Read PARTSCATAUGO6 text version

TM

ASP PARTS CATALOGUE SEPTEMBER 2006

ROTARY SLASHER BLADES TURF CARE PARTS GROUNDS MAINTENANCE PARTS SAFETY ACCESSORIES ABRASIVES

ROTARY MOWER BLADES ROTARY HOE BLADES CULTIVATION PARTS MULCHING FLAILS & HAMMERS FASTENERS & BELTS

1

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

Grasscare & Flail Mower Replacement Parts

MANUFACTURER

PAGE

MANUFACTURER

Shibaura Sicma Sitrex Snapper Superior / Page Toro Tri-Max Turner Universal Van Vuuren Victa Viking Walker Waratah Western Fewing PRODUCTS

PAGE

22 22 22 22 22-25 26-27 27 5 27 31 28 28 28 29 29

Agricom 2, 3 & 22 Agrifarm 2 Agrimaster 2 Alamo 2 Atom 2 Berends 2-3 Berti 3 Bomford 3 Cabe 22 Celli 43 Chris Grow 4 Cox 4 Cub Cadet 4 Daken 4 Deutscher 4 Dixon 5 Exmark 5 Falc 5 Feraboli 5 Ferri 5 Ferris 5 Ford New Holland 6 Gessner 6 Gianni Ferrari 6 Grass Hopper 6 Great Dane 7 Honda 8 Howard 8-10 & 43 Husqvarna 10 Hustler 11 Iseki 11 Jacobsen 12 Jarrett 12 John Deere 13-15 Kanga 15 Krone 15 Kubota 15-16 Loxton 17 McCulloch 17 McConnel 17 McLeod / MF 17-18 Maletti 17 Maschio 18 & 43 M.E.A.A.T. 2 Mott 19 MTD 19 Murray 19 Nobili 19-20 Ormarv 19-20 Page (see Superior / Page) Pegoraro 20 Perugini 20 Ransome 20 Rover 20 Ryan 31 Saliba 21 Sammut 21 Scag 21 Schmidt 5 Scott-Bonner 21 Seppi 22

Contents

Replacement Grasscare parts are listed by individual manufacturer unless the page number is shown below. Rotary Mower Wear Parts Blades, Fasteners, Belts Rotary Slasher Wear Parts Blades Bushes Quick Reference 29 Fasteners & Beams Rotary Hoe blades Finishing Mower Parts Blades & Fasteners Flail Mower Parts Blades Flails Quick Reference Mulcher Parts Blades & Flails Turf Care Parts Blades & Belts Finishing Mower Parts Grounds Maintenance Parts Trimmer Line Trimmer Heads Edger Blades Agricultural Cultivation Parts Discs & Coulters Tines, Shanks & Points Clamps & Wedges U Bolts Row Crop tools Rotary Hoe blades Safety Accessories Abrasives 31 43

30

32 32-33 33

35-39 40-42 41 40 40-43 43 44 45

VISIT OUR ONLINE CATALOGUE AT www.asproducts.com.au

All parts listed are supplied to fit machines indicated and are not sold as genuine parts Please use product numbers in bold type when ordering

PARTS (By Individual Manufacturers)

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

2

Agrifarm & M.E.A.A.T.

BS-06943 Mulcher Double edge Y FLAIL

Agrifarm & M.E.A.A.T.

BS-279003 Straight Double edge

FLAIL

W 65

T 10

L 171

H 25.5

W 60

T 10

L 171

H 25.5

Agrifarm & M.E.A.A.T.

Agrifarm

BSA-30444 Pivot Assembly

BS-279005

FLAIL 900 BS-30151 Double edge H 25.5 W 50 T 5 BLADE TIP

Double edge Overall length 204 mm

W 60

T 10

L 171

L 110

H 18

Agrifarm Beams

Agrimaster

BS-08490 BS-08491

Y FLAIL SUITS MKD200/230/250/280 FLAT FLAIL SUITS MKD200/230/250/280 Overall length 145 mm

BSA-08038 (770 x 90 x 8 mm) Suit 180 - 360 models BSA-08039 (1029 x 100 x 8 mm) Suit 235 model

W 60

T 8

L 115

H 26

Agrimaster & Agricom

CI-11/20 FLAIL

(OEM:3001119) FA200

Alamo & Cabe

BM-100759 BM-100759HD FLAIL 3 mm FLAIL 5 mm

Height 65 mm Width 45 mm Hole 13 x 27

Hole Radius Cutting face Knuckle

20.5 mm 90 mm 150 mm 55 mm

Height 65 mm Width 40 mm Hole 14 x 26 Overall length 88 mm

BM-100761 BMA-102670 BMA-00026

SHACKLE PIN 11 mm SPLIT PINS

Atom Edger

BM-43105 (Genuine) Atom Edger Blade 2 Piece Cross Cut 270 mm

Berends 4'6" & 5' Heavy Duty

BS-01981 Blade Flat Reversible 1981 Use

NEW

Bush Bolt Nut

BSA-01981B BSA-PG1112 BSA-PG1113

One Piece Boron alternatives. BM-08565 Standard duty 2.50 mm thick BM-08326 Heavy duty 3.30 mm thick W 75 T 10 L 368 H 26

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

3

Berends 6' & 7' EHD

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

Grasscare & Flail Mower Replacement Parts

Berends 6' HD

BS-02000 Blade Step 25 mm LH 2000, & 2005 (12') Use Bush Bolt Nut T 10 BSA­ 00178 BSA-PG1112 BSA-PG1113 L 495 H 32

BS-02003 Blade Step 25 mm LH 2003, 1986 Use Bush Bolt Nut T 12 BSA-02003B BSA-PG1112 BSA-PG1113 L 465 H 38

W 100

W 75

Berends 6' Side Delivery

BS-01602 Blade Suction lift 1987 Use Bush Bolt Nut T 16 BSA­00180 BSA-PG1112 BSA-PG1113 L 460 H 32

Berends Pasture Topper

BS-01582 Blade Suction lift 38 mm LH 1801 Use Bush Bolt Nut T 7 BSA­ 00175 BRA-100196 BSA-100285 L 275 H 25

W 75

W 65

Berends EP Slashers

BS-04457 Blade Step 25 mm LH 1980 Use Bush Bolt Nut T 8 BSA-04457B BSA-PG1112 BSA-PG1113 L 262 H 26

Berends 6' Heavy Duty

BS-01585 Flat Reversible 1984 Use Bush Bolt Nut T 10 BSA­ 00178 BSA-PG1112 BSA-PG1113 L 495 H 32

W 65

W 75

Berends

NEW

BS-08001 FLAIL "Y" Mulcher 1600

Pre 2000 model BS-08471 FLAIL "L" Mulcher 1599

Berti

NEW

Overall length 145 mm W 50 T 10 L 120 H 20.5 CI-08496 FLAIL "T" TYPE ECO-FOREST Hole Radius Cutting face width Knuckle width 31 mm 80 mm 75 mm 80 mm

BS-08291 FLAIL "Y" Mulcher long High body 1609. Overall length 195 mm Use Bolt BSA-100673 Nut BSA-100852 W 50 T 10 L 166 H 20.5

Berti & Agricom & M.E.A.A.T.

CI-06/16 FLAIL P TYPE Hole Radius Cutting face width Knuckle width 16.5 mm 95 mm 137 mm 40 mm

Bomford Boot & Turner

CI-FMB003 FLAIL

(OEM:02-959-01)

CI-1357 SHACKLE (OEM:05-895-01) CIA-08031 COLLAR 2 mm

(OEM:02-801-01)

CIA-08032 COLLAR 6 mm

(OEM:02-801-03)

CIA-1368 SPACER

(OEM:02-807-01) CIA-08029 BOLT, NUT, WASHER (OEM:03-675-25) 32 flails per machine See page 30 for flail dimensions

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

PARTS (By Individual Manufacturers)

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

4

Bomford

BM-100759HD FLAIL 5 mm

(OEM:02-812-01)

Length 65 mm Width 40 mm Hole 14 x 26. Overall length 88 mm

ASP "LIGHTNING" TRIMMER LINE & HEADS.

This contractor quality trimmer line is available in both round and square sections of 2.4 mm, 2.7 mm, 3.00 mm, 3.30 mm plus 4.00 mm and in economical 1 lb, 3 lb, and 5 lb rolls. ASP Trimmer line rates as one of the densest nylon lines available in the grass care industry in Australia, to guarantee you outstanding wear resistance and flexibility.

BM-100761 BMA-102670 BMA-00026

32 Pairs per machine

SHACKLE PIN 11 mm SPLIT PINS

Chris Grow 5' (13 mm)

BS-08226 Right Hand MC1520 BS-08227 Left Hand MC1620 Use Bolt Nut Bush BSA-100675 BRA-100852 BSA-00179

TURN TO PAGE 32

Chris Grow 6'

BS-08228 Right Hand MC1500 BS-08229 Left Hand MC1600 Use Bolt Nut Bush BSA-100675 BSA-100852 BSA-00179

W 100

T 13

L 360

H 32

Cox

BD-08012 (2) Blades 28" & 48" RH Stepped & Fluted. Suit Orion, Scout, Stockman series. MB150AHD Use fastener kit BMA-08062

W 100

T 13

L 453

H 32

W 50

T 3

L 148

H 13

Dimensions Ride on blade length is end to end Slasher blade length is from centre of bolt hole Flail length is spinning radius

Caroni

Part No.

Description

W

T

L

Hole

BR-01134

60" deck

50

6

520

18

Cub Cadet

NEW

Part No.

Description

W

T

L

Hole

BR-08501

54" Deck SLT 1554

65

5

463

20

Daken 5'

BS-00467 Blade 5' Twisted Double edge Use Bolt Nut BSA-07453K Bush BSA-06394B

Deutscher

BD-08188 Blade Flat (2) R1 Pair of HD blades for ride on and self propelled units Use fastener kit BD-08055BK

W 100

T 10

L 330

H 38

W 50

T 3

L 122

H 14

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

5

Dixon

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

Grasscare & Flail Mower Replacement Parts

Part No. Description W T L Hole

BR-08282

50" RAM 22Hp

65

5

425

18

Exmark

Part No.

Description

W

T

L

Hole

BR031581

72" DIESEL Z MASTER 103-1581 Step 9 mm 72" DIESEL Z MASTER 103-2521 MULCHER (Not illustrated)

65

6

615

16

BR-08348

65

6

615

16

BR031582

60" DIESEL Z MASTER 103-1582 Step 9 mm

65

6

515

16

Falc--Howard & Schmidt

BM-181024 Flail 12 mm

(OEM:47-07-07) Height 98, Depth 39, Hole 16 x 36 mm

Falc--Howard

BS-06943 BS-279005 Y FLAIL 900 FLAIL

NEW

BMA-151002 BMA-08033

(OEM:47-03-18)

Shackle Spacer Bolt & Nut

Mulcher Double edge

(OEM:47-03-01) Height 73, Width 49

BS-279003

Flat FLAIL

BMA-08034

Mulcher Double edge W 60 T 10 L 171 H 25.5

Feraboli

CI-11/20 FLAIL Hole Radius Cutting face Knuckle width 20.5 mm 90 mm 150 mm 55 mm

Ferri

BS-08490 BS-08491

Y BLADE SUITS MKD200/230/250/280 FLAT BLADE SUITS MKD200/230/250/280 Overall length 145 mm

NEW

W 60

T 8

L 115

H 26

Ferris

Part No.

Description

W

T

L

Hole

BR-08207

72" Deck

65

7

620

16

BRD18037

36", 52" Deck

65

6

457

16

BR-08215

48" Deck

65

6

413

16

BRD18036

61" Deck

65

6

529

16

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

PARTS (By Individual Manufacturers)

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

6

W T L Hole

Ford New Holland

Part No.

Description

BR-07473

AUB163380 Flat 72"

65

8

630

23

NEW

BR-08466

72" Mulching blade

65

8

630

23

BR07473S BR-01588

AUB163380 72" Stepped 10 mm 60" Flat Side Throw 3 per set 72" Stepped 11 mm Side Throw 16019S AUB 162122 Stepped 12 mm 914 & 914A

65

8

630

23

50

6

515

18

BR-07129

65

7

620

23

BR-01560

65

7

520

18

BR-06020

AUB 162122 Stepped 12 mm 914 & 914A

65

7

520

23

NEW

BR-08421

82" Stepped 11 mm MC35

65 BR-010090 BR-010061

7

575

23

Gessner 15'6" & 21'6"

BS-01586

Gianni Ferrari

820D, 921D Flat blade

OEM:01.33.01.0090

820D, 921D LH blade

OEM:01.33.01.0060

BR-010051 Blade Rotary Slasher 15'6" & 21'6"

Use Bolt Nut Bush kit Bush Bolt Nut BSA-08089 BSA-00175 BRA-100196 BSA-100285

820D, 921D RH blade

OEM:01.33.01.0050

BRA-08041

Fixing kit. Suits BR-010090, 010061, 010051 Contains 4 of each (4 x blade fixing bolts, spring washers, upper bushes and nuts.) 1 fixing kit per deck.

