Read SERKFP3_layout_607 text version

KFSeriesFBallValves KF Series P3 BallValves

Superior Fluid Control Products

KF Series P3 Trunnion Mounted Ball Valves

A large trunnion design ensures central positioning under the highest working pressure. Independent floating spring loaded seats provide a tight seal even at low differential pressures. Service and maintenance is simplified with a bolted body design incorporating General Design Features · Three-piece body design · Double block and bleed · Trunnion supported design reduces operating torque · Antistatic device for grounding of the ball, stem and body · Two sets of O-rings plus firesafe stem packing prevents leakage · Corrosion resistant low friction bearings · Inconel seat springs · Sealant injection fittings for emergency stem or seal sealing · Direct mount topworks pad for actuator or gear operator · API Spec Q1, 6D, 6FA and 607 · ASME Section III Div. 1-NCA 4000 · BS 5351, 5750 and 6755 · ISO 9001/9002 · CSA- Z245.15-01 · 6" & larger valves are equipped with lifting lugs · Locking device (lock not included) · NACE MR0175 /ISO15156 · Anti-blowout trunnion stem design double O-rings or a combination of O-rings and gaskets, suitable for buried or above ground installation. See page 6 for complete product offering.

NEW: Class 2500 now available. See page 6 for details.

Contents

General Design Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Technical Seating Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Applicable Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Assembly Part Number Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Assembly Part Number Buttweld End Pipe Codes and Calculating Pipe Wall Thickness. . . . . . . . . . . . . . . . . . . . . . . . . . 7 Component Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10 Dimensional Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-15 Topworks & Stem Torque Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17 Engineering Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Weights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

2

KF Series P3 Ball Valves

Design Features

Anti-Blowout Stem Design

Stem seal integrity is achieved by the use of three o-rings (or two o-rings and a graphite gasket). Upper o-ring (or graphite gasket) can be replaced with the valve in line and under pressure.

Emergency Seat Seal

Special sealants may be injected thru fittings that are located on the adapter flanges to restore sealing integrity if seat sealing surface is damaged. A second internal check valve provides backup to the fitting.

Emergency Sealant Injection System

The Sealant Injection System located on the bonnet can be utilized in case of emergencies, o-ring damage, or if stem leakage occurs.

Double Sealed Envelope Connections

Double o-rings or a combination of an o-ring and firesafe gasket on body/adapter connections to ensure positive sealing. This makes the P3 suitable for above or below ground service.

HeavyDutyBearings

Trunnions are supported by heavy duty Teflon® coated Steel Bearings. Thrust load on the ball is supported by large trunnions mounted within captured trunnion blocks, resulting in low operating torque and seat wear.

6"-12" Cl. 900 & 1500 14"-24" Cl.150, 300 & 600

Stem Gland Flange Heavy Duty Bearings* Ball

Ball

Antistatic Device

Heavy Duty Bearings* Trunnion

Heavy Duty Bearings*

A spring between the trunnion and the ball or between the stem and the gland plate permits electrical continuity between all valve components.

*2"-12" Cl. 150, 300 & 600

KF Series P3 Ball Valves

3

Technical Seating Features

Double Piston Seat Design

Upstream Seat: Line Pressure acting on the seat area (A1) does not equalize against the line pressure acting on the seat area (A2). The difference in the area (D1) times the line pressure creates a "piston effect" force which pushes the seat against the ball surface resulting in a tight effective seal.

Upstream Seat PL-Line Pressure D1= A1-A 2 PB=Body Cavity Pressure Downstream Seat PD-Line Pressure D 2 = A4 - A 3

D1 A1 A2 CLOSED BALL

D2 A4 A3

FLOWLINE

Downstream Seat: When the body cavity pressure is greater than the downstream pressure, the body cavity pressure acts on the seal area (A4). The net pressure difference, acting over area (D2), pushes the downstream seat tightly against the ball creating a positive seal.

THE ULTIMATE BENEFIT OF USING THE "DOUBLE PISTON SEAT" DESIGN: In case of upstream seat leakage, the downstream seat maintains a pressure assisted tight shut off by sealing against the ball surface.

Upstream Seat PL-Line Pressure D1= A1-A 2

PB=Body Cavity Pressure

Downstream Seat PD-Line Pressure

Self Relieving Seat Design

Upstream Seat: The difference in the area (D1) times the line pressure creates a "piston effect" which forces the seat against the ball surface. Also the springs behind the seat adds the force to the seat which keeps the seat in contact with the ball surface by providing the tight seal.

D1 A1 A2 CLOSED BALL

D1 A1 A2

FLOWLINE

Downstream Seat: When the body cavity pressure exceeds the spring pressure, automatic pressure relief will occur by relieving the body cavity pressure past the downstream seat. This eliminates the need for the body relief valve.

Double Block and Bleed

The double block and bleed condition is available in all seat design configurations. When the ball is in the closed position the body cavity pressure may be drained down to `zero' by opening the bleed valve and draining the fluid by removing the drain plug. Each seat works independently assuring tight shut off seal against ball on the upstream and downstream side.

Upstream Seat PL-Line Pressure

PB=Body Cavity Pressure Is ZERO Cavity Pressure Is Drained Or Vented To Atmosphere

Downstream Seat PD-Line Pressure

CLOSED BALL

FLOWLINE

4

KF Series P3 Ball Valves

KF Series P3 Applicable Standards

The following list contains the most important applicable standards for ball valves. KF valves may be designed, API-American Petroleum Institute

6D RP6F 6FA 598 605 607 Specification for pipeline valves. Recommended practice for fire testing of valves. Specification for fire testing of valves. Valve inspection and test. Large diameter carbon steel flanges. Fire test for soft seated quarter-turn valves. BS 1560 BS 2080 BS 1504

manufactured and tested in accordance with other international standards on request. British Standard

BS 1503 Specification for steel forgings for pressure purposes. Specification for steel castings for pressure purposes. Steel pipe flanges and flanged fittings. Face-to-face, center-to-face, end-to-end, and center-to-end dimensions of flanged and butt welding end steel valves for the petroleum, petrochemical and allied industries. Flanges and boltings for pipes, valves and fittings. Inspection and test of steel valves for the petroleum, petrochemical and allied industries. Steel ball valves for the petroleum, petrochemical and allied industries. Quality system. Testing of valves.

ASME/ANSI-American National Standard Institute

B 16.5 B 16.10 B 16.25 B 16.34 B 16.47 B 31.3 B 31.4 B 31.8 B 46.1 Steel pipe flanges and flanged fittings. Face-to-face and end-to-end dimensions of ferrous valves. Butt welding ends. Steel valves- Flanged and butt welding ends. Steel Flanges. Chemical plant and petroleum refinery piping Liquid petroleum transportation piping systems. Gas transmission and distribution piping systems. Surface texture. BS 5750 BS 6755 BS 5351 BS 4504

BS 5146

MSS-Manufacturers Standardization Society ASTM-American Society for Testing Materials

Consult factory for details. SP 6 Standard finishes for contact faces of pipe flanges and connecting- end flanges of valves and fittings. Standard marking system for valves, fittings, flanges and unions. Bypass and drain connection standard.

ISO-International Organization for Standardization

ISO 9001: Quality systems-Model for quality assurance 2000 in design/development, production, installation and servicing. ISO 5211 Topworks Mounting Dimensions

SP 25

SP 45

NACE-National Association of Corrosion Engineers

MR0175 Sulfide stress cracking resistant metallic materials for oilfield equipment.

ISO 15156 For use in H2S containing environments in oil and gas production.

KF Series P3 Ball Valves

5

KF Series P3 · Part Number Codes 2" FP- 36" FP, Class 150, 300, 600, 900, 1500 & 2500

NEW: Class 2500 now available.

