Read GE_Conneaut%20IL_6pg.pdf text version

BidSpotter.com®

BidSpotter.com LIVE INTERNET BIDDING! VISIT WWW.CHARLESTONAuCTIONS.COM FOR REGISTRATION

®

CHARLESTON AuCTIONS ON-LINE MARKETPLACE

433 Council Drive, Fort Wayne, IN 46825 Lighting Plant Closing:

Our on-line market place is rapidly becoming the hottest spot to buy and sell used industrial equipment. Major Manufacturers are uploading equipment daily.

IMPORTANT INFORMATION

SALE LOCATION: 880 Maple Ave., Conneaut, Ohio 44030 DATE & TIME: The Auction will begin promptly at 9:00 AM (Local) on Wednesday, October 22nd. Preview Inspection: The items will be available for advance inspection from 9:00 AM - 5:00 PM (Local) on Tuesday, October 21st. TERMS OF SALE: A 12% Buyer's Premium will be charged on all purchases. A 15% Buyers' Premium will be charged if using a credit card. Charleston Auctions is now accepting all major credit cards. For On-Line Auction Terms, please visit bidspotter.com. All bidders must register and provide proper identification. All items are sold "as is, where is" and must be paid for IN FULL, in CASH OR CHECK, accompanied by A LETTER FROM THE PAYOR'S BANK GUARANTEEING UNQUALIFIED PAYMENT TO CHARLESTON AUCTIONS for this sale. REMOVAL: All rigging and moving companies must be pre-approved prior to sale day. No items will be removed without proof of payment. Sale day removal from conclusion of sale until 6 PM. Removal times will be from 9:00 AM to 5:00 PM Local Time on October 23th, 24th,26th & 31st. Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charge of resale, will be charged to the defaulting purchaser. Your stamped paid receipt must be shown to checkout supervision prior to removal. Although checkout supervision will be provided, the auction company and sellers are not liable for lost or stolen items purchased at the sale. DISCLAIMER AND ABSENCE OF WARRANTIES: Each potential Bidder is responsible to conduct, at their own risk and cost, their own independent inspections, investigations, inquiries, and due diligence concerning the property. Seller and Charleston, or Charleston's agents and associates, are not responsible for any warranty as to condition of property. Bidder shall be fully responsible for confirming that each item bid on is appropriate for Bidder's intended use. Neither Charleston nor Seller shall be responsible, in an way, for confirming or denying the specific identity or intended use of any item or piece of property. Inspection dates have been scheduled and will be staffed with auction personnel. Please feel free to inspect the property at any other time, so long as arranged in advance with Charleston. Bidder shall repair any damage to the Property done by Bidder, its representatives and agents, while conducting any Inspections. In addition, Bidder shall indemnify, defend and hold Seller harmless for any claims or damages suffered by Seller relating to actions taken by Bidder, its representatives and agents, while conducting any Inspections. The property is being sold on AS IS, WHERE IS basis, and no warranty or representation, either express or implied, concerning the property is made by the Seller or the Auction Company. The information contained in this brochure is subject to verification by all parties relying on it. No liability for its accuracy, errors or omissions is assumed by the Sellers or the Auction Company. GOVERNING LAW: Bidder agrees that no matter what State or Country Bidder resides, or location of the auction, all disputes or disagreements shall be construed according to the laws of the State of Indiana. Charleston Auctions Reserves the right to reschedule due to inclement weather. Items Subject to Presale.

GENERAL ELECTRIC COMPANY

Sale Location: 880 Maple Avenue, Conneaut, Ohio 44030

(Conneaut is located 75 miles Northeast of Cleveland, Ohio)

www.charlestonauctions.com

LEFT PIC: (2 OF 4) BRANSON ULTRA SONIC WELDERS RIGHT PIC: (3 OF 4) GE WIRE WINDERS

VARIOUS HERCULES LIFTING SYSTEMS & BOOMS

WEDNESDAY, OCTOBER 22nd - 9 A.M. Local Time Preview Inspection: Tuesday, October 21st, 9:00 AM-5:00 PM

880 MAPLE AVENuE, CONNEAuT, OHIO 44030

GENERAL ELECTRIC COMPANY

Lighting Plant Closing:

(Conneaut is located 75 miles Northeast of Cleveland Ohio)

OCTOBER

1 5 12 19 26 6 13 20 27 7 14 21 28 8 15 22 29 2 9 16 23 30 3 10 17 24 31 4 11 18 25

