Read concrete.pdf text version

kk

Concrete

70

C011, C036, C051, C060, C066

C013, C038, C053, C068, C082

C014, C039, C054, C063, C083

C015, C040, C055, C064, C070, C084

C089-04, C089-10, C089-19, C087-01

C087, C087-01, C088, C088-01

Compression testing machines, 4 columns standard and high stability frame

4 columns types, standard kN 1200 C011 C012 C013 C014 C015 C016 1500 C036 C037 C038 C039 C040 C041 2000 C051 C052 C053 C054 C055 C056 3000 C066 C067 C068 C069 C070 C071 3000 C080 C081 C082 C083 C084 C085 5000

Manual operated, 1 manometer Manual operated, 2 manometers Motorized, 1 manometer Motorized, 2 manometers Motorized, Cybertronic unit C109 Motorized, Servotronic unit C104 4 columns, high stability frame Motorized, 1 manometer Motorized, 2 manometers Motorized, Cybertronic unit C109 Motorized, Servotronic unit C104

C086 C086-01 C086-02 C086-03

C089 C089-01 C089-02 C089-04

C089-06 C089-07 C089-08 C089-10

C089-15 C089-16 C089-17/C087 C088 C089-19/C087-1 C088-01

Concrete

Compression testing machines

Three basic types are available: Machines with four columns prestressed frame, standards UNI 6686,1,2 -ASTM C39 -BS 1610 NF P18-411 Machines with four columns high stability and stiffness frame, standards EN 12390 -BS 1881 -DIN 51220 Machines with en bloc frame 2000 kN, standards ASTM C39, NF P18-411, DIN 51220 - BS 160, UNI 6686

71

General description Load frame

The load frame is extremely strong and oversized to grant high rigidity and stability. The upper head holds the precision lapped ball-seating and the compression platen. They are surface hardened HRC 60 and ground. Design emphasis has been placed on simplicity both of construction and operation so that our machines are rugged, easy to use and maintain and designed for heavy continue use. They are available in 1200 kN, 1500 kN, 2000 kN, 3000 kN, 5000 kN capacity, both hand-operated and motorized, at one or two gauges with electronic digital display measuring system and with automatic servo-controlled console with microprocessor. The different versions give the possibility to test cubes, cylinders, blocks. All the machines can be equipped with safety guards.

Hydraulic system

Piston has large diameter, this allows the hydraulic circuit to work at low pressure with longer life of working components and higher precision in the results. Piston is ground and lapped and a packing high quality set of three elements is utilized. Motorized models have a dial device to visualize, pre-select and control the flow allowing an uniform load rate as requested by standards. A fast approach ram action device is foreseen to avoid dead times during stroke of the ram. The manual pump has two stages for fast approach ram action and automatic change for test pressure. Power pump is multipiston, assuring continuity of delivery. A movement indicator visualizes instant by instant the piston's excursion during the compression test. A hopper is foreseen avoiding the powder of the broken specimen to enter into the cylinder of the press damaging the packing set.

Load measuring systems

Gauge The gauges are Bourdon tube type with max. load pointer, zero adjustment and mirror face to avoid parallax errors. Low pressure gauge is fully protected from overload by a pressure control device.

Digital display units

CYBERTRONIC digital computerized multi-channel display unit C109 For acquisition, visualization, processing and saving of the test dates. Permanent fil up to 450 complete sets. Big graphic display , measuring range kN, Kg, lb, t, Mpa, N/mm2, selectable language, RS232 for PC connection, automatic linearity guided algorithm with high precision, class 0.5. Integrated printer available. SERVOTRNIC Servo-controlled control unit C104 for automatic tests throughout all phases: data acquisition, display, processing, pace rate adjustment and software for print out of results and certificate. Including motor, hydraulic unit.

C109

Calibration and precision

All the compression machines are calibrated with high accuracy electronic instruments and they are guaranteed in grade "A" (max. error less than ±1%). A calibration certificate is supplied along with the machine. C104

kk

Compression testing machines with digital display unit

Load frame The load frame is extremely strong and oversized to grant high rigidity and stability. The upper head holds the precision lapped ball-seating and the compression platen. They are surface hardened HRC 60 and ground. Design emphasis has been placed on simplicity both of construction and operation so that our machines are rugged, easy to use and maintain and designed for heavy continue use. Hydraulic system Piston has large diameter, this allows the hydraulic circuit to work at low pressure with longer life of working components and higher precision in the results. Piston is ground and lapped and a packing high quality set of three elements is utilized. Motorized models have a dial device to visualize, pre-select and control the flow allowing a uniform load rate as requested by standards. A fast approach ram action device is foreseen to avoid dead times during stroke of the ram. A movement indicator visualizes instant by instant the piston's excursion during the compression test. Load measuring systems C109 CYBERTRONIC digital computerized display unit For acquisition, visualization, processing and saving of the test dates. Permanent file up to 450 complete sets. Big graphic display , measuring range kN, Kg, lb, t, Mpa, N/mm2, selectable language, RS232 for PC connection, automatic linearity guided algorithm with high precision, class 0.5. Integrated printer available. C104 SERVOTRONIC Servo-controlled display unit for automatic tests throughout all phases: data acquisition, display, processing, pace rate adjustment and software for print out of results and certificate. Including motor, hydraulic unit. Software UTM2 for Cybertronic unit C109 for managing and remote control of press from PC C109-10 Software, licence for compression tests C109-11 Software, licence for flexion tests C109-12 Software, licence for tensile splitting tests C123 Software Servonet for Servotronic display unit, licence for compression and flexion C125 Software for secant compression elastic modulus on conrete ISO 6784, DIN 1048 C127 Graphic printer on thermo paper on board

Compression testing machine with Cybertronic display unit C109

Compression testing machine with Servotronic display unit C109 Four columns frame, standard, kN 1200 Motorized, Cybertronic C099 C015 Motorized, Servotronic C104 C016 Four columns frame, superior Motorized, Cybertronic C099 Motorized, Servotronic C104 1500 C040 C041 2000 C055 C056 C089-02 089-04 3000 C070 C071 C089-08 C089-10 3000 C084 C085 5000 C086-02 C086-03

C089-17/C087 C088 C089-19 C087-01 C088-01

Concrete

Digital display units for compression testing machines

C109

72

C109 Cybertronic digital computerised three-channel unit for acquisition, visualisation, processing and saving of the tests datas. Big permanent file for up to 450 complete test sets, graphic display of 240x128p pixels with high resolution, test software for current standards, selectable measuring range kN, Kg, lb, t, Mpa, N/mm2, psi, lb/in2, kg/cm2, pace rate display in M'a/s, psi/s, kN/s, kg/cm2/s, kg/cm2/s, lb/s, kg/s, t/s. RS232 port for PC/printer connection, selectable languages, simplified functions for calibration by PC keyboard, automatic linearity guided algorithm with very high precision, class 0.5 staring from 10% of the maximum value. C127 On board graphic printer for thermo papier C104 Servotronic servo-controlled unit For managing and remote control of the test from PC. Provides fully automatic tests throughout all phases : data acquisition, display, processing, pace rate adjustment and software for the print out of results and certificates. Rapid approaching, touching on and breaking of the specimen under direct pump control, tare, checking of pace rate by device that can be pid programmed on the step actuator, continous load display, breaking load detection, elaboration of specific resistance value, graphic elaboration directly on the display. The Servotronic comprises motor, hydraulic unit, multi-channel computerised digital device C109. Software for Cybertronic unit C109-10 Software for the managing and remote control from a PC including license for compression test. C109-11 Software for the managing and remote control from a PC including license for flexure test C109-12 Software for the managing and remote control from a PC including license for tensile splitting test. C123 Software for SERVTRONIC unit for the managing and remote control. For compression and flexure tests on concrete and mortar. C127 Graphic printer on board for thermo paper C128 Table printer, size A4 H009-01 PC , 17" display, including installation of software

C104

Concrete

73

Main Features of the UTM 2 1. Automatic identification of the appliance connected. 2. Setting of the sequence of operations concerning the test to be made, settable by the operator and realisation of a personalised testing profile. 3. Memorisation of the test in the database with the possibility to process it again. 4. By means of a PC connected by a serial port RS232 to the appliance foreseen (see list of application machines and fields) it allows interacting, test processing, graph and test report constructing and many other possibilities of remote control of the machine. 5. It allows visualising the instant loads, the instant deformations, the load/deformation/stroke graph, the remote control of the main functions of the machine. It can visualise the eventual alarms and/or errors, calculate and save all the parameters of the test made with the possibility to process again. It can manage the test files. 6. By means of an easy menu (Windows) the user can create or personalise test profiles following his own needs: he can set the dates of the test, the analogical measuring channels features and the setting of a test cycle personalising the speed charts. 7. The test dates can be commented by means of test titles to be reported on the certificate or on the graph desired. 8. The user can select the calculation algorithms and, using them, the software will process all the results required by the Standards 9. The colours and the graph scales of the activated windows can be freely selected by the user. 10. The test certificate can be personalised with the foll o w i n g 11. Possibility to have a remote control of the machine calibration.

vari a b l e s : na m e of the co m p a n y , kin d of test, dat e, kin d of gra p h an d nu m b e r of pa g e s .

