Read Trubky2005-1new.cdr text version

production programme

Tubes and pipes

Mittal Steel Ostrava a.s.

production programme

Tubes and pipes

Mittal Steel Ostrava a.s.

Mittal Steel Ostrava a.s.

TRADITIONAL PRODUCER OF THE HIGH QUALITY METALLURGICAL PRODUCTS

Tube Plant of Mittal Steel Ostrava a.s. is the prominent producer of seamless tubes and pipes and the only producer of spiral weld pipes in the Czech Republic. Seamless tubes and pipes are manufactured on two Stiefel mills with diameter from 21.3 mm to 273.1 mm. Spiral weld pipes are manufactured on quite automatic welding

machines with diameter from 323.9 mm to 820 mm. The tubes and pipes can be produced according to ISO, EN, DIN, ASTM, NF, BS, GOST, ÈSN, API Specifications and other standards. Mittal Steel Ostrava a.s. is authorized to use continuously the API monogram on Oil Country Tubular Goods and Line Pipes since 1957.

contents

Plain-end seamless tubes and pipes Seamless tubes suitable for screwing (threaded tubes) Flanged pipes Oil country tubular goods (OCTG) Spiral weld pipes Tubular products

certification

The Tube Plant quality of production is on the top level and is certificated by a lot of reputable external and inland institutions.

Plain-end seamless tubes and pipes

Dimensional standards

EN 10220:2002 ISO 4200:1991 CSN 42 5715:1981 CSN 42 5716:1981 DIN 2448:1981 GOST 8732:1978 ASME B36.10M:2000 KN 45 11031:1997 "Seamless and welded steel tubes - General tables of dimensions and masses per unit length" "Plain-end steel tubes, welded and seamless" "Hot-rolled seamless steel tube" "Hot-rolled seamless steel tube with small tolerances" "Seamless steel tubes" "Hot-rolled seamless steel pipes" "Welded and hot-rolled seamless steel pipes" "Casing type III" ­ seamless for deep drilling ­ sizes

Technical delivery regulations for tubes and pipes of carbon steel

CSN 42 0250:1988 CSN 42 0165:1990 DIN 1629:1984 DIN 1630:1984 DIN 17 121:1984 ASTM A 53:2004 + ASME SA 53:2001 NF A 49 ­ 112:1987 GOST 8731:1974 EN 10216-1:2002 + A1:2004 EN 10297-1:2003 "Hot rolled seamless tubes of class 10 to 16 steels" "Sheets and pipes of ferrite-pearlite steels with guaranteed impact properties at low temperatures" "Seamless circular tubes of non-alloy steels with special quality requirements" "Seamless circular tubes of non-alloy steels for extra-high requirements" "Seamless structural steel circular tubes for structural engineering purposes" "Seamless and welded black tubes suitable for zinc dipping" "Plain-end seamless hot rolled steel tubes with guaranteed room temperature properties and with special delivery conditions", all sizes that comply with DIN 2448 "Hot-rolled seamless steel pipes" "Seamless steel tubes for pressure purposes" ­ Technical delivery conditions ­ Part 1: Nonalloy steel tubes with specified room temperature properties "Seamless steel tubes for mechanical and general engineering purposes"

For tubes and pipes of high-grade carbon steel ­ for boilers

CSN 42 0251:1989 DIN 17175:1979 ASTM A 106:2004 + ASME SA 106:2001 ASTM A 192:20021 ASTM A 210:2002 1 ASTM A 333:2004 + ASME SA 333:2001 ASTM A 530:2004 + ASME SA 530M:2001 ASTM A 450:2004 NF A 49 ­ 211:19891 BS 3059 Part 2:19901 EN 10208-1,2:1997, 1996 EN 10210-1,2:1994, 1997 EN 10216-2:2002 + A1:2004 EN 10216-3:2002 +A1:2004 KN 45 11081:1997 "Seamless steel tubes with guaranteed properties at elevated temperatures" "Seamless steel tubes for elevated temperatures" quality grade I "Standard specification for seamless carbon steel pipe for high temperature service" "Standard specification for seamless carbon steel boiler tubes for high-pressure service" "Standard specification for seamless medium-carbon steel boiler and super heater tubes" "Standard specification for seamless and welded steel pipes for low-temperature service" "Standard specification for general requirements for specialized carbon and alloy steel pipe" "Standard specification for seamless carbon steel pipe for high temperature service" "Seamless plain-end unalloyed steel tubes for fluid piping at elevated temperatures" "Steel boiler and superheated tubes, Part 2: Carbon, alloy and austenitic stainless steel tubes with specified elevated temperature properties" "Steel pipes for pipelines for combustible fluids" "Hot finished structural hollow sections of no-alloy and fine grain steels" "Seamless steel tubes for pressure purposes" ­ Technical delivery conditions ­ Part 2: Nonalloy and alloy steel tubes with specified elevated temperature properties " Seamless steel tubes for pressure purposes " Part 3 ­ Alloy and fine grain steel tubes "Casing type III" ­ seamless for deep drilling ­ Technical delivery conditions"

By agreement, Tube Plant is able to supply plain-end seamless tubes and pipes of either carbon steel or high-grade carbon steel complying with other foreign standards as long as their dimensions correspond to the dimensional range of tubes and pipes made in accordance with DIN 2448, ASME B36.1M and CSN 42 5715 or CSN 42 5716.

Tube dimensions2

EN 10220:2002 (ISO 4200:1991) CSN 42 5715 (42 5716):1981 DIN 2448:1981, EN 10210-2:1997 ASTM A 53:2004, ASTM A 106:2004, ASTM A 333:2004 ASTM A 192:20021 ASTM A 210:2002 1 NF A 49 ­ 112:1987, NF A 49 ­ 211:1989 1 GOST 8732:1978 ASME B36.10 M:2000 See See See See following following following following charts charts charts charts

Ø 21.3 ­ 127.0 mm, W.T. 2.3 ­ 20.0 mm Ø 21.3 ­ 127.0 mm, W.T. 2.3 ­ 12.7 mm See following charts, W.T. max. 20 See following charts Ø 21.3 ­ 273.1 mm, W.T. 2.3 ­ 20.0 mm

1 2

The tubes according to this norm may be ordered only by previous agreement. By agreement can be manufactured also unnormalized tube outside diameters.

Steel grades

CSN 42 0250:1988 CSN 42 0251:1989 CSN 42 0165:1990 DIN 1629:1984 DIN 1630:1984 DIN 17121:19842 DIN 17175:1979 ­ Grade I GOST 8731:1974 ASTM A 53:2004, ASTM A 106:2004 ASTM A 333:2004 ASTM A 192:20021 ASTM A 210:20021 NF A 49 ­ 112:1987 NF A 49 ­ 211:19891

EN EN EN EN

10208-1,2:19971, 19961 10210-1,2:1994, 1997 10216-1, 2, 3:2002 + A1:2004 10297-1:2003

11 353.0, 11 353.1, 11 453.0, 11 453.1, 11 523.0, 11 523.11, 11 550.0, 11 550.1, 11 650.0, 11 650.1 12 021.1, 12 022.1 11 369.1, 11 503.11 St 37.0, St 44.0, St 52.0 St 37.4, St 44.4, St 52.4 RSt 37­2, St 37­3, St 44­2, St 44­3, St 52­3 St 35.8, St 45.8 10, 20, St2, St4 A, B Gr. 1, Gr. 6 A A1 TU E 220A, TU E 235A TU E 220, TU E 250, TU E 275 each the grade can be required by modification: ­ B (test of notch impact strength at +20°C) ­ B1 (test of notch impact strength at 0°C) ­ B2 (test of notch impact strength at -20°C) L210GA, L235GA, L245GA, L290GA, L360GA, L245NB, L290NB1, L360NB S235JRH, S275JOH, S275J2H, S355JOH, S355J2H, S275 NH1, S355NH1 P195TR1, P195TR2, P235TR1, P235TR2, P265TR2, P195GH, P235GH, P265GH E235, E275, E315, E355, P355N, P355NH1, E275K21, E355K21

Lengths

Plain-end tubes and pipes are supplied from carbon or high-grade carbon steel in the following lengths: Production length ­ in a range of 4 ­ 14 m, lengths selected by the producer by technological possibilities Set length ­ nominal length selected by the customer from the range of production lengths with a tolerance of ± 500 mm (according to DIN 1629, DIN 17 121 and DIN 17 175). Exact length ­ nominal length selected by the customer following agreement with the producer. Max. length of tubes: < Ø 60.3 mm 9.5 m Ø 60.3 m 12.5 m

Finish of surface and ends of tubes and pipes

Plain-end seamless tubes and pipes are supplied with the following types of surface finishing: ­ scaled outside and inside ­ by prior agreement it is possible to carry out outside and inside zinc coating according to DIN EN 10240:1998 (only up to O.D. 114.3 mm incl.) ­ with outside short term protective paint The tubes and pipes are supplied with the ends cut off perpendicular to the tube and pipe axis and de-burred. Other types of finishing may be negotiated with the producer. The tubes can be supplied with following kinds of anticorrosion protection: The adjustment can be delivered in all combinations of outside and inside kind of surface including of surface without protection. Tube diameter (mm) Outside insulation Inside insulation Lengths Producer of insulation Extruded polyethylene coating with 57.0 ­ 152.4 normal and reinforced thickness 8 ­ 12.5 m External supplier (DIN 30670:1991) Extruded polyethylene coating with 159.0 ­ 273.1 normal and reinforced thickness 6 ­ 18 m Mittal Steel Ostrava a.s. (DIN 30670:1991 ­ N-n, N-v, S-n, S-v)2 Concrete-plastic coating according to KN 42 0025:2003, event. 219.0 ­ 273.1 6 ­ 14 m Mittal Steel Ostrava a.s. FZM-N normal, FZM-S special (for protection of tube with PE coating) Cement Mortar Lining 7 ­ 13 m thickness 5 ­ 13 mm 88.9 ­ 273.1 Mittal Steel Ostrava a.s. 1 (DIN 2614:1990 ­ II-N) Bitumen overcoat3 or 108.0 ­ 273.1 Mittal Steel Ostrava a.s. alternatively others Protective bitumen varnish painting, bitumen coating reinforced with 1 or 2 8 ­ 12.5 m Mittal Steel Ostrava a.s. 159.0 ­ 273.1 layers of fiberglass matt and PVC band acc. to KN 420023:1994 or CSN 420022:1977

1 2 3

This kind of insulation is delivered out of winter period (it is approx. from 1st of April to 31st of November in current year). Wall thicknesses > 12 mm according to particular O.D. only by agreement. Only by agreement

Seamless tubes can be also supplied with following kinds of coating: For tubes with O.D. 159 mm outside bitumen insulation according to KN 42 0023:1994 or CSN 42 0022:1977.

Bundling

The pipes are tied by wire or tape with the number of ties in accordance with the customer's requirement. The pipes are supplied also in hexagonal packs by agreement with producer.

1 2

The tubes according to this norm may be ordered only by previous agreement. By agreement is possible to supply also in N performance

Plain-end seamless tubes & pipes

Dimensional range, weight and maximum length according to EN 10220:2002 (ISO 4200:1991), EN 10216:2002 + A1:2004

Outside diameter (mm) 21.3 22 25 25.4 26.9 30.

1 1

Wall thickness (mm) 2.3

1

2.6

2.9

3.2

3.6

4

4.5

5

5.4

5.6

6.3

Weight (kg/m)/max. lengths (m) 1.08/9.5 1.12/9.5 1.29/9.5 1.31/9.5 1.40/9.5 1.20/9.5 1.24/9.5 1.44/9.5 1.46 /9.5 1.56/9.5 1.76 /9.5 1.87/9.5 1.99/9.5 2.08/9.5 2.27/9.5 1.32/9.5 1.37/9.5 1.58/9.5 1.61 /9.5 1.72/9.5 1.91 /9.5 2.07/9.5 2.20/9.5 2.30/9.5 2.51/9.5 2.65/9.5 2.82/9.5 2.98/9.5 3.25/9.5 3.44/9.5 3.65 /9.5 3.87/9.5 4.11/10 4.33/9.0 4.80/8.5 5.01/8.5 1.43/9.5 1.48/9.5 1.72/9.5 1.75 /9.5 1.87/9.5 2.11 /9.5 2.26/9.5 2.41/9.5 2.51/9.5 2.75/9.5 2.90/9.5 3.09/9.5 3.26/9.5 3.56/9.5 3.77/9.5 4.01 /9.5 4.25/9.5 4.51/10 4.76/9.0 5.27/10 5.51/12 1.57/9.5 1.63/9.5 1.90/9.5 1.94 /9.5 2.07/9.5 2.34 /9.5 2.50/9.5 2.67/9.5 2.79/9.5 3.05/9.5 3.23/9.5 3.44/9.5 3.63/9.5 3.97/9.5 4.21/9.5 4.47 /9.5 4.74/9.5 5.03/12 1.71/9.5 1.78/9.5 2.07/9.5 2.11 /9.5 2.26/9.5 2.56 /9.5 2.74/9.5 2.93/9.5 3.06/9.5 3.35/9.5 3.55/9.5 3.79/9.5 4.00/9.5 4.37/9.5 4.64/9.5 4.93 /9.5 5.23/9.5 5.56/12 2.49/9.5 2.83 /9.5 3.03/15 3.24/9.5 3.38/9.5 3.72/9.5 3.94/9.5 4.21/9.5 4.44/9.5 4.86/9.5 5.16/9.5 5.49 /9.5 5.83/9.5 6.19/12 6.55/12 7.27/12 7.60/12 3.54/9.5 3.70/9.5 4.07/9.5 4.32/9.5 4.61/9.5 4.87/9.5 5.34/9.5 5.67/9.5 6.04 /9.5 6.41/9.5 6.82/12 7.21/12 8.01/12 8.38/12 4.94/9.5 1 5.22/9.51 5.72/9.5 1 6.08/9.51 6.47/9.51 6.87/9.51 7.31/12 7.74/12 8.60/12 9.00/12 5.09/9.51 5.38/9.51 5.91/9.51 6.28/9.51 6.68/9.51 7.10/9.51 7.55/12 8.0/12 8.89/12 9.00/12 5.61/9.51 5.94/9.51 6.53/9.51 6.96/9.51 7.41/9.51 7.89/9.51 8.39/12 8.89/12 9.90/12 9.00/12

31.8 33.7 35 38 40.