Consult Factory for more information.

tC gur onfi atio n

Downstream Relieving Seat Configuration 1 · RF 2 · RTJ 3 · WE 4 · RF x WE 5 · RTJ x WE Double Piston Seat Configuration Insert Type F · RF G · RTJ H · WE J · RF x WE K · RTJ x WE

E

nd C

ec onn

tion l

ea &S

We

dW d En

all

kn Thic

ess

99 · No Weld End XX · See Weld Chart page 7. NACE** III, Cl. III Bolting A · A105 /B7 (Black - Std.)* B · SS/B7 (Xylan) C · LF2/L7 (Black) D · SS/ L7 (Xylan) E · LF2 /B7 (Black) L · A105/B7 (Xylan) NACE** II, Cl. II Bolting N · A105/B7M P · SS/B7M (Xylan) Q · SS/L7M (Xylan) R · A105/B7M Cad S · LF2/ L7M T · SS/660SS

l eria Mat ance lting rm /Bo Confo y Bod ACE N Trim se at In rt/F S l

2 · 316SS 3 · 410SS or CA-15M 6 · CS w/ 3 mil ENP (Std. on 2" & larger)* 7 · LTCS (3 mil ENP) A · Devlon® / FS (KF Std.)* B · Teflon® / FS C · PEEKTM / FS 2 · Viton® A 4 · EPDM 5 · AFLAS® A · James Walker Viton® F · ELAST-O-LION 985 G · HNBR (Std.)

Se

Se

at al M Act

eria

uati

on

4 · Locking Handle (Std. on 2" thru 4" bore)* 6 · Locking Gear Operator (Std. on 6" bore and larger)* 9 · Bare Stem A · For Actuator Process Codes (Last two digits used ONLY when Process Codes are required).

Devlon® is a registered trademark of Devol Engineering, Ltd. PEEKTM is a trademark of Victrex Plc. Teflon® is a registered trademark of DuPont. Viton® is a registered trademark of DuPont Dow Elastomers. Aflas® is a registered trademark of Asahi Glass. **Nace indicates compliance to NACE MR0175

Assembly Base Number

VXXX - X XX X X X X X XX

Asterisk ( * ) in lieu of dash ( - ) in Assembly Part Number indicates customer requires source inspection.. (i.e. VXXX * XXXXXXXXXX)

*STANDARD TRIM CONFIGURATION

6 FP V117 V217 V317 V417 V517 V617 8 RP V118 V218 V318 V418 V518 V618 Size (in.) 26 FP V137 V237 V337 V437 -- Size (in.) 8 FP 10 RP V119 V219 V319 V419 V519 V619 V120 V220 V320 V420 V520 V620 10 FP V121 V221 V321 V421 V521 V621 12 RP V122 V222 V322 V422 V522 V622 12 FP V123 V223 V323 V423 V523 V623 14 RP V124 V224 V324 V424 V524 -- 14 FP V125 V225 V325 V425 V525 -- 16 RP V126 V226 V326 V426 V526 --

Series P3 Assembly Base Numbers, 2" FP - 36" FP

Class 150 300 600 900 1500 NEW 2500 Class 150 300 600 900 1500 2 FP V111 V211 V311 V411 V511 V611 3 RP V112 V212 V312 V412 V512 V612 3 FP V113 V213 V313 V413 V513 V613 4 RP V114 V214 V314 V414 V514 V614 4 FP V115 V215 V315 V415 V515 V615 6 RP V116 V216 V316 V416 V516 V616

16 FP V127 V227 V327 V427 V527

18 FP V129 V229 V329 V429 V529

20 RP V130 V230 V330 V430 V530

20 FP V131 V231 V331 V431 V531

22 FP V133 V233 V333 -- --

24 RP V134 V234 V334 V434 --

24 FP V135 V235 V335 V435 V535

28 FP V139 V239 V339 V439 --

30 RP V140 V240 V340 V440 --

30 FP V141 V241 V341 V441 --

32 FP V143 V243 V343 V443 --

34 FP V145 V245 V345 V445 --

36 RP V146 V246 V346 V446 --

36 FP V147 V247 V347 V447 --

Note: Shaded items are not available at this time. (Consult factory for verification)

6

KF Series P3 Ball Valves

KF Series P3 Buttweld End Pipe Code

Pipe Wall Thickness Codes for Assembly Part Number

Pipe Description Outside Dia. (in.) (STD) Standard Schedule 40 XS Schedule 80 Schedule 160 XXS 2 2.375 -- .154 .218 .218 .343 .436 -- 08 15 15 31 37 -- .216 .300 .300 .438 .600 Code 3 3.500 -- 14 24 24 38 44 Code Nominal Pipe Size (in.)/KF Schedule Code 4 Code 6 Code 8 Code 4.500 6.625 8.625 .237 17 .280 22 .322 28 .237 17 .280 22 .322 28 .337 30 .432 36 .500 39 .337 30 .432 36 .500 39 .531 40 .718 49 .906 55 .674 47 .864 53 .875 54 Code 10.750 .365 32 .365 32 .500 39 .593 43 1.125 62 1.000 58 10 Code 12.750 .375 33 .406 35 .500 39 .687 48 1.312 68 1.000 58 12

Pipe Description Outside Dia. (in.) (STD) Standard Schedule 40 XS Schedule 80 Schedule 160 XXS

Code 14.000 .375 33 .438 38 .500 39 .750 50 1.406 70 -- --

14

Code 16.000 .375 33 .500 39 .500 39 .843 52 1.593 75 -- --

16

Size (in.)/KF Schedule Code Code 20 Code 18.000 20.000 .375 33 .375 33 .562 42 .593 43 -- -- -- -- .937 56 1.031 59 1.781 78 1.968 82 -- -- -- -- 18

Code 22.000 .375 33 -- -- 0.500 39 1.125 62 -- -- -- --

22

Code 24.000 .375 33 .687 47 -- -- 1.218 65 2.343 85 -- --

24

Consult factory for other wall thicknesses.

Calculating Pipe Wall Thickness

To find the "Pipe Wall Thickness" for buttweld valves, subtract the Inside Diameter from the "Pipe Outside Diameter" for the appropriate size, listed to the right. Then divide the outcome by two (2). EXAMPLE: For a 4" valve with a 3.826 Inside Diameter: Outside Diameter taken from the chart at right Inside Diameter Given by Customer

Pipe Outside Dia. (O.D.)

Size (in.) 2 3 4 6 8 10 12 14 16 18 20 24 in. 2.375 3.500 4.500 6.625 8.625 10.750 12.750 14.000 16.000 18.000 20.000 24.000 mm 60.33 88.90 114.30 168.28 219.08 273.05 323.85 355.60 406.40 457.20 508.00 609.60

4.500 ­ 3.826 2

= .337

Once you have determined the "Pipe Wall Thickness", find that number in the chart above. The two-digit number to the left should then be used in the "Pipe Wall Thickness" digits of the valve Assembly Part Number. In this example that would be 30.