Concrete

74

C090-03 C090-01

C091-02+C109

C093-02+C104

Flexural testing machines

Three basic design are available C090 Series to perform flexural tests on concrete beam specimens having max. dimensions of 150x150x750 mm conforming to the specifications EN 12390/5 -UNI 6133 -ASTM C78,C293, AASHTO T97 -BS 1881:118 -UNI 6133 -UNE 83305 NF P18-407. C091 Series with open sided frame to perform flexural tests on concrete beam specimens having max. dimensions of 200x200x800 mm and to perform tests on: flat blocks (max. width 500 mm) conforming to the BS 6073/1, flagstones and kerbs conforming to the BS 7263, kerbs conforming to the NF P98-302. Any type of beam having max. size 550xh250 mm (lower roller max. length 1325 mm) C093 Series to perform flexural tests on concrete beam specimens having max. dimensions 200x200x800 mm and to perform tests on any kind of other product with max. dimensions 550xh550 mm (adjustable distance between lower rollers up to max. 1325 mm). All series are proposed in the models hand operated, motor operated, Digitronic, Cybertronic and Servotronic digital display unit . It is also possible, by using suitable accessories, to perform the following tests: -Compression test on portions of 40x40x160 mm mortar prisms broken in flexure conforming to EN 196, DIN 1164 (compression devices mod. E170, E170-01). -Compression tests on 50 mm mortar cubes conforming to ASTM C109 (Compression device mod. E171) -Compression tests on 70 mm mortar cubes conforming to BS 4550 (Compression device mod. E171-01) -Splitting tensile test on cylindrical specimens Ø100,150,160 mm conforming to EN 12390/6 -NF P18-408 -BS 1881:117, ASTM C496 -UNI 6135 (Device mod. C100) -Splitting tensile test on concrete cubes and concrete block pavers conforming to EN 12390/6,1338 (Device mod.C103)

Concrete

75

Universal groups For compression test on concrete specimens, blocks, flexural test on concrete beams, compression tests on mortar specimens, slitting cylinder tests. The composition of the universal group are formed by: C092 Flexural frame 150 kN capacity With dial gauge (see mod.C090-01 for technical specifications), fitted with a three-way hydraulic valve, used in connection with an existing compression testing machine (see mod.C013-C089-16) dial gauge reading, motorized. With pipes, connectors and accessories. C092-01 Flexural frame 150 kN capacity Same as C092 but with pressure transducer and electronic digital display unit with microprocessor (see mod.C090-02 and C099), fitted with a three-way hydraulic valve, used in conjunction with an existing electronic digital display compression machine (see mod.C015-C089-17). C092-02 Flexural frame 150 kN capacity Same as C092-01 but with automatic servo-controlled console and microprocessor (see mod.C090-03 and C098), used in conjunction with an existing automatic servo-controlled compression machine (see mod. C016C089-19). Compression frames on concrete specimens and blocks The composition of this group is obtained by: C092-05 Compression frame on mortar specimens 250 kN or 500 kN capacity with pressure transducer (see mod. E159 and C099) fitted with a 3-way hydraulic valve used in conjunction with an electronic digital display concrete compression machine (see mod.C015-C089-17), with pipes and connectors.

C055 C092-01

C053

C092

C092-07 Compression frame on mortar specimens Same as C092-05 but used in conjunction with an automatic servocontrolled concrete compression machine (see C016-C089-19). These groups offer the advantage to carry out compression tests on concrete cube, cylinder and block specimens and compression tests on mortar specimens. An hydraulic 3-way valve activates alternatively the concrete compression frame or the mortar compression frame by utilizing only one hydraulic pumping unit. The group is combined according to the specific requirements (technical and economic) of the customer by choosing the concrete compression frame among the different available models (mod. C015-C089-19) with max. capacity of 1200 kN to 5000 kN. In addition to the proposed groups, it is possible to compose many other alternative testing groups with digital display measuring system (mod.C099) or with automatic servo-controlled "Servo-unit " system (mod.C098).

C092-02+C104+C092-02

Our technical department is at your disposal to solve any specific demand.

Concrete

C100 C101 C102

76

C 100 Splitting tensile test device for cylindrical specimens 150x300 mm, 160x320 mm, 6x12". Standards ASTM C496 -NF P18-408 -EN 12390/6 UNI 6135 -BS 1881:117. To perform the test, these devices have to be used with a concrete compression machine having of a low capacity measuring range. C101 Splitting tensile test device Same as mod.C100 but to perform tests on cylindrical specimens 100x200 mm, 110x220 mm, (4x8"), weight 15 kg. C101-01 Splitting tensile test device For cylindrical specimens from 100x200 mm (4x8") to 160x320 mm (6x12"). The base is equipped with flat springs centering and keeping in position the specimen. Two columns with adjustable height sustain the upper plate by two springs. This item is an alternative solution to mod. C100 and C101. Weight 26 kg. C102 Splitting tensile test device To perform tests on cylindrical specimens 40x80 mm, 1 kg. C103 Splitting tensile test device Standards EN 12390/6, 1338 To perform tests on concrete cube specimens 100 and 150 mm and on concrete block pavers. Weight 26 kg. C100-01 Packing strips, hard board made, dimensions 4x10x350 mm to be used for splitting tensile tests with mod. C100,C101, C101-01. Pack of 100. C106 Flexural device For two point and center point tests on concrete beams 100x100x400 (500) and 150x150x600 (750) mm with two lower rollers, one of them articulated and two upper rollers for third point tests. It is possible to place in the center only one upper roller for center point tests. C107 Autocentering device For cubes 100 and 150 mm side to be used with compression machine having platen 216 mm (1500 and 2000 kN). Compressometer, static modulus of elasticity Standards ASTM C469 - UNI 6556 To determine the strain and deformation characteristics of concrete specimens. It comprises two steel rings for clamping to the specimen, two gauge length bars, dial gauge division 0.001 mm and sphericallyseated lever unit. C130 Compressometer for cylinders 150x300, 160x 320 mm and 6x12 ". Dial reading 0.001 mm. C131 Compressometer for cylinders 100x200, 110x220 mm and 4x8 ". Dial reading 0.001 mm. C132 Compressometer for cubes 150x150 mm side., dial reading 0.001 mm.

C132

C101-01

C103

C106

C107

C130

Concrete

C140-07 C138

77

The load cells are suitable for the calibration of compression testing machines. They consist of a high quality steel block, named sensitive element, where some strains have been fitted. The whole is housed in a sheathing. While the load is applied, strains are transmitted to an amplifier (mod. C139), which gives a load digital reading. With calibration certificate. C140-02Electronic universal tester for load cells C138 This unit for professional uses, is proposed as an alternative to mod. C139, and is recommended to Metrologic Laboratories, SIT centers etc. It has to be used with the "High performance strain load cells" mod. C142 to C142-07. The input section is realized with a chain of an analogue circuit, a frequency generator to supply the electric load cells an AID converter with resolution ±200'000, divisions. With serial output RS 232C and 24 columns printer output, 220/240 V, 50/60 Hz, dimensions 125x210x204 mm, 3 kg. C138-01 Software "Matcal" For data acquisition and processing of calibration values with certificate printing. With CD ROM C154-01Positioning device for footmeter test C155 Digital measuring tester with microprocessor This unit reads simultaneously the four values supplied by the electric strain load cell. The values are memorized, automatically elaborated, visualized and printed (by optional printer). in carrying case, 220/240 V, 50 Hz, dimensions 450x350x160 mm, weight 8 kg.

