Read 4, 67-74 text version

Pushbuttons/Selectors/Pilot Lights AR22/DR22 and AR30/DR30 Accessories

Description Wrench

Type AR9A004

B

Description Protection cover

Type AR9E760 This cover protects against accidental operation. The cover lid is returned home with a spring force. (Packing is provided) Applicable type: AR22F0L, F5L, E0L, E5L, E0M, E5M, F0P F5P, E0P, E5P AR22F0R, F5R, E0R, E5R, F0S, F5S, E0S E5S, E0Y, E5Y, F0Y, F5Y AR9D797 This rubber cap protects the operator and switch machanism against dust and water. Use this cap in a dusty or moist environment. Applicable type AR22F0L, F5L, E0L,E5L, F0R, F5R AR22E0R, E5R AR9Y715 Use this metal washer when securing a operator in a 22.3mm-dia. panel cutout hole.

AF95-25

A

C

Remarks Section "A" Use this section to tighten the locking nut for mounting the operator on a panel. Water-tight cap Section "B" Use this section to tighten or remove the button or lens. Applicable type: AR22F0L, F5L, E0L, E5L, F0P, F5P, E0P, E5P DR22E3L, E3P AR30E0L, E5L, G3L, G8L DR30E3L Section "C" This is for 40mm-dia. push-lock, turn-reset type pushbutton switch. Fit the tabs on the section "C" in the grooves around the center of pushbutton, and turn the wrench to tighten or remove the button. AH9A702 Use this wrench to tighten or remove the lens of a pilot light. Applicable type DR22D0L DR30D0L, K0L Key washer

AF95-29

AF95-30

AF95-418

Wrench

Key washer

AH9Y02H Use this metal washer when securing an operator in a 30.5mm-dia. panel cutout hole.

SC-1016

SI-1030

Operator base cover AH9A321: For all types except pilot lights DR9A321-T: For pilot lights Remarks 1. This tool is used to remove contact blocks and transformer units. 2. The AH9A321 can remove round color chips of switches.

AF95-26

AR9Y002 Attach this cover to the operator base of a pushbutton switch with only one contact block (1NO or 1NC) to protect against dust.

Special tool

SG-873

Button

Type AR9C027-C AR9C028-C

Applicable type FAR, FBR FAR, FBR

AF95-21

AF98-196

MAS mark plate Lamp changer AH9A790 Remarks 1. Use this rubber wrench for mounting or removing lamps from pilot lights and illuminated pushbutton switches. 2. This wrench can be used for both LED and incandescent lamps.

AF95-22

Type AR9P019-II AR9C020-II

Applicable type FAR, FBR FAR, FBR

AF98-197

Adapter for AR22 and DR22

AR9Y008 Use this resin adapter to mount the AR22/ DR22 (switch/pilot light) in a 25.5mm-dia. cutout hole on a panel.

AF98-198

Pushbuttons/Selectors/Pilot Lights AR22/DR22 and AR30/DR30 Accessories

Description Adapter for AR22 and DR22

Type AR9Y718 Use this resin adapter to mount the AR22/ DR22 (switch/pilot light) in a 25.5mm-dia. cutout hole on a panel.

AF95-28

Description Legend plate for AR22

Type AR9P712- Color B: Black A: Partially black Legend Code 0 ON 0 0 0 2 0 0 B C D A A This aluminum legend plate is for a 22.3mm-dia. panel cutout hole. (Packing provided)

Adapter for AR30 and DR30

AR9Y003 Mount this adapter onto a 22mm-dia. command switch with a square button and a square bezel to obtain a 30mm-dia. command switch with a square button and a square bezel. Mount this adapter onto a 22mm-dia. command switch with a round button and a square bezel to obtain a 30mm-dia. command switch with a round button and a square bezel. A resin ring-packing and a locking nut are accessories of the adapter.

Blank OFF START STOP OFF-ON

SI-1032

Legend plate for AR22

AR9P711- Color B: Black A: Aluminum Legend Code 0 ON 0 0 0 2 0 0 B C D A

AF95-416

This aluminum legend plate is for a 22.3mm-dia. panel cutout hole. (Packing provided)

Wrench for AR22 and DR22

AR9A006 To mount an AR22 or DR22 command switch to a panel, use this wrench to tighten the locking nut securely. It is very easy to fit this wrench onto the locking nut. The wrench with an inside rubber-lining can be easily used with either your right or left hand. Blank OFF START STOP OFF-ON

SI-1033

A

AF96-241

Wrench for AR30 and DR30

AR9A001 To mount an AR30 or DR30 command switch to a panel, use this wrench to tighten the locking nut securely.