KF Series P3 Ball Valves

7

KF Series P31 · Component Parts · 2", 3" & 4", Class 600, 900 &1500

26 8 19 24 2 9 18 12 22 20 21 10 30 31 36 5 36 30 25 18 3 28 43 42 14 15 23 7 1 28 11 16 17 6 42 43 29 27 31 30 4 7 21 20 22 12 13 9 2 24

Parts List, KF P3 1

Part No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Description Body Adapter Bonnet Ball Stem Lower Trunnion Seat Assembly Top Cover Seat Springs Stem Bearing Lower Trunnion Bearing Adapter Primary Seal Adapter Sub-Seal Bonnet Primary Seal Bonnet Sub-Seal Lower Trunnion Primary Seal Lower Trunnion Sub-Seal Stem Seal Part No. 19 20 21 22 23 24 25 26 27 28 29 30 31 32 34 36 42 43 Description Stem Sub-Seal Seat Seal Seat Seal Backup Seat Sub-Seal Stud, Body Nut, Body Cap Screw, Bonnet Cap Screw, Top Cover Cap Screw, Lower Trunnion Thrust Bearing Bleed/Drain Valve Injection Fitting Ball Check Drain Plug Key Alignment Pin, Bonnet Antistatic Pin Antistatic Spring

8

KF Series P3 Ball Valves

KF Series P32 · Component Parts · 6"-12", Class 600

8 26 25 24 2 15 9 13 12 31 30 22 20 21 19 36 30 34 5 41 40 36 15 23 7 1 29 11 6 28 16 17 42 43 27 31 30

Part No. 19 20 21 22 23 24 25 26 27 28 29 30 31 32 34 36 42 43 Description Stem Sub-Seal Seat Seal Seat Seal Backup Seat Sub-Seal Stud, Body Nut, Body Cap Screw, Bonnet Cap Screw, Top Cover Cap Screw, Lower Trunnion Thrust Bearing Bleed/Drain Valve Injection Fitting Ball Check Drain Plug Key Alignment Pin, Bonnet Antistatic Pin Antistatic Spring

18 3 28 14 10

4 7 21 20 22 12 13 9 2 24

Parts List, KF P3 2

Part No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Description Body Adapter Bonnet Ball Stem Lower Trunnion Seat Assembly Top Cover Seat Springs Stem Bearing Lower Trunnion Bearing Adapter Primary Seal Adapter Sub-Seal Bonnet Primary Seal Bonnet Sub-Seal Lower Trunnion Primary Seal Lower Trunnion Sub-Seal Stem Seal

KF Series P3 Ball Valves

9

KF Series P33 · Component Parts · 6"-12", Class 900 & 1500 14" & Larger, All Classes

46

6 10 36 26 8 25 2 9 22 20 30 18 5 7 32 28 34 31 30 13 12 24 19 3 15 14 11 10 46 11

46

4 7 12 13 9 2

20 22 6 46 31 30

23

1 29 23 24

Parts List, KF P3 3

Part No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Description Body Adapter Bonnet Ball Stem Trunnion Block Seat Assembly Top Cover Seat Springs Stem Bearing Lower Trunnion Bearing Adapter Primary Seal Adapter Sub-Seal Bonnet Primary Seal Bonnet Sub-Seal Lower Trunnion Primary Seal Lower Trunnion Sub-Seal Part No. 18 19 20 21 22 23 24 25 26 28 29 30 31 32 34 36 46 Description Stem Seal Stem Sub-Seal Seat Seal Seat Seal Backup Seat Sub-Seal Stud, Body Nut, Body Cap Screw, Bonnet Cap Screw, Top Cover Thrust Bearing Bleed/Drain Valve Injection Fitting Ball Check Drain Plug Key Alignment Pin, Bonnet Trunnion Block Pin

10 KF Series P3 Ball Valves

KF Series P3 Class 150 · Dimensional Data (in., mm)

H

I

D

G

C

B

B1

E

A

F

Dimensional Data,14"FP-24"FP, Class 150

Size (in.) in. 14 16 20x16 18 20 24x20 24 27.0 30.0 36.0 34.0 36.0 42.0 42.0 A RTJ mm 686 762 914 864 914 1067 1067 in. mm in. B WE mm in. mm in. mm in. 21.0 23.5 27.5 25.0 27.5 32.0 32.0 mm 533.4 596.9 698.5 635.0 698.5 812.8 813.0 in. 15.7 16.7 16.7 19.1 21.1 21.1 24.3 mm 400.0 423.0 423.0 485.0 537.0 537.0 616.0 in. 15.3 17.7 17.7 19.5 21.4 21.4 23.2 mm 388.0 450.0 450.0 495.0 542.5 542.5 590.5 in. 25.1 28.0 28.0 31.9 34.1 34.1 40.4 mm 638 710 710 810 865 865 1025 in. 18.5 19.4 19.4 22.3 24.3 24.3 27.8 mm 470.0 493.0 493.0 566.0 618.0 618.0 705.0 in. 20.4 18.7 18.7 22.6 22.6 22.6 23.3 mm 518 475 475 575 575 575 592 in. 23.6 27.6 27.6 27.6 27.6 27.6 31.5 mm 600 700 700 700 700 700 800 B1 Dimension (in./mm) C D E F G H I

RF

27.5 698.5 30.0 762 13.3 337.0 13.3 337.0 30.5 775 33.0 838 15.3 387.4 15.3 387.35 36.5 927 39.0 991 15.3 387.4 19.3 489.0 34.5 876 36.0 914 17.2 438.0 17.2 438.0 36.5 927 39.0 991 19.3 489.0 19.3 489.0 42.5 1080 45.0 1143 19.3 489.0 23.3 591.0 42.5 1080 45.0 1143 23.3 591.0 23.3 591.0

KF Series P3 Ball Valves

11

KF Series P3 Class 300 · Dimensional Data (in., mm)

H

I

D

G

C

B

B1

E

A

F

Dimensional Data, 14"FP-24"FP, Class 300

Size (in.) 14 16 20 x16 18 20 24x20 24 A RTJ mm 762 838 991 914 991 1143 1143 in. 30.6 33.6 39.8 36.6 39.8 45.9 45.9 mm 778 854 1010 930 1010 1165 1165 B WE in. 30.0 33.0 39.0 36.0 39.0 45.0 45.0 mm 762 838 991 914 991 1143 1143 in. 13.3 15.3 15.3 17.2 19.3 19.3 23.3 mm 337.0 387.4 387.4 438.0 489.0 489.0 591.0 in. 13.3 15.3 19.3 17.2 19.3 23.3 23.3 mm 337.0 387.4 489.0 438.0 489.0 591.0 591.0 in. 23.0 25.5 30.5 28.0 30.5 36.0 36.0 mm 584.0 648.0 775.0 711.0 774.7 914.0 914.0 in. 15.7 16.7 16.7 19.2 21.2 21.2 24.6 mm 400.0 423.0 423.0 488.0 538.0 538.0 624.0 in. 15.3 16.7 16.7 19.6 21.6 21.6 23.4 mm 388.0 425.0 425.0 498.0 549.0 549.0 593.8 in. 25.1 28.0 28.0 32.3 34.4 34.4 40.9 mm 638 710 710 820 874 874 1040 in. 18.5 19.4 19.4 22.4 24.7 24.7 29.3 mm 470.0 493.0 493.0 569.0 627.0 627.0 744.0 in. 20.4 22.6 22.6 22.6 23.3 23.3 27.3 mm 518 575 575 575 592 592 693 in. 23.6 27.6 27.6 27.6 31.5 31.5 35.4 mm 600 700 700 700 800 800 900 B1 Dimension (in./mm) C D E F G H I

RF in. 30.0 33.0 39.0 36.0 39.0 45.0 45.0

12 KF Series P3 Ball Valves

KF Series P3 Class 600 · Dimensional Data (in., mm)