W 65

T 7

L 250

H 25

W 50

T 4

L 195

H 20

ASP "LIGHTNING" TRIMMER LINE

TURN TO PAGE 33

This contractor quality trimmer line is available in both round and square sections from 2.4 mm to 4.00 mm and in economical 1 lb, 3 lb, and 5 lb rolls. ASP Trimmer line rates as one of the densest nylon lines available in the grass care industry in Australia, to guarantee you outstanding wear resistance and flexibility. ASP Trimmer line is suitable for use with any type of trimmer head and in all types of commercial applications.

Grass Hopper

Part No.

Description

W

T

L

Hole

BR562390

52" Deck

65

6

457

13

BR-08213

61" Deck

65

6

533

13

BR-08214

72" Deck

65

6

634

13

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

7

Great Dane

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

Grasscare & Flail Mower Replacement Parts

Part No. Description W T L Hole

BR-08104

72" Step 9 mm. LX. Uses 3 blades

65

6

625

16

BRD18036

D18036 Step 9 mm 61" uses 3 blades

65

6

529

16

BRD18037

D18037 Step 9 mm 36" cut uses 2 blades 54" cut uses 3 blades D18086 Step 9 mm 32" cut uses 2 blades 48" cut uses 3 blades

65

6

457

16

BRD18086

65

6

419

16

Great Dane bolt

Great Dane belts

BB-08562 48" Deck Belt B148 BB-08168 48" Deck PTO & 61" drive. 6989 BB-08169 48" Deck to Blade 6953, 48087 BB-08172 61" Blade drive 6963, 48265 BB-08173 61" Transaxle drive 6830, 48085 BB-08174 72" Blade drive 6968, 48295 BB-08175 72" Deck drive 6994, 48359

BRA-08246 Blade bolt Replaces 0331004

LOOKING FOR MULCHING FLAILS ? NOT SURE WHERE TO LOOK ? TRY OUR FLAIL QUICK REFERENCE GUIDE...

ITS ON PAGE 30 ASP PREMIUM QUALITY WEAR PARTS - HUGE RANGE OF BLADESDELIVERY AUSTRALIA WIDE - EXCELLENT FREIGHT RATES. ONLY A PHONE CALL AWAY

07 3881 3464..

Dimensions Ride on blade length is measured end to end Slasher blade length is measured from centre of bolt hole Flail length is the spinning radius

All parts listed are supplied to fit machines indicated and are not sold as genuine parts Please use product numbers in bold type when ordering

PARTS (By Individual Manufacturers)

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

8

BD-08279 Pair of Hi Lift Blades BD-08280 Pair of Std Lift Blades BD-08281 1 Pair both Hi Lift & Std (4 Blades) BD-08324 4 Blades & Fasteners BD-08003BK Bolt kit. Contains : 2 bolts, Nuts, D-washers & Crinkle washers BD-08563 Bolt kit (2) Excludes "D" washers BD-08204 "D" Washer only (1)

AUSTRALIAN MADE HONDA BLADES FROM ASP GIVE YOU MAXIMUM WEAR LIFE AT UNBEATABLE PRICES.. ASK ABOUT OUR BULK BUY DISCOUNTS AND REALLY SAVE !!

Honda 216

Honda Buffalo

BD-08003 1x Pair of Std Blades (19") BD-08003BK Bolt kit. Contains : 2 bolts, Nuts, D-washers & Crinkle washers BD-08563 Bolt kit (2) Excludes "D" washers BD-08204 "D" Washer only (1) BD-08206 Crinkle washer only (1)

BD-08206 Crinkle washer only (1) W 44 T 2 L 148 H 15

Howard Kronos--Falc

W 44 T 2 L 124 H 15 Mulcher Double edge Overall length 204 mm BS-06943 FLAIL T16026

OVERBOOTS

ENG-08278

H/W cotton drill boot top cover and sock saver. Available in various colours

W 65 T 10 L 171 H 25.5

Howard--Falc

BM-181024 Flail 12 mm

(OEM:47-07-07) Height 98, Depth 39, Hole 16 x 36 mm

BMA-151002 BMA-08033

(OEM:47-03-18)

Shackle Spacer Bolt & Nut

(OEM:47-03-01) Height 73, Width 49

BMA-08034

The great majority of the blades in the ASP range are boron blades, manufactured from European boron steel to achieve a +/- 45 Rc hardness level without the risk of the blade becoming brittle. Such a hardness level can not be obtained using either high carbon (favored by many American manufacturers) or spring steel. Spring steel has been the most common type of steel used to manufacture blades in Australia for many years.

Howard Stealth & Rolla Mower

Howard Tip Bolt Kit

BR-78016 Blade Flat 3mm

(OEM:78016)

BR-78241 Blade Fluted 3mm

OEM:78241)

BMA-08065 Bolt, Nut, Washer kit Suits BR78016 & BR-78241 Howard Rolla mower & Stealth mowers BMA-08063 BMA-08064 BMA-08061 Bolt Nut Coneloc Washer

BR-78016K Blade kit Flat 12 off 78016 & fasteners BR-78241K Blade kit Fluted 12 off 78241 & fasteners. BR-08284 Blade kit Fluted, 60 off 78241 blades and fasteners BMA-08065 Fastener kit W 50 T 3 L 100 H 13

ASP NOW HAVE EARMUFFS IN 29.3 dB AND 23.4 dB ...... Page 44 !!

All parts listed are supplied to fit machines indicated and are not sold as genuine parts Please use product numbers in bold type when ordering

9

Howard Stealth Blade

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

Grasscare & Flail Mower Replacement Parts

BS-616722 Blade W 75 Suit Stealth LH T 8 L 692 H 13.5/20/13.5

ASP HAS A HUGE RANGE OF HIGH TENSILE FASTENERS AVAILABLE AT UNBEATABLE PRICES.

Howard 6' Double Edge

BS-01572 6' Twisted Double Edge 73955 Use fastener kit BSA-78299K W 75 T 12 L 432 H 32

Howard 5' Double Edge

BS-01573 5' Twisted Double Edge 72900 Use fastener kit BSA-78299K W 75 T 12 L 280 H 32

Howard 6' Double Edge Stepped

Howard 6' Suction lift

BS-01724

BS-01574 6' Double Edge. 74598A 40 mm Step Use fastener kit BSA-78299K W 75 T 12 L 365 H 32

6' Single Edge Suction lift 78663 Use fastener kit BSA-78299K W 75 T 12 L 355 H 32

Howard 6' Kit

Howard Bolt Kits

BS-78663K 6' blade Kit. 2 off Boron Blades, hardened bushes, high tensile nib bolts and nuts. OEM: 78663K W 75 T 12 L 355 H 32

BSA-78299K Nib Bolt kit. 1 off Nib bolt, bush & nut. OEM 78299K BSA-74222K Square Bolt kit. 1 off square neck bolt, bush & nut OEM: 74222K

Howard Bushes

Overboots Now at ASP See Page 44

All parts listed are supplied to fit machines indicated and are not sold as genuine parts Please use product numbers in bold type when ordering

BSA-00179 Bush Suit BS-01724, BS-01572, BS-01573, BS-01574 OEM: 74221

PARTS (By Individual Manufacturers)

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

10

Howard Beams

Part no. BSA-00484 BSA-00486 BSA-00489 BSA-00480 BSA-00479 BSA-00478 Replaces 78818 78816 78814 78734 78732 78693 Description

Beam 5' Nib 892 x 130 x 10 Beam 6' Nib 1196 x 130 x 10 Beam 7' Nib 1494 x 130 x 10 Spacer 5' 722 x 130 x 12 Spacer 6' 1026 x 130 x 12 Spacer 7' 1324 x 130 x 12

Howard Beam Bolt Kit

BSA-74808K Bolt & Nut Bolt kit to secure Howard beam to Howard Slasher. 4 per kit

Husqvarna belts

BB-08162 Cutter. 36", 38", 44" Ride on. 12 - 15HP A88 BB-08163 Cutter. Drive belt suit LTH130, 40,50,70, & LTH130 Hydro 42" A86

Husqvarna

Part No.

Description

W

T

L

Hole

BRD18036

61" Commercial Step 9 mm

65

6

534

16

BR-08224

42"

57

5

531

STAR

BR-08266

48" HI LIFT

64

5

419

STAR

NEW

BR-08378

48" PROFLEX Rider

65

5

430

13

NEW

BR-08345

52" Zero Turn

65

6

455

16

BRA355750

Blade bar suit 36", 38" & 42". 5 point star. Use blade BD-08012 & Bolt kit BRA-120005. 2 per set

See page 44

ASP IS BACKED BY $10,000,000 PRODUCT LIABILITY INSURANCE

All parts listed are supplied to fit machines indicated and are not sold as genuine parts Please use product numbers in bold type when ordering

11

Hustler

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

Grasscare & Flail Mower Replacement Parts

Part No. Description W T L Hole

TBA

72" Super Z. ZTR

75

6

605

16

BR345454

44" Fastrak Step 9 mm 3 per set

65

4.8

394

16

BRD18037

52" Flat. 3 per set

65

6

457

16

BRD18036

60" Super Z Diesel & Petrol

65

6

529

16

NEW

BR-08210

42" Fastrak

64

6

520

16

OVERBOOTS

ENG-08278

H/W cotton drill boot top cover and sock saver. Available in navy blue.

WELDERS GLOVES

ENG-5225FF

Heavy Duty Full length welding gloves.

Iseki

Part No. BR07162A

Description

72" Step 15 mm 3496107M91 3 per set

W 60

T 7

L 629

Hole 20

BR-0525A deck. 3 per set

60" Step 15 mm SM60

60

7

527

20

Iseki Blade Nut

Iseki Tension Washers

BRA-83665 Tension Washer 16 mm hole. 3496222M1 Suit BR-07162 BRA-83665A Tension Washer 20 mm hole. 865430600400 Suit BR-07162A

BRA-100293 Nut 859530600700 Suit BR-07162A 20 mm

Iseki Blade Carrier

Iseki Mower Tips

BM-V100RHK Universal blade tip kit comprising 60 off blades, nuts, bolts & washers BM-V100RH BMA-08059 BMA-08060 BMA-08061 Blade Bolt Nut Washer

BR-07162AC 20 mm hole. 865430600400, 3 per set To adapt Right Hand Universal blades to 72" deck

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

PARTS (By Individual Manufacturers)

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

12

Iseki Deck Belt

BB-08040 OEM: 865520201301 Suit 72 " decks on SF-300 & SF340, B144 BB-08571 OEM:865520201300 Suit 72" deck on SF330. B146

Simple to Order..

Our experienced team is available to talk to from 8:00 am to 5:00 pm, Monday to Friday on 07 3881 3464. Or by fax, orders can be sent to 07 3881 3474 Or by e-mail: [email protected]

Jacobsen

Part No.

Description 72" Stepped JT3007760-8LA6870 3 per set

W

T

L

Hole

BR-3007760

65

6

630

13

ASP "LIGHTNING" TRIMMER LINE

TURN TO PAGE 32

This contractor quality trimmer line is available in both round and square sections of 2.4 mm, 2.7 mm, 3.00 mm plus 4.00 mm and in economical 1 lb, 3 lb, and 5 lb rolls. ASP Trimmer line rates as one of the densest nylon lines available in the grass care industry in Australia, to guarantee you outstanding wear resistance and flexibility.

Jarrett

BS-43751 BLADE

(OEM:43751)

Requires Bolt & Nut kit BSA-43752

W 50

T 4

L 105

H 20.5

Jarrett 4' - 6' Slasher

BS-01583 Blade Stepped 35 mm

Use Bush BSA-00178 Bolt BSA-100673 Nut BSA-100852

Jarrett Bolt Kit

BSA-43752 Fastener kit Suits Jarrett blades 43751 & Saliba blades BS-SAL162L & R.

