Read ColorSide Brochure text version

ABSD 083 C1 ColorSide Lit Pc.

10/29/01

7:56 AM

Page 1 (1,1)

The Beauty of ColorSide is More Than Just Skin Deep ... it's built in with the Pro-1TM Process

ColorSideTM Pre-Finished Sid 15/30-Year Limited Warranty

FIFTEEN-YEAR LIMITED WARRANTY ­ FINISH

LP warrants the finish on its 1/2" ColorSideTM Siding against peeling, b cracking, or erosion of the factory finish except for reasonable fade fr weathering (10 N.B.S. units in 8 years) which would render ABTcoTM C unsuitable, for a period of fifteen years from the date of installation un conditions of use and exposure.

THIRTY-YEAR LIMITED WARRANTY ­ SUBSTRATE

LP warrants its ColorSide Siding against defects in material delamina checking, splitting, cracking and chipping of the base substrate due manufacturing processes for a period of thirty years from the date of under normal conditions of use and exposure, providing the siding is stored, installed, maintained and protected against all sources of moi accumulation within the wall cavity as specified in ABTco's Applicatio

NOTICE: THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSE INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR MERCHANT FITNESS FOR A PARTICULAR PURPOSE.

For a complete warranty contact: LP Specialty Products Roaring River, North Carolina 28669 1-800-334-3551

ABSD 083 C1 ColorSide Lit Pc.

10/29/01

7:56 AM

Page 1 (2,1)

e-Finished Siding mited Warranty

ANTY ­ FINISH

olorSideTM Siding against peeling, blistering, finish except for reasonable fade from normal ars) which would render ABTcoTM ColorSide Siding ears from the date of installation under normal

ColorSide

TM

Life's Worth It.

NTY ­ SUBSTRATE

gainst defects in material delamination, hipping of the base substrate due to faulty iod of thirty years from the date of installation d exposure, providing the siding is properly otected against all sources of moisture as specified in ABTco's Application Instructions.

F ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, IMPLIED WARRANTIES OR MERCHANTABILITY AND

NEW FROM THE SIDING INDUSTRY LEADER ... C O L O R S I D E TM P R

a 28669

ABSD 083 C1 ColorSide Lit Pc.

10/29/01

7:56 AM

Page 1 (3,1)

Side

TM

Worth It.

N D U S T RY LEADER ... C O L O R S I D E TM PRE-FINISHED SIDING.

ABSD 083 C1 ColorSide Lit Pc.

10/29/01

7:56 AM

Page 1 (1,2)

under normal conditions of use and exposure, providing the siding is stored, installed, maintained and protected against all sources of moi accumulation within the wall cavity as specified in ABTco's Applicatio

NOTICE: THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSE INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR MERCHANT FITNESS FOR A PARTICULAR PURPOSE.

For a complete warranty contact: LP Specialty Products Roaring River, North Carolina 28669 1-800-334-3551

P R O - 1 TM THE ROARING RIVER PROCESS

There is no siding manufacturing process exactly like it in the world. The hardboard siding products produced in Roaring River are unmatched for quality and value. Four critical steps in the Pro-1 Process are the key to producing better, more attractive, stronger hardboard siding. These steps are the heart of the Pro-1 TM Process.

continued on back ...

LP and ABTco are registered trademarks of Louisiana-Pacific Corporation. LP, ColorSide, Fusion Finish and Pro-1 are trademarks © 2001 Louisiana-Pacific Corporation.All Rights Reserved.Printed in USA.

SALES & MARKETING PHONE: 800.566.2282 FAX 704.875.1680

CUSTOMER SE 877.777.6158 F

d exposure, providing the siding is properly ABSD 083 C1 ColorSide of Pc. 10/29/01 7:56 AM otected against all sourcesLit moisture as specified in ABTco's Application Instructions.

F ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, IMPLIED WARRANTIES OR MERCHANTABILITY AND

Page 1 (2,2)

NEW FROM THE SIDING INDUSTRY LEADER ... C O L O R S I D E TM P R

a 28669

E:

CUSTOMER SERVICE PHONE: 877.777.6158 FAX 336.696.3404

orporation. LP, ColorSide, Fusion Finish and Pro-1 are trademarks of Louisiana-Pacific Corporation. HB9042SH acific Corporation.All Rights Reserved.Printed in USA.

6/01

ABSD 083 C1 ColorSide Lit Pc.

10/29/01

7:56 AM

Page 1 (3,2)

N D U S T RY LEADER ... C O L O R S I D E TM PRE-FINISHED SIDING.

ABSD 083 C1 ColorSide Lit Pc.