H

G

I Lever Operated 2"-6" RP D G

C

B

B1

E

A

F

Dimensional Data, 2"FP-36"FP, Class 600

Size (in.) 2 3x2 3 4 x3 4 6x4 6 8x6 8 10x8 10 12x10 12 14x12 16x12 14 16 20x16 18 20 24x20 24 30 36 A RTJ mm 292 356 356 432 432 559 559 660 660 787 787 838 838 889 991 889 991 1194 1092 1194 1397 1397 in. 11.6 14.1 14.1 17.1 17.1 22.1 22.1 26.1 26.1 31.1 31.1 33.1 33.1 35.1 39.1 35.1 39.1 47.2 43.1 47.2 55.4 55.4 mm 295 359 359 435 435 562 562 664 664 791 791 841 841 892 994 892 994 1200 1095 1200 1407 1407 B WE in. 11.5 14.0 14.0 17.0 17.0 22.0 22.0 26.0 26.0 31.0 31.0 33.0 33.0 35.0 39.0 35.0 39.0 47.0 43.0 47.0 55.0 55.0 mm 292 356 356 432 432 559 559 660 660 787 787 838 838 889 991 889 991 1194 1092 1194 1397 1397 in. 2.0 2.0 3.0 3.0 4.1 4.1 6.0 6.0 8.0 8.0 10.0 10.0 12.0 12.0 12.0 13.3 15.3 15.3 17.2 19.3 19.3 23.3 mm 51.0 51.0 76.2 76.2 103.4 103.4 152.4 152.4 203.0 203.0 254.0 254.0 304.8 304.8 304.8 337.0 387.4 387.4 438.0 489.0 489.0 591.0 in. 2.0 3.0 3.0 4.0 4.1 6.0 6.0 8.0 8.0 10.0 10.0 12.0 12.0 13.3 15.3 13.3 15.3 19.3 17.2 19.3 23.3 23.3 mm 51.0 76.2 76.2 101.6 103.3 152.4 152.4 203.2 203.2 254.0 254.0 304.8 304.8 337.0 387.4 337.0 387.4 489.0 438.0 489.0 591.0 591.0 in. 6.5 8.3 8.3 10.7 10.8 14.0 14.0 16.5 16.5 20.0 20.0 22.0 22.0 23.7 27.0 23.7 27.0 32.1 29.3 32.0 37.0 37.0 mm 165.0 210.0 210.0 273.0 273.1 356.0 356.0 419.1 419.1 508.0 508.0 559.0 558.8 603.0 686.0 603.0 686.0 815.0 743.0 812.8 940.0 940.0 in. 6.1 6.1 6.7 6.7 8.0 8.0 9.1 9.1 11.4 11.4 13.0 13.0 15.9 15.9 15.9 15.7 17.4 17.4 19.6 22.2 22.2 24.6 mm 155.0 155.0 170.0 170.0 201.0 201.0 230.0 230.0 290.5 290.5 329.0 329.0 404.7 404.7 404.7 400.0 443.0 443.0 498.0 565.0 565.0 624.5 in. 4.2 4.2 5.4 5.4 6.4 6.4 9.2 9.2 12.4 12.4 15.7 15.7 17.8 17.8 17.8 15.3 17.6 17.6 20.1 21.3 21.3 23.5 mm 106.3 106.3 136.3 136.3 162.3 162.3 234.5 234.5 316.0 316.0 399.0 399.0 451.0 451.0 451.0 388.5 445.8 445.8 510.5 542.0 542.0 596.0 in. 6.5 6.5 9.0 9.0 10.4 10.4 12.6 12.6 17.0 17.0 20.4 20.4 24.5 24.5 24.5 25.1 28.9 28.9 33.1 36.2 36.2 41.1 mm 165 165 229 229 264 264 319 319 432 432 518 518 622 622 622 638 735 735 840 920 920 1045 in. 22.8 22.8 27.6 27.6 27.8 27.8 11.2 11.2 13.5 13.5 15.5 15.5 18.7 18.7 18.7 18.9 20.6 20.6 23.1 27.0 27.0 30.8 mm 580.0 580.0 700.0 700.0 704.9 704.9 285.0 285.0 342.5 342.5 393.0 393.0 474.7 474.7 474.7 481.0 524.0 524.0 587.0 685.0 685.0 781.5 in. -- -- -- -- -- -- 14.2 14.2 15.0 15.0 16.5 16.5 21.5 21.5 21.5 23.1 22.6 22.6 23.3 27.3 27.3 37.4 mm -- -- -- -- -- -- 360 360 380 380 418 418 545 545 545 588 575 575 592 693 693 950 in. -- -- -- -- -- -- 19.7 19.7 23.6 23.6 23.6 23.6 27.6 27.6 27.6 31.5 27.6 27.6 31.5 35.4 35.4 27.6 mm -- -- -- -- -- -- 500 500 600 600 600 600 700 700 700 800 700 700 800 900 900 700 B1 Dimension (in./mm) C D E F G H I

RF in. 11.5 14.0 14.0 17.0 17.0 22.0 22.0 26.0 26.0 31.0 31.0 33.0 33.0 35.0 39.0 35.0 39.0 47.0 43.0 47.0 55.0 55.0

Consult Factory

KF Series P3 Ball Valves

13

KF Series P3 Class 900 · Dimensional Data (in., mm)

H

G

I Lever Operated 2"-6" RP D G

C

B

B1

E

A

F

Dimensional Data, 2"FP-24"FP, Class 900

Size (in.) 2 3x2 3 4 x3 4 6x4 6 8x6 8 10x8 10 12x10 12 14x12 16x12 14 16 18 20 24 in. 14.5 15.0 15.0 18.0 18.0 24.0 24.0 29.0 29.0 33.0 33.0 38.0 38.0 40.5 44.5 40.5 44.5 A RTJ mm 368 381 381 457 457 610 610 737 737 838 838 965 965 1029 1130 1029 1130 in. 14.6 15.1 15.1 18.1 18.1 24.1 24.1 29.1 29.1 33.1 33.1 38.1 38.1 40.9 44.9 40.9 44.9 mm 371 384 384 460 460 613 613 740 740 841 841 968 968 1038 1140 1038 1140 B WE in. 14.5 15.0 15.0 18.0 18.0 24.0 24.0 29.0 29.0 33.0 33.0 38.0 38.0 40.5 44.5 40.5 44.5 mm 368 381 381 457 457 610 610 737 737 838 838 965 965 1029 1130 1029 1130 in. 2.0 2.0 3.0 3.0 4.1 4.1 6.0 6.0 8.0 8.0 10.0 10.0 12.0 12.0 12.0 12.8 14.8 mm 50.8 50.8 76.2 76.2 103.3 103.3 152.4 152.4 203.2 203.2 254.0 254.0 304.8 304.8 304.8 324.0 374.7 in. 2.0 3.0 3.0 4.0 4.1 6.0 6.0 8.0 8.0 10.0 10.0 12.0 12.0 12.8 14.8 12.8 14.8 mm 50.8 76.2 76.2 101.6 103.3 152.4 152.4 203.2 203.2 254.0 254.0 304.8 304.8 324.0 374.7 324.0 374.65 in. 8.5 9.5 9.5 11.5 11.5 15.0 15.0 18.5 18.5 21.5 21.5 24.0 24.0 25.3 27.8 25.3 27.8 mm 215.9 241.3 241.0 292.1 292.0 381.0 381.0 470.0 469.9 546.0 546.0 610.0 609.6 642.0 705.0 641.4 705.5 in. 5.8 5.8 7.0 7.0 8.5 8.5 10.0 10.0 11.7 11.7 13.5 13.5 16.4 16.4 16.4 15.6 18.3 mm 148.5 148.5 179.0 179.0 216.2 216.2 255.0 255.0 296.0 296.0 342.0 342.0 416.0 416.0 416.0 395.0 465.5 in. 4.6 4.6 5.7 5.7 6.9 6.9 10.0 10.0 12.6 12.6 16.0 16.0 18.2 18.2 18.2 16.5 19.4 mm 116.8 116.8 144.3 144.3 176.3 176.3 255.0 255.0 320.0 320.0 406.0 406.0 462.5 462.5 462.5 420.0 491.9 in. 7.3 7.3 9.3 9.3 11.3 11.3 14.2 14.2 17.3 17.3 20.9 20.9 25.4 25.4 25.4 24.8 29.3 mm 185 185 237 237 288 288 360 360 440 440 532 532 645 645 645 630 745 in. 22.8 22.8 27.6 27.6 33.7 33.7 12.1 12.1 14.2 14.2 16.2 16.2 19.6 19.6 19.6 18.7 21.8 mm 580 580 700 700 856.2 856.2 307 307 360 360 412 412 497 497 497 476 554.5 in. -- -- -- -- -- -- 14.8 14.8 21.5 21.5 20.4 20.4 23.1 23.1 23.1 23.1 23.3 mm -- -- -- -- -- -- 377 377 545 545 518 518 588 588 588 588 592 in. -- -- -- -- -- -- 23.6 23.6 27.6 27.6 23.6 23.6 31.5 31.5 31.5 31.5 31.5 mm -- -- -- -- -- -- 600 600 700 700 600 600 800 800 800 800 800 B1 Dimension (in./mm) C D E F G H I

