Read 730504 pg3 text version

TROUBLESHOOTING GUIDE

PROBLEM

Does not flush Poor or sluggish flush

POSSIBLE CAUSE a. Water supply valve closed. b. Supply line blocked.

c. a.

b. c. d. a. Toilet leaks b. Toilet does not a. b. shut off

! WARNING:

CORRECTIVE ACTION a. Open valve and allow water to fill tank. b. Shut off water supply, disconnect supply line and inspect all gaskets and washers. Reassemble. Also, see Fluidmaster maintenance. (see Step 14) c. Shut off water supply. Remove cap and clean as per Step 14. Sand or debris lodged in water control. a. Check that waterline level is set to correct height in tank, also verify the flush valve Bowl water level too low. adjustments are set as per Step 10. b. Open supply valve fully. Be sure that proper supply tube size is used. Supply valve partly closed. Partially clogged trapway and/or drain pipe and/or vent. c. Remove obstruction. Consult a plumber if necessary. d. Normal supply pressure must be at least 20 psi. Supply pressure too low. a. Review Step 9 of installation procedure. Poor supply line connection. Please refer to the Installation b. Review Step 4 through 7 of installation procedure. Poor bowl to tank/floor connection. Instructions Flush valve seat and/or rubber seal worn or deformed. a. Shut off water supply. Replace flush valve or flush valve silicone seal. for detailed corrective actions. b. Shut off water supply. Remove cap and clean per Step 14. Sand or debris lodged in water control. TANK Use of in tank cleaning products voids warranty as they may damage PUSH parts and cause leakage that may lead to property damage. NUMBER BUTTON ARM

}

Repair parts are determined by toilet tank number which can be found marked inside tank. NOTE: "XXX" represents color or trim finish options. Specify when ordering.

TOP

PART NO. DESCRIPTION 735130-400-XXX0A TANK COVER WITH PUSH BUTTON 738565-426.0070A FLUIDMASTER 400A VALVE 738565-427.0070A FLUIDMASTER 400A VALVE 7301143-0070A TANK COUPLING KIT #258 7381002-400.0070A DUAL FLUSH VALVE 7381002-401.0070A DUAL FLUSH VALVE 7381003-XXX0A PUSH BUTTON ASSEMBLY - TOP MOUNT 034783-XXX0A BOLT CAP KIT 760127-XXX0A TOILET SEAT (ELONGATED RIM ONLY) 760130-XXX0A TOILET SEAT-SLOW CLOSE (ELONGATED RIM ONLY) 7381042-0070A FLUSH VALVE SILICONE SEAL 760134-0200A HINGE KIT FOR SLOW CLOSE SEAT For further assistance please call: In the USA (800) 442-1902 www.americanstandard-us.com, In Canada (800) 387-0369 www.americanstandard.ca

4035 4035 .216 .516

NIPPLE

CRITICAL LEVEL MARK ("C.L.") MUST BE 1" ABOVE OVERFLOW PIPE

FLOAT CUP

FLUSH VALVE PARTIAL FLUSH ADUSTMENT

REPAIR PARTS LIST

FILL VALVE

VALVE BODY ADJUSTABLE HEIGHT

WATER LEVEL ADJUSTMENT ROD SHANK WASHER

FULL FLUSH ADUSTMENT BAYONET RELEASE SILICONE SEAL VALVE SEAT

LOCK NUT CONE WASHER COUPLING NUT (HAND TIGHT ONLY)

THREADED SHANK PARTS FOR WATER CONNECTION (SEE STEP 9)

7301145-100 Rev D

Information

730504 pg3

1 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

253853


You might also be interested in

BETA
730529-champion-en.ai
800026-Veneto_II-EN.ai
7301555-concealed_trapway-cadet3-studio-en.ai
730504 pg3