W 75

T 10

L 485

H 32

Jarrett Slasher 1m & 4' pasture

BS-01582 Blade Step 38 mm LH Suction lift

Jarrett Bolt

BSA-21008

Use Hardened bolt Nut Or Bolt Nut Bush kit Bush Bolt Nut

BSA-21008 BSA-100852 BSA-08089 BSA-00175 BRA-100196 BSA-100285

Hardened bolt to suit BS-01582 Use nut BSA-100852

W 65

T 7

L 275

H 25

Please use product numbers in bold type when ordering

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

13

John Deere Belts

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

Grasscare & Flail Mower Replacement Parts

Part No Model Application OEM No

BB-08133 BB-08134 BB-08135 BB-08136 BB-08137 BB-08138 BB-08139 BB-08140 BB-08141 BB-08137 BB-08142 BB-08139 BB-08145 BB-08016

LT155/LT166 LT155/LT166 LX176, LX188 LX176 LX176 LX188 LX188 LX277/LX279 LX277/LX279 LX277/LX279 LX277/LX279 LX277/LX279 F935 1445

TRANSMISSION 38'' DECK TRANSMISSION 38" ENGINE TO DECK 38'' DECK 48" ENGINE TO DECK 48" DECK TRANSMISSION 38" ENGINE TO DECK 38" DECK 48" ENGINE TO DECK 48" DECK 72" SIDE DISCHARGE DECK 72" DECK BELT

M126009. A84 M126536. A112 M110978, M110312 A100 M77988. B59 M82462. A63 M110313. B63 M110978. B107 M127521. A85 M117608. A57 M82462. A63 M118684. B62 M110313. B107 M87373. CC154 TCU12440. C170

BB-08040

F1145

72" SIDE DISCHARGE DECK 60" CUTTER DRIVE BELT REAR DISCHARGE 60" PTO TO CUTTER

M112414. B144

BB-08166

935

M72987. B136

BB-08167

935

AM100465. B31

BB-08193

GT245

54" DECK BELT

B120

John Deere Deck Bolt

BRA-100195 Deck Bolt Suit 1145 19M7343 BRA-100195SH Deck Bolt Suit 1445, 1400-1500 62", F735, M665 19M7489

John Deere Tension Washer

BRA-83665 Suit 72" & 60" decks. M83665

John Deere

NEW

Part No.

Description 1600 WAM . 14001500 Series., 62" 7 Iron Deck

W

T

L

Hole

BR-08382

60

8

555

23

NEW

BR-08470

54" M144652

65

5

480

23

NEW

BR-08466

72" Mulcher M142514

65

8

630

23

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

PARTS (By Individual Manufacturers)

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

14

W T L Hole

John Deere

Part No.

Description

BR-07473

72" Flat M141786, M83363 Standard lift . 3 per set

65

8

630

23

BR07473S

72" & 7 IRON. 997 Diesel. Step 10 mm. M141786, M83363. TCU15882 M141669. 1420, 1435,1445, 1545, 1565, 777, 797. Standard lift. 3 per set. Use Bolt BRA-100195SH. 19M7489

60

8

630

23

BR-06253

60" Flat M141785, M87622 Standard lift 3 per set

65

8

520

23

BR128485

60" M128485. TCU15881. M665, 60" & 7 IRON F620, F680, F687, 737, 757, 777, 797, 997 Diesel, 1420, 1435, 1445, 1545, 1565. 3 per set. Use BRA-100195SH Bolt 19M7489 54C" M143520 LX280,LX280AWS,LX289. GT245,GT235E,GT235,GT225,GX255,GX325, GX335.GX355. 465, 475,485,495,575, 585,595,700,720,724,728,740,748. 54" M115496. F620, F680, F687. 3 per set

65

8

533

23

BR330365

65

5

473

21

BR330373

48" M115495. F620, F680, F687. 3 per set

65

5

422

21

BR330405

48" Hi Lift M76466. M111522 Step 9 mm. 3 per set

65

5

422

21

BR330290

38" M82408 LT150 Mid mount. Low lift. Step 9 mm. 2 per set

65

5

495

17.5

BR330397

38" M83459. LT150 High lift. STX38 , F525. Step 7 mm. 2 per set

75

5

495

17.5

BR127500

48" & 48C decks. M145476 LX280,LX280AWS, LX289.GT245,GT235E,GT235,GT225,GX255, GX325,GX335 X355.465,475, 485,495,575, 585,595,700,720,724,728,740,748.3 per set.

65

5

426

21

BR-20249

42" SABRE GX -20249, GX20433, L100, L108, L111. 2 per set

65

4

543

10.5/17 /10.5

BR-08095

62" M143504.LX280,LX280AWS,LX289.GT245, GT235E,GT235,GT225,GX255,GX325,GX335. GX355.465,475,485,495,575,585,595,700,720,7 24,728,740,748.3 per set 48" & 48C decks. High Lift LX280,LX280AWS, LX289.GT245,GT235E,GT235,GT225,GX255, GX325,GX335.GX355.465,475, 485,495,575, 585,595,700,720,724,728,740,748.3 per set.

65

6

546

20

BR-08148

65

5

426

21

NEW

BR-20250

48" SABRE GX20250, GX20434. L120, L130

65

4

430

10.5/17 /10.5

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

15

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

Grasscare & Flail Mower Replacement Parts

John Deere Blade Carrier

John Deere Mower Tips

BM-V100RH KIT Universal blade tip kit comprising 60 off blades, nuts, bolts & washers BM-V100RH BMA-08059 BMA-08060 BMA-08061 Blade Bolt Nut Washer

BR-07473C M141786 To adapt R H cut Universal blades to 72" decks. 3 per set BR-06253C M141785 To adapt R H cut Universal blades to 60" decks. 3 per set

Kanga

BS-00467

Dimensions Ride on blade length is end to end Slasher blade length is from centre of bolt hole Flail length is the spinning radius

Blade Twisted Double edge Use Bolt Nut Kit BSA-07453K Bush BSA­06394B

W 100

T 10

L 330

H 38

Krone

BM-336003 Flail

OEM:S6200080

Krone

BS-08009 Flail Mulcher Double edge. OEM:S6400080

(Uses BS-06943 Nobili flail + BSA08097 bush) Overall length 204 mm

W 40

T 5

L 115

H 14.5

W 65

T 10

L 171

H 17

Our extensive range of Quality Wear Resistant Parts and Accessories for professional Grasscare machinery and Agricultural Equipment has been developed to help councils departments, contractors, farmers and golf courses reduce their running costs and maximise their profits. Using ASP's range of quality assured replacement parts, backed by $10,000,000 product liability insurance, you'll benefit from excellent prices, maximum wear life, with a fast and efficient delivery - all dedicated to the needs of the professional.

Kubota Blade Washer

BRA-K6850 Flat Washer 76550-34390 O/D 42 mm, I/D 28 mm. & 1 mm Thick

Kubota Tension Washers

BRA-K6846 Tension washer OEM:76550-34350, K5651-34350 72 mm O/D, 30 mm I/D, 3 mm Thick

Kubota Blade Bolts

BRA-K6848

70722-34374

BRA-K6845 BRA-K6847 OEM: 70722-34350 60 mm O/D, 24 mm I/D, 3 mm Thick.

76539-34372

BRA-K6849

76550-34373

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

PARTS (By Individual Manufacturers)

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

16

W T L Hole diameter

Kubota

Part No.

Description

76553-3433-0 Step 14 mm 3 per set. RC72B, RC72F30. 2560, ZD28, 3560, 3060, 2560, ZD28. Side discharge 76544-9905-0 Step 10 mm Rear discharge 3 per set RC72-F20, RC72-F221. 3560 K5651-3433-0, 7653934330. Step 13 mm 3 per set RC60-G20, RC60B RC60-21b, RC60-24B RC60-221. C60-F19. ZD21, 70722-3433-0 Flat 3 per set RC60-71H, RC60-72A, RC60-72H, RC60-82H, RC60-27 70722-3433-0 Step 18 mm Side throw 3 per set. RC60-71H, RC60-72A RC60-72H, RC60-82H RC60-27 76543-9905-0 Step 10 mm 3 per set. RC60-92H, RC60-20 RC60-25, RC60F20 RC60-F24, 76529-3433-0 Step 20 mm 3 per set RC54-G20, RC54B RC54-F19, RC54-FZ21. ZD18

BR-07462

65

7

620

29

BR-07129

60

7

620

23

BR-06677

65

7

520

29

BR-01588

50

6

515

18

BR-01134

50

6

520

18

BR-06020

60

7

520

23

BR-06676

65

7

470

29

BR06676/23

K5351-3434-0 Step 20 mm 3 per set. RCK54-22BX

65

7

470

23

BR-01132

76500-3433-0 Step 18 mm Side throw 3 per set RC48G, RC48-62A RC4862H, RC48-62F 76505-3433-0 Step 10 mm 3 per set RC48-G20, RC48-62A

50

6

420

18

BR-06673

50

6

420

18

BR-01133

K5142-71820 Step 10 mm 3 per set RC44G

50

6

385

18

BR-01560

K5112-71920 Step 10 mm 2 per set. RC40LT

65

7

520

18

ASP "LIGHTNING" TRIMMER LINE TURN TO PAGE 32

This contractor quality trimmer line is available in both round and square sections of 2.4 mm, 2.7 mm, 3.00 mm, 3.30 mm plus 4.00 mm and in economical 1 lb, 3 lb, and 5 lb rolls. ASP Trimmer line rates as one of the densest nylon lines available in the grass care industry in Australia, to guarantee you outstanding wear resistance and flexibility.

Kubota Mower Tips

BM-V100RHK

76553-34330, 76544-99050, 76539-34330

Universal blade kit comprising 60 off RH blades, nuts, bolts & washers BM-V100RH BMA-08059 BMA-08060 BMA-08061 Blade Bolt Nut Washer

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

17

Loxton

BSA-07658 Bolt, Nut & Bracket Kit BSA-07659 Loxton Bush (Separate to Kit)

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

Grasscare & Flail Mower Replacement Parts

Loxton

BS-07652 Blade Flat Double edge SL-056 Bolt Nut Brkt Kit Bush BSA-07658 BSA­ 07659

Loxton

BS-07615 Blade Double Edge 22 mm Step SLP-057 Fastener Kit Bush W 70 T 8 BSA-07658 BSA­07659 L 238 H 23

W 65

T 8

L 238

H 23

Loxton

BS-07654 Blade LH 15 mm Step Suction Lift SLP-055

BS-07653 Blade RH 15 mm Step Suction Lift SLP-054 Bolt Nut Brkt Kit Bush BSA-07658 BSA-07659 L 238 H 23

Maletti

BS-06943 FLAIL Mulcher Double edge W 65 T 10 L 171 H 25.5

W 70

T 8

McConnel

CI-1387 F10 FLAIL (OEM:73-143-66)

Radius 135 mm Cutting face 60 mm Hole 25 mm

Maletti & M.E.A.A.T.

NEW

CI-1400 FLAIL LARGE

(OEM:15002041) 16.5 mm Hole, 110 mm Radius, 120 mm Cutting face. Knuckle width 40 mm

CI-1387K KIT (1 Flail + bolt, nut & bush) Flails / mc. 1m=20, 1.2m=24 CIA-100397 SPECIAL BOLT

(OEM:73-142-22)

CIA-100850 NUT CIA-08028 SPECIAL BOLT & NUT (OEM:13002075 ) W 65 T 10 L 171 H 25.5

(OEM:01-410-06)

CIA-1390 BUSH

(OEM:73-14-233)

CIA-08473 Spring washer. 1 off per flail required on some late model drums.

McCulloch

NEW

Part No.

Description

W

T

L

Hole

BR-08224

42"

57

5

531

STAR

BRA-355750

Blade bar suit 36", 38" & 42". 5 point star. Use blade BD-08012 & Bolt kit BRA-120005. 2 per set

PLEASE NOTE: ALL SLASHER BLADE LENGTHS ARE TAKEN FROM THE CENTRE OF THE HOLE TO THE END OF THE BLADE

McLeod / MF 6' Standard

BS-01075 Blade 6'. Use 1" pin BSA-700427 BSA-700430 BSA-01074 W 100 T 13 L 560 Pin 1" Nut 1" Bush H 45

McLeod / MF 6' Suction Lift

BS-07805 Blade 6'. Use 1" pin BSA-700427 BSA-700430 BSA-01074 W 100 T 13 Pin 1" Nut 1" Bush L 560 H 45

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

PARTS (By Individual Manufacturers)

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

18

BS-00986 Blade 5' Standard. Use 7/8" pin

McLeod / MF 5' Heavy Duty

BS-1138 Blade 5'. Use 1" pin BSA-700427 BSA-700430 BSA-01074 Pin 1" Nut 1" Bush

McLeod / MF 5' Standard

BSA-700419 BSA-700423 BSA-01073 W 75 T 13

Pin 7/8" Nut 7/8" Bush L 495 H 35

W 100

T 13

L 495

H 45

McLeod / MF Pins, Nuts, Boss & Cup

BSA-700419 BSA-700427 BSA-700423 BSA-700430 BSA-701962 BSA-700421 BSA-700431 BSA-700420 BSA-700428 Boss Cup Pin 7/8" Pin 1" Nut 7/8" Nut 1" Key Boss 7/8" Boss 1" Cup 7/8" Cup 1"

McLeod / MF 4' Heavy Duty

BS-07161 47 mm step

Blade 4' HD. Use 7/8" pin BSA-700419 BSA-700423 BSA-07161B W 100 T 10 Pin 7/8" Nut 7/8" Bush L 331 H 38

