and Dual-Phase Steels Heung Nam Han, Sukbin Lee, Anthony D. Rollett, Do Hyun Kim, Kyu Hwan Oh, Ricardo A. Lebensohn 10:40 a.m. Texture Change During Grain Growth in Non-Oriented Electrical Steel Yoshihiro Arita, Anthony D. Rollett 3 p.m. Inclusion Nucleation and Growth From Nano-Scale to MiliScale Lifeng Zhang, Kent Peaslee, Brian G. Thomas 3:40 p.m. Modification of Spinels by Calcium in Liquid Steel Neerav Verma, Woojin Noh, Michael Potter, Petrus Christiaan Pistorius, Richard Fruehan 4 p.m. Control of Inclusions in Bottom Filled Steel Ingots Baoguang Sang, Lijun Xia, Dianzhong Li

Session Title: EBSD Analysis of Steels II

Room 328 2 p.m. Analysis of Work Hardening in a Fe-22Mn-0.6C TWIP Steels by Quantitative Electron Channelling Contrast (QUECCI) Ivan Gutierrez-Urrutia, Stefan Zaefferer, Dierk Raabe 2:20 p.m. Quantitative Determination of Twin Volume Fraction in TWIP Steels by High-Resolution EBSD David Steinmetz, Stefan Zaefferer 2:40 p.m. Microstructure and Microtexture as a Function of Grain Size in 301LN Stainless Steel David Marechal, Chad Sinclair, Jean-Denis Mithieux, Valérie Kostoj 3 p.m. The Effect of Microstructure and Crystallography on Corrosion Behavior in a Duplex Steel Alexis Lewis, Andrew B. Geltmacher 3:40 p.m. EBSD Characterization of Shear Deformation in Iron Ellen Cerreta, John F. Bingert, Mike F. Lopez, Carl P. Trujillo, Curt A. Bronkhorst, Benjamin L. Hansen, George T. Gray 4 p.m. EBSD Analysis of Warm Multiaxially Forged Mild Steel Aditya Padap, Gajanan P. Chaudhari, S.K. Nath, Vivek Pancholi 4:20 p.m. Microstructural Analysis of High-Strength Steel Taylor Cylinder Specimens K. Boyd, K. Torres, S.E. Jones, R.A. Brewster

Tuesday, October 27, 2009

Session Title: Ladle Metallurgy, Continuous Casting and Nozzle Clogging

Room 328 8 a.m. An Experimental Study of Oxide-Inclusion Evolution as Function of Ti/Al Ratios in Iron Melts Cong Wang, Seetharaman Sridhar 8:40 a.m. Inclusions and Nozzle Clogging for a Billet Continuous Casting Process Xiangjun Zuo, Lifeng Zhang 9 a.m. Modeling of Clogging and Erosion of Nozzle Refractories in Steel Casting Brian G. Thomas, Oluwaseun Araromi, Eric Conzemius 9:20 a.m. Behavior of MgO·Al2O3-Based Inclusions in High-Pressure Boiler Steel During Refining Process Shufeng Yang, Jingshe Li, Lifeng Zhang, Kent D. Peaslee, Yufeng Wang 10 a.m. Experimental Study on RH Vacuum Decarburization for Ultralow-Carbon Steels at Baosteel Zongze Huang, Zhigang Ma 10:20 a.m. Control of Ultralow Titanium in Ultralow-Carbon Al-Si-Killed Steel Zhang Feng, Li Guangqiang

SYMPOSIUM: INCLUSIONS AND CLEAN STEELS

Monday, October 26, 2009

Session Title: Inclusions and Steel Properties: General Session

Room 328 2 p.m. Studies on Inclusions in Steel in the Past 100 Years Lifeng Zhang 2:20 p.m. Optimization of Calcium Treatment to Improve Cleanliness of Cast Steel Vintee Singh, Simon Lekakh, Edith Martinez, Kent D. Peaslee 2:40 p.m. Reduction of Slivers due to Non-Metallic Inclusion in Continuous Casting Vijayasaradhi Sanam

Tuesday, October 27, 2009

Session Title: Modeling on Fluid Flow and Inclusion Motion

Room 328

2 p.m. Evaluation of Water Modeling and Transient Fluid Flows in Continuous Casters Rajneesh Chaudhary, Bret T. Rietow, Brian G. Thomas 2:20 p.m. Water Model Simulation for Flow State in Slab Continuous Casting Mold Dengfu Chen, Xing Jin, Dajiang Zhang, Lifeng Zhang, Xin Xie, Xianguang Zhang, Fuen Zhang 2:40 p.m. Transient Phenomena of Fluid Flow and Inclusion Motion in Continuous Casting Strands Yufeng Wang, Lifeng Zhang 3 p.m. Investigation of Refractory Properties on the Initial Bubble Behavior in the Water Model of Continuous Casting Process Go-Gi Lee, Seon-Hyo Kim, Brian G. Thomas 3:20 p.m. Modeling and Removal of Inclusions in Continuous Casting Petri Väyrynen, Shenqiang Wang, Seppo Louhenkilpi, Lauri Holappa 3:40 p.m. The Role of Gas Shrouded Ladle Nozzles in Affecting Steel Quality Within a Tundish Kinnor Chattopadhyay, Roderick Guthrie, Mihaiela Isac

