Read AnthonyGlueLam.pdf text version

TM

Beam, Header and Column Tables

Anthony 24F Glulam Advantages

x Economical Beam & Header x Architectural, Industrial & Framing Grades x No nail laminating necessary x Flexibility in design & installation x Cambered or non-cambered

The Anthony 24F Glulam is a glued laminated beam and header used where reliable engineered wood applications are required. It is an economical alternative to LVL and PSL in many standard structural applications where the high strength and

x Design stresses 2400Fb - 1.8E - 270Fv x 3 1/8", 3 1/2", 5 1/8", 5 1/2", 6 3/4", and 8 3/4" width x Lighter than steel, LVL, and PSL x Renewable resource x Individually wrapped

stiffness values are not really needed. Anthony's 24F Glulam is readily available through stocking dealers. The 3-1/2" and 5-1/2" widths are available which readily match 2x4 and 2x6 wall framing. The Anthony 24F Glulam uses only readilyavailable Southern pine lumber, recognized through extensive testing as the strongest lumber resource available. To enhance Anthony 24F Glulam quality further, all outer laminations have strict quality control procedures. Each beam has a specific lumber lay-up combination which optimizes Glulam performance. The highest strength lumber is placed in the tension and compression zones, efficiently and optimally using lumber resources. The Anthony 24F Glulam can be used for window, door and garage door headers, floor edge and center girder beams, roof ridge beams, and commercial beams and purlins.

Features

Dimensional Stability: Glulam is a laminated composite product of high-strength lumber. This randomizes any natural defects so there is greater beam strength and a higher degree of reliability. There is also less likelihood of warping, twisting, checking, cupping or shrinking. Moisture Control: Anthony Glulam consistently averages 12% moisture, which is near equilibrium moisture content. Building Code Evaluations: Adopted under all major material building codes. Fire Performance: Glulam falls into the building code category of heavy timber, and therefore has excellent fire performance. Quality Assurance: Glulam is manufactured in accordance with ANSI/AITC A190.1-1992 (Structural Glued Laminated Timber). Plant implemented Total Quality Management, statistical process control procedures and AITC as our quality assurance program ensure consistent quality and performance in every Glulam.

1

Revised 8/00

About Anthony Forest Products Company

Anthony Forest Products is a completely integrated forest products company incorporated in 1965, and begun in 1916. The company owns approximately 73,000 acres of timberland in Arkansas, Louisiana, and Texas, and operates southern pine lumber producing mills in Urbana, Arkansas, and Atlanta, Texas; and wood chip mills in Plain Dealing, Louisiana, and Troup, Texas. The company also operates an engineered wood laminating plant in El Dorado, Arkansas and Washington, Georgia. Our History: Headquartered in El Dorado, Arkansas, Anthony Forest has made some dramatic changes to position itself for the 21st Century. This vision could not have been accomplished without the four generations of forest products experience passed down through the family. The company has applied its policy of environmental protection to its timberlands through adherence to Sustainable Forestry Initiative through the American Forest and Paper Association. Our land managers have received extensive training in the protection of threatened and endangered species, which may be encountered on the lands. We are committed to being a prudent steward of our lands through the next century. Our two laminating plants make us the largest southern pine glued-laminated timber manufacturer in the USA. We have 35 years of solid experience in engineered wood products, which include the Power Beam®, Power Header®, Power Log®, Power ColumnTM, Power Plank, 1.6 E Short Span Header and custom laminated products.

Table of Contents

Glulam Advantages . . . . . . . . . . .Pg 1 Anthony Forest History . . . . . . . .Pg 2 Performance Comparison Tables . .Pg 3 Design Properties . . . . . . . . . . . . .Pg 4 Window, Door and Garage Door . .Pg 5 Headers ­ Single Story Window, Door and Garage Door . .Pg 6 Headers ­ Single Story (cont.) Allowable Floor Load Tables . . . .Pg 7 LDF=1.00 3 1/8" and 5 1/8" Allowable Roof Load Tables . . . .Pg 8 LDF=1.15 3 1/8" and 5 1/8" Allowable Roof Load Tables . . . .Pg 9 LDF=1.25 3 1/8" and 5 1/8" Allowable Roof Load Tables . . . .Pg 10 LDF=1.00 3 1/2" and 5 1/2" Allowable Roof Load Tables . . . .Pg 11 LDF=1.15 3 1/2" and 5 1/2" Allowable Roof Load Tables . . . .Pg 12 LDF=1.25 3 1/2" and 5 1/2" Allowable Floor Load Tables . . . .Pg 13 LDF=1.00 6 3/4" Allowable Roof Load Tables . . . .Pg 14 LDF=1.15 6 3/4" Allowable Roof Load Tables . . . .Pg 15 LDF=1.25 6 3/4" Allowable Floor Load Tables . . . .Pg 16 LDF=1.00 8 3/4" Allowable Roof Load Tables . . . .Pg 17 LDF=1.15 8 3/4" Allowable Roof Load Tables . . . .Pg 18 LDF=1.25 8 3/4" Load Table Notations . . . . . . . . . .Pg 19 and Examples Load Table Examples . . . . . . . . . .Pg 20 Connection Details . . . . . . . . . . . .Pg 21 Guidelines for Drilling . . . . . . . . .Pg 22 Horizontal Holes Vertical 1/2" Diameter Holes . . . .Pg 23 Glulam Beams Notching Equations for . . . . . . . . .Pg 24 Anthony Glulam Standard Radius or Curvature . . . .Pg 25 (feet) Anthony Power ColumnTM . . . . . .Pg 26 Anthony Power ColumnTM . . . . . .Pg 27 Combinations #50 Engineered Timbers . . . . . . . . . . .Pg 28 Power Products Storage . . . . . . . .Pg 29 Protection & Handling Instructions Power Products Certificate . . . . . .Pg 30 of Warranty

2

Anthony 24F Glulam

Performance Comparison Tables

Clear Span 8' 16' 24' 8' 16' 18' Clear Span 8' 16' 24' 8' 16' 18' Allowable PLF Load (LL/TL) 600/900 450/650 110/170 2400/2400 550/760 480/640 Allowable PLF Load (LL/TL) 600/900 450/650 110/170 2400/2400 550/760 480/640 Beam Application Floor Floor Floor Roof (1.15) Roof (1.15) Roof (1.15) Beam Application Floor Floor Floor Roof (1.15) Roof (1.15) Roof (1.15) Anthony 24F Glulam 3-1/8 x 9-5/8 5-1/8 x 12-3/8 3-1/8 x 13-3/4 3-1/8 x 13-3/4 5-1/8 x 12-3/8 5-1/8 x 12-3/8 Anthony 30F Glulam (30Fb-2.1E-290Fv) 3-1/2 x 7-1/4 5-1/2 x 11-1/4 3-1/2 x 14 3-1/2 x 11-1/4 5-1/2 x 11-1/4 5-1/2 x 11-1/4

3-1/8" & 5-1/8" Widths - Standard Depths

Glulam Conversions

Multiple Lumber #1 SYP1 3 ply - 2 x 12 6 ply - 2 x 12 4 ply - 2 x 12 5 ply - 2 x 12 6 ply - 2 x 12 7 ply - 2 x 12 LVL4 2 ply - 1-3/4 x 7-1/4 3 ply - 1-3/4 x 11-7/8 2 ply - 1-3/4 x 14 2 ply - 1-3/4 x 11-7/8 3 ply - 1-3/4 x 11-1/4 3 ply - 1-3/4 x 11-7/8 Multiple Lumber #1 DF-L2 3 ply - 2 x 12 8 ply - 2 x 12 5 ply - 2 x 12 6 ply - 2 x 12 8 ply - 2 x 12 8 ply - 2 x 12 PSL5 3-1/2 x 7-1/4 5-1/4 x 11-7/8 3-1/2 x 14 3-1/2 x 11-7/8 5-1/4 x 11-1/4 5-1/4 x 11-7/8 Timbers #1 DF-L3 6 x 12, 8 x 10 8 x 14, 12 x 12 6 x 14, 8 x 12 10 x 14, 12 x 12 8 x 14, 12 x 12 8 x 14, 12 x 12 Steel 6 36 ksi W6 x 9, W8 x 10 W10 x 12, W8 x 15 W10 x 12, W12 x 14 W10 x 12, W8 x 13 W10 x 15, W12 x 14 W10 x 15, W12 x 14

Anthony 24F Glulam

Performance Comparison Tables

Clear Span 8' 16' 24' 8' 16' 18' Clear Span 8' 16' 24' 8' 16' 18' Allowable PLF Load (LL/TL) 600/900 450/650 110/170 2400/2400 550/760 480/640 Allowable PLF Load (LL/TL) 600/900 450/650 110/170 2400/2400 550/760 480/640 Beam Application Floor Floor Floor Roof (1.15) Roof (1.15) Roof (1.15) Beam Application Floor Floor Floor Roof (1.15) Roof (1.15) Roof (1.15) Anthony 24F Glulam 3-1/2 x 8-1/4 5-1/2 x 12-3/8 3-1/2 x 13-3/4 3-1/2 x 13-3/4 5-1/2 x 11 5-1/2 x 12-3/8 Anthony 30F Glulam (30Fb-2.1E-290Fv) 3-1/2 x 7-1/4 5-1/2 x 11-1/4 3-1/2 x 14 3-1/2 x 11-1/4 5-1/2 x 11-1/4 5-1/2 x 11-1/4

3-1/2" & 5-1/2" Widths - Standard Depths

Glulam Conversions

Multiple Lumber #1 SYP1 3 ply - 2 x 12 6 ply - 2 x 12 4 ply - 2 x 12 5 ply - 2 x 12 6 ply - 2 x 12 7 ply - 2 x 12 LVL4 2 ply - 1-3/4 x 7-1/4 3 ply - 1-3/4 x 11-7/8 2 ply - 1-3/4 x 14 2 ply - 1-3/4 x 11-7/8 3 ply - 1-3/4 x 11-1/4 3 ply - 1-3/4 x 11-7/8 Multiple Lumber #1 DF-L2 3 ply - 2 x 12 8 ply - 2 x 12 5 ply - 2 x 12 6 ply - 2 x 12 8 ply - 2 x 12 8 ply - 2 x 12 PSL5 3-1/2 x 7-1/4 5-1/4 x 11-7/8 3-1/2 x 14 3-1/2 x 11-7/8 5-1/4 x 11-1/4 5-1/4 x 11-7/8 Timbers #1 DF-L3 6 x 12, 8 x 10 8 x 14, 12 x 12 6 x 14, 8 x 12 10 x 14, 12 x 12 8 x 14, 12 x 12 8 x 14, 12 x 12 Steel 6 36 ksi W6 x 9, W8 x 10 W10 x 12, W8 x 15 W10 x 12, W12 x 14 W10 x 12, W8 x 13 W10 x 15, W12 x 14 W10 x 15, W12 x 14

Design values used for conversion tables follow:

1 2 3 4 5

Southern Pine #1 from National Design Specifications Supplement Table 4B Douglas Fir Larch #1 from National Design Specifications Supplement Table 4A Douglas Fir Larch #1 from National Design Specifications Supplement Table 4D LVL Design Values: Fb=2925 psi, Fv=285 psi, MOE=2,000,000 psi

Parallam® Design Values: Fb=2900 psi, Fv=290 psi, MOE=2,000,000 psi Parallam® is a registered trademark of Trus Joist MacMillian, a Weyerhauser business 6 Steel Design Values are based on 36 ksi steel using the Seventh Edition of the Steel Construction Manual

3

Anthony 24F Glulam

Design Properties

24F Glulam Design Properties Allowable Design Stresses (psi) Flexural Stress FlexuralStress Compression Tension Fb* Fb 2400 1950 Tension Compression Compression Parallel to Perpendicular Parallel to Horizontal Modulus of Grain to Grain Grain Shear Elasticity Ft Fc Fc Fv MOE 1150 740 1700 270 1,800,000

SINGLE SPAN BEAM: Concentrated load at mid span Uniformly distributed loads Two equal concentrated loads at 1/3 points of span CONTINUOUS BEAM OR CANTILEVER: All loading conditions

T

*For nominal 12" depths. For other depths: Cv = KL[(21/L) x (12/d) x (5.125/b) ] 1.0 L= length of member between points of zero moment, ft. d = depth, of bending member, inches. b = width, inches for full width members. KL = loading coefficient.

KL 1.09 1.0 0.96 1.0

24F Glulam Section Properties

3-1/8" Glulam

Design Property

(in.2)

5-1/8" Glulam

Design Property

Area (in.2) Section Modulus (in.3) Moment of Inertia (in.4) Weight (lbs/LF) 11 56 103 568 14.9 123/8 63 131 809 16.7

STANDARD DEPTHS (in inches)

11 123/8 133/4 34 39 43 63 80 98 347 494 677 9.1 10.2 11.3 151/8 47 119 901 12.5 161/2 177/8 52 56 142 166 1170 1487 13.6 14.8

STANDARD DEPTHS (in inches)

133/4 70 161 1110 18.6 151/8 78 195 1478 20.5 161/2 177/8 191/4 85 92 99 233 273 317 1919 2439 3047 22.3 24.2 26.1 205/8 22 233/8 106 113 120 363 413 467 3747 4548 5455 27.9 29.8 31.6

81/4 95/8 Area 26 30 Section Modulus(in.3) 35 48 Moment of Inertia(in.4) 146 232 Weight (lbs/LF) 6.8 7.9

3-1/2" Glulam

Design Property

81/4 2) Area (in. 29 Section Modulus(in.3) 40 Moment of Inertia(in.4) 164 Weight (lbs/LF) 7.6

5-1/2" Glulam

Design Property STANDARD DEPTHS (in inches)

233/8 129 501 5854 34 161/2 177/8 58 63 159 186 1310 1666 15.3 16.5 11 123/8 133/4 151/8 161/2 177/8 191/4 205/8 22 2) Area (in. 61 68 76 83 91 98 106 113 121 Section Modulus(in.3) 111 140 173 210 250 293 340 390 444 Moment of Inertia(in.4) 610 869 1191 1586 2059 2618 3269 4021 4880 Weight (lbs/LF) 16 18 20 22 24 26 28 30 32

STANDARD DEPTHS (in inches)

95/8 34 54 260 8.9 11 39 71 388 10.2 123/8 43 89 553 11.4 133/4 151/8 48 53 110 133 758 1009 12.7 14

6-3/4" Glulam

Design Property

81/4 95/8 Area (in.2) 56 65 Section Modulus(in.3) 77 104 Moment of Inertia(in.4) 316 502 Weight (lbs/LF) 14.7 17.1 11 74 136 749 19.6 123/8 84 172 1066 22.0 133/4 93 213 1462 24.5

STANDARD DEPTHS (in inches)

151/8 102 257 1946 26.9 161/2 111 306 2527 29.4 177/8 121 359 3213 31.8 191/4 205/8 22 233/8 243/4 261/8 273/4 287/8 130 139 149 158 167 176 187 195 417 479 545 615 689 768 866 938 4012 4935 5990 7184 8528 10030 12020 13542 34.3 36.7 39.2 41.6 44.1 46.5 49.4 51.4

8-3/4" Glulam

Design Property

81/4 Area 72 Section Modulus (in.3) 99 Moment of Inertia (in.4) 409 Weight (lbs/LF) 19.0

(in.2)

STANDARD DEPTHS (in inches)

95/8 84 135 650 22.2 11 96 176 971 25.4 123/8 108 223 1382 28.6 133/4 120 276 1896 31.7 151/8 132 334 2523 34.9 161/2 144 397 3276 38.1 177/8 191/4 205/8 22 156 168 180 193 466 540 620 706 4165 5201 6397 7764 41.3 44.4 47.6 50.8 233/8 243/4 261/8 273/4 287/8 205 217 229 243 253 797 893 995 1123 1216 9313 11055 13002 15582 17555 54.0 57.1 60.3 64.1 66.7

4

Anthony 24F Glulam

Window, Door and Garage Door Headers

Key - Each cell contains two nominal header sizes:

Row 1: Header size for bearing length = 3.0" Row 2: Header size for bearing length = 1-1/2"

Steps in Using This Table:

1. 2. 3. 4.

Find the row with the appropriate roof loading conditions (Live Load, Dead Load & LDF). Find the clear opening that meets or exceeds the window, door, or garage door size. Find the span of the trusses or rafters that frame into the header. Select the proper header size.

Glulam Selection Table for Window, Door and Garage Door Headers

Roof Loading Clear Opening 4' 6' 8' Live 25 PSF Dead 15 PSF LDF 1.15 9' 10' 12' 16' 18' 4' 6' 8' Live 30 PSF Dead 15 PSF LDF 1.15 9' 10' 12' 16' 18' 4' 6' 8' Live 40 PSF Dead 15 PSF LDF 1.15 9' 10' 12' 16' 18' 16' 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 5-1/8 x 8-1/4 3-1/8 x 9-5/8 5-1/8 x 8-1/4 3-1/8 x 11 5-1/8 x 8-1/4 3-1/8 x 11 5-1/8 x 9-5/8 3-1/8 x 12-3/8 5-1/8 x 9-5/8 3-1/8 x 12-3/8 5-1/8 x 11 3-1/8 x 13-3/4 6-3/4 x 11 3-1/8 x 15-1/8 6-3/4 x 11 3-1/8 x 15-1/8 6-3/4 x 12-3/8 5-1/8 x 13-3/4 5-1/8 x 13-3/4 3-1/8 x 8-1/4 5-1/8 x 13-3/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 9-5/8 3-1/8 x 9-5/8 3-1/8 x 12-3/8 5-1/8 x 11 3-1/8 x 15-1/8 5-1/8 x 12-3/8 20' 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 9-5/8 3-1/8 x 8-1/4 5-1/8 x 8-1/4 3-1/8 x 9-5/8 5-1/8 x 8-1/4 3-1/8 x 11 5-1/8 x 8-1/4 3-1/8 x 11 5-1/8 x 9-5/8 3-1/8 x 12-3/8 6-3/4 x 9-5/8 3-1/8 x 13-3/4 6-3/4 x 9-5/8 3-1/8 x 13-3/4 6-3/4 x 11 5-1/8 x 12-3/8 6-3/4 x 11 5-1/8 x 12-3/8 3-1/8 x 12-3/8 5-1/8 x 13-3/4 3-1/8 x 13-3/4 5-1/8 x 15-1/8 5-1/8 x 15-1/8 3-1/8 x 8-1/4 5-1/8 x 15-1/8 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 9-5/8 3-1/8 x 9-5/8 3-1/8 x 11 5-1/8 x 8-1/4 3-1/8 x 13-3/4 5-1/8 x 11 3-1/8 x 16-1/2 6-3/4 x 11 Span of Supported Roof Framing 24' 28' 32' 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 9-5/8 3-1/8 x 9-5/8 3-1/8 x 8-1/4 3-1/8 x 9-5/8 5-1/8 x 8-1/4 3-1/8 x 9-5/8 3-1/8 x 11 3-1/8 x 11 3-1/8 x 8-1/4 3-1/8 x 9-5/8 3-1/8 x 9-5/8 5-1/8 x 8-1/4 5-1/8 x 8-1/4 5-1/8 x 8-1/4 3-1/8 x 9-5/8 3-1/8 x 9-5/8 3-1/8 x 11 5-1/8 x 8-1/4 5-1/8 x 8-1/4 5-1/8 x 8-1/4 3-1/8 x 11 3-1/8 x 11 3-1/8 x 11 5-1/8 x 8-1/4 3-1/8 x 12-3/8 6-3/4 x 8-1/4 3-1/8 x 12-3/8 6-3/4 x 9-5/8 3-1/8 x 13-3/4 6-3/4 x 9-5/8 5-1/8 x 12-3/8 6-3/4 x 11 5-1/8 x 12-3/8 3-1/8 x 11 5-1/8 x 13-3/4 3-1/8 x 13-3/4 5-1/8 x 13-3/4 3-1/8 x 15-1/8 5-1/8 x 15-1/8 5-1/8 x 15-1/8 3-1/8 x 8-1/4 5-1/8 x 16-1/2 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 9-5/8 5-1/8 x 8-1/4 3-1/8 x 9-5/8 5-1/8 x 8-1/4 3-1/8 x 11 5-1/8 x 9-5/8 3-1/8 x 15-1/8 6-3/4 x 11 5-1/8 x 13-3/4 6-3/4 x 12-3/8 5-1/8 x 8-1/4 3-1/8 x 12-3/8 6-3/4 x 8-1/4 3-1/8 x 13-3/4 6-3/4 x 9-5/8 5-1/8 x 11 6-3/4 x 9-5/8 5-1/8 x 12-3/8 3-1/8 x 9-5/8 5-1/8 x 12-3/8 3-1/8 x 11 5-1/8 x 13-3/4 3-1/8 x 15-1/8 5-1/8 x 15-1/8 3-1/8 x 16-1/2 5-1/8 x 15-1/8 5-1/8 x 15-1/8 3-1/8 x 8-1/4 6-3/4 x 15-1/8 3-1/8 x 8-1/4 3-1/8 x 8-1/4 5-1/8 x 8-1/4 3-1/8 x 9-5/8 5-1/8 x 8-1/4 3-1/8 x 11 5-1/8 x 8-1/4 3-1/8 x 12-3/8 5-1/8 x 9-5/8 5-1/8 x 12-3/8 6-3/4 x 11 5-1/8 x 13-3/4

;;;;;; ;;;; ;;; ;;;;;; ;; ;;;