1

2.40/9.5 2.55/9.5

1

42.4 44.5 48.3 51.1 54.1 57 60.3 63.5 70. 73 76.1 82.5 88.9 101.6 108 114.3 127 133 139.7 141.3 152.4 159 168.3 177.8 193.7 219.1 244.5 273.0

1

2.69/9.5 2.93/9.5

5.32/11.5 5.87/11.5 5.90/10 6.16/12 6.51/10 6.81/12

1

5.24/12.5 5.75/12.5 6.44/12.5 7.11/12.5 7.95/12.5 8.77/12.5 9.42/12.5 9.74/12.5 10.8/12.5

1

6.26/12.5 7.00/12.5 7.74/12.5 8.66/12.5 9.56/12.5 10.3/12.5 10.6/12.5 11.8/12.5 6.76/12.5 7.57/12.5 8.38/12.5 9.37/12.5 10.3/12.5 11.1/12.5 11.5/12.5 12.8/12.5 8.7/12 9.63/12 10.8/12 11.9/12 12.8/12 13.3/12 14.8/12

9.27/11.5 10.3/11.5 11.5/11.5 12.7/11.5 13.7/11.5 14.1/11.5 15.8/11.5 9.83/11.5 10.9/11.5 12.2/11.5 12.1/12 12.7/12 13.6/12 14.3/12 13.5/12 15.0/12 15.8/12 14.5/12 16.2/12 17.0/12 15.0/12 16.8/12 17.6/12 16.8/12.0 18.8/12 19.7/12

13.4/11.5 15.0/11.5 16.6/11.5 17.9/11.5 18.5/11.5 20.7/11.5 15.2/12 16.8/12 18.1/12 19.6/12 18.7/12 20.3/12 21.0/12 22.7/12

16.4/12.5 18.2/12.5

17.1/12.5 19.0/12.5 20.5/12.5 21.2/12.5 23.7/12.5 18.2/12.5 20.1/12.5 21.7/12.5 22.5/12.5 25.2/12.5 21.3/12.5 23.0/12.5 23.8/12.5 26.6/12.5 25.1/12 26.0/12.5 29.1/12.5 33.1/12.5 37.0/12 41.5/11.5

The tubes can be ordered only by prior agreement.

Dimensional range, weight and maximum length according to EN 10220:2002 (ISO 4200:1991 continuation), EN 10216:2002 + A1:2004

Outside diameter (mm)) 60.3 63.5 70.0 73.0 76.1 82.5 88.9 101.6 108 114.3 127 133 139.7 141.3 152.4 159 168.3 177.8 193.7 219.1 244.5 273

1

Wall thickness (mm) 7.1 8 8.8 10 11 12.5 14.2 16 17.5 20 22.2 1 25 1

Weight (kg/m)/max. lengths (m) 9.32/12 9.88/12 10.3/12 11.0/12 12.8/12 12.8/12 11.2/12 11.89/12 13.3/12 13.95/11 14.6/12 16.0/12 17.4/12 20.1/12 16.3/12 17.9/12 19.5/12 21.1/11.5 23.6/10.5 22.6/11 24.6/10 26.3/9.5 28.0/12 31.5/12 27.5/8.5 29.4/8.5 31.4/12 35.3/11 35.1/11 38.8/101 41.8/91 47.3/81 46.5/81 52.8/91 26.2/81

1

11.0/12 11.5/12

12.1/12.5 13.4/12

1

13.2/12.5 14.7/12 14.3/12.5 16.0/12 16.5/12 18.5/12

17.7/11.5 19.7/11.5 21.5/11.5 24.2/10 18.8/12 21.0/12 22.0/12 23.2/12 23.5/12 25.4/12 21.0/12 23.5/12 24.7/12 26.0/12 26.3/12 28.5/12 22.9/12 25.7/12 27.0/12 28.4/12 28.8/12 31.2/12 25.7/12 28.9/12

39.5/9.5 43.8/8.51 41.6/9 43.9/10 44.5/10 46.2/81 48.8/91 49.4/8.51 53.8/8 56.4/10

30.3/12 33.1/11.5 37.1/10.5 32.0/10 32.4/12 34.9/10 35.3/12 39.2/11 39.7/11

49.9/9.51 55.7/6.51 52.7/81 53.4/81 58.2/7 61.1/9 65.1/8.5 69.2/8.5 59.0/71 59.8/71 65.3/6.5 68.6/8 73.1/7.5 77.8/7.5 85.7/9.5 98.2/8 111/7.5 125/6.5 71.3/6 74.9/7 80.0/7 85.2/7 93.9/8.5 108/7 122/7 137/6 82.6/6.5 88.4/6.5 94.2/6 104/7.5 120/6.5 135/6

35.1/12 38.4/11.5 43.1/10.5 48.4/9.5 40.1/12 42.7/12 45.2/12 49.6/12 56.5/12 45.2/12 50.7/11

26.6/12.5 29.8/12.5 32.6/12.5 36.7/12 28.2/12.5 31.6/12.5 34.6/12.5 39.0/12 29.9/12.5 33.5/12.5 36.7/12.5 41.4/12 32.7/12.5 36.6/12.5 40.1/12.5 45.3/12 37.1/12.5 41.6/12.5 45.6/12.5 51.6/12 41.6/12 46.6/12 46.7/12 52.3/12 51.2/12 57.3/12 57.8/12 64.9/12

48.0/12 54.0/10.5 60.1/9.5 51.0/12 55.9/12 57.3/11 63.8/9.5

62.9/12 70.1/11.5 76.0/11

63.7/12 71.8/11.5 80.1/10.5 87.0/9.5 90.2/8.5 101/8.0 98.0/8 110/7.5

63.3/12 71.5/11.5 80.6/10 71.1/12 80.3/11 90.6/9.5

The tubes can be ordered only by prior agreement.

Dimensional range, weight and maximum length according to CSN 42 5715:1981 and CSN 42 5716:1981

Outside diameter (mm)) 21.3 22 25 26.9 28 31.8 33.7 35 38 40.1 42.4 44.5 48.3 51.1 57 60.3 63.5 70. 76 82.5 89 102 108 114 127 133 140 152 159 168 178 194 219 245 273

1

Wall thickness (mm) 2.6 2.9 3.2 3.6 4 4.5 5 5.6 6.3 7

Weight (kg/m)/max. lengths (m) 1.20/9.5 1.24/9.5 1.44/9.5 1.56/9.5 1.63/9.5 1.87/9.5 1.99/9.5 2.08/9.5 2.27/9.5 2.40/9.5 2.55/9.5 1.32/9.5 1.37/9.5 1.58/9.5 1.72/9.5 1.80/9.5 2.07/9.5 2.20/9.5 2.30/9.5 2.51/9.5 2.65/9.5 2.83/9.5 2.98/9.5 3.25/9.5 3.44/9.5 3.87/9.5 4.11/10 1.43/9.5 1.48/9.5 1.72/9.5 1.87/9.5 1.96/9.5 2.26/9.5 2.41/9.5 2.51/9.5 2.75/9.5 2.90/9.5 3.09/9.5 3.26/9.5 3.56/9.5 3.77/9.5 4.25/9.5 4.51/10 4.76/9

2

1.57/9.5 1.63/9.5 1.90/9.5 2.07/9.5 2.17/9.5 2.50/9.5 2.67/9.5 2.79/9.5 3.05/9.5 3.23/9.5 3.45/9.5 3.63/9.5 3.97/9.5 4.21/9.5 4.74/9.5 5.03/12 5.32/11.5 5.90/12 6.43/12.5 7.01/12.5 7.58/12.5 8.74/12 9.27/11.52 9.82/11.52

1.71/9.5 1.78/9.5 2.07/9.5 2.26/9.5 2.37/9.5 2.74/9.5 2.93/9.5 3.06/9.5 3.35/9.5 3.55/9.5 3.79/9.5 4.00/9.5 4.37/9.5 4.64/9.5 5.23/9.5 5.55/12 5.87/11.5 6.51/12 7.10/12.5 7.74/12.5 8.39/12.5 9.67/12 10.3/11.5 10.9/11.5 12.1/12 12.7/122 13.44/11.5

2

2.49/9.5 2.61/9.5 3.03/9.5 3.24/9.5 3.39/9.5 3.72/9.5 3.94/9.5 4.21/9.5 4.44/9.5 4.86/9.5 5.16/9.5 5.83/9.5 6.19/12 6.55/12 7.27/12 7.94/12.5 8.66/12.5 9.38/12.5 10.8/12 11.5/11.5 12.2/11.5 13.6/12 14.3/12 15.0/11.5 16.4/12.5 17.2/12.5 18.2/12.5 3.54/9.5 3.70/9.5 4.07/9.5 4.32/9.5 4.61/9.5 4.87/9.5 5.34/9.5 5.67/9.5 6.41/9.5 6.82/12 7.21/12 8.02/12 8.76/12.5 9.56/12.5 10.4/12.5 12/12 12.7/11.5 13.4/12 15/12 15.8/12 16.7/11.5 18.1/12.5 19/12.5 20.1/12.5 21.3/12.5 5.09/9.51 5.38/9.51 5.71/9.51 6.28/9.51 7.10/9.51 7.55/12 8/12 8.89/12 9.72/12.5 10.6/12.5 11.5/12.5 13.3/12 14.1/11.5 15/12 16.8/12 17.6/12 18.6/11.5 20.2/12 21.2/12.5 22.4/12.5 23.8/12.5 26/12.5 5.61/9.51 5.94/9.51 6.53/9.51 6.96/9.51 7.89/9.51 8.39/12 8.89/12 9.90/12 10.8/12.5 11.8/12.5 12.9/12.5 14.9/12 15.8/11.5 16.7/12 18.8/12 19.7/12 20.8/11.5 22.6/12 23.7/12.5 25.1/12.5 26.7/12.5 29.2/12.5 33.1/12.5 37.1/12 41.5/11.5 6.12/9.51 6.48/9.51 7.14/9.51 7.61/9.51 9.65/9.51 9.2/12 9.75/12 10.89/12 11.9/12.5 13.0/12.5 14.2/12.5 16.4/12 17.4/11.5 18.5/12 20.7/12 21.8/12 23/12 25/12 26.2/12.5 27.8/12.5 29.5/12.5 32.3/12.5 36.6/12.5 41.1/12 45.9/12

1

2.69/9.5 2.93/9.5

1

4.33/9 4.80/8.5

1

5.27/12 5.75/12.5 6.26/12.5

2

5.24/12.52

1

6.78/12.52

The tubes can be ordered only by prior agreement. 2 The wall thickness is not standardized in CSN but it is possible to manufacture it.