Legend plate for AR22 emergency stop

AR9P719-

This aluminum legend plate is for a 22.3mmdia. panel cutout hole. (Packing provided) Code 0 5 0 A

Legend Blank EMERGENCY STOP

AF95-467

Legend plate for AR22

AR9P713- Color B: Black A: Partially black Legend Blank OFF START STOP OFF-ON Code 0 ON 0 0 0 2 0 0 B C D A

This aluminum legend plate is for a 22.3mm-dia. panel cutout hole. (Packing provided)

SK-598

Blind cap

Round:

A

SI-1027

AH9Y725-B Black AH9Y725-H Gray Square: AH9Y726-B Black AH9Y726-H Gray Use this cap to cover up unused panel cutout holes For oil proof usage, use together with packing and a locking nut.

AF95-114

Pushbuttons/Selectors/Pilot Lights AR22/DR22 and AR30/DR30 Accessories

Description Jumper

Type DN9Y029 (For pilot light without transformer) DR9Y001 (For pilot light with transformer) Use this jumper to connect terminals allocated in a 30mm spacing. Rated current is 3A

AF95-27

Description Lens (For illuminated pushbutton switch and pilot light)

Type Code AR9C011AR9C012Used with AR22F0L, F5L, F0P, F5P AR22E0L, E5L, E0P, E5P AR22G4L, G9L, DR22E3L, E3P AR30E0L, E0L, E5L, G3L, G8L DR30E3L AR22M0L, M5L AR22M4L, M4P DR22D0L DR30D0L DR22F3M DR22F4M AR22E0M, E5M DR22E3M DR30K0L mark by the lens color code Red R Clear C Yellow Y

Legend plate for AR30

AR9P177- Material and color Code Material S B Brass Aluminum Color

This legend plate is for a 30.5mm-dia. panel cutout hole.

AR9C016AR9C015DR9C001DR9C126DR9C126-C AR9C014-

Silver Black Aluminum

Y-1545

A Size H : Standard S : Short size

AF89-466

Legend Blank ON OFF START STOP OFF-ON

Code 0 0 0 0 0 2

0 A B C D A DR9C002Replace the

AF94-458

Color Code Color Code

Green G

Legend plate for AR30 emergency stop

AH9P720-

This aluminum legend plate is for a 30.5mm-dia. panel cutout hole. Code 0 0 EMERGENCY STOP Pushbutton

Orange Blue A S

Legend Blank 5

SK-598

Code AR9C001AR9C002-

Used with AR22F0R, F5R, F0Y, F5Y AR30F0R, F5R AR22S1R, S2R, S3R, S6R AR30S1R, S2R, S3R, S6R AR22E0R, E5R, G0R, G3R, G8R AR22E0Y, E5Y AR30E0R, E5R, G0R, G1R, G6R AR22M0R, M5R, M3R AR30M0R, M5R, M3R AR22M4R, M4Y AR30M4R AR22F0S, F5S AR22E0S, E5S mark by the button color code Red R White W Black B Yellow Y

A AH9Y004 This cap is used to cover up unused panel cutout hole.

Blind cap (For AR30 and DR30)

AR9C003-

T-1993

AR9C007Legend plate with name plate AR009-B AR011-B Legend plate Name plate Legend plate Name plate Legend plate Name plate Name plate AR0007-B

Name plate

AR9P009-B AR9P010-B (34 × 8mm) AR9P011-B AR9P012-B (34 × 13mm) AR9P007-B AR9P008-B (27 × 16mm) Code 0 0 0 0 2 A B C D A

AR9C006AR9C004AR9C005Replace the

AF94-461

Color Code Color Code

Green G

ON OFF START STOP OFF-ON

Orange Blue A S

Pushbuttons/Selectors/Pilot Lights AR22/DR22 and AR30/DR30 Accessories

Description Button being centered of pushbutton (For V type)

Type Code AR9C020-R AR9C018-R Used with AR22V2R, AR30V2R AR22V2L, VAL AR30V2L

Description Knob

Type Code AR9M006Replace the Color Code Black B Used with AR22PR, PCR, PY, PCY AR30PR, PCR mark by the konb color code Green G Red R

AF95-32

Push-lock, turnreset pushbutton (V and Q types)

AF95-43

Code AR9C017-R AR9C008-R AR9C010AR9C019-R Replace the Color Code Color Code

AF95-31

Used with Lever AR22V2R, V2L AR30V2R, V2L AR22V4R AR22Q2R AR30Q2R AR22VAL Code mark by the button color code

AF95-42

Code AR9M007Replace the Color Black B

Used with AR22WR, WCR, WY, WCY AR30WR mark by the lever color code Green G Red R

Green G

Red R

White W Black

Yellow Cylindrical knob Y Code AR9M008Used with AR22RR, RCR, RY, RCY mark by the konb color code Green G Red R

Orange Blue A S

Replace the B Color Code AR9D001-1 AR9D001-2 AR9D002-1 AR9D002-2 Used with AR22, 1NO+1NC AR22, 2NO+2NC AR30, 1NO+1NC AR30, 2NO+2NC

AF95-44

Black B

Dust-tight case

Code

Key Code AR9C022Used with AR22JR, JCR, AR30JR, JCR

Replace the mark by the key type code. Code: A, C, D, E or F, 5 types.