36' 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 9-5/8 5-1/8 x 8-1/4 3-1/8 x 9-5/8 5-1/8 x 8-1/4 3-1/8 x 12-3/8 3-1/8 x 9-5/8 5-1/8 x 8-1/4 3-1/8 x 11 6-3/4 x 8-1/4 3-1/8 x 12-3/8 6-3/4 x 8-1/4 5-1/8 x 9-5/8 6-3/4 x 9-5/8 5-1/8 x 11 3-1/8 x 8-1/4 5-1/8 x 12-3/8 3-1/8 x 9-5/8 5-1/8 x 12-3/8 3-1/8 x 11 5-1/8 x 13-3/4 3-1/8 x 12-3/8 5-1/8 x 15-1/8 5-1/8 x 12-3/8 5-1/8 x 15-1/8 5-1/8 x 15-1/8 6-3/4 x 15-1/8 6-3/4 x 15-1/8 3-1/8 x 8-1/4 6-3/4 x 15-1/8 3-1/8 x 8-1/4 3-1/8 x 9-5/8 5-1/8 x 8-1/4 3-1/8 x 11 5-1/8 x 8-1/4 3-1/8 x 11 5-1/8 x 9-5/8 3-1/8 x 13-3/4 6-3/4 x 9-5/8 5-1/8 x 13-3/4 5-1/8 x 16-1/2 40' 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 5-1/8 x 8-1/4 3-1/8 x 9-5/8 5-1/8 x 8-1/4 3-1/8 x 11 5-1/8 x 8-1/4 3-1/8 x 12-3/8 3-1/8 x 9-5/8 6-3/4 x 8-1/4 3-1/8 x 11 6-3/4 x 8-1/4 5-1/8 x 9-5/8 6-3/4 x 8-1/4 5-1/8 x 11 3-1/8 x 8-1/4 5-1/8 x 12-3/8 3-1/8 x 9-5/8 5-1/8 x 12-3/8 3-1/8 x 9-5/8 5-1/8 x 13-3/4 3-1/8 x 11 5-1/8 x 15-1/8 3-1/8 x 13-3/4 6-3/4 x 13-3/4 5-1/8 x 13-3/4 6-3/4 x 13-3/4 5-1/8 x 15-1/8 6-3/4 x 15-1/8 6-3/4 x 15-1/8 3-1/8 x 8-1/4 3-1/8 x 8-1/4 5-1/8 x 8-1/4 3-1/8 x 9-5/8 5-1/8 x 8-1/4 3-1/8 x 11 5-1/8 x 8-1/4 3-1/8 x 12-3/8 6-3/4 x 8-1/4 5-1/8 x 11 6-3/4 x 9-5/8 5-1/8 x 15-1/8 5-1/8 x 16-1/2

6-3/4 x 8-1/4 3-1/8 x 12-3/8 6-3/4 x 9-5/8 5-1/8 x 11 6-3/4 x 9-5/8 5-1/8 x 11 3-1/8 x 9-5/8 5-1/8 x 12-3/8 3-1/8 x 9-5/8 5-1/8 x 13-3/4 3-1/8 x 12-3/8 5-1/8 x 13-3/4 3-1/8 x 15-1/8 5-1/8 x 15-1/8 5-1/8 x 13-3/4 5-1/8 x 16-1/2 6-3/4 x 13-3/4 3-1/8 x 8-1/4 6-3/4 x 15-1/8 3-1/8 x 8-1/4 3-1/8 x 9-5/8 5-1/8 x 8-1/4 3-1/8 x 9-5/8 5-1/8 x 8-1/4 3-1/8 x 11 5-1/8 x 8-1/4 3-1/8 x 13-3/4 6-3/4 x 9-5/8 5-1/8 x 13-3/4 5-1/8 x 15-1/8

Continued on next page

5

Glulam Selection Table for Window, Door and Garage Door Headers, continued

Roof Loading Clear Opening 4' 6' 8' Live 20 PSF Dead 15 PSF LDF 1.25 9' 10' 12' 16' 18' 16' 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 11 3-1/8 x 11 3-1/8 x 12-3/8 3-1/8 x 12-3/8 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 11 3-1/8 x 11 3-1/8 x 12-3/8 5-1/8 x 11 20' 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 11 3-1/8 x 11 3-1/8 x 12-3/8 5-1/8 x 11 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 9-5/8 3-1/8 x 9-5/8 3-1/8 x 12-3/8 5-1/8 x 9-5/8 3-1/8 x 13-3/4 5-1/8 x 11 Span of Supported Roof Framing 24' 28' 32' 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 9-5/8 3-1/8 x 9-5/8 3-1/8 x 9-5/8 3-1/8 x 9-5/8 3-1/8 x 9-5/8 5-1/8 x 8-1/4 3-1/8 x 12-3/8 3-1/8 x 12-3/8 3-1/8 x 13-3/4 5-1/8 x 11 5-1/8 x 11 5-1/8 x 11 3-1/8 x 13-3/4 3-1/8 x 13-3/4 3-1/8 x 15-1/8 5-1/8 x 11 5-1/8 x 12-3/8 6-3/4 x 11 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 9-5/8 3-1/8 x 9-5/8 3-1/8 x 12-3/8 5-1/8 x 11 3-1/8 x 13-3/4 5-1/8 x 12-3/8 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 9-5/8 5-1/8 x 8-1/4 3-1/8 x 13-3/4 5-1/8 x 11 3-1/8 x 15-1/8 6-3/4 x 11 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 9-5/8 5-1/8 x 8-1/4 3-1/8 x 11 5-1/8 x 9-5/8 3-1/8 x 13-3/4 6-3/4 x 11 3-1/8 x 16-1/2 6-3/4 x 12-3/8 36' 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 9-5/8 5-1/8 x 8-1/4 3-1/8 x 11 5-1/8 x 8-1/4 3-1/8 x 13-3/4 5-1/8 x 11 3-1/8 x 15-1/8 6-3/4 x 12-3/8 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 5-1/8 x 8-1/4 3-1/8 x 9-5/8 5-1/8 x 8-1/4 3-1/8 x 11 5-1/8 x 9-5/8 3-1/8 x 15-1/8 6-3/4 x 11 5-1/8 x 13-3/4 6-3/4 x 12-3/8 40' 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 5-1/8 x 8-1/4 3-1/8 x 9-5/8 5-1/8 x 8-1/4 3-1/8 x 11 5-1/8 x 9-5/8 3-1/8 x 15-1/8 6-3/4 x 11 5-1/8 x 13-3/4 6-3/4 x 12-3/8 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 3-1/8 x 8-1/4 5-1/8 x 8-1/4 3-1/8 x 9-5/8 5-1/8 x 8-1/4 3-1/8 x 9-5/8 5-1/8 x 8-1/4 3-1/8 x 12-3/8 5-1/8 x 9-5/8 5-1/8 x 12-3/8 6-3/4 x 11 5-1/8 x 13-3/4 7 x 11-1/4

4' 6' 8' Live 20 PSF Dead 20 PSF LDF 1.25 9' 10' 12' 16' 18'

Notes: 1. This table is for headers carrying roof loads only. For all other load conditions use the PLF tables. 2. Deflection is limited to L/240 for Live Load and L/180 for Total Load. 3. Design span is assumed to be the clear opening plus the bearing length of 1-1/2" (1 trimmer) or 3.0" (2 trimmers). 4. For bearing lengths longer than 3.0", use the Allowable Roof Load Tables to get required header size. Use of longer bearing lengths may allow the use of a smaller Glulam. 5. The header size is based on the load carried by 1/2 the span of the roof framing plus a 24" overhang. 6. It is assumed that the header has the truss or rafter framing attached to its top, and is supported laterally at the bearing points. 7. Live load reductions may be taken per BOCA, UBC and SBC. Live Load reductions have not been taken to produce the table above. 8. For loads other than those shown, see Roof PLF Table, or use a load condition that applies a higher load than you have. 9. Beam weight is included in all tables and does not have to be added to the applied load. 10. Blank spaces require more than a 1-1/2" bearing. 11. Beams and headers are assumed to be used under dry conditions and normal temperatures. 12. This table assumes a uniform load condition. Any concentrated load applications must be analyzed separately or converted to an equivalent uniform load. 13. Dead and live loads used to select a beam or header should be equal to or greater than the actual loads applied.

Window, Door, and Garage Door Header Example Problem

Load Conditions: Live = 30 psf Dead = 15 psf LDF = 1.15 12' 32' 3-1/8 x 12-3/8 w/2 trimmers 5-1/8 x 9-5/8 w/1 trimmer

Load Duration Factor (LDF)

LDF 1.00 1.15 1.25 Duration 10 years; normal loads 2 month; snow load 7 days; non-snow or construction

Clear Opening: Span of Supported Roof Framing: Anthony 24F Glulam Selected:

6

Anthony 24F Glulam

Allowable Floor Load Tables LDF=1.00 3-1/8" & 5-1/8" Widths - Standard Depths

Key - for each clear span there are three numbers: Row 1: Maximum Total Load with LDF of 1.0, and deflection limited to L/240 Row 2: Maximum Live Load limited by deflection of L/360 Row 3: Required Bearing Length in trimmer thickness (e.g., 1.5 = 1 trimmer, 3.0 = 2 trimmers, etc.) These tables can be used to size simple span beams and headers that carry uniform loads. The PLF loads must be calculated and take into account all floor and roof framing loads coming onto the beam or header. Codes do allow live load reductions. See appropriate code sections.

Allowable Loads for Anthony Glulam in Pounds per Linear Foot

Actual

Span 6' 7' 8' 9' 10' 11' 12' 13' 14' 15' 16' 17' 18' 19' 20' 21' 22' 23' 24' 25' 26' 27' 28' 29' 30' 32' 8 1/4 1569 1569 3 1151 1137 3 879 762 3 693 535 1.5 560 390 1.5 432 293 1.5 332 226 1.5 259 177 1.5 206 142 1.5 166 116 1.5 136 95 1.5 112 79 1.5 93 67 1.5 78 57 1.5 66 49 1.5 56 42 1.5 48 37 1.5 41 32 1.5 35 28 1.5 30 25 1.5 26 22 1.5 23 20 1.5 20 18 1.5 17 16 1.5 15 14 1.5 11 11 1.5 9 5/8 2136 2136 3 1567 1567 3 1198 1198 3 945 849 3 764 619 3 630 465 3 528 358 1.5 415 282 1.5 330 226 1.5 267 183 1.5 219 151 1.5 181 126 1.5 151 106 1.5 127 90 1.5 108 77 1.5 92 67 1.5 79 58 1.5 68 51 1.5 59 45 1.5 51 40 1.5 45 35 1.5 39 31 1.5 34 28 1.5 30 25 1.5 26 23 1.5 20 19 1.5 11 2792 2792 4.5 2049 2049 4.5 1566 1566 3 1236 1236 3 999 924 3 824 694 3 691 535 3 587 421 3 496 337 3 401 274 1.5 329 226 1.5 273 188 1.5 228 158 1.5 193 135 1.5 164 116 1.5 140 100 1.5 121 87 1.5 105 76 1.5 91 67 1.5 79 59 1.5 70 53 1.5 61 47 1.5 54 42 1.5 48 38 1.5 42 34 1.5 33 28 1.5

3 1/8" Depth (in.)

12 3/8 3525 3525 6 2594 2594 4.5 1984 1984 4.5 1565 1565 4.5 1266 1266 3 1044 989 3 876 762 3 745 599 3 641 480 3 557 390 3 471 321 3 391 268 1.5 328 226 1.5 277 192 1.5 236 165 1.5 203 142 1.5 175 124 1.5 152 108 1.5 132 95 1.5 116 84 1.5 102 75 1.5 90 67 1.5 79 60 1.5 70 54 1.5 63 49 1.5 50 40 1.5 13 3/4 4160 4160 6 3204 3204 6 2450 2450 4.5 1933 1933 4.5 1564 1564 4.5 1290 1290 4.5 1082 1045 3 921 822 3 792 658 3 689 535 3 604 441 3 534 367 3 453 310 3 383 263 3 327 226 1.5 281 195 1.5 243 170 1.5 211 148 1.5 184 131 1.5 162 116 1.5 142 103 1.5 126 92 1.5 112 82 1.5 99 74 1.5 89 67 1.5 71 55 1.5 15 1/8 4878 4878 7.5 3786 3786 7.5 2966 2966 6 2341 2341 6 1894 1894 4.5 1563 1563 4.5 1311 1311 4.5 1115 1094 4.5 960 876 3 834 712 3 732 587 3 647 489 3 576 412 3 513 350 3 438 300 3 376 259 3 326 226 3 283 197 1.5 248 174 1.5 218 154 1.5 192 137 1.5 170 122 1.5 151 109 1.5 135 99 1.5 121 89 1.5 97 73 1.5 16 1/2 5698 5698 9 4354 4354 7.5 3522 3522 7.5 2787 2787 6 2255 2255 6 1861 1861 6 1562 1562 4.5 1328 1328 4.5 1144 1137 4.5 994 924 4.5 872 762 4.5 771 635 3 686 535 3 614 455 3 553 390 3 491 337 3 425 293 3 371 256 3 325 226 3 286 200 3 252 177 1.5 224 158 1.5 199 142 1.5 178 128 1.5 159 116 1.5 129 95 1.5 17 7/8 6642 6642 10.5 4986 4986 9 3990 3990 7.5 3272 3272 7.5 2648 2648 7.5 2185 2185 6 1834 1834 6 1560 1560 6 1343 1343 4.5 1168 1168 4.5 1025 968 4.5 906 807 4.5 807 680 4.5 722 578 4.5 651 496 3 589 428 3 535 372 3 474 326 3 415 287 3 366 254 3 323 226 3 287 202 3 256 181 3 229 163 1.5 205 147 1.5 166 121 1.5 11 4578 4578 4.5 3360 3360 4.5 2569 2569 3 2026 2026 3 1638 1516 3 1351 1139 3 1133 877 3 963 690 3 813 552 3 658 449 1.5 540 370 1.5 448 309 1.5 375 260 1.5 316 221 1.5 269 189 1.5 230 164 1.5 198 142 1.5 172 125 1.5 149 110 1.5 130 97 1.5 114 86 1.5 100 77 1.5 88 69 1.5 78 62 1.5 69 56 1.5 54 46 1.5 12 3/8 5781 5781 6 4254 4254 4.5 3253 3253 4.5 2567 2567 4.5 2076 2076 3 1713 1622 3 1436 1249 3 1221 982 3 1051 787 3 913 640 3 773 527 3 642 439 1.5 538 370 1.5 455 315 1.5 388 270 1.5 332 233 1.5 287 203 1.5 249 177 1.5 217 156 1.5 190 138 1.5 167 123 1.5 147 110 1.5 130 98 1.5 116 88 1.5 103 80 1.5 82 66 1.5 13 3/4 6822 6822 6 5254 5254 6 4018 4018 4.5 3171 3171 4.5 2565 2565 4.5 2116 2116 4.5 1775 1713 3 1510 1348 3 1299 1079 3 1129 877 3 990 723 3 875 603 3 742 508 3 628 432 3 536 370 1.5 460 320 1.5 398 278 1.5 346 243 1.5 302 214 1.5 265 189 1.5 234 168 1.5 207 150 1.5 183 135 1.5 163 121 1.5 145 110 1.5 116 90 1.5 15 1/8 8000 8000 7.5 6209 6209 7.5 4864 4864 6 3839 3839 6 3105 3105 4.5 2563 2563 4.5 2150 2150 4.5 1829 1794 4.5 1574 1436 3 1369 1168 3 1200 962 3 1060 802 3 940 676 3 839 575 3 718 493 3 617 426 3 534 370 3 465 324 1.5 407 285 1.5 357 252 1.5 315 224 1.5 279 200 1.5 248 180 1.5 221 162 1.5 198 146 1.5 159 120 1.5

5 1/8" Depth (in.)

16 1/2 9344 9344 9 7140 7140 7.5 5776 5776 7.5 4571 4571 6 3698 3698 6 3052 3052 6 2561 2561 4.5 2179 2179 4.5 1875 1864 4.5 1631 1516 4.5 1427 1249 4.5 1258 1041 3 1116 877 3 997 746 3 895 640 3 806 552 3 698 480 3 608 420 3 532 370 3 468 327 3 414 291 1.5 367 260 1.5 327 233 1.5 292 210 1.5 261 189 1.5 211 156 1.5 17 7/8 10892 10892 10.5 8177 8177 9 6544 6544 7.5 5366 5366 7.5 4342 4342 7.5 3584 3584 6 3008 3008 6 2559 2559 6 2203 2203 4.5 1910 1910 4.5 1670 1588 4.5 1472 1324 4.5 1307 1115 4.5 1167 948 3 1048 813 3 946 702 3 858 611 3 777 535 3 681 471 3 600 416 3 530 370 3 471 330 3 420 296 3 375 267 1.5 337 241 1.5 273 199 1.5 19 1/4 12696 12696 12 9340 9340 10.5 7385 7385 9 6106 6106 9 5038 5038 7.5 4159 4159 7.5 3490 3490 6 2970 2970 6 2548 2548 6 2209 2209 4.5 1932 1932 4.5 1703 1654 4.5 1512 1393 4.5 1350 1184 4.5 1213 1016 4.5 1095 877 4.5 993 763 3 904 668 3 826 588 3 753 520 3 667 462 3 592 413 3 528 370 3 473 333 3 425 301 3 345 248 1.5 20 5/8 14821 14821 15 10653 10653 12 8312 8312 10.5 6812 6812 9 5770 5770 9 4776 4776 7.5 4009 4009 7.5 3401 3401 7.5 2917 2917 6 2529 2529 6 2212 2212 6 1950 1950 4.5 1731 1713 4.5 1547 1457 4.5 1389 1249 4.5 1254 1079 4.5 1138 938 4.5 1036 821 4.5 947 723 4.5 869 640 3 800 569 3 733 508 3 654 455 3 586 410 3 526 370 3 429 305 3 22 17365 17365 16.5 12146 12146 13.5 9336 9336 12 7580 7580 10.5 6378 6378 10.5 5436 5436 9 4552 4552 9 3859 3859 7.5 3311 3311 7.5 2870 2870 6 2510 2510 6 2214 2214 6 1965 1965 6 1756 1756 4.5 1578 1516 4.5 1425 1309 4.5 1292 1139 4.5 1177 997 4.5 1076 877 4.5 987 776 4.5 909 690 4.5 839 616 4.5 776 552 3 715 497 3 643 449 3 525 370 3 23 3/8 20463 20463 21 13861 13861 15 10476 10476 13.5 8417 8417 12 7033 7033 10.5 6038 6038 10.5 5126 5126 9 4345 4345 9 3728 3728 7.5 3232 3232 7.5 2827 2827 7.5 2493 2493 6 2214 2214 6 1978 1978 6 1778 1778 6 1605 1571 6 1456 1366 4.5 1327 1196 4.5 1213 1052 4.5 1113 931 4.5 1025 828 4.5 946 739 4.5 876 663 4.5 813 596 4.5 756 539 4.5 633 444 3

7

Anthony 24F Glulam

Allowable Roof Load Tables LDF=1.15

Key - for each clear span there are three numbers: Row 1: Maximum Total Load with LDF of 1.15, and deflection limited to L/180 Row 2: Maximum Live Load limited by deflection of L/240 Row 3: Required Bearing Length in trimmer thickness (e.g., 1.5 = 1 trimmer, 3.0 = 2 trimmers, etc.)

3-1/8" & 5-1/8" Widths - Standard Depths

These tables can be used to size simple span beams and headers that carry uniform loads. The PLF loads must be calculated and take into account all floor and roof framing loads coming onto the beam or header.

Allowable Loads for Anthony Glulam in Pounds per Linear Foot

Actual

Span 6' 7' 8' 9' 10' 11' 12' 13' 14' 15' 16' 17' 18' 19' 20' 21' 22' 23' 24' 25' 26' 27' 28' 29' 30' 32' 8 1/4 1805 1805 3 1324 1324 3 1012 1012 3 798 798 3 645 585 1.5 532 439 1.5 444 338 1.5 348 266 1.5 277 213 1.5 224 173 1.5 183 143 1.5 152 119 1.5 127 100 1.5 107 85 1.5 91 73 1.5 77 63 1.5 66 55 1.5 57 48 1.5 49 42 1.5 43 37 1.5 37 33 1.5 33 30 1.5 29 27 1.5 25 24 1.5 22 22 1.5 17 17 1.5 9 5/8 2458 2458 4.5 1804 1804 3 1379 1379 3 1088 1088 3 880 880 3 726 698 3 608 538 3 517 423 1.5 443 338 1.5 359 275 1.5 294 227 1.5 244 189 1.5 204 159 1.5 172 135 1.5 147 116 1.5 126 100 1.5 108 87 1.5 94 76 1.5 81 67 1.5 71 59 1.5 62 53 1.5 55 47 1.5 48 42 1.5 43 38 1.5 38 34 1.5 30 28 1.5 11 3212 3212 4.5 2357 2357 4.5 1803 1803 4.5 1422 1422 3 1150 1150 3 949 949 3 796 796 3 677 631 3 582 505 3 506 411 3 442 338 3 367 282 1.5 308 238 1.5 260 202 1.5 222 173 1.5 190 150 1.5 164 130 1.5 143 114 1.5 124 100 1.5 109 89 1.5 96 79 1.5 85 70 1.5 75 63 1.5 66 57 1.5 59 51 1.5 47 42 1.5

3 1/8" Depth (in.)