Dimensional range, weight and maximum length according to CSN 42 5715:1981 a CSN 42 5716:1981 (continuation)

Outside diameter (mm) 60.3 63.5 70 76 82.5 89 102 108 114 127 133 140 152 159 168 178 194 219 245 273

1

Wall thickness (mm) 8 9 10 11 12.5 14 16 18 20 221 251

Weight (kg/m)/max. lengths (m) 10.3/12 11/12 12.2/12 13.4/12 11.4/12 12.1/12 13.5/12 14.9/12 16.3/11 17.8/12 20.6/12 22/11.5 23.3/12 26.2/12 27.5/12 29.1/12 31.7/12 16.3/12 17.9/12 19.5/12 22.7/11 24.2/10 25.7/12 28.9/12 30.3/12 32.1/12 35/12 36.8/12 39/12 41.4/12 45.4/12 51.5/12 58/12 64.9/12 21.2/11.5 23.6/10.5 24.7/10 26.3/9.5 27.9/12 31.5/12 27.6/9 29.4/8.5 31.3/12 35.3/11 25.9/81 30.4/71 32.5/71 34.5/11 39.0/9.5 41.1/9 43.5/10 47.7/9.5 50.1/11 53.2/10.5 56.6/11 62.2/12 28.8/81 33.9/71 36.3/6.51 38.7/101 43.8/8.51 46.2/8 48.9/8.51 53.7/8 56.4/10 60/9.5 63.9/9.5 70.2/11.5 37.2/6.51 40.0/61 42.6/91 48.4/81 51.1/7 54.2/7.51 59.5/7 62.2/9 66.6/8.5 71/8.5 78.1/11 89.2/9 101/8 113/7.5 43.4/5.51 46.4/81 52.8/71 55.7/6.51 59.2/71 65.1/6.5 68.6/8 73/7.5 77.9/7.5 85.8/9.5 98.2/8 111/7.5 125/6.5 70.5/6 74.3/7 79.2/7 84.6/6.5 93.3/8.5 107/7 121/7 136/6 82.6/6.5 88.2/6.5 94.3/6 104/6.5 120/6.5 136/6

.1

1

14.7/12 16/12 18.5/12 19.7/11.5 20.9/12 23.5/12 24.7/12 26/12 28.4/12

33.1/11.5 37.2/10.5 35/12 38.3/11.5 40.2/12 42.6/12 45.3/12 49.6/12 56.4/12 63.5/12 71.1/12 39.3/11 43/10.5 45.2/12 47.9/12 51/12 56/12 63.7/12 71.7/11.5 80.3/11

29.8/12.5 33.3/12.5 31.6/12.5 35.3/12.5 33.5/12.5 37.5/12.5 36.7/12.5 41.1/12.5 41.6/12.5 46.6/12.5 46.8/12 52.3/12 52.4/12 58.6/12

70.8/11.5 80.1/10.5 79.8/10 89.4/9.5 90.4/8.5 101/8

The tubes can be ordered only by prior agreement.

Dimensional range, weight and maximum length according to DIN 2448:1981, NF A 49 ­ 112:1987, EN 10210-1, 2:1994, 1997

Outside diameter (mm) 21.3 25. 2 26.9 31.8 33.7 38 42.4 44.5 48.3 51.1 57 60.3 63.5 70.1 73

.2 1

Wall thickness (mm) 2.3

1

2.6

2.9

3.2

3.6

4

4.5

5

5.6

63

6.3

Weight (kg/m)/max. lengths (m) 1.08/9.5 1.29/9.5 1.4/9.5 1.2/9.5 1.44/9.5 1.56/9.5 1.87/9.5 1.99/9.5 2.27/9.5 2.55/9.5 2.69/9.5 2.93/9.5 1.32/9.5 1.58/9.5 1.72/9.5 2.07/9.5 2.2/9.5 2.51/9.5 2.82/9.5 2.98/9.5 3.25/9.5 3.44/9.5 3.87/9.5 4.11/9 4.33/9.5 4.80/8.5 5.01/8.5 1.43/9.5 1.72/9.5 1.87/9.5 2.26/9.5 2.41/9.5 2.75/9.5 3.09/9.5 3.26/9.5 3.56/9.5 3.77/9.5 4.25/9.5 4.51/10 4.76/9.5 5.27/12 5.51/12 1.57/9.5 1.9/9.5 2.07/9.5 2.5/9.5 2.67/9.5 3.05/9.5 3.44/9.5 3.63/9.5 3.97/9.5 4.21/9.5 4.74/9.5 5.03/12 5.32/10 5.90/12 6.16/12 1.71/9.5 2.07/9.5 2.26/9.5 2.74/9.5 2.93/9.5 3.35/9.5 3.79/9.5 4.00/9.5 4.37/9.5 4.64/9.5 5.23/9.5 5.55/12 2.49/9.5 3.03/9.5 3.24/9.5 3.72/9.5 4.21/9.5 4.44/9.5 4.86/9.5 5.16/9.5 5.83/9.5 6.19/12 3.54/9.5 4.07/9.5 4.61/9.5 4.87/9.5 5.34/9.5 5.67/9.5 6.41/9.5 6.82/12 5.09/9.51 5.38/9.51 5.91/9.51 6.28/9.51 7.10/9.51 7.55/12 8/11.5 8.89/12 9.31/12 5.39/9.51 5.71/9.51 6.27/9.51 6.67/9.51 7.56/9.51 8.05/12 5.61/9.51 5.94/9.51 6.53/9.51 6.96/9.51 7.89/9.51 8.39/12

5.87/10.5 6.55/11.5 7.21/11.5 6.51/12 6.81/12 7.27/12 7.6/12 8.02/12 8.38/12

8.52/11.5 8.89/11.5 9.48/12 9.93/12 9.90/12 10.4/12

76.1 82.5

1, 2

5.24/12.5 5.75/12.5 6.44/12.5 7.11/12.5 7.95/12.5 8.77/12.5 9.74/12.5 10.39/12.5 10.8/12.5 6.26/12.5 7.00/12.5 7.74/12.5 8.66/12.5 9.56/12.5 10.6/12.5 11.34/12.5 11.8/12.5 6.76/12.5 7.57/12.5 8.38/12.5 9.37/12.5 10.37/12.5 11.5/12.5 12.29/12.5 12.8/12.5 8.7/12 9.63/12 10.8/12 11.9/12 13.3/12 14.17/12 14.8/12

88.9 101.6 108 114.3 127 133 139.7 152.4 159 168.3 177.8.2 193.7 219.1 244.5 273

1 2 3

9.27/11.5 10.3/11.5 11.5/11.5 12.7/11.5 14.1/11.5 15.12/11.5 15.8/11.5 9.83/11.5 10.9/11.5 12.2/11.5 12.1/12 12.7/12 13.4/11.5

.2

13.5/12 15/12 15.8/12

15/12 16.8/12 17.6/12

16.05/12 17.93/12 18.82/12

16.8/12 18.8/12 19.7/12

13.6/12 14.3/12 15/11.5

16.6/11.5 18.5/11.5 19.81/11.5 20.7/11.5 20.3/12 21.70/12 22.7/12

16.4/12.5 18.2/12.5 17.1/12.5 19/12.5

21.2/12.5 22.67/12.5 23.7/12.5

18.2/12.5 20.1/12.5 22.5/12.5 24.05/12.5 25.2/12.5 21.3/12.5 23.8/12.5 25.46/12.5 26.6/12.5 26/12.5 27.82/12.5 29.1/12.5 33.1/12.5 37/12 41.5/11.51

Out of standard size according to specification CSN 42 5715 (42 5716). The tubes except NF A 49 ­ 112 size range can be ordered only by prior agreement. The wall thickness ­ according to EN 10210 only.

Dimensional range, weight and maximum length according to DIN 2448:1981, NF A 49 ­ 112:1987, EN 10210-1, 2:1994, 1997 (continuation)

Outside diameter (mm) 60.3 63.5 73

.2

Wall thickness (mm) 7.1 8 8.8 10 11 12 3 12.5 14.2 16 17.5 20 22.2 1 25 1

Weight (kg/m)/max. lengths (m) 9.32/12 10.3/12 11.2/12 9.88/12 10.9/12 11.89/12 11.5/12 12.8/12 13.95/11 12.1/12.5 13.4/12 14.6/12 16.3/12

76.1 82.5 88.9 101.6 108 114.3 127 133 139.7 152.4.2 159 168.3

1, 2

13.2/12.5 14.7/12 16.0/12 17.9/12 14.3/12.5 16/12 17.4/12 19.5/12 21.1/11.5 22.79/11 23.6/10.5 26.2/81 27.5/9

16.5/12 18.5/12 20.1/12 22.6/11 24.6/10 26.56/9.2

17.7/11.5 19.7/11.5 21.5/11.5 24.2/10 26.3/9.5 28.45/8.7 29.4/8.5 18.8/12 21/12 22/12 23.2/12 21/12 22.9/11 25.7/12 28/9.12 30.32/12 31.4/12 35.1/11 38.8/101 41.8/91 46.5/81 52.8/71 55.7/6.5

1

23.5/12 25.7/12 28.9/12 31.5/12 34.09/11.2 35.3/11 39.5/9.5 43.8/6.51 47.3/81 24.7/12 26/12 27/12 28.4/12 30.3/12 33.1/11.5 35.86/10.8 37.2/10.5 41.6/9 32/12 34.9/12 37.85/11 46.2/81 49.9/7.51

1

39.2/11 44.0/10 48.8/8.5 53.8/8

52.7/8

1

59.0/71

25.4/12 28.5/12 31.2/12 35.1/12 38.4/11.5 41.61/10.5 43.1/10.5 48.4/9.5 26.6/12.5 29.8/12.5 32.6/12.5 36.7/12 40.1/12 28.2/12.5 31.6/12.5 34.6/12.5 39/12 42.7/12 43.57/12 46.33/12 49.14/12 53.86/12 61.38/12

58.2/7 65.3/6.5 71.3/6 61.1/9 68.6/8 74.9/7 82.6/6.5

45.2/12 50.7/11 56.4/10 48/12 51/12

54/10.5 60.1/9.5 65.1/8.5 73.1/7.5 80.0/7 88.4/6.5 57.3/11 63.8/9.5 69.2/8.5 77.8/7.5 85.2/7 94.2/6

177.8.2 29.9/12.5 33.5/12.5 36.7/12.5 41.4/12 45.2/12 193.7 219.1 244.5 273

1

32.7/12.5 36.6/12.5 40.1/12.5 45.3/12 49.6/12 37.1/12.5 41.6/12.5 45.6/12.5 51.6/12 56.5/12

55.9/12 62.9/12 70.1/11.5 76/11 63.7/12 71.8/11.5 80.1/10.5 87/9.5 98/8

85.7/9.5 93.9/8.5 104/7.5 98.2/8 111/7.5 108/7 122/7 137/6 120/6.5 135/6

41.6/12 46.7/12 51.2/12 57.8/12 63.3/12 68.91/11.5 71.5/11.5 80.6/10 90.2/8.5 46.6/12 52.3/12 57.3/12 64.9/12 71.1/12 77.36/11 80.3/11 90.6/9.5 101/8

110/7.8 125/6.5

The tubes can be ordered only by prior agreement. 2 The tubes except NF A 49 ­ 112 size range can be ordered only by prior agreement 3 The wall thickness ­ according to EN 10210 only.

Dimensional range, weight and maximum length according to ASTM A 53:2004, ASTM A 106:2004, ASTM A 333:2004

Size NPS 1/2 Outside diameter in 0.840 mm 21.3 Wall thickness in 0.109 0.147 3/4 1.050 26.7 0.113 0.154 1 1.315 33.4 0.133 0.179 1 1/4 1.660 42.2 0.140 0.191 1 1/2 1.900 48.3 0.145 0.200 2 2.375 60.3 0.154 0.218 2 1/2 2.875 73.0 0.203 0.276 3 3.500 88.9 0.125 0.156 0.188 0.216 0.250 0.281 0.300 0.438 3 1/2 4.000 101.6 0.125 0.156 0.188 0.226 0.250 0.281 0.318 4 4.500 114.3 0.156 0.188 0.219 0.237 0.250 0.281 0.312 0.337 0.438 mm 2.77 3.73 2.87 3.91 3.38 4.55 3.56 4.85 3.68 5.08 3.91 5.54 5.16 7.01 3.18 3.96 4.78 5.49 6.35 7.14 7.62 11.13 3.18 3.96 4.78 5.74 6.35 7.14 8.08 3.96 4.78 5.56 6.02 6.35 7.14 7.92 8.56 11.13 lb/ft 0.85 1.09 1.13 1.48 1.68 2.17 2.27 3.00 2.72 3.63 3.66 5.03 5.80 7.67 4.51 5.58 6.66 7.58 8.69 9.67 10.26 14.34 5.18 6.41 7.66 9.12 10.02 11.17 12.52 7.24 8.67 10.02 10.80 11.36 12.67 13.97 15.00 19.02 Weight kg/m 1.27 1.62 1.69 2.20 2.50 3.24 3.39 4.47 4.05 5.41 5.44 7.48 8.63 11.41 6.72 8.29 9.92 11.29 12.93 14.40 15.27 21.35 7.72 9.53 11.41 13.57 14.92 16.63 18.63 10.78 12.91 14.91 16.07 16.90 18.87 20.78 22.32 28.32 Weight class STD XS STD XS STD XS STD XS STD XS STD XS STD XS ... ... ... STD ... ... XS ... ... ... ... STD ... ... XS ... ... ... STD ... ... ... XS ... Schedule No. 40 80 40 80 40 80 40 80 40 80 40 80 40 80 ... ... ... 40 ... ... 80 160 ... ... ... 40 ... ... 80 ... ... ... 40 ... ... ... 80 120 Max. length ft 31.17 31.17 31.17 31.17 31.17 31.17 31.17 31.17 31.17 31.17 37.73 37.73 39.37 39.37 39.37 39.37 39.37 41.01 39.37 39.37 39.37 36.09 37.73 39.37 39.37 39.37 39.37 39.37 39.37 37.73 37.73 39.37 41.01 39.37 39.37 39.37 39.37 34.45 m 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.5 12.0 12.0 12.0 11.5 11.5 12.0 12.0 12.0 12.0 12.0 12.0 11.5 11.5 12.0 12.5 12.0 12.0 12.0 12.0 12.0

