Read Microsoft Word - EM3610 Drawings-rev2 .doc text version

EMK3610 Layout Drawings

©Amada America Inc.

EMK3610NT with AMNC-F Control Layout Drawings

Amada America Inc. 7025 Firestone Blvd. Buena Park CA. 90621 Phone: (714) 739 2111 Fax.: (714) 739 4099 Email [email protected]

Print Date 02/09/2007 Revision 2

This document available on the World Wide Web at http://www.amada.com/

Page 1 of 8

EMK3610 Layout Drawings

©Amada America Inc.

Warning

Qualified personnel must complete all work. Do not apply power to the EMK 3610 NT until an Amada Service Engineer is present and has instructed you to do so. Not all information required to install the EMK 3610 NT is included with this document. Specific details for proper installation are found in the document EMK 3610 NT with AMNC-F User Pre-installation Guide available at the Amada America Internet web site at http://www.amada.com/. Considerable effort has been made to ensure that this manual is free of inaccuracies and omissions. However, as we are constantly improving our product, some of the data contained herein may be out of date. Please check our Internet site, http://www.amada.com/, for the latest release of this document.

Print Date 02/09/2007 Revision 2

This document available on the World Wide Web at http://www.amada.com/

Page 2 of 8

EMK3610 Layout Drawings

©Amada America Inc.

Contents

Planning the Location of the EMK 3610 NT ........................................................................................................ 4

Plan View - EMK 3610 NT ...........................................................................................................................................................5 Detailed Plan View - EMK 3610 NT .............................................................................................................................................6 Elevation View - EMK 3610 NT....................................................................................................................................................7 End View - EMK 3610 NT............................................................................................................................................................8

Print Date 02/09/2007 Revision 2

This document available on the World Wide Web at http://www.amada.com/

Page 3 of 8

EMK3610 Layout Drawings

©Amada America Inc.

Planning the Location of the EMK 3610 NT

The following diagrams provide the details for positioning the EMK 3610 NT. No obstacles are allowed in the worksheet travel area and the ceiling must be at least 40" above the EMK 3610 NT. All of the recommended maintenance areas should be used, but at a minimum the doors of the NC unit must be able to be opened. Any reduction of the listed maintenance areas may increase time and expense of installation and maintenance. The EMK 3610 NT machine and control must be protected from direct sunlight or other heat sources. Direct exposure to direct heating sources such as infrared heaters have been shown to affect punch and die alignment.

Print Date 02/09/2007 Revision 2

This document available on the World Wide Web at http://www.amada.com/

Page 4 of 8

EMK3610 Layout Drawings

©Amada America Inc.

Plan View - EMK 3610 NT

Electrical Requirements: EM 3610 NT 200 VAC/ 3 Phase / 60Hz. ±10%, 27 kVA 78 amps @ 200VAC / 3phase / 60 hz. To operate at 230 / 460 VAC a transformer is required.

12"

12" Scale

12"

E1

Compressed Air Requirements: A1 EM 3610 NT 80 psi @ 19 ft3/min.

340" Recommended Safety / Maintenance area 40" from all components

Y-axis Optional Material Support Required

261.2" Machine length

120"

Track 2 Punch C

Optional Material Support Required

Operator Control Station

E1

Machine Centerline

98.425" to X axis origin 101" to edge of table 202" Machine Width

393.70" Maximum Travel Area when punching 196.85" Material*

474" Recomended Safety / Maintenance Area 40" from all components*

* Actual clearance depends on the maximum size of the material that will be punched - Always use sub tables to support sheets larger than 100"

Print Date 02/09/2007 Revision 2

This document available on the World Wide Web at http://www.amada.com/

Page 5 of 8

EMK3610 Layout Drawings

©Amada America Inc.

Detailed Plan View - EMK 3610 NT

100.79" 47.80"

47.27" 128.39" For Transportation o 19.85" 25.15" 19.72" 100.79"

201.57"

201.57"

2.36"

Print Date 02/09/2007 Revision 2

This document available on the World Wide Web at http://www.amada.com/

Page 6 of 8

EMK3610 Layout Drawings

©Amada America Inc.

Elevation View - EMK 3610 NT

26.77"

62.60" Throat Depth

60.04"

60.82"

3.21"

51.85"

91.21" 60.98" 39.37" 9.21" 45.28" 15.75" 38.98" 129.33" 210.24" 258.01" (239.0" For Transportation) 8.40" 11.02" 15.75" 41.96"

Print Date 02/09/2007 Revision 2

This document available on the World Wide Web at http://www.amada.com/

Page 7 of 8

EMK3610 Layout Drawings

©Amada America Inc.

End View - EMK 3610 NT

127.65"

1.26" *

43.26"

33.30"

41.34"

33.30"

43.26"

* Varies with shimming and/or mounting techniques

Print Date 02/09/2007 Revision 2

This document available on the World Wide Web at http://www.amada.com/

Page 8 of 8

Information

Microsoft Word - EM3610 Drawings-rev2 .doc

8 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

188623


You might also be interested in

BETA
Microsoft Word - EM3610 Drawings-rev2 .doc