10:20 a.m. Application of Oxide Metallurgy to Improving HAZ Toughness of High-Strength Steels Kyung-Shik Oh, Woo-Yeol Cha, Jang-Yong Yoo, Jae-Young Cho, Jong-Min Park 10:40 a.m. Development of Process Technology for Control of Thick Sulphide Inclusions in Sulfur-Bearing Steel

Kiran Keshari, Sisir Kumar Samanta SYMPOSIUM: PROCESSING, MICROSTRUCTURE, AND PROPERTIES OF CAST, FORGED, AND SPECIALTY STEELS

Wednesday, October 28, 2009

Session Title: Wrought Steels

Room 329 8 a.m. A Discussion of Gettering Sulfur as Titanium Carbosulfides in Low-Alloy Steels: Their Influence on Toughness and the Effects of Silicon Content on Their Formation Pranay Choudhary, Warren Garrison 8:20 a.m. A Study of Micro-Cracks in Overheated Forgings of UltralowSulfur Steels for Aircraft Engine Crankshafts John Barsom 8:40 a.m. Combining Copper and NiAl Precipitation in Martensitic Precipitation Strengthened Stainless Steels: Effects on Strength and Ductile-to-Brittle Transition Temperatures Warren Garrison 9 a.m. Corrosion and Property Comparison of Ultrahigh-Strength Steel Alloys David Wert, Thomas N. Werley 9:20 a.m. Effects of Non-Carbide Forming Elements on the Toughness and Tempering Response of Medium-Chromium Hot Work Die Steels Warren Garrison 10 a.m. In-Situ Inclusion Behavior in Ultrahigh-Strength Steels Jon Groh, Mark A. Rhoads, Xishan Xie 10:20 a.m. Overheat Forging Studies of Ultralow-Sulfur Steels Robert Hinton 10:40 a.m. Void Nucleation at Inclusions in Three Heats of 4340 Steel Differing in Inclusion Type Pranay Choudhary, Warren Garrison 11 a.m. Effect of the Imposition of Compressive Stress on a Remaining Fatigue Life Jinesung Jung, Hansang Lee 11:20 a.m. Evaluation of the Influence of Intercritical Treatment Variables on the Transformation Behavior of a Medium-Carbon Steel Kenneth Alaneme, Celestine Monde Kamma 11:40 a.m.

Wednesday, October 28, 2009

Session Title: Inclusion/Precipitate Engineering and Inclusion Evaluation

Room 328 8 a.m. An Overview of Recent Developments in Experimental and Numerical Studies for the In-Situ Measurement of Large Inclusions (~50­400 Microns) in Liquid Steel Processing Vessels Roderick Guthrie, Mihaiela Isac, Xiaodong Wang 8:40 a.m. Development and Use of Grain Refiners for Steels Leiv Kolbeinsen, Øystein Grong, Casper van der Eijk, Gabriella Tranell 9 a.m. Latest Developments in Spark OES for Iron and Steel Industry: Combined Quantitative Analysis and Analysis of Non-Metallic Inclusions Brad Cooley 9:20 a.m. Analysis of Non Metallic Inclusions Using SEM/EDS Alexander Seyfarth, Samuel Scheller 10 a.m. In-Situ Observation of Agglomeration Behavior of Inclusion Particles of Molten Steel With Latest Model of Confocal Scanning Violet Laser Microscope Riun Kanno, Yoshitoshi Saito, Taijiro Matsui, Nozomu Uchida

Steel-Related Papers

Study on Ti-Bearing Low-Carbon Bainitic Steel With 900 MPa Yield Strength Hua Zheng