Dimensional range, weight and maximum length according to ASTM A 53:2004, ASTM A 106:2004, ASTM A 333:1999 (continuation)

Size NPS 5 Outside diameter in 5.563 mm 141.3 Wall thickness in 0.156 0.188 0.219 0.258 0.281 0.312 0.344 0.375 0.500 6 6.625 168.3 0.188 0.219 0.250 0.280 0.312 0.344 0.375 0.432 0.500 0.562 0.719 8 8.625 219.1 0.250 0.277 0.312 0.322 0.344 0.375 0.406 0.438 0.500 0.562 0.719 10 10.750 273.1 0.250 0.279 0.307 0.344 0.365 0.438 0.500 0.594 0.719 mm 3.96 4.78 5.56 6.55 7.14 7.92 8.74 9.52 12.70 4.78 5.56 6.35 7.11 7.92 8.74 9.52 10.97 12.70 14.27 18.26 6.35 7.04 7.92 8.18 8.74 9.52 10.31 11.13 12.70 15.09 18.26 6.35 7.09 7.80 8.74 9.27 11.13 12.70 15.09 18.26 lb/ft 9.02 10.80 12.51 14.63 15.87 17.51 19.19 20.80 27.04 12.94 15.00 17.04 18.99 21.06 23.10 25.05 28.60 32.74 36.43 45.39 22.38 24.72 27.73 28.58 30.45 33.07 35.67 38.33 43.43 51.00 60.77 28.06 31.23 34.27 38.27 40.52 48.28 54.79 64.49 77.10 Weight kg/m 13.41 16.09 18.61 21.77 23.62 26.05 28.57 30.94 40.28 19.27 22.31 25.36 28.26 31.32 34.39 37.28 42.56 48.73 54.20 67.56 33.31 36.81 41.24 42.55 45.34 49.20 53.08 57.08 64.64 75.92 90.44 42.09 46.49 51.01 56.96 60.29 71.87 81.52 95.97 114.70 Weight class ... ... ... STD ... ... ... XS ... ... ... ... STD ... ... ... XS ... ... ... ... ... ... STD ... ... ... ... XS ... ... ... ... ... ... STD ... XS ... ... Schedule No. ... ... ... 40 ... ... ... 80 120 ... ... ... 40 ... ... ... 80 ... 120 160 20 30 ... 40 ... ... 60 ... 80 100 120 20 ... 30 ... 40 ... 60 80 100 Max. length ft 37.73 39.37 39.37 39.37 39.37 37.73 37.73 36.09 36.09 39.37 39.37 39.37 39.37 39.37 39.37 39.37 39.37 36.09 32.80 26.25 39.37 39.37 39.37 39.37 39.37 39.37 39.37 39.37 39.37 36.09 31.17 39.37 39.37 39.37 39.37 39.37 39.37 36.09 31.17 23.95 m 11.5 12.0 12.0 12.0 12.0 12.0 12.0 12.0 11.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 11.0 10.0 8.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 11.0 9.0 12.0 12.0 12.0 12.0 12.0 12.0 10.5 8.5 7.0

Dimensional range, weight and maximum length according to GOST 8732:1978

Outside diamete r (mm) 25 28 32 38 42 45 57 60 63.5 73 76 89 102 108 114 127 133 140 146 152 159 168 194 219 245 273

1

Wall thickness (mm) 2.5 2.8 3 3.5 4 4.5 5 5.5 6 7 8

Weight (kg/m)/max. lengths (m) 1.39/9.5 1.57/9.5 1.82/9.5 2.19/9.5 1.53/9.5 1.74/9.5 2.02/9.5 2.43/9.5 2.71/9.5 2.91/9.5 1.63/9.5 1.85/9.5 2.15/9.5 2.59/9.5 2.89/9.5 3.11/9.5 4.00/10 4.22/10 4.48/9 5.18/8.5 1.86/9.5 2.11/9.5 2.46/9.5 2.98/9.5 3.32/9.5 3.58/9.5 4.62/10 4.88/12 2.07/9.5 2.37/9.5 2.76/9.5 3.35/9.5 3.75/9.5 4.04/9.5 5.23/10 5.52/12 2.61/9.5 3.05/9.5 3.72/9.5 4.16/9.5 4.49/9.5 5.83/10 6.16/12 6.55/12 7.60/12 4.07/9.5 4.56/9.5 4.93/9.5 6.41/10 6.78/12 7.21/12 8.39/12 4.95/9.51 5.36/9.51 6.99/9.51 7.39/12 7.87/12 9.16/12 5.33/9.51 5.77/9.51 7.55/9.51 7.99/12 8.51/12 9.91/12 9.15/12 9.75/12 11.39/12 10.26/12 10.95/12 12.82/12

5.18/11.5 5.87/11.5 6.00/12 6.81/12

5.40/12.5 6.26/12.5 7.10/12.5 7.94/12.5 8.76/12.5 9.56/12.5 10.36/12.5 11.91/12.5 13.42/12 7.38/12.5 8.39/12.5 9.38/12.5 10.36/12.5 11.33/12.5 12.28/12.5 14.16/12.5 15.98/12 8.50/12 9.67/12 10.82/12 11.96/12 13.09/12 14.21/12 16.40/12 18.55/12

10.26/11.5 11.49/11.5 12.70/11.5 13.90/11.5 15.09/11.5 17.44/11.5 19.73/11.5 10.85/11.5 12.15/11.5 13.44/12 12.13/12 12.7/12 13.60/12 14.26/12 15.04/12 15.78/12 14.72/12 16.48/12 17.29/12 15.98/12 17.90/12 18.79/12 18.47/12 20.72/12 21.75/12 20.91/12 23.48/12 24.66/12 26.04/12

15.04/11.5 16.65/11.5 18.24/11.5 19.83/12.5 22.96/12 15.70/12 17.39/12 19.06/12

1

20.72/11 21.60/12

1

24.00/12 27.23/11.5 25.03/121 28.41/121

16.37/12.5 18.13/12.5 19.87/12

17.15/12.5 18.99/12.5 20.82/12.5 22.64/12.5 26.24/12.5 29.79/12.5 20.10/12.5 22.04/12.5 23.97/12.5 27.79/12.5 31.57/12.5 25.57/12.5 27.82/12.5 32.28/12.5 36.70/12.5 31.52/12 36.60/12.5 41.63/12.5 41.09/12 45.92/12 46.76/12 52.28/12

The tubes can be ordered only by prior agreement.

Dimensional range, weight and maximum length according to GOST 8732:1978 (continuation)

Outside diameter (mm) 76 89 102 108 114 127 133 140 146. 152 159 168 194 219 245 273

1

Wall thickness (mm) 9 10 11 12 14 16 17 18 20

Weight (kg/m)/max. lengths (m) 14.87/11 17.76/12 20.64/12 21.97/11.5 23.31/12 26.19/12 27.52/12 29.08/12 16.3/12 19.48/12 22.69/11 24.17/10 25.65/12 28.85/12 30.33/12 32.06/12 33.54/11.5 35.02/12

1

21.16/11.5 24.69/10 26.31/9.5 27.94/12 31.47/12 33.10/12 35.00/12 36.62/11 38.25/11.51 40.15/12 42.59/12 49.64/12 56.43/12 63.48/12 71.07/121

22.82/11 26.67/9 28.45/8.5 30.23/11.5 34.08/12 35.86/10.5 37.88/11 39.66/10 41.43/10.5 43.50/12 46.17/12 53.86/12 61.26/12 68.95/11.5 77.24/111 47.65/9.5 50.06/11 53.17/10.5 62.15/12 70.78/11.5 79.76/10 89.42/9.5 53.66/8 56.43/10 59.98/9.5 70.24/11.5 80.10/10.5 90.36/8.5 101.41/81 56.60/7 59.53/9 63.31/8.5 74.21/11 84.69/9.5 95.59/8 107.33/7.5

1

1

30.41/11.5 31.74/121 33.29/12.5 35.29/12.5 41.06/12.5 46.61/12.5 52.38/12 58.60/12

59.48/6.5 62.59/9 66.59/8.5 78.13/11 89.23/9 100.77/8 113.20/7.5

1

65.11/6 68.56/8 73.00/7.5 85.82/7.5 98.15/8 110.98/7.5 124.79/6.51

36.75/12 38.97/12 45.38/12 51.54/12 57.95/12 64.86/12

The tubes can be ordered only by prior agreement.

Seamless tubes suitable for screwing (threaded tubes)

Dimensional standards

CSN 42 5710:1976 CSN 42 5711:1976 DIN 2440:1978 DIN 2441:1978 NF A 49­115:1978 UNI 8863:19871 EN 10255:2004 "Steel tubes suitable for screwing ­ medium series" "Steel tubes suitable for screwing ­ heavy series" "Steel tubes, medium weight suitable for screwing" "Steel tubes, heavy weight suitable for screwing" "Hot-rolled seamless steel tubes suitable for threading" "Seamless and welded carbon steel tubes, suitable for screwing" (threads according to UNI ISO 7/1) "Non-alloyed steel tubes suitable for screwing"

Dimensional range

According to CSN 42 5710:1976, DIN 2440:1978, CSN 42 5711:1976, DIN 2441:1978 Size DN 15 20 25 32 40 50 65 80 90 100 125 NPS 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 Outside diameter mm 21.3 26.9 33.7 42.4 48.3 60.3 76.1 88.9 102.1 114.3 139.7 CSN 42 5710, DIN 2440 mm 2.65 2.65 3.25 3.25 3.25 3.65 3.65 4.05 4.05 4.50 4.85 Wall thickness CSN 42 5711, DIN 2441 mm 3.25 3.25 4.05 4.05 4.05 4.50 4.50 4.85 4.85 5.40 5.40

According to NF A 49­115:1978, EN 10255:2004 Size DN 15 20 25 32 40 50 65 80 90 100 125 NPS 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 Outside diameter mm 21.3 26.9 33.7 42.4 48.3 60.3 76.1 88.9 101.6 114.3 139.7 Middle series mm 2.6 2.6 3.2 3.2 3.2 3.6 3.6 4.0 4.0 4.5 4.5 (5.0) Wall thickness Heavy series mm 3.2 3.2 4.0 4.0 4.0 4.5 4.5 4.9 (5.0) 4.9 5.4 5.4

The data in brackets are sizes according to EN 10255.

1

The tubes can be ordered only by prior agreement.

According to UNI 8863:1987 Light series DN 15 20 25 32 40 50 65 80 100 Middle series DN 15 20 25 32 40 50 65 80 100 125 Heavy series Size DN (") (mm) 15 1/2 21.3 20 3/4 26.9 25 1 33.7 32 1 1/4 42.4 40 1 1/2 48.3 50 2 60.3 65 2 1/2 76.1 80 3 88.9 100 4 114.3 125 5 139.7 Wall thickness tolerance: -12.5% of NWT/ +10% of tube weight (it is valid for all series). Wall thickness (mm) 3.2 3.2 4.0 4.0 4.0 4.5 4.5 5.0 5.4 5.4 Size (") 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 5 (mm) 21.3 26.9 33.7 42.4 48.3 60.3 76.1 88.9 114.3 139.7 Wall thickness (mm) 2.6 2.6 3.2 3.2 3.2 3.6 3.6 4.0 4.5 5.0 Size (") 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 (mm) 21.3 26.9 33.7 42.4 48.3 60.3 76.1 88.9 114.3 Wall thickness (mm) 2.3 2.3 2.9 2.9 2.9 3.2 3.2 3.6 4.0

Steel grades

Seamless tubes suitable for screwing are supplied in accordance with CSN 42 5710:1976 and CSN 42 5711 in grade 11 353.0, 11 353.1 and according to DIN 2240:1978 and DIN 2441:1978 in grade St 33 complying with DIN 17100:1980. Tubes in accordance with NF A 49 ­ 115:1978 are supplied in grade TU 34­1, according to UNI 8863:1987 in grade Fe 330 and tubes according to EN 10255:2004 in grade S195T.

Lengths

The tubes are supplied in production lengths. The supply of exact lengths shall be negotiated beforehand with the producer.

Finishing of surface and ends of tubes

Tubes suitable for screwing are supplied with surfacing in accordance with customer's requirements: ­ scaled inside and outside ­ galvanized inside and outside1 ­ coated outside with a short-term protective paint Tubes are supplied plain-end only.

Bundling and supply mode

This is the same as for plain-end tubes of corresponding lengths.