WEDNESDAY, OCTOBER 22nd, BEGINNING @ 9 AM LOCAL TIME

COMPLETE WIRE EXTRUSION LINE

MICRO VU 14" OPTICAL COMPARATOR

WWW.CHARLESTONAuCTIONS.COM

INGERSOLL RAND 300 HP ROTARY SCREW AIR COMPRESSOR

LEFT PIC: BLUE "M" OVEN RIGHT PIC: HUGE QTY. OF STANLEY VIDMAR CABINETS

HUGE QTY. OF STEEL STOCK

(2007) GAYLORD DUMPER

Sale Date: Wednesday, October 22 Beginning @ 9 AM Local Time

nd

880 MAPLE AVENuE, CONNEAuT, OHIO 44030

DRIVING DIRECTIONS

GENERAL ELECTRIC COMPANY

Lighting Plant Closing:

BRUDERER HIGH SPEED PRESS

BIDSPOTTER.COM

BID LIVE ONLINE AT

(Conneaut is located 75 miles Northeast of Cleveland, Ohio)

MAP

CONDOR ELECTRIC TELESCOPING MAN LIFT

HYSTER 5,500 LB. ELECTRIC FORK LIFT

upcoming Auctions

GENERAL ELECTRIC COMPANY APPLIANCE FACILITY CLOSING Sale Location: 1543 S. 54th Avenue Cicero, IL 60804 Sale Date & Time: Thursday Nov. 6th - 9:00 a.m. (Local Time)

LEFT PIC: LANDA HOT WATER PRESSURE WASHER RIGHT PIC: ZERO BLAST `N' PEEN BLAST CABINET

Auction Site 880 Maple Avenue

Take I 90 E Towards I ­ 271 S/Erie PA (55.6 Miles). Take The OH-7 Exit. Exit 241 Toward Conneaut/Andover Turn Left Onto OH-7 N. Turn Left Onto Hwy. 20. Follow Auction Signs! Sale Location: 880 Maple Avenue, Conneaut, OH (Conneaut is located 75 miles Northeast of Cleveland, OH).

Live Internet Bidding

BidSpotter.com®

www.bidspotter.com to register

HOTELS

Holiday Inn Express 1831 Austin Gurg Road Ashtabula, OH 44010 877-270-6397 Days Inn Conneaut 600 Days Blvd. Conneaut, OH 44030 440-593-6000 Comfort Inn 1860 Austinburg Rd. Austinburg, OH 440-257-2711

Sale Location: 880 Maple Avenue, Conneaut, Ohio 44030 Wednesday, October 22nd Beginning @ 9:00 AM Local Time Preview Inspection: Tuesday, October 21st - 9:00 AM - 5:00 PM

(1 of 3) COMPLETE VIDMAR PARTS CRIB SYSTEM

Auctioneers: Robert Charleston, Chad Olson, Adam Olson, and EJ Olson. 433 Council Drive, Fort Wayne, IN 46825 · Ohio Co., License #63199031899

1-260-373-0850 · Fax 1-260-373-0854

E-mail: [email protected] · Website: www.charlestonauctions.com

PREVIEw: TuESDAY, OCTOBER 21ST - 9:00 AM - 5 PM LOCAL TIME

PRESS & PRESS RELATED EQUIPMENT: 1991 BRUDERER High Speed Press, Model BSTA601HL, 2" Stroke, w/DORNER Motion Controls, WINTRESS `Smart Pac' 2 Die Protection, S/N RU8578 (2) 1986 BRUDERER High Speed Press, Model BSTA6011L, 2" Stroke, w/DORNER Motion Controls & WINTRESS `Smart Pac 2' Die Protection, S/N's 8305 & 8327