SYMPOSIUM: STEEL PROCESSING, PRODUCT AND APPLICATIONS SYMPOSIUM

Monday, October 26, 2009

Session Title: Cast Steels

Room 329 2 p.m. Sensors for Slag and Metal Level Detection in Secondary Melt Processing Gary Dispensa 2:20 p.m. Neural Network-Based Control of Secondary Melt Processing Gary Dispensa 2:40 p.m. Combined Effect of Boron, Titanium and Rapid Solidification on Microstructure of Alloy 800 Anil Bhargava, A.N. Tiwari, C.P. Sharma 3:40 p.m. Effect of Titanium on the As-Cast Microstructure of a HighChromium, High-Carbon Tool Steel Hamid Keshmiri 4 p.m. Effects of F-EMS on Solidification Structure of 60Si2CrVAT Spring Steel Billet Wang Kai, Hu Junhui 4:20 p.m. High-Temperature Properties of Steel L245MB During Slab Continuous Casting Process Dengfu Chen, Mujun Long, Lifeng Zhang, Xingjian Gao, Liwei Song 4:40 p.m. Calculating Model Establishing and Application of Nitriding and Denitriding to 304 Stainless Steel in AOD Chunfei Shen, Zhou-hua Jiang, Qiao-lei Shi, Yang Li 5 p.m. Research on the New Technology High-Speed Steel Produced by Electroslag Remelting Xi-min Zang, Zhou-Jua Jiang, Tie-yi Pan, Xin Geng 5:20 p.m. A Simple Model on Dendrite Growth During Steel Continuous Casting Process Wei Guo, Lifeng Zhang, Miaoyong Zhu 5:40 p.m. Structures of Horizontally Continuously Cast Steel Billet Pongsak Chaengkham, Panya Srichandr 6 p.m. Study on the Strengthening Mechanism of Nb-Ti-Bearing HSLA Steel Liu Changming

Session Title: General Session -- Steel Overview

Room 330 11 a.m. The Metallurgy of the Caribbean Steel Drum and Applications L.E. Murr 11:20 a.m. Different Hot Working Behaviors Did Not Impede Transition From Wrought Iron to Steel -- Explanations, International Histories Hugh McQueen 11:40 a.m. The Transition by Virginia DOT to Corrosion-Resistant Reinforcement for Bridge Decks Stephen Sharp, Michael M. Sprinkel Noon Steel Processing and Formation Chukwuemeka Uzomah

Session Title: Sheet Steels I

Room 330 2 p.m. Development of New Steel Grades by Experimental Simulation Ernst Tragl, Johann Strutzenberger, Gerhard Angeli, Andreas Pichler, Josef Faderl, Herwig Haunschmid 2:20 p.m. Calculation of TTT Diagrams for Low-Alloy Steels S. Niyanth 2:40 p.m. Effects of Cooling Rate, and Cool Deformation on Mechanical Properties and Microstructure of a Hot Rolled NbMicroalloyed Steel Hashem Mousavi Anijdan, Mehdi Sanjari, Stephen Yue 3 p.m. Microband Induced Plasticity and Deformation Mode Transitions in Fully Austenite Steels Gyosung Kim, Sung Kyu Kim, Si Woo Hwang, Chong Soo Lee, Kyung-Tae Park 3:40 p.m. Effect of Ductile-Crack-Initiation Property on Edge Flangeability of High-Tensile-Strength Steel Sheets Yuzo Takahashi, Osamu Kawano 4 p.m. Effect of Holding Time Before Cool Deformation on Microstructure Evolution and Mechanical Properties of Microalloyed Steels Hashem Mousavi Anijdan, Ahmad Rezaeian, Stephen Yue 4:20 p.m. A Study on the Plastic Deformation of Sheared Edges of Advanced High-Strength Steels Constantin Chiriac 4:40 p.m. Temper-Resistant 1,600 MPa/8.7%El AISI1020 Flash Bainite Processed Steel Made in 5 Seconds Gary Cola

5 p.m. Simulating Fabrication of Advanced High-Strength Steel Tubes Using Press Forming and High Frequency Induction Welding Muhammad Rashid, Pierre Martin

9:20 a.m. Microstructures and Mechanical Properties of HighManganese MnSiAl TRIP-Aided Steel Sheets Chang-Seok Oh, Dong-Woo Suh, Seong-Jun Park, Tae-Ho Lee, Sung-Joon Kim 10 a.m. The Effect of Carbon Content on the Microstructure and Mechanical Properties of a Fe-22Mn TWIP Steel Eileen Yang, Hatem S. Zurob, Joseph R. McDermid 10:20 a.m. Phase Field Modeling of Austenite Formation From FerriteCarbide Aggregates Hamid Azizi-Alizamini, Matthias Militzer, Warren J. Poole 10:40 a.m. Effects of Heat Treatment on Microstructure and Mechanical Properties of Hot-Dip Galvanized Complex Phase Steel Florian Hairer, Christian Krempaszky, Ewald Werner, Kurt Satzinger, Thomas Hebesberger, Andreas Pichler 11 a.m. Influence of Cooling Rate on Microstructure Evolution in a Low-Carbon High-Strength Microalloyed Bainite/Martensite Dual-Phase Steel Xing-Feng Mao, Lian-Deng Yao, Zi-Gang Li, Xue-Li Tao, Kai-Ming Wu 11:20 a.m. Microstructural Evolution and Strain-Hardening of Fe-30Mn During Tensile Deformation Xin Liang, Joseph McDermid, Xiang Wang, David Embury, Hatem Zurob, Olivier Bouaziz 11:40 a.m. Research Into an Original 600 MPa Galvanizing Dual-Phase Steel With High Amount of Aluminum Wang Hui

