Read ZYTEL 70G33L NC010 text version

Product Information

DuPontTM Zytel®

nylon resin

Zytel 70G33L NC010

®

Glass Reinforced Nylon Resin

Zytel® 70G33L NC010 is a 33% glass reinforced general purpose PA 66 resin.

Property Identification Resin Identification Part Marking Code Mechanical Stress at Break Tensile Strength -40°C (-40°F) 23°C (73°F) 77°C (170°F) Strain at Break Elongation at Break Tensile Modulus Shear Strength Poisson's Ratio Flexural Modulus Flexural Modulus Flexural Strength Deformation Under Load 50°C (122°F), 13.8MPa (2000psi) ASTM D 790 ISO 178 ASTM D 790 ASTM D 621 MPa (kpsi) MPa (kpsi) MPa (kpsi) % 0.8 ISO 527-1/-2 ASTM D 638 ISO 527-1/-2 ASTM D 732 % % MPa (kpsi) MPa (kpsi) ISO 527-1/-2 ASTM D 638 MPa (kpsi) MPa (kpsi) 214 (31.0) 186 (27.0) 110 (16.0) 3.5 3 10500 (1520) 86 (12.5) 0.39 8965 (1300) 9100 (1320) 262 (38.0) 6205 (900) 6205 (900) 207 (30.0) 124 (18.0) 86 (12.5) 5 4 8000 (1160) 200 (29.0) 140 (20.3) ISO 1043-1/-2/-3/-4 ISO 11469 PA66-GF33 >PA66-GF33< Test Method Units DAM Value 50%RH

Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc. ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm. Test temperatures are 23°C unless otherwise stated. The DuPont Oval Logo, DuPontTM, The miracles of scienceTM and Zytel® are trademarks or registered trademarks of DuPont Company. Copyright© 2004.

040412/040413

The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; these data may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise. The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publication is to be considered as a license to operate under or a recommendation to infringe any patent rights. DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products. Caution: Do not use this product in medical applications involving permanent implantation in the human body. For other medical applications see "DuPont Medical Caution Statement", H-50102.

plastics.dupont.com

1/5

Product Information

Zytel 70G33L NC010

®

Property Mechanical Notched Izod Impact Strength -40°C (-40°F) -30°C (-22°F) 23°C (73°F) Izod Impact Unnotched Izod Impact Strength -30°C (-22°F) 23°C (73°F) Unnotched Impact Notched Charpy Impact Strength -40°C (-40°F) -30°C (-22°F) 23°C (73°F) Unnotched Charpy Impact Strength -30°C (-22°F) 23°C (73°F) Thermal Deflection Temperature 0.45MPa 1.80MPa Heat Deflection Temperature 0.45MPa (66psi) 1.8MPa (264psi) Melting Temperature 10°C/min Melting Point

Test Method

Units

2

Value DAM 50%RH

ISO 180/1A

kJ/m

9 10 11 ASTM D 256 ISO 180/1U J/m (ft lb/in) kJ/m

2

10 10 15 133 (2.5) 70 90 1490 (27.9) 10 10 17 75 100

117 (2.2) 85 95

ASTM D 4812 ISO 179/1eA

J/m (ft lb/in) kJ/m2

1330 (24.9) 9 10 12

ISO 179/1eU

kJ/m2 70 85

ISO 75-1/-2

°C (°F) 261 (502) 249 (480)

ASTM D 648

°C (°F) 261 (502) 249 (480)

ISO 11357-1/-3 ASTM D 3418

°C (°F) °C (°F) 263 (505) 263 (505)

Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc. ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm. Test temperatures are 23°C unless otherwise stated.

The DuPont Oval Logo, DuPontTM, The miracles of scienceTM and Zytel® are trademarks or registered trademarks of DuPont Company. Copyright© 2 040412/040413

The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; these data may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise. The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publication is to be considered as a license to operate under or a recommendation to infringe any patent rights. DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products. Caution: Do not use this product in medical applications involving permanent implantation in the human body. For other medical applications see "DuPont Medical Caution Statement", H-50102.

plastics.dupont.com

2/5

Product Information

Zytel 70G33L NC010

®

Property Thermal CLTE, Normal -40 - 23°C (-40 - 73°F) 23 - 55°C (73 - 130°F) 55 - 160°C (130 - 320°F) CLTE, Parallel -40 - 23°C (-40 - 73°F) 23 - 55°C (73 - 130°F) 55 - 160°C (130 - 320°F) Electrical Relative Permittivity 1E2 Hz 1E6 Hz Volume Resistivity Volume Resistivity Dielectric Strength, Short Time 3.2mm (0.126in) Dielectric Strength, Step by Step Dielectric Constant 1E3 Hz 1E6 Hz Dissipation Factor 1E3 Hz 1E6 Hz Dissipation Factor 1E2 Hz 1E6 Hz

