Read Ledeen%20GS+SY%20Series%20Catalogue.pdf text version

FLOW CONTROL

GS and SY Series Actuators

For on/off or modulating control of quarter-turn operated valves

GS and SY Series

Cameron customizes actuators to meet customer needs. The GS and SY series of quarter-turn actuators are offered as hydraulic and pneumatic, double-acting and spring return models.

Quarter-Turn Pneumatic

mODULAR ASSemBLy

Consistent engineering design and efficient modular assembly allows maximum operational flexibility to be achieved. Double-acting, spring fail close/open or manual override operations are combinations that are readily obtainable on the pneumatic and hydraulic products.

Quarter-Turn Hydraulic

Pneumatic Cylinder

Spring Cartridge

Frame GS Series to 57,000 in-lbs Hydraulic Cylinder

Frame SY Series to 500,000 in-lbs 2

FLOW CONTROL

FRAme STANDARD FeATUReS

· Torque outputs to 500,000 in-lbs · Scotch yoke mechanism generates powerful opening and closing torque outputs · Steel fabricated frame provides rugged foundation of modular assemblies · Chrome-plated side load bar with guide block effectively eliminates piston rod deflection · Bronze bushing interfaces provide low-friction support of sliding and rotating components · Aluminum bronze sliding blocks allow a low-friction, low-stress pin connection · Open and close travel stops provide ±3 degrees min. Pneumatic Spring Return

POWeR CyLINDeR STANDARD FeATUReS

· Steel cylinder assembly provides robust pressure containment for all conditions · Nickel-plated cylinder I.D. ensures excellent sealing surface with superior corrosion resistance · Buna piston seal configurations specifically designed for pneumatic and hydraulic applications · Composite guide band on piston provides low-friction guidance and support Hydraulic Spring Return

SPRING CARTRIDGe STANDARD FeATUReS

· Steel spring cartridge is fully enclosed from environmental conditions · Epoxy coated prestressed springs provide consistent performance with corrosion protection · Seal-welded design construction provides maximum personnel safety

TemPeRATURe RANGe

PReSSURe RANGe

P N E U M AT I C 40 to 175 psig HYDRAUlIC 145 to 3000 psig

-22 °F to 212 °F

3

GS and SY Series

The GS and SY series of actuators are available as both pneumatic and hydraulic models.

Pneumatic Spring Return (Fail Open)

4

5 3 6 10

7 1 2 8

11

9

9

1 2 3 4 5 6 7 8 9 10 11

Buna O-ring seal specifically selected for pneumatic service Self-lubricating composite guideline Cylinder is electroless nickel plated for superior sealing service and corrosion protection Accessory mounting pads Journal has large flat contact area for long life Guide bar transmits any lateral loads directly to the frame Bronze bearings on both ends of drive sleeve Frame is fabricated and totally weatherproof Travel stops are adjustable to +/-3° at both ends of stroke Spring cartridge is totally enclosed and seal welded Spring is certified for performance and is epoxy coated NOTE: Item numbers 10 and 11 are not included on double-acting models

4

FLOW CONTROL

Hydraulic Spring Return (Fail Close)

3

1

4 5 9 2 6 7 10 11

8

8

1 2 3 4 5 6 7 8 9 10 11

Spring cartridge is totally enclosed and seal welded Spring is certified for performance and is epoxy coated Accessory mounting pads Guide bar transmits any lateral loads directly to the frame Journal has large flat contact area for long life Bronze bearings on both ends of drive sleeve Frame is fabricated and totally weatherproof Travel stops are adjustable to +/-3° at both ends of stroke Cylinder is electroless nickel plated for superior sealing service and corrosion protection Buna quad-ring seal specifically selected for hydraulic service Self-lubricating composite guideline NOTE: Item numbers 1 and 2 are not included on double-acting models

5

GS and SY Series

This series of actuators offers up a variety of seal materials for a range of temperatures as well as override options.

AVAILABLe OPTIONS

· Mechanical jackscrew override · Hydraulic manual override · Fluorosilicone seals for low temperature applications -76 °F · Viton® seals for high temperature applications 392 °F Pneumatic double-acting with jackscrew Override

Pneumatic Spring Return with jackscrew Override

CeRTIFICATIONS

Cameron's GS and SY series of actuators comply with many industry standards. · ISO 9001:2000, Quality · PED 97/23/EC, Design · SI 825, Safety · IEC 61508:2000, Integrity (TUV/SIL3) Pneumatic double-acting with Hydraulic manual Override

6

FLOW CONTROL

mODeL NUmBeR DeSIGNATION

Cameron offers customizable actuators --from the frame type to the override options. A sample of the actuator selection process is shown below.

