Read new_standards.pdf text version

Selected New 2004 Standards: ACI

212.3R-04 302.1R-04 311.5-04 350.4R-04 351.3R-04 446.4R-04 549.2R-04 Chemical Admixtures for Concrete Guide for Concrete Floor and Slab Construction Guide for Concrete Plant Inspection and Testing of Ready-Mixed Concrete Strength Evaluation of Existing Concrete Buildings Foundations for Dynamic Equipment Report on Dynamic Fracture of Concrete Thin Reinforced Cementitious Products

ASTM

C09- Concrete and Concrete Aggregates

C39/ C39M-04 C40-04 C42/ C42M-04 C94/ C94M-04a C117-04 C123-04 C127-04 C128-04 C136-04 C157/ C157M-04 C172-04 C231-04 C232-04 C294-04 C311-04 C330-04 C331-04 C387-04 C494/ C494M-04 C496/ C496M-04 C567-04 C856-04 C873-04 C989-04 C1064/ C1064M-04 C1074-04 C1152/ C1152M-04 C1240-04 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens Standard Test Method for Organic Impurities in Fine Aggregates for Concrete Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete Standard Specification for Ready-Mixed Concrete Standard Test Method for Materials Finer than 75-µm (No. 200) Sieve in Mineral Aggregates by Washing Standard Test Method for Lightweight Particles in Aggregate Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates Standard Test Method for Length Change of Hardened Hydraulic-Cement, Mortar, and Concrete Standard Practice for Sampling Freshly Mixed Concrete Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method Standard Test Methods for Bleeding of Concrete Standard Descriptive Nomenclature for Constituents of Concrete Aggregates Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use as a Mineral Admixture in Portland-Cement Concrete Standard Specification for Lightweight Aggregates for Structural Concrete Standard Specification for Lightweight Aggregates for Concrete Masonry Units Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete Standard Specification for Chemical Admixtures for Concrete Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens Standard Test Method for Determining Density of Structural Lightweight Concrete Standard Practice for Petrographic Examination of Hardened Concrete Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete Standard Practice for Estimating Concrete Strength by the Maturity Method Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete Standard Specification for Silica Fume Used in Cementitious Mixtures

C1362-04 C1383-04 C1399-04 C1556-04 C1567-04

C1581-04

Standard Test Method for Flow of Freshly Mixed Hydraulic Cement Concrete Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method) Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage

C1582/ C1582M-04 Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete C1583-04 Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method) C1585-04 Standard Test Method for Measurement of Rate of Absorption of Water by HydraulicCement Concretes C1602/ C1602M-04 Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete C1603-04 Standard Test Method for Measurement of Solids in Water

C01- Cement

C114-04a C150-04a C191-04a C451-04 C490-04 C563-04 C806-04 C845-04 C1012-04 C1038-04 C1329-04 C1565-04 Standard Test Methods for Chemical Analysis of Hydraulic Cement Standard Specification for Portland Cement Standard Test Method for Time of Setting of Hydraulic Cement by Vicat Needle Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method) Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete Standard Test Method for Optimum SO3 in Hydraulic Cement Using 24-h Compressive Strength Standard Test Method for Restrained Expansion of Expansive Cement Mortar Standard Specification for Expansive Hydraulic Cement Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water Standard Specification for Mortar Cement Standard Test Method for Determination of Pack-Set Index of Portland Cement

Information

2 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

138865


You might also be interested in

BETA
Microsoft Word - 00_COVER
02-Vol-2 -Road Specification
Microsoft Word - Code Breakers.doc
britStand.set