Tuesday, October 27, 2009

Session Title: Modeling of Rolling and Cooling

Room 330 2:20 p.m. Infrared Thermography of a TMCP Microalloyed Steel Skelp at the Upcoiler J. Barry Wiskel, Carol Jefferies, Hua Deng, Hani Henein 2:40 p.m. Research on the Mill Pacing Technology on Plate Mill Yuchuan Miao 3:20 p.m. Simulation of Solid-Solid Phase Transformation During the Cooling Process Mohammad Allazadeh 3:40 p.m. The Development of Optimum Modes of Rolling and Post Deformation Processing of Bar Stocks From Doped Steel in Diameter More Than 270 mm Sereda Borys, Alexandr Tumko, Irina Kruglyak, Sergiy Sheyko, Anton Kovalenko 4 p.m. Unsteady State Hardness Prediction of Industrial Quenched Steel Bar [Three-Dimensional] Prof. Dr. Mohamed Elshayeb, Abdlmanam Elmaryami 4:20 p.m. Unsteady State Hardness Prediction of Industrial Quenched Steel Bar [One- and Two-Dimensional] Prof. Dr. Mohamed Elshayeb, Abdlmanam Elmaryami 4:40 p.m. Mathematical Description of Alpha-Martensite Formation and Its Application in the Detection of Damage in Sheet Metal Katrin Weilandt, B.-A. Behrens, Jan Jocker

Session Title: Stainless and High-Alloy Steels

Room 329 8 a.m. Low-Temperature Carburization of the Duplex Stainless Steel 2205: Improvements in Hardness, Strength, Fatigue Resistance and Crevice Corrosion Resistance Reza Sharghi-Moshtaghin, Harold Kahn, Yindong Ge, Xiaoting Gu, Gary Michal, Frank Ernst, Farrel Martin, Paul Natishan, Roy Rayne, Arthur Heuer 8:20 a.m. TEM and Neutron Diffraction Study on Deformation Microstructure in High-Nitrogen Austenitic Stainless Steels Tae-Ho Lee, Hae-Jung Bang, Sung-Tae Kim, Heon-Young Ha, Chang-Seok Og, Sung-Joon Kim, Eun Joo Shin 8:40 a.m. Carburization of Ferritic Stainless Steels at Low Temperatures Gary Michal, Joshua H. Katz, Frank Ernst, Arthur H. Heuer, Harold Kahn 9 a.m. Design of Fe-Mn-Si-Cr Shape Memory Alloy Fishplates Aided by Constitutive Modeling of Transformation-Induced Strains Susan Farjami, Syoutaku Kozaki, Tadakatsu Maruyama, Hiroshi Kubo

Session Title: Sheet Steels II

Room 330 8 a.m. Aspects of Formability of AHS Steels Determined by Instrumented Hole Expansion Testing Anna Karelova, Matthias Dünckelmeyer, Christian Krempaszky, Ewald Werner, Thomas Hebesberger, Andreas Pichler 8:40 a.m. Fatigue and Fatigue Crack Propagation Behaviors of HighManganese Steel Sanguk Jin, Jaeki Kwon, Wookil Jang, Soongi Lee, Jongkyo Choi, Jehyun Lee, Sangshik Kim 9 a.m. Dynamic Recrystallization of a Nb-Bearing Al-Si TRIP Steel Ramon Zubialde, Pello Uranga, Beatriz López, Jose M. RodriguezIbabe

Steel-Related Papers

9:20 a.m. Alloyed Forged Super-Deep Hardening Layer Cold Work Roll Trial-Manufacture and Application Guosheng Wu 10 a.m. Effect of Alloy Composition on the Corrosion Resistance of Martensitic Stainless Tool Steels Maria K. Sawford, John J. Eckenrod, Alojz Kajinic, Andrzej Wojcieszynski 10:20 a.m. Gallium Content Effects on Embrittlement in Low-Carbon Steels Michael Brooks, Eric Summers 10:40 a.m. Analysis and Production of the Super-Low-Carbon Duplex Stainless Steel in Baosteel Donggang Li 11 a.m. Thin-Walled, Low-Alloy Steel Structures Produced Through the Gas Carburization of Fully Reduced Metal Oxide Powder Mixtures Laura Cerully, Tom H. Sanders, Joe K. Cochran 11:20 a.m. Influence of Heat Treatment on the Corrosion and Electrochemical Behavior of Austenitic Stainless Steel Mosaad Sadawy, R.G. Heseinov, T.U. Shirinov, H.M. Tahirlu 11:40 a.m. Comparing the Up-Quenching Austempering With Conventional Austempering on Mechanical Properties of an Ultrahigh-Strength Steel Seyed Majid Safi 10:20 a.m. Effect of Si, Al and Mo Alloying on Tensile Properties Obtained by Quenching and Partitioning Emmanuel De Moor, Cecilia Föjer, Jan Penning, John G. Speer 10:40 a.m. Microstructure and Mechanical Properties of Ni-Added HighStrength Steels Subjected to Quenching and Partitioning (Q&P) Heat Treatment Ana Rosa Martins, Fernando Rizzo, Daniel Coelho, John G. Speer, David Edmonds, D. Matlock, K. He 11 a.m. Steel Product Metallurgy -- From Prehistory to Pressure Vessels Judith Todd 11:20 a.m. Microstructural Characterization and Fracture Behavior of Forging Steel Crankshaft F. Khalid