C154-01

C140

C138-01

C142-06

C155

C154-01 Standard load cells C140 ­ C140-09 kN Steel cylinder with four balanced strain gauge bridges and a fifth strain gauge for load measurement calibration test. Complete with connectors, cables, calibration certificate. Models Capacity Dimensions kN x height mm C140 25 82x59 C140-01 50 82x59 C140-02 75 82x59 C140-03 100 82x59 C140-04 300 135x200 C140-05 600 135x200 C140-06 1000 135x200 C140-07 2000 135x200 C140-08 3000 135x200 C140-09 5000 180x200

High performance load cells C142 ­ C142-07 Standards EN 10002/3 class I - ASTM E74, class A Technical specifications: full scale nominal output 2 mV/V hysteresis (non linearity) ±0,1%, repeatability 0.03%, nominal voltage excitation DC 12, uncertainity 0.05%. Models Capacity Dimensions kN x height mm C142 30 100x127 C142-01 100 105x164 C142-02 300 140x160 C142-03 600 140x170 C142-04 1000 150x180 C142-05 2000 135x200 C142-06 3000 135x200 C142-07 5000 158x258

Concrete

78

C160 Drum type mixer, 140 l capacity Suitable for field mixes of medium strength concrete. Drum volume 140 liters, yield 90 liters of concrete. 220/240 V, 50 Hz, 0.3 Hp, dimensions 720x1320x1280 mm, weight 84 kg. C161 Drum type mixer, 100 l capacity Same as model C160 but having drum volume 100 liters, yield 65 liters of concrete, weight 60 kg. C162 Pan type mixer, 56 liters capacity This multiflow mixer absorbs fewer air during mixing, requires shorter mixing time and grants a perfect homogenity in mixtures having a low water cement ratio. The pan is easily removable by means of a trolley (accessory).The blades are hardened against wear. Mixing pan Ø 640x330 mm high, 220/240 V, 50 Hz, 2 Hp, weight 250 kg. C 162-01 Trolley For fast and easy removal of the mixing pan of the multiflow mixer. C162-02 safety guards to 89/392/CEE directives.

C160

C162

C162-01

C166 Concrete mixers, pan type EN 12390-2 Used to prepare concrete specimens or mixtures, these pan type mixers ensure a uniform efficient fast mixture action. They are of easy and practical utilisation, suitable for laboratory and field purposes. The mixers are equipped with a manually controlled discharge opening situated on the bottom part of the pan, for direct unloading of the mixture into a suitable container. The mixing lades and paddle can be adjusted in height. They are manufactured of special quality hardened steel to resist wear. The pan and the mixing gears have big thickness ration, the gears are from hardened and rectified steel, the motor reducer is in oil-bath with gleason conical coupling. Controls through magneto-thermo switch and release automatic coil contained in IP67 box. C166-01 C166 Pan type mixer, mixing capacity 200 l Pan diameter 960 mm, pan volume 350 l, mixing capacity 200 l of concrete, power supply 400 V, 3 ph, 50 Hz, 7.5 Hp, dimensions 1400x100x1500 mm, weight 350 kg C166-01 Pan type mixer, mixing capacity 110 l Pan diameter 800 mm, pan volume 200 l, mixing capacity 110 l of concrete, power supply 400 V, 3 ph, 50 Hz, 4 Hp, dimensions 1200x100x1300 mm, weight 260 kg C166-02 Pan type mixer capacity 100 l Pan diameter 790 mm, pan volume 200 l, mixing capacity 100 l of concrete, with wheels and handling bar, power supply 400 V, 3 ph, 50 Hz, 4 Hp, dimensions 1200x100x1300 mm, weight 260 kg.

C166

C166-02

Concrete

C180

79

Slump cone test Standards EN 1235012 - BS 1881:102 - AASHTO T 119 ASTM C 143 - NF P 18-305, P 18-451 UNI 7163, 9418 - UNE 7103, 83313. For the determination of the consistency, the medium and high workability of fresh concrete. C180 Slump cone complete set including: C180-01 Slump cone only, stainless steel C180-02 Tamping rod, galvanized 16x600 mm C180-03 Cone funnel, galvanized C180-04 Base plate for C182 set V176-02 Steel rule 500 mm long V183 Aluminum scoop. Total weight 10 kg. C181 Slump cone only, galvanized steel V185-03 Scoop, stainless steel for sampling fresh concrete, dimensions 125x250 mm. Capacity 5 kg. C182 Slump cone set Including galvanized slump cone, base plate, tamping rod, aluminum scoop, steel rule 500 mm long. C183 Vebe's consistometer Standards EN 1235013 - BS 1881:104 - UNI 9419 The Vebe consistometer method is based on the same principle of the simple slump cone test method for the determination of the workability of concrete, but it has the advantage of a mechanized action. After removing the slump cone, the concrete undergoes a vibration to determine its slump. A spacer disk set in contact with the upper surface of the wet concrete gives the operator the opportunity to determine when the compaction is complete. 220/240 V, 50 Hz, 250 W, dimensions 26x38x70 cm. C185 Compacting factor apparatus BS 1881:103 BS 5075 To undertake a more precise and sensitive test procedure than the simple slump test. The apparatus consists of two conical hoppers mounted on a cylinder. Each hopper has a hinged flange with quick release mechanism and all is mounted on a rigid steel stand. With tamping rod Ø 16x600 mm long, dimensions 50x40xl5I cm, weight 55kg. C 186 Kelly ball apparatus, ASTM C360 Consisting of a hemispherically ended cylinder with guiding frame and a handle graduated in inch and mm, it is used to determine the workability of fresh concrete. The ball is lowered into the concrete and the penetration measured. Cadmium plated for rust protection, weight 15 kg. C187 K-slump tester, ASTM C 1362 To determine the degree of compaction and the workability of fresh concrete. Used for in-situ measurements or inside test moulds. Test result can be correlated against the slump values, weight 500 g. C188 Walz consistometer Standards EN 12350/4 - DIN 1048 - UNI 9420 To measure the consistency of fresh concrete. It consists of a metal box with handles 200x200 mm, height 400 mm, painted for rust protection, weight 6 kg.

C182

V185-03 C183

C186

C185

C187 C188

Concrete

80

C189

C190

C189 Concrete workability meter Standard NFP18-452 The concrete workability meter (also known as plastometer) is designed to test concrete for dynamic workability. It is suitable for field and laboratory tests to check: - concrete mix for consistency, especially water content - optimum proportioning of concrete constituents (sand, gravel, water, cement) - possible improvement when adding a plastifier - comparing two concrete types. The unit consists of a prismatic receiver divided into two unequal volumes by a removable partition and an electric vibrator. The fresh concrete is poured into the large volume space, the separating partition is removed and the vibrator starts automatically. The test consists in measuring the time required for the concrete to reach an uniform distribution in the receivers. 220/240 V, 50 Hz, 300 W, dimensions 820x420x410 mm, weight 80 kg. C190 Plasticity meter Used for quick and easy measurements of the plasticity of mixtures, especially concrete and so to detect rapidly any excess of water. The measuring system is related to the shear strength applied by a three blade head to the mixture under test. It is possible to measure the plasticity at several different points and directly in the mixture, with multiple checking. Obtained values can be easily compared with the values got by the Abrams slump cone test, dimensions 130x180 mm. C192 Flow table EN 12350/5 - BS 188 1: 105 - DIN 1048 - UNI 8020 The apparatus comprises a galvanized steel conical mould, 130/200xh200 mm, double wooden flow table with galvanized steel top plane, guide device, wooden tamper, used to determine the workability of concrete. The top table has a square surface of 700x700 mm, hinged on one side. C192-01 Conical mould Galvanized steel made, 130/200x200 mm height. C192-02 Wooden tamper

C192

C194

C213

C194 Concrete pocket penetrometer Standards UNI 7123 - ASTM C403 - AASHTOT 197 Used for the evaluation of the initial set of the concrete mortar. The penetration plunger has a tip area of 32 mm2. It is plunged into the mortar to a depth of 25.4 mm indicated on the plunger. The resistance expressed in Kpa and Lbf/sq. inch, is shown on the marked reading scale, dimensions 25x210 mm, weight 400 g. C213 Concrete penetrometer Standards ASTM C 403 - AASHTOT 197 - UNI 7123,7927 Used to determine the setting time of the mortar fraction in concrete mixes with slump greater than zero, by testing mortar sieved from mix. The apparatus consist of a spring penetrometer (capacity 100 Kgf, precision 1 Kgf) and six interchangeable stainless steel needle pointers of 16, 32, 65, 160, 32 and 650 mm2. A sliding ring indicates the reached load on the handle of the penetrometer, in case, dimensions 450x160x70 mm, weight 5 kg.

