Read AKRON Product Catalog 2-07.cdr text version

The Akron Products Company

MONO POSTS

FLOOR JACKS

ANCHOR POSTS

MOBILE

HOME

JACKS

WINDOW WELLS

AKRON

The AkronProductsCompany

®

AKRON

®

BIG MOE FLOOR JACK

All Steel · Adjustable · Easy To Install

[email protected] 20,000tension Max. Ex [email protected] *38,000ension t Min. Ex

Adjusting Screw - SAE

To: Tested

DESIGNED FOR REMODELING PROJECTS

Galvanized Top Swivel Plate with Positive Locating Hole Anchors Screw Adjustment Flush Adjusting Steel Nut With Self Centering Pilot Into Tube Which Helps Prevent Lateral Movement

Immersion Dipped for Heavy Coating Inside and Out to Prevent Corrosion

BIG MOE

Extra Stre Where Yo ngth u Need It Most!

Inside Tube is 11 Guage Heavy Duty High Carbon Steel, With Adjusting Holes 3" Apart

8' 4"

Extra Strength Zinc Coated Nut & Screw

Designed for Heavy Load Areas

4' 8"

Outside Tube is 11 Guage Heavy Duty High Carbon Steel

Compression strength: Min Adj: 38,000 lbs · Max Adj: 20,000 lbs

Model # BIG MOE

2 Tubes 2 Plates 1 Screw

lb 20,000tension Max. Ex

Galvanized Bottom Plate - Embossed to Prevent Dishing and Movement of Post

o: Tested T [email protected]

Adjustment 4' 8" to 8' 4"

Weight 31 lbs.

2 ¾" x 11 Gauge (Outside Tube) 2 ½" x 11 Gauge (Inside Tube) 4" x 6" - 3 Gauge, Galvanized

1 ¼" O.D. 8 Pitch "V" Thread 2 ½" tapped for a 1 ¼" 8 pitch thread 1 Nut 2 Carriage Bolts + Nuts

AKRON

The AkronProductsCompany

®

© 2007 The Akron Products Company - FLOOR-MONO207

10721 South Water Street Ext. · Meadville, PA 16335 · Phone: 814-336-2201 · Fax: 814-336-2804 · visit us online @ www.akronproducts.com

AKRON

®

FLOOR JACKS

All Steel · Adjustable · Easy To Install

Galvanized Top Swivel Plate - Embossed to Prevent Dishing.

Adjusting Screw SAE

DESIGNED FOR REMODELING PROJECTS

Model #

C-84 C-79 C-2 C-3 C-4 No. 84 Mobile Home Jack

Adjustment

4' 8" - 8' 4" 4' 6" - 7' 9" 2' 10" - 4' 7" 1' 7" - 3' 1' - 1' 3" 4' 8" - 8' 4" 12" - 16"

Weight

18 lbs. 16 lbs. 11 lbs. 8 lbs. 4 lbs. 22 lbs. 9 lbs.

Compression Strength

9,100 [email protected] Max. Extension 11,350 [email protected] Max. Extension 14,000 [email protected] Max. Extension 16,000 [email protected] Max. Extension 18,000 [email protected] Max. Extension 11,300 [email protected] Max. Extension 18,000 [email protected] Min. Extension 18,000 [email protected] Max. Extension

Flush Adjusting Steel Nut With Pilot Into Tube Which Provides Extra Safety Against Accidental Side Pressure.

Inside Tube is Heavy Duty High Carbon Steel, With Adjusting Holes 3" Apart.

Double Carriage Bolt & Nut for Added Safety!

NOTE: Compression strength is testing to the point of failure. To determine Safe or Allowable loads consult a licensed engineer.

Outside Tube is Heavy Duty High Carbon Steel.

Crawl Spaces, Porches and Decks

Immersion Dipped for Heavy Coating Inside and Out to Prevent Corrosion.

Heavy Load Areas

Under Stairs

Galvanized Bottom Plate - Embossed to Prevent Dishing and Movement of Post.

· Place extra beam against joists below heavy fireplace. Hold in place with two AKRON JACKS · Substitute steel AKRON JACKS for rotted wooden posts usually found at junction of main beams · Steel AKRON JACKS give support at butt or lap joints in main supporting beams · Heat often affects floors. Use an extra cross beam above furnace...support with two AKRON JACKS · Reinforce flooring under pianos, refrigerators or other heavy objects with beam supported by steel AKRON JACKS · Frequent plaster cracks around stair wells indicate need for extra steel AKRON JACKS as indicated.