McLeod / MF Clutch

Maschio BL, CR, BISONTE

BSA-700494 Clutch disc 151 x 57 x 4.7

CI-1400 FLAIL Hole Radius Cutting Edge Knuckle width 16.5 mm 110 mm 120 mm 40 mm

Maschio BA

BS-08304 FLAIL

Maschio MS, CL, ML

BS-08303 FLAIL

Overall length 142 mm

Overall length 220 mm

W 45

T 8

L 120

H 16.5

W 60

T 8

L 190

H 25.5

Mott

BM-100759 BM-100759HD

Overall length 88 mm

Mott Fine

FLAIL 3 mm FLAIL 5 mm

Height 65 mm Width 45 mm Hole 13 x 27

BM-102086

32 X 115 Hole 9 mm

Overall length 125 mm

BLADE

Height 65 mm Width 40 mm Hole 14 x 26

BMA-101034 SHACKLE PIN 11 mm SPLIT PINS BMA-00026

PIN 9 mm SPLIT PIN

BM-100761 BMA-102670 BMA-00026

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

19

MTD

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

Grasscare & Flail Mower Replacement Parts

BD-08012 BLADE Stepped & Fluted 19" & 21" with blade carrier conversion bar. Requires Bolt, Nut, Washer kit BRA-120005 W 50 T 3.2 L 148 H 13

MTD Belts

BB-08179 38" Deck 754-0433. B69 BB-08193 42" Deck

MTD

Part No. BR115225A BR115227A BRA355755

Description 38". Mulcher blade. Side discharge 742-0610 2 per set 42". Mulcher blade. Side discharge 742-0616 2 per set Blade bar 2 per set

W

T

L

Hole 6 pt star type 6 pt star type 6 pt star type Hole 21.5

76

3.8

490

76

3.8

538

Suit 38" & 42" cut. Use blade BD08012 and Bolt kit BRA-120005 W 57 T 4.7 L 540

Murray

Part No. BR335764 BR335012 BR335030

Description

42" High lift 92418E701 2 per set 40" 91871HT, 92002E701 2 per set

57

4.7

518

21.5

38" 91742HT, 91742E701 2 per set

57

4.7

495

21.5

BR-08219

38" Mulcher, 61210095104

57

4.7

495

21.5

BR-08220

40" Mulcher, 61210095103

57

4.7

518

21.5

BR-08221

42" Mulcher, 61210095100

57

4.7

540

21.5

Murray belts

BB-08163 40" 42", 46" Drive with Dyna transmission 37x80. A86 BB-08191 36", 38" 42" Drive 36x11. A95 BB-08192 42" Deck 37x75. A91 BB-08163 40" Deck Side Disch. 36x62. A86 BB-08137 40" Deck Rear Disch 37x21. A63 BB-08141 36" Cutter drive 5 Speed 37x24. A57 BB-08140 46" Cutter drive LT's 37x89. A85

Murray Washer & Nut

BRA-08247 Nut

BRA-08248 Washer

Nobili & Ormarv

BS-06943 FLAIL Mulcher Double edge. (OEM: N 2555004)

BNU - BNG Mulchers Width Thickness Length Hole diameter Overall length 65 mm 10 mm 171 mm 25.5 mm 204 mm

Nobili & Ormarv

BS-279003 FLAIL Straight Double edge

BNU - BNG Mulchers Width Thickness Length Hole Diameter Overall length 60 mm 10 mm 171 mm 25.5 mm 204 mm

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

PARTS (By Individual Manufacturers)

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

20

BS-1781000 FLAIL

Double Edge (OEM: N1781000) BNE - TB Mulchers Width Thickness Length Hole Diameter Overall length 40 mm 8 mm 123 mm 16.5 mm 143 mm

Nobili & Ormarv

BS-279005 FLAIL 900 Double edge

BNU - BNG Mulchers Width Thickness Length Hole Diameter Overall length 60 mm 10 mm 171 mm 25.5 mm 204 mm

Nobili

Pegoraro & Perugini

NEW

Perugini & Ormarv

Hole Radius Cutting face Knuckle width

NEW

BS-06943 Y FLAIL Mulcher Double edge.

Width Thickness Length Hole diameter Overall length 65 mm 10 mm 171 mm 25.5 mm 204 mm

CI-1400 FLAIL LARGE

16.5 mm, 110 mm, 120 mm. 40 mm

CIA-08028 SPECIAL BOLT & NUT

Ransome Bobcat

Part No.

Description 112111-3 61" uses 3 blades Stepped 9 mm 36" cut uses 2 blades 54" cut uses 3 blades Stepped 9 mm 32" cut uses 2 blades 48" cut uses 3 blades Stepped 9 mm BAN2111-PD 3 per set

W

T

L

Hole

BR-08311

65

6

534

16

BRD18037

65

6

457

16

BRD18086

65

6

419

16

BR-08217

60

6

630

16

Rover

BD-08005 BLADE (2) 18" Model. Flat & Fluted. Suit rear catcher models. OEM: 1118 BD-08005BK Bolt kit (2) W 38 T 3 L 94 H 13

Rover

BD-08100 BLADE (2) Ranger, Rancher, Colt Model. Fluted. OEM: A07873K BD-08005BK Bolt kit (2)

W 50

T 2

L 140

H 13

Rover Procut 560

Heavy Duty blade BM-V100RH BLADE RH 5 mm step Requires Bolt, Nut, Washer kit BMA-08062 BM-V100RH KIT 60 off Blades, RH, bolts, nuts & washers W 65 T 3 L 120 H 13

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

21

Saliba

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

Grasscare & Flail Mower Replacement Parts

Sammut

BM-V100LLH BM-V100LRH BS-SAL162L BLADE LH BS-SAL162R BLADE RH Requires Bolt & Nut kit BSA-43752 BR-08423 Kit ( Includes 8 of each LH & RH Blades plus fasteners) BLADE LH BLADE RH Requires Bolt & Nut kit BSA-08036 BR-08422 Kit ( Includes 8 of each LH & RH Blades plus fasteners) Old type 6 mm step & 3 mm thick W 65 T 3 L 120 H 18.5

W 50

T 5

L 140

H 20.5

Saliba

NEW

Sammut

BS-08579 BS-08580 BLADE LH BLADE RH

NEW

BSA-08036

BM-08577 BM-08578

BLADE LH BLADE RH

Requires Bolt & Nut kit BSA-43752 New type 65 mm wide. W 65 T 5 L 140 H 20.5 Requires Bolt & Nut kit BSA-08036 New type 16 mm step & 4 mm thick W 65 Description 72" Step 9 mm W 65 T 6 T 4 L 120 L 625 H 18.5 Hole 16

Scag

Part No. BR-08104

BR-08311

48111 Stepped 9 mm 61" uses 3 blades 48108 Stepped 9 mm 36" cut uses 2 blades 52" cut uses 3 blades 48084 Stepped 9 mm 32" cut uses 2 blades 48" cut uses 3 blades

65

6

534

16

BRD18037 BRD18086

65

6

457

16

65

6

419

16

Scag belts

BB-08168 48" Deck PTO & 61" deck drive. 6989 BB-08169 48" Deck to Blade. 6953 BB-08170 52" Deck drive. 6993 BB-08171 52" Blade drive. 6956 BB-08172 61" Blade drive. 6963 BB-08173 61" Transaxle drive belt. 6830 BB-08174 72" Blade drive. 6968 BB-08175 72" Deck drive. 6994

Seppi

BS-08304 GRASS FLAIL

Replaces CI-1400. Requires 2 off BS-08304 Flail Plus 2 off BSA-00177 Bush Overall length 142 mm

W 45

T 8

L 120

H 16.5

Scott-Bonner Queen 30"

Heat treated

BM-08581 BM-08582 BM-08583 BLADE .035" BLADE .045" BLADE .060" LOW 393000TF35 MEDIUM 393000TFST HEAVY 393000CB

NEW

W 65

T 5

L 762

H 9 holes

None Heat treated

BM-08584 BM-08585 BM-08585 BLADE .035" BLADE .045" BLADE .060" LOW 393000TF35 MEDIUM 393000TFST HEAVY 393000CB

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

PARTS (By Individual Manufacturers)

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

22

CI-08035 FLAIL

MEGA MULCHER. (OEM:LMD 0006) Hole 35 mm Radius 105 mm Cutting face 80 mm Knuckle width 80 mm

Seppi & Agricom

CI-1400 FLAIL LARGE

(OEM:15002041) 16.5 mm Hole, 110 mm Radius, 120 mm Cutting face. Knuckle width 40 mm

Seppi

CI-1401 FLAIL SMALL

(OEM:13002001) 16.5 mm Hole, 90 mm Radius, 120 mm Cutting face. Knuckle width 40 mm

CI-FMB14 FORST FLAIL

ALSO FAE & BERTI. Hole Radius Cutting face Knuckle width (OEM:11001008) 31 mm 80 mm 70 mm 60 mm

CIA-02 Flail support CIA-08028 SPECIAL BOLT & NUT

(OEM:13002075 )

Sicma

NEW

Sicma & Cabe

BS-08490 BS-08491

Y BLADE SUITS MKD200/230/250/280 FLAT BLADE SUITS MKD200/230/250/280 Overall length 145 mm

CI-1400 FLAIL

Hole Radius Cutting face Knuckle width 16.5 mm 100 mm 120 mm 40 mm

W 60

T 8

L 115

H 26

Sicma

CI-11/20 FLAIL

Hole Radius Cutting face Knuckle width 20.5 mm 90 mm 150 mm 55 mm

Sicma

BS-06943 BS-279005 Y FLAIL 900 FLAIL

Mulcher Double edge

(ALSO SUITS COSMAG FD-RM-11-20)

BS-279003

Flat FLAIL

Mulcher Double edge W 60 T 10 L 171 H 25.5

CIA-08330 SPECIAL BOLT & NUT

Shibaura

Part No.

Description

W

T

L

Hole

BR-07129

72" RH Step 10 mm 76550-34332 3 per set

65

7

620

23

BR-01588

60" Flat 645310220 3 per set

50

6

520

18

BR-01560

40" Step 10 mm 645310220, 2 per set

65

7

520

18

Sitrex

NEW

Part No.

Description

W

T

L

Hole

BR-08327

60" SM 150

50

6

510

19

Snapper

Part No.

Description

Step 9mm 36" cut uses 2 blades 54" cut uses 3 blades

W

T

L

Hole

BRD18037

65

6

457

16

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

23

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

Grasscare & Flail Mower Replacement Parts

Part No Description

S1164 Step 20 mm LH 4'6" Trimdeck 3 per set Use Bolt kit BRA-08066 S1508 Step 18 mm LH 5' Trimdeck 3 per set Use Bolt kit BRA-08066 S1631 Step 20 mm LH 6' Outfront 3 per set Use Bolt kit BRA-08066 S1612 Step 20 mm No Flute FSM 180R. Outfront deck. Use Bolt kit BRA-08066 S3685 Step 15 mm LH 6' Trimdeck Contractor 3 per set Use Bolt kit BRA-08067 S1611 Step 18 mm LH S3690 12' Trimdeck Contractor 5 per set. Use Bolt kit BRA-08067 S1549 12'. SRM150R

Superior Trimdeck & Outfront

W

T

L

Hole (s)

BR-01164

65

5

476

10/16/10

BR-07502

65

6

510

10/16/10

BR-07500

75

8

635

11/17.5/11

BR07500NF

75

8

635

11/17.5/11

BR-07501

75

8

635

14/17.5/14

BR-07503

75

8

786

14/17.5/14

BR-08218

65

6

510

10/16.5/10

Superior Page

BS-01586 Blade. L36 LH. RH S3608

Use Fastener kit Bush Bolt Nut BSA-08089 BSA-00175 BSA-100196 BSA-100285

Superior Page 4'6" & 5'

BS-P1938/10 Blade 4'6". Step 40 mm. Single Edge. LH S4065, S4210, P1938, P2795.

Use Bolt kit Bush Bolt Nut BSA-08042 BSA-00178 BSA-S2115 BSA-PG1113

W 65

T 7

L 250

H 25

W 75

T 10

L 300

H 32

Superior Page 5'

BS-P1927 Blade 5'. Flat reversible. LH 1927

Use Bolt kit Bush Bolt Nut BSA-08042 BSA-00178 BSA-S2115 BSA-PG1113

Superior Page 5'

BS-S2427 Blade 5'. Flat LH. RH S2427

Use Bolt kit Bush Bolt Nut BSA-08042 BSA-00178 BSA-S2115 BSA-PG1113

W 75

T 8

L 300

H 32

W 75

T 10

L 305

H 32

Superior / Page 5'

BS-01599 Blade 5' Flat Reversible S4062, P1502

Use Dome Bolt, kit Bush Bolt Nut BSA-S2115K BSA-00180 BSA-S2115 BSA-PG1113

W 75

T 16

L 305

H

The information and the specifications given in this catalogue are given in good faith as being correct and an accurate guide to ordering and correct part identification. Customers are nevertheless encouraged to thoroughly check for part number correctness before ordering, by verifying sizes, and models fitted, and OEM cross references to ensure any part ordered is correct for their application. ASP reserve the right to upgrade specifications without prior notice.

