Read Microsoft Word - Champ Quote Offer, 17.11.09.doc text version

Cheverton Sales & Service Ltd

Meridian House, Barreman, Clynder Dunbartonshire, Scotland, G84 0QL, U.K.

Tel: + 44 (0) 1436 831313 Fax: + 44 (0)141 5550179 e-mail: [email protected] website: www.cheverton-workboats.co.uk

Chever ton Workboats

17 November 2009

Ref: css/9007

OFFER FOR SUPPLY OF CHEVERTON 6 METRE CHAMP OPEN GRP LAUNCH

STANDARD BOAT: Hull and Deck One piece heavy duty 3kg/m2 GRP hull and ringdeck moulding with thickness increased at keel, stem and gunwhales. GRP moulded engine bearers with steel tapping plates. GRP longitudinal and transverse bottom stiffeners. 18mm marine ply floor sealed on underside with resin and overlaid with 1.8kg /m2 GRP laminate. Bulkheads and Seats GRP bow bulkhead / seat with locker and shelf. GRP aft bulkhead / seat housing fuel tank with hinged lid over. 18mm ply stiffening under both seats. GRP moulded engine box with fixed bottom part and hinged top part. Painted ply lift out panels to forward and aft lockers. Full Length Port and Starboard Side Seats moulded in GRP. Engine 16 hp Beta 599 cc, 2 cylinder, inboard diesel engine with heat exchanger and header tank, water cooled exhaust manifold, fresh and sea water pumps, cast injection bend, mechanical fuel lift pump, fuel and oil filters, sump pump, 12 volt starter, 40 amp alternator, stop solenoid, control panel with keystart, push button stop, warning lights and alarm buzzer for low oil pressure, high water temperature, no charge, and power on. Gearbox with 2:1 reduction, flexible mounts, engine test certificate, operators manual. Propeller and Shaft 3-blade fixed pitch bronze propeller on 1¼ ins diameter x 1.67m long stainless steel shaft in GRP sterntube with rubber cutless bearing outer end and traditioinal greased packing gland inboard. Flexible disc coupling connection to gearbox output flange. Fuel System 42 litre rigid plastic fuel tank with filler, vent, supply and return connections. Deck filler plate and breather fitting, fuel hoses in fire resistant flexible rubber. Water separator / filter. Engine Cooling, Exhaust, Controls, Electrics Seacock and strainer with fire resistant hose connection to engine seawater pump. Sea water cooling connection to sterntube. Water cooled rubber exhaust hose with water trap, swan neck and transom discharge skin fitting with flap. Single lever control head on aft bulkhead with flexible push / pull cables to engine. Push button stop control on engine box. Single start battery on shelf forward of engine with ignition panel on engine box. Bilge Pumping Whale Gusher Titan manual pump on aft bulkhead with flexible suction and discharge hoses to plastic skin fitting port aft. Hull and Deck Fittings D section black rubber fender round deck edge. 1 x heavy duty stainless steel mooring bollard forward and 2 aft. Stainless steel stemhead roller fitting. Painted pine floorboards forward and aft of engine. 1 x disc anode on rudder blade. Non-slip deck paint to foredeck, aft deck and sideck boarding area. Bottomsides primed and antifouled red. 10kg Brittany or similar anchor, 10m galvanised chain and 20m x anchor rope. 2 Mooring Warps. Loading Boat lifted and loaded onto customer's transport.

Price for Standard Boat as Above £17,500.00

Net, ex works, ex VAT, subject to contract

DELIVERY Delivery of a completed boat ex our works is normally achievable within 6 to 8 weeks from written acceptance of order and receipt of deposit payment. PAYMENT 50% as a deposit at time of contract and prior to starting work. 50% on completion, prior to despatch or collection. VALIDITY This offer is valid for acceptance for a period of 30 days for date of issue. TAXES AND DUTIES The above price is quoted excluding Value Added Tax which would be applicable at the prevailing rate. WARRANTY Cheverton standard terms of warranty would apply for a period of 12 months from date of despatch from the works. Cheverton Sales and Service Ltd

FRASER NOBLE - Director

OPTIONAL EXTRAS: GRP moulded forward cuddy with 4 windows, 2 handrails Manual submersible electric bilge pump Natural finish hardwood slats to forward, aft and side seats Lower D-Section Rubber from shoulders to mid length Galvanised Steel Round Bar Bilge Keels Full length aluminium stem and keel band 4 x gunwhale lifting plates and 4-Legged lifting sling Foam Insulation to inside of Engine Box 4 x Fairleads, 2 Forward and 2 Aft Buoyancy foam in bow locker, side seats and under floor Single pole mast on cuddy roof with all round white light Rev Counter, Oil pressure gauge, water temperature gauge Electric Air Horn 12Volt plug and socket for searchlight or other equipment Port, Starboard, Masthead and Stern Navigation Lights (only available if cuddy option also selected) 4 Way Switch Panel for Electrical Options

£1,245.00 £ 285.00 £ 745.00 £ 695.00 £ 625.00 £ 390.00 £ 640.00 £ 310.00 £ 175.00 £ 830.00 £ 250.00 £ 300.00 £ 355.00 £ 215.00 £ 260.00 £ 195.00

all prices are shown ex works, ex VAT, subject to contract and availability at time of order

Information

Microsoft Word - Champ Quote Offer, 17.11.09.doc

2 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

629865