Concrete

C195

81

C195 Air entrainment meter 5 liters capacity Standards EN 1235017 - BS 1881:106 - UNI 6395 ASTM C231 - NF P 18-353 - UNE 7141 Made of cast aluminium alloy. It records directly the percentage of air enclosed in freshly mixed concrete by operating according to the air pressure principle. It is supplied with pressure gauge tamping rod and hand pump. Air content range 0-8 %, division 0.1%, dimensions Ø 250x700 mm, weight 13 kg. C195-01 Calibration cylinder To check and calibrate the air meter model C195. C195-02 Carrying case with handles for C195.

C195-01

C196

C 196 Air entrainment meter 8 liters capacity Standard DIN 1048 It consists of an aluminium vessel with bulk in hand operated pressure pump connected to the measuring gauge showing directly the air content in percentage. Air content range 0-10 % division 0.1% up to 8% and 0.5% over, dimensions Ø 250x450 mm, weight 12 kg. C197 Air entrainment meter 8 liters capacity Standard DIN 1048 Identical to mod. C196 but with built in automatic electric air compressor giving air pressure and keeping it constant all along the test, 220/240 V, 50 Hz, dimensions Ø 250x450 mm, weight 14 kg. C 197-01 Filling hopper for mod. C196 and C197

C200 ­ C205-01

C199 Unit weight measure, 10 liters capacity Standards EN 12350/6 BS 1881:107 - EN 109713 Used to determine the weight per cubic meter of freshly mixed and compacted concrete. Steel protected against corrosion, with inside radius between wall and base of 20 mm, with rim and base, height 320 mm, weight 9 kg. C200 - C205-01 Unit weight measures Standards ASTM C29, C 138 - AASHTOT 19 - UNI 6394 UNE 7286 - BS 812,1881 - EN 109713 Made of heavy steel sheet protected against corrosion, they are used to determine the weight per cubic meter of freshly mixed and compacted concrete. It is used also for the determination of loose bulk density and voids of aggregates.

C199

V084

Model C200 C201 C201-01 C201 C202-01 C203 C204 C204-01 C205 205-01

Capacity 1 2 3 5 7 10 14 15 28 30

Inside 108.3 108.3 160 187.7 187.7 265 265 265 345.6 345.6

Weight 2 kg 3 kg 3.5 kg 4 kg 5 kg 7 kg 9 kg 12 kg 14 kg 15 kg

V084 Specific gravity frame For density of hardened concrete.

Concrete

C208

82

Concrete flow tables AASHTOT 120 - ASTM C124 - UNI 8020/A - UNE 7102 Used to determine the flow of concrete. The apparatus consists of a flow table, stainless steel flow mould, tamping bar. C208 Manual flow table according to ASTM, AASHTO, UNE Operated by crack handle. Table Ø 762 mm, weight 100 kg. C209 Motorized flow table according to ASTM, AASHTO With automatic digital drop counter, table Ø 762 mm, 220/240 V, 50 Hz, 750 W, weight 115 kg. C210 Manual flow table according to UNI 8020 Operated by crack handle, table Ø 750 mm, weight 100 kg. C210-01 Motorized flow table according to UNI 8020 With automatic digital drop counter. Table Ø 750 mm. 220-240 V, 50 Hz, 750 W, 115 kg. C210-02 Flow mould, cast bronze made to UNI 8020. C211 Joisel apparatus French LCPC method. Ø 140x220 mm high. Used to separate the various elements of the fresh concrete such as cement, sand, aggregates. All made from stainless steel, weight 2 kg. C215 RAM - Rapid analysis machine Standard BS 1881:128 Used for the determination of cement content in fresh concrete, coarse and fine aggregate, fly ash and GGBF slag content can also be determined. Fully automatic procedure with quick and accurate test results (max. errors within 5 kg/m3). The complete test takes approx. 10 minutes. The connection to water net for approx. 80 liters each test is required. The weight of the test sample is 8 kg, supplied complete, 220/240 V, 50 Hz, dim. 780x660x 1500 mm, weight 150 kg. C220 Water test set for concrete mixing Standards DIN 4030 - EN 206, 1008 This kit, utilized to test the water mixing concrete, is composed of different dropping bottles, water-proof color scales, test strips. It is suitable, to carry out more than 50 analysis of e.g. total or momentaneous pH, magnesium, ammonium, chloride, odour, sulphate, lime dissolving CO2, carbonate hardness, total hardness etc, in case. Weight 2 kg.

C209

C211

C220 C215

Concrete

C230-01 C230-03 C228

83

C229

C234 C232 C230-04 C230-02

C231

Plastic cube and cylindrical moulds These one-piece moulds, made of hard plastic, strong, light, undeformable, resistant to vibration shocks and wear do not require mounting and dismounting operations, thus saving time and labour. The specimen is expelled from the mould by compressed air or water. They just require a simple clean and demould oiling before being ready for use again for many times. Nominal moulds dimensions meet to EN 12390/1 standard requirements. C228 C229 C232 C234 C230 C233 C230-01 C230-02 C230-03 C230-04 Cylinder mould Ø 150x300 mm, weight 2560 g. Cylinder mould Ø 160x320 mm, weight 2560 g. Cube mould 100 mm side, two gangs, weight 1040 g. Cube mould 150 mm side, standard model, 1300 g. Cube mould 150 mm side with reinforced corners, weight 1500 g. Cube mould 150 mm side, "high density" similar to mod. C230, but made of more dense and compact plastic material, and therefore more resistant to blows and to abrasion. Weight 2 kg. Funnel (filling hopper) for an easier filling of fresh concrete into mod. C230. Plastic cover for mod. C230, C233 cube mould, useful for transportation. Pack of 10 pieces. Grasping pliers for mod. C230, C233, C234 to get easier the carriage. Plastic stopper to plug the hole of the mould. Pack of 10 pieces.

Polystyrene cube moulds This cube mould, polystyrene made, is "one way" utilized, only for one single test since it must be broken when the specimen is demoulded. It offers different advantages: - it is provided with a top cover keeping inside heat and humidity constant and acting as a curing room - it protects the specimen as a packing during transport of the same - it is extremely light - any trouble concerning the cleaning demoulding and maintenance of the mould are eliminated. C231 Polystyrene cube mould, 150 mm side, one gang, pack of 40 pieces. C231-01 Polystyrene cube mould, 200 mm side, one gang, pack of 20 pieces. C231-02 Polystyrene cube mould, 100 mm side, four gang, pack of 52 pieces.

Concrete

84

C254-04

C248

C247-02

C258-04

C249-01 C258-01 C258

Steel cube, cylindrical and beam mould Standards EN - 1239011 - BS 1881:108,109, 110 - ASTM C 192, C31 - AASHTO T23 - NF P 8 - 400 - DIN 51229 - UNI 6130 - UNE 7240 These moulds are extremely sturdy and the inside surfaces are grounted and accurately machined. C247 Cube mould 100 mm side, one compartment, weight 6 kg C247-01 Cube mould 150 mm side, one compartment weight 13 kg C247-02 Cube mould 200 mm side, one compartment weight 25 kg C247-03 Cube mould 300 mm side, one compartment weight 90 kg C248 Cube mould 100 mm side, two compartment weight 11 kg C248-01 Cube mould 150 mm side, two compartment weight 30 kg C248-02 Cube mould 200 mm side, two compartment weight 53 kg C248-03 Cube mould 100 mm side, three compartment weight 17 kg C248-04 Cube mould 140 mm side, three compartment weight 30 kg C249 Cube mould 100 mm side, four compartment weight 20 kg C255 C249-01 Cube mould 150 mm side, four compartment weight 45 kg C254 Beam mould 100x100x400 mm, weight 20 kg C254.01 Beam mould 100x100x500 mm, weight 23 kg C254-02 Beam mould 150x150x600 mm, weight 44 kg C254-03 Beam mould 150x150x750 mm, weight 47 kg C254-04 Beam mould 200x200x800 mm, weight 86 kg C254-05 Beam mould 140x140x560 mm, weight 38 kg C255 Cast iron 150 mm side cube mould, one gang Standards EN 12390 -1 - BS 1881:108 - DIN 51229 - UNI 6127 Four part design plus base plate, weight 17 kg. C256 Cast iron 150 mm side cube mould, one gang, with certificate of conformity. Four part design plus base plate, this mould has been checked in shape, dimensions and tolerances with SIT (NAMAS or equivalent) certified measuring instruments. Each mould is numbered for identification, weight 17 kg. C230-01 Filling hopper for an easier filling of fresh concrete into the cube moulds. Steel cylinder moulds with base Models Dimensions Weight Øx height kg C258 100x200 mm 8 C258-01 112.8x220 mm 8 C258-02 150x300 mm 15 C258-03 6"x12" 15 C258-04 160x320 mm 17 C258-05 250x500 mm 80 C258-06 150x150 mm 10

