Read 5863903.pdf text version

880-960 / 1710-2170 MHz

Tri-sector Dual Band Antenna, 4 connectors Independent tilt on each band 0°-10° / 0°-10° Independent azimuth panning ±15° on each sector Very small diameter (388 mm) for a low wind load MET and RET versions, AISG1.1 or 3GPP/AISG2.0

Presentation The 5863903 is a tri-sector system and contains three dual band antennas installed at 120° in a cylindrical shroud with ±15° azimuth panning capability independent on each sector. A service area at the bottom can be opened for the access to the connectors and to the manual adjustments of the electrical downtilts and the azimuth panning. Variants can be delivered with only one or two sector fitted in it. See table below. Model Reference Numbers

Three sectors MET RET AISG1.1 RET 3GPP/AISG2.0 Two sectors One sector

5863903

5863803 5863803G

3-sector XXpol / 65° Az 16.5 / 18 dBi

5863903 5863803 5863803G

5863902 5863802 5863802G

5863901 5863801 5863801G

Access Ports Description (Connectors) Each sector has 4 connectors located inside the service area and marked with colour rings. See photo next page

DT 5421 - Ed F - page 1/3 - We reserve the rights to modify our products without prior notice - Several patents pending regarding this product.

Low band: High band: Electrical Characteristics Frequency Band (MHz) Gain (dBi) tilt 0° tilt 5° tilt 10°

880-960 MHz ports 1710-2170 MHz ports (wide band)

RED rings BLUE rings

2 x 7-16 DIN female Long Neck 2 x 7-16 DIN female Long Neck 1900...2170 17.6...18.1 17.4...17.9 17.3...17.7 50 ohms <1.4 ±45°

Low Band (Red)

880...960 16.0...16.5 16.0...16.5 15.9...16.4 50 ohms <1.4 ±45° 65° 9° 0° to 10° >30 dB 45 dB typ. 18 dB typ. >30 dB 200 W <-110 dBm

High Band (Blue)

1710...1880 17.3...17.6 17.2...17.4 17.2...17.3

Input Impedance VSWR Polarisation Horizontal Beamwidth (-3 dB) Vertical Beamwidth (-3 dB) Electrical Downtilt range Isolation between ports Isolation between bands Upper Sidelobe Rejection (20° sector above main beam) Front to back ratio Maximum Power (per port) Intermodulation 3rd order for 2 x 20 W carriers Electrical Downtilt Control

65° 6° 0° to 10° >30 dB 45 dB typ. 18 dB typ. >30 dB 160 W <-110 dBm

64° 6°

Electrical downtilt can be controlled separately for Low Band and High Band. The two tilt indicators are covered by a removable transparent cap. Manual control: A coloured knob at the end of the tilt indicator allows change of the tilt without need for a tool. Knob colour is identical to connector colours as defined above. To access the knob, the cap is removed by turning it counter clockwise. It is re-installed by opposite rotation. Remote control: The remote control of the electrical tilt is managed by a module (MDCU) totally inserted at the bottom of the antenna. One single module controls the tilt of each band (no need of daisy chain cables between the bands). For RET control, the transparent cap must be in place and locked. This module does not add any additional length at the bottom of the antenna. The tilt angle indicator stays always visible and the antenna still has manual tilt control (manual override). RET module part number

(one only needed per sector)

MDCU-A0000 MDCU-G0000

for AISG1.1 protocol (3 units included in 5863803) for 3GPP/AISG2.0 protocol (3 units included in 5863803G)

w w w. a m p h e n o l - ja yb e a m . co m

880-960 / 1710-2170 MHz 5863903

5863803 5863803G

Environmental Operating Temperature Range Environmental RoHS compliant Mechanical Characteristics Dimensions (see drawing) Relative directions of internal antennas (sector axis) Weight Shroud Wind Speed Wind load at 160 km/h

Description

-40°C to +60ºC ETS 300 019 Yes Total height: 2291 mm (including 250 mm service area) Diameter: 388 mm Effective antenna height: 1900 mm 0° (+/-15°) 120° (+/-15°) 240° (+/-15°) 1 sector: 44 kg

3 sectors: 68 kg

2 sectors: 56 kg

Packaging Wooden box 2.48 x 0.53 x 0.6 m 0.789 m3 140 kg

Outdoor plastic, Grey RAL7035 Operational: 160 km/h 428 N

Part number

Survival: 200 km/h

Accessories (To be ordered separately) Lightning finial Supporting and extending accessories (platform and extension) TRX-LPK See next page

Antenna bottom

DT 5421 - Ed F - page 2/3 - We reserve the rights to modify our products without prior notice - Several patents pending regarding this product.

Dimensions

(view inside service area)

Mounting Flange Interface

Six curved slots 11.5 mm wide on a 260 mm dia. circle

w w w. a m p h e n o l - ja yb e a m . co m

880-960 / 1710-2170 MHz 5863903

5863803 5863803G TRIO extension

General Description A TRIO Extension is a short mounting (0.85 or 1.3 m) mast usable with Trio series antennas. It has the same diameter (388 mm), same outside material, and same colour as the antenna. The two major advantages of the extensions are getting the antenna higher, and housing our TMA2100. Dimensions Weights Shrouds Flanges Wind speed Height 0.85 or 1.3 m, stackable up to 2.15 m Diameter 388 mm From 41.5 to 60 kg Outdoor plastic, Grey RAL 7035 Galvanised steel Operational : 160 km/h Survival : 200 km/h Open TRIO Extension, withTMA

For more details please refer to our separate documentation on TRIO extensions.

TRIO antenna support

DT 5421 - Ed F - page 3/3 - We reserve the rights to modify our products without prior notice - Several patents pending regarding this product.

General Description The TRIO antenna support is a ready-to-use system that comes with a non-penetrating galvanized steel octagonal platform, ballast included, and a foldable mast section with different possible heights. The mast diameter is 355 mm. Two platform sizes are available for this antenna, depending on the antenna height, and whether a TRIO extension as described before is used or not. A TRIO Extension unit may be used to house 3 UMTS2100 dual MHAs. The lowest mast section is foldable from vertical to horizontal, with provision for optional manual hydraulic operation. A shorter simplified version, with a tiltable hinged support, allows for tilting, but without any possible hydraulic assistance. For more details please refer to our separate documentation on TRIO antenna supports. Solutions for 5863903 without TRIO extension

Top Height 3.64 m 4.64 m 5.64 m 6.64 m 7.64 m 2544 2544 3380 3380 3380 x x x x x Bedplate size 2544 mm octogonal 2544 mm octogonal 3380 mm octogonal 3380 mm octogonal 3380 mm octogonal Total Weight 656 kg 962 kg 1090 kg 1396 kg 1618 kg

Solutions for 5863903 with TRIO extension

Top Height 4.49 m 5.49 m 6.49 m 7.49 m 2544 3380 3380 3380 x x x x Bedplate size 2544 mm octogonal 3380 mm octogonal 3380 mm octogonal 3380 mm octogonal Total Weight 950 kg 1078 kg 1132 kg 1606 kg

Simplified solution for 5863903 with TRIO extension and with a manually tiltable hinged support

Top Height 3.66 m Bedplate size 2544 x 2544 mm octogonal

Total Weight 646 kg

5863903, with TRIO Extension, TRIO antenna support and optional hydraulic assistance

w w w. a m p h e n o l - ja yb e a m . co m

Information

3 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

889352