12 3/8 4056 4056 6 2985 2985 6 2283 2283 4.5 1801 1801 4.5 1457 1457 4.5 1202 1202 3 1009 1009 3 858 858 3 738 719 3 642 585 3 563 482 3 497 402 3 441 338 3 373 288 3 319 247 1.5 274 213 1.5 237 185 1.5 206 162 1.5 180 143 1.5 158 126 1.5 139 112 1.5 123 100 1.5 109 90 1.5 97 81 1.5 87 73 1.5 70 60 1.5 13 3/4 4785 4785 7.5 3686 3686 6 2819 2819 6 2225 2225 6 1800 1800 4.5 1486 1486 4.5 1247 1247 4.5 1060 1060 4.5 913 913 3 794 794 3 696 661 3 615 551 3 548 464 3 490 395 3 440 338 3 378 292 3 327 254 3 285 223 1.5 250 196 1.5 219 173 1.5 194 154 1.5 172 138 1.5 153 123 1.5 136 111 1.5 122 100 1.5 99 83 1.5 15 1/8 5612 5612 9 4356 4356 7.5 3413 3413 7.5 2694 2694 6 2180 2180 6 1799 1799 4.5 1510 1510 4.5 1284 1284 4.5 1106 1106 4.5 962 962 4.5 844 844 3 746 734 3 664 618 3 594 525 3 535 451 3 484 389 3 439 338 3 382 296 3 335 261 3 295 231 3 261 205 1.5 231 183 1.5 206 164 1.5 184 148 1.5 165 133 1.5 134 110 1.5 16 1/2 6554 6554 10.5 5009 5009 9 4052 4052 9 3207 3207 7.5 2595 2595 6 2142 2142 6 1798 1798 6 1530 1530 4.5 1317 1317 4.5 1146 1146 4.5 1005 1005 4.5 889 889 4.5 791 791 4.5 709 682 3 638 585 3 578 505 3 525 439 3 479 385 3 437 338 3 385 299 3 341 266 3 303 238 3 270 213 3 242 192 3 217 173 1.5 176 143 1.5 17 7/8 7640 7640 12 5736 5736 10.5 4591 4591 9 3765 3765 9 3047 3047 7.5 2515 2515 7.5 2111 2111 6 1797 1797 6 1547 1547 6 1346 1346 4.5 1181 1181 4.5 1044 1044 4.5 930 930 4.5 833 833 4.5 750 744 4.5 679 642 4.5 618 559 3 564 489 3 515 430 3 473 381 3 435 338 3 388 302 3 346 271 3 310 244 3 279 220 3 227 182 3 11 5267 5267 4.5 3866 3866 4.5 2956 2956 4.5 2333 2333 3 1886 1886 3 1556 1556 3 1305 1305 3 1110 1035 3 955 829 3 830 674 3 725 555 3 602 463 1.5 505 390 1.5 427 332 1.5 364 284 1.5 312 246 1.5 269 214 1.5 234 187 1.5 204 164 1.5 179 146 1.5 157 129 1.5 139 116 1.5 123 104 1.5 109 93 1.5 97 84 1.5 77 69 1.5 12 3/8 6651 6651 6 4895 4895 6 3744 3744 4.5 2954 2954 4.5 2390 2390 4.5 1972 1972 3 1654 1654 3 1407 1407 3 1211 1180 3 1053 959 3 923 790 3 816 659 3 723 555 3 612 472 3 522 405 1.5 449 350 1.5 388 304 1.5 338 266 1.5 295 234 1.5 259 207 1.5 228 184 1.5 202 164 1.5 179 147 1.5 160 133 1.5 143 120 1.5 115 99 1.5 13 3/4 7848 7848 7.5 6045 6045 6 4624 4624 6 3649 3649 6 2952 2952 4.5 2437 2437 4.5 2044 2044 4.5 1739 1739 4.5 1497 1497 3 1302 1302 3 1142 1084 3 1009 904 3 898 761 3 803 647 3 721 555 3 620 480 3 537 417 3 468 365 1.5 409 321 1.5 360 284 1.5 318 253 1.5 282 226 1.5 251 202 1.5 224 182 1.5 200 164 1.5 162 136 1.5 15 1/8 9203 9203 9 7144 7144 7.5 5597 5597 7.5 4418 4418 6 3574 3574 6 2950 2950 4.5 2476 2476 4.5 2106 2106 4.5 1813 1813 4.5 1577 1577 4.5 1383 1383 3 1222 1203 3 1084 1014 3 968 862 3 870 739 3 785 638 3 712 555 3 627 486 3 549 428 3 483 378 3 427 336 1.5 379 300 1.5 338 269 1.5 302 242 1.5 271 219 1.5 220 180 1.5

5 1/8" Depth (in.)

16 1/2 10749 10749 10.5 8214 8214 9 6645 6645 9 5260 5260 7.5 4256 4256 6 3513 3513 6 2949 2949 6 2509 2509 4.5 2160 2160 4.5 1879 1879 4.5 1645 1645 4.5 1450 1450 4.5 1287 1287 4.5 1150 1119 3 1032 959 3 932 829 3 845 721 3 770 631 3 703 555 3 632 491 3 559 437 3 497 390 3 443 350 3 397 315 3 356 284 1.5 289 234 1.5 17 7/8 12530 12530 12 9408 9408 10.5 7529 7529 9 6175 6175 9 4997 4997 7.5 4125 4125 7.5 3462 3462 6 2947 2947 6 2537 2537 6 2200 2200 4.5 1924 1924 4.5 1697 1697 4.5 1506 1506 4.5 1346 1346 4.5 1209 1209 4.5 1091 1054 4.5 990 916 3 902 802 3 824 706 3 756 624 3 696 555 3 636 496 3 568 444 3 509 400 3 457 361 3 372 298 3 19 1/4 14604 14604 13.5 10745 10745 12 8497 8497 10.5 7025 7025 9 5797 5797 9 4787 4787 7.5 4018 4018 7.5 3419 3419 7.5 2935 2935 6 2544 2544 6 2226 2226 6 1962 1962 4.5 1742 1742 4.5 1557 1557 4.5 1399 1399 4.5 1263 1263 4.5 1146 1144 4.5 1044 1002 4.5 954 882 4.5 875 780 3 806 693 3 744 619 3 688 555 3 639 500 3 575 451 3 469 372 3 20 5/8 17049 17049 16.5 12255 12255 13.5 9563 9563 12 7839 7839 10.5 6640 6640 10.5 5497 5497 9 4614 4614 9 3915 3915 7.5 3359 3359 7.5 2912 2912 6 2548 2548 6 2247 2247 6 1995 1995 6 1783 1783 6 1602 1602 4.5 1447 1447 4.5 1313 1313 4.5 1196 1196 4.5 1094 1084 4.5 1003 959 4.5 924 853 4.5 853 761 4.5 790 683 3 733 615 3 682 555 3 581 457 3 22 19975 19975 19.5 13973 13973 15 10741 10741 13.5 8722 8722 12 7340 7340 10.5 6256 6256 10.5 5240 5240 9 4442 4442 9 3812 3812 7.5 3305 3305 7.5 2892 2892 7.5 2550 2550 6 2265 2265 6 2024 2024 6 1819 1819 6 1643 1643 6 1491 1491 4.5 1358 1358 4.5 1242 1242 4.5 1140 1140 4.5 1050 1035 4.5 969 924 4.5 897 829 4.5 833 746 4.5 775 674 4.5 675 555 3 23 3/8 23538 23538 24 15945 15945 18 12052 12052 15 9684 9684 13.5 8092 8092 12 6949 6949 12 5899 5899 10.5 5002 5002 10.5 4292 4292 9 3722 3722 9 3256 3256 7.5 2872 2872 7.5 2551 2551 7.5 2280 2280 6 2049 2049 6 1851 1851 6 1680 1680 6 1531 1531 6 1400 1400 4.5 1285 1285 4.5 1183 1183 4.5 1093 1093 4.5 1012 994 4.5 939 895 4.5 874 808 4.5 762 666 4.5

8

Anthony 24F Glulam

Allowable Roof Load Tables LDF=1.25

Key - for each clear span there are three numbers: Row 1: Maximum Total Load with LDF of 1.25, and deflection limited to L/180 Row 2: Maximum Live Load limited by deflection of L/240 Row 3: Required Bearing Length in trimmer thickness (e.g., 1.5 = 1 trimmer, 3.0 = 2 trimmers, etc.)

3-1/8" & 5-1/8" Widths - Standard Depths

These tables can be used to size simple span beams and headers that carry uniform loads. The PLF loads must be calculated and take into account all floor and roof framing loads coming onto the beam or header.

Allowable Loads for Anthony Glulam in Pounds per Linear Foot

Actual

Span 6' 7' 8' 9' 10' 11' 12' 13' 14' 15' 16' 17' 18' 19' 20' 21' 22' 23' 24' 25' 26' 27' 28' 29' 30' 32' 8 1/4 1962 1962 3 1440 1440 3 1101 1101 3 868 802 3 702 585 3 579 439 1.5 444 338 1.5 348 266 1.5 277 213 1.5 224 173 1.5 183 143 1.5 152 119 1.5 127 100 1.5 107 85 1.5 91 73 1.5 77 63 1.5 66 55 1.5 57 48 1.5 49 42 1.5 43 37 1.5 37 33 1.5 33 30 1.5 29 27 1.5 25 24 1.5 22 22 1.5 17 17 1.5 9 5/8 2672 2672 4.5 1961 1961 4.5 1500 1500 3 1183 1183 3 957 929 3 789 698 3 662 538 3 556 423 3 443 338 1.5 359 275 1.5 294 227 1.5 244 189 1.5 204 159 1.5 172 135 1.5 147 116 1.5 126 100 1.5 108 87 1.5 94 76 1.5 81 67 1.5 71 59 1.5 62 53 1.5 55 47 1.5 48 42 1.5 43 38 1.5 38 34 1.5 30 28 1.5 11 3492 3492 6 2563 2563 4.5 1960 1960 4.5 1547 1547 4.5 1251 1251 3 1032 1032 3 866 802 3 736 631 3 634 505 3 538 411 3 442 338 3 367 282 1.5 308 238 1.5 260 202 1.5 222 173 1.5 190 150 1.5 164 130 1.5 143 114 1.5 124 100 1.5 109 89 1.5 96 79 1.5 85 70 1.5 75 63 1.5 66 57 1.5 59 51 1.5 47 42 1.5

3 1/8" Depth (in.)

12 3/8 4409 4409 7.5 3245 3245 6 2482 2482 4.5 1959 1959 4.5 1585 1585 4.5 1308 1308 4.5 1097 1097 3 933 899 3 803 719 3 699 585 3 613 482 3 525 402 3 441 338 3 373 288 3 319 247 1.5 274 213 1.5 237 185 1.5 206 162 1.5 180 143 1.5 158 126 1.5 139 112 1.5 123 100 1.5 109 90 1.5 97 81 1.5 87 73 1.5 70 60 1.5 13 3/4 5203 5203 7.5 4008 4008 7.5 3066 3066 6 2420 2420 6 1958 1958 4.5 1616 1616 4.5 1356 1356 4.5 1154 1154 4.5 993 987 4.5 864 802 3 758 661 3 670 551 3 596 464 3 515 395 3 440 338 3 378 292 3 327 254 3 285 223 1.5 250 196 1.5 219 173 1.5 194 154 1.5 172 138 1.5 153 123 1.5 136 111 1.5 122 100 1.5 99 83 1.5 15 1/8 6101 6101 9 4736 4736 9 3711 3711 7.5 2929 2929 7.5 2370 2370 6 1957 1957 6 1642 1642 4.5 1397 1397 4.5 1203 1203 4.5 1046 1046 4.5 918 880 4.5 812 734 4.5 723 618 3 647 525 3 583 451 3 506 389 3 439 338 3 382 296 3 335 261 3 295 231 3 261 205 1.5 231 183 1.5 206 164 1.5 184 148 1.5 165 133 1.5 134 110 1.5 16 1/2 7125 7125 10.5 5446 5446 10.5 4406 4406 9 3487 3487 7.5 2822 2822 7.5 2330 2330 6 1955 1955 6 1664 1664 6 1433 1433 4.5 1246 1246 4.5 1094 1094 4.5 967 952 4.5 861 802 4.5 772 682 4.5 695 585 4.5 629 505 3 572 439 3 499 385 3 437 338 3 385 299 3 341 266 3 303 238 3 270 213 3 242 192 3 217 173 1.5 176 143 1.5 17 7/8 8306 8306 13.5 6236 6236 12 4991 4991 10.5 4094 4094 9 3313 3313 9 2736 2736 7.5 2296 2296 7.5 1954 1954 6 1683 1683 6 1464 1464 6 1285 1285 6 1137 1137 4.5 1012 1012 4.5 907 867 4.5 817 744 4.5 740 642 4.5 673 559 4.5 614 489 4.5 559 430 3 493 381 3 436 338 3 388 302 3 346 271 3 310 244 3 279 220 3 227 182 3 11 5727 5727 6 4203 4203 4.5 3215 3215 4.5 2537 2537 4.5 2052 2052 3 1693 1693 3 1420 1316 3 1208 1035 3 1039 829 3 883 674 3 725 555 3 602 463 1.5 505 390 1.5 427 332 1.5 364 284 1.5 312 246 1.5 269 214 1.5 234 187 1.5 204 164 1.5 179 146 1.5 157 129 1.5 139 116 1.5 123 104 1.5 109 93 1.5 97 84 1.5 77 69 1.5 12 3/8 7231 7231 7.5 5322 5322 6 4071 4071 4.5 3213 3213 4.5 2599 2599 4.5 2145 2145 4.5 1800 1800 3 1531 1474 3 1318 1180 3 1146 959 3 1005 790 3 861 659 3 723 555 3 612 472 3 522 405 1.5 449 350 1.5 388 304 1.5 338 266 1.5 295 234 1.5 259 207 1.5 228 184 1.5 202 164 1.5 179 147 1.5 160 133 1.5 143 120 1.5 115 99 1.5 13 3/4 8532 8532 7.5 6572 6572 7.5 5028 5028 6 3968 3968 6 3211 3211 4.5 2650 2650 4.5 2224 2224 4.5 1892 1892 4.5 1629 1618 4.5 1416 1316 3 1243 1084 3 1098 904 3 978 761 3 844 647 3 721 555 3 620 480 3 537 417 3 468 365 1.5 409 321 1.5 360 284 1.5 318 253 1.5 282 226 1.5 251 202 1.5 224 182 1.5 200 164 1.5 162 136 1.5 15 1/8 10005 10005 9 7767 7767 9 6085 6085 7.5 4804 4804 7.5 3887 3887 6 3209 3209 6 2693 2693 4.5 2291 2291 4.5 1973 1973 4.5 1716 1716 4.5 1506 1443 4.5 1330 1203 4.5 1181 1014 3 1054 862 3 947 739 3 830 638 3 719 555 3 627 486 3 549 428 3 483 378 3 427 336 1.5 379 300 1.5 338 269 1.5 302 242 1.5 271 219 1.5 220 180 1.5

5 1/8" Depth (in.)

16 1/2 11686 11686 10.5 8931 8931 10.5 7225 7225 9 5719 5719 7.5 4628 4628 7.5 3821 3821 6 3207 3207 6 2729 2729 6 2350 2350 4.5 2044 2044 4.5 1790 1790 4.5 1578 1562 4.5 1401 1316 4.5 1251 1119 4.5 1124 959 4.5 1015 829 3 921 721 3 818 631 3 717 555 3 632 491 3 559 437 3 497 390 3 443 350 3 397 315 3 356 284 1.5 289 234 1.5 17 7/8 13622 13622 13.5 10228 10228 12 8186 8186 10.5 6714 6714 9 5434 5434 9 4486 4486 7.5 3766 3766 7.5 3205 3205 6 2760 2760 6 2394 2394 6 2094 2094 6 1846 1846 4.5 1639 1639 4.5 1465 1422 4.5 1316 1220 4.5 1189 1054 4.5 1078 916 4.5 982 802 4.5 898 706 3 808 624 3 715 555 3 636 496 3 568 444 3 509 400 3 457 361 3 372 298 3 19 1/4 15876 15876 15 11682 11682 13.5 9238 9238 12 7639 7639 10.5 6304 6304 9 5205 5205 9 4369 4369 7.5 3719 3719 7.5 3192 3192 7.5 2768 2768 6 2421 2421 6 2135 2135 6 1896 1896 6 1695 1695 4.5 1523 1523 4.5 1375 1316 4.5 1248 1144 4.5 1137 1002 4.5 1040 882 4.5 954 780 4.5 878 693 4.5 799 619 3 713 555 3 639 500 3 575 451 3 469 372 3 20 5/8 18534 18534 18 13323 13323 15 10397 10397 13.5 8523 8523 12 7220 7220 10.5 5977 5977 10.5 5018 5018 9 4258 4258 9 3654 3654 7.5 3168 3168 7.5 2772 2772 7.5 2445 2445 6 2171 2171 6 1940 1940 6 1744 1744 6 1575 1575 4.5 1429 1408 4.5 1302 1232 4.5 1191 1084 4.5 1093 959 4.5 1007 853 4.5 929 761 4.5 861 683 4.5 791 615 4.5 712 555 3 581 457 3 22 21714 21714 22.5 15191 15191 16.5 11678 11678 15 9483 9483 13.5 7981 7981 12 6803 6803 12 5698 5698 10.5 4831 4831 9 4146 4146 9 3595 3595 7.5 3146 3146 7.5 2775 2775 7.5 2464 2464 7.5 2203 2203 6 1980 1980 6 1788 1788 6 1623 1623 6 1479 1479 6 1353 1316 4.5 1242 1164 4.5 1143 1035 4.5 1056 924 4.5 978 829 4.5 908 746 4.5 845 674 4.5 710 555 4.5 23 3/8 25587 25587 27 17334 17334 19.5 13103 13103 16.5 10529 10529 15 8799 8799 13.5 7556 7556 12 6415 6415 12 5439 5439 10.5 4668 4668 10.5 4048 4048 9 3542 3542 9 3125 3125 7.5 2776 2776 7.5 2481 2481 7.5 2230 2230 7.5 2015 2015 6 1829 1829 6 1666 1666 6 1525 1525 6 1400 1396 6 1289 1241 4.5 1191 1109 4.5 1103 994 4.5 1024 895 4.5 953 808 4.5 831 666 4.5

9

Anthony 24F Glulam

Allowable Floor Load Tables LDF=1.00

Key - for each clear span there are three numbers: Row 1: Maximum Total Load with LDF of 1.0, and deflection limited to L/240 Row 2: Maximum Live Load limited by deflection of L/360 Row 3: Required Bearing Length in trimmer thickness (e.g., 1.5 = 1 trimmer, 3.0 = 2 trimmers, etc.)

3-1/2" & 5-1/2" Widths - Standard Depths

These tables can be used to size simple span beams and headers that carry uniform loads. The PLF loads must be calculated and take into account all floor and roof framing loads coming onto the beam or header.

Allowable Loads for Anthony Glulam in Pounds per Linear Foot

Actual

Span 6' 7' 8' 9' 10' 11' 12' 13' 14' 15' 16' 17' 18' 19' 20' 21' 22' 23' 24' 25' 26' 27' 28' 29' 30' 32' 8 1/4 1757 1757 3 1289 1273 3 985 853 3 776 599 1.5 627 437 1.5 484 328 1.5 371 253 1.5 290 199 1.5 231 159 1.5 186 129 1.5 152 107 1.5 126 89 1.5 105 75 1.5 88 64 1.5 74 55 1.5 63 47 1.5 54 41 1.5 46 36 1.5 40 32 1.5 34 28 1.5 29 25 1.5 25 22 1.5 22 20 1.5 19 18 1.5 16 16 1.5 12 12 1.5 9 5/8 2393 2393 3 1755 1755 3 1342 1342 3 1058 951 3 856 694 3 705 521 3 591 401 1.5 464 316 1.5 370 253 1.5 299 205 1.5 245 169 1.5 203 141 1.5 169 119 1.5 143 101 1.5 121 87 1.5 103 75 1.5 89 65 1.5 76 57 1.5 66 50 1.5 57 44 1.5 50 39 1.5 44 35 1.5 38 32 1.5 34 28 1.5 29 26 1.5 23 21 1.5 11 3127 3127 4.5 2294 2294 4.5 1754 1754 3 1384 1384 3 1119 1035 3 923 778 3 774 599 3 658 471 3 555 377 3 450 307 1.5 369 253 1.5 306 211 1.5 256 178 1.5 216 151 1.5 184 129 1.5 157 112 1.5 135 97 1.5 117 85 1.5 102 75 1.5 89 66 1.5 78 59 1.5 68 53 1.5 60 47 1.5 53 42 1.5 47 38 1.5 37 32 1.5

3 1/2" Depth (in.)

12 3/8 3948 3948 6 2905 2905 4.5 2222 2222 4.5 1753 1753 4.5 1418 1418 3 1170 1107 3 981 853 3 834 671 3 718 537 3 624 437 3 528 360 3 438 300 1.5 367 253 1.5 311 215 1.5 265 184 1.5 227 159 1.5 196 138 1.5 170 121 1.5 148 107 1.5 130 94 1.5 114 84 1.5 101 75 1.5 89 67 1.5 79 60 1.5 70 55 1.5 56 45 1.5 13 3/4 4659 4659 6 3588 3588 6 2744 2744 4.5 2165 2165 4.5 1752 1752 4.5 1445 1445 4.5 1212 1170 3 1031 920 3 887 737 3 771 599 3 676 494 3 598 412 3 507 347 3 429 295 3 366 253 1.5 314 218 1.5 272 190 1.5 236 166 1.5 206 146 1.5 181 129 1.5 160 115 1.5 141 103 1.5 125 92 1.5 111 83 1.5 99 75 1.5 80 62 1.5 15 1/8 5463 5463 7.5 4240 4240 7.5 3322 3322 6 2622 2622 6 2121 2121 4.5 1750 1750 4.5 1468 1468 4.5 1249 1225 4.5 1075 981 3 935 797 3 820 657 3 724 548 3 645 461 3 574 392 3 490 336 3 422 291 3 365 253 3 317 221 1.5 278 195 1.5 244 172 1.5 215 153 1.5 191 137 1.5 170 123 1.5 151 110 1.5 135 100 1.5 109 82 1.5 16 1/2 6381 6381 9 4876 4876 7.5 3944 3944 7.5 3121 3121 6 2525 2525 6 2084 2084 6 1749 1749 4.5 1488 1488 4.5 1281 1273 4.5 1114 1035 4.5 977 853 4.5 864 711 3 769 599 3 688 509 3 620 437 3 550 377 3 477 328 3 415 287 3 363 253 3 320 224 3 283 199 1.5 251 178 1.5 223 159 1.5 199 143 1.5 178 129 1.5 144 107 1.5 17 7/8 7439 7439 10.5 5585 5585 9 4469 4469 7.5 3665 3665 7.5 2965 2965 7.5 2448 2448 6 2054 2054 6 1748 1748 6 1505 1505 4.5 1308 1308 4.5 1148 1085 4.5 1015 904 4.5 903 762 4.5 809 648 4.5 729 555 3 659 480 3 597 417 3 531 365 3 465 321 3 410 284 3 362 253 3 322 226 3 287 202 3 256 182 1.5 230 165 1.5 186 136 1.5 11 4913 4913 4.5 3605 3605 4.5 2757 2757 3 2175 2175 3 1758 1627 3 1450 1222 3 1216 941 3 1034 740 3 873 593 3 707 482 1.5 579 397 1.5 480 331 1.5 402 279 1.5 339 237 1.5 289 203 1.5 247 176 1.5 213 153 1.5 184 134 1.5 160 118 1.5 140 104 1.5 122 93 1.5 108 83 1.5 95 74 1.5 84 67 1.5 74 60 1.5 58 50 1.5 12 3/8 6204 6204 6 4565 4565 4.5 3491 3491 4.5 2754 2754 4.5 2228 2228 3 1838 1740 3 1541 1340 3 1311 1054 3 1128 844 3 980 686 3 830 565 3 689 471 1.5 577 397 1.5 488 338 1.5 416 290 1.5 357 250 1.5 308 218 1.5 267 190 1.5 233 168 1.5 204 148 1.5 179 132 1.5 158 118 1.5 140 106 1.5 124 95 1.5 110 86 1.5 88 71 1.5 13 3/4 7321 7321 6 5639 5639 6 4312 4312 4.5 3403 3403 4.5 2752 2752 4.5 2271 2271 4.5 1905 1839 3 1620 1446 3 1394 1158 3 1212 941 3 1063 776 3 939 647 3 797 545 3 674 463 3 575 397 1.5 494 343 1.5 427 298 1.5 371 261 1.5 324 230 1.5 285 203 1.5 251 181 1.5 222 161 1.5 197 145 1.5 175 130 1.5 156 118 1.5 125 97 1.5 15 1/8 8585 8585 7.5 6663 6663 7.5 5220 5220 6 4120 4120 6 3333 3333 4.5 2750 2750 4.5 2307 2307 4.5 1963 1925 4.5 1689 1541 3 1469 1253 3 1286 1032 3 1133 861 3 1005 725 3 898 617 3 770 529 3 662 457 3 573 397 3 499 348 1.5 436 306 1.5 383 271 1.5 338 241 1.5 300 215 1.5 266 193 1.5 238 173 1.5 212 157 1.5 171 129 1.5

5 1/2" Depth (in.)