Session Title: Tribute to Professor David V. Edmonds II

Room 330 2 p.m. A Tribute to Professor David V. Edmonds on the Eve of His Retirement H.K.D.H. Bhadeshia, John G. Speer 2:40 p.m. The Intragranular Nucleation of Ferrite in Heavy Steel Sections Isaac Garcia, Khaled Al-Hajeri, Mingjian Hau, Anthony DeArdo 3 p.m. The Formation of Pearlitic Plessite in Iron-Nickel Alloys Paul Howell 3:40 p.m. Why and How Lath Martensite Was Named George Krauss 4 p.m. Microstructure of Interphase Boundary Precipitation of Alloy Carbide in Microalloyed Steels Goro Miyamoto, Naoya Kamikawa, Behrang Poorganji, Tadashi Furuhara 4:20 p.m. Isothermal Transformation of CMnSi and CMnSiAl Steels in the Ms-Mf Temperature Range Bruno De Cooman, John G. Speer, Dong Hwi Kim, Han Soo Kim 4:40 p.m. Increasing the Austenite Content of AHSS through DualStabilization Thermal Processing Gary Michal, Arthur H. Heuer

Wednesday, October 28, 2009

Session Title: Tribute to Professor David V. Edmonds I

Room 330 8 a.m. Overview of Bainite Models Applicable to Advanced HighStrength Steels Fateh Fazeli, Tao Jia, Matthias Militzer 8:20 a.m. Mechanical Properties of a Medium-Carbon Low-Alloy Steel Processed by a Novel Two-Step Austempering Process Susil Putatunda 8:40 a.m. Deformation Induced Ferrite Transformation in Low-Carbon Cr-V Steels Martin Buhler, Teresa Perez, Victoria Ramos 9 a.m. Development of Vanadium Microalloyed High-Strength Hot Strip for Production With Reduced Rolling Forces David Milbourn 9:20 a.m. The Formation of Abnormal Ferrite in Hypereutectoid Steels Revisited Torranin Chairuangsri, David Vernon Edmonds 10 a.m. Bainitic Hot Strip Steels Microalloyed With Vanadium Tadeusz Siwecki, J. Eliasson, R. Lagneborg, B. Hutchinson

Thursday, October 29, 2009

Session Title: Steel Process Technology

Room 330 8 a.m. New Rail Steels for the 21st Century Isaac Garcia, R. Ordonez, Semih Kalay, Anthony DeArdo

8:20 a.m. Effect of Ti Additions on Charpy Fracture Energy of ASTM A 710 Grade B Cu-Precipitation-Strengthened Steel Semyon Vaynman, Morris E. Fine, Riad Asfahani 8:40 a.m. Weld Simulation in X100 Pipeline Steel Graeme Goodall, John Bowker, Mathieu Brochu 9 a.m. The Effect of Processing Conditions and Cooling Rate on API X-70 and X-100 Grade Steels Mohamed Salem, Eric J. Palmiere, Saad M. Al-Muaili 9:20 a.m. Weldability of a 700MPa Grade Low-Carbon Bainitic Steel Produced by CSP Ran Wei, Guo-Hua Jiao, De-Zhi Wen, Kai-Ming Wu 10 a.m. Influence of C and Nb on Microstructures and Properties of As-Rolled and Heat Treated ULCB Steels Pasi Suikkanen, Anthony DeArdo, Pentti Karjalainen 10:20 a.m. High Collapse Tubulars for the Oil and Gas Industry, Manufacturing and Characterization Federico Daguerre, Gustavo Lopez Turconi, Juan Carlos Gonzalez 10:40 a.m. Microstructural Evolution and Grain Refinement of a HighStrength Low-Alloy Steel Produced by Compact Strip Production Gang Huang, De-Zhi Wen, Guo-Hua Jiao, Kai-Ming Wu 11 a.m. Full-Scale Combined Load Premium Connection Testing in an H2S Environment Andrea Romero, Robert S. Sivley, Samuel Herod, Peter Kis, Jonathan L Heseltine

2:40 p.m. Effect of Inclusions on Machinability of Carbon Steels for Machine Structural Uses Koji Watari, Junsuke Fujiwara