C180-02 C261 C262 V178-01 C265

Tamping rod Ø 16x610 mm long Tamping bar 25 mm2 tamping area, 380 mm long Straight edge, 460 mm long. Wire brush used to clean moulds Demoulding oil, can of 30 kg

Concrete

C271 C273

85

Poker vibrators Suitable for the internal compaction of concrete specimens both in laboratory and in site. The Ø of the needle must not exceed 25% of the smallest dimension of the specimen. C271 Poker vibrator, portable, petrol operated 0.75 hp, tip Ø 25 x250 mm long, flexible shaft 2 m, frequency 12000 vibrations/ min, dimensions 30x30x40 cm, weight 9 kg. C273 Poker vibrator, portable, electric Tip Ø 25x250 mm, flexible shaft 2 m, frequency 12000 vibrations/min, 220/240 V, 50 Hz, 300 W, weight 7 kg. C274 Poker vibrator, portable, 12 V DC battery operated with connector for car lighter, tip Ø 25 mm x 250 mm , flexible shaft 2 m, frequency 12000 vibrations/min, weight 10 kg C275 Poker vibrator, portable, electric Tip directly connected to the motor shaft, tip Ø 25x250 mm long, frequency 18 000 vibrations/min, 220/240 V, 50 Hz, weight 4 kg. C276 Poker vibrator pneumatic, to be connected to an air compressor having minimum feeding of 25 liter air/min at 6 atm, tip Ø 25x250 mm, frequency 3000 vibrations/min. Vibrating tables Standards EN 12390/1 - BS 1881:108 - UNI 6127 For compaction of concrete specimens in laboratory they are manufactured from rugged steel sheet. With motor-vibrator having 3000 vibrations/min. It is possible to vary the vibration intensity by acting on the excentric masses. The height of the table is 410 mm, 220/240 V, 50 Hz. Models Table dimensions Weight kg C278 600x400 mm 60 C278-01 800x400 mm 85 C278-02 800x800 mm 115 C279 1100x550 mm 145 C279-02 Separate control panel C279-03 Clamping device to fix the moulds C280 Vibrating table for plastic moulds With On/Off switch, 220/240 V, 50 Hz, 300 W, dimensions 320x320x300 mm, weight 20 kg. Cylinder capping equipment, sulphur method The above mentioned specifications require that the two faces of the concrete core or cylinder specimen must be made perfectly flat and parallel, by using sulphur capping equipment. C290 Capping set for cylinders 15x30 cm 6x12" including: C290-01 Vertical cylinder capper for 15x30 cm C290-02 Cylinder carrier for 15x30 cm C290-05 Capping compound, pack of 25 kg. C290-03 Electric melting pot 3 liters, 1200 W. V186-01 Stainless steel ladle C291 Capping set for cylinders 16x32 cm All elements also available individually. C296 Steel capping plate 50x30x2 cm for concrete blocks

C280

C275

C279-02

C279-03

C278

C279

Concrete

86

Curing tank for concrete specimens EN 12390/2 - BS 188 1:111 - UNI 6129 - ASTM C3 1, C 192, C51 1 - AASHTO T23, NF P 18 - 404 - UNE 7240 C302 Curing tank, capacity 1000 l Made from heavy stable and robust polyethylene, base rack, cock for an easier water discharge. inside dimensions 104x104x60.5 cm, weight 60 kg. Without thermostat C304 Curing tank capacity 1000 l Made of zinc coated steel sheet to prevent it from corrosion., inside dimensions 150x75x75 cm. The tank can accommodate up to 64 cubes 150 mm side or up to 48 cubes 200 mm side, 220/240 V, 50/60 Hz, 2000 W, weight 120 kg. C304-01 C304-02 C305-01 C306-01 With analogical thermostat with heating system With digital thermostat with heating system Plastic cover for C302 Rack to form the upper shelf for 150 mm cubes, max. 8 racks per tank C306-02 Submersible pump for water circulation, 220-240 V C306-04 Steel cover, zinc coated C306-05 Analogical thermostat with heating element. It is used with thermostat in all tank types from 300 to 1000 liters capacity, 220 V, 50/60 Hz, 2000 W. C307 Accelerated concrete curing tank Standards ASTM C684 - BS 1881 This tank has been designed for accelerated concrete strength curing. It comprises a fully insulated double wall tank with cover, inside all of stainless steel, outside from steel painted sheet with an intermediate layer of insulating mineral wool. This tank can hold up to 16 cubes 150 mm side specimens or 16 cylindrical Ø 150 mm specimens or 8 cubes 200 mm side specimens. The test consists essentially in curing the concrete specimens with water heated by 3 electric elements of 1500 W each, temperature range from ambient to 100°C. The separate control panel is provided with a thermo-regulator timer, pilot lights, main switch. Inside dimensions 91x66x68 cm. Overall dimensions 97x72x90 cm, 220/240V, 50/60 Hz, 4500 W, weight 130 kg. C308 Accelerated concrete curing tank with automatic curing cycles The tank is identical to mod. C307, but equipped with digital control panel with microprocessor with following program: heating time, heating temperature, curing time, cooling time, cooling temperature by automatic calling of cold water, ideal for concrete precast industries, cement factories, research laboratories. C308-01 Strip printer To record the numeric values of time and temperature on paper with programmable printing time intervals.

C302+C304-01

C304+C304-02

C304-02

C306-02

C306-05

C307

Concrete

87

C311 Curing room vaporizer To humidify curing rooms for concrete and mortar specimen. With humidistat controller, range 30-100% max. room capacity 150 m3, 220 V, 50 Hz, dimensions 360x230 mm, weight 3.5 kg. C312 Curing room vaporizer Same to mod. C311, but for rooms up to 500 m3 C312-01 Level regulator It allows the direct connection to the water net, for a continuous use of the vaporizers C311 and C312.

C311 C313

C313 Curing room vaporizer For rooms over 500 m3, capacity 9 l/ h, air circulating capacity 800 m3/h, with humidistat controller, range 30100%. The unit is directly connected to the water net, 220 V, 50 Hz. C310 Recording thermometer at six channels To measure and record on graphics the temperature inside a concrete mass under relevant curing to know its reactions during the heat of hydration development. The thermometer is suitable to record simultaneously up to six readings in different points or masses, through relevant thermocouples range -10 to +110°C, with 50 meters of thermocouple cable, 4 rolls of graphic paper. C310-01 50 meters of thermocouple cable C310-02 Roll of graphic paper, pack of 10 pieces C310-03 Writing ink tape, pack of 6 pieces C314 Climatic chamber, capacity 520 l EN 196 - EN 1367/1 ASTIM C671 - BS 812:124 - CNR no 80 - UNI 8520 This thermostatic climatic chamber is designed for all the research and control laboratories where known cold and/or hot temperatures with controlled humidity values are required for any type for freeze/thaw tests, acce-lerated curing tests, hot and cold tests in general. Used also to check the behaviour of aggregates during freeze and thaw cycle tests. Temperature range -20°C +60°C accuracy ±0.5°C, humidity range 10-90%, dew point limits +2°C. Inside and outside frame totally in stainless steel. Digital display of actual and preset temperature, internal venti-lation, forced circulation, inside dimensions 62x63x139 cm, overall dimensions 73x86x209 cm, with 3 adjustable shelves, 220/240 V, 50 Hz, 1000 W, weight 150 kg. C315 Climatic chamber, capacity 1200 l Same as model C314 but having capacity 1200 1. Double entrance door, inside dimensions 124x73x139 cm, overall dimensions 1460 x 860 x 2090 mm, with 4 adjustable shelves, weight 230 kg. C315-01 Two curves graphic recorder C315-02 Microprocessor temperature programmer

C312

C310

C314 ­ C315

Concrete

88

C318-02 C318-01 C318

Core drilling machines "lightweight portable" These drilling machines are extremely practical, lightweight easy to use. The base is from aluminium alloy, the steel column can be angled, the motor support is fixed on rollers and ball bearings. The motor incorporates a water swivel to cool the diamond bit. The machine is supplied complete except diamond bit, expander coupling and spanner which have to be ordered separately.