RF

Consult Factory

14 KF Series P3 Ball Valves

KF Series P3 Class 1500 · Dimensional Data (in., mm)

H

G

I Lever Operated 2"-6" RP D G

C

B

B1

E

A

F

Dimensional Data, 2"FP-16"FP, Class 1500

Size (in.) 2 3x2 3 4 x3 4 6x4 6 8x6 8 10x8 10 12x10 12 16 in. 14.3 18.3 18.3 21.2 21.2 27.4 27.4 32.8 32.8 39.0 39.0 44.5 44.5 A RTJ mm 368 470 470 546 546 705 705 832 832 991 991 1130 1130 in. 14.6 18.6 18.6 21.6 21.6 28.0 28.0 33.1 33.1 39.4 39.4 45.1 45.1 mm 371 473 473 549 549 711 711 841 841 1000 1000 1146 1146 B WE in. 14.5 18.5 18.5 21.5 21.5 27.8 27.8 32.8 32.8 39.0 39.0 44.5 44.5 mm 368 470 470 546 546 705 705 832 832 991 991 1130 1130 in. 2.0 2.0 3.0 3.0 4.1 4.1 5.7 5.7 7.6 7.6 9.5 9.5 11.4 mm 50.8 50.8 76.2 76.2 103.3 103.3 146 146 194 194 241 241 289 in. 2.0 3.0 3.0 4.1 4.1 5.7 5.7 7.6 7.6 9.5 9.5 11.4 11.4 mm 50.8 76.2 76.2 103.3 103.3 146.0 146.0 194.0 193.7 241.0 241.3 289.0 289.0 in. 8.5 10.5 10.5 12.2 12.2 15.5 15.5 19.0 19.0 23.0 23.0 26.5 26.5 mm in. 215.9 6.8 266.7 6.8 266.7 8.6 311.0 8.6 311.0 9.2 394.0 9.2 394.0 11.3 483.0 11.3 482.6 13.7 585.0 13.7 585.0 15.6 673.0 15.6 673.0 19.1 Consult factory mm 172.0 172.0 219.0 219.0 234.5 234.5 288.0 288.0 347.0 347.0 397.0 397.0 486.0 in. 5.3 5.3 7.1 7.1 7.8 7.8 11.2 11.2 14.5 14.5 17.9 17.9 20.9 mm 134.3 134.3 180.3 180.3 197.3 197.3 285.0 285.0 369.0 369.0 455.0 455.0 530.0 in. 8.4 8.4 11.8 11.8 13.0 13.0 16.5 16.5 21.2 21.2 24.8 24.8 30.7 mm 214 214 300 300 330 330 420 420 538 538 630 630 780 in. 22.0 22.0 27.6 27.6 39.4 39.4 13.9 13.9 16.4 16.4 18.8 18.8 22.3 mm 558.8 558.8 700 700 1000 1000 352 352 417 417 478 478 567 in. -- -- -- -- -- -- 20.4 20.4 22.6 22.6 23.1 23.1 23.1 mm -- -- -- -- -- -- 518 518 575 575 588 588 588 in. -- -- -- -- -- -- 23.6 23.6 27.6 27.6 31.5 31.5 31.5 mm -- -- -- -- -- -- 600 600 700 700 800 800 800 B1 Dimension (in./mm) C D E F G H I

RF

KF Series P3 Ball Valves

15

KF Series P3 Topworks (in.) & Stem Torque Data (in.-lbs.)

Stem Detail

Flatted Stem · 2"- 6" Sq. Key · 8"- 24" C A W W A N K M D J G F E Center Flow Line

OPEN

Topworks Detail

CLOSED

H · Stud Size I · Hole Dia. L · No. of Holes

B

Dowel Pins: Not Provided By Actuator Supplier

Valve Size (in.)

ANSI Class

H A 0.871 0.871 1.103 1.378 1.378 1.493 1.497 1.497 1.774 1.931 1.992 2.493 2.870 2.870 2.870 3.240 3.240 3.240 3.994 3.994 3.990 3.240 3.240 3.240 3.240 3.240 3.240 4.333 4.333 4.333 4.333 4.333 4.742 4.333 4.323 4.333 4.742 4.333 4.333 4.725 5.741 B -- -- -- -- -- -- -- -- -- -- -- -- 3.191 3.191 3.191 3.613 3.617 3.617 4.426 4.426 4.426 3.613 3.613 3.613 3.613 3.613 3.613 4.749 4.749 4.749 4.749 4.749 5.284 4.749 4.749 4.749 5.284 4.749 4.749 5.257 6.391 C 1.319 1.345 1.988 2.010 2.000 1.973 1.687 1.687 2.402 2.179 1.991 2.795 3.588 3.780 3.299 3.581 3.972 3.775 4.244 4.210 4.210 3.603 3.603 3.603 3.287 3.838 3.838 4.114 4.568 3.996 3.996 3.996 3.267 4.528 4.449 4.382 5.118 4.429 4.429 4.331 6.259 D 3.760 3.858 4.094 4.429 4.941 4.921 5.020 5.020 5.925 4.921 4.921 6.299 6.297 6.496 6.496 6.900 7.096 7.490 8.500 9.051 9.445 8.071 8.071 8.071 7.874 8.228 8.228 8.898 8.543 9.055 9.055 9.055 11.807 9.248 9.248 9.839 11.807 9.248 9.248 11.020 12.386 E 0.709 0.709 1.063 0.787 0.945 1.181 1.220 1.220 1.220 1.299 1.378 1.181 1.732 1.575 1.575 0.986 1.260 1.457 1.319 1.813 1.813 1.299 1.299 1.299 1.457 1.299 1.299 1.299 1.000 1.299 1.299 1.299 1.000 1.000 1.417 1.000 1.000 1.417 1.417 2.362 1.181 F 5.906 5.906 5.906 6.240 6.713 6.693 6.890 6.890 8.268 6.909 8.287 11.811 8.287 11.811 11.811 11.319 11.811 11.811 12.000 13.780 13.780 11.811 11.811 13.780 13.780 11.811 11.811 13.228 13.780 13.228 13.228 13.780 18.701 13.386 13.780 13.780 18.701 13.780 13.780 18.701 18.701 G 4.921 4.921 4.921 5.433 5.433 5.512 5.512 5.512 6.496 5.512 6.496 10.000 6.496 10.000 10.000 10.000 10.000 10.000 10.000 11.732 11.732 10.000 10.000 11.732 11.732 10.000 10.000 11.732 11.732 11.732 11.732 11.732 15.984 11.732 11.732 11.732 15.984 11.732 11.732 15.984 15.984

I J K -- -- -- -- -- -- 0.118 0.118 0.118 0.118 0.118 0.118 0.157 0.157 0.118 0.118 0.118 0.118 0.118 0.199 0.199 0.118 0.118 0.118 0.118 0.118 0.118 0.118 0.118 0.118 0.118 0.118 0.315 0.118 0.118 0.118 0.315 0.118 0.118 0.394 0.118

L

M

N W *0.558 *0.558 *0.746 *0.994 *0.994 *0.993 *0.996 *0.996 *1.247 *1.247 *1.247 *1.747 0.750 0.750 0.750 0.875 0.875 0.875 1.000 1.000 1.000 0.875 0.875 0.875 0.875 0.875 0.875 1.000 1.000

Stud Sz. Hole UNC Dia.