10/29/01

7:56 AM

Page 2 (1,1)

You Deserve The Premium Pre-Finished Siding

TM TM

ABTco ColorSide Pre-Finished Hardb

How confident are we with its staying power to hold its original, rich color? So confident, we've backed it with a 30-year substrate/15-year finish non-prorated warranty. Available in nine of the most traditionally desirable and architecturally pleasing colors, it is proven to withstand the test of time. ABTcoTM ColorSideTM Pre-Finished Siding delivers countless superior advantages that put beauty and labor costs in your favor. It's another example of how our continual commitment to meet your needs has made ABTco the siding industry leader for over 30 years.

COLOR VERSATILITY, DURABILITY AND PERFORMANCE

ColorSide is available in nine of the most distinctive and architecturally pleasing colors that allow for design flexibility. ColorSide's exclusive factory finish process applies multiple layers along the edges and surface providing a consistent plank-to-plank color match, low maintenance and long-term exterior durability.

EAS INT

Colo align insta cours get a entr splin

MA

Colo exclu high-

NO

Colo fasten

COMPLETE SIDING AND ACCESSORY SYSTEM

ColorSide is the only complete system of pre-finished siding with color-matched accessories offered by one exterior siding manufacturer. The ColorSide system gives the design flexibility to mix and match siding and accessory colors.

30/1

Colo 15-ye

NATURAL CEDAR GRAIN TEXTURE APPEARANCE

ColorSide's cedar grain texture complements all architectural styles. The natural cedar grain texture is embossed into the siding. The exposed surface is never machined or carved maintaining the integrity of the substrate.

FR

ABT for m sidin to me

HALF-INCH THICKNESS IN FULL 16' LENGTHS

ColorSide's 1/2" thick substrate means a stronger and more rigid siding product that lays flatter on the wall. ColorSide comes in full 16' lengths providing 33% more* material per piece that allows for quicker installation than other

ABSD 083 C1 ColorSide Lit Pc.

10/29/01

7:56 AM

Page 2 (2,1)

Siding

inished Hardboard Siding

rated lly

EASY TO INSTALL WITH THE INTERLOCKING SYSTEM

ColorSide is engineered, interlocking, selfaligning system conceals nails, speeds installation and assures level, course-tocourse alignment. With no visible nails, you get a clean, blemish-free look with fewer entry points for water. There is no plastic spline that can break during installation.

ACCESSORIES

2.

7.

8.

ent to

6. 5.

1. 2. 3. 4. 5. Outside Corner Base Outside Corner Cap Inside Corner J-Trim Starter Strip 6. 7. 8. 9.

3. 4.

1.

MANUFACTURED WITH THE PRO-1 PROCESS

ColorSide is manufactured to the highest standards using our exclusive Pro 1TM Process. The Pro-1 Process produces excellent, high-quality, uniform and dimensionally stable siding material.

bility. istent

NO SPECIAL CUTTING TOOLS REQUIRED

ColorSide can be installed using standard cutting and fastening tools.

Caulk Touch-Up Paint Joint Moulding Matching Color Nails (Not Shown)

30/15 WARRANTY

ColorSide is backed by a 30-year limited substrate warranty with a 15-year finish warranty (non-prorated). into

PACKAGING

Product 9.5"x 192"(241mm x 4877mm) Pcs/Bundles 6 Sq.Ft.(m2 )/ Bundle 76 (7.1m 2) Pcs/Unit 150 Sq.Ft.(m 2)/ Unit 1900 (176.7m2)

FROM THE SIDING INDUSTRY LEADER

ABTco Hardboard Siding has been protecting and beautifying homes for more than 30 years. Not many others can say that. ColorSide siding is another example of our continual commitment to meet our customer's need.

han other

ABSD 083 C1 ColorSide Lit Pc.

10/29/01

7:57 AM

Page 2 (3,1)

2.

7.

FUSION FINISH TM O V E R L AY:

8.

Fused to our siding's surface before priming is a natural fiber filament layer impregnated with resins and linseed oil. This provides added protection against the elements and results in a less porous, easier to paint surface.

3. 5.

Base Cap 6. 7. 8. 9.

1.

4.

Caulk Touch-Up Paint Joint Moulding Matching Color Nails (Not Shown)

EMBOSSED PROFILE:

Our molding process uses matched top and bottom plates to high-pressure emboss the siding profile. Embossing provides a beautiful texture and maintains a consistent product density. Exposed surfaces are never carved or machined.

s/Bundles 6

Sq.Ft.(m2 )/ Bundle 76 (7.1m 2)

Pcs/Unit 150

Sq.Ft.(m 2)/ Unit 1900 (176.7m2)

OVEN-BAKING:

This additional curing step removes all natural and process moisture from the siding. Complete dryness adds to the siding's physical properties and improves overall strength.