MOBILE

HOME

JACKS

·Stabilizes trailer when parked ·Stores easily, sets up quickly

AKRON

m djusts fro A

12 to 16

© 2007 The Akron Products Company - FLOOR-MONO207

The AkronProductsCompany

®

10721 South Water Street Ext. · Meadville, PA 16335 · Phone: 814-336-2201 · Fax: 814-336-2804 · visit us online @ www.akronproducts.com

AKRON

®

MONO POSTS

DESIGNEDFOR NEWHOMECONSTRUCTION

Fully Assembled · Self-Contained Unit · No Loose Parts.

M Series: 1Plate: 4¼" x 7½" x 3 Gauge

H Series: 1 Plate: 4 ¼" x 7 ¼" x 3 Gauge

Bottom Plate 1 Plate (Swivel): 4" x 5½" x 3 Gauge

M SERIES

Coating Finished with corrosion resistant powder coating that exceeds ASTM-B117-85 2 Plates 1 Plate (Swivel) 4" x 5½" x 3 Gauge, 1 Plate 4¼" x 7½" x 3 Gauge 1 Tube 3" O.D., 11 Gauge (Also Available in 3 ½" and 4" Diameter) 1 Screw 1¼" O.D. 7 Pitch "V" Thread With 4" Adjustment 1 Nut 3" O.D. Tapped for 1¼" 7 Pitch Thread Strength Refer to Current ICC-ES Report

H SERIES

Coating Finished with corrosion resistant powder coating that exceeds ASTM-B117-85 2 Plates 1 Plate 4¼" x 7¼" x 3 Gauge, 1 Plate (Swivel) 4" x 5½" x 3 Gauge 1 Tube 3" O.D., 11 Gauge (Also Available in 3½" and 4" Diameter) 1 Screw 1¼" O.D. 7 Pitch "V" Thread With 4" Adjustment 1 Nut 3" O.D. Tapped for 1¼" 7 Pitch Thread Strength Refer to Current ICC-ES Report

-1767 ICC-ESR s with e

O One person can install in less than 5 minutes. Adjust screw to approximate length needed between beam and f footer, where the MONO-POST is to be positioned. Set MONO-POST in a perpendicular position between f footer and beam. Make additional screw adjustment until the post is firmly in position. Additional adjustments m mpli ilding may be made during construction to keep floor level. Poured concrete floor locks MONO-POST adjustment Co p permanently. 11 gauge MONO-POST are available in 3, 3 ½, & 4 inch OD. The 3 & 3 ½ inch models are C Bu 2006 IC ode m manufactured in 3" increments up to 10'-10' 4", while the 4" OD columns maximum is 12' 3"-12' 7". Schedule 40 C M MONO-POST are also available up to 12' 1". Tamper proof adjustment...MONO-POST must be positioned w with adjustment nut and screw at the footer, according to ICC-ES regulations.

WINDOW WELLS

37" wide,16" projection accomodates 35" to 40" width

· Made of 22 Gauge Galvanized Steel · Deep Corrugations for Extra Strength · Top Fully Rolled for Rigidity and Safety · Wide Pre-Punched Flat Mounting Flanges · Easily and Quickly Installed · Single Piece Construction up to 36" Height · No Welding on Any Models · Designed to Provide More Daylight

37" wide, 13" projection

Standard Heights (approx.): 12", 15", 18", 24", 30", 36" Standard package: 5 per bundle

Round

AKRON

Square

The AkronProductsCompany

®

© 2007 The Akron Products Company - FLOOR-MONO207

10721 South Water Street Ext. · Meadville, PA 16335 · Phone: 814-336-2201 · Fax: 814-336-2804 · visit us online @ www.akronproducts.com

FLOOR JACKS

Model #

BIG MOE #84 C-84 C-79 C-2 C-3 C-4 Mobile Home Jack

2 3/4" O.D. Lower, 2 1/2" O.D. Upper; 1/4" x 4" x 6" Plates

Adjustment Range

4 ft. 8 in. - 8 ft. 4 in. / 56"-100" 4 ft. 8 in. - 8 ft. 4 in. / 56"-100" 4 ft. 8 in. - 8 ft. 4 in. / 56"-100" 4 ft. 6 in. - 7 ft. 9 in. / 54"-93" 2 ft. 10 in. - 4 ft. 7 in. / 34"-55" 1 ft. 7 in. - 3 ft. 0 in. / 19"-36" 1 ft. 0 in. - 1 ft. 3 in. / 12"-15" 1 ft. 0 in. - 1 ft. 4 in. / 12"-16"

UPC

7-16733-12841-5

Max. Ext. Load Ctn. Weight

Unit Cube

20,000 lbs. 31 lbs. .51 2-3/4" O.D. Lower, 2-1/2" O.D. Upper; 3/32" x 4" x 5" Plates 7-16733-11840-9 11,300 lbs. .50 22 lbs. 2-1/2" O.D. Lower, 2 1/4" O.D. Upper, 3/32" x 4" x 5" Plates 7-16733-13840-7 18 lbs. 9,100 lbs. .48 7-16733-13790-5 16 lbs. 11,350 lbs. .41 7-16733-13020-3 11 lbs. 14,000 lbs. .25 7-16733-13030-2 8 lbs. 16,000 lbs. .16 7-16733-13040-1 4 lbs. 18,000 lbs. .14 7-16733-90001-1 9 lbs. 18,000 lbs. .55