16 1/2 10028 10028 9 7662 7662 7.5 6198 6198 7.5 4905 4905 6 3968 3968 6 3275 3275 6 2748 2748 4.5 2338 2338 4.5 2013 2001 4.5 1745 1627 4.5 1526 1340 4.5 1345 1118 3 1193 941 3 1066 800 3 957 686 3 863 593 3 749 516 3 652 451 3 571 397 3 502 351 3 444 312 1.5 394 279 1.5 351 250 1.5 313 225 1.5 280 203 1.5 227 168 1.5 17 7/8 11690 11690 10.5 8776 8776 9 7023 7023 7.5 5759 5759 7.5 4660 4660 7.5 3846 3846 6 3228 3228 6 2746 2746 6 2357 2357 4.5 2042 2042 4.5 1786 1704 4.5 1574 1421 4.5 1397 1197 4.5 1248 1018 3 1121 873 3 1011 754 3 917 656 3 834 574 3 731 505 3 644 447 3 569 397 3 505 355 3 450 318 3 403 286 1.5 361 259 1.5 293 213 1.5 19 1/4 13624 13624 12 10024 10024 10.5 7926 7926 9 6552 6552 9 5406 5406 7.5 4463 4463 7.5 3746 3746 6 3177 3177 6 2725 2725 6 2362 2362 4.5 2066 2066 4.5 1821 1775 4.5 1616 1495 4.5 1444 1271 4.5 1297 1090 4.5 1171 941 4.5 1062 819 3 967 717 3 883 631 3 808 558 3 715 496 3 636 443 3 567 397 3 508 357 3 456 323 3 370 266 1.5 20 5/8 15906 15906 15 11432 11432 12 8920 8920 10.5 7311 7311 9 6192 6192 9 5126 5126 7.5 4291 4291 7.5 3637 3637 7.5 3120 3120 6 2704 2704 6 2365 2365 6 2085 2085 4.5 1851 1839 4.5 1654 1563 4.5 1486 1340 4.5 1341 1158 4.5 1217 1007 4.5 1108 881 4.5 1013 776 4.5 929 686 3 855 610 3 786 545 3 702 488 3 629 440 3 565 397 3 460 327 3 22 18636 18636 16.5 13035 13035 13.5 10020 10020 12 8135 8135 10.5 6845 6845 10.5 5825 5825 9 4868 4868 9 4126 4126 7.5 3540 3540 7.5 3069 3069 6 2685 2685 6 2367 2367 6 2102 2102 6 1878 1878 4.5 1687 1627 4.5 1523 1405 4.5 1382 1222 4.5 1259 1070 4.5 1151 941 4.5 1056 833 4.5 972 740 4.5 897 661 4.5 830 593 3 768 534 3 690 482 3 563 397 3 23 3/8 21961 21961 21 14875 14875 15 11242 11242 13.5 9033 9033 12 7547 7547 10.5 6480 6480 10.5 5481 5481 9 4646 4646 9 3987 3987 7.5 3456 3456 7.5 3024 3024 7.5 2666 2666 6 2367 2367 6 2115 2115 6 1901 1901 6 1717 1686 6 1557 1466 4.5 1419 1283 4.5 1297 1129 4.5 1190 999 4.5 1096 888 4.5 1011 793 4.5 936 711 4.5 869 640 4.5 808 578 4.5 680 476 3

10

Anthony 24F Glulam

Allowable Roof Load Tables LDF=1.15

Key - for each clear span there are three numbers: Row 1: Maximum Total Load with LDF of 1.15, and deflection limited to L/180 Row 2: Maximum Live Load limited by deflection of L/240 Row 3: Required Bearing Length in trimmer thickness (e.g., 1.5 = 1 trimmer, 3.0 = 2 trimmers, etc.)

3-1/2" & 5-1/2" Widths - Standard Depths

These tables can be used to size simple span beams and headers that carry uniform loads. The PLF loads must be calculated and take into account all floor and roof framing loads coming onto the beam or header.

Allowable Loads for Anthony Glulam in Pounds per Linear Foot

Actual

Span 6' 7' 8' 9' 10' 11' 12' 13' 14' 15' 16' 17' 18' 19' 20' 21' 22' 23' 24' 25' 26' 27' 28' 29' 30' 32' 8 1/4 2021 2021 3 1483 1483 3 1134 1134 3 894 894 3 723 655 1.5 596 492 1.5 498 379 1.5 390 298 1.5 310 239 1.5 251 194 1.5 205 160 1.5 170 133 1.5 142 112 1.5 120 96 1.5 101 82 1.5 86 71 1.5 74 62 1.5 64 54 1.5 55 47 1.5 48 42 1.5 42 37 1.5 37 33 1.5 32 30 1.5 28 27 1.5 25 24 1.5 19 19 1.5 9 5/8 2753 2753 4.5 2020 2020 3 1545 1545 3 1218 1218 3 985 985 3 813 782 3 681 602 3 579 473 1.5 496 379 1.5 402 308 1.5 330 254 1.5 273 212 1.5 229 178 1.5 193 152 1.5 164 130 1.5 141 112 1.5 121 98 1.5 105 85 1.5 91 75 1.5 80 67 1.5 70 59 1.5 61 53 1.5 54 47 1.5 48 43 1.5 42 39 1.5 33 32 1.5 11 3597 3597 4.5 2640 2640 4.5 2019 2019 4.5 1593 1593 3 1288 1288 3 1063 1063 3 891 891 3 758 707 3 652 566 3 567 460 3 495 379 3 411 316 1.5 345 266 1.5 291 226 1.5 248 194 1.5 213 168 1.5 184 146 1.5 160 128 1.5 139 112 1.5 122 99 1.5 107 88 1.5 95 79 1.5 84 71 1.5 74 64 1.5 66 58 1.5 53 47 1.5

3 1/2" Depth (in.)

12 3/8 4542 4542 6 3343 3343 6 2557 2557 4.5 2018 2018 4.5 1632 1632 4.5 1347 1347 3 1130 1130 3 961 961 3 827 806 3 719 655 3 630 540 3 557 450 3 494 379 3 418 322 3 357 276 1.5 307 239 1.5 265 208 1.5 231 182 1.5 202 160 1.5 177 142 1.5 156 126 1.5 138 112 1.5 123 101 1.5 109 91 1.5 97 82 1.5 78 67 1.5 13 3/4 5360 5360 7.5 4128 4128 6 3158 3158 6 2492 2492 6 2016 2016 4.5 1664 1664 4.5 1396 1396 4.5 1188 1188 4.5 1022 1022 3 889 889 3 780 740 3 689 617 3 613 520 3 549 442 3 492 379 3 424 327 3 367 285 3 319 249 1.5 279 219 1.5 246 194 1.5 217 173 1.5 192 154 1.5 171 138 1.5 153 124 1.5 137 112 1.5 110 93 1.5 15 1/8 6285 6285 9 4879 4879 7.5 3822 3822 7.5 3017 3017 6 2441 2441 6 2015 2015 4.5 1691 1691 4.5 1439 1439 4.5 1238 1238 4.5 1077 1077 4.5 945 945 3 835 822 3 744 692 3 666 589 3 600 505 3 542 436 3 491 379 3 428 332 3 375 292 3 330 258 3 292 230 1.5 259 205 1.5 231 184 1.5 206 166 1.5 185 150 1.5 150 123 1.5 16 1/2 7341 7341 10.5 5610 5610 9 4538 4538 9 3592 3592 7.5 2907 2907 6 2399 2399 6 2014 2014 6 1713 1713 4.5 1475 1475 4.5 1283 1283 4.5 1126 1126 4.5 995 995 4.5 886 886 4.5 794 764 3 715 655 3 647 566 3 588 492 3 536 431 3 490 379 3 432 335 3 382 298 3 339 266 3 303 239 3 271 215 3 243 194 1.5 198 160 1.5 17 7/8 8557 8557 12 6425 6425 10.5 5142 5142 9 4217 4217 9 3413 3413 7.5 2817 2817 7.5 2365 2365 6 2012 2012 6 1733 1733 6 1507 1507 4.5 1323 1323 4.5 1170 1170 4.5 1042 1042 4.5 933 933 4.5 840 833 4.5 760 719 4.5 689 626 3 628 548 3 574 482 3 527 426 3 485 379 3 434 339 3 388 304 3 347 273 3 312 247 3 254 203 3 11 3597 3597 4.5 2640 2640 4.5 2019 2019 4.5 1593 1593 3 1288 1288 3 1063 1063 3 891 891 3 758 707 3 652 566 3 567 460 3 495 379 3 411 316 1.5 345 266 1.5 291 226 1.5 248 194 1.5 213 168 1.5 184 146 1.5 160 128 1.5 139 112 1.5 122 99 1.5 107 88 1.5 95 79 1.5 84 71 1.5 74 64 1.5 66 58 1.5 53 47 1.5 12 3/8 7138 7138 6 5253 5253 6 4017 4017 4.5 3170 3170 4.5 2565 2565 4.5 2116 2116 3 1775 1775 3 1510 1510 3 1299 1266 3 1130 1029 3 991 848 3 875 707 3 776 596 3 657 507 3 561 434 1.5 482 375 1.5 417 326 1.5 362 286 1.5 317 251 1.5 278 222 1.5 245 198 1.5 217 177 1.5 193 158 1.5 172 142 1.5 153 129 1.5 123 106 1.5 13 3/4 8422 8422 7.5 6487 6487 6 4962 4962 6 3916 3916 6 3168 3168 4.5 2615 2615 4.5 2194 2194 4.5 1866 1866 4.5 1606 1606 3 1397 1397 3 1225 1164 3 1083 970 3 961 817 3 858 695 3 770 596 3 666 515 3 576 448 3 502 392 1.5 439 345 1.5 386 305 1.5 341 271 1.5 302 242 1.5 269 217 1.5 240 195 1.5 215 177 1.5 173 145 1.5 15 1/8 9876 9876 9 7666 7666 7.5 6006 6006 7.5 4741 4741 6 3836 3836 6 3166 3166 4.5 2657 2657 4.5 2261 2261 4.5 1946 1946 4.5 1692 1692 4.5 1482 1482 3 1307 1291 3 1160 1088 3 1036 925 3 930 793 3 839 685 3 761 596 3 673 521 3 589 459 3 519 406 3 459 361 1.5 407 322 1.5 363 289 1.5 324 260 1.5 291 235 1.5 236 194 1.5

5 1/2" Depth (in.)

16 1/2 11536 11536 10.5 8816 8816 9 7132 7132 9 5644 5644 7.5 4567 4567 6 3770 3770 6 3164 3164 6 2693 2693 4.5 2318 2318 4.5 2011 2011 4.5 1759 1759 4.5 1550 1550 4.5 1376 1376 4.5 1229 1201 3 1104 1029 3 997 889 3 904 773 3 823 677 3 752 596 3 678 527 3 600 469 3 533 418 3 476 375 3 426 338 3 382 305 1.5 311 251 1.5 17 7/8 13447 13447 12 10096 10096 10.5 8080 8080 9 6627 6627 9 5363 5363 7.5 4427 4427 7.5 3716 3716 6 3162 3162 6 2714 2714 6 2353 2353 4.5 2058 2058 4.5 1814 1814 4.5 1611 1611 4.5 1439 1439 4.5 1293 1293 4.5 1167 1131 4.5 1058 983 3 964 861 3 881 757 3 808 670 3 744 596 3 683 532 3 609 477 3 546 429 3 490 388 3 399 320 3 19 1/4 15672 15672 13.5 11531 11531 12 9119 9119 10.5 7539 7539 9 6221 6221 9 5137 5137 7.5 4312 4312 7.5 3658 3658 7.5 3138 3138 6 2721 2721 6 2380 2380 6 2098 2098 4.5 1863 1863 4.5 1665 1665 4.5 1496 1496 4.5 1351 1351 4.5 1225 1225 4.5 1116 1075 4.5 1020 946 4.5 936 837 3 862 744 3 795 664 3 736 596 3 683 536 3 617 484 3 503 399 3 20 5/8 18296 18296 16.5 13152 13152 13.5 10263 10263 12 8412 8412 10.5 7126 7126 10.5 5899 5899 9 4939 4939 9 4187 4187 7.5 3592 3592 7.5 3114 3114 6 2725 2725 6 2403 2403 6 2134 2134 6 1907 1907 6 1713 1713 4.5 1547 1547 4.5 1404 1404 4.5 1279 1279 4.5 1169 1164 4.5 1073 1029 4.5 988 915 4.5 912 817 4.5 844 733 3 783 660 3 729 596 3 624 491 3 22 21436 21436 19.5 14995 14995 15 11527 11527 13.5 9360 9360 12 7877 7877 10.5 6704 6704 10.5 5603 5603 9 4750 4750 9 4076 4076 7.5 3534 3534 7.5 3092 3092 7.5 2727 2727 6 2422 2422 6 2164 2164 6 1945 1945 6 1757 1757 6 1594 1594 4.5 1452 1452 4.5 1328 1328 4.5 1219 1219 4.5 1122 1111 4.5 1036 992 4.5 959 889 4.5 891 800 4.5 829 723 4.5 722 596 3 23 3/8 25260 25260 24 17111 17111 18 12934 12934 15 10393 10393 13.5 8685 8685 12 7457 7457 12 6308 6308 10.5 5348 5348 10.5 4590 4590 9 3980 3980 9 3482 3482 7.5 3071 3071 7.5 2728 2728 7.5 2438 2438 6 2191 2191 6 1979 1979 6 1796 1796 6 1637 1637 6 1497 1497 4.5 1374 1374 4.5 1265 1265 4.5 1168 1168 4.5 1082 1067 4.5 1004 960 4.5 935 867 4.5 815 715 4.5

11

Anthony 24F Glulam

Allowable Roof Load Tables LDF=1.25

Key - for each clear span there are three numbers: Row 1: Maximum Total Load with LDF of 1.25, and deflection limited to L/180 Row 2: Maximum Live Load limited by deflection of L/240 Row 3: Required Bearing Length in trimmer thickness (e.g., 1.5 = 1 trimmer, 3.0 = 2 trimmers, etc.)

3-1/2" & 5-1/2" Widths - Standard Depths

These tables can be used to size simple span beams and headers that carry uniform loads. The PLF loads must be calculated and take into account all floor and roof framing loads coming onto the beam or header.

Allowable Loads for Anthony Glulam in Pounds per Linear Foot

Actual

Span 6' 7' 8' 9' 10' 11' 12' 13' 14' 15' 16' 17' 18' 19' 20' 21' 22' 23' 24' 25' 26' 27' 28' 29' 30' 32' 8 1/4 2198 2198 3 1613 1613 3 1233 1233 3 973 899 3 786 655 3 648 492 1.5 498 379 1.5 390 298 1.5 310 239 1.5 251 194 1.5 205 160 1.5 170 133 1.5 142 112 1.5 120 96 1.5 101 82 1.5 86 71 1.5 74 62 1.5 64 54 1.5 55 47 1.5 48 42 1.5 42 37 1.5 37 33 1.5 32 30 1.5 28 27 1.5 25 24 1.5 19 19 1.5 9 5/8 2993 2993 4.5 2197 2197 4.5 1680 1680 3 1325 1325 3 1072 1040 3 884 782 3 741 602 3 622 473 3 496 379 1.5 402 308 1.5 330 254 1.5 273 212 1.5 229 178 1.5 193 152 1.5 164 130 1.5 141 112 1.5 121 98 1.5 105 85 1.5 91 75 1.5 80 67 1.5 70 59 1.5 61 53 1.5 54 47 1.5 48 43 1.5 42 39 1.5 33 32 1.5 11 3911 3911 6 2871 2871 4.5 2195 2195 4.5 1732 1732 4.5 1401 1401 3 1156 1156 3 970 899 3 825 707 3 710 566 3 603 460 3 495 379 3 411 316 1.5 345 266 1.5 291 226 1.5 248 194 1.5 213 168 1.5 184 146 1.5 160 128 1.5 139 112 1.5 122 99 1.5 107 88 1.5 95 79 1.5 84 71 1.5 74 64 1.5 66 58 1.5 53 47 1.5

3 1/2" Depth (in.)

12 3/8 4938 4938 7.5 3634 3634 6 2780 2780 4.5 2194 2194 4.5 1775 1775 4.5 1465 1465 4.5 1229 1229 3 1045 1006 3 900 806 3 782 655 3 686 540 3 588 450 3 494 379 3 418 322 3 357 276 1.5 307 239 1.5 265 208 1.5 231 182 1.5 202 160 1.5 177 142 1.5 156 126 1.5 138 112 1.5 123 101 1.5 109 91 1.5 97 82 1.5 78 67 1.5 13 3/4 5827 5827 7.5 4488 4488 7.5 3433 3433 6 2710 2710 6 2193 2193 4.5 1810 1810 4.5 1519 1519 4.5 1292 1292 4.5 1112 1105 4.5 967 899 3 849 740 3 750 617 3 668 520 3 577 442 3 492 379 3 424 327 3 367 285 3 319 249 1.5 279 219 1.5 246 194 1.5 217 173 1.5 192 154 1.5 171 138 1.5 153 124 1.5 137 112 1.5 110 93 1.5 15 1/8 6833 6833 9 5304 5304 9 4156 4156 7.5 3281 3281 7.5 2655 2655 6 2191 2191 6 1839 1839 4.5 1565 1565 4.5 1347 1347 4.5 1172 1172 4.5 1028 986 4.5 909 822 4.5 809 692 3 725 589 3 653 505 3 567 436 3 491 379 3 428 332 3 375 292 3 330 258 3 292 230 1.5 259 205 1.5 231 184 1.5 206 166 1.5 185 150 1.5 150 123 1.5 16 1/2 7981 7981 10.5 6099 6099 10.5 4934 4934 9 3906 3906 7.5 3161 3161 7.5 2609 2609 6 2190 2190 6 1864 1864 6 1605 1605 4.5 1396 1396 4.5 1225 1225 4.5 1083 1067 4.5 965 899 4.5 864 764 4.5 778 655 4.5 705 566 3 641 492 3 559 431 3 490 379 3 432 335 3 382 298 3 339 266 3 303 239 3 271 215 3 243 194 1.5 198 160 1.5 17 7/8 9303 9303 13.5 6985 6985 12 5590 5590 10.5 4585 4585 9 3711 3711 9 3064 3064 7.5 2572 2572 7.5 2189 2189 6 1885 1885 6 1640 1640 6 1439 1439 6 1273 1273 4.5 1134 1134 4.5 1016 971 4.5 915 833 4.5 828 719 4.5 751 626 4.5 684 548 4.5 625 482 3 552 426 3 489 379 3 434 339 3 388 304 3 347 273 3 312 247 3 254 203 3 11 3911 3911 6 2871 2871 4.5 2195 2195 4.5 1732 1732 4.5 1401 1401 3 1156 1156 3 970 899 3 825 707 3 710 566 3 603 460 3 495 379 3 411 316 1.5 345 266 1.5 291 226 1.5 248 194 1.5 213 168 1.5 184 146 1.5 160 128 1.5 139 112 1.5 122 99 1.5 107 88 1.5 95 79 1.5 84 71 1.5 74 64 1.5 66 58 1.5 53 47 1.5 12 3/8 7760 7760 7.5 5711 5711 6 4368 4368 4.5 3448 3448 4.5 2789 2789 4.5 2302 2302 4.5 1931 1931 3 1643 1581 3 1414 1266 3 1229 1029 3 1078 848 3 924 707 3 776 596 3 657 507 3 561 434 1.5 482 375 1.5 417 326 1.5 362 286 1.5 317 251 1.5 278 222 1.5 245 198 1.5 217 177 1.5 193 158 1.5 172 142 1.5 153 129 1.5 123 106 1.5 13 3/4 9156 9156 7.5 7053 7053 7.5 5395 5395 6 4259 4259 6 3446 3446 4.5 2844 2844 4.5 2387 2387 4.5 2030 2030 4.5 1748 1737 4.5 1520 1412 3 1333 1164 3 1179 970 3 1047 817 3 906 695 3 774 596 3 666 515 3 576 448 3 502 392 1.5 439 345 1.5 386 305 1.5 341 271 1.5 302 242 1.5 269 217 1.5 240 195 1.5 215 177 1.5 173 145 1.5 15 1/8 10737 10737 9 8335 8335 9 6531 6531 7.5 5155 5155 7.5 4172 4172 6 3444 3444 6 2890 2890 4.5 2459 2459 4.5 2117 2117 4.5 1841 1841 4.5 1613 1549 4.5 1422 1291 4.5 1262 1088 3 1128 925 3 1013 793 3 891 685 3 772 596 3 673 521 3 589 459 3 519 406 3 459 361 1.5 407 322 1.5 363 289 1.5 324 260 1.5 291 235 1.5 236 194 1.5

5 1/2" Depth (in.)