Please use product numbers in bold type when ordering

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

PARTS (By Individual Manufacturers)

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

24

BS-01605 Blade 5' Step 40 mm. LH. S4063, P2027

Use Dome Bolt, kit Bush Bolt Nut BSA-S2115K BSA-00180 BSA-S2115 BSA-PG1113

Superior Page 5'

BS-00797 Blade 5' Step 40 mm. LH RH. S4600, P4073

Use Dome Bolt, kit Bush Bolt Nut BSA-S2115K BSA-00180 BSA-S2115 BSA-PG1113

Superior / Page 5'

W 75

T 16

L 305

H 32

W 75

T 16

L 305

H 32

PLEASE NOTE: ALL SLASHER BLADE LENGTHS ARE TAKEN FROM THE CENTRE OF THE HOLE TO THE END OF THE BLADE

Superior / Page 5'

BS-01601 Blade 5' Suction Lift. LH. S4064, P1503

Use Dome Bolt, kit Bush Bolt Nut BSA-S2115K BSA-00180 BSA-S2115 BSA-PG1113

Superior Page 6'

BS-S2428 Blade 6'. Flat reversible LHC. S2428

Use Bolt kit Bush Bolt Nut BSA-08042 BSA-00178 BSA-S2115 BSA-PG1113

W 75

T 16

L 305

H 32

W 75

T 10

L 460

H 32

Superior / Page 6'

BS-01600 Blade 6' Flat Reversible. P1584, P4098, S5061

Use Dome Bolt, kit Bush Bolt Nut BSA-S2115K BSA-00180 BSA-S2115 BSA-PG1113

Superior / Page 6'

BS-P2028 Blade 6' Step 40 mm LH S5063, P2028

Use Dome Bolt, kit Bush Bolt Nut BSA-S2115K BSA-00180 BSA-S2115 BSA-PG1113

W 75

T 16

L 460

H 32

W 75

T 10

L 460

H 32

Superior Page 6'

BS-S2424 Blade 6' Step 40 mm RH &LH. P2028 & S2424

Use Bolt kit Bush Bolt Nut BSA-08042 BSA-00178 BSA-S2115 BSA-PG1113

Superior / Page 6'

BS-01603 Blade 6' Step 40 mm LH S5063, P2028

Use Dome Bolt, kit Bush Bolt Nut BSA-S2115K BSA-00180 BSA-S2115 BSA-PG1113

W 75

T 10

L 460

H 32

W 75

T 16

L 460

H 32

Superior / Page 6'

BS-01602 Blade 6' Suction Lift. LH. Self sharpening. S5064, P1585

Use Dome Bolt, kit Bush Bolt Nut BSA-S2115K BSA-00180 BSA-S2115 BSA-PG1113

Superior / Page 6'

BS-01604 Blade 6' Step 40 mm. LH RH. S2142, P4099 BS-01606 Blade 6'. Step 75 mm. LH RH S2143 S2164

Use Dome Bolt, kit Bush Bolt Nut BSA-S2115K BSA-00180 BSA-S2115 BSA-PG1113

W 75

T 16

L 460

H 32

W 75

T 16

L 460

H 32

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

25

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

Grasscare & Flail Mower Replacement Parts

Superior Dome Head kit 8 & 10 mm blades Superior Hex. Head kit 8 & 10 mm blades

BSA-08042 Kit comprises:BSA-S2115 Bolt Dome Head High Tensile. S2115 BSA-00179 Bush 10 mm Suit all 8 & 10 mm Page Superior slasher blades with 32 mm Hole. S5069 BSA-PG1113 S5067 Nut Nyloc BSA-08043 Kit comprises:BSA-PG1112 Bolt Hex. Head High Tensile. BSA-00179 Bush 10 mm Suit all 8 & 10 mm Page Superior slasher blades with 32 mm Hole. BSA-PG1113 S5067 Nut Nyloc

Superior Dome Head kit 16 mm blades

BSA-S2115K Kit comprises:BSA-S2115 Bolt Dome Head High Tensile. S2115 BSA-00180 Bush 16 mm Suit all 16 mm Page Superior slasher blades with 32 mm Hole. S5069 BSA-PG1113 S5067 Nut Nyloc

Superior Hex. Head bolt kit 16 mm blades

BSA-08044 Kit comprises:BSA-PG1112 Bolt Hex. Head High Tensile. 1500 BSA-00180 Bush 16 mm Suit all 16 mm Page Superior slasher blades with 32 mm Hole. S5069, 1617, 1924 BSA-PG1113 S5067 Nut Nyloc

Superior / Page Bushes

BSA-00180 (S5069) Bush 16 mm Suit all other Page Superior slasher blades BSA-00179 Bush 10 mm Suit BS-1938/10 BSA-00175 Bush 7 mm Suit BS-01586

Superior Beams

BSA-S4058 BSA-S2112 BSA-S6058 BSA-S2113 BSA-S7060 BSA-S7058 BSA-1496 BSA-4411 BSA-5496 BSA-5411 (S4058) (S2112) (S6058) (S2113) (S7060) (S7058) (1496) (4411) (5496) (5411) 75 x 8 x 690 75 x 10 x 690 75 x 8 x 990 75 x 10 x 990 75 x 10 x 1300 75 x 8 x 1300 75 x 8 x 990 75 x 8 x 990 75 x 8 x 1300 75 x 8 x 1300 4', 4'6" Rd 4' & 4'6" Sq 6' Rd Hole 6' Sq Hole 7' Sq Hole 7' Rd Hole 6' Rd Hole 6' Sq Hole 7' Rd Hole 7' Sq Hole

Page Beams (146 mm Ctrs) Superior Spacer Bars

BSA-S6081 BSA-S7059 S6081 S7059 75 x 16 75 x 16 6' Spacer bar 7' Spacer bar. LX7

Page Spacer Bars

BSA-1383 BSA-4597 (1383) (4597) 75 x 16 75 x 16 6' Spacer Bar 7' Spacer Bar

Superior Finishing Mower

BR-03693 Step 14 mm LH S3693

Use Bolt kit BRA-08088

Superior Clutch Disc

BSA-S4027 Clutch disc s4027 165 x 64 x 3.2

W 65

T 5

L 195

H 20

NOT SURE WHAT SIZE BUSH YOU WILL NEED ? BUSH QUICK - REFERENCE TABLE

Note:

Ride on blade length is measured end to end. Slasher blade length is measured from centre of bolt hole Flail length is the spinning radius

PAGE 29

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

PARTS (By Individual Manufacturers)

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

26

W T L Hole 65 8 635 19

Toro

Part No.

Description

72" 300, 322D, 325D, 327, 345. Step 10 mm Side & Rear throw Heavy Duty 29-5530. 3 per set 72" 300, 322D, 325D, 327, 345. Step 10 mm Side & Rear throw Std. Duty 29-5530. 3 per set 72" Step 6 mm Rear throw. Groundsmaster / Z Master. 217D, 220D 93-4982 3 per set 62" Step 6 mm Side throw Groundsmaster / Z Master 44-6250 3 per set Also 4000D 7 per set--132" 92-5608 106-7166 Fits 455D, 4100D, 4100 Step 5 mm 7 per set. 124" & 126" Decks 16' Groundsmaster 580D. 69-6920 11

BR-03843 BR03843SD

65

6

635

19

BR-06271

65

6

640

13

BR-06251

NEW

65

6

546

13

BR-08552

65

6

483

13

BR-0580D per set Step 5 mm

84" Groundsmaster 4 per set

65

6

508

16

BR345447 BR345454 BR941861 BR562390 BR147799

NEW

38" Step 15 mm Side throw 57-4700 Time Cutter 2 per set 44" Step 7 mm Side throw. Mid mount. 55-4940 3 per set. Groundsmaster 117 & 1144 rider. Time Cutter 72" Step Groundsmaster / Z Master RH. 94-1861, 93-4982, 85-6040. 3 per set 3000 Series 52" & 36". Flat 56-2390, 27-0990 2 per set 36", 3 per set 52". Groundsmaster 52" 38" Mulcher. RH. 14-7799, 79-3060, 790361. 2 per set 48" Z400 Z450 Z MASTER 107-319-203 689-306 72" Diesel Z Master 1031581 Step 9 mm 60" Diesel Z Master 1031582 Step 9 mm 60" Z 500. 105-7715 WITH HOLDER 72" Z 500 105-7711 WITH HOLDER 44" Z MASTER 107-1742 WITH HOLDER 52" TIME CUTTER 106-2174 52" Z593D 453 MODEL

65

4.8

490

16

65

4.8

394

16

65

6

626

13

65

5

457

13

65

6

490

16

BR-08407 BR031581 BR031582 BR-08210

63

6

417

16

65

6

615

16

65

6

515

16

64

6

520

16

BR-08207

64

7

620

16

BR-08187

NEW

64

4.8

394

16

BRD18037 BR-08463

65

6

457

16

NEW

42" TIME CUTTER 106-2247, 106-8744

60

4

547

16

NEW

BR-08515

72" Groundsmaster 3280 & 3320 110-0621 60" Groundsmaster 3280 & 3320 110-4701

65

6

615

13

NEW

BR-08516

65

6

515

13

BM-V100LHK Universal LH blade tip kit comprising 60 off blades, nuts, bolts & washers

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

BM-V100LH BMA-08059 BMA-08060 BMA-08061

Blade Bolt Nut Washer

Please use product numbers in bold type when ordering

27

Toro Blade Bolt

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

Grasscare & Flail Mower Replacement Parts

Toro Tension Washer

BRA-261820 Blade bolt for 325D 26-1820 BRA-261990 Blade Tension Washer 26-1990

Toro belts

BB-08469 BB-08179 BB-08040 BB-08140 BB-08135 BB-08133 Drive belt for 72" Groundsmaster 53-9660 2/A40 Deck belt 72" Groundsmaster 21-0890 . B70 Deck belt 72" Z Master 57-0240 B144 Blade belt 38" XL 88-6250. A85 Drive belt 42" & 48" Side discharge. 10-2742. A100, 6378 Blade belt suit 42" Side discharge. 6738. A84

Toro Blade Nut

BRA-32207 Half Nut OEM: 9150906 3220-7, 32146-20

Universal

BM-V100LH BLADE LH 5 mm step BM-V100RH BLADE RH 5 mm step Requires Bolt, Nut, Washer kit BMA-08062 BM-V100LH KIT 60 off blades, LH, bolts, nuts & washers BM-V100RH KIT 60 off Blades, RH, bolts, nuts & washers W 65 T 3 L 120 H 13

Universal bolt kit

BMA-08062 Fastener kit. Suits Universal mower tips. BMA-08059 BMA-08060 BMA-08061 Bolt (1) Nut (1) Washer (1)

Victa

BD-08006 Blade (2) 1974 + Rear catcher models. OEM: CAO9306. CAO9393S BD-08006BK Bolt kit (2)

W 44

T 2

L 96

H 14

Tri-Max Stealth & Rolla Mower

BR-78016 Blade Flat BR-78241 Blade Fluted BR-78016K Blade kit Flat 12 off 78016 & fasteners. BR-78241K Blade kit Fluted 12 off 78241 & fasteners. BR-08284 Blade kit Fluted 60 off 78241 blades & fasteners. BMA-08065 W 50 T 3 Fastener kit only. L 100 H 13

Tri-Max Tip Bolt Kit

BMA-08065 Bolt, Nut, Washer kit Suits BR-78016 & BR-78241 Tri-Max Rolla mower & Stealth mowers. BMA-08063 BMA-08064 BMA-08061 Bolt (1) Nut Coneloc (1) Washer (1)

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

PARTS (By Individual Manufacturers)

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

28

W T L Hole

Victa & Viking

Part No. BR335764 BR335012 BR335030

Description

42" uses 2 per set Step 12 mm 92418E701

57

4.7

540

21.5

40" uses 2 per set Step 12 mm 91871E701

57

4.7

518

21.5

38" uses 2 per set Step 12 mm 92002E701

57

4.7

495

21.5

Walker

Part No.

Description

42" RH Side discharge 5705-3 1 BR-355032 & BR-355024 per set 62" Uses 3 per set 42" LH Side discharge 5705-4 1 BR-355032 & BR-355024 per set 48" RH 7705-1 1 BR-08223 & BR-08222 per set 48" LH 7705-2 1 BR-08223 & BR-08222 per set

W

T

L

Hole

BR355024

70

5

559

5.5/16/5.5

BR355032

70

5

559

5.5/16/5.5

BR-08223

70

4.1

636

5.5/16/5.5

BR-08222

70

4.1

636

5.5/16/5.5

Walker Bolts & Nuts

BRA-08236 Nut BRA-08237 Washer flat BRA-08238 Washer Spring

ASP's 3 month Replacements Parts Warranty

All ASP replacement parts carry a warranty against defects in material and workmanship for 3 months from the date of purchase. This warranty is subject to normal wear and tear.

BRA-08239 Bolt shear BRA-08240 Nut shear

ASP `LIGHTNING' TRIMMER LINE AND HEADS ARE A CONTRACTOR QUALITY RANGE EXCLUSIVE TO ASP DESIGNED FOR THE GRASS CARE PROFESSIONAL. FOR MORE INFORMATION TURN TO PAGE 32..

