Read 1_0864.pdf text version

Industrial Computing & PLC's

Telemecanique PLCs

Nano Handheld Programming Devices

The handheld programmer for the Nano PLC offers programming and monitoring in List language. It can also be used to adjust variables in either the Nano or Micro PLCs. It has its own RAM memory which will store a single program for approximately on hour, and additional Flash Prom memory which will store a single program indefinitely, and the ability to add a PCMCIA card into the bottom of the unit which can store up to 6 programs. The program loader enables a program to be extracted from a Nano or a Micro PLC (up to 16K words), stored indefinitely, and then if required transferred to another Nano or Micro PLC. The simplicity of operation via a single button, and the small physical size means that this feature is extremely useful when program modifications need to be sent to a remote location, or when loading of the program into multiple PLCs is required.

INC254

Micro Digital I/O Modules

The I/O modules for the Modicon TSX Micro PLCs are supplied complete with terminal blocks, and are available in two formats Ì Full Height Modules Ì Half Height Modules With the exception of the first slot (which can only accept a full height module), one slot within the Micro PLC rack can be taken either by one full height module or by two half height modules. These can be a mix of digital, analogue, safety, or AS-i modules. The 24Vdc input modules have a switch on the card for selecting sink or source mode (PNP/NPN). Full height modules are available in the following variants Ì 32 Inputs (24Vdc) Ì 32 Outputs (Relay) Ì 16 Inputs (24Vdc) / 12 Outputs (Relay) Half height modules are available in the following variants Ì 12 Inputs (24Vdc) Ì 8 Outputs (Relay) Ì 8 Input Emergency Stop / Limit Switch Monitoring Module (Safety Relay Module)

INC247

Mftrs. List No. Order Code Programmer TFTX11071E 321-5192 EEPROM, 32K TFTXREM3216 321-5209 Program Loader TSXPRGLDR 321-5416

1+

Price Each 5+

10+

Nano Programming Software

The programming software package for the Modicon TSX Nano PLC is supplied complete with the interface cable to connect between the PC and PLC, a programming and installation manual, and the software on 36" disks. This simple user friendly software package is IEC 1131-3 compliant, and offers programming in Ladder Logic or Instruction List, and complete transfer and monitoring facilities for the PLC application, ensuring swift, programming, diagnostics, and commissioning. Ì Ì Ì Ì Ì Ì Ì IEC 1131-3 compliant Full programming in reversible Ladder Logic or Instruction List Full monitoring facilities in reversible Ladder Logic or Instruction List Ability to document program with both Symbols, and Addresses Ability to force I/O and Data Full transfer facilities between PC and PLC RAM and EEPROM Includes connection cable, disks, and manual

INC256

I/O Configuration 12 In 32 In 8 Out 32 Out 16 In, 12 Out

Size Half Full Half Full Full

Mftrs. List No. Order Code TSXDEZ12D2 321-5544 TSXDEZ32D2 329-5746 TSXDSZ08R5 321-5623 TSXDSZ32R5 321-5635 TSXDMZ28DR 321-5600

1+

Price Each 5+

10+

Safety Relay Modules

This unique module enables the substitution of a standard safety relay module, and the integration of this function into the Modicon TSX Micro PLC. The module conforms to EN 954-1, and has BG & INERIS approval. Ì Module contains a Preventa hard-wired safety relay ­ 2 N/O safety output circuits, category 3 Ì Monitoring of 1 to 4 dual (or single), normally closed contacts in pushbuttons, emergency stops or limit switches on safety guards for an emergency stop or immediate safety stop system (category 0) Ì Used to interrupt one or more emergency or safety stop control circuits in complete safety Ì Safety module independent of the Micro PLC processor Ì PLC diagnostics performance

Inputs 4 emergency stops or limit switches (dual or single contacts) 1 start button 24V 2 N/O (volt free), 1.25A Via screw terminal block