16 1/2 12541 12541 10.5 9584 9584 10.5 7754 7754 9 6137 6137 7.5 4967 4967 7.5 4100 4100 6 3442 3442 6 2929 2929 6 2522 2522 4.5 2188 2188 4.5 1914 1914 4.5 1687 1676 4.5 1498 1412 4.5 1338 1201 4.5 1202 1029 3 1085 889 3 984 773 3 878 677 3 770 596 3 678 527 3 600 469 3 533 418 3 476 375 3 426 338 3 382 305 1.5 311 251 1.5 17 7/8 14619 14619 13.5 10976 10976 12 8785 8785 10.5 7205 7205 9 5831 5831 9 4815 4815 7.5 4041 4041 7.5 3440 3440 6 2953 2953 6 2560 2560 6 2239 2239 6 1974 1974 4.5 1753 1753 4.5 1566 1527 4.5 1407 1309 4.5 1271 1131 4.5 1153 983 4.5 1050 861 3 960 757 3 867 670 3 768 596 3 683 532 3 609 477 3 546 429 3 490 388 3 399 320 3 19 1/4 17038 17038 15 12537 12537 13.5 9914 9914 12 8198 8198 10.5 6765 6765 9 5586 5586 9 4689 4689 7.5 3978 3978 7.5 3414 3414 7.5 2960 2960 6 2589 2589 6 2283 2283 6 2028 2028 6 1812 1812 4.5 1628 1628 4.5 1471 1412 4.5 1334 1228 4.5 1215 1075 4.5 1112 946 4.5 1020 837 4.5 939 744 4.5 857 664 3 766 596 3 686 536 3 617 484 3 503 399 3 20 5/8 19890 19890 18 14298 14298 15 11158 11158 13.5 9146 9146 12 7748 7748 10.5 6415 6415 10.5 5371 5371 9 4553 4553 9 3907 3907 7.5 3388 3388 7.5 2964 2964 7.5 2614 2614 6 2322 2322 6 2075 2075 6 1865 1865 6 1684 1684 4.5 1528 1511 4.5 1393 1322 4.5 1274 1164 4.5 1169 1029 4.5 1076 915 4.5 994 817 4.5 920 733 4.5 849 660 4.5 764 596 3 624 491 3 22 23303 23303 22.5 16302 16302 16.5 12533 12533 15 10177 10177 13.5 8565 8565 12 7290 7290 12 6093 6093 10.5 5166 5166 9 4433 4433 9 3844 3844 7.5 3364 3364 7.5 2967 2967 7.5 2635 2635 6 2355 2355 6 2117 2117 6 1912 1912 6 1735 1735 6 1581 1581 6 1447 1412 4.5 1328 1249 4.5 1223 1111 4.5 1129 992 4.5 1046 889 4.5 971 800 4.5 904 723 4.5 762 596 4.5 23 3/8 27460 27460 27 18602 18602 19.5 14061 14061 16.5 11300 11300 15 9443 9443 13.5 8109 8109 12 6860 6860 12 5817 5817 10.5 4992 4992 10.5 4329 4329 9 3788 3788 9 3341 3341 7.5 2968 2968 7.5 2653 2653 7.5 2385 2385 7.5 2154 2154 6 1955 1955 6 1782 1782 6 1630 1630 6 1497 1497 6 1378 1332 4.5 1273 1190 4.5 1179 1067 4.5 1095 960 4.5 1019 867 4.5 888 715 4.5

12

Anthony 24F Glulam

Allowable Floor Load Tables LDF=1.00

Key - for each clear span there are three numbers: Row 1: Maximum Total Load with LDF of 1.0, and deflection limited to L/240 Row 2: Maximum Live Load limited by deflection of L/360 Row 3: Required Bearing Length in trimmer thickness (e.g., 1.5 = 1 trimmer, 3.0 = 2 trimmers, etc.)

6-3/4" Widths - Standard Depths

These tables can be used to size simple span beams and headers that carry uniform loads. The PLF loads must be calculated and take into account all floor and roof framing loads coming onto the beam or header.

Allowable Loads for Anthony Glulam in Pounds per Linear Foot

Actual Span

6' 7' 8' 9' 10' 11' 12' 13' 14' 15' 16' 17' 18' 19' 20' 21' 22' 23' 24' 25' 26' 27' 28' 29' 30' 32'

8 1/4

3388 3388 3 2485 2456 3 1899 1645 3 1497 1155 1.5 1210 842 1.5 934 633 1.5 716 487 1.5 560 383 1.5 445 307 1.5 359 250 1.5 293 206 1.5 242 171 1.5 202 144 1.5 169 123 1.5 143 105 1.5 121 91 1.5 104 79 1.5 89 69 1.5 76 61 1.5 66 54 1.5 57 48 1.5 49 43 1.5 42 38 1.5 37 35 1.5 32 31 1.5 23 23 1.5

9 5/8

4614 4614 3 3386 3386 3 2588 2588 3 2041 1835 3 1650 1337 3 1361 1005 3 1140 774 1.5 896 609 1.5 714 487 1.5 577 396 1.5 472 327 1.5 391 272 1.5 326 229 1.5 275 195 1.5 233 167 1.5 199 144 1.5 171 126 1.5 147 110 1.5 128 97 1.5 111 86 1.5 97 76 1.5 84 68 1.5 74 61 1.5 65 55 1.5 57 50 1.5 44 41 1.5

11

6030 6030 4.5 4425 4425 4.5 3383 3383 3 2669 2669 3 2158 1997 3 1780 1500 3 1492 1155 3 1269 909 3 1071 728 3 867 592 1.5 711 487 1.5 589 406 1.5 493 342 1.5 417 291 1.5 354 250 1.5 303 216 1.5 261 188 1.5 226 164 1.5 197 144 1.5 172 128 1.5 150 114 1.5 132 101 1.5 116 91 1.5 103 82 1.5 91 74 1.5 71 61 1.5

12 3/8

7615 7615 6 5603 5603 4.5 4284 4284 4.5 3381 3381 4.5 2734 2734 3 2256 2136 3 1892 1645 3 1608 1294 3 1384 1036 3 1203 842 3 1018 694 3 845 579 1.5 709 487 1.5 599 414 1.5 510 355 1.5 438 307 1.5 378 267 1.5 328 234 1.5 286 206 1.5 250 182 1.5 220 162 1.5 194 144 1.5 172 129 1.5 152 117 1.5 135 105 1.5 108 87 1.5

13 3/4

8985 8985 6 6920 6920 6 5292 5292 4.5 4176 4176 4.5 3378 3378 4.5 2787 2787 4.5 2338 2257 3 1989 1775 3 1711 1421 3 1482 1155 3 1295 952 3 1141 794 3 978 669 3 828 569 3 706 487 1.5 606 421 1.5 524 366 1.5 456 320 1.5 398 282 1.5 349 250 1.5 308 222 1.5 272 198 1.5 241 178 1.5 215 160 1.5 191 144 1.5 153 119 1.5

15 1/8

10536 10536 7.5 8178 8178 7.5 6406 6406 6 5056 5056 6 4090 4090 4.5 3375 3375 4.5 2832 2832 4.5 2406 2362 4.5 2063 1891 3 1787 1538 3 1562 1267 3 1376 1056 3 1221 890 3 1090 757 3 945 649 3 813 560 3 703 487 3 612 427 1.5 536 375 1.5 471 332 1.5 415 295 1.5 368 264 1.5 327 236 1.5 292 213 1.5 261 192 1.5 210 158 1.5

16 1/2

12307 12307 9 9404 9404 7.5 7607 7607 7.5 6020 6020 6 4870 4870 6 4020 4020 6 3367 3367 4.5 2853 2853 4.5 2447 2447 4.5 2120 1997 4.5 1854 1645 4.5 1633 1372 3 1449 1155 3 1294 982 3 1162 842 3 1049 728 3 919 633 3 801 554 3 701 487 3 617 431 3 545 383 1.5 483 342 1.5 430 307 1.5 384 276 1.5 344 250 1.5 278 206 1.5

6 3/4" Depth (in.) 17 7/8 19 1/4

14346 14346 10.5 10770 10770 9 8619 8619 7.5 7068 7068 7.5 5719 5719 7.5 4714 4714 6 3939 3939 6 3338 3338 4.5 2863 2863 4.5 2481 2481 4.5 2169 2092 4.5 1912 1744 4.5 1697 1469 4.5 1515 1249 3 1361 1071 3 1228 925 3 1114 805 3 1014 704 3 897 620 3 790 548 3 698 487 3 620 435 3 553 390 3 494 351 1.5 443 317 1.5 359 261 1.5 16721 16721 12 12302 12302 10.5 9727 9727 9 8041 8041 9 6633 6633 7.5 5449 5449 7.5 4553 4553 6 3859 3859 6 3310 3310 6 2869 2869 4.5 2509 2509 4.5 2212 2178 4.5 1963 1835 4.5 1754 1560 4.5 1575 1337 4.5 1422 1155 4.5 1289 1005 3 1174 879 3 1073 774 3 984 685 3 878 609 3 780 544 3 696 487 3 623 439 3 559 396 3 455 327 1.5

20 5/8

19521 19521 15 14031 14031 12 10947 10947 10.5 8972 8972 9 7591 7591 9 6237 6237 7.5 5212 5212 7.5 4417 4417 6 3789 3789 6 3285 3285 6 2873 2873 6 2533 2533 4.5 2249 2249 4.5 2009 1919 4.5 1804 1645 4.5 1629 1421 4.5 1477 1236 4.5 1346 1082 4.5 1230 952 3 1128 842 3 1038 749 3 958 669 3 862 600 3 772 540 3 693 487 3 565 402 3

22

22871 22871 16.5 15998 15998 13.5 12297 12297 12 9984 9984 10.5 8401 8401 10.5 7076 7076 9 5913 5913 7.5 5012 5012 7.5 4300 4300 7.5 3728 3728 6 3261 3261 6 2875 2875 6 2553 2553 6 2281 2281 4.5 2049 1997 4.5 1850 1725 4.5 1678 1500 4.5 1528 1313 4.5 1397 1155 4.5 1282 1022 4.5 1180 909 4.5 1089 811 3 1008 728 3 935 655 3 847 592 3 691 487 3

23 3/8

26952 26952 21 18256 18256 15 13797 13797 13.5 11086 11086 12 9263 9263 10.5 7953 7953 10.5 6658 6658 9 5644 5644 9 4842 4842 7.5 4198 4198 7.5 3672 3672 7.5 3238 3238 6 2875 2875 6 2569 2569 6 2309 2309 6 2085 2069 4.5 1891 1799 4.5 1723 1575 4.5 1575 1386 4.5 1445 1226 4.5 1330 1090 4.5 1228 973 4.5 1137 873 4.5 1055 786 4.5 981 710 3 834 585 3

24 3/4

30583 30583 24 20874 20874 18 15475 15475 15 12292 12292 13.5 10192 10192 12 8703 8703 10.5 7445 7445 10.5 6312 6312 9 5416 5416 9 4695 4695 7.5 4108 4108 7.5 3623 3623 7.5 3217 3217 6 2875 2875 6 2583 2583 6 2333 2333 6 2117 2117 6 1929 1869 6 1764 1645 4.5 1618 1455 4.5 1490 1294 4.5 1376 1155 4.5 1273 1036 4.5 1182 932 4.5 1100 842 4.5 958 694 4.5

26 1/8

34078 34078 27 23946 23946 21 17365 17365 16.5 13617 13617 15 11197 11197 13.5 9505 9505 12 8255 8255 12 7016 7016 10.5 6020 6020 9 5220 5220 9 4567 4567 9 4028 4028 7.5 3577 3577 7.5 3197 3197 7.5 2873 2873 6 2595 2595 6 2355 2355 6 2145 2145 6 1962 1935 6 1801 1712 6 1658 1522 4.5 1531 1359 4.5 1418 1218 4.5 1316 1097 4.5 1224 991 4.5 1067 816 4.5

27 1/2

37762 37762 31.5 27601 27601 24 19508 19508 19.5 15080 15080 16.5 12287 12287 15 10364 10364 13.5 8960 8960 12 7757 7757 12 6656 6656 10.5 5772 5772 10.5 5050 5050 9 4454 4454 9 3956 3956 7.5 3536 3536 7.5 3178 3178 7.5 2871 2871 7.5 2605 2605 6 2374 2374 6 2171 2171 6 1993 1993 6 1835 1775 6 1695 1585 6 1569 1421 4.5 1457 1279 4.5 1356 1155 4.5 1181 952 4.5

28 7/8

41635 41635 34.5 30491 30491 27 21960 21960 21 16703 16703 18 13473 13473 16.5 11287 11287 15 9709 9709 13.5 8517 8517 12 7323 7323 12 6350 6350 10.5 5557 5557 10.5 4901 4901 9 4353 4353 9 3891 3891 9 3498 3498 7.5 3160 3160 7.5 2867 2867 7.5 2613 2613 7.5 2390 2390 6 2194 2194 6 2021 2021 6 1866 1835 6 1728 1645 6 1605 1481 6 1493 1337 6 1302 1102 4.5

13

Anthony 24F Glulam

Allowable Roof Load Tables LDF=1.15

Key - for each clear span there are three numbers: Row 1: Maximum Total Load with LDF of 1.15, and deflection limited to L/180 Row 2: Maximum Live Load limited by deflection of L/240 Row 3: Required Bearing Length in trimmer thickness (e.g., 1.5 = 1 trimmer, 3.0 = 2 trimmers, etc.)

6-3/4" Widths - Standard Depths

These tables can be used to size simple span beams and headers that carry uniform loads. The PLF loads must be calculated and take into account all floor and roof framing loads coming onto the beam or header.

Allowable Loads for Anthony Glulam in Pounds per Linear Foot

Actual Span

6' 7' 8' 9' 10' 11' 12' 13' 14' 15' 16' 17' 18' 19' 20' 21' 22' 23' 24' 25' 26' 27' 28' 29' 30' 32'

8 1/4

3899 3899 3 2860 2860 3 2186 2186 3 1724 1724 3 1394 1263 1.5 1149 949 1.5 960 731 1.5 752 575 1.5 599 460 1.5 484 374 1.5 396 308 1.5 328 257 1.5 274 217 1.5 231 184 1.5 195 158 1.5 167 136 1.5 143 119 1.5 123 104 1.5 107 91 1.5 93 81 1.5 81 72 1.5 71 64 1.5 62 58 1.5 54 52 1.5 47 47 1.5 36 36 1.5

9 5/8

5309 5309 4.5 3896 3896 3 2979 2979 3 2350 2350 3 1900 1900 3 1567 1507 3 1314 1161 3 1117 913 1.5 957 731 1.5 775 594 1.5 635 490 1.5 527 408 1.5 441 344 1.5 372 292 1.5 317 251 1.5 271 217 1.5 234 188 1.5 202 165 1.5 176 145 1.5 154 128 1.5 135 114 1.5 118 102 1.5 104 91 1.5 92 82 1.5 81 74 1.5 64 61 1.5

11

6937 6937 4.5 5092 5092 4.5 3893 3893 4.5 3072 3072 3 2485 2485 3 2050 2050 3 1719 1719 3 1462 1363 3 1258 1091 3 1093 887 3 955 731 3 793 610 1.5 665 514 1.5 562 437 1.5 479 374 1.5 411 323 1.5 355 281 1.5 308 246 1.5 269 217 1.5 235 192 1.5 207 170 1.5 183 152 1.5 162 136 1.5 144 123 1.5 128 111 1.5 102 91 1.5

12 3/8

8760 8760 6 6447 6447 6 4931 4931 4.5 3891 3891 4.5 3147 3147 4.5 2597 2597 3 2179 2179 3 1853 1853 3 1595 1554 3 1386 1263 3 1214 1041 3 1069 868 3 948 731 3 806 622 3 688 533 1.5 591 460 1.5 511 400 1.5 445 350 1.5 389 308 1.5 341 273 1.5 301 243 1.5 266 217 1.5 236 194 1.5 210 175 1.5 188 158 1.5 151 130 1.5

13 3/4

10336 10336 7.5 7962 7962 6 6090 6090 6 4806 4806 6 3888 3888 4.5 3209 3209 4.5 2693 2693 4.5 2291 2291 4.5 1971 1971 3 1708 1708 3 1493 1428 3 1316 1191 3 1167 1003 3 1042 853 3 936 731 3 817 632 3 707 549 3 616 481 1.5 539 423 1.5 474 374 1.5 419 333 1.5 371 297 1.5 330 266 1.5 295 240 1.5 264 217 1.5 213 179 1.5

15 1/8

12121 12121 9 9409 9409 7.5 7371 7371 7.5 5819 5819 6 4708 4708 6 3886 3886 4.5 3261 3261 4.5 2771 2771 4.5 2376 2376 4.5 2059 2059 4.5 1801 1801 3 1587 1585 3 1408 1335 3 1258 1135 3 1129 973 3 1019 841 3 924 731 3 825 640 3 723 563 3 637 498 3 563 443 1.5 500 396 1.5 445 355 1.5 398 319 1.5 357 288 1.5 289 238 1.5

16 1/2

14157 14157 10.5 10819 10819 9 8753 8753 9 6927 6927 7.5 5605 5605 6 4627 4627 6 3877 3877 6 3285 3285 4.5 2818 2818 4.5 2443 2443 4.5 2136 2136 4.5 1883 1883 4.5 1671 1671 4.5 1493 1474 3 1341 1263 3 1210 1091 3 1098 949 3 999 831 3 913 731 3 832 647 3 737 575 3 655 514 3 584 460 3 522 414 3 469 374 1.5 381 308 1.5

6 3/4" Depth (in.) 17 7/8 19 1/4

16503 16503 12 12391 12391 10.5 9916 9916 9 8133 8133 9 6581 6581 7.5 5426 5426 7.5 4534 4534 6 3843 3843 6 3297 3297 6 2858 2858 4.5 2499 2499 4.5 2204 2204 4.5 1956 1956 4.5 1748 1748 4.5 1570 1570 4.5 1417 1388 4.5 1285 1207 3 1171 1056 3 1070 930 3 982 822 3 903 731 3 834 653 3 748 585 3 670 527 3 602 476 3 490 392 3 19234 19234 13.5 14152 14152 12 11191 11191 10.5 9253 9253 9 7633 7633 9 6272 6272 7.5 5242 5242 7.5 4443 4443 6 3812 3812 6 3305 3305 6 2891 2891 6 2549 2549 4.5 2263 2263 4.5 2022 2022 4.5 1817 1817 4.5 1640 1640 4.5 1488 1488 4.5 1355 1319 4.5 1239 1161 4.5 1137 1027 3 1046 913 3 966 815 3 894 731 3 829 658 3 757 594 3 618 490 3

20 5/8

22455 22455 16.5 16141 16141 13.5 12595 12595 12 10324 10324 10.5 8735 8735 10.5 7178 7178 9 5999 5999 9 5086 5086 7.5 4363 4363 7.5 3783 3783 6 3309 3309 6 2918 2918 6 2591 2591 6 2316 2316 4.5 2081 2081 4.5 1879 1879 4.5 1705 1705 4.5 1553 1553 4.5 1420 1420 4.5 1303 1263 4.5 1199 1123 4.5 1107 1003 4.5 1025 899 3 951 809 3 885 731 3 766 602 3

22

26308 26308 19.5 18403 18403 15 14147 14147 13.5 11487 11487 12 9667 9667 10.5 8143 8143 10.5 6806 6806 9 5770 5770 9 4951 4951 7.5 4293 4293 7.5 3756 3756 7.5 3312 3312 6 2942 2942 6 2629 2629 6 2362 2362 6 2134 2134 6 1936 1936 4.5 1764 1764 4.5 1613 1613 4.5 1480 1480 4.5 1363 1363 4.5 1258 1217 4.5 1165 1091 4.5 1081 982 4.5 1006 887 4.5 876 731 3

23 3/8

31001 31001 24 21000 21000 18 15873 15873 15 12755 12755 13.5 10658 10658 12 9152 9152 12 7663 7663 10.5 6497 6497 9 5575 5575 9 4834 4834 9 4230 4230 7.5 3730 3730 7.5 3313 3313 7.5 2961 2961 6 2661 2661 6 2404 2404 6 2181 2181 6 1988 1988 6 1818 1818 4.5 1669 1669 4.5 1536 1536 4.5 1419 1419 4.5 1314 1309 4.5 1220 1178 4.5 1135 1064 4.5 989 877 4.5

24 3/4

35177 35177 28.5 24012 24012 21 17803 17803 16.5 14142 14142 15 11727 11727 13.5 10015 10015 12 8569 8569 12 7265 7265 10.5 6235 6235 10.5 5407 5407 9 4731 4731 9 4173 4173 7.5 3706 3706 7.5 3313 3313 7.5 2978 2978 7.5 2690 2690 6 2441 2441 6 2225 2225 6 2035 2035 6 1868 1868 6 1720 1720 6 1589 1589 4.5 1471 1471 4.5 1366 1366 4.5 1271 1263 4.5 1108 1041 4.5

26 1/8

39197 39197 31.5 27545 27545 24 19977 19977 19.5 15667 15667 16.5 12883 12883 15 10938 10938 13.5 9501 9501 13.5 8076 8076 12 6931 6931 10.5 6010 6010 10.5 5260 5260 9 4639 4639 9 4121 4121 9 3684 3684 7.5 3311 3311 7.5 2992 2992 7.5 2715 2715 7.5 2474 2474 6 2264 2264 6 2078 2078 6 1914 1914 6 1768 1768 6 1637 1637 6 1520 1520 4.5 1415 1415 4.5 1234 1224 4.5

27 1/2

43434 43434 36 31749 31749 28.5 22442 22442 22.5 17349 17349 18 14137 14137 16.5 11926 11926 15 10311 10311 13.5 8928 8928 13.5 7662 7662 12 6645 6645 12 5815 5815 10.5 5130 5130 10.5 4557 4557 9 4074 4074 9 3662 3662 9 3309 3309 7.5 3003 3003 7.5 2737 2737 7.5 2504 2504 7.5 2299 2299 6 2118 2118 6 1956 1956 6 1812 1812 6 1683 1683 6 1567 1567 6 1366 1366 4.5

28 7/8

47889 47889 42 35073 35073 33 25262 25262 25.5 19217 19217 21 15502 15502 18 12988 12988 16.5 11174 11174 15 9803 9803 15 8430 8430 13.5 7311 7311 12 6398 6398 12 5644 5644 10.5 5014 5014 10.5 4483 4483 9 4030 4030 9 3641 3641 9 3305 3305 7.5 3013 3013 7.5 2757 2757 7.5 2531 2531 7.5 2332 2332 7.5 2154 2154 6 1996 1996 6 1853 1853 6 1725 1725 6 1505 1505 6

14

Anthony 24F Glulam

Allowable Roof Load Tables LDF=1.25

Key - for each clear span there are three numbers: Row 1: Maximum Total Load with LDF of 1.25, and deflection limited to L/180 Row 2: Maximum Live Load limited by deflection of L/240 Row 3: Required Bearing Length in trimmer thickness (e.g., 1.5 = 1 trimmer, 3.0 = 2 trimmers, etc.)