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

29

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

Grasscare & Flail Mower Replacement Parts

FULL LENGTH WELDERS GLOVES

HEAVY DUTY GLOVES NOW AVAILABLE DIRECT FROM ASP See Page 44..

RIGGERS/DRIVERS GLOVES

Waratah

BS-07161 Blade Heavy Duty Step 47 mm Bolt Nut kit Bush BSA-07453K BSA-07161B

See the ASP flail range on page 30

W 100

T 10

L 331

H 38

PLEASE NOTE: ALL SLASHER BLADE LENGTHS ARE TAKEN FROM THE CENTRE OF THE HOLE TO THE END OF THE BLADE

Waratah

BS-07453 Blade Std Duty Step 47 mm Bolt Nut kit Bush BSA-07453K BSA-07161B

Western, Fewing Slasher

BS-01586 Blade L6, S3608 22 mm Step Bolt Nut Bush kit Bush Bolt Nut W 65 T 7 BSA-08089 BSA-00175 BRA-100196 BSA-100285 L 250 H 25

W 75

T 8

L 331

H 38

Our extensive range of Quality Wear Resistant Parts and Accessories for Grasscare Machinery and Agricultural Equipment has been developed to help councils departments, grass contractors, farmers and grass care professionals reduce their running costs and maximise their profits. Using ASP's range of quality assured replacement parts, backed by $10,000,000 product liability insurance, you'll benefit from excellent prices, maximum wear life, with a fast and efficient delivery - all dedicated to the needs of the professional.

BUSH QUICK REFERENCE TABLE

Part No BSA-01074 BSA-06394B BSA-02003B BSA-07161B BSA-01073 BSA-00178 BSA-00179 BSA-00185 O/D 45 38 38 37 35 32 32 use I/D 25 22 19.5 22 22 19 20 00179 Thick 14 11 14 13 14 11 14

ALL ASP BUSHES ARE CASE HARDENED FOR MAXIMUM LIFE

Part No BSA-00180 BSA-00184 BSA-00177 BSA-01981B BSA-00175 BSA-07664 BSA-07659 BSA-04457B

O/D 32 use 27 25 25 18 22 25

I/D 20 00180 11 19 16 14 16 19

Thick 17

15 11 9 6 10 9

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

Flail Quick Reference Guide

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected] Part No. BS-06943 BS-08001 BS-08291 BS-08471 "L" type BM-336003 BS-08009 BS-1781000 BS-08303 BS-08304 BS-08490 BS-08491 BS-279003 W (mm) 65 50 50 50 40 65 40 60 45 60 60 60 T (mm) 10 10 10 10 5 10 8 8 8 8 8 10 L (mm)

From centre of hole

30

H (mm) 25 20.5 20.5 20.5 14.5 17 16.5 25.5 16.5 26 26 25 L (mm)

Overall

171 120 166 120 115 171 123 190 120 115 115 171

204 145 195 145 135 204 143 220 142 145 145 204

BS-279005 BM-100759 BM-100759HD BM-102086 BM-181024

60 45 40 32 40 RADIUS (mm)

10 3 5 3 12 CUTTING FACE (mm) 150 137 120 120 70 75 80

171 65 65 115 70 HOLE (mm) 20.5 16.5 16.5 16.5 31 31 35

25 13 x 27 14 x 26 9 16 x 36 KNUCKLE WIDTH (mm) 55 40 40 40 60 80 80

204 88 88 125 102

CI-11/20 CI-06/16 CI-1400 CI-1401 CI-FMB14 CI-08496 CI-08035

90 95 110 90 80 80 115

CI-FMB003

85 L, 70 H

41 W

16 x 32

CI-1387

135

60

25

38

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

31

Turf Care Parts

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

Turf Care Parts

ASP turf cutters are the only blades available in Australia made entirely from European boron steel. Both side plates and bottom blades are through hardened for maximum hardness and operational life. Our blades are used by Original Equipment Manufacturers in Europe. The blade cutting edge is sharpened with a double bevel to ensure the cutting edge is maintained even in difficult stony areas.

BTC16-8 BTC16-8-F BTC18-8F-1 BTC-18-8-1 BTC-08093 BB-2-A64

16" Angled Blade suit Van Vuuren & Brouwer machines 16" Flat Blade suit Ryan machines 18" Flat Blade suit Ryan machines 18" Angled blade suit Brouwer Bolt & Nut kit (100 off each) V Belt Ryan

Also available with fingers. Please inquire when ordering

Jarrett

BS-43751 BLADE (OEM:43751) Requires Bolt & Nut kit BSA-43752 W 50 T 4 L 105 H 20.5

Jarrett & Saliba

Sammut

BSA-43752 Fastener kit

BSA-08036 Fastener kit

Sammut

NEW

Sammut

BM-V100LLH BLADE LH BM-V100LRH BLADE RH Requires Bolt & Nut kit BSA-08036

BM-08577 BM-08578

BLADE LH BLADE RH

Requires Bolt & Nut kit BSA-08036 New type 16 mm step & 4 mm thick W 65 T 4 L 120 H 18.5

W 65

T 3

L 120

H 18.5

Saliba

BS-SAL162L BLADE LH BS-SAL162R BLADE RH Requires Bolt & Nut kit BSA-43752

Saliba

NEW

BS-08579 BS-08580

BLADE LH BLADE RH

Requires Bolt & Nut kit BSA-43752 New type 65 mm wide.

W 50

T 5

L 140

H 20.5

W 65

T 5

L 140

H 20.5

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

Grounds Maintenance Parts

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

32

CON TR QUA ACTOR LITY !

ASP "LIGHTNING" TRIMMER LINE

This contractor quality trimmer line is available

in both round and square sections and in economical 1 lb, 3 lb, and 5 lb rolls. ASP Trimmer line rates as one of the densest monofilaments available in the grass care industry in Australia, to guarantee you outstanding wear resistance and flexibility. ASP Trimmer line is suitable for use with any type of trimmer head and in all types of commercial applications.

ASP Trimmer Line - Square

Part no. Square BM-834 BM-835 BM-836 BM-837 BM-838 BM-839 BM-840 BM-841 BM-842 BM-862 Size mm 2.40 2.70 3.00 2.40 2.70 3.00 2.40 2.70 3.00 4.00 1 lb (450gm) Donut 67M 1 lb (450gm) Donut 52M 1 lb (450gm) Donut 42M 3 lb (1.35Kg) Bulk roll 202M 3 lb (1.35Kg) Bulk roll 155M 3 lb (1.35Kg) Bulk roll 126M 5 lb (2.25Kg) Bulk roll 337M 5 lb (2.25Kg) Bulk roll 258M 5 lb (2.25Kg) Bulk roll 210M 5 lb (2.25Kg) Bulk roll 117M Description Part no. Round BM-813 BM-814 BM-815 BM-816 BM-817 BM-818 BM-819 BM-820 BM-821 BM-822 BM-860

ASP Trimmer Line - Round

Size mm 2.40 2.7 3.00 2.40 2.70 3.00 2.40 2.70 3.00 3.30 4.00 1 lb (450gm) Donut 81M 1 lb (450gm) Donut 67M 1 lb (450gm) Donut 54M 3 l b (1.35Kg) Bulk roll 243M 3 lb (1.35Kg) Bulk roll 202M 3 lb (1.35Kg) Bulk roll 162M 5 lb (2.25Kg) Bulk roll 405M 5 lb (2.25Kg) Bulk roll 337M 5 lb (2.25Kg) Bulk roll 270M 5 lb (2.25Kg) Bulk roll 230M 5 lb (2.25Kg) Bulk roll 144M

NEW

Description

Trimmer Head Arbors

ASP stock a wide range of arbours to adapt to most popular brush cutters.

ASP "LIGHTNING" TRIMMER LINE WIDE RANGE OF SIZES -------- CONSISTENT SHAPE -------- DOES NOT SPLIT -------- DESIGNED FOR AUTO FEED AND MANUAL HEADS -------- RESISTS ABRASION

Genuine Tanaka Alloy Multi Fit Head

BM-08019 Alloy Multi Fit Head 14 mm Centre hole Use BM-08020 reducer if 8 mm Centre required

Genuine Tanaka Alloy Multi Fit Head

BM-08027 Alloy Multi Fit Head. 25 mm centre hole Spool Type 4-Way Head, bolts on like a blade. Use BM 36200 Reducer if 20 mm Centre hole required

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

33

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

Grounds Maintenance Parts

Trimmer Head Bump Feed

BM-08058 Universal lighter duty, Bump feed Head Easy access to spool: Release opening system by pushing two tabs.

Trimmer Head-- Ryobi

BM-08255 RCT450, RCT2800, RCTA600, RCTA3100 AND OTHERS. Easy access to spool: Release opening system by pushing two tabs.

Trimmer Head Bump Feed

BM-08092 Contractor quality, Bump feed Head (Square Arbor)

Trimmer Head Manual

BM-08091 Contractor quality, Heavy Duty Manual Feed.

Trimmer Head Universal Bump Feed

BM-08212 2 Line universal semi automatic head. Dual system, Bump N Go & Manual No shaft bolt. Mounting procedure same as disc blade. Hold 13 Mt of line (if 2.4mm used) Fits 100% of brush cutters

G4 REACHER--LITTER PICKER

NEW

Trimmer Head Universal Semi Automatic

BM-08211 2 Line universal semi automatic head No shaft bolt. Mounting procedure same as disc blade. Hold 13 Mt of line (if 2.4mm used) Fits 100% of brush cutters

BM-08462 32" Long. Ideal for litter picking on foot. BM-08499 40" Long. Ideal for litter picking when seated on a ride on mower.

Edger Blades

Part No.

OEM No

Description Little Wonder (L129), Kawasaki, MTD, Atom, Masport, Toro Victa Tiltacut Heavy Duty Sharpened 4 sides Victa Tiltacut Extra Heavy Duty Sharpened 4 sides ATOM Cross Blade. (2 Piece) ATOM Cross Blade. (1 Piece) Boron Heavy duty ATOM Cross Blade. (1 Piece) Boron Standard duty

W

T

L

Hole

BM-802310

L129

45

3

250

13

BM-802720

ME 63222G

50

3

250

16

BM-375170 BM-43105 BM-08326

ME63222 43105

50 48 48

5 3 3.3

250 268 268

16 12 12

NEW

BM-08565 ASP-1069 T1679

48

2.50

268

12

Gyral edger disc 13" diameter

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

Sugar Cane harvester Blades

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

34

SUIT MOST SLASHERS

COLD FORGED PINS IMPLEMENT MOUNTING PINS

BSA-08264 CATEGORY 1 = 22MM, 3/4 UNF (19MM)

TOP LINK PINS

BSA-08265 CATEGORY 1 7/8 (100MM USABLE LENGTH)

(Usable length is from under the head to the centre of the hole) MIN. STEEL SPEC. IS S1040--ZINC PLATED

`R' CLIPS

BSA-08259 BSA-08260 BSA-08261 BSA-08262 BSA-08263

2.5MM 3.0MM 4.0MM 5.0MM 6.0MM PACK X 10 PACK X 10 PACK X 10 PACK X 10 PACK X 10

LINCH PINS

BSA-08256 6MM PACK X 6 BSA-08257 8MM PACK X 6 BSA-08258 11MM PACK X 6

Notes:

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

35

DISC SPECIFICATIONS

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

Grounds maintenance Parts

Agricultural Discs & Coulters

CF3 CF4 CP3 CP4 CS3 CS4 DCH FBP FBS

COULTER FLUTED DOUBLE BEVEL COULTER FLUTED SINGLE BEVEL COULTER PLAIN DOUBLE BEVEL COULTER PLAIN SINGLE BEVEL COULTER SCALLOP DOUBLE BEVEL COULTER SCALLOP SINGLE BEVEL DUAL CENTRE HOLE FLATBACK PLAIN FLATBACK SCALLOPED

NCH PCD RBP RBS RCH RFBP RFF SCH

NO CENTRE HOLE PITCH CIRCLE DIAMETER ROUNDBACK PLAIN ROUNDBACK SCALLOP ROUND CENTRE HOLE REVERSE FLATBACK PLAIN ROUND BACK FURROW FILLER SQUARE CENTRE HOLE

MAKE OF MACHINE

AITCH ALFM BNL BH BR BT CH CL CA CS CW AITCHISON ALFARM BONEL - P & H BUSH HOG BIG RIG BETTINSON CHAMBERLAIN CLOUGH CASE CONNOR SHEA COUNTRY WIDE Part No. Gauge Style D DB E ES EZ GZY GR GN HGE HB HT Dish DUNCAN DAVID BROWN ENNOR ENG. EASY-FIX EZEE-ON GRIZZLY GIBBONS GESSNER HODGE H-BAGSHAW HOLDEN HT HUB Centre Hole

Shape Size Qty

HU IH JA JB JD JK KEL KRS MA MF MH

HUTCHMASTER INT. HARVESTER JARRETT JOHN BERENDS JOHN DEERE JANKE KELLOW KRAUSE MANNUM AG. MASSEY FERG. MURRAY Radial Holes