1

The tubes can be ordered only by prior agreement (cooperation with external maker)

Seamless tubes suitable for screwing (threaded tubes)

Flanged pipes

Tube Plant manufactures the following flanged pipes

With double bordering and loose flanges for PN 10, 16, 25, 40 according to KN 42 5792:1995. The pipes used for manufacturing flanged pipes in accordance with KN must comply with CSN 42 5715:1981 and CSN 42 0250:1988.

Dimensions and weights of pipe for PN 10, 16, 25, 40 (KN 42 5792:1995)

Tube PN 10 --16 10 --16 10 --16 10 --16 25 --40 25 --40 25 --40 25 DN 80 100 150 200 80 100 150 200 D4 x t 89 × 3.6 108 × 4 159 × 4.5 219 × 6.3 89 × 3.6 108 × 4 159 × 4.5 219 × 6.3 D3 113 ÷ 135 135 ÷ 155 191 ÷ 212 245 ÷ 268 113 ÷ 135 135 ÷ 155 191 ÷ 212 278 b = 2t 7.2 8 9 12.6 7.2 8 9 12.6 D 94 113 164 225 94 113 164 225 D1 200 (195) 220 (215) 285 (280) 340 (335) 200 (195) 235 (230) 300 360 Flange D2 160 180 240 295 160 190 250 310 a 18 18 18 20 24 24 30 30 z 3 3 3 3 3 3 3 3 d 18 18 22 (23) 22 (23) 18 22 (23) 26 (27) 26 (27) Screw holes Number 8 (4) 8 8 8 --12 8 8 8 12 Weight PlainThread end pipe kg/m M16 7.58 10.3 17.2 33.1 7.58 10.3 17.2 33.1 2 flanges 2 borders » kg 7.72 (7.56) 9.26 (8.78) 14.64 (13.94) 24.48 (23.48) 24.44 (23.48) 10.05 (9.47) 13.68 (12.88) 25.58 (25.43) 35.7 (35.46)

M16 M20 M20 M16 M20 M24 M24

The meaning of D1, D2, D3, etc. is given in the above mentioned standard KN 42 5792.

Material data

Pipes: Loose flanges: both types of flanged pipes are made in steel grade 11 353.0 or .1 supplied either forged in steel grade 11 373, 11 375 or in malleable cast or cast steel.

Finishing

Flanged pipes with a double border on both ends are supplied with black surface. According to a customer's special request other type of finish can be supplied with prior agreement.

Lengths

Flanged pipes can be supplied: ­ In limited lengths ­ most frequent supplies (4 ­ 6 m) ­ In set lengths with a tolerance of ±500 mm or in the range of 1000 mm ­ In exact lengths (exceptional requirement of customer) with tolerance +100/-0 mm

Surface

Flanged pipes with double bordering and loose flanges are supplied with a scaled surface. On special customer's request and following agreement other type of surface finishing can be supplied with prior agreement.

Flanged pipes

Oil Country Tubular Goods (OCTG)

Grade Range

Casing and Tubing are supplied according to API Spec 5CT, Drill Pipe according to API Spec 5D and Line Pipe according to API Spec 5L. Type of pipe API Specification Version of API Specification 2nd edition, 1989 C75-2 H40, J55, K55, M651, N80-12, N80Q2 L80-1, C95 P110 High Collapse5 NH L80 HC, NH C95 HC, NH P110 HC H40, J55, N80-12, N80Q2, L80-1, C951, 4, P110 1 E75, X95, G105 PSL 1: A, B, X42, X46, X521, X561 Spec 5L 43rd edition, 2004 PSL 2 3: B, X42, X521 Grade

Casing

Spec 5CT

7th edition, 2001

Tubing Drill Pipe

Spec 5CT Spec 5D

7th edition, 2001 5th edition 2002

Line Pipe (seamless)6

1 2 3

Supply in these grades shall be pre-negotiated Supplied by producer option or by agreement with customer Only grades B and X42 in sizes 114.3 and higher 4 Without monogram API (latest version of API Spec 5CT grade C95 does not cover Tubing) 5 By agreement it is possible to guarantee stability against outside press collapsing incl. making of relevant test for High Collapse, refer corresponding schedule. 6 Line Pipe with spiral weld ­ see next chapter "Spiral-weld pipes"

Detailed supply specifications of oil country tubular goods of the above grades according to size are set out in the dimension tables.

Casing according to API Spec 5CT (7th edition, 2001) Dimensional range, weight, grade

Outside diameter in 4 1 /2 mm 114.30 Wall thickness in 0.205 0.224 0.250 0.290 5 127.00 0.337 0.220 0.253 0.296 5 1 /2 139.70 0.362 0.244 0.275 0.304 0.361 6 5 /8 168.28 0.415 0.288 0.352 0.417 7 177.80 0.475 0.272 0.317 0.362 0.408 0.453 7 5 /8 193.68 0.498 0.300 0.328 0.375 0.430 8 5 /8 219.08 0.500 0.304 0.352 0.400 0.450 9 /8

5

mm 5.21 5.69 6.35 7.37 8.56 5.59 6.43 7.52 9.19 6.20 6.99 7.72 9.17 10.54 7.32 8.94 10.59 12.07 6.91 8.05 9.19 10.36 11.51 12.65 7.62 8.33 9.53 10.92 12.70 7.72 8.94 10.16 11.43 12.70 8.94 10.03 11.05 11.99 13.84 8.89

Nominal weight of threaded pipe with coupling lb/ft kg/m 9.50 14.14 10.50 15.63 11.60 13.50 15.10 11.50 13.00 15.00 18.00 14.00 15.50 17.00 20.00 23.00 20.00 24.00 28.00 32.00 20.00 23.00 26.00 29.00 32.00 35.00 24.00 26.40 29.70 33.70 39.00 28.00 32.00 36.00 40.00 44.00 36.00 40.00 43.50 47.00 53.50 40.50

1 1

Max. length range 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 2 3 3 3 3 3 3

Grade 3 H, J, K J, K J, K, N, L, C, P N, L, C, P P J, K J, K J, K, L, N, C, P N, L, C, P H, J, K J, K J, K, N, L, C, P N, L, C, P N, L, C, P H, J, K J, K, N, L, C, P N, L, C, P N, L, C, P H, J, K N, L, J, K, C J, K, N, L, C, P N, L, C, P N, L, C, P N, L, C, P H J, K, N, L, C N, L, C, P N, L, C, P N, L, C, P H H, J, K J, K, N, L, C N, L, C, P N, L, C, P H, J, K J, K, N, L, C N, L, C, P N, L, C, P N, L, C, P J, K

Type of thread short short, buttress short, long, buttress long, buttress long, buttress short short, long, buttress, HSC2 short, long, buttress, HSC2 long, buttress, HSC2 short short, long, buttress, HSC short, long, buttress, HSC long, buttress, HSC long, buttress, HSC short, long, buttress, HSC2 short, long, buttress, HSC2 long, buttress, HSC2 long, buttress, HSC2 short short, long, buttress, HSC short, long, buttress, HSC long, buttress, HSC long, buttress, HSC long, buttress, HSC short short, long, buttress, HSC2 long, buttress, HSC2 long, buttress, HSC2 long, buttress, HSC2 short short, long, buttress, HSC2 short, long, buttress, HSC2 long, buttress, HSC2 long, buttress, HSC2 short, long, buttress, HSC2 short, long, buttress, HSC2 long, buttress, HSC2 long, buttress, HSC2 long, buttress, HSC2 short, buttress

17.26 20.09 22.47 17.11 19.35 22.32 26.79 20.83 23.07 25.30 29.76 34.23 29.76 35.72 41.67 47.62 29.76 34.23 38.69 43.16 47.62 52.09 35.72 39.29 44.20 50.15 58.04 41.67 47.62 53.57 59.53 65.48 53.57 59.53 64.74 69.94 79.61 60.27

1 1

1 1 1 1 1 1 1 1

1 1 1 1 1

1 1 1

1 1 1 1

244.48

0.500 0.352 0.395 0.435 0.472 0.545 0.350

1 1 1 2

10 /4

1 2

3

273.05

The pipes can also be supplied with a gastight connection with prior agreement Supplied with prior agreement only. 3 It is possible to supply grade M65 according to 7th release of API Spec 5CT. By agreement it is possible to do High Collapse test for grades mentioned in following table By agreement with the producer may also be supplied the casings according to standard GOST 632:1980, O. D. 5 ¾", wall thickness 6.5, 7.0, 7.7, 8.5, 9.5, 10.7 mm.

Oil country tubular goods (OCTG)

High Collapse ­ Casing according to API Spec 5CT (7th edition, 2001) Dimensional range, weight, grade

Nominal outside diameter in 4 1/2 mm 114.30 114.30 114.30 114.30 114.30 5 127.00 127.00 127.00 127.00 5 1/2 139.70 139.70 139.70 139.70 139.70 6 5/8 168.28 168.28 168.28 168.28 7 177.80 177.80 177.80 177.80 177.80 177.80 7 5/8 193.68 193.68 193.68 193.68 193.68 8 5/8 219.08 219.08 219.08 219.08 219.08 9 5/8 244.48 244.48 244.48 244.48 244.48 Nominal wall thickness in 0.205 0.224 0.250 0.290 0.337 0.220 0.253 0.296 0.362 0.244 0.275 0.304 0.361 0.415 0.288 0.352 0.417 0.475 0.272 0.317 0.362 0.408 0.453 0.498 0.300 0.328 0.375 0.430 0.500 0.304 0.352 0.400 0.450 0.500 0.352 0.395 0.435 0.472 0.550 mm 5.21 5.69 6.35 7.37 8.56 5.59 6.43 7.52 9.19 6.20 6.98 7.72 9.17 10.54 7.32 8.94 10.59 12.06 6.91 8.05 9.19 10.36 11.51 12.65 7.62 8.33 9.52 10.92 12.70 7.72 8.94 10.16 11.43 12.70 8.94 10.03 11.05 11.99 13.84 Nominal weight lb/ft 9.50 10.50 11.60 13.50 15.10 11.50 13.00 15.00 18.00 14.00 15.50 17.00 20.00 23.00 20.00 24.00 28.00 32.00 20.00 23.00 26.00 29.00 32.00 35.00 24.00 26.40 29.70 33.70 39.00 28.00 32.00 36.00 40.00 44.00 36.00 40.00 43.50 47.00 53.50 Proportion NH L80 HC D/t 21.94 20.09 18.00 15.51 13.35 22.72 19.75 16.89 13.82 22.53 20.01 18.10 15.23 13.25 22.99 18.82 15.89 13.95 25.73 22.09 19.35 17.16 15.45 14.06 25.42 23.25 20.34 17.74 15.25 28.38 24.51 21.56 19.17 17.25 27.35 24.37 22.12 20.39 17.66 psi 4 860 5 960 7 350 9 160 11 040 4 450 6 180 8 130 10 600 4 550 6 010 7 280 9 380 11 140 4 320 6 790 8 870 10 480 3 180 4 780 6 440 7 930 9 210 10 380 3 290 4 190 5 800 7 530 9 370 2 400 3 640 5 070 6 560 7 870 2 670 3 690 4 760 5 770 7 580 MPa 33.5 41.1 50.6 63.2 76.1 30.7 42.6 56.0 73.1 31.4 41.4 50.2 64.7 76.8 29.8 46.8 61.1 72.2 21.9 33.0 44.4 54.7 63.5 71.6 22.7 28.9 40.0 51.9 64.6 16.6 25.1 35.0 45.2 54.3 18.4 25.5 32.8 39.8 52.2 "Design" of collapse presses NH C95 HC psi 5 340 6 650 8 390 10 690 13 000 4 870 6 920 9 390 12 460 4 980 6 710 8 310 10 960 13 110 4 710 7 680 10 320 12 310 3 440 5 250 7 240 9 140 10 750 12 190 3 560 4 570 6 460 8 620 10 950 2 580 3 950 5 590 7 390 9 060 2 880 4 010 5 220 6 420 8 690 MPa 36.8 45.9 57.8 73.7 89.6 33.6 47.7 64.7 85.9 34.3 46.3 57.3 75.6 90.4 32.5 52.9 71.2 84.9 23.7 36.2 49.9 63.0 74.1 84.1 24.5 31.5 44.5 59.5 75.5 17.8 27.2 38.5 51.0 62.5 19.9 27.6 36.0 44.3 59.9 NH P110 HC psi 5 490 6 960 9 050 11 970 14 820 4 980 7 260 10 310 14 160 5 100 7 020 8 940 12 310 14 960 4 820 8 170 11 500 13 980 3 480 5 390 7 650 9 990 12 050 13 840 3 610 4 670 6 730 9 340 12 290 2 610 4 010 5 760 7 830 9 890 2 910 4 070 5 370 6 690 9 420 MPa 37.9 48.0 62.4 82.5 102.2 34.3 50.1 71.1 97.6 35.2 48.4 61.7 84.9 103.1 33.2 56.4 79.3 96.4 24.0 37.2 52.7 68.9 83.1 95.4 24.9 32.2 46.4 64.4 84.8 18.0 27.7 39.7 54.0 68.2 20.1 28.1 37.0 46.1 65.0