Topic: Materials and Systems

SYMPOSIUM: CHARACTERIZATION OF METAL MATRIX COMPOSITE MATERIALS

Tuesday, October 27, 2009

Session Title: Nanocomposites and Wear

Room 331 10:40 a.m. Evaluation of Friction and Wear Properties of Ductile Irons (With Nodular Graphite in the Matrix) and Steels Prabhaker Gangasani 11:20 a.m. The Effect of Aging Heat Treatment on the Wear Behavior of Aluminum Bronzes/Stainless Steel Fibers Composites Manal Ramadan, Moustafa Gouda, Abd Elhamed Hussein, El Said El Bana

SYMPOSIUM: ENVIRONMENTAL DEGRADATION AND PROTECTION OF HIGH-TEMPERATURE ALLOYS

Monday, October 26, 2009

Session Title: High-Temperature Oxidation

Room 333 4 p.m. Effects of Carbon Dioxide and Water Vapor on Selective Oxidation of Fe-Cr Alloys Relevant to Oxyfuel Combustion Keeyoung Jung, Nan Mu, Frederick S. Pettit, Gerald H. Meier, Gordon R. Holcomb

Session Title: Fatigue and Fracture

Room 330 2 p.m. Analysis of Criterion for Ductile Crack Initiation of HighStrength Steels Under Cyclic Loading Hitoshi Sueyoshi, Nobuyuki Ishikawa, Mitsuru Ohata 2:20 p.m. Effect of Inclusion Morphology on Fracture Toughness of High-Strength Steels Madhavarao Krishnadev, Claude Lincourt

Tuesday, October 27, 2009

Session Title: New Environmental Challenges on HighTemperature Alloys

Room 333 2 p.m. Corrosion-Resistant Metallic Materials for Ultra-Deep Well Drilling Applications Malgorzata Ziomek-Moroz, David Alman, Jamie Kruzic 2:40 p.m. Corrosion and Corrosion Fatigue of Alloy 718 and NonMagnetic Stainless Steel in Oilfield Jing Xu, Hendrik John, Gabriela Wiese

Steel-Related Papers

SYMPOSIUM: STRUCTURAL MATERIALS FOR AEROSPACE AND DEFENSE: CHALLENGES AND PROSPECTS

2:40 p.m. Modeling Carbon Concentration Profiles in Austenitic Stainless Steels Carburized at Low Temperatures Gary Michal, Xiaoting Gu, Frank Ernst, Arthur H. Heuer, Harold Kahn 4:40 p.m. Non-Equilibrium Quantitative Analysis of New-Type Dynamic Phase Diagram of Mn2 Structural Steel Qinghua Zou

Monday, October 26, 2009

Session Title: Session I

Room 335 11 a.m. Considerations of Material Selection for Small Caliber Gun Barrels Stacey Kerwien

Tuesday, October 27, 2009

Session Title: Process, Process Control, and Properties

Room 412 11 a.m. Investigation on the Heat Treatment Process of Forged Crank Throw for Marine Diesel Engine Seung-Hyoun Nam, Min-Churl Song, Yong-Uk Lee, Young-Cheol Yoon

Topic: Processing and Product Manufacturing

SYMPOSIUM: EMERGING MATERIAL FORMING TECHNOLOGIES

Tuesday, October 27, 2009

Session Title: Session III

Room 414 3:20 p.m. Principles and Applications of Electromagnetic Metal Forming Jianhui Shang, Larry Wilkerson, Steve Hatkevich, Glenn Daehn

SYMPOSIUM: JOINING OF ADVANCED AND SPECIALTY MATERIALS 2009 (JASM XI)

Tuesday, October 27, 2009

Session Title: Welding Metallurgy

Room 411 8 a.m. An Update of Phase Transformations During PWHT of Grade 91 John Siefert, Boian Alexandrov, John Sanders, Jim Tanzosh, John Lippold 8:20 a.m. Effect of Welding Speed on Weld Quality and Microstructure of Tandem Submerged Arc Welded X80 Pipeline Steel Hanan Farhat, Ike Oguocha, Spiro Yannacopoulos 8:40 a.m. Determination of the Critical Temperatures in CSEF Welds Boian Alexandrov, John Lippold, Jonathan Tatman, Vince Arnett 9 a.m. Optimizing the Corrosion Performance of Welds on 6 wt. % Mo Superaustenitic Stainless Steels Andrew Stockdale, John DuPont 9:20 a.m. Predicting the Critical Temperatures in Power Plant Steels Lun Wang, Emel Taban, Boian Alexandrov, John Lippold 10 a.m. Microstructural Evolution and Mechanical Properties of Welds in a New High-Strength Steel for Defense Applications Jeff Farren, John N. DuPont 10:20 a.m. Failure Analysis of Welded Backup Rolls Xuanguo Wang, Binquan Chen, Han-ting Du, Yongxi Huang, Leijun Li 11 a.m. The Effect of Welding Parameters on the Tensile and Impact Properties of SA516 Grade 70 Steel James Amanie, Ikechukwuka Oguocha, Yongxu Yang, Spiro Yannacopoulos