1/2 -13 0.531 1/2 -13 0.531

No. Of C. Line Bore Holes Bore Depth

Max Stem Break SheerTorq. Torq. ft.-lbs. in.-lbs.

Torq.Express. (1) For P<=2160 PSI in.-lbs. (2)(3)

2 2 2 3 3 3 4 4 4 6 6 6 8 8 8 10 10 10 12 12 12 14 14 14 14 16 16 16 16 16 18 18 18 18 20 20 20 20 24 24 24 24

30 36

600 900 1500 600 900 1500 600 900 1500 600 900 1500 600 900 1500 600 900 1500 600 900 1500 150 300 600 900 150 300 600 900 1500 150 300 600 900 150 300 600 900 150 300 600 900

600 600

-- -- 1/2 -13 0.531 -- 1/2 -13 0.531 -- 1/2 -13 0.531 -- 5/8-11 0.657 -- 5/8-11 0.657 3.939 5/8-11 0.657 3.939 3/4-10 0.787 5.120 5/8-11 0.657 3.939 3/4-10 0.787 5.120 5/8-11 0.669 7.880 3/4-10 0.787 5.120 5/8-11 0.669 7.877 5/8-11 0.669 7.877 5/8-11 0.657 7.877 5/8-11 0.657 7.877 5/8-11 0.669 7.877 5/8-11 0.657 7.877 3/4-10 0.787 9.057 3/4-10 0.787 9.057 5/8-11 0.657 7.875 5/8-11 0.657 7.875 3/4-10 0.787 9.057 3/4-10 0.827 9.057 5/8-11 0.657 7.875 5/8-11 0.657 7.875 3/4-10 0.787 9.057 3/4-10 0.787 9.057 Consult Factory 3/4-10 0.787 9.057 3/4-10 0.787 9.057 3/4-10 0.787 9.057 1 1/2-8 1.575 11.819 3/4-10 0.787 9.057 3/4-10 0.787 9.057 3/4-10 0.787 9.057 1 1/2-8 1.575 11.819 3/4-10 0.787 9.057 3/4-10 0.787 9.057 1 1/2-8 1.575 11.819 1 1/2-8 1.575 11.817 Consult Factory

4 4 4 4 4 4 4 4 4 4 4 8 4 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

0.787 0.787 0.787 -- 0.807 1.024 0.984 0.984 1.181 1.000 1.181 -- 1.165 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

0.512 0.512 0.551 -- 0.500 0.650 0.630 0.630 0.787 0.669 0.787 -- 0.787 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

134 1314 135 1616 306 2224 405 4151 630 5452 726 8062 725 6043 728 7759 1337 11,203 1624 14,580 1695 20,090 3722 31,147 7460 22,628 7460 31,164 7460 48,293 10,631 29,042 10,631 39,699 10,631 61,086 20,315 34,639 20,315 46,923 20,315 71,574 7444 25,000 7444 37,886 10,631 58,843 10,631 79,800 10,631 33,602 10,631 50,655 26,103 78,390 26,103 106,125 45,663 74,210 120,637 167,065 57,608 99,405 167,381 235,357 110,228 174,487 278,997 383,508

0.409*P+ 708.20 1.758*P+ 1548.75 2.319*P+ 2610.75 7.446*P+ 3559.47 11.535*P+ 5556.03 14.402*P+ 7726.94 16.6*P+ 10071.30 28.32*P+ 16929.17

37.48*P+ 22919.73

1.000 26,103 1.000 26,103 1.000 26,103 1.250 60,984 1.000 26,103 1.000 26,103 1.000 26,103 1.250 60,984 1.000 26,103 1.000 26,103 1.250 33,100 1.500 108,306

62.74*P+ 27781.92 91.86*P+ 31428.12

141.23*P+ 69976.95

* Stem with Double 'D' Flat Style

Note: (1) Torque at maximum differential pressure are tabulated (2) Torques expressions are suggested for other differential pressure (3) Differential pressure "P" in torque expressions is in PSI

Pressure ratings are according to API 6D/ASME 16.34 Class 150 P = 285 Class 900 P = 2220 Class 300 P = 740 Class 1500 P = 3705 Class 600 P = 1480

16 KF Series P3 Ball Valves

KF Series P3 Topworks (mm) & Stem Torque Data (Nm)

Stem Detail

Flatted Stem · 2"- 6" Sq. Key · 8"- 24" C A W W A N K M D J G F E Center Flow Line

OPEN

Topworks Detail

CLOSED

H · Stud Size I · Hole Dia. L · No. of Holes

B

Dowel Pins: Not Provided By Actuator Supplier

Valve Size (in.)

ANSI Class

H A 22.1 22.1 28.0 35.0 35.0 37.9 38.0 38.0 45.1 49.0 50.6 63.3 72.9 72.9 72.9 82.3 82.3 82.3 101.4 101.4 101.3 82.3 82.3 82.3 82.3 82.3 82.3 110.1 110.1 110.1 110.1 110.1 120.4 110.1 109.8 110.1 120.4 110.1 110.1 120.0 145.8 B -- -- -- -- -- -- -- -- -- -- -- -- 81.1 81.1 81.1 91.8 91.9 91.9 112.4 112.4 112.4 91.8 91.8 91.8 91.8 91.8 91.8 120.6 120.6 120.6 120.6 120.6 134.2 120.6 120.6 120.6 134.2 120.6 120.6 133.5 162.3 C 33.5 34.2 50.5 51.1 50.8 50.1 42.9 42.9 61.0 55.3 50.6 71.0 91.1 96.0 83.8 91.0 100.9 95.9 107.8 106.9 106.9 91.5 91.5 91.5 83.5 97.5 97.5 104.5 116.0 101.5 101.5 101.5 83.0 115.0 113.0 111.3 130.0 112.5 112.5 110.0 159.0 D 95.5 98.0 104.0 112.5 125.5 125.0 127.5 127.5 150.5 125.0 125.0 160.0 159.9 165.0 165.0 175.3 180.2 190.2 215.9 229.9 239.9 205.0 205.0 205.0 200.0 209.0 209.0 226.0 217.0 230.0 230.0 230.0 299.9 234.9 234.9 249.9 299.9 234.9 234.9 279.9 314.6 E 18.0 18.0 27.0 20.0 24.0 30.0 31.0 31.0 31.0 33.0 35.0 30.0 44.0 40.0 40.0 25.0 32.0 37.0 33.5 46.1 46.1 33.0 33.0 33.0 37.0 33.0 33.0 33.0 25.4 33.0 33.0 33.0 25.4 25.4 36.0 25.4 25.4 36.0 36.0 60.0 30.0 F 150.0 150.0 150.0 158.5 170.5 170.0 175.0 175.0 210.0 175.5 210.5 300.0 210.5 300.0 300.0 287.5 300.0 300.0 304.8 350.0 350.0 300.0 300.0 350.0 350.0 300.0 300.0 336.0 350.0 336.0 336.0 350.0 475.0 340.0 350.0 350.0 475.0 350.0 350.0 475.0 475.0 G 125 125 125 138 138 140 140 140 165 140 165 254 165 254 254 254 254 254 254 298 298 254 254 298 298 254 254 298 298 298 298 298 406 298 298 298 406 298 298 406 406

I J K -- -- -- -- -- -- 3.0 3.0 3.0 3.0 3.0 3.0 4.0 4.0 3.0 3.0 3.0 3.0 3.0 5.0 5.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 8.0 3.0 3.0 3.0 8.0 3.0 3.0 10.0 3.0

L

M

N W *14.17 *14.17 *18.95 *25.25 *25.25 *25.22 *25.30 *25.30 *31.67 *31.67 *31.67 *44.37 19.05 19.05 19.05 22.23 22.23 22.23 25.40 25.40 25.40 22.23 22.23 22.23 22.23 22.23 22.23 25.40 25.40 25.40 25.40 25.40 31.75 25.40 25.40 25.40 31.75 25.40 25.40 31.75 38.10

Stud Sz. Hole UNC Dia.