Note: psi x 0.006894757 = MPa

Tubing according to API Spec 5CT (7th edition, 2001) Dimensional range, weight, grade

Outside diameter in 1.900 2 2 3 /8 mm 48.26 60.32 Wall thickness in 0.145 0.200 0.167 0.190 0.190 2 7 /8 3 /2

1

mm 3.68 5.08 4.24 4.83 4.83 5.51 5.51 5.49 6.45 6.45 7.34 9.52 9.52 5.74 6.65 8.38 10.54 6.88 6.88

Nominal weight of threaded pipe with coupling lb/ft kg/m 2.75 4.09 3.65 4.00 4.60 4.70 6.40 6.50 7.70 9.20 9.30 10.20 12.70 12.95 9.50 11.00 13.20 16.10 12.60 12.75

1 1 1 1 1 1 1 1 1 1

Max. length range 2 2 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3 2 2, 3 2, 3

Grade J J J J J J, N3, P, L J, N3, L J, N , L J, N3, L, P J, N3, L J, N , L N3, L, P N,L J, N3, L J, N3, L L4 L

4 3 3 3

End finish non upset external upset non upset non upset external upset non upset external upset non upset non upset external upset non upset non upset external upset non upset external upset non upset non upset non upset external upset

5.43 5.95 6.85 6.99 9.52 9.67 11.46 13.69 13.84 15.18 18.90 19.27 14.14 16.37 19.64 23.96 18.75 18.97

73.02 88.90

0.217 0.217 0.216 0.254 0.254 0.289 0.375 0.375

4

101.60

2

0.226 0.262 0.330 0.415

4 1 /2

1

114.30

0.271 0.271

J, N3, L J, N3, L

The pipes can also be supplied with a gastight connection with prior agreement 2 Supplied with prior agreement only. 3 It is supplied as the grade N80-1 or N80-Q by producer option or by agreement with customer 4 Only plain-ends

Drill Pipe according to API Spec 5D, 5th edition, 2002 Dimensional range, weight, grade

Outside diameter in 2 3 /8 1 2 /8

7 1

Wall thickness in 0.280 0.362 0.254 0.368 0.449 0.330 0.337 0.430 0.362 0.500 mm 7.11 9.19 6.451 9.351 11.40 8.38 8.56 10.922 9.19 12.703

Weight of pipe lb/ft 6.65 10.40 9.50 13.30 15.50 14.00 16.60 20.00 19.50 25.60 kg/m 9.90 15.49 14.14 19.81 23.09 20.83 22.32 29.76 29.05 30.10

Max. length range 2 2 2 2 2 2 2 2 E, X, G

mm 60.3 73.0 88.9 101.6 114.3 127.0

Grade EU EU

End finish4

3 1 /2 4 4 1 /2 5

1

E, X, G E E, X, G E1, X2, G2 G G E, X, G

EU or IEU EU EU or IEU IEU

Only external upset ­ by prior agreement 2 Only external & internal upset ­ by prior agreement 3 Only grade G105 ­ by prior agreement 4 EU = External Upset, IEU = Internal & External Upset

Note: Drill pipes with weld-on tool joints according to API Spec 7 (38th edition, 1994) are supplied in outside diameters 3 ½" and 5" only.

Line Pipe according to API Spec 5L (43rd edition, 2004) Dimensional range, weight, grade

Nominal size in

1

Size NPS (ASTM) in

1

Outside diameter in 0.840 1.050 1.315 1.660 1.900 2. 375 mm 21.3 26.7 33.4 42.2 48.3 60.3 in 0.109 0.147 0.113 0.154 0.133 0.179 0.140 0.191 0.145 0.200 0.125 0.141 0.154 0.172 0.188 0.218 0.250 0.281

Wall thickness mm 2.80 3.70 2.90 3.9 3.4 4.5 3.6 4.9 3.7 5.1 3.2 3.6 3.9 4.4 4.8 5.5 6.4 7.1 3.2 3.6 4.0 4.4 4.8 5.2 5.5 6.4 7.0 3.2 3.6 4.0 4.4 4.8 5.5 6.4 7.1 7.6 3.6 4.0 4.4 4.8 5.7 6.4 7.1 8.1 mm (ASTM) 2.77 3.73 2.87 3.91 3.38 4.55 3.56 4.85 3.68 5.08 3.18 3.58 3.91 4.37 4.78 5.54 6.35 7.14 3.18 3.58 3.96 4.37 4.78 5.16 5.49 6.35 7.01 3.18 3.58 3.96 4.37 4.78 5.49 6.35 7.14 7.62 3.58 3.96 4.37 4.78 5.74 6.35 7.14 8.08

Schedule No. (equivalent ASTM) 40 80 40 80 40 80 40 80 40 80 ... ... 40 ... ... 80 ... ... ... ... ... ... ... 40 ... ... 80 ... ... ... ... ... 40 ... ... 80 ... ... ... ... 40 ... ... 80

Weight of plainend tube lb/ft 0.85 1.09 1.13 1.48 1.68 2.17 2.27 3.00 2.72 3.63 3.01 3.37 3.66 4.05 4.40 5.03 5.68 6.29 3.67 4.12 4.53 4.97 5.40 5.80 6.14 7.02 7.67 4.51 5.06 5.58 6.12 6.66 7.58 8.69 9.67 10.26 5.82 6.41 7.04 7.66 9.12 10.02 11.17 12.52 kg/m 1.28 1.61 1.70 2.19 2.52 3.21 3.43 4.51 4.07 5.43 4.51 5.03 5.42 6.07 6.57 7.43 8.51 9.31 5.51 6.16 6.81 7.44 8.07 8.69 9.16 10.51 11.39 6.76 7.57 8.37 9.17 9.95 11.31 13.02 14.32 15.24 8.70 9.63 10.55 11.46 13.48 15.02 16.55 18.68

Max. production length ft 31.17 31.17 31.17 31.17 31.17 31.17 31.17 31.17 31.17 31.17 29.53 32.81 37.73 37.73 37.73 37.73 37.73 37.73 37.73 37.73 37.73 37.73 37.73 39.37 39.37 39.37 39.37 39.37 39.37 39.37 39.37 39.37 41.01 39.37 39.37 39.37 37.73 39.37 39.37 39.37 39.37 39.37 39.37 39.37 m 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.0 10.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.5 12.0 12.0 12.0 11.5 12.0 12.0 12.0 12.0 12.0 12.0 12.0

/2 /4 1

/2 /4 1

3

3

1 /4 1 /2 2 /8

3 1

1

1 /4 1 /2 2

1

1

2 7 /8

2 1 /2

2.875

73.0

0.125 0.141 0.156 0.172 0.188 0.203 0.216 0.250 0.276

3 1 /2

3

3.500

88.9

0.125 0.141 0.156 0.172 0.188 0.216 0.250 0.281 0.300

4

3 1 /2

4.000

101.6

0.141 0.156 0.172 0.188 0.226 0.250 0.281 0.318

Line Pipe according to API Spec 5L (43rd edition, 2004) Dimensional range, weight, grade (continuation)

Nominal size in 4 /2

1

Size NPS (ASTM) in 4

Outside diameter in 4.500 mm 114.3 in

Wall thickness mm 3.6 4.0 4.4 4.8 5.2 5.6 6.0 6.4 7.1 7.9 8.6 11.1 4.0 4.8 5.6 6.6 7.1 7.9 8.7 9.5 12.7 4.8 5.2 5.6 6.4 7.1 7.9 8.7 9.5 11.0 12.7 14.3 15.9 18.3 6.4 7.0 7.9 8.2 8.7 9.5 11.1 12.7 14.3 15.9 18.3 6.41 7.1 7.8 8.7 9.3 11.1 12.7 14.3 15.9 18.3 mm (ASTM) 3.58 3.96 4.37 4.78 5.16 5.56 6.02 6.35 7.14 7.92 8.56 11.13 3.96 4.78 5.56 6.55 7.14 7.92 8.74 9.52 12.70 4.78 5.16 5.56 6.35 7.11 7.92 8.74 9.53 10.97 12.70 14.27 ­ 18.26 6.35 7.04 7.92 8.18 8.74 9.53 11.13 12.70 14.27 ­ 18.26 6.351 7.09 7.80 8.74 9.27 11.13 12.70 ­ ­ 18.26

Schedule No. (equivalent ASTM) ... ... ... ... ... ... 40 ... ... ... 80 120 ... ... ... 40 ... ... ... 80 120 ... ... ... ... 40 ... ... ... 80 ... 120 ... 160 20 30 ... 40 ... ... ... 80 ... ... 120 20 ... 30 ... 40 ... 60 ... ... 100

Weight of plainend tube lb/ft 6.57 7.24 7.96 8.67 9.32 10.02 10.80 11.36 12.67 13.97 15.00 19.02 9.02 10.80 12.51 14.63 15.87 17.51 19.19 20.80 27.06 12.94 13.94 15.00 17.04 18.99 21.06 23.10 25.05 28.60 32.74 36.43 40.09 45.39 22.38 24.72 27.73 28.58 30.45 33.07 38.33 43.43 48.44 53.45 60.77 28.06 31.23 34.27 38.27 40.52 48.28 54.79 61.21 67.65 77.10 kg/m 9.83 10.88 11.92 12.96 13.99 15.01 16.02 17.03 18.77 20.73 22.42 28.25 13.54 16.16 18.74 21.92 23.50 25.99 28.45 30.88 40.28 19.35 20.91 22.47 25.55 28.22 31.25 34.24 37.20 42.67 48.73 54.31 59.76 67.69 33.57 36.61 41.14 42.65 45.14 49.10 56.94 64.64 72.22 79.67 90.62 42.09 46.57 51.03 56.72 60.50 71.72 81.55 91.26 100.85 114.99

Max. production length ft 37.73 37.73 37.73 37.73 37.73 39.37 37.73 39.37 39.37 39.37 39.37 36.08 36.08 39.37 39.37 39.37 39.37 37.73 37.73 36.08 36.09 39.37 39.37 39.37 39.37 39.37 39.37 39.37 39.37 39.37 39.37 32.80 29.53 26.25 39.37 39.37 39.37 39.37 39.37 39.37 39.37 39.37 37.73 34.45 31.17 39.37 39.37 39.37 39.37 39.37 39.37 36.09 31.17 26.25 23.95 m 11.5 11.5 11.5 11.5 11.5 12.0 12.5 12.0 12.0 12.0 12.0 11.0 11.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 11.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 10.0 9.0 8.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 11.5 10.5 9.0 12.0 12.0 12.0 12.0 12.0 12.0 10.5 9.0 8.0 7.0

5 9/16

5

5.563

141.3

6 5 /8

6

6.63

168.3

8 5 /8

8

8.63

219.1

10 3/4

10

10.75

273

0.141 0.156 0.172 0.188 0.203 0.219 0.237 0.250 0.281 0.312 0.337 0.438 0.156 0.188 0.219 0.258 0.281 0.312 0.344 0.375 0.500 0.188 0.203 0.219 0.250 0.280 0.312 0.344 0.375 0.432 0.500 0.562 0.625 0.719 0.250 0.277 0.312 0.322 0.344 0.375 0.438 0.500 0.562 0.625 0.719 0.2501 0.279 0.307 0.344 0.365 0.438 0.500 0.562 0.625 0.719

Finishing of ends, threads, couplings

Casing: Supplied with threaded ends and galvanized or phosphated couplings. The threads are: short round, long round, buttress, gastight connection HSC see relevant schedule for Casing, column "Type of thread". H grade pipes supplied only with short round thread. Tubes according to API Spec 5CT, the last release are supplied with long round or buttress thread. The supply of casing with gastight connection shall be negotiated beforehand. Tubing: Supplied with round threads and galvanized or phosphated couplings possibly with "Teflon" rings. Threads on pipes and couplings are protected against damage during transport or manipulation. In bulk couplings ­ 1.9" ÷ 10 ¾" according to API Spec 5CT, last release. In bulk couplings ­ 2 3/8" ÷ 10 ¾" according to HSC in all offered grades. Pup Joints: Supplied according to API Spec 5CT, latest release, quantity with prior agreement. Reducing pieces with different diameters 1.9" ÷ 10 ¾" and type of thread is necessary discuss before. Tube end finishing (machining operation) outside & inside according to customer documentation ­ up to O.D. 5 ½" and up to 250 mm from end of tube; for tubes over 5 ½" to O.D. 10 ¾" up to 400 mm from end of tube. Drill pipe: Supplied with upset ends and weld-on tool joints. The dimensions and type of weld-on tool joints shall be agreed beforehand and the specification should be included in the order form. Any other type of end finishing may also be negotiated with the producer beforehand. Line Pipe: Supplied with plain-ends. External and internal end edges are de-burred. Pipes of an outside diameter up to Ø1.900" (Ø48.3 mm) are supplied with ends cut off perpendicularly to the pipe axis. Pipes of an outside diameter of Ø2 3/8" (Ø60.3 mm) and over are supplied either with perpendicularly cut off ends or with beveled ends at an angle of 30o +5o ­0o (API Spec 5L + ASTM A 106 bevel), beveled ends can also be supplied according to other standards like ASME B16.25 with prior agreement.