SYMPOSIUM: FORMING OF LIGHTWEIGHT MATERIALS

Tuesday, October 27, 2009

Session Title: Characterization of Automotive Alloys I

Room 413 8:40 a.m. Deformation and Fracture of Advanced High-Strength Steels With Digital Image Correlation Louis Hector 10 a.m. Method for In-Situ Local Measurement of Stresses and Strains in a Sample Under Load Mark Iadicola, Tim Foecke 10:40 a.m. Multi-Axial Deformation of TRIP Steel Adam Creuziger, Mark Iadicola, Thomas Gnaeupel-Herold, Tim Foecke

SYMPOSIUM: FUNDAMENTALS, APPLICATIONS, AND INNOVATIONS IN HEAT TREATMENT

Monday, October 26, 2009

Session Title: Surface Treatment

Room 412 2 p.m. Fundamentals of Gas and Vacuum Carburization Heat Treatments Richard Sisson

11:20 a.m. FEM Simulation of Hardfacing of Steel Rolls Xuanguo Wang, Bingquan Chen, Han-ting Du, Yongxi Huang, Leijun Li

Topic: Special Topics

SYMPOSIUM: DEVELOPMENTS IN WEB-BASED MATERIAL PROPERTY DATABASES, KNOWLEDGE MANAGEMENT OF MATERIALS INFORMATION, AND MATERIALS INFORMATICS

Wednesday, October 28, 2009

Session Title: Surface Modification and Laser Processing

Room 411 11:20 a.m. Preventing Dissimilar Metal Weld Failures: Application of New Functionally Graded Transition Joints Gregory Brentrup, Brett Leister, John N. DuPont

Tuesday, October 27, 2009

Session Title: Materials Data Content and Management

Room 401 9:20 a.m. Advanced Metallic Materials: Diversity in Mechanical Testing Alla Sergueeva, James Zhou, Brian E. Meacham, Daniel J. Branagan 10 a.m. Development of Web-Based Metal Property and Metal Information Databases Bingji Li

Session Title: Friction-Stir Processing

Room 411 2 p.m. Friction Stir Spot Welding of Advanced High-Strength Steels Yuri Hovanski, Michael L. Santella, Glenn Grant

Session Title: Collaborative Computational Systems

Thursday, October 29, 2009

Session Title: Welding of Lightweight Materials

Room 411 8 a.m. Dissimilar Joining Between Steel and Light Metals Through Eutectic Reaction Using Zn Insert Akio Hirose, Takahiro Tachibana, Shinji Hojo, Shingo Iwatani, Tomo Ogura, Shigeyuki Nakagawa, Kenji Miyamoto 10:20 a.m. Weldability, Processing, Microstructure, and Fracture Toughness Relationships in Advanced High-Strength Steel Kip Findley, Stephen Liu, Skylar Cobb, Jacob Davis, Andrew O'Loughlin, Martin Smith 10:40 a.m. Effects of Laser Welding on the Formability of Tailor Welded Blanks Jennifer Li, Sushanta Kumar Panda, Y. Zhou

Room 401 2 p.m. Integrated Computational Materials Engineering: Emerging Tools and Their Impact Tresa Pollock 3:20 p.m. Thermodynamic and Property Data for CALPHAD and Phase Field Calculations Adam Powell

SYMPOSIUM: JOURNAL OF UNDERGRADUATE MATERIALS RESEARCH: UNDERGRADUATE PRESENTATIONS

Tuesday, October 27, 2009

Session Title: JUMR II

Room 402 8:20 a.m. Modeling and Simulation of the Impact Response of Maraging Steel Linear Cellular Alloys for Structural Energetic Material Applications Adam Jakus, David A. Fredenburg, Tammy McCoy, Joe Cochran, Naresh Thadhani 10:40 a.m. The Design of a High-Temperature, Creep-Resistant Heater Rod Laura-Jean I. Lucca, Denton C. Reel, Justin T. Savrock, Nicholas A. Virbinsky, Paul Howell

Session Title: Friction-Stir Processing (Models)

Room 411 2:40 p.m. High Strain Rate/Temperature Experiments Relevant to Friction Stir Welding of HSLA-65 Shweta Dike, Fuping Yuan, Vikas Prakash, John Lewandowski

SYMPOSIUM: MERTON C. FLEMINGS HONORARY SYMPOSIUM: MATERIALS OUT OF THE BOX: ON CROSSING THE THRESHOLD FROM SCIENCE TO INNOVATION