6-3/4" Widths - Standard Depths

These tables can be used to size simple span beams and headers that carry uniform loads. The PLF loads must be calculated and take into account all floor and roof framing loads coming onto the beam or header.

Allowable Loads for Anthony Glulam in Pounds per Linear Foot

Actual Span

6' 7' 8' 9' 10' 11' 12' 13' 14' 15' 16' 17' 18' 19' 20' 21' 22' 23' 24' 25' 26' 27' 28' 29' 30' 32'

8 1/4

4239 4239 3 3110 3110 3 2378 2378 3 1876 1733 3 1516 1263 3 1251 949 1.5 960 731 1.5 752 575 1.5 599 460 1.5 484 374 1.5 396 308 1.5 328 257 1.5 274 217 1.5 231 184 1.5 195 158 1.5 167 136 1.5 143 119 1.5 123 104 1.5 107 91 1.5 93 81 1.5 81 72 1.5 71 64 1.5 62 58 1.5 54 52 1.5 47 47 1.5 36 36 1.5

9 5/8

5772 5772 4.5 4236 4236 4.5 3239 3239 3 2556 2556 3 2067 2006 3 1705 1507 3 1430 1161 3 1200 913 3 957 731 1.5 775 594 1.5 635 490 1.5 527 408 1.5 441 344 1.5 372 292 1.5 317 251 1.5 271 217 1.5 234 188 1.5 202 165 1.5 176 145 1.5 154 128 1.5 135 114 1.5 118 102 1.5 104 91 1.5 92 82 1.5 81 74 1.5 64 61 1.5

11

7542 7542 6 5536 5536 4.5 4234 4234 4.5 3341 3341 4.5 2702 2702 3 2230 2230 3 1871 1733 3 1591 1363 3 1369 1091 3 1163 887 3 955 731 3 793 610 1.5 665 514 1.5 562 437 1.5 479 374 1.5 411 323 1.5 355 281 1.5 308 246 1.5 269 217 1.5 235 192 1.5 207 170 1.5 183 152 1.5 162 136 1.5 144 123 1.5 128 111 1.5 102 91 1.5

12 3/8

9524 9524 7.5 7009 7009 6 5361 5361 4.5 4231 4231 4.5 3423 3423 4.5 2825 2825 4.5 2370 2370 3 2016 1941 3 1735 1554 3 1509 1263 3 1321 1041 3 1135 868 3 952 731 3 806 622 3 688 533 1.5 591 460 1.5 511 400 1.5 445 350 1.5 389 308 1.5 341 273 1.5 301 243 1.5 266 217 1.5 236 194 1.5 210 175 1.5 188 158 1.5 151 130 1.5

13 3/4

11238 11238 7.5 8656 8656 7.5 6622 6622 6 5227 5227 6 4229 4229 4.5 3490 3490 4.5 2929 2929 4.5 2492 2492 4.5 2145 2132 4.5 1858 1733 3 1625 1428 3 1432 1191 3 1271 1003 3 1112 853 3 950 731 3 817 632 3 707 549 3 616 481 1.5 539 423 1.5 474 374 1.5 419 333 1.5 371 297 1.5 330 266 1.5 295 240 1.5 264 217 1.5 213 179 1.5

15 1/8

13177 13177 9 10229 10229 9 8015 8015 7.5 6327 6327 7.5 5120 5120 6 4226 4226 6 3547 3547 4.5 3014 3014 4.5 2585 2585 4.5 2241 2241 4.5 1960 1901 4.5 1727 1585 3 1533 1335 3 1369 1135 3 1230 973 3 1093 841 3 947 731 3 825 640 3 723 563 3 637 498 3 563 443 1.5 500 396 1.5 445 355 1.5 398 319 1.5 357 288 1.5 289 238 1.5

16 1/2

15391 15391 10.5 11762 11762 10.5 9516 9516 9 7532 7532 7.5 6095 6095 7.5 5032 5032 6 4216 4216 6 3574 3574 6 3066 3066 4.5 2658 2658 4.5 2324 2324 4.5 2049 2049 4.5 1819 1733 4.5 1625 1474 4.5 1460 1263 3 1318 1091 3 1196 949 3 1077 831 3 945 731 3 832 647 3 737 575 3 655 514 3 584 460 3 522 414 3 469 374 1.5 381 308 1.5

6 3/4" Depth (in.) 17 7/8 19 1/4

17941 17941 13.5 13471 13471 12 10781 10781 10.5 8843 8843 9 7156 7156 9 5901 5901 7.5 4931 4931 7.5 4180 4180 6 3586 3586 6 3109 3109 6 2720 2720 4.5 2398 2398 4.5 2129 2129 4.5 1902 1874 4.5 1709 1606 4.5 1543 1388 4.5 1400 1207 4.5 1275 1056 3 1166 930 3 1064 822 3 942 731 3 838 653 3 748 585 3 670 527 3 602 476 3 490 392 3 20910 20910 15 15386 15386 13.5 12168 12168 12 10061 10061 10.5 8300 8300 9 6821 6821 9 5701 5701 7.5 4833 4833 7.5 4146 4146 7.5 3595 3595 6 3145 3145 6 2773 2773 6 2463 2463 6 2201 2201 4.5 1978 1978 4.5 1786 1733 4.5 1620 1507 4.5 1476 1319 4.5 1350 1161 4.5 1239 1027 4.5 1140 913 3 1052 815 3 940 731 3 842 658 3 757 594 3 618 490 3

20 5/8

24410 24410 18 17548 17548 15 13693 13693 13.5 11225 11225 12 9498 9498 10.5 7805 7805 10.5 6524 6524 9 5531 5531 9 4746 4746 7.5 4115 4115 7.5 3601 3601 6 3175 3175 6 2820 2820 6 2520 2520 6 2265 2265 6 2046 2046 4.5 1856 1854 4.5 1691 1622 4.5 1547 1428 4.5 1420 1263 4.5 1307 1123 4.5 1207 1003 4.5 1118 899 4.5 1037 809 4.5 937 731 3 766 602 3

22

28599 28599 22.5 20007 20007 16.5 15381 15381 15 12489 12489 13.5 10511 10511 12 8855 8855 10.5 7402 7402 10.5 6275 6275 9 5385 5385 9 4670 4670 7.5 4086 4086 7.5 3604 3604 7.5 3201 3201 6 2861 2861 6 2571 2571 6 2323 2323 6 2108 2108 6 1921 1921 4.5 1757 1733 4.5 1613 1533 4.5 1485 1363 4.5 1371 1217 4.5 1270 1091 4.5 1179 982 4.5 1097 887 4.5 935 731 4.5

23 3/8

33701 33701 27 22830 22830 19.5 17257 17257 16.5 13868 13868 15 11589 11589 13.5 9952 9952 12 8333 8333 12 7065 7065 10.5 6064 6064 9 5258 5258 9 4601 4601 9 4059 4059 7.5 3605 3605 7.5 3222 3222 7.5 2896 2896 6 2617 2617 6 2375 2375 6 2164 2164 6 1980 1980 6 1817 1817 6 1674 1635 4.5 1546 1460 4.5 1432 1309 4.5 1329 1178 4.5 1237 1064 4.5 1079 877 4.5

24 3/4

38240 38240 31.5 26104 26104 22.5 19356 19356 19.5 15376 15376 16.5 12751 12751 15 10890 10890 13.5 9318 9318 13.5 7901 7901 12 6781 6781 10.5 5881 5881 10.5 5146 5146 9 4540 4540 9 4033 4033 9 3605 3605 7.5 3240 3240 7.5 2928 2928 7.5 2657 2657 6 2422 2422 6 2216 2216 6 2034 2034 6 1874 1874 6 1731 1731 6 1603 1554 6 1489 1399 4.5 1386 1263 4.5 1208 1041 4.5

26 1/8

42609 42609 36 29945 29945 27 21718 21718 21 17033 17033 18 14008 14008 16.5 11893 11893 15 10331 10331 13.5 8782 8782 13.5 7537 7537 12 6537 6537 10.5 5721 5721 10.5 5047 5047 9 4484 4484 9 4008 4008 9 3603 3603 7.5 3256 3256 7.5 2955 2955 7.5 2694 2694 7.5 2465 2465 7.5 2263 2263 6 2084 2084 6 1926 1926 6 1784 1784 6 1657 1645 6 1542 1486 6 1345 1224 4.5

27 1/2

47215 47215 40.5 34514 34514 31.5 24398 24398 24 18862 18862 21 15371 15371 18 12968 12968 16.5 11212 11212 15 9708 9708 15 8333 8333 13.5 7227 7227 12 6325 6325 12 5580 5580 10.5 4958 4958 10.5 4432 4432 9 3985 3985 9 3601 3601 9 3269 3269 7.5 2980 2980 7.5 2726 2726 7.5 2504 2504 7.5 2306 2306 7.5 2131 2131 6 1974 1974 6 1834 1834 6 1707 1707 6 1489 1428 6

28 7/8

52058 52058 46.5 38127 38127 36 27463 27463 28.5 20892 20892 22.5 16855 16855 19.5 14122 14122 18 12150 12150 16.5 10660 10660 16.5 9167 9167 15 7951 7951 13.5 6959 6959 12 6140 6140 12 5455 5455 10.5 4877 4877 10.5 4385 4385 10.5 3963 3963 9 3597 3597 9 3280 3280 9 3001 3001 7.5 2756 2756 7.5 2539 2539 7.5 2346 2346 7.5 2174 2174 7.5 2019 2019 6 1880 1880 6 1641 1641 6

15

Anthony 24F Glulam

Allowable Floor Load Tables LDF=1.00

Key - for each clear span there are three numbers: Row 1: Maximum Total Load with LDF of 1.0, and deflection limited to L/240 Row 2: Maximum Live Load limited by deflection of L/360 Row 3: Required Bearing Length in trimmer thickness (e.g., 1.5 = 1 trimmer, 3.0 = 2 trimmers, etc.)

8-3/4" Widths - Standard Depths

These tables can be used to size simple span beams and headers that carry uniform loads. The PLF loads must be calculated and take into account all floor and roof framing loads coming onto the beam or header.

Allowable Loads for Anthony Glulam in Pounds per Linear Foot

Actual Span

10' 11' 12' 13' 14' 15' 16' 17' 18' 19' 20' 21' 22' 23' 24' 25' 26' 27' 28' 29' 30' 32' 34' 36' 38' 40'

8 1/4

1569 1092 1.5 1211 820 1.5 928 632 1.5 726 497 1.5 577 398 1.5 466 324 1.5 380 267 1.5 314 222 1.5 261 187 1.5 219 159 1.5 185 136 1.5 157 118 1.5 134 103 1.5 115 90 1.5 99 79 1.5 85 70 1.5 74 62 1.5 64 55 1.5 55 50 1.5 48 45 1.5 41 40 1.5 30 30 1.5 22 22 1.5 16 16 1.5 10 10 1.5 6 6 1.5

9 5/8

2139 1734 3 1764 1303 3 1478 1003 1.5 1161 789 1.5 925 632 1.5 748 514 1.5 612 423 1.5 507 353 1.5 423 297 1.5 356 253 1.5 302 217 1.5 258 187 1.5 221 163 1.5 191 142 1.5 165 125 1.5 144 111 1.5 125 99 1.5 109 88 1.5 96 79 1.5 84 71 1.5 74 64 1.5 57 53 1.5 43 43 1.5 33 33 1.5 25 25 1.5 18 18 1.5

11

2797 2588 3 2307 1944 3 1935 1498 3 1645 1178 3 1389 943 3 1124 767 1.5 922 632 1.5 764 527 1.5 640 444 1.5 540 377 1.5 459 324 1.5 393 279 1.5 339 243 1.5 293 213 1.5 255 187 1.5 222 166 1.5 195 147 1.5 171 131 1.5 151 118 1.5 133 106 1.5 118 96 1.5 92 79 1.5 73 66 1.5 57 55 1.5 45 45 1.5 35 35 1.5

12 3/8

3544 3544 3 2924 2769 3 2451 2132 3 2076 1677 3 1779 1343 3 1541 1092 3 1320 900 3 1096 750 1.5 918 632 1.5 777 537 1.5 662 461 1.5 568 398 1.5 490 346 1.5 425 303 1.5 371 267 1.5 324 236 1.5 285 210 1.5 251 187 1.5 222 168 1.5 197 151 1.5 175 136 1.5 139 112 1.5 111 94 1.5 89 79 1.5 71 67 1.5 57 57 1.5

13 3/4

4379 4379 4.5 3609 3609 4.5 3014 2925 3 2553 2301 3 2188 1842 3 1896 1498 3 1657 1234 3 1459 1029 3 1268 867 3 1073 737 3 915 632 1.5 786 546 1.5 679 475 1.5 591 415 1.5 516 366 1.5 453 324 1.5 399 288 1.5 353 257 1.5 313 230 1.5 278 207 1.5 248 187 1.5 199 154 1.5 160 129 1.5 130 108 1.5 106 92 1.5 86 79 1.5

15 1/8

5296 5296 4.5 4349 4349 4.5 3633 3633 4.5 3078 3062 4.5 2639 2452 3 2286 1993 3 1998 1643 3 1761 1369 3 1562 1154 3 1394 981 3 1226 841 3 1054 726 3 912 632 3 794 553 1.5 694 487 1.5 610 431 1.5 538 383 1.5 477 342 1.5 424 306 1.5 378 276 1.5 338 249 1.5 272 205 1.5 221 171 1.5 180 144 1.5 148 123 1.5 122 105 1.5

16 1/2

6278 6278 6 5157 5157 6 4308 4308 4.5 3650 3650 4.5 3130 3130 4.5 2712 2588 4.5 2371 2132 3 2090 1778 3 1854 1498 3 1656 1273 3 1486 1092 3 1341 943 3 1191 820 3 1038 718 3 909 632 3 799 559 3 706 497 1.5 627 444 1.5 558 398 1.5 498 358 1.5 446 324 1.5 361 267 1.5 294 222 1.5 242 187 1.5 200 159 1.5 166 136 1.5

8 3/4" Depth (in.) 17 7/8 19 1/4

7342 7342 6 6031 6031 6 5039 5039 6 4270 4270 4.5 3662 3662 4.5 3174 3174 4.5 2775 2711 4.5 2446 2260 4.5 2171 1904 4.5 1939 1619 3 1741 1388 3 1571 1199 3 1424 1043 3 1297 913 3 1163 803 3 1024 711 3 905 632 3 804 564 3 716 506 3 641 455 1.5 575 411 1.5 466 339 1.5 381 283 1.5 315 238 1.5 261 202 1.5 218 174 1.5 8487 8487 7.5 6972 6972 7.5 5826 5826 6 4937 4937 6 4235 4235 6 3670 3670 4.5 3210 3210 4.5 2829 2823 4.5 2512 2378 4.5 2243 2022 4.5 2015 1734 4.5 1819 1498 3 1649 1303 3 1502 1140 3 1372 1003 3 1258 888 3 1138 789 3 1011 705 3 902 632 3 807 569 3 725 514 3 589 423 1.5 484 353 1.5 400 297 1.5 334 253 1.5 279 217 1.5

20 5/8

9712 9712 9 7980 7980 7.5 6668 6668 7.5 5652 5652 6 4848 4848 6 4202 4202 6 3675 3675 6 3240 3240 4.5 2877 2877 4.5 2570 2487 4.5 2308 2132 4.5 2084 1842 4.5 1890 1602 4.5 1721 1402 4.5 1573 1234 3 1443 1092 3 1328 971 3 1225 867 3 1117 777 3 1000 699 3 899 632 3 732 521 3 602 434 3 500 366 1.5 417 311 1.5 351 267 1.5

22

10890 10890 10.5 9053 9053 9 7566 7566 7.5 6413 6413 7.5 5502 5502 7.5 4769 4769 6 4172 4172 6 3678 3678 6 3266 3266 6 2918 2918 4.5 2621 2588 4.5 2367 2236 4.5 2147 1944 4.5 1955 1702 4.5 1787 1498 4.5 1640 1325 4.5 1509 1178 4.5 1393 1052 3 1289 943 3 1196 849 3 1098 767 3 896 632 3 738 527 3 614 444 3 514 377 3 433 324 1.5

23 3/8

12007 12007 10.5 10193 10193 10.5 8518 8518 9 7221 7221 9 6195 6195 7.5 5371 5371 7.5 4699 4699 6 4143 4143 6 3679 3679 6 3287 3287 6 2953 2953 6 2667 2667 4.5 2419 2332 4.5 2204 2041 4.5 2015 1796 4.5 1849 1589 4.5 1702 1413 4.5 1571 1262 4.5 1454 1131 4.5 1349 1018 4.5 1255 920 3 1081 758 3 892 632 3 743 532 3 623 453 3 527 388 3

24 3/4

13212 13212 12 11281 11281 10.5 9526 9526 10.5 8076 8076 9 6929 6929 9 6008 6008 7.5 5256 5256 7.5 4635 4635 7.5 4116 4116 6 3678 3678 6 3305 3305 6 2985 2985 6 2708 2708 6 2467 2423 4.5 2256 2132 4.5 2070 1887 4.5 1906 1677 4.5 1759 1498 4.5 1629 1343 4.5 1512 1209 4.5 1406 1092 4.5 1225 900 4.5 1066 750 3 889 632 3 747 537 3 632 461 3

26 1/8

14514 14514 13.5 12321 12321 12 10589 10589 10.5 8977 8977 10.5 7703 7703 9 6679 6679 9 5843 5843 7.5 5153 5153 7.5 4577 4577 7.5 4090 4090 7.5 3676 3676 6 3320 3320 6 3012 3012 6 2744 2744 6 2510 2508 6 2304 2219 6 2121 1973 4.5 1958 1761 4.5 1813 1579 4.5 1683 1422 4.5 1566 1284 4.5 1364 1058 4.5 1197 882 4.5 1053 743 3 886 632 3 751 542 3

27 1/2

15927 15927 15 13435 13435 13.5 11615 11615 12 9924 9924 12 8516 8516 10.5 7385 7385 9 6461 6461 9 5699 5699 9 5061 5061 7.5 4523 4523 7.5 4065 4065 7.5 3672 3672 7.5 3332 3332 6 3036 3036 6 2777 2777 6 2549 2549 6 2347 2301 6 2168 2054 6 2007 1842 4.5 1863 1658 4.5 1734 1498 4.5 1511 1234 4.5 1327 1029 4.5 1173 867 4.5 1040 737 4.5 883 632 3

28 7/8

17465 17465 16.5 14632 14632 15 12586 12586 13.5 10918 10918 12 9370 9370 12 8125 8125 10.5 7110 7110 10.5 6271 6271 9 5570 5570 9 4978 4978 9 4475 4475 7.5 4042 4042 7.5 3668 3668 7.5 3343 3343 7.5 3058 3058 6 2807 2807 6 2585 2585 6 2387 2378 6 2211 2132 6 2053 1919 6 1910 1734 4.5 1665 1429 4.5 1462 1191 4.5 1293 1003 4.5 1150 853 4.5 1029 731 4.5

16

Anthony 24F Glulam

Allowable Roof Load Tables LDF=1.15

Key - for each clear span there are three numbers: Row 1: Maximum Total Load with LDF of 1.15, and deflection limited to L/180 Row 2: Maximum Live Load limited by deflection of L/240 Row 3: Required Bearing Length in trimmer thickness (e.g., 1.5 = 1 trimmer, 3.0 = 2 trimmers, etc.)

8-3/4" Widths - Standard Depths

These tables can be used to size simple span beams and headers that carry uniform loads. The PLF loads must be calculated and take into account all floor and roof framing loads coming onto the beam or header.