LEFT PIC: (1 OF 2) DOALL 20" VERTICAL BAND SAWS RIGHT PIC: (1 OF 2) HARDINGE 2ND OPERATION LATHES

SaLE: WEDNESDAY, OCTOBER 22ND - 9 AM LOCAL TIME

(2) ROCKWELL 17" Variable Speed Drill Presses, Model 17600, S/N's 1478540 & 1445921 BROWN & SHARPE O.D. Grinder, 3-Phase, Head Stock RPM 128 ­ 540, S/N 525-8144-2515 K.O. LEE Tool Grinder, Model B2060H, S/N 23451-RH PARKER MAJESTIC Hand Feed Surface Grinder, Model 618 & 612, 6 x 18 Magnetic Chuck, w/ANILAM `Mini Wizard' DRO, 612 S/N 985-SC-57, 618 S/N 1035-SC-57 AB ARBOGA Drill Press, Model GM 2508, 1,600 ­ 3,400 RPM, Variable Speed, S/N 284130 ROCKWELL Variable Speed Drill Press, Model 15-655, 450 ­ 4,700 RPM, S/N 1540725 BOYAR SHULTZ Hand Feed Surface Grinder, Model H612, 6 x 12 Magnalock Electromagnetic Chuck, S/N 220035 Lg. Qty. Of Bench, Pedestal Grinders, Buffers & Polishers ZERO BLAST-N-PEEN Blast Cabinet PLANT SERVICING EQUIPMENT: KOCH Waste Water Treatment System Consisting Of: (1) OBERLIN Pressure Filter, Model OPF-2, S/N 343MD (1) OBERLIN Slurry Tank w/TORIT Filter, Model `Slurry Tank', Has Top Feed Agitator, S/N TB3435L (1) KOCH `Konsolidator 78', 130 Degrees F Cleaning & Process Temperature - The System Information is as follows: 6,000 Gal. Per Day Capacity, Has Oil Monitor at Discharge, Lightning Mixers, (1) Concentration Tank, (1) Process Tank, (1) Equalization Tank, (1) PH Adjustment Tank, (1) Waste Water Discharge Tank INGERSOLL RAND Rotary Screw Air Compressor, Model SSR-XFE300-2S, 1,685 CFM, 300 HP, S/N EE1796U99068 2001 INGERSOLL RAND Refrigerated Compressed Air Dryer, Model TMF4000A, 3-Phase, 150 PSIG, S/N 01CTMA1973

GRINDER

THINKING OF HAVING AN AuCTION? CALL TODAY FOR A CONFIDENTIAL MEETING!

Huge Qty. Of Banding Carts, Pallet Jacks, Worktables & Benches, Floor Fans, Material Carts, Stands, Trash Cans, Fire Extinguishers, Safety Ladders, Step Ladders, Pan Shelving, Pallet Racking, Parts Totes, Etc. MATERIAL HANDLING EQUIPMENT: CONDOR Telescoping Man Lift, Electric, 36 Volt, S/N 701S722 BAKER 2,280 Lb. Electric Fork Lift, Model FTA-030, 192" Lift Height, Hard Tire, 3-Stage, Side Shift, S/N T-1915A-878 HYSTER 5,500 Lb. Electric Fork Truck, Model E60BS, 177" Lift Height, 36 Volt, Hard Tire, 3-Stage, Side Shift, 42" Forks BAKER 5,000 Lb. Electric Fork Truck, Model FTD-050, 36 Volt, Clear View Mast, 2-Stage, S/N J-18B12828 MARK LIFT Telescoping Electric Man Lift, 500 Lb. Capacity, Model P15, Platform Height 14' 8", S/N 780 (Over 10) "Like New" HERTNER & HOBART Battery Chargers, 36 & 48 Volt GORBEL 500 Lb. Floor Mounted Jib w/1/4 Electric Chain Hoist MISCELLANEOUS EQUIPMENT: (Over 200) STANLEY VIDMAR Storage Cabinets 2007 GAYLORD Dumper, Model N/A, 2,000 Lb. Capacity, S/N 67366 Huge Qty. Of Parts Crib Inventory Consisting Of: Fittings ­ Copper & Brass, Motors, Electrical, Belts, PPE, Seals, Bearings, Hydraulics ­ FAR TOO MUCH TO LIST!! Huge Qty. Of Spooled Wire (All Sizes), Switch Boxes, Buss Plugs, Control Panels & Various Other Electrical RANSOHOFF Tumbler, Gas Fired, S/N 8126 "Like New" MANITOWAC Ice Maker w/Water Dispenser, Stainless Steel Various Incline Parts Conveyor & Hopper Systems, Complete w/Steel Perforated Belts, Magnets, Updated Controls BLUE M Electric Oven, Model POM-6680G-3, 1,300 Degrees F, S/N P-32-671 BLUE M Electric Oven, Model 243618G-2, Temp. Range 2,000 Degrees F ­ 1,093 Degrees C JOHNSON Gas Furnace, Model 142K, BTU/HR 180,000 Huge Qty. Of Hydraulic Transfer Pumps, Shop Vacs, Die Lifts

(1 OF 5) ROCKWELL HARDNESS TESTERS LEFT PIC: RANSOHOFF TUMBLER, GAS FIRED RIGHT PIC: CINCINNATI SHELL WASHER (1 OF 2) MILACRON AUTOJECTORS VERTICAL PLASTIC INJECTION PRESSES