MONO POSTS

Manufacturing Specifications

Model #

200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316

ICC-ESR-1767 - Complies with 2006 ICC Building Code

New 11 gauge, carbon steel tubing, minimum yield strength of 33,000 psi. complies with ASTM A500. Meets all FHA/HUD requirements. Finished with corrosion resistant coating that exceeds ASTM-B117-85. One year limited warranty.

Model: 3" O.D., 11 Gauge Std: Tube End Plate; "M" Series: 4¼" x 7½" x 3 Ga. / "H" Series: 4¼" x 7¼" x 3 Ga. - Adj./Swivel End Plate 4" x 5½" x 3 Ga.

Adjustment Range

6 ft. 0 in. - 6 ft. 4 in. / 72"- 76" 6 ft. 3 in. - 6 ft. 7 in. / 75"- 79" 6 ft. 6 in. - 6 ft. 10 in. / 78"- 82" 6 ft. 9 in. - 7 ft. 1 in. / 81"- 85" 7 ft. 0 in. - 7 ft. 4 in. / 84"- 88" 7 ft. 3 in. - 7 ft. 7 in. / 87"- 91" 7 ft. 6 in. - 7 ft. 10 in. / 90"- 94" 7 ft. 9 in. - 8 ft. 1 in. / 93"- 97" 8 ft. 0 in. - 8 ft. 4 in. / 96"- 100" 8 ft. 3 in. - 8 ft. 7 in. / 99"- 103" 8 ft. 6 in. - 8 ft. 10 in. / 102"- 106" 8 ft. 9 in. - 9 ft. 1 in. / 105"- 109" 9 ft. 0 in. - 9 ft. 4 in. / 108"- 112" 9 ft. 3 in. - 9 ft. 7 in. / 111"- 115" 9 ft. 6 in - 9 ft. 10 in. / 114"- 118" 9 ft. 9 in. - 10 ft. 1 in. / 117"- 121" 10 ft. 0 in. - 10 ft. 4 in. / 120"- 124" 6 ft. 0 in. - 6 ft. 4 in. / 72"- 76" 6 ft. 3 in. - 6 ft. 7 in. / 75"- 79" 6 ft. 6 in. - 6 ft. 10 in. / 78"- 82" 6 ft. 9 in. - 7 ft. 1 in. / 81"- 85" 7 ft. 0 in. - 7 ft. 4 in. / 84"- 88" 7 ft. 3 in. - 7 ft. 7 in. / 87"- 91" 7 ft. 6 in. - 7 ft. 10 in. / 90"- 94" 7 ft. 9 in. - 8 ft. 1 in. / 93"- 97" 8 ft. 0 in. - 8 ft. 4 in. / 96"- 100" 8 ft. 3 in. - 8 ft. 7 in. / 99"- 103" 8 ft. 6 in. - 8 ft. 10 in. / 102"- 106" 8 ft. 9 in. - 9 ft. 1 in. / 105"- 109" 9 ft. 0 in. - 9 ft. 4 in. / 108"- 112" 9 ft. 3 in. - 9 ft. 7 in. / 111"- 115" 9 ft. 6 in - 9 ft. 10 in. / 114"- 118" 9 ft. 9 in. - 10 ft. 1 in. /117"- 121" 10 ft. 0 in. - 10 ft. 4 in. / 120"- 124"

UPC - "M" Series

7-16733-31200-5 7-16733-31201-2 7-16733-31202-9 7-16733-31203-6 7-16733-31204-3 7-16733-31205-0 7-16733-31206-7 7-16733-31207-4 7-16733-31208-1 7-16733-31209-8 7-16733-31210-4 7-16733-31211-1 7-16733-31212-8 7-16733-31213-5 7-16733-31214-2 7-16733-31215-9 7-16733-31216-6 7-16733-71200-3 7-16733-71201-0 7-16733-71202-7 7-16733-71203-4 7-16733-71204-1 7-16733-71205-8 7-16733-71206-5 7-16733-71207-2 7-16733-71208-9 7-16733-71209-6 7-16733-71210-2 7-16733-71211-9 7-16733-71212-6 7-16733-71213-3 7-16733-71214-0 7-16733-71215-7 7-16733-71216-4

Design Load

13,933 lbs. 13,641 lbs. 13,345 lbs. 13,044 lbs. 12,740 lbs. 12,432 lbs. 12,122 lbs. 11,810 lbs. 11,497 lbs. 11,183 lbs. 10,868 lbs. 10,554 lbs. 10,240 lbs. 9,928 lbs. 9,617 lbs. 9,309 lbs. 9,003 lbs. 17,564 lbs. 17,296 lbs. 17,022 lbs. 16,742 lbs. 16,457 lbs. 16,167 lbs. 15,873 lbs. 15,576 lbs. 15,274 lbs. 14,970 lbs. 14,662 lbs. 14,353 lbs. 14,042 lbs. 13,729 lbs. 13,416 lbs. 13,101 lbs. 12,787 lbs.