1/2-13 1/2-13

No. Of C. Line Bore Holes Bore Depth

Max Stem SheerTorq. Nm

Break Torq. Nm

Torq.Express. (1) For P<=10.21 MPa-Nm (2)(3)

2 2 2 3 3 3 4 4 4 6 6 6 8 8 8 10 10 10 12 12 12 14 14 14 14 16 16 16 16 16 18 18 18 18 20 20 20 20 24 24 24 24 30 36

600 900 1500 600 900 1500 600 900 1500 600 900 1500 600 900 1500 600 900 1500 600 900 1500 150 300 600 900 150 300 600 900 1500 150 300 600 900 150 300 600 900 150 300 600 900 600 600

13.5 -- 13.5 -- 1/2-13 13.5 -- 1/2-13 13.5 -- 1/2-13 13.5 -- 5/8-11 16.7 -- 5/8-11 16.7 100.1 5/8-11 16.7 100.1 3/4-10 20.0 130.0 5/8-11 16.7 100.1 3/4-10 20.0 130.0 5/8-11 17.0 200.2 3/4-10 20.0 130.0 5/8-11 17.0 200.1 5/8-11 17.0 200.1 5/8-11 16.7 200.1 5/8-11 16.7 200.1 5/8-11 17.0 200.1 5/8-11 16.7 200.1 3/4-10 20.0 230.0 3/4-10 20.0 230.0 5/8-11 16.7 200.0 5/8-11 16.7 200.0 3/4-10 20.0 230.0 3/4-10 21.0 230.0 5/8-11 16.7 200.0 5/8-11 16.7 200.0 3/4-10 20.0 230.0 3/4-10 20.0 230.0 Consult Factory 3/4-10 20.0 230.0 3/4-10 20.0 230.0 3/4-10 20.0 230.0 1 1/2-8 40.0 300.2 3/4-10 20.0 230.0 3/4-10 20.0 230.0 3/4-10 20.0 230.0 11/2-8 40.0 300.2 3/4-10 20.0 230.0 3/4-10 20.0 230.0 11/2-8 40.0 300.2 11/2-8 40.0 300.2 Consult Factory

4 4 4 4 4 4 4 4 4 4 4 8 4 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

20.0 20.0 20.0 -- 20.5 26.0 25.0 25.0 30.0 25.4 30.0 -- 29.6 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

13.0 13.0 14.0 -- 12.7 16.5 16.0 16.0 20.0 17.0 20.0 -- 20.0 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

181.7 183.0 414.9 549.1 854.2 984.3 983.0 987.0 1812.7 2201.8 2298.1 5046.4 10,114.4 10,114.4 10,114.4 14,413.7 14,413.7 14,413.7 27,543.4 27,543.4 27,543.4 10,092.7 10,092.7 14,413.7 14,413.7 14,413.7 14,413.7 35,390.9 35,390.9

148.45 182.70 251.12 469.13 616.34 910.47 682.99 877.18 1265.17 1648.00 2271.52 3517.32 2557.74 3523.65 5453.58 3282.72 4488.71 6898.33 3915.37 5305.41 8082.77 2822.50 4284.35 6651.16 9022.61 3793.60 5728.29 8860.63 11,999.11

6.702*P+ 80.022 28.808*P+ 175 38.001*P+ 295 122.018*P+ 402.2 189.024*P+ 627.8 236.006*P+ 873.101 272.024*P+ 1138 464.080*P+ 1912.901

614.185*P+ 2589.8

35,390.9 5154.32 1028.12*P+ 35,390.9 8392.89 3139.2 35,390.9 13,636.31 82,683.2 18,890.00 35,390.9 6501.61 1505.31*P+ 35,390.9 11,243.33 3551.2 35,390.9 18,920.42 82,683.2 26,612.55 35,390.9 12,443.10 2314.336*P+ 35,390.9 19,733.26 7907 44,877.6 31,536.37 146,843.2 43,362.63

Note: (1) Torque at maximum differential pressure are tabulated (2) Torques expressions are suggested for other differential pressure (3) Differential pressure "P" in torque expressions is in MPa

Pressure ratings are according to API 6D/ASME 16.34 Class 150 P = 1.96 Class 900 P = 15.32 Class 300 P = 5.11 Class 1500 P = 25.53 Class 600 P = 10.21

* Stem with Double 'D' Flat Style

KF Series P3 Ball Valves

17

KF Series P3 Engineering Data

Flow Coefficient (C v)

Size (in.) 2 3x2 3 4x3 4 6x4 6 8x6 8 10 x 8 10 12 x 10 12 14 x 12 16 x 12 14 16 x 14 16 20 x 16 18 20 24 x 20 22 24 285 psi -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 32,600 14,780 44,700 14,870 57,825 74,775 26,768 91,789 113,284 740 psi -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30,900 14,750 42,600 14,860 56,225 71,800 26,755 88,537 109,414 Cv Value 1480 psi 350 190 1000 560 1850 800 4400 2150 8450 4500 14,250 8000 22,790 13,990 -- 28,600 14,720 39,250 14,850 57,410 65,463 25,698 81,305 98,963 2220 psi 320 185 910 505 1760 730 4300 2010 8400 4160 14,160 7300 21,230 -- -- 26,600 14,690 36,600 14,830 48,665 62,239 26,659 -- 93,993 3705 psi 330 187 830 510 1660 742 4167 2033 8013 4051 13,309 7117 17,073 -- -- 24,276 14,247 33,215 14,795 43,402 55,931 -- -- 83,926

Method of Calculating Flow

The Flow Coefficient "Cv" of a valve is the flow rate of water (gallons/minute) through a fully opened valve, with a pressure drop of 1 psi across the valve. To find the flow of liquid through valve from the Cv, use the following formulas:

Liquid Flow

QL = flow rate of liquid (gal./min.) P = differential pressure across the valve (psi) G = specific gravity of liquid (for water, G=1)

P QL=Cv G

Gas Flow

Qg = flow rate of gas (CFH at STP) P2 = outlet pressure (psia) g = Specific gravity of gas (for air, g=1.000)

Qg=61Cv

P2 P g

For non-critical flow P <1.0 P2

{

}

Note: Consult factory for sizes not shown.

Body & Trim Materials

Part Body/Adapter Ball/Stem Seat Material A105, LF2, F316SS F316SS or CS+3 mil ENP Devlon®, Teflon®, PEEKTM

Pressure Temperature Chart (Carbon Steel )

6500 6000 Class 2500

Nylon/Buna N & LT Buna N, EPDM*

5000

PEE

Differential Pressure-PSI

Pressure Rating (psig)

Material A105, LF2 F316 ANSI Cl.150 ANSI Cl. 300 ANSI Cl. 600 ANSI Cl. 900 ANSI Cl.1500 285 740 1480 2220 3705 275 720 1440 2160 3600

K

TM

Dev

4000 Class 1500 3000 Class 900 2000 Class 600

lon

®

V

Viton®, Viton® GF, JW Viton®

Aflas®, EPDM**

HNBR

Low Temperature Limits

Body Material A105 LF2 F316 °F -20 -50 -50 °C -29 -46 -46 Seat Material Devlon V PEEKTM Teflon® Seal Material Viton® HNBR °F -50 -50 -50 °F -20 -40 °C -46 -46 -46 °C -29 -40

Tef

lon ®

***

1000 Class 300 Class 150 0 100 200

Temperature-°F

300

400

500

600

* Chemical Service ** Water & Steam service only *** Teflon® not offered for Class 1500.