QUALITY CONTROL & INSPECTION EQUIPMENT: MICRO-VU 14" Optical Comparator, Model H-14, S/N 2882 Huge Qty. Of Inspection Equipment (I.E. Surface Plates, Height Gages & Stands, Pin & Gage Blocks, Angle Plates, Calipers, Mics, Gages, Comparators, Slopes, Etc.) (3) Inspection/Packing Stations w/FMC Controllers OFFICE EQUIPMENT: (5) Modular Offices w/Air Conditioning, Self Contained. Various sizes Lg. Qty. Of Office Equipment (I.E. Desks, Dividers, Credenzas, Refrigerators, Folding Tables, Café Seating, Folding Chairs, Mop Buckets, Etc.)

1985 BRUDERER High Speed Press, Model BSTA6011L, 2" Stroke, w/DORNER Motion Controls & WINTRESS `Smart Pac 2' Die Protection, S/N 8304 BRUDERER High Speed Press, Model BSTA50, S/N 5320 NIAGARA OBI Punch Press, Model M22A, 22 Ton Capacity, 2 ½" Stroke, 8 ½" Shut Height, 2" Adjustable Slide, 150 ­ 300 SPM, S/N 38026 HAVIR OBI Punch Press, No. 45, w/Sound Enclosure, S/N 162 BLISS OBI Punch Press, 60 Ton Capacity, 3" Adjustable Slide, 3" Stroke, 14 ¾" Shut Height, w/Sound Enclosure, S/N H59959 HP45990 (5) JACO Dereelers, Model JV2E-4016-DC-REEL, w/WADDINGTON Controls WIRE EXTRUDING & SUPPORT EQUIPMENT: (2) COMPLETE LUFKIN Wire Extruder Lines, Size = 25 V, A.G.M.A. Rating for Input Speed = 1,750 RPM, HP @ S.F.I.O. = 88, Ratio = 17.71, Output RPM = 99, Drive Gear = 29, Driven Gear = 62, S/N 362 (2) COWECO Coil Winders, Model CS, S/N's 6736 & 10114

INGERSOLL RAND REFRIGERATED AIR DRYER

OSTER 655 POWER THREADER

(1 OF 4) WIRE WINDERS

LEFT PIC: BRIDGEPORT 2 HP VERTICAL MILLING MACHINE RIGHT PIC: VARIOUS PRESSES

Huge Qty. Of Machine Tooling (I.E. Sine Plates, Chucks, Collets, Rotary Tables, Huge Qty. Of Perishable Tooling, Machine Vises, Etc.) ­ FAR TOO MUCH TO LIST!!! PLASTIC INJECTION EQUIPMENT: 2002 MILACRON Autojector Vertical Plastic Injection Machine, Model EV302.97, 45 Ton Capacity, w/ADEPT Pick & Place Robot & VERTEX NT Controls, S/N V04A0100008 1997 AUTOJECTOR Vertical Plastic Injection Press, Model WHR30-S, w/ADEPT Pick & Place Robot, 45 Ton, S/N 44409233-0387 VAN DORN 75 Ton Horizontal Plastic Injection Machine, Distance Between Tie Bars = T ­ B 13 ½", L ­ R = 16" 2002 NOVATEC Vacuum Loader, Model `Hopper', 100 Lb. Capacity, S/N 10A2545-4430 1998 NOVATEC Vacuum Loader, Model MD-25, 100 Lb. Capacity, S/N 10A1428-3925 (2) HAMILTON Plastic Granulators IMS Granulator, Model LP-49-SC

LEFT PIC: (1 OF 2) PARKER MAJESTIC SURFACE GRINDERS RIGHT PIC: BROWN & SHARPE 618 MICROMASTER SURFACE

LANDA `Gold Series' Commercial Pressure Washer, Hot Water, Model VHG-2-110250, 2.0 GPM, 1,000 PSI, 168,000 BTU Depolluter System, Model E-35, 3-Phase, 84 KW, S/N 1073 Lg. Qty. Of Blowers, Motors, Conveyor, Etc. OSTER Pipe Master Power Threader, 2" Pipe, Conduit & Bolt, Model 655, 120 Volt, S/N ACD3444 (7) Dbl. Sided Pipe & Steel Racks, w/Steel Pipe, Conduit, Rolled Steel, Channel Angle, Flat Stock ­ LOADED!