Weight

28 lbs. 29 lbs. 30 lbs. 31 lbs. 32 lbs. 33 lbs. 34 lbs. 35 lbs. 35 lbs. 36 lbs. 37 lbs. 38 lbs. 39 lbs. 40 lbs. 41 lbs. 42 lbs. 43 lbs. 33 lbs. 34 lbs. 35 lbs. 36 lbs. 37 lbs. 38 lbs. 39 lbs. 40 lbs. 41 lbs. 42 lbs. 44 lbs. 45 lbs. 46 lbs. 47 lbs. 48 lbs. 49 lbs. 50 lbs.

Unit Cube

1.37 1.42 1.48 1.53 1.57 1.64 1.70 1.75 1.81 1.86 1.92 1.97 2.03 2.08 2.14 2.20 2.25 1.37 1.42 1.48 1.53 1.59 1.64 1.70 1.75 1.81 1.86 1.92 1.97 2.03 2.08 2.14 2.20 2.25

Model: 3½" O.D., 11 Gauge

Std: Tube End Plate; "M" Series: 4¼" x 7½" x 3 Ga. / "H" Series: 4¼" x 7¼" x 3 Ga. - Adj./Swivel End Plate 4" x 5½" x 3 Ga.

AKRON

The AkronProductsCompany

®

© 2007 The Akron Products Company - FLOOR-MONO207

10721 South Water Street Ext. · Meadville, PA 16335 · Phone: 814-336-2201 · Fax: 814-336-2804 · visit us online @ www.akronproducts.com

MONO POSTS (cont.)

Manufacturing Specifications

Model #

400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 300-40 301-40 302-40 303-40 304-40 305-40 306-40 307-40 308-40 309-40 310-40 311-40 312-40 313-40 314-40 315-40 316-40

ICC-ESR-1767 - Complies with 2006 ICC Building Code

New 11 gauge, carbon steel tubing, minimum yield strength of 33,000 psi. complies with ASTM A500. Meets all FHA/HUD requirements. Finished with corrosion resistant coating that exceeds ASTM-B117-85. One year limited warranty.

Std: Tube End Plate; "M" Series: 4¼" x 7½" x 3 Ga. / "H" Series: 4¼" x 7¼" x 3 Ga. - Adj./Swivel End Plate 4" x 5½" x 3 Ga.

Model: 4 in. O.D., 11 Gauge

Adjustment Range

6 ft. 0 in. - 6 ft. 4 in. / 72"- 76" 6 ft. 3 in. - 6 ft. 7 in. / 75"- 79" 6 ft. 6 in. - 6 ft. 10 in./ 78"- 82" 6 ft. 9 in. - 7 ft. 1 in. / 81"- 85" 7 ft. 0 in. - 7 ft. 4 in. / 84"- 88" 7 ft. 3 in. - 7 ft. 7 in. / 87"- 91" 7 ft. 6 in. - 7 ft. 10 in. / 90"- 94" 7 ft. 9 in. - 8 ft. 1 in. / 93"- 97" 8 ft. 0 in. - 8 ft. 4 in. / 96"- 100" 8 ft. 3 in. - 8 ft. 7 in. / 99"- 103" 8 ft. 6 in. - 8 ft. 10 in. / 102"- 106" 8 ft. 9 in. - 9 ft. 1 in. / 105"- 109" 9 ft. 0 in. - 9 ft. 4 in. / 108"- 112" 9 ft. 3 in. - 9 ft. 7 in. / 111"- 115" 9 ft. 6 in. - 9 ft. 10 in. / 114" - 118" 9 ft. 9 in. - 10 ft. 1 in. /117" - 121" 10 ft. 0 in. - 10 ft. 4 in. /120" - 124" 10 ft. 3 in. - 10 ft. 7 in. /123" - 127" 10 ft. 6 in. - 10 ft. 10 in. / 126" - 130" 10 ft. 9 in. - 11 ft. 1 in. / 129" - 133" 11 ft. 0 in. - 11 ft. 4 in. / 132" - 136" 11 ft. 3 in. - 11 ft. 7 in. / 135" - 139" 11 ft. 6 in. - 11 ft. 10 in. / 138" - 142" 11 ft. 9 in. - 12 ft. 1 in. / 141" - 145" 12 ft. 0 in. - 12 ft. 4 in. / 144" - 148" 12 ft. 3 in. - 12 ft. 7 in. / 147" - 151" 6 ft. 0 in. - 6 ft. 4 in. / 72"- 76" 6 ft. 3 in. - 6 ft. 7 in. / 75"- 79" 6 ft. 6 in. - 6 ft. 10 in. / 78"- 82" 6 ft. 9 in. - 7 ft. 1 in. / 81"- 85" 7 ft. 0 in. - 7 ft. 4 in. / 84"- 88" 7 ft. 3 in. - 7 ft. 7 in. / 87"- 91" 7 ft. 6 in. - 7 ft. 10 in. / 90"- 94" 7 ft. 9 in. - 8 ft. 1 in. / 93"- 97" 8 ft. 0 in. - 8 ft. 4 in. / 96"- 100" 8 ft. 3 in. - 8 ft. 7 in. / 99"- 103" 8 ft. 6 in. - 8 ft. 10 in. / 102"- 106" 8 ft. 9 in. - 9 ft. 1 in. / 105"- 109" 9 ft. 0 in. - 9 ft. 4 in. / 108"- 112" 9 ft. 3 in. - 9 ft. 7 in. / 111"- 115" 9 ft. 6 in - 9 ft. 10 in. / 114"- 118" 9 ft. 9 in. - 10 ft. 1 in. / 117"- 121" 10 ft. 0 in. - 10 ft. 4 in. / 120"- 124"

