Read Microsoft Word - Upgrade-W98-XP.doc text version

POWER JET Plotter Reference Manual

UPGRADING FROM WINDOWS 98 to WINDOWS XP 1) Switch the plotter OFF. 2) Substitute the main control board with the `Upgrade Control Board'. - verify that the new board has `IRQ Jumper 09' set as illustrated below (refer to arrow). - The 2 pins on the LEFT should be free, while the 2 RIGHT pins should be sheathed by the plastic covers.

3) Run `F-Disk'. - insert the Win 98 floppy disk that was included with the original plotter accessories; - Switch the plotter ON. - choose `Start without CD support'; - at the DOS prompt A:\> type fdisk - choose `enable large disk' (V); - delete the `Primary DOS partition'. 4) Press the `ESC' key to exit the F-Disk dialogue. 5) Insert the Windows XP installation CD in the plotter's CD drive. 6) In the CMOS setup, for the `Set boot sequence' option choose CD ROM. 7) Verify that the RAM installed on the plotter's PC is at least 128 Mb.

POWER JET Plotter Reference Manual

8) Choose `NTFS ­ Normal Partition'. 9) Begin the main installation for `Windows XP'. When installation is complete, remove the `Windows XP' CD. 10) Reset the `Touch Screen' resolution: - click `Start', `Control Panel' `System' `Hardware' `Device Manager' `Display Adaptors' 2 click `Video Type' click `Advanced' button Adaptor `List All Modes' choose `640 x 480 with `True Color', 32 bit ­ 60 Hz click OK. 11) Install the `Algotex Driver'. Insert the `Algotex' CD in the plotter's CD drive. Choose `Windows 2K- XP' Installer 2 click the `Inst-msi.exe' file. Exit the installation dialogue. 12) Set the IRQ address: - click `Start', `Control Panel' `System' `Hardware' `Device Manager' `Algo Plotter' `Properties' `Resources' `Set Configuration Manually' Select `IRQ' . Set the IRQ value to 09 . Click OK. 13) Install the plotting programs. On the `Algotex' CD, 2 click the directory `AlgoPlotter' 2 click the `AlgoPlotter.msi file. 14) After the plotting program installation is complete, 2 click the directory `Ambiente e Config' (Environment and Configuration) located on the CD. Copy the following files from the CD to the `Algotex' directory on the C:\ drive: - `Coda.cod' , `Log.log' , `Power-L700.cfg', `Power-V700.cfg'. - Also copy the `Disegni' directory to the `Algotex' directory on the C:\ drive. 15) Configure the plotter's environment settings. 2 click the `Algotex Plotter' icon on the desktop to open the plotting program. Click the `Environment Settings' button in the `Algotex Plotter Driver' menu. - Click the browse button to the right of the `QUEUE FILE' field. - Navigate to the `Coda.cod' file. Select the file and click the `Open' button. - Click the browse button to the right of the `LOG FILE' field. - Navigate to the `Log.Log' file. Select the file and click the `Open' button. - Click the browse button to the right of the `PLOTTER CONFIGURATION FILE' field. - Navigate to the `'Power-L700.cfg' file. Select the file and click the `Open' button. - Click the browse button to the right of the `RASTER FILES' field. - Navigate to the `Raster' directory in the `Disegni' directory. Select the directory and click the `Open' button. - Click the browse button to the right of the `VECTOR FILES' field. - Navigate to the `HPGL' directory in the `Disegni' directory. Select the directory and click the `Open' button.

Information

Microsoft Word - Upgrade-W98-XP.doc

2 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

306002


You might also be interested in

BETA
Microsoft Word - Upgrade-W98-XP.doc