Lengths

Casing: Range 2 Range 3 Tubing: Range 1 Range 2 Range 3 Drill Pipe: Range 11 Range 2 Line Pipe2: Ø < 60.3 mm: A) "nominal length" 6 m (20 ft) B) possible other lengths by agreement Ø 60.3 mm: A) "nominal length" 6 m (20 ft) B) "nominal length" 12 m (40 ft) C) possible other lengths by agreement 6.0 ­ 12.5 m, with average length in supply min. 10.67 m 5.0 ­ 6.86 m, with average length in supply min. 5.23 m 18 ­ 22 ft 27 ­ 30 ft 5.49 ­ 6.70 m 8.23 ­ 9.14 m 20 ­ 24 ft 28 ­ 32 ft 38 ­ 42 ft 6.10 ­ 7.32 m 8.53 ­ 9.75 m 11.58 ­ 12.80 m 25 ­ 34 ft 34 ft and over 7.62 ­ 10.36 m 10.36 m and over

Unless otherwise stipulated in the order form, pipes are supplied with an external short-term anticorrosive surface finishing. By agreement is possible the tubes to supply with outside PE coating acc. to DIN 30670:1991 (Ø 60.3 mm in lengths > 8 m, Ø 168.3 mm in lengths > 6 m).

Surface protection

Bundling

The tubes are supplied also in hexagonal packs.

1 2

Supplied with prior agreement only. Whole size range of the Line Pipe is possible to supply also at exact lengths ­ tolerance min. +100/-0 mm (±50 mm).

Spiral weld pipes

Dimensional standards

EN 10220:2002 ISO 4200:1989 CSN 42 5738:1979 DIN 2458:1981 EN 10219-2:1997 API Spec 5L:2004 GOST 8696:1974 PN 79/H-74244:1979 "Seamless and welded steel tubes - General tables of dimensions and masses per unit length" "Plain-end steel tubes, welded and seamless" "Spiral weld steel pipes" "Welded steel tubes" "Cold formed welded structural hollow sections of non-alloy and fine grain steels" "Specification for Line Pipe" "Electrically welded steel pipes with spiral seam" "Welded steel pipes for transportation of media"

Technical supply regulations

CSN 42 0144:1979 DIN 1615:1984 DIN 1626:1984 CSN EN 10208-1:2000 CSN EN 10208-2:1999 DIN 17120:1984 DIN 17172:1978 DIN 1628:1984 EN 10217-1:2002 EN 10219-1:1997 API Spec 5L:2004 GOST 8696:1974 PN 79/H-74244:1979 "Spiral weld steel" "Welded circular tubes of non-alloy steels without special quality requirements" "Welded circular tubes of non-alloy steels with special quality requirements" "Steel tubes for pipeline for combustible liquids" ­ part 1: Requirements according to class A "Steel tubes for pipeline for combustible liquids" ­ part 2: Requirements according to class B "Welded circular tubes of non-alloy steels for steel constructions" "Steel tubes for pipeline for transport of combustible liquids and gases" "Welded circular tubes of non-alloy steels with very high quality requirements" "Welded steel pipes for pressure purposes" "Cold formed welded structural hollow sections of non-alloy and fine grain steels" "Specification for Line Pipe" "Electrically welded steel pipes with spiral seam" "Welded steel pipes for transportation of media"

Dimensional range, weight according to EN 10220:2002, (ISO 4200:1989), EN 10208:1996

Outside diameter mm 323.9 355.6 406.4 457 508 (559) 610 (660) 711 762 813

1

5 39.3 43.2 49.5 55.7 62.0

5.4 42.4 46.6 53.4 60.1 66.9 73.7

5.6 44.0 48.3 55.4 62.3 69.4 76.4

6.3 49.3 54.3 62.2 70.0 77.9 85.9 93.8

Wall thickness (mm) 7.1 8 Weight (kg/m) 55.5 61.0 69.9 78.8 87.7 94.6 106 114 123 62.3 68.4 78.6 88.6 98.6 109 119 129 139 149

8.8

10

11

1

12.51, 2

86.3 97.3 108 119 130 141 152 163 175

97.8 110 123 135 148 160 173 185 198

107 121 135 149 162 176 190 204 218

121 137 153 169 184 200 215 231 247

Supplied by prior agreement 2 Size is not standardized

Dimensional range, weight according to CSN 42 5738:1979 and PN 79/H-4244:1979

Outside diameter mm 324 377 426 530 630 720 820

1

5 40.1 46.8 52.9 65.9

6 48.0 56.0 63.3 79.0 94.1

7 55.0 65.1 73.7 92.1 109.6 125.4

Wall thickness (mm) 8 9 Weight (kg/m) 63.5 74.2 84.0 105.0 125.1 143.1 94.3 117.8 140.5 160.8 183.4

10

11

12

104.5 130.7 155.8 178.4 203.5

114.7 143.5 171.1 196.0 223.7

124.8 156.2 186.4 213.5 243.7

Supplied by prior agreement

Dimensional range, weight according to DIN 2458:1981

Outside diameter mm 323.9 355.6 406.4 457 508 (559) 610 (660) 711 762 813

Supplied by prior agreement By agreement also unnormalized diameters 368, 419.1, 462 and 521 mm

1

5.6 44.0 48.3 55.4 62.3 69.4 76.4

6.3 49.3 54.3 62.2 70.0 77.9 85.9 93.8

7.1 55.5 61.0 69.9 78.8 87.7 94.6 106 114 123

Wall thickness (mm) 8 8.8 Weight (kg/m) 62.3 68.4 78.6 88.6 98.6 109 119 129 139 149 86.3 97.3 108 119 130 141 152 163 175

10

11

12.5

97.8 110 123 135 148 160 173 185 198

107 121 135 149 162 176 190 204 218

121 137 153 169 184 200 215 231 247

Dimensional range, weight according to API Spec 5L (43rd release, 2004)

Outside diameter in

12 ¾ 14 16 18 20 22 24 26 28 30 32

1

Wall thickness (in/mm)

0.219/5.6 29.31/43.96 32.23/48.33 36.91/55.35 41.59/62.34 46.27/69.38 0.250/6.4 33.38/50.11 36.71/55.11 42.05/63.13 47.39/71.12 52.73/79.16 58.07/87.21 63.41/95.26 0.281/7.1 37.42/55.47 41.17/61.02 47.17/69.91 53.18/78.77 59.18/87.70 65.18/96.63 71.18/105.56 77.18/114.31 83.19/123.24 0.312/7.9 41.45/61.56 45.61/67.74 52.27/77.63 58.94/87.49 65.60/97.43 72.27/107.36 78.93/117.30 85.60/127.04 50.17/85.32 64.87/96.18 72.21/107.12 79.56/118.06 86.91/129.00 54.57/92.96 70.59/104.84 78.60/116.78 86.61/128.73 67.62/100.63 76.29/113.53 84.96/123.41 72.80/108.20 82.15/122.05 91.51/136.01 97.83/145.58 0.344/8.7

­1

0.375/9.5

­1

0.406/10.3

0.438/11.1 1

0.469/11.9 1

mm

323.9 355.6 406.4 457 508 559 610 660 711 762.1 813.1

Weight (lb.ft / kg.m )

93.63/139.37 100.86/149.97 107.85/160.55

94.62/140.68 102.31/152.32 110.22/163.93 117.86/175.40

94.26/139.73 102.63/152.39 110.98/165.02 119.57/177.62 127.88/190.19

92.26/136.97 101.61/150.67 110.64/164.34 119.65/177.98 128.93/191.58 137.90/205.15 98.93/147.37 108.95/162.31 118.65/176.76 128.32/191.17 138.29/206.01 147.92/220.36 116.30/173.26 126.66/188.69 136.99/204.09 147.64/219.95 157.94/235.29

Supplied by prior agreement

Dimensional range, weight according to GOST 8696:1974

Outside diameter mm 325 377 426 480.1 530 630 720 820

1

6.0 47.91 55.71 63.08 71.18 78.69

7.0

8.0

Wall thickness (mm) 9.0 Weight (kg/m)

10.0

11.0 1

12.0

1

73.41 82.87 91.63 109.1 124.9

83.70 94.51 104.5 124.5 142.6 117.4 139.9 160.2 182.7 155.2 177.7 202.7 195.2 222.7 212.6 242.7 Spiral weld pipes

Supplied by prior agreement

Steel grades

CSN 42 5738:1979 DIN 1615:1984 (1626, 1628) CSN EN 10208-1:2000 CSN EN 10208-2:1999 EN 10217-1:2002 EN 10219-1:1997 CSN EN 10025:1990 + appendix A1:1993 DIN 17120:1984 DIN 17172:1972 API Spec 5L:2000 GOST 8696:1974 PN 79/H-74244:1979 11 375, 11 378, 11 425, 11 523 St 33 (St 37.0, St 37.4, St 44.0, St 44.4, St 52.0, St 52.4) L210GA, L235GA, L245GA, L290GA, L360GA L245NB, L245MB, L290NB, L360NB, L290MB, L360MB, L415MB P195TR1, P235TR1, P265TR1, P195TR2, P235TR2, P265TR2 S235JRH, S275JOH, S275J2H, S355JOH, S355J2H S235JR, S235JRG2, S235JRG3, S275JR, S275J2G3, S355J2G3 RSt 37-2, RSt 37-3, RSt 44-2, RSt 44-3, St 52-3 StE 290.7, StE 360.7, StE 290.7 TM, StE 320.7 TM, StE 360.7 TM, StE 385.7 TM, StE 415.7 TM A-PSL1, B-PSL1, B-PSL2, X42-PSL1, X42-PSL2, X46-PSL1, X46-PSL2, X52-PSL1, X52-PSL2, X56-PSL1, X56-PSL2, X60-PSL1, X60-PSL2 VSt 3 sp G235, G295, G355

Lengths

The pipes are supplied in lengths 8 ÷ 12.3 m for wagon transport, in lengths 8 ÷ 13.5 m for truck transport, in fixed lengths (for example: 12 m ±500 mm or in exact lengths with tolerance +50/-0 mm (by agreement +25/-0 mm). On special demand the min. pipe length 6 m or max. length 18 m is available. Tubes with water test requirement in lengths 8 m are manufactured in double lengths and after the water testing are cutted, i.e. one of the ends is beveled and second one is square cutted.

Finishing of ends

a) Ends are cut by flame perpendicularly with lengths tolerance +50/-0 mm b) Ends are cut off perpendicularly c) beveled ends for welding according to relevant standards (for example DIN 2559/22)

Socket pipes

The tubes are delivered according to DIN 2460 with outside polyethylene coating according to DIN 30 670-N-n and internal protection (cement mortar) according to DIN 2614. At the point of connection it is possible to carry out surface coating for pipe ends finishing ­ for example by thermally shrinking collar on the outside surface, the connection does not require additional tube internal surface treatment.

Cement Mortar

Steel tube

The tubes are manufactured and tested according to DIN 2458/DIN 1626. Depth of Outside Wall Weight Nominal overlapping diameter thickness per meter bore of pipe t of tube DN (mm) (mm) (kg/m) (mm) 300 323.9 5.6 44.0 105 350 355.6 5.6 48.3 115 400 406.4 5.6 55.4 120 500 508 5.6 69.4 130 600 610 6.3 93.8 130 700 711 6.3 109 130 800 813 7.1 141 130

Clearance of connection f (mm) 2 2.5 2.5 3 3 3 3

Nominal pipeline pressure PN (acc. to used steel) St 37.0 32 32 32 25 25 20 20 St 52.0 50 40 40 40 32 32 32

Surface protection

The pipes are supplied with a natural black surface or with the following types of the anticorrosive protection: The adjustment can be delivered in all combination of outside and inside kind of surface including of surface without protection. Tube diameter (mm) Outside insulation Extruded polyethylene coating with normal and reinforced thickness (DIN 30670:1991 ­ N-n, N-v, S-n, S-v)2 Concrete-plastic coating according to KN 42 0025:2003, event. FZM-N normal, FZM-S special (for protection of tube with PE coating) 323.9 ­ 820 Reinforced bitumen protection with one or two layers of fiber glass and polyvinyl chloride tape according to KN 42 0023:1994 or CSN 42 0022:1977 Bitumen protection varnish ALIT or alternatively others

1 2 3

Color modification of outside coating cerná zlutá3 modrá3 pírodní zlutá3 modrá3

Inside insulation

Lengths

Producer of insulation

6 ­ 18 m

Mittal Steel Ostrava a.s.