C319

C318 Core drilling machine with electric motor With 3 speeds 670, 1140, 1580 rpm, with speed reducer, provided with friction device. The machine accepts bits 50 to 150 mm, 220/240 V, 50 Hz, 2200 W, dimensions 45x29x86 cm, weight 35 kg. C318-01 Core drilling machine, petrol driven Petrol engine power 2500 W, speed 390 to 920 rpm. The machine accepts bits 50 to 200 mm, dimensions 45x29x106 cm, weight 40 kg. C319 Core drilling machine, petrol driven Is used for pavement core sampling where it is C318-02 Core drilling machine, air driven not easy to get electrical power. Wit vertical Air motor with consumption of 50 liter/air, 3300 W, speeds 250- screw feed. Drilling excursion 640 mm. Petrol 390-580-830 rpm. The machine accepts bits 50 to 200 mm, engine 8.5 Hp power, 4-cycle Briggs & Stratton dimensions 52x33x135 cm, weight 68 kg. model, dimensions 85x58x123 cm, weight 135 kg.

Concrete

89

C321

Core drilling machines "High performance" These drilling machines are extremely robust, compact and reliable. The sliding group is rectified so as to assure a very soft and accurate drilling movement. The drilling excursion is 550 mm and the machine can drill cores up to 200 mm. The motor is advanced by a rack system with built in water swivel to cool the diamond bit. The robust steel base is equipped with wheels for easy site displacements with 4 leveling and stabilizing feet. All working and moving parts are cadmium plated for rust protection. Diamond bits, expander, coupling and spanner (see accessories) have to be ordered separately. C321 Universal core drilling machine, petrol driven Coring angle 0 to 360°, petrol engine, 6 Hp, two speeds 300 and 600 rpm with speed reducer, with friction device dimensions 75x44x30 cm, weight 90 kg. C322 Universal electric core drilling machine Coring angle 0 to 360°C, 3 speeds 670, 1140, 1580 rpm with speed reducer. The height of the vertical column is 100 cm and is pre-built for extension column connection. 220/240 V 50 Hz, 2200 W, dimensions 44x75x130 cm, weight 85 kg. C324 Electric core drilling machine, with vacuum facility Same as C322 but with vacuum attachment suitable under the condition that the surface is sufficiently flat.

C322

C332 Portable electric generator, 4000 W C322-01 Extension column, 1000 mm Diamond bits and accessories Diamond core drill bits are designed for making holes and to get cores from hard materials like concrete, reinforced concrete, rock, stones, bituminous. The diamond utilized for these bits is quality impregnated sinterized type. All bits are 500 mm long. The coupling between the bit and the drilling machine requires a suitable expander coupling. Two basic models are available: - to core concrete, rock, stones, hard materials - to core bituminous materials. Bits to core C340-06 C340-07 C340-08 C340-09 Expander coupling C343 C343-01 C343-02 C343-03 C343-04 Bits to core Concrete C341-05 C341-06 C341-07 C341-08 C341-09 Core extractor C346 C346-01 C346-02 C346-03 C346-04 Outside mm 57 83 108 160 210 Inside mm 50 75 100 152 200 Inside Bitumen mm C340-05 50 75 100 150 200

C340-05 ­ C341-09

C343 ­ C343-04 C346 ­ C346-04

C345

C344 Strap wrench useful for unblocking the bits C345 Extension rod 300 mm for deep holes

C344

Concrete

C348

90

C348 Specimen cutting machine With sliding support. The machine accepts blades up to 350 mm, useful cutting height 110 mm. The blade can be oriented for cuts at 45º, dimensions of the sliding table 500x450 m, blade rotation speed 2800 rpm, power supply 220/240 V, 50 Hz, 3 Hp, dimensions 700x1100x680 mm, weight 80 kg. C350 Specimen cutting machine Used to cut concrete specimens and any type of construction material like blocks, tiles, pipes, rock cores etc. The machine is equipped with an electro-pump for water cooling pedal guide for vertical cutting safety device against breakage of blade. The machine accept blades up to Ø 450 mm, 400 V 3 phase, 50 Hz,3 Hp, dimensions 1220xx136 mm, weight 125 kg. C349 Specimen cutting machine Basically same as mod. C350, but it can accept blade having max. 500 mm, 400 V 3 ph, 50 Hz, 4 Hp. C350-01 Specimen cutting machine Identical to mod. C350, but with 220 V, 50 Hz, 3 Hp.

C350

C352

C351 Specimen cutting machine, bench type The machine accepts blades up to Ø 355 mm. Shear capacity 120 mm blade rotation speed 3900 rpm, 220 V, 50 Hz 2000 W, dimensions 56x46x39 cm, weight 20 kg. C350-11 C350-12 C350-13 C350-15 Abrasive blade Ø 400mm Diamond blade Ø 450 mm Diamond blade Ø 350 mm Diamond blade Ø 500 mm

C352 Device for cylinders and cores To clamp and cut cylinders and cores. The device is fixed to the table of the cutting machines mod. C348, C350, C35001, C349, weight 10 kg. C353 Device for irregular shapes To clamp and to cut irregular shaped specimens, like rocks, stones etc. The device is fixed to the table of the cutting machine model C348, C350, C350-01, C349. weight 5 kg.

C351

C353

Concrete

C361 C362-01 C360 C363

91

Mechanical strain gauges, ASTM C426 - BS 1881:206 Used to determine the strain in concrete specimens and structures, rock strata etc. in remote areas and under adverse conditions using a single instrument. It consists of an extensometer with dial analogical gauge, precision 0.001 mm, calibration bar, 50 datum disks, special adhesive, in case. C360 Strain gauge, 100 mm measuring length C360-01 Strain gauge, 200 mm measuring length C361 Strain gauge, 300 mm measuring length Digital strain gauges Identical to above but with a digital gauge, battery operated, with reading values 0.001 mm/ 0.0001", battery and RS 232. C363 Strain gauge 300 mm measuring length C363-01 Strain gauge 100 mm measuring length C363-02 Strain gauge 200 mm measuring length C362-01 Datum disc, pack of 50 pieces C362-02 Special adhesive tube Hydraulic shrinkage determination Standards UNI 6555 - ASTM C426 This test covers the determination of the hydraulic axial shrinkage of concrete specimens having l00x100x500 mm (or l00x100x400) mm, with aggregates up to 30 mm. The specimen is prepared with a special mould and after housed in the measuring apparatus that determines the axial shrinkage. The equipment consists of: C365 Shrinkage mould 100x100x500 mm C365-01 Shrinkage mould l00x100x400 mm C366 Measuring apparatus for specimens 100x100x500 mm, with reference bar and dial gauge, reading 0.01 mm. C366-01 Measuring apparatus for specimens 100x100x400 mm with reference bar and dial gauge 0.01 mm C366-11 Steel inserts, pack of 10 pieces C367 Hydraulic shrinkage measuring apparatus For concrete made over 30 mm size aggregates. The specimen sized 200x200x800 mm is prepared with a standard mould(see C254-04) and measured by the apparatus on six points. With 6 dial gauges, reading 0.01 m and reference bar, weight 35 kg. C374 Moisture meter "Surveymaster" For measurements in concrete and other materials, both on surface and at depth. Measurement range 0-100 % ±0.1 1%, digital reading, audible alarm, with 2x1.5 V batteries, weight 200 g. C375 Hygrometer for moisture tests The hammer electrode is inserted into the material to be tested. With hammer probe, cable, casing and a numerical scale for comparative tests, dimensions 200x200x100 mm, weight 2 kg.