FPO

ABSD 083 C1 ColorSide Lit Pc. 10/29/01 7:57 AM COMPLETE SIDING AND

Page 2 (1,2) ACCESSORY SYSTEM

ColorSide is the only complete system of pre-finished siding with color-matched accessories offered by one exterior siding manufacturer. The ColorSide system gives the design flexibility to mix and match siding and accessory colors.

Colo fasten

30/1

Colo 15-ye

NATURAL CEDAR GRAIN TEXTURE APPEARANCE

ColorSide's cedar grain texture complements all architectural styles. The natural cedar grain texture is embossed into the siding. The exposed surface is never machined or carved maintaining the integrity of the substrate.

FR

ABT for m sidin to me

HALF-INCH THICKNESS IN FULL 16' LENGTHS

ColorSide's 1/2" thick substrate means a stronger and more rigid siding product that lays flatter on the wall. ColorSide comes in full 16' lengths providing 33% more* material per piece that allows for quicker installation than other pre-finished siding products. Each ColorSide plank is equivalent to 10 sq. ft. making project estimating and material ordering easy.

* vs. 12' material

FLAGSTONE GRAY 15640

VICKSBURG GREEN 15635

FROST WHITE 15610

PRAIRIE BEIGE 15620

NANTUCKET GRAY 15625

DRIFTWOOD GRAY 15605

NAVA 15

ABSD 083 C1 ColorSide Lit ColorSide can be installed using standard cutting Pc. 10/29/01 7:57 AM Page 2 (2,2)

and

5. Starter Strip

(Not Shown)

fastening tools.

30/15 WARRANTY

ColorSide is backed by a 30-year limited substrate warranty with a 15-year finish warranty (non-prorated). into

PACKAGING

Product 9.5"x 192"(241mm x 4877mm) Pcs/Bundles 6 Sq.Ft.(m2 )/ Bundle 76 (7.1m 2) Pcs/Unit 150 Sq.Ft.(m 2)/ Unit 1900 (176.7m2)

FROM THE SIDING INDUSTRY LEADER

ABTco Hardboard Siding has been protecting and beautifying homes for more than 30 years. Not many others can say that. ColorSide siding is another example of our continual commitment to meet our customer's need.

ColorSide Lap

han other rial

COVERAGE

Siding Width 9 . 5 " (241mm) Overlap 1.945" (49.4mm) Exposure 7.5" ( 1 9 0 . 5 m m ) Sq.Ft.(m 2)/Unit 1000 Sq.Ft.(92.9 m2 ) of wall area (includes 5% cutting/fitting waste) 1330 (123.7m 2)

Each plank is equal to 10 sq. f t . C a l c u l a t i o n : Exposure 7 . 5 " = .625" x 16' = 10' 12

AY

DRIFTWOOD GRAY 15605

NAVAJO TAN 15630

BAYTOWN BLUE 15615

ADOBE WHITE 15600

ARCHITECTURAL SPECIFICATIONS:

Siding shall be thermoset acrylic latex primed and thermoset pre-finished ColorSide 1/2" Pre-Finished Lap Siding, (refer to profile and size information) with Fusion Finishoverlay as manufactured using the Pro-1 Process by ABTco.

*Printed color may not be true to actual product

ABSD 083 C1 ColorSide Lit Pc.

(Not Shown)

10/29/01

7:57 AM

Page 2 (3,2)

s/Bundles 6

Sq.Ft.(m 2)/ Bundle 76 (7.1m 2)

Pcs/Unit 150

Sq.Ft.(m 2)/ Unit 1900 (176.7m2)

OVEN-BAKING:

This additional curing step removes all natural and process moisture from the siding. Complete dryness adds to the siding's physical properties and improves overall strength.

FPO

Exposure 4mm) 7.5" ( 1 9 0 . 5 m m )

Sq.Ft.(m 2)/Unit 1000 Sq.Ft.(92.9 m2 ) of wall area (includes 5% cutting/fitting waste) 1330 (123.7m 2)

H U M I D I F I C AT I O N :

The dry siding is then brought back to a specific moisture content using scientifically controlled systems. The result? More consistency and dimensional stability in our siding. Complementing these steps are other Pro-1 Process advantages: a chip thickness grading system, for better raw material control; thermoset primer on exposed surfaces with multiple finishing layers along the edges for tighter, less porous painting surface; and, extra attention to packaging so your Pro-1 siding arrives ready to install. No other hardboard siding manufacturing process is as comprehensive and controlled as the Pro-1 Process. No other hardboard product gives you the value and quality ABTco ColorSide siding provides.

x 16' = 10'

RAL SPECIFICATIONS:

lic latex primed and thermoset pre-finished Lap Siding, (refer to profile and size information) manufactured using the Pro-1 Process by ABTco.

Information

ColorSide Brochure

12 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

899986


You might also be interested in

BETA
ColorSide Brochure