UPC - "M" Series

7-16733-41400-6 7-16733-41401-3 7-16733-41402-0 7-16733-41403-7 7-16733-41404-4 7-16733-41405-1 7-16733-41406-8 7-16733-41407-5 7-16733-41408-2 7-16733-41409-9 7-16733-41410-5 7-16733-41411--2 7-16733-41412-9 7-16733-41413-6 7-16733-41414-3 7-16733-41415-0 7-16733-41416-7 7-16733-41417-4 7-16733-41418-1 7-16733-41419-8 7-16733-41420-4 7-16733-41421-1 7-16733-41422-8 7-16733-41423-5 7-16733-41424-2 7-16733-41425-9 7-16733-61200-6 7-16733-61201-3 7-16733-61202-0 7-16733-61203-7 7-16733-61204-4 7-16733-61205-1 7-16733-61206-8 7-16733-61207-5 7-16733-61208-2 7-16733-61209-9 7-16733-61210-5 7-16733-61211-2 7-16733-61212-9 7-16733-61213-6 7-16733-61214-3 7-16733-61215-0 7-16733-61216-7

Design Load

21,105 lbs. 20,860 lbs. 20,608 lbs. 20,351 lbs. 20,087 lbs. 19,818 lbs. 19,544 lbs. 19,265 lbs. 18,981 lbs. 18,693 lbs. 18,401 lbs. 18,105 lbs. 17,806 lbs. 17,504 lbs. 17,200 lbs. 16,893 lbs. 16,584 lbs. 16,273 lbs. 15,961 lbs. 15,648 lbs. 15,334 lbs. 15,020 lbs. 14,705 lbs. 14,391 lbs. 14,077 lbs. 13,763 lbs. 29,370 lbs. 28,892 lbs. 28,404 lbs. 27,906 lbs. 27,400 lbs. 26,886 lbs. 26,364 lbs. 25,837 lbs. 25,304 lbs. 24,766 lbs. 24,224 lbs. 23,679 lbs. 23,131 lbs. 22,582 lbs. 22,032 lbs. 21,482 lbs. 20,932 lbs.

Weight

37 lbs. 38 lbs. 40 lbs. 41 lbs. 42 lbs. 43 lbs. 45 lbs. 46 lbs. 47 lbs. 48 lbs. 50 lbs. 51 lbs. 52 lbs. 53 lbs. 55 lbs. 56 lbs. 57 lbs. 58 lbs. 60 lbs. 61 lbs. 62 lbs. 63 lbs. 64 lbs. 66 lbs. 67 lbs. 68 lbs. 52 lbs. 54 lbs. 56 lbs. 58 lbs. 60 lbs. 62 lbs. 64 lbs. 65 lbs. 67 lbs. 69 lbs. 71 lbs. 73 lbs. 75 lbs. 77 lbs. 79 lbs. 81 lbs. 83 lbs.

Unit Cube

1.37 1.42 1.48 1.53 1.59 1.64 1.70 1.75 1.81 1.86 1.92 1.97 2.03 2.08 2.14 2.20 2.25 2.31 2.36 2.42 2.47 2.53 2.58 2.64 2.69 2.75 1.37 1.42 1.48 1.53 1.59 1.64 1.70 1.75 1.81 1.86 1.92 1.97 2.03 2.08 2.14 2.20 2.25

Model: Schedule 40 Series Std: 3½" O.D. Tube, End Plate; "M" Series: 4¼" x 7½" x 3 Ga. / "H" Series: 4¼" x 7¼" x 3 Ga. - Adj./Swivel End Plate 4" x 5½" x 3 Ga.