Tuesday, October 27, 2009

Session Title: Industry Perspective

Room 405 2 p.m. Application of Computational Science and Engineering to Continuous Casting of Steel Tooru Matsumiya

Steel-Related Papers

SYMPOSIUM: NATIONAL MATERIALS ADVISORY BOARD DISSEMINATION SERIES

Reversing Design Methodology of Precision Casting Die Profile Based on Simulation Files of ProCAST Yangqing Dou, Kun Bu, Kun Tian, Yiwei Dong Effect of Chromium and Molybdenum on Microstructure and Mechanical Properties of Wear-resistant Steel Li Hongbin A Case History of the Recognition, Investigation, and Prevention of a New Defect Type at Severstal International, and the Demonstration of FeO Lamination Root Cause Originating in a HSM Finishing Stand Olga Kostrubsky, Mark Blankenau Development of Steels with Advanced Damping Properties Zhanar Zumadilova, D. Suleyev, John J. Moore Microstructure and High-Temperature Oxidation Behavior of Aluminium Alloyed Cast Irons Mohammed Kadhim, Adnan Naama Abood, Hijran Zean Al-Abeaden Using Simulated Cooling Profile From Computational Simulation Technique for Chilled Structures Prediction in Thick Section Casting Thanaporn Korad, Umarin Phongsophitanan 3-D Modelings of White Iron Reinforcement in Mottled Iron Castings Thanaporn Korad, Umarin Phongsophitanan Quantitative Analysis of Carbide Evolution Behaviors for 2.25Cr1Mo-0.25V Steel Zhang Yongtao, Miao Lede, Zeng Yu, Zhang Hanqian, Li Jinfu Microstructural Analysis of Hole Expansion Failure in FerriteBainite (FB) Steels Eunji Yu, Sung Ju Kim, Jongryoul Kim Analysis of Microstructure as B Addition and Heat Treatment on 590MPa DP steel Kwon Dong Hee, Moon Man Been, Kim Jong Ryoul Effect of Intercritical Annealing Treatment on Tensile and Impact Properties of X52 and X70 HSLA Steels T. Sahraoui, S. Zidelmel

Monday, October 26, 2009

Session Title: Session I

Room 405 3:20 p.m. Review of the Bureau of Reclamation's Corrosion Prevention Standards for Ductile Iron Pipe David Johnson

SYMPOSIUM: STATUS OF METALS ENGINEERING EDUCATION IN THE UNITED STATES

Wednesday, October 28, 2009

Session Title: Metals in Engineering Curricula

Room 401 2:20 p.m. The Convergence of Science and the Metals Industry in Engineering Curriculum Kalan Kucera, T.J. Balk

Poster Sessions

Tuesday, October 27, 2009

Session Title: Fundamentals and Characterization

Failure Analysis on the Collapse of Leaf Spring Steels During Cold-Punching Wenyi Peng Long-Term Aging Behavior of Stainless Steel Cast Alloys Borivoj Sustarsic, Jelena Vojvodic Tuma, Monika Jenko, Nenad Gubeljak Structural Analysis of Austenitic Stainless Steels After Cavitation Erosion Ghiban Brandusa The Role of Mn Content on Microstructure and Phases of HighAlloyed White Cast Irons Mohammed Kadhim, Adnan Naama Abood, Rabiha Saleh Yassen Sigma Phase Precipitation in a 2205 Duplex Stainless Steel During Aging at 740 and 840C M. Hadji, K. Bettahar Hydrogen Embrittlement Failure in Steel Fasteners Mahesh Darji

Session Title: Materials and Systems

The Corrosion Protective Effectiveness of Metal Coated Steel Reinforcement in Concrete Abdul-Kareem Alsamuraee, Hisham H. Hamid, Harith I. Jaferr, Samir I. Kudadad, Ali S. Faris

Session Title: Processing and Product Manufacturing

Investigation on the Welding Conditions for E911 Heat-Resistant Steel: Welding Heat Input, Microstructure and Impact Toughness of Weld Deposits Honghong Wang An Experimental Investigation in Formabilty of Different Aluminum Allays Reza Vatankhah, Majid Hashemipour Adaptive Network-Based Fuzzy Inference System (ANFIS) for Estimation of Wear Behavior in Sintered Steel Farshid Alambeigi, Hamid Khorsand, Esmaeil Najafi, Mostafa Nazari, Milad Samaee

Session Title: Iron and Steel

Acicular Ferrite Formation and Mechanism Aspects of a HSLA Steel Yantang Chen Degenerate Pearlite and M-A Constituent Formation in the Simulated Coarse-Grained Heat-Affected Zone of a C-Mn HSLA Steel Yantang Chen Development of Penstock Steel With Excellent Weldability for Hydroelectric Power Station Yantang Chen

Steel-Related Papers

Information

71-104.indd

13 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

614359


You might also be interested in

BETA
71-104.indd