18 KF Series P3 Ball Valves

KF Series P3 Weights

Valve Size (in.) 2 2 2 2 3 3 3 3 3 3 3 4 4 4 4 4 4 4 6 6 6 6 6 6 6 8 8 8 8 8 8 8 10 10 10 10 10 10 10 12 12 12 12 12 12 12 Port FP FP FP FP RP FP RP FP RP FP RP/ FP RP FP RP FP RP FP RP/ FP RP FP RP FP RP FP RP/ FP RP FP RP FP RP FP RP/ FP RP FP RP FP RP FP RP/ FP RP FP RP FP RP FP RP/ FP Weight (lbs.) ANSI Valve With GOP Class Only Handle Wt. 600 900 1500 2500 600 600 900 900 1500 1500 2500 600 600 900 900 1500 1500 2500 600 600 900 900 1500 1500 2500 600 600 900 900 1500 1500 2500 600 600 900 900 1500 1500 2500 600 600 900 900 1500 1500 2500 81 114 169 96 160 147 216 210 386 216 286 288 385 485 617 368 498 529 762 816 1157 604 992 912 1344 1356 2149 1256 1653 1499 2010 2628 3440 1834 2535 2226 2865 4156 4012 86 38 118 54 173 54 Consult Factory 101 38 168 54 152 54 223 54 214 54 390 45 Consult Factory 223 54 295 45 296 54 395 45 494 45 -- 81 Consult Factory 377 45 -- 84 538 45 -- 92 -- 81 -- 115 Consult Factory -- 84 -- 90 -- 92 -- 112 -- 115 -- 196 Consult Factory -- 90 -- 115 -- 112 -- 198 -- 196 -- 300 Consult Factory -- 115 -- 288 -- 198 -- 299 -- 300 -- 300 Consult Factory Weight (kg) With GOP 119 168 223 134 214 201 270 264 431 270 331 342 430 530 698 413 582 574 854 897 1272 688 1082 1004 1456 1471 2345 Valve With GOP Only Handle Wt. 37 52 77 44 73 67 98 95 175 98 130 131 175 220 280 167 226 240 346 370 525 274 450 414 610 615 975 39 18 54 25 79 25 Consult Factory 46 18 76 25 69 25 101 25 97 25 179 21 Consult Factory 101 25 134 21 134 25 179 21 224 21 -- 37 Consult Factory 171 21 -- 38 244 21 -- 42 -- 37 -- 53 Consult Factory -- 38 -- 41 -- 42 -- 51 -- 53 -- 89 Consult Factory -- 41 -- 53 -- 51 -- 90 -- 89 -- 136 Consult Factory -- 53 -- 131 -- 90 -- 136 -- 136 -- 136 Consult Factory With GOP 55 77 101 62 98 92 123 120 196 123 151 156 196 241 317 188 264 261 388 407 577 312 491 456 661 668 1064 611 803 731 1002 1281 136 885 1281 1100 1436 2021 1956 Valve Size (in.) Port Weight (lbs.) ANSI Valve With GOP Class Only Handle Wt. Weight (kg) With GOP Valve With GOP Only Handle Wt. 90 90 131 131 90 90 90 90 88 131 133 90 216 382 133 133 216 382 90 131 133 216 293 382 382 382 131 216 131 382 382 395 382 395 With GOP 898 1170 1261 1501 1605 820 1360 1148 1390 1511 1853 1880 2301 4643 1458 2235 2821 3383 1300 2311 2360 2760 2464 3163 3353 4743 2555 3700 2882 3993 3773 5895 5963 7426

1346 570 1768 750 1611 680 2208 912 2824 1192 3740 1560 1949 2823 2424 3164 4456 4312 832 1150 1010 1300 1885 1820

14 FP 150 1781 -- 198 1979 808 -- 14 FP 300 2380 -- 198 2578 1080 -- 14 RP 600 2491 -- 288 2779 1130 -- 14 FP 600 3020 -- 288 3308 1370 -- 14 FP 900 3339 -- 198 3537 1515 -- 16 RP 150 1610 -- 198 1808 730 -- 16 FP 150 2799 -- 198 2997 1270 -- 16 RP 300 2332 -- 198 2530 1058 -- 16 FP 300 2870 -- 194 3064 1302 -- 16 RP 600 3042 -- 288 3330 1380 -- 16 FP 600 3791 -- 293 4084 1720 -- 16 RP 900 3947 -- 198 4145 1790 -- 16 FP 900 4596 -- 476 5072 2085 -- 16 FP 1500 9393 -- 842 10,235 4261 -- 18 FP 150 2921 -- 293 3214 1325 -- 18 FP 300 4634 -- 293 4927 2102 -- 18 FP 600 5742 -- 476 6218 2605 -- 18 FP 900 6614 -- 842 7456 3001 -- 20 RP 150 2667 -- 198 2865 1210 -- 20 FP 150 4805 -- 289 5094 2180 -- 20 RP 300 4909 -- 293 5202 2227 -- 20 FP 300 5608 -- 476 6084 2544 -- 20 RP 600 4785 -- 646 5431 2170 -- 20 FP 600 6130 -- 842 6972 2781 -- 20 RP 900 6549 -- 842 7391 2971 -- 20 FP 900 9614 -- 842 10,456 4361 -- 24 RP 150 5343 -- 289 5632 2424 -- 24 FP 150 7680 -- 476 8156 3484 -- 24 RP 300 6063 -- 289 6352 2751 -- 24 FP 300 7960 -- 842 8802 3611 -- 24 RP 600 7475 -- 842 8317 3391 -- 24 FP 600 12,125 -- 870 12,995 5500 -- 24 RP 900 12,303 -- 842 13,145 5581 -- 24 FP 900 15,500 -- 870 16,370 7031 -- Note: All weights listed are estimated. Consult factory for sizes not shown.

Note: Consult factory for sizes not shown.

KF Series P3 Ball Valves

19

Worldwide Sales Offices

KF Industries, a leading brand of CIRCOR Energy Products, Inc. reaches into every corner of the globe serving the oil & gas and industrial marketplace. Supplying an extensive range of product offerings through a worldwide network of manufacturer representatives and distributors, KF Industries is the right choice for all your flow control needs.

World Headquarters

KF Industries 1500 S.E. 89th Street Oklahoma City, OK 73149 USA Phone: (405) 631-1533 Fax: (405) 631-5034 E-mail: [email protected] www.circorenergy.com

US Industrial

KF Contromatics Industrial Products 1500 S.E. 89th Street Oklahoma City, OK 73149 USA Phone: (405) 631-1533 Fax: (405) 631-5034 E-mail: [email protected] www.circorenergy.com

Canada

KF Industries Canada 9430-39th Avenue, Edmonton Alberta, Canada T6E 5T9 Phone: (780) 463-8633 Fax: (780) 461-1588 E-mail: [email protected] www.circorenergy.com

Licensed for Manufacture in accordance with API 6A & 6D and Firetest to API 6FA and 607

Registered to the ISO 9001 Quality System Standard, accredited by U.K., Dutch and German qualifying authorities.

www.circorenergy.com

KF-P3-Oct-07-HP · ©2007 CIRCOR Energy Products, Inc. · KF Industries is a Brand of CIRCOR Energy Products, Inc. · KF reserves the right to change designs, materials or specifications without notice or without obligation to furnish or install such changes on products previously or subsequently sold. · Viton® is a registered trademark of DuPont Dow Elastomers. · Teflon® is a registered trademark of DuPont. · PEEKTM is a trademark of Victrex Plc.· Devlon® is a registered trademark of Devol Engineering, Ltd. · Aflas® is a registered trademark of Asahi Glass.

Information

SERKFP3_layout_607

20 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

486108