AKRON

The AkronProductsCompany

®

© 2007 The Akron Products Company - FLOOR-MONO207

10721 South Water Street Ext. · Meadville, PA 16335 · Phone: 814-336-2201 · Fax: 814-336-2804 · visit us online @ www.akronproducts.com

Fixed Length Columns

3" Outside Diameter 11 Gauge

Model #

311060 311063 311066 311069 311070 311073 311076 311079 311080 311083 311086 311089 311090 311093 311096 311099 311100 311120

ICC-ESR-1767 - Complies with 2006 ICC Building Code

Allowable Concentric Axial Loads With 2.5 Safety Factor. Standard: "M" Plates ( 4¼" x 7½")

Manufacturing New 11 gauge, C1010-C1020 HR carbon steel tubing, minimum yield strength of 33,000 psi. complies with ASTM A500. Meets all FHA/HUD requirements. Finished with corrosion resistant coating that exceeds ASTM-B117-85. One year limited warranty. Specifications

Height UPC Design Load Weight Weight

7-16733-30600-3 14,313 lbs. 26 lbs. 1.33 6 ft. 0 in. (72") 7-16733-30630-1 14,058 lbs. 27 lbs. 1.38 6 ft. 3 in. (75") 7-16733-30660-8 13,739 lbs. 28 lbs. 1.44 6 ft. 6 in. (78") 7-16733-30690-5 13,447 lbs. 29 lbs. 1.49 6 ft. 9 in (81") 7-16733-30700-1 13,145 lbs. 30 lbs. 1.55 7 ft. 0 in. (84") 7-16733-30730-8 12,845 lbs. 31 lbs. 1.60 7 ft. 3 in. (87") 7-16733-30760-5 12,535 lbs. 32 lbs. 1.66 7 ft. 6 in. (90") 7-16733-30790-2 12,230 lbs. 32 lbs. 1.72 7 ft. 9 in. (93") 7-16733-30800-9 11,914 lbs. 33 lbs. 1.77 8 ft. 0 in. (96") 7-16733-30830-5 11,606 lbs. 34 lbs. 1.83 8 ft. 3 in. (99") 7-16733-30860-2 11,288 lbs. 35 lbs. 1.88 8 ft. 6 in. (102") 7-16733-30890-9 10,978 lbs. 36 lbs. 1.94 8 ft. 9 in. (105") 7-16733-30900-5 10,659 lbs. 37 lbs. 1.99 9 ft. 0 in. (108") 7-16733-30930-2 10,350 lbs. 38 lbs. 2.05 9 ft. 3 in. (111") 7-16733-30960-9 10,032 lbs. 39 lbs. 2.10 9 ft. 6 in. (114") 7-16733-30990-6 9,726 lbs. 40 lbs. 2.16 9 ft. 9 in. (117") 7-16733-31000-1 9,411 lbs. 41 lbs. 2.21 10 ft. 0 in. (120") 7-16733-30120-7 7,054 lbs. 48 lbs. 2.66 12 ft. 0 in. (144") 3½" Outside Diameter 11 Gauge Allowable Concentric Axial Loads With 2.5 Safety Factor. Standard: "M" Plates ( 4¼" x 7½")

3511060 3511066 3511070 3511076 3511080 3511086 3511090 3511096 35110100 35110120 411060 411066 411070 411076 411080 411086 411090 411096 4110100 4110120

6 ft. 0 in. (72") 6 ft. 6 in. (78") 7 ft. 0 in. (84") 7 ft. 6 in. (90") 8 ft. 0 in. (96") 8 ft. 6 in. (102") 9 ft. 0 in. (108") 9 ft. 6 in. (114") 10 ft. 0 in. (120") 12 ft. 0 in. (144") 6 ft. 0 in. (72") 6 ft. 6 in. (78") 7 ft. 0 in. (84") 7 ft. 6 in. (90") 8 ft. 0 in. (96") 8 ft. 6 in. (102") 9 ft. 0 in. (108") 9 ft. 6 in. (114") 10 ft. 0 in. (120") 12 ft. 0 in. (144")

7-16733-50600-9 7-16733-50660-3 7-16733-50700-6 7-16733-50760-0 7-16733-50800-9 7-16733-50860-7 7-16733-50900-0 7-16733-50960-4 7-16733-50100-4 7-16733-50120-2

17,911 lbs. 17,386 lbs. 16,836 lbs. 16,264 lbs. 15,675 lbs. 15,071 lbs. 14,456 lbs. 13,834 lbs. 13,206 lbs. 10,710 lbs.