Dia PCD

MIL MSW NG SH SOV STG TW TNR W WK Y KG

MILLER MOURILYN NAPIER GSHEARER SOVEREIGN STEIGER TAYLORWAY TOWNER WILLETT WALKER YEOMAN Application

PLAIN 13"

12284 1069 4 4 RFBP RBP 32 27 NCH RCH 52 5 5 6.75 7 93.8 94 2.27 2.27 CS 450, SH Gyral E21 edger T1679

PLAIN 13 3/4"

3C 5 RBP 30 NCH 6 7 108 2.53 PIONEER

SCALLOP 16"

1308 4 RBS 35 SCH 30 3.7 MACMARK

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

Agricultural Cultivation Parts

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected] Part No. Gauge Style Dish Centre Hole

Shape Size Qty

36

KG Application

Radial Holes

Dia PCD

SCALLOP 18"

6C 5 RBS 56 DCH 30 33 7.00 NG, JA, BNL

SCALLOP 20"

1125 12C 18C 4 4 5 RBS RBS RBS 51 68 51 RCH DCH DCH 70 27 30 27 30 4 13 137 6.08 6.08 7.69 GRIZZLY GRUMPY SH, JA, BNL, NG, GR SH,JA,BNL

SCALLOP 22"

34C 40C 44 43 42C 41C 4 5 5 5 5 5 RBS RBS RBS RBS FBS RBS 84 70 63 70 54 64 SCH DCH RCH RCH DCH DCH 30 40 41.5 70 70 27 & 30 30 & 33 4 6 18 17 137 112 8.38 9.06 9.06 9.06 9.06 9.06 JA, DB GS, CQ GZY (GRUMPY) CS (BABY GIANT) IH 3-4, MF, MH NG340, HGE, BNL, JB

PLAIN 24"

64 84 88 86 80 81 85C 4 5 5 5 5 5 5 RBP RBP RBP RBP RBP RBP RBP 94 94 84 84 84 84 76 SCH SCH DOME NCH RCH SCH DCH 27 32 40 41.5 33 33 6 3 6 4 13 17 12 13 203 184 165 179 9.25 12.24 12.24 12.24 12.24 12.24 12.24 CA, CH CS, CH CS (SERIES 1, 2,3) CS (SERIES 4) SH 5GP IH 1-6 SH, HB, IH, BH, NG 710740

WELDERS GLOVES

ENG-5225FF

Heavy Duty Full length welding gloves

TREELOPPERS / WOODCHIPPERS GLOVES

ENG-51154-S

PROTECT YOUR EYES AT ALL Re enforced Knuckles TIMES WITH ASP & Palms

See Page 44

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

37

Part No. Gauge

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

Agricultural Cultivation Parts

Style Dish Centre Hole

Shape Size Qty

Radial Holes

Dia PCD

KG

Application

SCALLOP 24"

92C 99 101C 100C 102 103 104 5 6 6 6 6 6 6 RBS RBS RBS RBS RBS RBS RBS 76 73 76 76 76 84 76 DCH RCH DCH DCH DCH RCH RCH 30 33 70 40 41.5 30 33 54 60 70 78 6 6 17 22 112 190 4 18 137 10.43 14.24 14.24 14.24 14.24 14.25 14.24 SH, NG 690 GZY (GRUMPY) HGE, BNL, NG, IH, JA, SH, GR HGE, BNL, NG, JD, SH, BH IH 3-5, SH 700 CS (BABY GIANT), CS 710, 760 CS (LITTLE GIANT), BNL

PLAIN 26"

122 119 121C 118 126C 5 5 5 5 6 RBP RBP RBP RBP RBP 89 89 90 100 81 RCH SCH DCH RCH DCH 27 33 40 41.5 25 40 41.5 4 13 228 6 12 165 14.65 14.65 14.65 14.65 17.48 SH 5GP CH SH(SOV),JA, CS 570, HGE, BNL, IH HGE, BNL, NG 670, 710740

SCALLOP 26"

142C 138 141C 152-6 139 160C 140 143C 1322 6 6 6 6 6 6 6 6 6 RBS RBS RBS RBS RBS RBS RBS RBS FBS 67 67 81 81 89 91 91 91 76 SCH RCH DCH RCH RCH DCH RCH DCH SCH 40 & 41.5 130 40 & 41.5 52 100 30 & 33 78 54 & 60 40 6 22 190 6 22 185 4 13 228 16.78 16.78 16.78 16.78 16.78 16.78 16.78 16.78 16.78 NG, JA, TW BNL TRASH INCORP. HGE, BNL, NG670, 710740, JA CW, KEL, STG GZY JD, HGE, BNL, BH CS LTLE GIANT CS780, E, BNL SH 700, IH 3-5 IH, 770, 590, 501

Too many discs sold in Australia are made from high carbon steel, some are made in India, and when these are compared to ASP discs, they are soft. ASP discs are neither expensive nor soft, they are amongst the finest, longest wearing discs made in the World and when made harder will guarantee maximum working life and value for money.

All parts listed are supplied to fit machines indicated and are not sold as genuine parts Please use product numbers in bold type when ordering

Agricultural Cultivation Parts

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected] Part No. Gauge Style Dish Centre Hole

Shape Size Qty

38

KG Application

Radial Holes

Dia PCD

SCALLOP 26"

154C 151 1263 152 153 144 8 8 8 8 8 6 RBS RBS FBS RBS RBS RBS 81 89 76 95 100 90 DCH RCH SCH RCH RCH RCH 40 & 41.5 100 40 52 78 70 6 6 22 18 190 113 6 22 185 20.62 20.62 20.63 20.62 20.62 20.62 HGE, BNL, NG, ALLIS, JA GZY IH, 770, 590, 501 STG, EZ, CW CS 780, CS (LIT. GIANT), BNL, E

PLAIN 28"

163 6 RBP 106 SCH 33 5 12 210 20.02 MF

SCALLOP 28"

161 166C 167C 168S 170 175C 179 168 178 171 6 6 6 6 6 8 8 8 8 8 RBS RBS RBS RBS RBS RBS FBS RBS RBS RBS 67 67 94 106 106 94 95 106 94 106 RCH DCH DCH RCH RCH DCH SCH RCH RCH RCH 130 40 41.5 40 41.5 100 78 40 41.5 40 100 52 78 6 22 190 6 22 185 6 6 22 22 185 190 4 13 228 19.50 19.50 19.50 19.50 19.50 25.00 25.00 24.40 25.00 24.40 BNL TW NG HGE, BNL, NG 670, JA, SH GZY E, BNL, CS) CS, HGE, BNL, MSW IH 770 GZY CW E, BNL, CS

SCALLOP 32"

193C 10 RBS 112 DCH 59sq/ 62rd 39.00 ALFARM 080, TNR620

Notes.

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

39

Part No. Dia

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

Agricultural Cultivation Parts

Gauge Style Centre Hole

Shape Size Qty

Radial Holes

Dia PCD

KG

Application

FILLER 22" 1378 COULTERS 6195 6196-4 6198 1212 1240 1241 1117 1118 6408 6407 6200 1011 1171 1061AD 08512 08513 6668 6670 6671 6766 6766/8 10.8" 12" 13.5" 14" 15" 15" 15" 15" 16' 16" 18" 18" 20" 22" 22" 22" 26" 26" 26" 30" 30" 3 4 3 4 4 4 4 4 4 4 5 5 6 5 6 6 6 6 6 6 8 CP3 CP3 CP3 CP3 CP4 CS4 CS4 CS4 CP4 CP3 CP4 CF3 CP4 CS3 CP3 CP3 CP3 CP3 CP3 CP3 CP3 RCH RCH RCH RCH RCH RCH RCH RCH RCH RCH RCH RCH RCH RCH RCH RCH RCH RCH RCH RCH RCH 72 52 72 55 38 38 45 45 25 64 77 64 64 74 63 75 50.8 102 64 51 51 5 5 5 5 6 6 6 6 6 5 4 5 5 6 5 6 4 8 5 4 4 9 10 9 12 8 8 9 9 7 13 10.3 13 13 13 12 13 14 12 13 18 18 95 95 95 95 76 76 76 76 73 108 112 108 108 105 108 105 165 292 108 165 165 17.5 17.5 17.5 24 32 1.70 3.00 2.20 3.00 3.50 3.50 3.50 3.80 4.8 4.8 7.5 7.5 10 CS 470 DRILLS (STD) AGROPLOW CS (470, 800 DRILLS) AGROWPLOW 191-038 PHM PHM F.B. 15 NOTCH AGROWPLOW F.B. 11 NOTCH AGROWPLOW MASON Y, HT, GN JOHN DEERE Y FLUTED HT ROOT CUTTER NVI (SCALLOPED) NVI NVI HODGE P&H Y, HT, GN HODGE HODGE 6 51 RCH 100 6 22 185 GRIZZLY

Notes.

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

Agricultural Cultivation Parts

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

40

U Bolts

AR-315031K AR-315032K AR-315033K 7"x7"x3/4" 7"x7"x7/8" 6"x4"x3/4"

Cultivator Shank

AR-01512 50 x 25 x 530 mm Grade 8.8, Complete with nuts and spring washers, gold passivated, and hydrogen deembrittled for maximum life. Suits Yeoman, Berends, Waratah, Jarrett style cultivators.

Reversible Point - Nth American Chisel Ploughs

AS-01322

Reversible Point - Coil tines

AS-01317 40 x 12 x 300 AS-01319 50 x 16 x 300 REVERSIBLE POINT

REVERSIBLE POINT 7/16 - 1/2" BOLT ON 51 CTRS 50 X 16 X 500 2 x 1/2" BOLT ON 57 CTRS FOR COIL TINES

Universal Ripper

AS-01349

ASP HAS A HUGE RANGE OF HIGH TENSILE FASTENERS AVAILABLE.

UNIVERSAL RIPPER POINT 62.5 x 20 x 300 4 OFF 1/2" HOLES & SLOTS FOR 51-112 CTRS

JSL 542-025 NAPIER / FORD

Point Reversible - 65 x 13

ASP SAFETY ACCESSORIES

AS-01329 REVERSIBLE POINT 65 x 13 x 406

1/2" BOLT HOLES ON 57 CTRS BERENDS, JARRETT,YEOMAN

PAGE 44

IF YOU ARE NOT QUITE SURE WHICH PARTS YOU REQUIRE CALL US AND SPEAK TO ONE OF OUR HELPFUL STAFF ANYTIME BETWEEN 8AM AND 5PM, MON - FRI

07 3881 3464

ASP DELIVERS AUSTRALIA WIDE

All parts listed are supplied to fit machines indicated and are not sold as genuine parts Please use product numbers in bold type when ordering

41

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

Agricultural Cultivation Parts

Coil Tines. 32 m Square & 25 mm Square

AR-01488

25 mm Square LH VERT.

Clamps & Wedges

AR-01489

25 mm Square RH VERT.

AR-01476

32 mm Square LH VERT.

AR-01477

32 mm Square RH VERT.

AR-01468

32 mm Square LH FRONT

CLAMPS

AR-04273 AR-04274 AR-04277 AR-04278 AR-04279 AR-01495 AR-01496 AR-03896 1 1/4" TINE TO 2 1/2" BAR Use wedge AR-04283 SPREADER 2 1/2" BAR 1 1/4" WEDGE Use wedge AR-04283 1 1/4" TINE TO 2" BAR Use wedge AR-04283 SPREADER 2" BAR 1 1/4"WEDGE Use wedge AR-04283 1" TINE TO 2" BAR Use wedge AR-04285 SPREADER 3 1/2" BAR 1 1/4" WEDGE Use wedge AR-01497 1 1/4" TINE TO 3 1/2" BAR Use wedge AR-04346 1 1/4" TINE TO 100 mm BAR Use wedge AR-04346 SPREADER 100 mm BAR 1 1/4" WEDGE Use wedge AR-04346

AR-01469

32 mm Square RH FRONT

AR-01481

25 mm Square RH FRONT

AR-01480

25 mm Square LH FRONT

3 X 1 Shanks

AR-06964

WEDGES

AR-07875 855 mm long Straight Shank Suite Gessner Standard shank drilled one end with 2 off set holes only. AR-04283 AR-04346 AR-01497 AR-04285 32 x 220 32 X 285 32 X 220 25 X 195

Rigid Tine

AR-01107 32 Sq x 785 mm 2x7/16" Holes on 46-53 Ctrs. For sweeps etc..

Rigid Tine

AR-01536 32 SQ X 740 mm 3 x 3/8" holes. 32-57 Ctrs. For Beet Knife etc..

ASP AGRICULTURAL DISCS & COULTERS

A PROVEN PERFORMER IN ALL AUSTRALIAN CONDITIONS EXTREMELY COMPETITIVE PRICES SAME DAY DESPATCH IF IN STOCK TURN TO PAGE 35 FOR MORE DETAILS

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

Agricultural Cultivation Parts

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

42

AR-01539

Crescent Knives 10 mm

Friction Trip

AR-05460 Crescent Knife LH. AR-05459 Crescent Knife RH.