6 ­ 14 m Cement Mortar Lining thickness 5 ­ 13 mm (DIN 2614:1990 ­ II-N)1

Mittal Steel Ostrava a.s.

6 ­ 13 m

Mittal Steel Ostrava a.s.

6 ­ 18 m

Mittal Steel Ostrava a.s.

6 ­ 18 m

Mittal Steel Ostrava a.s.

This kind of insulation is delivered out of winter period (it is approx. from 1st of April to 31st of November in current year). Wall thicknesses > 12 mm according to particular O.D. only by agreement. By prior agreement.

Tubular products

Traction line poles

Are produced from two seamless tubes of different diameters and lengths connected with welding according to technical delivery conditions: "Traction line poles" ­ TP NH 129/96 or with more strict conditions TP NH 173/99TP1. T ­ Poles are produced from materials ­ see chart below.

Dimensions and weights

T ­ Poles diameter 168 mm T ­ Poles diameter 219 mm T ­ Poles diameter 245 mm see TP NH 173/99 Annex A see TP NH 173/99 Annex B see TP NH 173/99 Annex C

Steel grades

Strength group Group 1 Re 245 MPa Group 2 Re 275 MPa Group 3 Re 355 MPa CSN 11 353.0 (.1) 11 369.1 12 021.1 11 453.0 (.1) 12 022.1 11 523.0 (.1) Steel notation according to standards DIN EN NFA St 37.0 TUE 220 A S235JRH RSt 37-2, St 37-3, St 34.4 TUE 235 A, B L245NB St 35.8 TUE 250 B St 44.0, St 44.4 S275J0H TUE 275 B St 44-2, St 44-3 S275J2H St 45.8 St 52.0, St 52.4 S355J0H St 52-3 S355J2H GOST St 4 20 St 5 09G2S API + ASTM B Gr. 6 H 40 X 42 X 46 X 52

1

The assortment may be ordered only by prior agreement.

Technical specifications of T ­ pole, diameter 168 mm

Min. weight [kg] Length of upper part [mm] W.t. of upper part [mm] Diameter of tube, upper part [mm] Length of lower part [mm] W.t. of lower part [mm] Diameter of tube, Total length L [mm] lower part [mm]

Type of pole

Max. deflection [mm]

Tension at top (peak) [N]

T 168/8 3 000 152 5 000 168

2381 2592 3183 2681 2482 1923 3 000 152 5 500 168 2481 2272 1803 3 500 152 5 500 2641 2412 1913 3 500 152 6 000 2381 2222 2003 4 000 152 6 000 2521 2352 1953 4 000 152 6 500 2621 2442 2033 4 500 152 2481 2382 2143 4 500 152 2571 2392 2083 5 000 2691 2492 2173 5 000 2781 2412 2263 5 500 2901 2502 2343 5 500 3081 2582 2423 6 000 min. 4.51 min. 4.52 min. 4.53 min. 4.51 min. 4.52 min. 4.53 min. 51 min. 4.52 min. 4.53 min. 4.51 min. 4.52 min. 4.53 min. 4.51 min. 4.52 min. 4.53 152 min. 4.51 min. 52 min. 4.53 min. 51 min. 52 min. 4.53 6 500 min. 51 min. 52 min. 4.53 min. 51 min. 52 min. 4.53 min. 71 min. 6.32 min. 5.63 min. 71 min. 6.32 min. 53 min. 71 min. 6.32 min. 53 7 000 min. 6.31 min. 5.62 min. 53 7 000 min. 6.31 min. 5.62 min. 4.53 152 7 500 min. 6.31 min. 5.62 min. 4.53 152 7 500 min. 6.31 min. 5.62 min. 4.53 152 8 000 min. 6.31 min. 52 min. 4.53 152 8 000 min. 6.31 min. 52 min. 4.53 min. 61 min. 62 min. 4.53 min. 81 min. 72 min. 5.63 min. 61 min. 62 min. 4.53 min. 81 min. 72 min. 5.63 168 min. 71 min. 72 min. 53 min. 91 min. 82 min. 6.33

61201 60742 58163

2501 2322 1803

min. 71 min. 72 min. 53

min. 91 min. 82 min. 6.33

8 000

T 168/8.5

2591 2822 3463

56531 55982 53233

8 500

T 168/9

3101 3412 4133

50181 49662 47363

9 000

T 168/9.5

3371 3712 4483

47271 46882 44233

168

9 500

T 168/10

4081 4392 4843

42301 41902 40903

168

10 000

T 168/10.5

4431 4772 5723

40551 40102 38633

168

10 500

T 168/11

4831 5182 6183

38381 37952 36463

168

11 000

T 168/11.5

5641 6072 6653

35981 36152 35043

168

11 500

T 168/12

6141 6652 7783

34501 34022 33283

168

12 000

T 168/12.5

6651 7202 8423

33841 33302 32443

168

12 500

T 168/13

7221 7652 9073

32751 31792 31423

168

13 000

T 168/13.5

7821 9122 9833

32441 31382 30963

168

13 500

T 168/14

8411 9862 10163

32611 30702 30313

168

14 000

1

2

3

Tension of top is calculated for minimum sizes of tubes and value of flexural moment at stuck according to SÚ DOP Praha strength group Re 245 MPa strength group Re 275 MPa 4 strength group Re 355 Mpa

Tubular products

Technical specifications of T ­ pole, diameter 219 mm

Min. weight [kg] Length of upper part [mm] W.t. of upper part [mm] Diameter of tube, upper part [mm] Length of lower part [mm] W.t. of lower part [mm] Diameter of tube, Total length L [mm] lower part [mm]

Type of pole

Max. deflection [mm]

Tension at top (peak) [N]

T 219/8 3 000 168 5 000 219

1891 2052 2443 4151 3772 3033 3 000 168 5 500 219 3921 3532 2883 3 500 168 5 500 3901 3462 3073 3 500 168 6 000 3901 3602 2783 4 000 168 6 000 3801 3382 2943 4 000 168 6 500 3941 3502 2953 4 500 168 4031 3672 3123 4 500 168 3811 3552 3213 5 000 3991 3732 3383 5 000 4111 3852 3473 5 500 4301 4012 3633 5 500 4421 4142 3713 6 000 min. 6.31 min. 6.32 min. 4.53 min. 6.31 min. 6.32 min. 4.53 min. 6.31 min. 6.32 min. 4.53 min. 6.31 min. 6.32 min. 4.53 min. 6.31 min. 6.32 min. 4.53 168 min. 6.31 min. 6.32 min. 4.53 min. 71 min. 6.32 min. 4.53 6 500 min. 71 min. 6.32 min. 53 min. 71 min. 72 min. 53 min. 81 min. 72 min. 6.33 min. 91 min. 82 min. 73 min. 91 min. 82 min. 6.33 min. 81 min. 72 min. 6.33 min. 81 min. 72 min. 6.33 7 000 min. 81 min. 72 min. 6.33 7 000 min. 71 min. 6.32 min. 6.33 168 7 500 min. 71 min. 6.32 min. 6.33 168 7 500 min. 71 min. 6.32 min. 6.33 168 8 000 min. 71 min. 6.32 min. 6.33 168 8 000 min. 71 min. 6.32 min. 6.33 min. 81 min. 72 min. 6.33 min. 101 min. 92 min. 73 219 min. 91 min. 82 min. 6.33v min. 111 min. 102 min. 83

120701 119142 116933

3871 3512 2903

min. 91 min. 82 min. 73

min. 111 min. 102 min. 83

8 000

T 219/8.5

2051 2222 2683

111291 109602 106453

8 500

T 219/9

2391 2622 3173

96981 95182 93003

9 000

T 219/9.5

2781 3072 3423

90431 88502 86893

219

9 500

T 219/10

3041 3292 4083

80761 80002 76103

219

10 000

T 219/10.5

3541 3932 4373

76141 74372 72023

219

10 500

T 219/11

3871 4302 4883

71531 69702 66463

219

11 000

T 219/11.5

4141 4532 5113

66931 66002 62653

219

11 500

T 219/12

4841 5192 5493

61761 61122 58193

219

12 000

T 219/12.5

5201 5582 5863

60161 59462 56493

219

12 500

T 219/13

5581 5962 6313

57171 56492 53283

219

13 000

T 219/13.5

5981 6402 6733

56221 55462 52213

219

13 500

T 219/14

6431 6832 7263

54091 53372 49873

219

14 000

1

2

3

Tension of top is calculated for minimum sizes of tubes and value of flexural moment at stuck according to SÚ DOP Praha strength group Re 245 MPa strength group Re 275 MPa 4 strength group Re 355 MPa

Technical specifications of T ­ pole, diameter 245 mm

Min. weight [kg] Length of upper part [mm] W.t. of upper part [mm] Diameter of tube, upper part [mm] Length of lower part [mm] W.t. of lower part [mm] Diameter of tube, Total length L [mm] lower part [mm]

Type of pole

Max. deflection [mm]

Tension at top (peak) [N]

T 245/8 3 000 219 5 000 245

1571 1722 2083 5461 4712 3963 3 000 219 5 500 245 5721 4452 4143 3 500 219 5 500 5421 4732 3953 3 500 219 6 000 5311 4442 4113 4 000 219 6 000 5601 4712 3983 4 000 219 6 500 5611 4512 4143 4 500 219 5511 4742 4353 4 500 219 5471 4912 4233 5 000 5731 5142 4423 5 000 5301 4872 4583 5 500 5531 5082 4763 5 500 5701 5242 4933 6 000 min. 6.31 min. 6.32 min. 6.33 min. 6.31 min. 6.32 min. 6.33 min. 6.31 min. 6.32 min. 6.33 min. 71 min. 6.32 min. 6.33 min. 71 min. 6.32 min. 6.33 219 min. 81 min. 6.32 min. 6.33 min. 81 min. 6.32 min. 6.33 6 500 min. 91 min. 6.32 min. 6.33 min. 91 min. 6.32 min. 6.33 min. 101 min. 92 min. 83 min. 101 min. 92 min. 73 min. 101 min. 82 min. 73 7 000 min. 91 min. 82 min. 73 7 000 min. 91 min. 82 min. 6.33 219 7 500 min. 91 min. 82 min. 6.33 219 7 500 min. 81 min. 72 min. 6.33 219 8 000 min. 81 min. 72 min. 6.33 219 8 000 min. 81 min. 72 min. 6.33 min. 91 min. 72 min. 6.33 min. 111 min. 102 min. 83 min. 101 min. 72 min. 73 min. 12.51 min. 102 min. 93 245 min. 101 min. 82 min. 73 min. 12.51 min. 112 min. 93

182751 180482 176203

5511 4962 3983

min. 101 min. 92 min. 73

min. 141 min. 12.52 min. 103

8 000

T 245/8.5

1841 2312 2423

164971 161172 158223

8 500

T 245/9

1981 2412 2603

148121 141762 141023

9 000

T 245/9.5

2351 2582 3083

134831 130932 128073

245

9 500

T 245/10

2701 3032 3303

122821 117392 116553

245

10 000

T 245/10.5

2891 3222 3903

115551 109932 107993

245

10 500

T 245/11

3131 3762 4153

106031 100952 100023

245

11 000

T 245/11.5

3601 4012 4433

100241 95902 94863

245

11 500

T 245/12

3901 4282 5103

92641 90162 88453

245

12 000

T 245/12.5

4161 4572 5453

89381 86762 84833

245

12 500

T 245/13

4881 5362 5793

82651 81572 80813

245

13 000

T 245/13.5

5201 5712 6173

80351 79152 78313

245

13 500

T 245/14

5561 6092 6563

77391 76232 75423

245

14 000

1

2

3

Tension of top is calculated for minimum sizes of tubes and value of flexural moment at stuck according to SÚ DOP Praha strength group Re 245 MPa strength group Re 275 MPa 4 strength group Re 355 MPa

Bent tubular products Dimensions and material

Tube Plant carries out the bending of tubes and pipes in the following range of materials and size according to customer's requirements: Tube/pipe diameter: Wall thickness: Material: Ø22 mm ÷ Ø127 (Ø133)1 mm 3.5 mm ÷ 8 mm in accordance with DIN from St 35 to St 52

1

Only for bent radius 9 000 mm and larger.

Mittal Steel Ostrava a.s. Vratimovská 689 707 02 Ostrava-Kunèice Czech Republic Phone: exchange direct dialling

+420 595 681 111 +420 595 682 502 +420 595 682 260 +420 595 682 915 +420 595 687 045 [email protected] www.mittalsteelostrava.com

Fax:

E-mail: Internet:

NOVÁ HU EXPORT, a.s. Biskupský dvùr 7 110 00 Praha 1 Czech Republic Phone: Fax: E-mail: +420 221 703 104 +420 222 320 994 [email protected]

© Mittal Steel Ostrava a.s. Marketing April 2005

Information

Trubky2005-1new.cdr

40 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

642157


Notice: fwrite(): send of 193 bytes failed with errno=104 Connection reset by peer in /home/readbag.com/web/sphinxapi.php on line 531