30 lbs. 32 lbs. 34 lbs. 36 lbs. 38 lbs. 41 lbs. 43 lbs. 45 lbs. 47 lbs. 56 lbs.

1.33 1.44 1.55 1.66 1.77 1.88 1.99 2.10 2.21 2.66

4" Outside Diameter 11 Gauge

Standard: "M" Plates ( 4¼" x 7½") Allowable Concentric Axial Loads With 2.5 Safety Factor. 34 lbs. 1.33 7-16733-40600-1 21,421 lbs. 36 lbs. 7-16733-40660-5 20,942 lbs. 1.44 39 lbs. 7-16733-40700-8 20,437 lbs. 1.55 41 lbs. 7-16733-40760-2 19,908 lbs. 1.66 44 lbs. 7-16733-40800-5 19,358 lbs. 1.77 46 lbs. 7-16733-40860-9 18,789 lbs. 1.88 49 lbs. 7-16733-40900-2 18,204 lbs. 1.99 51 lbs. 7-16733-40960-6 17,605 lbs. 2.10 54 lbs. 7-16733-41000-8 16,996 lbs. 2.21 64 lbs. 7-16733-41200-2 14,496 lbs. 2.66

Area Walls

Made of 22 Gauge Galvanized Steel · Deep Corrugations for Extra Strength · Top Fully Rolled for Rigidity and Safety · Wide Pre-Punched Flat Mounting Flanges Model # Height/Style UPC Bundle Weight Unit Cube Model # Height/Style Bundle Weight Unit Cube UPC 5 33 lbs. 3.85 31 lbs. 4.63 AW S12 12" Square 7-16733-90012-7 5 AW R12 12" Round 7-16733-90120-9 5 38 lbs. 4.82 43 lbs. 5.78 AW S15 15" Square 7-16733-90015-8 5 AW R15 15" Round 7-16733-90150-6 5 41 lbs. 5.78 45 lbs. 6.94 AW S18 18" Square 7-16733-90018-9 5 AW R18 18" Round 7-16733-90180-3 5 63 lbs. 7.71 59 lbs. 9.25 AW S24 24" Square 7-16733-90024-0 5 AW R24 24" Round 7-16733-90240-4 5 74 lbs. 9.64 72 lbs. 11.56 AW S30 30" Square 7-16733-90030-1 5 AW R30 30" Round 7-16733-90300-5 5 95 lbs. 11.56 81 lbs. 13.88 AW S36 36" Square 7-16733-90036-3 5 AW R36 36" Round 7-16733-90360-9 5 125 lbs. 15.42 125 lbs. 18.50 AW S48 48" Square 7-16733-90048-6 5 AW R48 48" Round 7-16733-90480-4 10 35 lbs. 2.24 12" Vent 12" Round 7-16733-91200-7

AKRON

The AkronProductsCompany

®

© 2007 The Akron Products Company - FLOOR-MONO207

10721 South Water Street Ext. · Meadville, PA 16335 · Phone: 814-336-2201 · Fax: 814-336-2804 · visit us online @ www.akronproducts.com

AKRON

®

FLOOR JACKS

Floor Jack Installation Instructions

Fig.4

Fig. 1 Fig. 2

1. Place flat side of one plate on footing. Put large diameter post on plate with holes on top. (Fig. 1) 2. Insert small diameter post inside large post. For maximum height, position small diameter post with holes at bottom. Reverse for shorter applications. (Fig. 2) 3. Turn round nut to top of threads on adjustment screw. Place adjustment screw on top of small diameter post. Tapered side of nut will fit into small diameter post with the shoulder resting on top of post. (Fig. 3) 4. Lift small diameter post to highest possible position. Align holes in posts. Place two bolts through holes and secure with nuts. (Fig. 4) 5. Place plate on top of screw with flat side up. Use 3/4" open end or adjustable wrench to complete adjustment. (Fig. 5) NOTE: MAKE SURE POST IS EXACTLY VERTICAL. Secure plates with proper nails, screws, or bolts. NOTE: For best support under wooden structures place large diameter tube and plate directly under beam. (Fig. 6) To correct sagging floors,Place beam under joists, hold in place with two AKRON Floor Jacks. Adjust floor jacks onehalf turn each week over several weeks.