Starting with step 1, Frame Type, the components of the actuator needed to fit the customer's requirements is built. An example model number is shown below which specifically identifies each variable for selection.

Example Model Number

1 2 3 4 5 6 7

SY 14

43

SR

C

2

HMO

7

MANUAL OVERRIDE OPTION (if required) HMO: Hydraulic Manual Override JS: Jackscrew

6

5

SPRING CARTRIDGE SIZE (only required for SR models) GS Sizes: 1-10 SY Sizes: 1-5

4

FAIL POSITION FOR SPRING RETURN (only required for SR models) C: Closed O: Open

ACTUATOR TYPE DA: Double-Acting SR: Spring Return

3

POWER CYLINDER SIZE GS Sizes Pneumatic: 10, 12, 16, 20, 28 Hydraulic: 04, 05, 06 SY Sizes Pneumatic: 32, 43, 53, 64 Hydraulic: 07, 12, 13

2

TeCHNICAL DATA

For additional technical data such as torque charts, dimensional drawings, etc., refer to the GS & SY Series actuators technical data package.

ical Da ta

Techn

Descr

FRAME SIZE GS Sizes: 2, 6 SY Sizes: 7, 10, 14, 20

1

ds. er nee red as custom meet are offe rn. rs to ators iption ng retu actuato -turn actu rter and spri omizes of qua ble-acting n cust series Camero atic, dou and SY pneum The GS lic and hydrau

FRAME TYPE GS, SY

JKJ KJ N LKJF EKRW KDJAKD SK AJKa KDJAKD SA KJEJ KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD JKJ KJ N SJK NE KDJAKD KDJAKD KDJAKD LKJF KDJAKDJKJ KJ N KDJAKD KDJAKD KDJAKD EKRW KDJAKD SJK NE LKJF KDJAKD KDJAKD ABC kajske aknd;a KDJAKD SK AJKa KDJAKD KDJAKDKDJAKD KDJAKD KDJAKD KDJAKD SA KJEJ KDJAKD KDJAKD EKRW ABC kajske aknd;a SK AJKa SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SA KJEJ KDJAKDKDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKDKDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD NE KDJAKDKDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKDKDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SY ulic NEKDJAKDKDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE d KDJAKD KDJAKD dra SJK KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD GS an KDJAKD& HyKDJAKD NEKDJAKDKDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE tic KDJAKDKDJAKD KDJAKD SJK KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKDKDJAKD KDJAKD KDJAKD euma KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE Pn KDJAKDKDJAKD KDJAKD SJK NE KDJAKD KDJAKD s KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD tuator KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKDKDJAKD KDJAKD SJK NE KDJAKD Ac KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKDKDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKDKDJAKD KDJAKD SJK NEKDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKDKDJAKD KDJAKD SJK NEKDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKDKDJAKD KDJAKD SJK NEKDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKDSJK NE SJK NE KDJAKDKDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKDKDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKDSJK NE SJK NE KDJAKDKDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKDKDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKDSJK NE SJK NE KDJAKDKDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKDKDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKDSJK NE SJK NE KDJAKDKDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKDKDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKDSJK NE SJK NE KDJAKDKDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKDKDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKDSJK NE SJK NE KDJAKDKDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKDKDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE SJK NE KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE SJK NE KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD NE KDJAKD SJK KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD NE KDJAKD SJK KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD NE KDJAKD SJK KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD KDJAKD SJK NE KDJAKD KDJAKD KDJAKD KDJAKD SJK NE KDJAKD NE SJK KDJAKD SJK NE aknd;a ABC kajske

GS &

r SY Se

ies

7

FLOW CONTROL 11331 Tanner Road Houston, Texas 77041 USA Tel 1-713-280-3000 Fax 1-713-280-3056 4903-B W Sam Houston Pkwy N Houston, Texas 77041 USA Tel 1-281-809-1900 Toll Free 1-866-447-2096 24/7 Aftermarket 1-281-382-2407 Fax 1-281-809-1851 5120 67th Avenue Edmonton, Alberta T6B 3N9 Canada Tel 1-780-426-8700 Fax 1-780-426-8720 Via Gandini 4 27058 Voghera, PV Italy Tel 39-0383-343311 Fax 39-0383-62289 DRILLING & PRODUCTION SySTemS PO Box 1212 Houston, Texas 77251-1212 USA Tel 1-713-939-2211 Visit us at: www.c-a-m.com/flowcontrol

HSE Policy Statement At Cameron, we are committed ethically, financially and personally to a working environment where no one gets hurt, nothing gets harmed.

© 2008 Cameron | Viton is a registered trademark of E.I. du Pont de Nemours and Company. | Printed in USA, SWP, .5M | 07/08, WR11800

Information

8 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

311273