C365

C366

C367

C374

C375

C376

C376 Pull-out test apparatus ASTM C900 - BS 1881 part 207 - Uni 9535 Used to evaluate the concrete resistance as per the strength applied to extract an insert embedded in concrete. Standard equipment comprises hydraulic extraction unit 50 kN with pump, manometer, bearing ring, 10 steel inserts Ø 30 mm, carrying case, weight 18 kg. C376-01 Pull-out inserts Ø 30 mm, pack of 25 pieces.

Concrete

92

C372

C373 Ultrasonic pulse velocity tester type Palmer Graphic display, measuring range 0-1999.9 s, amplitude 800 peak volt, extractable memory SDcard, RS232, RS485, 2 probes 55 kHz, 2 cables, 2 outlets for oscilloscope, low battery alarm, ON/OFF switch, calibrating cylinder, grease, with batteries, in carrying case.

C372-01 Ultrasonic pulse velocity instrument TICO Display unit with nonvolatile memory for up to 250 measured objects, 2 transducers 54 kHz, 2 cables 1.5 m, calibration rod, coupling paste 150 ml, integrated software for transmission to PC, measuring range 15-6553.5 µs, resolution 0.1 µs, voltage 600 V, pulse rate 3/s, battery operated. In carrying case. Weight 3 kg.

C372-01

C371 Oscilloscope It visualizes the pulses when passing the material under test offering the advantage to verify on a monitor the correctness of the value in microseconds read on the digital display of the ultrasonic tester, i.e. that no disturbed pulse transmission like reflexion, deviation etc. has altered it, with connections and accessories, dimensions 350x170x420 mm, weight 12 kg.

C371

Ø

C380

Concrete

93

Rebound concrete test hammers Standards EN 12504/2 - ASTM C805 - UNI 9189 - DIN 1048 BS 1881: 202 - NF P 18-417 - UNE 83 307 ISO - DIN 8045. Designed for non-destructive tests on concrete structures. It gives an immediate indication of the compressive strength of the concrete using the calibration curve supplied with. C380 Concrete test hammer Classic model, spring impact energy 0.225 mkg (2.207 joule) suitable for finished concrete structures and buildings having strength resistance from 10 to 70 N/mm2. The hammer has aluminum frame and a very accurate manufacture processing and selected components which ensure high precision test results. Dimensions 8x34 cm, weight 3 kg. C381 Concrete test hammer Similar to C380 but with impact energy of 0.735 joule. Ideal to test small sized, sensitive and thin walled materials, also suitable for rock core samples. Original "Schmidt" test hammers The top quality test hammers available on the market with calibration curve chart, abrasive stone, carrying case. C382 Standard model "N" for normal concrete. Impact energy 2.207 joule/0.225 mkg C383 "NR" model, same as C382 model, but having an automatic incorporated device for recording the impact values on diagram C383-01 Spare roll recording paper for C383 ( pack of 5 ) C384 "L" model similar in shape to the "N" model, but having an impact energy of 0,735 joule and ideal for testing small and impact-sensitive materials. and rock samples. Compressive strength 10-70 N/mm2 C384-01Pendulum hammer P For compressive strength of 5-25 N/mm2, impact energy 0.883 Nm, readings of measured values on a scale. C385 Digital concrete test hammer DIGI-SCHMIDT 2000 Impact energy 2.2 Nm, compressive strength 10-70 N/mm2, accuracy ± 0.2R, display unit with non-volatile memory for max. 500o measurement values, display on 128x128 graphic LCD. RS 232 C interface, battery operated, in carrying case weight 3 kg. C390 Anvil for verification of calibration of concrete test hammers, dimensions 150x230 mm, weight 16 kg. All other models of original Schmidt test hammers (LP, LB, PT, M etc.) are available on request.

C382

C383

C385

C384-01

C390

Concrete

94

Rebar locators For locating rebars, measuring concrete cover, storing of single cover values and statistical evaluation, determination of rebar diameters. Standards BS 1881: 204 - DIN 1045. Rebar locator, Profometer 5 The lightest instrument in its class. Displays reinforcing bars and concrete covers on a LCD monitor with an X/Y meter scale, even with close rebar interspacing. An user-guiding menu technique and just 9 keys for all function ensure the simplest possible operation. The easily readable display shows up to 240 concrete covers in grey shades. Measures bar Ø to an accuracy of ±1 mm. C396 Rebar locator Profometer 5S Display unit with non-volatile memory for 100'000 measured values that can be spread over 63 objects. Display on 128x128 graphic LCD, interface RS 232. Software for printing statistical values and downloading to PC, battery operated. With universal probe for locating rebars, measuring concrete cover and determining rebar diameters, probe cable 1.5 m, transfer cable 1.5 m. In carrying case. Weight 2 kg.

C399

C396

C397 Rebar locator Profometer 5 Scanlog Same features as model S plus: "CyberScan" function for displaying the reinforcement "Measurement with grid" function for grey-scale display of concrete cover. Probe carriage ScanCar with path measuring device and transfer cable. In carrying case. Weight 2.9 kg. C400-01 Diameter probe with integrated electronics C400-02 Dept probe for concrete covers up to 240 mm C399 Crack detection microscope To measure crack width in concrete structures, by operating via an adjustable light source, high definition unit provided by power batteries, carrying case, measuring range 4 mm, division 0.02 mm, magnification 35x, weight 600 g. C404 Rebar locator Covermeter Standards BS 1881: 2G4 - DIN 1045 On-screen menu driven operation, pulse induction technique for stability and performance, automatic zeroing, embedded instrumentation computer, automatic sizing of single bars, steeable low cover audible alarm to enable rapid scanning, large graphic LCD display, measuring range 5 ­ 150 mm depending on bar size. With batteries, size 220x110x175 mm, 2 kg.

C404

Concrete

C406

95

Deflectometers Used to determine the deflection on bridges, ceilings or any suspended structure, possibility to use the deflecto-meter with pressure or with traction. Reading is direct with a precision of 0.01 mm. One set is composed of articulated support dial gauge reading 0.01 mm with arm, 20 m invar coil, lead, carrying case. C405 One set dial gauge stroke 10 mm C405-01 One set dial gauge stroke 25 mm C406 Three sets, dial gauges stroke 10 mm C407 Three sets 2 dial gauges stroke 10 mm, one stroke 25 mm C407-01 Three sets, dial gauges stroke 25 mm C407-02 Inextensible invar coil 20 m long Cracking width gauges For monitoring measuring and recording the crack width of a building structure, in vandal resistant polycarbonate, with crack record card each gauge to simplify monitoring, they are suitable for vertical and horizontal movement measurements. C408 Crack width gauge for walls To monitor vertical and horizontal movements, also simultaneous, on a plane surface, pack of 5 pieces. C408-01 Crack width gauge for corners To monitor comer cracks with two directional and simultaneous movements, pack of 5 pieces. C408-02 Crack width gauge for floors to monitor floor settlements to a wall, column etc., pack of 5 pieces. C408-03 Crack width gauge for difference in levels to monitor the loss of level of any cracked surface, pack of 5 pieces. C410 Windsor HP probe digital system Standards ASTM C803 - BS 1881: 207 - ACI 347 To evaluate the compressive strength of concrete in place with the penetration method. Non destructive test. It is fast, accurate and simple to perform. The five-minute test does not weaken the structure. Comparison between test results using this method and destructive tests shows a deviation normally situated within 3 % from each other. The method requires a pistol-like device which is loaded with a small explosive charge and metal probe. The charge is precisely measured to give a consistent firing force. By pulling the trigger, the probe is fired into the concrete. Standard equipment consist of driven unit, digital measuring unit with memory for data storage to PC unloading, in carrying case. Probes and power charges are not included and must be ordered separately, dimensions 500x400x200 mm, weight 16 kg. C410-01 Probe kit silver, colored for natural aggregates with probes and power loads. The kit lasts for 75 tests. C410-02 Probe kit gold colored for lightweight aggregates, with probes and power loads. The kit lasts for 75 tests.