LEFT PIC: (1 OF 2) HAMILTON GRANULATORS RIGHT PIC: (1 OF 2) NOVATEC PLASTIC FEEDER SYSTEMS FEEDERS

LEFT PIC: (1 OF 5) JACO DEREELERS RIGHT PIC: BLISS OBI PUNCH PRESS

(4) GENERAL ELECTRIC Strip Wire Winding Machines, Model 101F588 (4) FLOYD Constant Tension Wind-Up Units (4) BRANSON Sonic Welders, Model 400C, S/N's WA50675E & WG60009 MACHINE SHOP EQUIPMENT: (2) DoALL Vertical Band Saws, Models 2012 & 2113, 20" Throat, 30" x 24" Tilting T-Slot Table, Blade Welder, 154" Saw Blade Length, S/N's 397-79125 & 377-82977

ROCKFORD 17" ENGINE LATHE

LEFT PIC: DO ALL VERTICAL BAND SAW RIGHT PIC: K.O. LEE TOOL GRINDER

HYDRO THRIFT Cooling Tower, Model CE1100, (2) 100 HP Drive Motors, 480 Volt, S/N 05731003 (14) Sections of Heavy Duty Pallet Racking GREENLEE 1818 Bender, ½" ­ 2"

On-line Bidding Instructions

TO PARTICIPATE, YOU MUST:

BidSpotter.com®

CHICAGO 8' PAN BRAKE

BRIDGEPORT Vertical Knee Mill, Series `I', 2 HP, Power Feed, BRIDGEPORT DRO, 9" x 42" T-Slot Table, S/N 204757 DoALL Variable Speed Drill Press, Model 25150, 85 ­ 1,460 RPM, 15" x 20" T-Slot Adjustable Table, S/N 55541 AMERICAN Hole Wizard Radial Arm Drill, 4' Arm, 9" Column, 70 ­ 2,100 RPM ROCKFORD Economy Engine Lathe, Spindle RRM = 32 ­ 804, 17" Swing, Spindle Hole = 1 ½"/D.B.C. 56", S/N 101HX93 (2) HARDINGE 2ND Operation Lathes, Model HLV-EM

LEFT PIC: NIAGARA OBI PUNCH PRESS RIGHT PIC: ROCKWELL VARIABLE SPEED DRILL PRESS

FABRICATION EQUIPMENT: CHICAGO 8' Pan Brake, Model SO612LF, S/N 311060

PEXTO 4" STOMP SHEAR

(OVER 10) VARIOUS DRILL PRESSES

Live Internet Bidding

CHICAGO 5' Finger Brake, Model 7002 PECK STOW 4' Stomp Shear, Model 152-K, 16 Ga. Soft Steel, Manual Back Gage, S/N 7/72 PECK STOW 3' Manual Rolls, Mode 390-F, 16 ­ 18 Ga. Soft Steel, S/N 3/72 (2) LINCOLN `Idealarc' 250 Arc Welders (2) Oxygen/Acetylene Torch Sets, Complete w/Hoses, Guns, Gages ­ No Tanks

PEXTO MANUAL ROLLS (1 OF 2) PARKER MAJESTIC HAND FEED SURFACE GRINDERS

BidSpotter.com®

www.bidspotter.com to register

1. Type in www.bidspotter.com (make sure nothing is after .com) 2. Find auction in upcoming auctions and click on sign up for this auction 3. Left Side ­ click on New to bidspotter.com and then click on Register 4. Fill out bidder registration 5. Exit out and re-enter on www.bidspotter.com 6. Click on Sign-up and then Sign In (already a bidspotter user) 7. Utilize User Name & Password emailed to you after registering 8. Exit out again and re-enter www.bidspotter.com 9. Click on Bid Now 10. START BIDDING! 11. Bid with Bid Now Button for faster bidding

ALL ON-LINE BIDS ARE SUBJECT TO A 15% BUYER'S PREMIUM, CASH OR CHECK. 18% BUYERS PREMIUM IF PAID BY MASTERCARD OR VISA

CHICAGO FINGER BRAKE

BROWN & SHARPE 618 `Micromaster' Grinder, 6" x 18" Electromagnetic Chuck, S/N 523-6181-9364

CINCINNATI Shell Washer, Power = 460-3-60, Controls = 115-1-60, Amps = 60, Heat = Natural Gas, S/N D-1223-C165

LEFT PIC: HUGE QTY. OF STANLEY VIDMAR PARTS

STORAGE CABINETS

RIGHT PIC: WIRE TAKE-UPS

Information

2 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

16077