Allowable Loads for Anthony Glulam in Pounds per Linear Foot

Actual Span

10' 11' 12' 13' 14' 15' 16' 17' 18' 19' 20' 21' 22' 23' 24' 25' 26' 27' 28' 29' 30' 32' 34' 36' 38' 40'

8 1/4

1807 1638 1.5 1490 1230 1.5 1244 948 1.5 974 745 1.5 776 597 1.5 627 485 1.5 514 400 1.5 425 333 1.5 355 281 1.5 299 239 1.5 253 205 1.5 216 177 1.5 186 154 1.5 160 135 1.5 138 118 1.5 120 105 1.5 105 93 1.5 91 83 1.5 80 75 1.5 70 67 1.5 61 61 1.5 47 47 1.5 36 36 1.5 27 27 1.5 20 20 1.5 15 15 1.5

9 5/8

2463 2463 3 2032 1954 3 1703 1505 3 1448 1184 1.5 1241 948 1.5 1005 771 1.5 824 635 1.5 683 529 1.5 572 446 1.5 483 379 1.5 411 325 1.5 352 281 1.5 303 244 1.5 262 214 1.5 228 188 1.5 199 166 1.5 174 148 1.5 153 132 1.5 135 118 1.5 119 107 1.5 106 96 1.5 83 79 1.5 65 65 1.5 52 52 1.5 40 40 1.5 31 31 1.5

11

3221 3221 3 2657 2657 3 2229 2229 3 1895 1767 3 1627 1415 3 1409 1150 3 1231 948 3 1027 790 1.5 861 666 1.5 729 566 1.5 621 485 1.5 533 419 1.5 460 365 1.5 399 319 1.5 348 281 1.5 305 248 1.5 268 221 1.5 237 197 1.5 210 177 1.5 186 159 1.5 166 144 1.5 132 118 1.5 106 99 1.5 85 83 1.5 68 68 1.5 55 55 1.5

12 3/8

4080 4080 4.5 3367 3367 3 2823 2823 3 2392 2392 3 2051 2014 3 1776 1638 3 1552 1349 3 1368 1125 3 1213 948 3 1045 806 3 892 691 1.5 766 597 1.5 663 519 1.5 576 454 1.5 504 400 1.5 442 354 1.5 390 314 1.5 345 281 1.5 306 252 1.5 273 227 1.5 244 205 1.5 196 169 1.5 158 141 1.5 129 118 1.5 105 101 1.5 86 86 1.5

13 3/4

5041 5041 4.5 4155 4155 4.5 3471 3471 4.5 2941 2941 4.5 2522 2522 3 2185 2185 3 1910 1851 3 1683 1543 3 1493 1300 3 1333 1105 3 1197 948 3 1059 819 3 917 712 3 798 623 1.5 699 548 1.5 614 485 1.5 543 431 1.5 481 385 1.5 428 345 1.5 382 311 1.5 342 281 1.5 276 231 1.5 225 193 1.5 184 163 1.5 152 138 1.5 125 118 1.5

15 1/8

6095 6095 6 5007 5007 4.5 4183 4183 4.5 3545 3545 4.5 3040 3040 4.5 2634 2634 4.5 2303 2303 3 2030 2030 3 1802 1730 3 1609 1471 3 1445 1261 3 1304 1090 3 1182 948 3 1070 829 3 938 730 3 825 646 3 730 574 1.5 648 513 1.5 577 460 1.5 516 414 1.5 463 374 1.5 375 308 1.5 307 257 1.5 253 216 1.5 209 184 1.5 174 158 1.5

16 1/2

7226 7226 6 5936 5936 6 4960 4960 6 4204 4204 4.5 3606 3606 4.5 3125 3125 4.5 2733 2733 4.5 2409 2409 4.5 2138 2138 4.5 1910 1910 3 1715 1638 3 1548 1415 3 1404 1230 3 1278 1077 3 1168 948 3 1071 839 3 955 745 3 848 666 3 757 597 3 677 537 3 608 485 1.5 494 400 1.5 405 333 1.5 335 281 1.5 279 239 1.5 234 205 1.5

8 3/4" Depth (in.) 17 7/8 19 1/4

8450 8450 7.5 6942 6942 7.5 5801 5801 6 4917 4917 6 4218 4218 6 3656 3656 4.5 3198 3198 4.5 2819 2819 4.5 2503 2503 4.5 2236 2236 4.5 2008 2008 4.5 1813 1799 3 1644 1564 3 1497 1369 3 1369 1205 3 1256 1066 3 1155 948 3 1066 846 3 969 759 3 868 683 3 780 617 3 635 508 3 523 424 1.5 434 357 1.5 362 304 1.5 305 260 1.5 9767 9767 9 8025 8025 7.5 6707 6707 7.5 5685 5685 6 4877 4877 6 4228 4228 6 3698 3698 6 3261 3261 4.5 2895 2895 4.5 2587 2587 4.5 2324 2324 4.5 2098 2098 4.5 1903 1903 4.5 1734 1710 4.5 1585 1505 3 1454 1332 3 1338 1184 3 1235 1057 3 1143 948 3 1061 853 3 982 771 3 801 635 3 660 529 3 549 446 3 460 379 1.5 388 325 1.5

20 5/8

11176 11176 10.5 9184 9184 9 7676 7676 7.5 6507 6507 7.5 5583 5583 7.5 4840 4840 6 4234 4234 6 3734 3734 6 3315 3315 6 2962 2962 4.5 2662 2662 4.5 2404 2404 4.5 2181 2181 4.5 1987 1987 4.5 1816 1816 4.5 1667 1638 4.5 1534 1456 4.5 1416 1300 3 1311 1166 3 1217 1049 3 1132 948 3 985 781 3 819 651 3 682 548 3 573 466 3 484 400 3

22

12531 12531 10.5 10419 10419 10.5 8708 8708 9 7383 7383 9 6335 6335 7.5 5492 5492 7.5 4805 4805 7.5 4238 4238 6 3763 3763 6 3363 3363 6 3022 3022 6 2730 2730 6 2477 2477 4.5 2256 2256 4.5 2063 2063 4.5 1894 1894 4.5 1743 1743 4.5 1610 1578 4.5 1490 1415 4.5 1383 1273 4.5 1287 1150 4.5 1121 948 3 984 790 3 835 666 3 703 566 3 595 485 3

23 3/8

13816 13816 12 11730 11730 12 9805 9805 10.5 8312 8312 9 7133 7133 9 6185 6185 7.5 5412 5412 7.5 4773 4773 7.5 4239 4239 7.5 3788 3788 6 3405 3405 6 3075 3075 6 2791 2791 6 2543 2543 6 2326 2326 4.5 2134 2134 4.5 1965 1965 4.5 1815 1815 4.5 1680 1680 4.5 1560 1527 4.5 1452 1380 4.5 1265 1137 4.5 1111 948 3 982 798 3 850 679 3 721 582 3

24 3/4

15202 15202 13.5 12982 12982 12 10964 10964 12 9296 9296 10.5 7977 7977 10.5 6917 6917 9 6053 6053 9 5339 5339 7.5 4742 4742 7.5 4238 4238 7.5 3809 3809 7.5 3441 3441 6 3123 3123 6 2846 2846 6 2603 2603 6 2389 2389 6 2200 2200 4.5 2032 2032 4.5 1882 1882 4.5 1747 1747 4.5 1626 1626 4.5 1417 1349 4.5 1245 1125 4.5 1101 948 4.5 979 806 3 863 691 3

26 1/8

16701 16701 15 14178 14178 13.5 12186 12186 13.5 10333 10333 12 8868 8868 10.5 7690 7690 10.5 6729 6729 9 5936 5936 9 5272 5272 9 4713 4713 7.5 4236 4236 7.5 3827 3827 7.5 3473 3473 7.5 3165 3165 6 2896 2896 6 2658 2658 6 2448 2448 6 2261 2261 6 2094 2094 6 1945 1945 4.5 1810 1810 4.5 1578 1578 4.5 1386 1323 4.5 1226 1115 4.5 1091 948 4.5 976 813 4.5

27 1/2

18326 18326 16.5 15460 15460 15 13367 13367 13.5 11423 11423 13.5 9804 9804 12 8502 8502 10.5 7440 7440 10.5 6563 6563 9 5830 5830 9 5212 5212 9 4685 4685 7.5 4233 4233 7.5 3842 3842 7.5 3502 3502 7.5 3204 3204 7.5 2941 2941 6 2709 2709 6 2502 2502 6 2318 2318 6 2153 2153 6 2004 2004 6 1747 1747 4.5 1535 1535 4.5 1358 1300 4.5 1209 1105 4.5 1082 948 4.5

28 7/8

20095 20095 18 16837 16837 16.5 14485 14485 15 12566 12566 15 10785 10785 13.5 9354 9354 12 8186 8186 12 7222 7222 10.5 6416 6416 10.5 5735 5735 9 5156 5156 9 4659 4659 9 4229 4229 7.5 3854 3854 7.5 3527 3527 7.5 3238 3238 7.5 2983 2983 7.5 2755 2755 6 2553 2553 6 2371 2371 6 2207 2207 6 1925 1925 6 1692 1692 4.5 1497 1497 4.5 1333 1280 4.5 1193 1097 4.5

17

Anthony 24F Glulam

Allowable Roof Load Tables LDF=1.25

Key - for each clear span there are three numbers: Row 1: Maximum Total Load with LDF of 1.25, and deflection limited to L/180 Row 2: Maximum Live Load limited by deflection of L/240 Row 3: Required Bearing Length in trimmer thickness (e.g., 1.5 = 1 trimmer, 3.0 = 2 trimmers, etc.)

8-3/4" Widths - Standard Depths

These tables can be used to size simple span beams and headers that carry uniform loads. The PLF loads must be calculated and take into account all floor and roof framing loads coming onto the beam or header.

Allowable Loads for Anthony Glulam in Pounds per Linear Foot

Actual Span

10' 11' 12' 13' 14' 15' 16' 17' 18' 19' 20' 21' 22' 23' 24' 25' 26' 27' 28' 29' 30' 32' 34' 36' 38' 40'

8 1/4

1966 1638 3 1621 1230 1.5 1244 948 1.5 974 745 1.5 776 597 1.5 627 485 1.5 514 400 1.5 425 333 1.5 355 281 1.5 299 239 1.5 253 205 1.5 216 177 1.5 186 154 1.5 160 135 1.5 138 118 1.5 120 105 1.5 105 93 1.5 91 83 1.5 80 75 1.5 70 67 1.5 61 61 1.5 47 47 1.5 36 36 1.5 27 27 1.5 20 20 1.5 15 15 1.5

9 5/8

2679 2601 3 2210 1954 3 1854 1505 3 1556 1184 3 1241 948 1.5 1005 771 1.5 824 635 1.5 683 529 1.5 572 446 1.5 483 379 1.5 411 325 1.5 352 281 1.5 303 244 1.5 262 214 1.5 228 188 1.5 199 166 1.5 174 148 1.5 153 132 1.5 135 118 1.5 119 107 1.5 106 96 1.5 83 79 1.5 65 65 1.5 52 52 1.5 40 40 1.5 31 31 1.5

11

3503 3503 3 2891 2891 3 2425 2247 3 2062 1767 3 1771 1415 3 1508 1150 3 1238 948 3 1027 790 1.5 861 666 1.5 729 566 1.5 621 485 1.5 533 419 1.5 460 365 1.5 399 319 1.5 348 281 1.5 305 248 1.5 268 221 1.5 237 197 1.5 210 177 1.5 186 159 1.5 166 144 1.5 132 118 1.5 106 99 1.5 85 83 1.5 68 68 1.5 55 55 1.5

12 3/8

4437 4437 4.5 3662 3662 4.5 3072 3072 3 2602 2516 3 2231 2014 3 1933 1638 3 1690 1349 3 1471 1125 3 1234 948 3 1045 806 3 892 691 1.5 766 597 1.5 663 519 1.5 576 454 1.5 504 400 1.5 442 354 1.5 390 314 1.5 345 281 1.5 306 252 1.5 273 227 1.5 244 205 1.5 196 169 1.5 158 141 1.5 129 118 1.5 105 101 1.5 86 86 1.5

13 3/4

5482 5482 4.5 4519 4519 4.5 3776 3776 4.5 3199 3199 4.5 2744 2744 4.5 2378 2247 3 2079 1851 3 1832 1543 3 1626 1300 3 1441 1105 3 1231 948 3 1059 819 3 917 712 3 798 623 1.5 699 548 1.5 614 485 1.5 543 431 1.5 481 385 1.5 428 345 1.5 382 311 1.5 342 281 1.5 276 231 1.5 225 193 1.5 184 163 1.5 152 138 1.5 125 118 1.5

15 1/8

6628 6628 6 5446 5446 6 4550 4550 4.5 3856 3856 4.5 3308 3308 4.5 2867 2867 4.5 2507 2464 4.5 2210 2054 3 1961 1730 3 1752 1471 3 1573 1261 3 1417 1090 3 1228 948 3 1070 829 3 938 730 3 825 646 3 730 574 1.5 648 513 1.5 577 460 1.5 516 414 1.5 463 374 1.5 375 308 1.5 307 257 1.5 253 216 1.5 209 184 1.5 174 158 1.5

16 1/2

7857 7857 7.5 6456 6456 6 5395 5395 6 4572 4572 6 3923 3923 4.5 3400 3400 4.5 2974 2974 4.5 2622 2622 4.5 2328 2247 4.5 2079 1910 4.5 1868 1638 3 1686 1415 3 1529 1230 3 1393 1077 3 1225 948 3 1079 839 3 955 745 3 848 666 3 757 597 3 677 537 3 608 485 1.5 494 400 1.5 405 333 1.5 335 281 1.5 279 239 1.5 234 205 1.5

8 3/4" Depth (in.) 17 7/8 19 1/4

9188 9188 9 7550 7550 7.5 6309 6309 7.5 5348 5348 6 4588 4588 6 3978 3978 6 3480 3480 4.5 3068 3068 4.5 2724 2724 4.5 2434 2429 4.5 2187 2082 4.5 1974 1799 4.5 1791 1564 4.5 1631 1369 3 1492 1205 3 1368 1066 3 1221 948 3 1086 846 3 969 759 3 868 683 3 780 617 3 635 508 3 523 424 1.5 434 357 1.5 362 304 1.5 305 260 1.5 10620 10620 9 8727 8727 9 7294 7294 7.5 6183 6183 7.5 5305 5305 6 4599 4599 6 4024 4024 6 3548 3548 6 3151 3151 4.5 2816 2816 4.5 2530 2530 4.5 2285 2247 4.5 2073 1954 4.5 1888 1710 4.5 1727 1505 4.5 1584 1332 4.5 1459 1184 3 1347 1057 3 1218 948 3 1092 853 3 982 771 3 801 635 3 660 529 3 549 446 3 460 379 1.5 388 325 1.5

20 5/8

12153 12153 10.5 9987 9987 10.5 8347 8347 9 7077 7077 7.5 6072 6072 7.5 5265 5265 7.5 4607 4607 6 4063 4063 6 3608 3608 6 3224 3224 6 2898 2898 6 2617 2617 4.5 2375 2375 4.5 2164 2103 4.5 1979 1851 4.5 1816 1638 4.5 1672 1456 4.5 1544 1300 4.5 1429 1166 4.5 1327 1049 3 1215 948 3 992 781 3 819 651 3 682 548 3 573 466 3 484 400 3

22

13625 13625 12 11330 11330 10.5 9470 9470 10.5 8029 8029 9 6890 6890 9 5975 5975 7.5 5228 5228 7.5 4611 4611 7.5 4095 4095 6 3660 3660 6 3289 3289 6 2971 2971 6 2696 2696 6 2457 2457 4.5 2247 2247 4.5 2063 1988 4.5 1899 1767 4.5 1754 1578 4.5 1624 1415 4.5 1508 1273 4.5 1403 1150 4.5 1212 948 4.5 1001 790 3 835 666 3 703 566 3 595 485 3

23 3/8

15023 15023 13.5 12755 12755 12 10662 10662 12 9040 9040 10.5 7758 7758 9 6728 6728 9 5887 5887 9 5193 5193 7.5 4612 4612 7.5 4123 4123 7.5 3706 3706 6 3348 3348 6 3038 3038 6 2769 2769 6 2533 2533 6 2325 2325 6 2141 2119 4.5 1977 1893 4.5 1831 1697 4.5 1700 1527 4.5 1583 1380 4.5 1380 1137 4.5 1208 948 4.5 1009 798 3 850 679 3 721 582 3

24 3/4

16529 16529 15 14116 14116 13.5 11922 11922 12 10109 10109 12 8676 8676 10.5 7524 7524 10.5 6584 6584 9 5808 5808 9 5159 5159 7.5 4612 4612 7.5 4146 4146 7.5 3746 3746 7.5 3400 3400 6 3098 3098 6 2835 2835 6 2602 2602 6 2397 2397 6 2214 2214 6 2051 2014 4.5 1904 1813 4.5 1772 1638 4.5 1546 1349 4.5 1358 1125 4.5 1201 948 4.5 1016 806 4.5 863 691 3

26 1/8

18158 18158 16.5 15417 15417 15 13251 13251 13.5 11236 11236 13.5 9644 9644 12 8364 8364 10.5 7320 7320 10.5 6457 6457 9 5736 5736 9 5128 5128 9 4610 4610 7.5 4165 4165 7.5 3781 3781 7.5 3446 3446 7.5 3153 3153 6 2895 2895 6 2666 2666 6 2463 2463 6 2282 2282 6 2119 2119 6 1973 1926 6 1721 1587 4.5 1512 1323 4.5 1338 1115 4.5 1191 948 4.5 1022 813 4.5

27 1/2

19925 19925 18 16810 16810 16.5 14535 14535 15 12422 12422 13.5 10662 10662 13.5 9247 9247 12 8093 8093 12 7140 7140 10.5 6343 6343 10.5 5671 5671 9 5098 5098 9 4607 4607 9 4182 4182 7.5 3812 3812 7.5 3488 3488 7.5 3203 3203 7.5 2950 2950 7.5 2726 2726 6 2525 2525 6 2345 2345 6 2184 2184 6 1905 1851 6 1675 1543 4.5 1482 1300 4.5 1320 1105 4.5 1182 948 4.5

28 7/8

21849 21849 19.5 18307 18307 18 15750 15750 16.5 13665 13665 15 11729 11729 15 10173 10173 13.5 8904 8904 12 7855 7855 12 6979 6979 10.5 6240 6240 10.5 5610 5610 9 5070 5070 9 4602 4602 9 4196 4196 9 3839 3839 7.5 3526 3526 7.5 3248 3248 7.5 3001 3001 7.5 2781 2781 7.5 2583 2583 6 2405 2405 6 2098 2098 6 1845 1787 6 1633 1505 6 1455 1280 4.5 1303 1097 4.5

18

Anthony 24F Glulam

Load Table Notations and Examples

Anthony Glulam Floor and Roof PLF Load Notes

1. Values shown are the maximum uniform loads in pounds per linear foot (PLF) that can be applied to the beam. Beam weight has been subtracted from the total allowable load. Load tables are based on dry use conditions. 2. LDF = Load Duration Factor per code requirements. 3. Bearing length shown is required at each end of header, and is based on an allowable bearing stress of 740 psi. The beam must be sitting directly on top of 1 or more trimmers. A longer bearing length may be required depending on the material that the beam is bearing on. For example, if the beam is sitting on a SPF top plate, a longer bearing length will be required due to the lower compression perpendicular-to-grain design value for SPF. 4. The bearing lengths show the number of trimmers needed (e.g., 1.5 = 1 trimmer, 3.0 = 2 trimmers, etc.). This is based on the maximum PLF loads. Shorter bearing lengths may be used with lighter loads. 5. Tables are based on simple span conditions using the actual span as the center-to-center of bearing. Tables do not apply for continuous or multiple span conditions. The clear opening for the actual span given can be found by subtracting the listed bearing length from the actual span. 6. The beam is assumed to be loaded on the top edge and supported at bearing points. The beams should be laterally braced. 7. For deflection limits of L/240 and L/480, multiply The Maximum Live Load figure (Row 2) by 1.5 and 0.75, respectively. For deflection factors of L/180 and L/360, multiply the Maximum Live Load figure (row 2) by 1.333 and 0.667, respectively. The result shall not exceed the total load.

Procedures for Using Simple Span Beam Tables

1. To size beams from the Floor and Roof PLF Tables it is required to have the following: a. Live load determined by the governing Building Code (BOCA, ICBO, SBCCI, etc.) b. The dead load. c. The beam span or clear opening. d. Span carried or tributary width. 2. These tables may be used to size a simple span uniformly distributed loaded beam, or to determine the maximum load capacity of a specific size Glulam beam. The allowable loads shown in PLF tables include the beam weight. A simple span condition exist when the beam is supported on each end without overhangs. A continuous or cantilever loading application may require a balanced layup and an engineering or design review.

Garage Door Header: Single Story Example Problem

Determine the header size for the conditions below: Roof Load Conditions: Live (LL) = 30 psf Dead (DL) = 10 psf Building Width (B) = 24' Overhang = 2' Header Actual Span (L) = 17' Formula: Total Load = (B/2+2') x (LL + DL) = total applied load in PLF Live Load = (B/2+2') x LL = total live load in PLF Example: Total Load = (24/2 + 2) x (30 + 10) = 560 PLF Live Load = (24/2 + 2) x 30 = 420 PLF

figure 1

header

To size: 1. Go to allowable roof load tables (dependent upon width). LDF = 1.15 and find the 17' actual span row. 2. Using the top row, find a total load greater than 560 PLF (3-1/8 x 13-3/4, 3-1/2 x 12-3/8) 3. Using the middle row, find a live load greater than 420 PLF but also a total load greater than 560 PLF. (3-1/8 x 13 3/4 or 3-1/2 x 12-3/8).

;;;;; ;;;;; ; ;;; ; ;;;;; ; ;;;

actual span 17'

24' 2'

supported framing 28'

Beam to select: 3-1/2 x 12-3/8 - 17' 3" or 18' (bearing required = 3")

Note: If attic loading is anticipated, additional floor loading must be considered. Example: Add Floor LL=25, DL=10 Revised Total Load = 980 PLF, Live Load = 720 PLF (5-1/8 x 15-1/8 or 3-1/2 x 17-7/8 Required)

19

Anthony 24F Glulam

Load Table Examples

Anthony Glulam Sizing Examples

Garage or Window Header: Two Story Example Problem

Determine the header size for the conditions below: Roof Load Conditions: Live (LL) = 30 psf Dead (DL) = 15 psf Total = 45 psf Floor Load Conditions: Live (LL) = 40 psf Dead (DL) = 10 psf Total = 50 psf Calculate Total Load: Roof Load = (28/2 + 2) x 45 = 720 PLF Floor Load = (14/2) x 50 = 350 PLF Wall Load = 8' x 10 psf = 80 PLF Total Load = 1150 PLF Calculate Live Load : Roof Load = (28/2 + 2) x 30 = 480 PLF Floor Load = (14/2) x 40 = 280 PLF Live Load = 760 PLF

;;;;;; ;;;; ; ;;;;;;;; ;;;;;; ;;;; ; ;;;;;;;;

28' 2' 12'

#4

14'

To Size: 1. Go to Floor Load Table using LDF = 1.00 and 12' actual span row. 2. Using top row, find total load equal to or greater than 1150 PLF. 3-1/8 x 15-1/8 or 3-1/2 x 13-3/4. 3. Using middle row, find live load equal to or greater than 760 PLF and a Total Load equal to or greater than 1200 PLF 3-1/8 x 15-1/8 or 3-1/2 x 13-3/4. Beam to Select: 3-1/2 x 13-3/4 (3" bearing required) or 3-1/8 x 15 1/8 (4-1/2" Bearing required)

Floor Girder Beam Example Problem

Floor Load Conditions: Live (LL) Dead (DL) Building Width (B) Calculate Total Load: Total Load = (24/2) x (40 + 12) = 624 plf Calculate Live Load: Live Load = (24/2) x 40 = 480 plf Beam to Select (Floor Load Table): 5-1/8 x 15-1/8 - 20'3" or 21' (Bearing Required 3") = 40 psf = 12 psf = 24'

24' building width

Simple Roof Rafter Example Problem

Determine the rafter size for the conditions below: Roof Load Conditions: Live (snow) = 25 psf Dead = 15 psf Rafter Spacing: 5' on center Rafter Span: 20' Slope: 4/12 Calculate Total Load: Total Load = 5(25 + 15) = 200 plf Live Load = 5(25) = 125 plf Beam to Select (Roof 1.15 Table): 3-1/8 or 3-1/2 x 11 (Bearing Required 1.5")

;;;;;; ;;; ;;;;;; ;;;

20' actual span 5' 20' 2'

Note: If roof is greater than 4/12 pitch, dead load must be figured on total horizontal length of rafter.