C408 ­ C408-03

C408

C410

Concrete

C411

96

C411-01

C411-01

C411 Half-cell corrosion analyzing instrument CANIN Standards UNI 9535 - ASTM C876 - BS 1881: 201 For the non-destructive detection of corrosion in reinforce-ment bars of concrete building elements. Display unit with nonvolatile 1 M bit memory for 120'000 measurements, which can be divided into 72 objects. Impedance 10 M, measuring range ± 999 mV, resolution 1 mV, display on 128x128 graphic LCD. Measurement with up to 8 rod or 8 wheel electrodes. Equipped for path measuring, resolution 3 mm, interface RS 232, battery operated. With rod electrode, cable 1.5 m, transfer cable 1.5 m, cable coil 25 m, copper sulphate CuSO4, 250 g. In carrying case. Weight 3.7 kg Accessories C411-01 4 bar electrodes system with divisions of 150 mm, for bottom view and vertical operation, with accessories. C411-02 4 wheel electrodes system, for measurement on horizontal surfaces, with accessories. C412 Half cell digital corrosion meter Standards UNI 9535 - ASTM C876 - BS 1881: 201 The digital half-cell enables rapid location of corroding reinforcement without disrupting the concrete cover. The unit is a hand set with an integral (removable) Ag/AgCI/Sat KCI mapping electrode for maintenance free long term stability. The instrument automatically converts and displays the measurements as Cu/Cu S04 equivalent potentials. With battery and low battery indicator. The nylon carrying case contains a 10 m reference lead, sponge head, protective nylon cover and an extension kit with fold-up extension rod to enable remote surveying and fatigue, free testing of bridge, decks etc. Detachable silver/silver chloride mapping electrode. Range/resolution +1999 mV ±1 mV, dimensions 350x300x200 mm, weight 7 kg. C413 Digital resistivity 2-probe array meter For assessing the probable rate of corrosion in reinforcing bars with the electric resistivity measurement method. The test is simple to perform and requires only two 6.5 mm Ø holes drilled to a depth of 8 mm. Inject a small amount of conductive gel into each hole and insert the probes. The resistivity is immediately displayed. Low frequency alternating current technique used. 3 digit LCD display. With battery, dimensions 41x 26x14 cm, weight 3 kg. C413-01 Digital resistivity 4-probe Wenner meter Similar to model C413 except for probe used by surface contact. No hole is required. C415 Scribe multi role data-logger A unique multipurpose surveying system for measurements of reinforced concrete structures: half cell potential, concrete resistivity, cover and estimated size of reinforcement, electrical continuity of reinforcement. The multi role data-logger is at the heart of the system for which a number of add-on "heads" have been developed which convert it to an instrument for the measurement and assessment of related characteristics. Select the role required on the data-logger, connect interface and appropriate "head" and start survey. Please ask for detailed leaflet.

C412

C413-01

C413

C415

Concrete

97

C414

C414 Resistivity meter RESI For measuring the electrical resistance of reinforced concrete components for assessing the risk of corrosion. Display unit with non-volatile memory for 7200 measured values, 128x128 graphic LCD, RS232 interface, battery operated. Resistance probe Wenner r with integrated electronics for resistivity measurement by four-point method, rated current 180µA, frequency 72 Hz, impedance 10M, measuring range 0-99 kcm, accuracy ± 1 kcm. With cable, control plate for resistance probe, in carrying case. Weight 2.5 kg Pull-off tester Light and precise portable instrument for determining the adhesive force and the tensile strength of concrete, mortar, coatings, paints and lacquers. C416-01 Pull-of tester DYNA Z16 with pressure gauge tensile force 16 kN, accuracy better than <± 2%, digital display in N/mm2, test disc Ø 50 mm, battery operated, in carrying case. Weight 6 kg Same model but with 6, 25, 50 or 100 kN available. C417-01 Pull-of tester DYNA Z16E, electronic type Same as C416-01 but with pressure sensor, accuracy better than <± 0.5%.tensile force 16 kN. With Dynameter display unit. Same model but with 6, 25, 50 or 100 kN available. Extraction test DYNA For measuring the extraction force on anchored bolts and dowels. C418-01 Extraction tester DYNA 16S with pressure gaugeTensile force 16 kN, accuracy better than <± 2%, digital, tensile bolt, in carrying case. Weight 8 kg Same model but with 6, 25, 50 or 100 kN available. C419-01 Extraxtion tester DYNA 16FS Eelectronical type, with pressure sensor, accuracy than <± 0.5% on force 0.01 mm on displacement, tensile force 16 kN, indicating unit WIGAmeter for force/displacement, display on 128x128 graphic LCD, RS 232 interface, battery operated, in carrying case. Weight 16 kg C417-10 Printer DPU 201 GSE Rechargeable, with mains adapter, battery charger 220 V AC. Weight 0.4 kg

C416-01

C417-01

C418-01

C419-01

6

Concrete

98

C436 Permeability test TORRENT Allows the evaluation of the durability of concrete structures especially of high compressive strength concrete. During the measuring procedure, the measuring instrument and the upper concrete layer are placed in a vacuum under a vacuum cell. The pressure increase inside of the chamber cell given by the permeability of the conrete is measured. An important characteristiqc is the outer chamber of the cell. It protects from lateral air streams, which vives an important measuring accuracy. Basic equipment consists of non-volatile memory for 200 measured objects, display 128x128 LCD, interface 232C, integrated software for printing out, batteries 9V, control unit with membrane pressure regulator and pressure sensor, vacuum connection: small flange 16 KF, carrying case. Total weight 6.3 kg. Accessories C436-01 Wenner probe for the determinati9on of concrete resistance p according to Wenner. The values are stored in the display unit.

C436

C436-01

Drawing of the air flow to the two chambers of the vacuum cell

Porositester according to Karsten system For measuring the water ingress on façade surfaces C437 Vertical porositester With plate with vacuum pump for connection 12 V DC, 3 test tubes for vertical surfaces, 2 seals for vacuum plate (reserve) 6 seals for test tubes (reserve). Weight 0.9 kg. C437-01 Horizontal porositester With plate with vacuum pump for connection 12 V DC, 3 test tubes for horizontal surfaces, 2 seals for vacuum plate (reserve) 6 seals for test tubes (reserve). Weight 0.9 kg.

C437

Concrete

99

C430 Automatic concrete water permeability apparatus with four cells This fully automatic apparatus is designed to carry out water permeability tests on cubic concrete specimens max. 150 mm side and cylinder specimens max. Ø 160 mm. The specimens are submitted to hydrostatic stress for a pre-set period. The water filtering through the test specimen is directly collected and measured into a graduated cylinder. It is therefore possible to determine the permeability coefficient in cm/sec. (Darcy coefficient) by the following formula: cc x h --------AxtxP where: cc = permeated water in cm3 h = height of the specimen (cm) A = surface area of the specimen (cm2) t = time to permeate (sec.) P = hydrostatic pressure in cm of water column K= The equipment consists of a strong metallic frame holding four cells which are hot galvanized for anticorrosion protection. Each cell includes a pressure control manometer. A rechargeable compensation plenum chamber is included as part of the test. The pressure is adjustable from 0 to 30 bar (0-20 bar for model C431) and it is supplied by an automatic pump of variable supply to achieve the most suitable installation for the specimen under test. Water feed is direct from water inlet. Seal pressure obtained through special and practical seal devices which maintain and simplify the use of the machine. It is possible to use one or more cells together. The specimen's sealing system is achieved with a practical and speedy, user-friendly device. Sealing devices are not included in the standard package and must be ordered separately. 220/240 V, 50 Hz, dimensions 250x 50x130 cm, weight 240 kg.

C431

C430

C432

Acessories for model C430 and C431: Sealing device with rubber latex packing, which is between the two hot-galvanized steel collars, with bolts. C432-01 Sealing device for cubes 100 mm side C432-02 Sealing device for cubes 150 mm side C432-04 Sealing device for cylinders Ø 100 mm C432-05 Sealing device for cylinders Ø 150 mm C432-06 Sealing device for cylinders Ø 160 mm C433 Epoxy resin to isolate the lateral surfaces of the concrete specimen, can of 5 kg. C431 Automatic concrete water permeability Similar to model C430, but with two cells, suitable for carrying out tests on concrete cube specimens max. side 200 mm and cylinder specimens max. 300 mm. C435 Water impermeability tester for 3 cells Apparatus to determine the depth of penetration of the water into the concrete (impermeability) under known time and pressure. For up to 3 concrete cubic, cylindrical or prismatic specimens having max. dimensions of 20x20x20 cm. V206 Laboratory air compressor.

C435

Information

31 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

85260


You might also be interested in

BETA
senographe-data
Sweet Notes Early Fall 1998 Issue
Microsoft Word - PT IP Cam Manual _V217_051219.doc