Read C:\Documents and Settings\William Mac Donald\My Documents\My Webs\celcore\documents\eps_holeyboard_formatted.wpd text version

®

CELCORE (EPS) POLYSTYRENE HOLEY BOARD CONFIGURATION & SPECIFICATION (by various producers)

Requirements: 1. Minimum nominal density of 1 lbs/ft³.

(Meeting ASTM C 578)

2. Minimum thickness of 1 inch. 3. (8) 2 1/2" dia.(+/- 1/2") keying holes. 4. Board Dimensions; 2 ft. width by 4 ft. in length. Thickness from minimum 1" to maximum 12". Placement: 1. Boards shall be placed in a staggered

brick-like pattern.

2. The EPS boards shall be placed

immediately into a base layer of fresh cellular concrete. The boards shall be placed in such a manner as to cause full contact of the boards under surface with the plastic cellular concrete. 3. The board shall be allowed to adequately bond to the substrate prior to the placement of the topping pour.

An isometric view of EPS boards placed in a Celcore® Cellular Insulating Concrete Roof Deck System placed over a structural concrete deck (right) and a metal form deck (left).

CELCORE INCORPORATED · 3148 US Hwy 70 West · Black Mountain NC 28711

Information

C:\Documents and Settings\William Mac Donald\My Documents\My Webs\celcore\documents\eps_holeyboard_formatted.wpd

1 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

841901


You might also be interested in

BETA
Tri-PlyŽ Design & Application Instructions
Microsoft Word - 04-1411 SAMB Contractor Application Guidelines.Nov 2008.doc
untitled