Read vr_fs_is_041533_sssx.pdf text version

FAIL-SAFE

DESCRIPTION

®

Fail-Safe's FS/IS surface squares were designed as low-cost, energyefficient answers to the problems of repeated replacement and down time in areas where broken lamps could increase owner liability. Their one-piece, injection-molded, UV-stabilized, polycarbonate refractors and diffusers completely surround the backplate, leaving no exposed metal. UL/cUL listed for wet locations. The FS/IS is specifically designed for use in public access areas where vandalism may occur. Ideal for building perimeters, corridors, stairwells, schools and dormitories.

S P E C I F I C AT I O N F E AT U R E S

Catalog # Project Comments Prepared by

Type

Date

Fa s te n e r s Captive, stainless steel T20 tamperproof TORX®-head screws prevent unauthorized access.

G a s ke t

Lens

S o cke t

Nominal 0.156, UV stabilized, injection-molded, impact-resistant, prismatic, polycarbonate refractor for high efficiency, low surface brightness and maximum strength.

Lamps

Fluorescent is polycarbonate, dedicated to correct lamp wattage. Incandescent is porcelain socket, copper screwshell, silicone braid, 150°C.

Ballast

Non-shrinking, double baked neoprene gasketing seals out the environment.

B a ck p l a te

By others.

Die-formed 16 ga. CRS backplate forms rigid mounting anchor. Standard white high reflectance polyester powder coat finish. Gloss: 85%; Reflectance: 93%; Hardness Minimum: 2H; Salt Spray: 500 hours.

Cooper wound HPF or NPF magnetic ballast. Electronic ballast available with some lamps fluorescent only.

Labels

UL/cUL listed for wet locations.

FS / IS

Square Compact Fluorescent Incandescent Vandal Resistant

Polycarbonate Clear Prismatic or White

12" [305mm]

12" [305mm]

MOUNTING DIMENSIONS

(4) 5/16" [8mm] Dia. Mounting Holes

SIDE DIMENSIONS

12" [305mm]

E N E R G Y D ATA

8 1/2" Sq. [216mm] 12" Sq. [305mm] 4 3/4" [121mm] For Energy Management related technical data to support the performance of this fixture series, refer to the ordering information for input wattage.

Specifications and dimensions subject to change without notice.

Consult your representative for additional options and finishes.

ADC041533 2011-04-14 09:38:53

FS / IS

O R D E R I N G I N F O R M AT I O N

SAMPLE NUMBER:FS-P-226-277-EBT2

Product Family

Lens Type

L a m p Ty p e

Vo l t a g e 2

Ballast

Options

Accessories (Order Separately)

FS =Fluorescent Luminaire IS=Incandescent Luminaire

Notes:

O=Opal Diffuser (White) P =Prismatic Refractor (Clear)

Twin Tube Fluorescent 18 =(2) 9W Lamps 5 26 =(2) 13W Lamps 5 Quad Tube 18 =18W Quad 126 =(1) 26W Quad 226=(2) 26W Quad Incandescent 150=(1) 150W Lamp 275=(2) 75W Lamps

120=120V 277=277V (Fluorescent only) UNV=120V/277V 8 Electronic Ballast EBT1=(1) Ballast for use with Compact Fluorescent Lamp EBT2=(2) Ballasts for use with Compact Fluorescent Lamp

2, 4

Electronic ballast may cause interference with other electronic devices. If interference occurs, move the device away from the product or plug/connect into a different circuit/outlet. 1 Ceiling Mount Only. 2 For specfic electronic ballast, specify brand and catalog number. 3 Grounded Convenience Outlet (GCO) or Toggle Switch (SW) invalidates UL/cUL Wet Locations Listing. 4 Electronic ballast available on quad tube only. 5 Available with magnetic ballast only. 6 GLR option only available on FS. 7 Specify voltage. 8 Electronic ballast only. Not available with EBP option.

GLR=Fuse and Holder 6 HPF =High Power Factor Capacitor Correction (PL only) For Fluorescent only ABP=Aluminum Backplate INL=Incandescent Night Light - Lamp by others EBP=Emergency Battery Pack (5405 or 2420 required ) 7

2420 =Surface Steel 2420-SW = Surface Steel with Toggle Switch 3 2425 =Decorative Visor 2135 =Decorative Ceiling Skirt 5405= Cast Aluminum PB-120 =Photocell 120V (Requires 2420 or 5405) PB-277= Photocell 277V (Requires 2420 or 5405) VRSD =T20 Center-pin tamperproof TORX® -head bit

P H OTO M E T R I C S

C a n d l e p o w e r D i s t ri b u t i o n

Candlepower

Deg. 0 5 15 25 35 45 55 65 75 85 90 172 172 181 198 218 239 226 209 164 109 93 172 185 187 205 223 236 227 214 160 111 103

70

140

Test No. 4123 IS-P-2475 Lamp=(2) 75A19 Lumens=1190 Efficiency=65.8%

210

280

350

Specifications and dimensions subject to change without notice.

Fail-Safe · Customer First Center · 1121 Highway 74 South · Peachtree City, GA 30269 · TEL 770.486.4800 · FAX 770.486.4801

ADC041533 2011-04-14 09:38:53

Information

2 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

1245485


You might also be interested in

BETA
Beaty_Sec22.qxd
0910Catalogue.indb
Guidelines on Energy Efficiency of Lighting Installations 2000 Edition
02/contents may 2000_RTO4
NewLighting.p65