AF94-464

Knob (For illuminated selector switch)

Code AR9M005Replace the Color Code Color Code

AF94-465

Used with AR22PL, PP AR30PL mark by the lens color code Red R White W Yellow Y

Green G

Orange Blue A S

Pushbuttons/Selectors/Pilot Lights AR22/DR22 and AR30/DR30 Accessories

Description Legend plate (For F type with round bezel)

Type AR9P001-W Note: This part is made of acrylic resin. Use paint or thinner compatible with resin.

Description LED lamp

Type Lamp voltage 6V AC 6V DC 12V AC/DC 15V AC/DC 24V AC/DC Replace the code Ordering code DH9L510-A DH9L510-6 DH9L510-B DH9L510-C DH9L510-E mark by the luminous color Yellow Y Y Amber A A Red R R Green G G

AF94-459

Legend plate (For E type with round bezel)

AR9P002-W Note: This part is made of acrylic resin. Use paint or thinner compatible with resin. Luminous color Code Lens color

AF94-459

Legend plate and color plate (For F type with square bezel)

DR9P241Replace the Color Code Color Code mark by the lens color code Red R White W Yellow Y

AF94-463

Luminous color Code Lens color

Orange Blue A W, A S S

Green G

Orange is available only for the DR22F4M pilot light. Lamp voltage 5V AC/DC 24V AC/DC Ordering code DH9H135 DH9H129

Orange Sky-blue A S

Incandescent lamp

Note: 1. This part is made of acrylic resin. Use paint or thinner compatible with resin. 2. White legend plates are used for DR22F3M type.

AF94-460

AF89-427

Contact block (1NO)

Standard: Overlap:

AR9B290 AR9B290-S

Legend plate and color plate (For E type with square bezel)

AR9P003-W Note: This part is made of acrylic resin. Use paint or thinner compatible with resin.

AF94-455

Contact block (1NC)

Standard: Overlap:

AR9B291 AR9B291-S

AF94-460

Legend sheet

AH9Y727 Affix this seal to the DR9P241- /AR9P003 legend plate for marking or labeling. (Thickness: 0.025mm)

AF94-455

Lamp terminal

AR9B292

AF95-34

AF94-456

Transformer unit

Primary voltage 100 to 110V AC: 115 to 127V AC: 200 to 220V AC: 230 to 254V AC: 350 to 380V AC: 400 to 440V AC: 500 to 550V AC:

Ordering code AR9T511-H AR9T511-L AR9T511-M AR9T511-Q AR9T511-S AR9T511-T AR9T511-W

AF94-457

AF95-33

Pushbuttons/Selectors/Pilot Lights AR22/DR22 and AR30/DR30 Accessories

Description Base unit for transformer separate mounting

Type AR9T003 Use this base in combination with a transformer unit. This base unit can be mounted using screws or rails.

Resistor Voltage stabilizer Device for LED lamp flickering

Resistor: AR9T519-H (110V DC) Fit this resistor when using LED of 24V DC rating with 110V DC power. Voltage stabilizer: AR9T001-E This unit allows an LED lamp of 24V DC rating to be used in a circuit with voltage from 27V to 35V (AC or DC). Flickering device: 6V AC: AR9T002-A 6V DC: AR9T002-6 12 to 24V AC: AR9T002-G 12 to 24V DC: AR9T002-E AR9R744: For all AR22 and DR22 AR9R001: For AR30F0R, F5R, E0R, E5R, AR30E0L, E5L, DR30D0L, E3L, K0L AR9R002: Other than above AR9Y730: For all AR22 and DR22 AH9Y282: For all AR30 and DR30 (Resin-standerd) AH9Y149: For all AR30 and DR30 (Rubber) Ordering code AR9Y305 Used with Contact block Lamp terminal Transformer unit Pilot light

AF95-33

Locking nut

AF94-462

Packing

AF94-462

Terminal cover

DR9Y320

AF94-466

Terminal cover IP2X terminalcompatible products

AR9B290-D (For NO contact) AR9B291-D (For NC contact) For transformer unit Primary voltage 100 to 110V AC 115 to 127V AC 200 to 220V AC 230 to 254V AC 350 to 380V AC 400 to 440V AC 500 to 550V AC Ordering code AR9T511-HD AR9T511-LD AR9T511-MD AR9T511-QD AR9T511-SD AR9T511-TD AR9T511-WD

Information

4, 67-74

6 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

297283


You might also be interested in

BETA
4, 67-74
Quick Designer User Guide
Surplus Inventory 08-2011.xls
This Specification Index is based on the Construction Specifications Institute Master List of Titles and Numbers. Omissions from sequential numbering of Sections is intentional. The organization of the Specification into Divisions and Sections is not int
QuickPanels