;;;;;;;; ;

20

Anthony 24F Glulam

Connection Details

Common types of connectors and connection details are shown. The design values for most fasteners used with the Glulam are the same as those for solid timber and LVL. It must be noted that connections designed for specific applications may vary based on design loads and local code requirements. More information on connections can be found in AITC 104, "Typical Construction Details," published by the American Institute of Timber Construction. Your local Glulam dealer can also provide connection detail literature and hardware.

Typical Hangers

Face Mount Hanger

Top Mount Hanger

Top Mount Hanger

Typical Connections

Top Mount Hanger Top Mount Hanger

Wood or steel column

Hanger Face Mount Hanger

Beam to Beam

Beam to Column

Floor Beam to Joist

Strap per code if top plate is not continuous over header

Tie strap

Trimmers

Header to Frame

Beam to Frame

Do not cut or drill Anthony Glulams without tech note support

21

Anthony 24F Glulam

Guidelines for Drilling Horizontal Holes

DO NOT DRILL IN CRITICAL ZONES

UNIFORMLY LOADED SINGLE SPAN BEAM GLUED LAMINATED TIMBER Notes: 1. The maximum size horizontal hole (through the width of the beam) shall not exceed 1-1/2 inch. 2. Edge and End Spacing: Any horizontal hole must be a minimum of 4 hole diameters from the top or bottom surface of the glued laminated timber member, and 8 hole diameters from the member ends. The distance is measured from the edge of the member to the centerline of the hole. 3. Spacing between holes: Field added open or access holes not shown on the contract drawings shall be a minimum of 8 hole diameters from any hole in the member. The distance is measured from the edge of the hole to the nearest edge of the existing hole. 4. Number of holes: Determine the number of field added holes allowed by allowing one hole per each 5 foot length of the member. (This rule does not apply to spacing of holes.) 5. Other holes: Holes not described here require review by a qualified timber designer. L = length of beam d = depth of beam

22

Anthony 24F Glulam

Vertical 1/2" Diameter Holes in Glulam Beams

While field-drilling vertical holes in Glulam beams should be avoided, there are situations where they may be required. This Technical Note provides guidance on the drilling of a single 1/2" vertical hole in simple span Glulam beams of various thicknesses. These recommendations are based on a "worst case" scenario that assumes the beam is placed at its maximum span and is fully loaded with uniformly distributed loads. Concentrated or other non-uniform loads have not been considered and for such loads or other situations the effect of drilling a vertical hole should be checked by a qualified design professional. Figure 1: Hole in Glulam Beam Background: In analyzing a beam for the effect of drilling a single verticle hole it is necessary to consider both shear and bending capacities. Since the shear design requirements are greatest at the ends of the beam, vertical holes generally cannot be Glulam Beam placed at these locations without analysis by a qualified design professional. In a similar manner, the center of the span is the area of maximum bending stress, and again, a design professional's analysis is required when holes are desired to be placed in these areas. Between the areas of high shear and high bending stress, small vertical holes can be placed. This Technical Note provides guidance on the 1/2" Hole location of these safe areas for drilling vertical holes 1/2 inch or less in diameter. Drilling the hole: These holes must be carefully drilled along the vertical axis of the beam. (see Figure 1.) If the beam is deep it is recommended to use a drill guide and a sharp bit to preclude the bit from wandering as it passes through the beam depth. In addition, the beam should be inspected at the possible hole location to insure that there are no knots, Knot-holes, finger joints or other allowable defects in the vicinity of the hole (within the width of the beam on either side of the hole).

Figure 2 is provided to illustrate the allowable location for these vertical, 1/2" diameter holes:

Simple Span Length = L

3 1/8" - 3 1/2" width .13 L .26 L .74 L .87 L

5 1/8" - 5 1/2" width .05 L .31 L .69 L .92 L

6 3/4" width .06 L .34 L .66 L .94 L

8 3/4" width .04 L .35 L .63 L .96 L

Ref.: APA - The Engineered Wood Association

23

Anthony 24F Glulam

Shear Design Equations for Notched and Tapered Beams

Compression side Compression side

d

d

f v = 3V 2bd (a) SQUARE END BEARING (b) SLOPED END BEARING

f v = 3V 2bd

3d Maximum 0.4d Max. d d/3 Min. de de

e

d

f v = 3V 2bde (c) SLOPED END CUT FOR ROOF DRAINAGE

fv =

3V d-de 2b de de

(d) COMPRESSION-SIDE NOTCH ­ WHERE e de

e 0.4d Max. d de d

de

fv = fv = (e) COMPRESSION-SIDE NOTCH ­ WHERE e 3V 2bde d

3V 2bde

d de 0.9d

UNDER NO CIRCUMSTANCES SHOULD de

(f) TENSION-SIDE NOTCH ­ NOT RECOMMENDED

fv = shear stress (psi), V = shear force at notch location (lb), b = width of beam (in.) d = depth of beam (in.), de = effective depth as shown (in.), e = length of notch as shown (in.)

24

Anthony 24F Glulam

Standard Radius or Curvature (feet)

Camber is the amount of bend or curvature which can be built into a Glulam to offset anticipated deflection or to compensate for dead load deflection. This is important for longer spans where other non-cambered engineered wood products may sag after loads are applied. A 1600-foot radius is most commonly referred to as standard camber. Anthony Forest's standard radius is 1600'; others indicated on this chart are available on request. Built-in camber will reduce ponding on flat roofs and eliminate unsightly appearance of deflection under load. Glulam is also offered non-cambered.

Camber Before Installation

Camber After Installation With Roof and Wall Loads Applied

Without camber, a beam or header may sag after loads are applied.

Find appropriate size selection table (e.g., Garage Door, Floor Girder, etc.)

Double check your work to ensure you are using a table that meets or exceeds your loading conditions.

Find Applied Load Conditions (e.g., Live 20 psf, Dead 15 psf) and stress increase (e.g., 1.0 for floor load, 1.15 for roof snow load, 1.25 for roof construction load).

Is Camber Needed? If the header or beam is greater than 20'-0", camber is necessary.

Find clear opening or column spacing that meets your conditions. If exact opening is not listed, use the next larger opening or column spacing.

Find Glulam size from Anthony Size Selection Tables or Anthony computer sizing software.

Determine span of rafters or trusses framing into header

We encourage you to compare cost with other products, such as LVL and PSL

Header Span (36')

Camber is the amount of bend or curvature which can be built into a Glulam beam to offset anticipated deflection or to compensate for dead load deflection. example: a 2000' Anthony Glulam beam at 12' allows 1/8" camber

LENGTH

10 1/8" 26 1/2" 42 1 3/8" 58 2 1/2" 12 1/8" 28 5/8" 44 1 1/2" 60 2 3/4" 14 1/8" 30 5/8" 46 1 5/8" 16 1/4" 32 3/4" 48 1 3/4" 18 1/4" 34 7/8" 50 1 7/8" 20 1/4" 36 1" 52 2" 22 3/8" 38 1 3/8" 54 2 1/4" 24 3/8" 40 1 1/4" 56 1 3/8"

2000' Radius

25

COLUMN

TM

TM

Anthony Power Column Features

· · · · Combination #50 (#1 Dense SYP) Architectural & Industrial Appearance Individually Wrapped 3 1/8", 3 1/2", 5 1/8", 5 1/2", & 6 3/4" Widths

Service and Support.........

· National distribution through stocking dealers · Comprehensive technical support literature · AFP Sizer Software for designing beams and Columns

26

Anthony Power Columns - Combination #50

Load Tables

Column Length Concentric 100% 4' 19925 6' 14716 8' 9287 10' 6142 12' 4325 14' 2590 Column Length Concentric 100% 4' 19474 6' 15935 8' 10741 10' 7223 12' 5115 14' 3796 Column Length Concentric 100% 6' 57684 8' 46657 10' 33833 12' 24562 14' 18415 16' 14257 11342 18' 9228 20' 7127 22' 6098 24' Column Length Concentric 100% 6' 63425 8' 53913 10' 40663 12' 29946 14' 22579 16' 17527 18' 13965 11373 20' 9435 22' 7418 24' Column Length Concentric 100% 8' 94495 10' 81256 64548 12' 50217 14' 39537 16' 31735 18' 25958 20' 21595 22' 18230 24'

3-1/8 x 4-1/8

100% 12651 9720 6845 4914 3656 2235 Eccentric 115% 13386 9921 6897 4934 3665 2240 125% 13783 10014 6922 4944 3670 2242 Concentric 100% 33699 21186 12693 8288 5808 3474

3-1/8 x 5-1/2

100% 21135 15169 10233 7159 5228 3173 Eccentric 115% 22156 15377 10291 7182 5239 3179 125% 22679 15475 10320 7194 5245 3182 Concentric 100% 42124 26482 15866 10360 7260 4342

3-1/8 x 6-7/8

100% 27095 19560 13119 9123 6633 4019 Eccentric 115% 28499 19851 13199 9154 6648 4026 125% 29227 19989 13239 9170 6656 4030 Concentric 100% 51921 34513 20970 13740 9643 5770

3-1/8 x 8-1/4

100% 33563 25324 17255 12065 8794 5331 Eccentric 115% 35518 25794 17381 12113 8816 5343 125% 36562 26017 17443 12138 8828 5349

3-1/2 x 3-1/2

100% 11698 9045 6510 4755 3592 2798 Eccentric 115% 12325 9235 6553 4770 3599 2802 125% 12662 9322 6574 4778 3602 2804 Concentric 100% 22951 18781 12659 8512 6029 4474

3-1/2 x 4-1/8

100% 14373 11576 8497 6242 4719 3672 Eccentric 115% 15249 11892 8576 6271 4733 3679 125% 15730 12040 8614 6286 4740 3683 Concentric 100% 39753 28233 17527 11545 8118 6004

3-1/2 x 5-1/2

100% 24311 18790 13236 9481 7028 5381 Eccentric 115% 25636 19149 13334 9519 7046 5391 125% 26344 19316 13382 9538 7056 5396 Concentric 100% 49629 35291 21909 14432 10148 7505

3-1/2 x 6-7/8

100% 31224 24472 17183 12224 9007 6863 Eccentric 115% 33064 24996 17324 12278 9032 6877 125% 34060 25242 17393 12306 9045 6884

5-1/8 x 5-1/2

100% 26099 20410 16036 12820 10440 8645 7265 7265 5690 1422 Eccentric 115% 33393 26556 20563 16102 12855 10460 8658 7274 5696 1424 125% 34044 26765 20634 16135 12873 10471 8665 7279 5699 1425 Concentric 100% 72105 58321 42292 30702 23019 17821 14177 11536 8909 7623

5-1/8 x 6-7/8

100% 42822 35887 28432 22397 17873 14498 11949 9992 7804 1951 Eccentric 115% 44895 36727 28732 22531 17944 14540 11976 10010 7817 1954 125% 45978 37118 28874 22597 17980 14562 11990 10019 7824 1956 Concentric 100% 88139 74000 55139 40473 30466 23631 18819 15323 11836 10128

5-1/8 x 8-1/4

100% 54057 47052 38198 30370 24304 19719 16236 13557 10581 2645 Eccentric 115% 57127 48556 38760 30616 24432 19793 16282 13588 10603 2651 125% 58786 49273 39025 30737 24496 19830 16306 13603 10614 2653 Concentric 100% 102829 86334 64392 47219 35543 27569 21955 17876 13809 11815

5-1/8 x 9-5/8

100% 64224 56385 45875 36405 29046 23493 19290 16069 12528 10720 Eccentric 115% 68068 58329 46606 36723 29209 23587 19348 16106 12555 10742 125% 70164 59262 46953 36879 29291 23634 19378 16126 12568 10754

5-1/2 x 5-1/2

100% 34785 28700 22750 18015 14480 11840 9837 8290 7075 3007 Eccentric 115% 36224 29275 22939 18093 14519 11862 9851 8300 7082 3010 125% 34044 26765 20634 16135 12873 10471 8665 7279 5699 1425 Concentric 100% 79281 67391 50828 37433 28224 21909 17456 14216 11794 9273

5-1/2 x 6-7/8

100% 46468 39791 32222 25741 20750 16967 14075 11834 10070 4280 Eccentric 115% 48822 40890 32622 25915 20841 17020 14109 11856 10086 4286 125% 50073 41408 32808 25999 20886 17047 14126 11868 10094 4290 Concentric 100% 96468 84535 65887 49201 37298 29026 19876 16618 14068 5979

5-1/2 x 8-1/4

100% 58592 52106 43467 35190 28506 23335 19346 16241 13795 5863 Eccentric 115% 62042 54059 44249 35528 28680 23435 19408 16282 13823 5875 125% 63932 55012 44615 35691 28766 23485 19440 16303 13838 5881 Concentric 100% 112547 98624 76868 57401 43514 33864 27017 22021 18279 14372

5-1/2 x 9-5/8

100% 69645 62593 52477 42466 34310 27996 23137 19369 16410 6974 Eccentric 115% 73974 65145 53518 42915 34538 28126 23218 19421 16445 6989 125% 76369 66403 54006 43132 34651 28192 23259 19448 16464 6997

6-3/4 x 6-7/8

100% 51460 43783 36292 29990 24986 21048 17928 15431 13407 Eccentric 115% 53338 44631 36636 30151 25074 21101 17963 15454 13424 125% 54283 45021 36794 30228 25116 21127 17980 15466 13432 Concentric 100% 115619 102227 83455 65821 52142 41981 34399 28648 24202

6-3/4 x 8-1/4

100% 67251 59569 50886 42782 35993 30492 26058 22466 19533 Eccentric 115% 70470 61349 51692 43171 36207 30623 26143 22525 19576 125% 72162 62196 52064 43355 36311 30688 26187 22555 19598 Concentric 100% 134889 119265 97364 76792 60832 48977 40132 33422 28235

6-3/4 x 9-5/8

100% 81145 72862 62754 52906 44496 37626 32071 27570 23899 Eccentric 115% 85440 75369 63929 53481 44814 37820 32197 27657 23961 125% 87730 76579 64476 53755 44969 37916 32261 27701 23992 Concentric 100% 154159 136303 111273 87762 69523 55974 45865 38197 32269

6-3/4 x 11

100% 94735 85772 74200 62595 52574 44362 37722 32349 27978 Eccentric 115% 100072 88988 75732 63347 52989 44612 37883 32459 28055 125% 102947 90554 76449 63706 53192 44737 37965 32516 28095

NOTES: 1. Table applies to solid, one piece column members used in dry service conditions. 2. For eccentric conditions, loads have been adjusted for the worst case eccentric loading of 0.167 of the column thickness or 0.167 of the column width. 3. Loads are based on axial loads in accordance with the 1997 National Design Specifications for Wood Construction. For side loads or other combined bending and axial load conditions, see the appropriate provisions of the '97 NDS. 4. Columns are unbraced except at the column ends and the effective column length is equal to the actual column length. 5. Column equation adjustments have been made for coefficient of variation (COV) of 0.15 for columns with 3 to 5 laminations, and 0.10 for columns with 6 to 8 laminations.

COMBINATION #50 ALLOWABLE DESIGN PROPERTIES (LDF=1.0) Modulus of Elasticity, E = 1.9 x 106 psi Flexural Stress, Fb = 2100 psi (Bending about X-X Axis) Fb = 2100 psi (Bending about Y-Y Axis. 3-1/2" & 4-1/8" depths) Fb = 2300 psi (Bending about Y-Y Axis. 5-1/2" & 11" depths) Compression Parallel to Grain, Fc = 1700 psi (3-1/2" & 4-1/8" depths) Fc = 2300 psi (5-1/2" & 11" depths)

27

Anthony 24F Glulam

Engineered Timbers

...offer versatility, economy, strength, and durability

Versatility

Anthony glued laminated timber has a proven track record of reliability for a variety of structural applications. Exposed beams offer a dramatic design element, yet provide an unusual sense of softness, natural charm, and inviting warmth. At the same time, engineered timber construction provides an exceptionally high level of safety, durability and cost efficiency. Kiln-dried Anthony Glulam offer a strong, workable long span performance capability unmatched by any other building material. The energy efficiency of engineered timber can provide additional savings to the property owner. The natural thermal and insulating qualities of laminated wood can be combined with thermally efficient insulation materials to keep heat loss at a minimum. High resilience allows Glulams to absorb shocks that could rupture alternative building materials like concrete or steel. Glulam is also ideal for use in areas subject to high winds or earthquake damage. Glulam also has excellent fire-resistive qualities. The performance of Glulam under fire conditions is markedly superior to most unprotected non-combustible materials.

Strong, Durable, Fire Safe, and Stable

Throughout history, wood has been a durable building material, assuming proper principles of design, construction, and maintenance are followed. The Anthony Glulam provides an even higher degree of proven quality manufacturing. Both the 2400F and 3000F Power Beam exhibit property characteristics superior to solid sawn wood. Extra precautions are taken to ensure all laminations are kiln-dried to a maximum 15% moisture content. The end product results in a beam member with an exceptional level of dimensional stability, virtually eliminating checking, twisting, warping, and shrinkage.

Readily Available

The Anthony Glulam is readily available through a network of stocking distributors throughout the country. Glulams are offered in specified lengths up to 60' in industrial, architectural, and premium grades. All beams are either bundled or individually wrapped with water-resistant paper. Beams are squared-end trimmed and manufactured with a standard 2000' radius camber or no-camber.

Cost Effective/Energy Efficient

Anthony Glulam is surprisingly economical as compared to the higher cost composites or steel. The Glulam has a high strength to weight ratio and is sized to fit all system-type framing applications. One piece construction reduces building time and cost, and the Glulam can be trimmed to fit on the job site.

Computer Software

Anthony Forest offers a Windows friendly sizing software for fast and accurate sizing of most beam applications.

Vaulted Ceiling

Ridge Beams

Stair Treaders and Stringers Basement Beams Garage Door Header

Window Header

28

Power Products Storage Protection and Handling Instructions

Glued laminated wood materials like Anthony Power Products are a specialized product manufactured to designed strength and appearance standards. As with other building products, however, wood can be affected by the care ­ or lack of care ­ used during storage. Proper handling is important to insure that glued laminated wood material retain both the structural and appearance standards intended by the designer and built into the product at the plant. Following these simple precautions will help you obtain the kind of installation of which we can both be proud. to the elements and/or pressure preservative treated Power Products. These changes (severe checking, splitting, cupping and warping) may occur if beams are not properly protected from exposure to the elements. Time of removal of factory wrapping is optional, but, it must be emphasized that factory applied wrapping provides additional protection from damage in handling and in-transit only. If beams are wet and still in the wrap, it must be removed. Increases in width and depth will occur if wrap stays on. If further utilization of the wrap is desired for protection after shipment, the members should be inspected and provided with additional protection as necessary. If it is impractical to replace wrapping, all of it should be removed. Do not leave members partially exposed due to potential sun bleaching. Do not allow moisture to accumulate inside wrapping. When you must store Power Products at the jobsite, use the same care as with other mill work. Place on blocks well off the ground, separate with stripping in a vertically aligned position so air circulates around all four sides of each member and cover top and all sides with moisture-resistant paper, tarps or black polyethylene.

Unloading

If damage or loss in transit exists, do not unload until the delivering carrier has made an inspection. The carrier will not accept a damage claim unless its own inspection report accompanies the claim. Describe damage or loss in writing and file your written claim with the carrier. At the same time notify our sales office. Material sold F.O.B. railcars or truck requires unloading by you. Use sufficient manpower and proper equipment. Tally quantities against material list. Do not drop or drag laminated materials. Use care in handling to prevent damage to finished surfaces; nylon or plastic slings are desireable.

Erection

On unbalanced and cambered beams, there is a top and bottom of a beam. The top is always the narrow face where protective paper is folded and stapled. The top face will also have "TOP" stamped on the beam. Always place top towards the ceiling. If wrappings are removed temporarily at connections, replace them securely. After members are erected, if wrapping is to be left on, it is recommended that the wrapping paper be slit on the bottom or soffit face in several places along the member length to prevent water from being entrapped in the paper.

Storage

The customer is responsible for protection of this material at all times after arrival. Dimensional changes occur in wood with changes in moisture content. Product Handling & Protection It is the responsibility of the buyer to request the shipper to tarp a truck. Schedule delivery and installation of glue laminated wood members to avoid extended yard or jobsite storage. Keep Power Products as dry as possible during delivery, storage, handling and erection. If yard storage is necessary, place members on blocking away from ponding water or store under shed. Proper yard and jobsite protection of Power Products is essential in maintaining dimensional stability. The Power Beam® at Ijoist compatible depths makes it ever more important to keep dry. All Power Products are manufactured with a moisture content that averages 12%. As a general rule, for every 4% increase or decrease in MC, the beam will increase or decrease in size by 1%. Anthony Forest Products Company cannot be held responsible for physical changes that may occur as the result of constant exposure

Error or Defect

In case of fabrication error or material defects, immediately notify nearest sales office. Anthony Forest reserves the right to investigate and correct alleged errors and defects. Please call the sales office to notify of any problems.

Finally

Following these suggestions will help assure a satisfactory product and will assist us in maintaining our high standard of quality and customer product acceptance. We appreciate the opportunity to furnish Anthony Power Products for your customers.

29

Power Products CERTIFICATE OF WARRANTY

Anthony 30F Power Beam®, Anthony 24 F Glulam, Power Header®, Power ColumnTM, Power Log® and Power Plank® are superior glued laminated products engineered for reliable, lower cost performance in industrial and residential uses. Anthony Power Products are manufactured under strict quality control procedures. We guarantee our family of Power Products to be free from defects in design, materials and workmanship. We guarantee prompt and courteous customer service. For a detailed copy of our limited lifetime warranty, call us at 1-800-221-BEAM. We guarantee to pay for all reasonable repair or replacement costs if you have problems due to a defect in our Power Products. Our family name is on all of our Power Products. We intend to live up to our reputation for quality and service. We appreciate your confidence and your business.

John Anthony, President

WOOD

Information

32 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

28477


You might also be interested in

BETA