Read Tellabs 8605 Access Switch text version

DATA SHEET

Tellabs® 8605 Access Switch

Compact and fully managed mobile cell site node with multiprotocol support.

Overview

The Tellabs® 8600 Managed Edge System provides a complete network solution comprising of the Tellabs® 8660 Edge Switch, the Tellabs® 8630, the Tellabs® 8620, the Tellabs® 8605 and Tellabs® 8607 Access Switches, the Tellabs® 8606 Ethernet Aggregator and the Tellabs® 8000 Intelligent Network Manager, an advanced network management system for managing the entire network and all of its connections and services. Thanks to its small size, the Tellabs 8605 switch is optimal for service providers' access networks at small traffic aggregation points or cell sites. A diverse set of different access and uplink interfaces offer cost-efficient alternatives for backhaul and provide flexibility for the future of mobile evolution. Versatile service capabilities, including support for TDM, ATM, HDLC and Ethernet connections as well as IP routing, enable the migration of 2G TDM and 3G ATM, Ethernet or IP-based networks into a single network infrastructure. The Tellabs 8605 switch has packet-based forwarding with QoS support enabling network optimization forvoice and data services. The Tellabs 8605 switch is available in different variants: The Tellabs 8605-A switch provides the main functionality as well as Abis optimization. The Tellabs 8605-B switch includes a highly accurate oscillator for adaptive timing performance in challenging conditions. The Tellabs 8605-D switch variant provides two unchannelized DS3 ports.

The Tellabs® 8605 Access Switch is ideal for small traffic aggregation or cell sites.

Access device for Ethernet and IP networks The Tellabs 8605 switch provides the necessary features and interfaces to support Ethernet and IP-based packet networking. It is a future-proof solution providing a transport solution for both the existing and the future Ethernet and IP-based mobile networks and emerging WiMAX installations. Multiservice support The Tellabs 8605 switch supports the transport of voice and data services in GSM, CDMA, CDMA-2000 EV-DO and WCDMA R99/R5 networks. Advanced quality of service features enable the differentiation of real-time voice and video services from premium and best effort data services. Multiprotocol support GSM, CDMA, CDMA-2000 EV-DO and WCDMA R99/R5 use TDM, HDLC, ATM, Ethernet and IP protocols for carrying user and signaling traffic. The Tellabs 8605 switch supports all these alternatives, enabling the convergence of existing networks into a single Ethernet and IP infrastructure. Quality of Service testing in packet networks The Tellabs 8600 system has a unique packet loop test feature that enables the testing of quality of service parameters including delay, jitter, throughput and connectivity. Delay and jitter testing is nonintrusive, therefore it can be performed even if the service is alive. Test endpoints are selected using the Tellabs 8000 manager without the need for additional hardware or site visits. The Packet Loop Test feature allows the user to confirm that the packet network meets the QoS requirements of voice, video and data services. Advanced packet network management As part of the Tellabs 8600 system, the Tellabs 8605 switch is fully end-to-end managed with the Tellabs 8000 manager. All interface, service and connection level parameters are configured remotely via the Tellabs 8000 manager's GUI-based tools. This is the primary and easiest way to configure the unit and the network.The Tellabs 8605 Access Switch is a compact and fully managed mobile cell site node withmultiprotocol support. It is designed for cost-efficient delivery of 2G and 3G voice and data servicesover the common network infrastructure.

n

n

n

Features and Benefits

Small size The height of the unit is 1RU, which enables cost-effective installations in access and cell sites where the rack space is limited. Wide temperature range The operating temperature of the Tellabs 8605 switch is -40°C to +65°C, allowing installations in cabinets without climate control. Robust synchronization Mobile networks are very sensitive to synchronization. For TDM networks the Tellabs 8605 Access Switch supports traditional line signal based synchronization. For packet-based networks the Tellabs 8605 supports IEEE1588, Adaptive timing and Synchronous Ethernet. Cost effective migration from E1 and T1 to Ethernet Most of the existing mobile base stations and Node Bs use E1/T1 interfaces. The Tellabs 8605 switch provides a cost-efficient way of converting a mobile access network from an E1/T1 TDM network to an Ethernet-based packet network.