Test Method

Units

Value DAM 50%RH

ISO 11359-1/-2

E-4/C (E-4/F) 0.65 (0.36) 0.83 (0.46) 1.37 (0.76)

ISO 11359-1/-2

E-4/C (E-4/F) 0.24 (0.13) 0.18 (0.10) 0.13 (0.07)

IEC 60250 4.2 4.0 ASTM D 257 IEC 60093 ASTM D 149 ASTM D 149 ASTM D 150 4.5 3.7 ASTM D 150 0.02 0.02 IEC 60250 E-4 100 150 ohm cm ohm m kV/mm (V/mil) 20.9 (530) kV/mm (V/mil) 17.3 (440) 1E15 1E13

Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc. ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm. Test temperatures are 23°C unless otherwise stated.

The DuPont Oval Logo, DuPontTM, The miracles of scienceTM and Zytel® are trademarks or registered trademarks of DuPont Company. Copyright© 2 040412/040413

The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; these data may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise. The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publication is to be considered as a license to operate under or a recommendation to infringe any patent rights. DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products. Caution: Do not use this product in medical applications involving permanent implantation in the human body. For other medical applications see "DuPont Medical Caution Statement", H-50102.

plastics.dupont.com

3/5

Product Information

Zytel 70G33L NC010

®

Property Electrical Arc Resistance CTI 3.0mm Flammability Flammability Classification 0.71mm Oxygen Index High Amperage Arc Ignition Resistance 0.75mm High Voltage Arc Tracking Rate Hot Wire Ignition 0.71mm 1.5mm 3.0mm Temperature Index RTI, Electrical 0.71mm RTI, Impact 0.71mm RTI, Strength 0.71mm Other Specific Gravity Density Hardness, Rockwell Scale M

Test Method

Units

Value DAM 135 600 50%RH

ASTM D 495 UL 746A

s V

UL94 HB ISO 4589-1/-2 UL 746A UL 746A UL 746A % arcs >200 mm/min (in/min) s 8 6 9 UL 746B UL 746B UL 746B °C 130 °C 120 °C 130 ASTM D 792 ISO 1183 ASTM D 785 101 kg/m3 (g/cm3) 1.38 1390 (1.39) 32.2 (1.27) 24

Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc. ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm. Test temperatures are 23°C unless otherwise stated.

The DuPont Oval Logo, DuPontTM, The miracles of scienceTM and Zytel® are trademarks or registered trademarks of DuPont Company. Copyright© 2 040412/040413

The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; these data may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise. The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publication is to be considered as a license to operate under or a recommendation to infringe any patent rights. DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products. Caution: Do not use this product in medical applications involving permanent implantation in the human body. For other medical applications see "DuPont Medical Caution Statement", H-50102.

plastics.dupont.com

4/5

Product Information

Zytel 70G33L NC010

®

Property Other Taber Abrasion CS-17 Wheel, 1kg, 1000 cycles Water Absorption Immersion 24h Saturation Water Absorption Equilibrium 50%RH, 2.0mm Immersion 24h, 2.0mm Saturation, immersed Molding Shrinkage Normal, 2.0mm Parallel, 2.0mm Mold Shrinkage Flow, 1.6mm (0.063in) Flow, 3.2mm (0.126in) Flow, 6.4mm (0.25in) Transverse, 1.6mm (0.063in) Transverse, 3.2mm (0.126in) Transverse, 6.4mm (0.25in) Processing Melt Temperature Range Melt Temperature Optimum Mold Temperature Range Mold Temperature Optimum Drying Time, Dehumidified Dryer Drying Temperature Processing Moisture Content

Test Method

Units

Value DAM 50%RH

ASTM D 1044 ASTM D 570

mg 14 % 0.7 5.4

ISO 62, Similar to

% 1.8 1.2 5.7

ISO 294-4

% 1.1 0.3 % 0.2 0.3 0.5 1.0 1.0 1.1 °C (°F) °C (°F) °C (°F) °C (°F) h °C (°F) % 285-305 (545-580) 295 (565) 70-120 (160-250) 100 (210) 2-4 80 (175) <0.20

Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc. ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm. Test temperatures are 23°C unless otherwise stated.

The DuPont Oval Logo, DuPontTM, The miracles of scienceTM and Zytel® are trademarks or registered trademarks of DuPont Company. Copyright© 2 040412/040413

The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; these data may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise. The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publication is to be considered as a license to operate under or a recommendation to infringe any patent rights. DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products. Caution: Do not use this product in medical applications involving permanent implantation in the human body. For other medical applications see "DuPont Medical Caution Statement", H-50102.

plastics.dupont.com

5/5

Information

ZYTEL 70G33L NC010

5 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

137926


You might also be interested in

BETA
CRASTIN 6130 NC010
CRASTIN SK605 NC010
BICC Industrial Cables Catalog
Anixter Wire & Cable Technical Information Handbook