Suit 75 mm x 25 mm Tine. 1x20 mm & 1x18 mm Hole on 115 Centres. Use Hardware kit AR-06370

NON-INVERSION CAST DEEP TILL SHANK ASSEMBLIES & PARTS

Suit 4" (100 mm) tool bars.

24' SHANK 30" SHANK POINT 4" CARRIER 4" CLAMP SHIN GUARD SHEAR PIN 24" LEG ASSY COMPLETE 30" LEG ASSY COMPLETE PIN CLIP ACAG-001 ACAG-030 ACAG-003 ACAG-012 ACAG-013 ACAG-015 ACAG-014 ACAG-024 ACAG-031 ACAEN-761

Assemblies are supplied complete, ready to bolt on to your tool bar.

PIN CLIP ACAEN-761

POINT ACAG-003 SHIN GUARD ACAG-015

FRONT BACK

SHEAR PIN ACAG-014

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

43

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

Agricultural Cultivation Parts

ROTARY HOE BLADES - TO SUIT HOWARD

Part No. RH-08105 RH-08106 RH-08007 RH-08008 RH-08110 RH-08111 RH-08112 RH-08113 Description LH BLADE = 63604 POWER RH BLADE= 63605 LH BLADE = 9862 POWER RH BLADE= 9863 LH BLADE = 9950 SPEED RH BLADE= 9951 LH BLADE = 9910 RH BLADE= 9911 LONG SHANK POWER Type Dimensions A=173 mm B=142 mm A=175 mm B=140 mm A=210 mm B=145 mm A=210 mm B=137 mm Hole Dia 1/2" Hole Centres 57 mm Thick

HOE BLADES ARE SUPPLIED IN BOXES OF 10 EACH HAND

8 mm

8 mm

POWER

5/8"

51 mm

8 mm

8 mm

SPEED

ROTARY HOE BLADES - TO SUIT CELLI

Part No. Description LH BLADE "A" SERIES SPEED RH-08115 RH-08386 RH-08387 RH-08116 RH-08117 RH-08388 RH-08389 RH-08243 RH-08244 RH-08390 RH-08391 RH-08392 RH-08393 RH BLADE "A" SERIES LH BLADE "A" SERIES RH BLADE "A" SERIES LH BLADE "E-HV-H.F." RH BLADE "E-HV-H.F." LH BLADE AG SERIES SPEED RH BLADE AG SERIES LH BLADE G-K SERIES SPEED RH BLADE G-K SERIES LH BLADE CE SERIES SPEED RH BLADE CE SERIES LH BLADE CE SERIES POWER RH BLADE CE SERIES POWER POWER Type Dimensions Hole Dia 1/2" Hole Centres 50 mm Thick

RH-08114

A=173 mm B=142 mm A=173 mm B=142 mm A=205 mm B=130 mm C=20 mm A=164 mm B=110 mm C=21 mm A=195 mm B=135 mm C=20 mm A=195 mm B=136 mm C=20 mm A=195 mm B=136 mm C=20 mm

6 mm

Dimensions

1/2"

50 mm

6 mm

14.5 mm

57 mm

8 mm

12.5 mm

40 mm

6 mm

14.5 mm

57 mm

8 mm

14.5 mm

50 mm

7 mm

Bolt & Nut sets High Tensile

5/8" Hole use RHA-08118 1/2" Hole use RHA08119

14.5 mm

50 mm

7 mm

ROTARY HOE BLADES - TO SUIT MASCHIO

Part No. RH-08394 RH-08395 RH-08396 RH-08397 RH-08398 RH-08399 RH-08400 RH-08401 RH-08402 RH-08403 RH-08404 RH-08405 Description LH B-BI-C-SC TERANOVA SPEED RH B-BI-C-SC TERANOVA LH B-BI-C-SC TERANOVA RH B-BI-C-SC TERANOVA LH BLADE G SERIES RH BLADE G SERIES LH BLADE G SERIES RH BLADE G SERIES LH BLADE S SERIES RH BLADE S SERIES LH BLADE S SERIES RH BLADE S SERIES POWER SPEED A=225 mm B=145 mm C=25 mm POWER SPEED A=257 mm B=142 mm C=30 mm POWER A=215 mm B=140 mm C=25 mm 14.5 mm 56 mm 8 mm Type Dimensions Hole Dia Hole Centres Thick

14.5 mm Hole use RHA-08419 16.5 mm Hole use RHA-08420

16.5 mm

68 mm

10

16.5 mm

56 mm

8 mm

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

44

SAFETY & WORKWEAR WELDERS GLOVES

ENG-5225FF

Heavy Duty Full length welding gloves

TREELOPPERS / WOODCHIPPERS GLOVES

ENG-51154-S

Re enforced Knuckles & Palms

UNISAFE UNIVERSAL EARMUFFS

ENG-08269

Robust ABS plastic cups Super soft non-allergenic PVC ear cushions. Safe to use near electricity SLC80 29.3dB

UNISAFE UNIVERSAL EARMUFFS

ENG-08268

Light weight only 124g Safe to use near electricity SLC80 23.4dB

UNISAFE EARMUFF / VISOR COMBINATION

ENG-08270

Clear polycarbonate visor Suit high noise environments SLC 80 29.3dB

BILSOM 303 FOAM EARPLUGS

ENG-08274

Molded disposable, polyurethane foam plug. Smooth hygienic outer surface 10 pair per box

UVEX CYBRIC GLASSES

ENG-08273

Impact resistant polycarbonate dual lenses. Superior high-tec coatings providing highest UV protection Outstanding peripheral coverage from side impact Non-slip, soft and comfortable fit.

UVEX 9301 ULTRAVISION GOGGLES

ENG-08272

Anatomical shape & soft frame Integrated, indirect ventilation for protection against splash and dust Uv-extreme coated lenses (anti-fog coated)

FACE SHIELD & BROWGUARD

ENG-08271

Face shield complete with 200 mm x 300 mm clear visor & ratchet head band brow guard

OVERBOOTS

ENG-08278

H/W cotton drill boot top cover and sock saver. Available in navy blue.

CORDED UVEX FOAM EARPLUGS

ENG-08275 (10 pairs) UVEX corded ear plugs. Rated 25dB ALL ASP VISION ACCESSORIES COMPLY WITH AS 1337 STANDARDS ----------­ ALL ASP PROTECTIVE HEARING

G4 REACHER--LITTER PICKER

BM-08462 32" Long BM-08499 40" Long

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

45

ABRASIVES Grinding Wheel

ABR-08316 100 x 6.3 x 16 mm 4" x 1/4" x 5/8" BF80 15300 RPM MAX

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

Grinding Wheel

ABR-08317 125 x 6.3 x 22.23 mm 5" x 1/4" x 7/8" BF80 12200 RPM MAX

Grinding Wheel

ABR-08318 230 x 6,8 x 22,23 mm 9" x 1/4" x 7/8" BF 80 6600 RPM MAX

PREMIUM QUALITY GRINDING AND CUTTING WHEELS AVAILABLE AT ASP

MATERIAL SAFETY DATA SHEETS AVAILABLE ON REQUEST

Cutting Wheel

ABR-08312 100 x 2,4 x 16,0 mm 4" x 3/32" x 5/8" BF80 15200 RPM MAX

Cutting Wheel

ABR-08313 125 x 2,4 x 22,23 mm 5" x 3/32" x 7/8" BF80 12200 RPM MAX

Cutting Wheel

ABR-08314 230 x 3 x 22,23 mm 9" x 1/8" x 7/8" BF 80 6600 RPM MAX

Cutting Wheel

ABR-08315 350 x 3 x 25 mm 13 3/4" x 1/8" x 1" BF 1 Portable Saw 4200 RPM MAX

All parts listed are supplied to fit machines indicated and are not sold as genuine parts

Please use product numbers in bold type when ordering

Guarantees & Warrantees

To order contact ASP on Tel: 07 38813464 or Fax: 07 38813474 or [email protected]

46

About ASP ASP is a national distributor of Australian made and imported wear resistant parts to the Agricultural Ground Tool , Grass Care and Forestry Industries. Our products are used throughout Australia and SE Asia by Original Equipment Manufacturers, Agricultural / Grass Care Equipment Dealers, Local Council Authorities, Farmers, and Grass Cutting Contractors. Our principal suppliers are accredited to Quality Management system ISO 9001:2000, and apply World Class manufacturing techniques to their production processes. ASP blades at least achieve Original Equipment Specifications and in most cases exceed them.

3 month Replacement Parts Warranty

All ASP's replacement parts carry a warranty against defects in material and workmanship for 3 months from date of purchase. This warranty is subject to normal wear and tear.

Product Liability Insurance

ASP's Public/Product Liability Insurance policy, with Vero, CGU & Allianz Insurance Australia provides Public/Product indemnity of $ 10 million.

Parts Return

Parts are not sold on a trial basis and can only be returned if fully re-saleable, subject to a 15% restocking charge. However there may be occasions when you need to return items you have purchased. Ring one of our customer service team on 07 3881 3464 should this ever eventuate. When returning goods please enThe great majority of our blades and ground sure your details are clearly marked returned packtools are manufactured using a special Boron age. Specially produced parts may not be returned steel, produced in Europe, that allows ASP for credit. blades and discs to be made harder, "without them becoming brittle", and quite simply, the Disclaimer harder the blades and discs, the longer they Any reference to Original Equipment Manufacturers, last. ASP competitors, and their part numbers are for reference only. All parts listed are supplied to fit ma2 ware- chines indicated and are not sold as genuine. We stock all of our parts in a 600m house in Brisbane, and operate a fully computerised system that will ensure your orders are promptly and efficiently despatched. OrIMPORTANT ders for stocked parts will be available for despatch within 60 minutes of order accep- The information and specifications given in this tance by ASP, and transport arrangements catalogue is given in good faith as being correct and from our part of Brisbane to all Australian an accurate guide to ordering and correct part identitowns, are excellent. fication. Customers are nevertheless encouraged to thoroughly check for part number correctness before We normally use TNT Express or registered ordering, by verifying sizes, and models fitted, and Post for deliveries unless otherwise directed, OEM cross references to ensure any part ordered is please allow 2-3 days to QLD and NSW , 3-4 correct for your application. ASP reserve the right to days to VIC, NT and SA, and 4-5 days to WA upgrade specifications without prior notice. and TAS. © Alloy & Stainless Products Pty Ltd 2003. All rights reserved. No data, information, images etc in We have testimonials from Australian this catalogue may be copied, produced, stored on a Grass cutting contractors and Local Councils retrieval system, or transmitted in any form or by who have found ASP blades can last up to any means, without the prior written consent of 40% longer than ordinary spring steel blades. Alloy & Stainless Products Pty Ltd. Many agricultural disc users enjoy up to 20% improvement in wear life too when our products are compared with the high carbon discs Is a registered Trade Mark of commonly offered by our competitor ! Alloy & Stainless Products Pty Ltd.

All parts listed are supplied to fit machines indicated and are not sold as genuine parts Please use product numbers in bold type when ordering

TM

ASP PARTS CATALOGUE SEPTEMBER 2006

REPLACEMENT WEAR PARTS FOR

AGRICOM ATOM CABE CUB CADET EXMARK FERRIS GRASS HOPPER HUSQVARNA JARRETT KUBOTA McCLEOD MF M.E.A.A.T NOBILI PERUGINI SALIBA SEPPI SNAPPER VICTA WESTERN FEWING AGRIFARM BEREND'S CELLI DAKEN FALC FORD N HOLLAND GREAT DANE HUSTLER JOHN DEERE LOXTON MALETTI MOTT ORMARV RANSOME SAMMUT SHIBAURU TORO VIKING AGRIMASTER BERTI CHRIS GROW DEUTSCHER FERABOLI GESSNER HONDA ISEKI KANGA McCULLOCH MASSEY MTD PAGE ROVER SCAG SICMA TRI-MAX WALKER ALAMO BOMFORD COX DIXON FERRI GIANNI FERRARI HOWARD JACOBSEN KRONE McCONNEL MASCHIO MURRAY PEGORARO RYAN SCHMIDT SITREX VAN VUUREN WARATAH

BORON STEEL GREAT SERVICE QUALITY ALWAYS HUGE STOCKS RAPID DISPATCH

Only Boron steel gives you blades this tough and hard. Experienced staff who are helpfull and knowledgable. ASP only supply quality products that you can trust. Parts in stock for all major grass care applications. All orders leave same day of order on stocked items.

PH 07 3881 3464

FX 07 3881 3474

EMAIL: [email protected] WEB: www.asproducts.com.au Alloy & Stainless Products Pty Ltd Unit 2, 111 Southpine Rd Brendale, Q. 4500

ABN 91 088 139 520

Information

PARTSCATAUGO6

48 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

84794


You might also be interested in

BETA
PARTSCATAUGO6
Layout 1
PAGES 3-9.qxp
ROTARY MOWER PARTS - ROTARY CUTTER PARTS - FINISH MOWER PARTS
P2004 Shortlines Part 1.qxd