INC248

26 Industrial Computing & PLC's 864

Mftrs. List No. TLXLPL707P30E

Order Code 321-5180

1+

Price Each 5+

10+

Micro base units

Modicon TSX Micro base units come in 2 styles, either as a 2 slot non expandable rack complete with some I/O but with room to add an extra I/O module, or as an empty 3 slot rack expandable to 5 slots in which the user can configure exactly the I/O required for the application. All units have the following Ì Die Cast backplate suitable for DIN rail mounting or screw fixing Ì 24Vdc Sensor supply (400mA) on AC Powered Units Ì Solid rack with I/O module guides Ì Built in Multi purpose display allowing display of I/O, diagnostic information, AS-i node and bus data, and up to 16 of the PLC's data registers. Ì Processor reset button (recessed) Ì Memory configurable for program or data (size dependant on unit) Ì Up to 16 event tasks Ì Up to 16 PID loops Ì ASCII, Unitelway, or Modbus Slave communication via programming port The TSX3705 PLC has 28I/O as standard, and can be expanded to 60I/O, and the TSX3708 has 56I/O, and can be expanded to 88 I/O. The TSX3721 PLCs allow total user configuration and have extra features such as Ì 3 slot rack expandable to 5 slots Ì Dual programming port for connection of an HMI Ì Larger memory Ì PCMCIA memory expansion port Ì PCMCIA communications port Ì The ability to add an AS-i master module The TSX3722 PLCs again allow total user configuration and are identical to the TSX3721 PLCs, but with the addition of Ì 8 Analogue inputs, and 1 Analogue output integrated into the rack Ì A 10KHz up / down fast counter integrated into the rack Ì A 10KHz up counting fast counter integrated into the rack

INC244

Safety outputs Connection

Mftrs. List No. TSXDPZ10D2A

Order Code 321-5647

1+

Price Each 5+

10+

Analogue I/O Modules

The Analogue I/O modules for the Modicon TSX Micro PLCs are half height modules, have individually configurable channels, and are supplied complete with terminal blocks. They are programmed using true engineering units, and are available in the following formats: Ì 4 channel multirange input module (0-10V,+/- 10V, 0-5V, 0-20mA, 4-20mA, B,E,J,K,L,N,R,S,T,U type thermocouples, Pt100, Ni1000) Ì 8 Channel input module (0-10V, +/-10V) Ì 8 Channel input module (0-20mA, 4-20mA) Ì 2 Channel output module(,+/- 10V, 0-20mA, 4-20mA)

INC234

Type Mftrs. List No. Order Code 4 In TSXAEZ414 321-5659 8 In-Voltage TSXAEZ801 329-5758 8 In-Current TSXAEZ802 321-5660 2 Out TSXASZ200 321-5672

1+

Price Each 5+

10+

AS-i Master Module

The Modicon TSX Micro PLC has the versatility of hosting an integrated AS-i bus master connection via the addition of an AS-i Master module. This module enables programming of AS-i nodes and I/O just as if they were standard PLC I/O (simply using contacts and coils), so no complex programming is required. Within the PLC programming software standard Telemecanique AS-i components are selectable from a menu so configuration and programming of the entire bus is easy. Complementing the PLC is an AS-i power supply which is supplied in the same form factor as the PLC to standardise panel design.

INC235

1 free slot Supply 16IN/12 OUT 110/240V 32IN/24 OUT 110/240V 3 free slots - TSX3721 110/240V 24V 3 free slots - TSX3722 110/240V 24V

Mftrs. List No. Order Code TSX3705 028DR1 321-5428 TSX3708 056DR1 321-5430 TSX3721 001 TSX3721 101 TSX3722 001 TSX3722 101 321-5453 321-5465 321-5477 321-5489

1+

Price Each 5+ 10+

Master Power supply

Mftrs. List No. Order Code TSXSAZ10 321-5751 TSXSUPA02 321-5763

1+

Price Each 5+

10+

864

Electronic, Electrical and Mechanical

Prices are in Singapore Dollars and exclusive of GST

Information

1 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

676993