Fig. 5

Fig. 3

WOODEN STRUCTURES

Other uses for AKRON Floor Jacks

Crawl Spaces, Porches and Decks

Stairs

Heavy Load Areas

AKRON

The AkronProductsCompany

®

© 2007 The Akron Products Company - FLOOR-MONO207

10721 South Water Street Ext. · Meadville, PA 16335 · Phone: 814-336-2201 · Fax: 814-336-2804 · visit us online @ www.akronproducts.com

AKRON

®

FLOOR JACKS

1. Colocar la cara plana de una de las placas sobre el lugar de apoyo. Colocar el poste de diámetro grande sobre la placa, con los agujeros en la parte superior. (Fig. 1) 2. Insertar el poste de diámetro pequeño dentro del poste grande. Para la altura máxima, posicionar el poste de diámetro pequeño con los agujeros en la parte inferior. Invertir para aplicaciones más cortas. (Fig. 2) 3. Girar la tuerca hasta el extremo de la rosca en el tornillo de ajuste. Colocar el tornillo de ajuste sobre el poste de diámetro pequeño. El lado de menor diámetro de la rosca calzará dentro del poste de diámetro pequeño y el reborde superior quedará apoyado sobre la parte superior del poste. (Fig. 3) 4. Levantar el poste de diámetro pequeño hasta la posición más alta. Alinear los agujeros en los postes. Colocar dos bulones a través de los agujeros y asegurarlos con tuercas. (Fig. 4) 5. Colocar la placa sobre el tornillo con la cara plana hacia arriba. Utilizar una llave de boca fija de ¾" o ajustable para terminar de ajustar. (Fig. 5) NOTA: ASEGURARSE DE QUE LA POSICIÓN DEL POSTE SEA PERFECTAMENTE VERTICAL. Asegurar las placas con los clavos, tornillos, o bulones adecuados. NOTA: Para un mejor soporte debajo de estructuras de madera, colocar el tubo de diámetro mayor y la placa directamente debajo del tirante. Para corregir pisos hundidos, colocar un tirante debajo de las vigas, sostener en su lugar con dos gatos de piso AKRON. Ajustar los gatos de piso medio giro por semana durante varias semanas.

Otros usos para gatos de piso AKRON

Fig.4

Instrucciones de instalación para gato de piso

Fig. 1 Fig. 2

Fig. 5

Fig. 3

WOODEN STRUCTURES

Espacios debajo del piso, porches y plataformas

Escaleras

Áreas con mucho peso

AKRON

The AkronProductsCompany

®

© 2007 The Akron Products Company - FLOOR-MONO207

10721 South Water Street Ext. · Meadville, PA 16335 · Phone: 814-336-2201 · Fax: 814-336-2804 · visit us online @ www.akronproducts.com

AKRON

®

FLOOR JACKS

1. Placez le côté lisse d'un plat sur le pavement. Mettez le poteau au large diamètre sur le plat avec les trous en haut. (Fig. 1) 2. Insérez le poteau au petit diamètre au-dedans du large poteau. Pour une hauteur maximum, placez le poteau au petit diamètre avec les trous en bas. Reverser la position pour les utilisations plus courtes. (Fig. 2) 3. Tournez autour de l'écrou au-dessus des fils de la vis de réglage. Placez la vis de réglage sur le poteau de petit diamètre. Le côté conique de l'écrou se logera dans le poteau au petit diamètre avec l'épaulement restant positionné audessus du poteau. (Fig. 3) 4.Placez le plat sur la vis, avec le côté lisse vers le haut. Utilisez l'extrémité ouverte de 3/4" ou la clé réglable pour compléter l'ajustement. (Fig. 4) 5. Placez le plat sur la vis, avec le côté lisse vers le haut. Utilisez l'extrémité ouverte de 3/4" ou la clé réglable pour compléter l'ajustement. (Fig. 5) ATTENTION: Assurez-vous QUE LE POTEAU EST EXACTEMENT VERTICAL. Sécurisez les plats avec les clous, les vis ou les boulons appropriés. NOTE: Pour un meilleur appui sous les structures en bois, placez le tube et le plat de grand diamètre directement sous le balancier. (Fig. 6) Pour corriger l'affaissement des pavements, placez le balancier sous les poutrelles et tenez-le en place à l'aide des deux crics rouleurs AKRON. Ajustez les crics rouleurs un demi-tour chaque semaine pendant plusieurs semaines.

Autres usages pour les crics rouleurs AKRON.

Fig.4

Instructions pour l'installation des crics rouleurs

Fig. 1 Fig. 2

Fig. 5

Fig. 3

WOODEN STRUCTURES

Vides Sanitaires, Vérandas et Terrasses

Escaliers

Surfaces surchargées

AKRON

The AkronProductsCompany

®

© 2007 The Akron Products Company - FLOOR-MONO207

10721 South Water Street Ext. · Meadville, PA 16335 · Phone: 814-336-2201 · Fax: 814-336-2804 · visit us online @ www.akronproducts.com

Information

AKRON Product Catalog 2-07.cdr

10 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

251078


Notice: fwrite(): send of 199 bytes failed with errno=104 Connection reset by peer in /home/readbag.com/web/sphinxapi.php on line 531