Authorized parter Core Telecom Systems

(888) 375-8826

www.coretelecom.net

2 TELLABS 8605 ACCESS SWITCH

Specifications

Tellabs 8605 Access Switch variants

n n n n n n

Interfaces

n n

n n n n n

ATM VP/VC queuing/shaping ACL support IEEE802.1ag Ethernet OAM Y.1731 frame delay and delay variation support VLAN shaping, max. 30 shaped VLANs, 4 queues per VLAN IP load balancing to RSVP-TE tunnels RFC 4379 VCCV MPLS ping & trace route for single/multi-segment PWs

Tellabs 8605-A AC Tellabs 8605-A DC Tellabs 8605-B AC Tellabs 8605-B DC Tellabs 8605-D AC Tellabs 8605-D DC

16 x chE1/chT1 2 x unchannelized DS3 interface (Tellabs 8605-D switch: DS3 ports replace two chE1/ chT1 ports) 2 x Ethernet 10/100BASE-TX 2 x Ethernet Combo (2 x 100/1000BASE-X SFP or 2 x 10/100/1000BASE-TX) External alarm interface Station clock input

n n

n n

Physical Dimensions

n

n n

446 x 44.35 x 250 mm (w x h x d) 17.56 x 1.75 x 9.84 in (w x h x d) Rack-mountable in 19 inch rack and with additional adapters for 23 inch or 600mm racks

Management Resiliency

n n n n

n

CLI, FTP, SNMP, SSH2 Tellabs 8000 Intelligent Network Manager

1:1 RSVP-TE LSP protection Bidirectional Forwarding Detection (BFD) based LSP protection RFC 4090 Fast Reroute

Power Input

n

Safety and EMC

n n

Both -48 Vdc and +24 Vdc nominal input voltages (with the same DC Power Module). 100-240 VAC Maximum power consumption 31W

n

EN60950-1:2006 EN 300 386: 2005, EN 300 386:2008, FCC CFR 47 Part 15 Class B RTTE Directive 1995/5/EC

n n

Synchronization

n

Cooling

n

Telcordia GR-1244-CORE Stratum-3 (Tellabs 8605-B switch and Tellabs 8605-D switch variants) ITU-T G.813 option 1 (Tellabs 8605-B switch and Tellabs 8605-D switch variants) ITU-T G.813 option 2 (Tellabs 8605-A switch variant) External synchronization input Synchronous Ethernet (ITU-T G.8262) Adaptive synchronization over packet network IEEE 1588v2 Precision Time Protocol

n

Free convention cooling

n

Environmental Conditions

n

Functionality

n

n

Storage: ETS 300 019-1-1:2003-04 Class 1.1, Temperature: ­5° C to +45° C / 23° F to 113° F Transportation: ETS 300 019-1-2:2003-04 Class 2.3, Temperature: ­ 40° C to +70° C / ­40° F to +158° F Operating: ETS 300 019-1-3:2004-07 Class 3.2 (non-condensing), Temperature: ­40° C to +65° C / ­40° F to +149° F, Relative humidity: 5% to 95% (AC variant V1.0 temperature range of ­ 5° C to+45° C / 23° F to 113° F) Minimum cold bootup temperature ­20° C NEBS level 3 certification

ATM, Ethernet, HDLC, SAToP and CESoPSN pseudowires ATM VP/VC switching, ATM IMA and ATM cell concatenation MC-MLPPP VCCV and BFD N x 64kbps, E1/DS1 cross-connection IP routing IPVPN support MPLS switching PPPmux Abis optimization support in the Tellabs 8605-A switch IPv4/IPv6 dual stack routing Equal Cost Multipath (ECMP) Up to 1Gbps switching/routing capacity

n

n n n n

n

n

n n n n n n n n

Routing and signaling protocols

n n

OSPF-TE, ISIS-TE, BGP and MP-BGP LDP, RSVP-TE

n n

Traffic Management

n

DiffServ support for 7 traffic classes 4 queues in Ethernet interfaces 7 queues in E1/T1 interfaces

n n n n

n n n

802.1P/Q mapping to IP or MPLS ATM service categories: CBR, rt-VBR, nrt-VBR, UBR+, UBR

The following trademarks and service marks are owned by Tellabs Operations, Inc., or its affiliates in the United States and/or in other countries: TELLABS®, TELLABS and T symbol®, and T symbol®. Statements herein may contain projections or other forward-looking statements regarding future events, products, features, technology and resulting commercial or technological benefits and advantages. These statements are for discussion purposes only, are subject to change and are not to be construed as instructions, product specifications, guarantees or warranties. Actual results may differ materially. The information contained herein is not a commitment, promise or legal obligation to deliver any material, code, feature or functionality. It is intended to outline Tellabs' general product direction. The development, release and timing of any material, code, feature or functionality described herein remains at Tellabs' sole discretion. © 2011 Tellabs. All rights reserved. 74.1804E Rev. G 1/11

Authorized parter Core Telecom Systems

(888) 375-8826

www.coretelecom.net

Information

Tellabs 8605 Access Switch

2 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

678947


You might also be interested in

BETA
Tellabs 8605 Access Switch
Tellabs Optical LAN - Optical Line Terminals
Tellabs 8660 Edge Switch
Tellabs Global Services - EMEA Training Catalog
Tellabs 8110 Network Terminating Unit (CTU-R) Managed Broadband DSL Router FP1.3