Read Wood_Stove_Venting.pdf text version

Section 100

Class "A" Chimney & Accessories, Dampers & Caps

100

Class "A" Chimney, Dampers and Caps

Page Number Vendor Product Publish Date

100-112 113-118 119-120 121-125 126-128 129-131 132-133 133 134-136 137 137-139 140-141 142 142-143

Industrial Chimney Company (ICC) Industrial Chimney Company (ICC) Industrial Chimney Company (ICC) Simpson Dura-Vent Simpson Dura-Vent Simpson Dura-Vent Norwesco "Reliance Liner" by American Hearth HeatFab "Reliance Liner" by American Hearth Lyemance Us Fireplace Products "Reliance Liner" by American Hearth HY-C

Excel 103HT Class A Chimney 10"-24" Large Diameter (R.I.S.) UltraBlack Double Wall Black Pipe DuraPlus 2100HT Class A Chimney DVL Close Clearance Connector Dura-Black Single Wall Stove Pipe 24 Gauge Black Stove Pipe Reducers/Increasers 22 Gauge Saf-T Pipe Chimney Hatches & Single Wall Pipe Baffles Chimney Hatches & Dampers Chimney Hatches & Dampers Chimney Caps, Stainless Steel Chimney Caps

03/08 03/08 03/08 02/08 02/08 02/08 04/08 06/06 04/08 06/06 12/07 04/08 06/06 05/08

PLEASE NOTE: Stock status notations are generally applicable to the Kent, WA warehouse location, and are subject to variability. Please confirm item stock status by calling AES Inside Sales at 800-682-9722.

Associated Energy Systems :: www.aes4home.com

to order call 1-800-682-9722 :: www.aes4home.com

100

IndustrIal ChImney Company

exCel 103ht Insulated Class a ChImney

Excel Chimney is the only chimney sold in the US that meets the more stringent Canadian 30 minute chimney fire test. This means that with Excel, your customers are getting the safest chimney on the market. There are no couplings on the ends of Excel 103HT. Eliminating the coupling also eliminates the thermal bridge between the flue and the casing. With Excel 103HT, the insulation runs continuously from section to section. As a result, there are no hot spots. With the continuous weld of Excel 103HT, there are only two thicknesses of materials, and only 1/4" of overlap. This allows the flue to expand and contract uniformly around its circumference. The continuous weld on Excel 103HT is totally watertight, eliminating a potential source of chimney corrosion. Excel 103HT "Smart Parts" make it the easiest chimney system available to install and inventory. 6" Excel 103HT only requires a 10" hole in the ceiling when used with its round or square support. Most brands require a 12" hole. Since roof trusses and floor joists rarely line up with the desired chimney location, a smaller support almost always makes the installation easier. Excel 103HT is the first insulated chimney to offer adjustable lengths. Adjustable lengths relieve many installation headaches by allowing unlimited center-to-center offsets, easy balancing of cap heights, and painless overall length adjustment. Adjustable wall supports allow for variations in wall finish, virtually eliminating bracing and blocking. The Excel 103HT wall support installs above the insulated tee which virtually allows it to be screwed to the framing instead of anchored into concrete. Excel roof supports, wall supports, offset supports and roof braces adjust to fit 6, 7 and 8 inch chimney. Excel is protected by a comprehensive lifetime warranty. The warranty provides for full replacement of any chimney lengths damaged as a result of normal wood stove or fireplace operation (including chimney fires) for a period of ten years from the date of installation. See installation guide for details.

Class "A" Chimney, Dampers and Caps

Industrial Chimney Company manufactures product from 5" up to 24" inner diameter. For pricing and availability, call AES Inside Sales.

dealer showroom dIsplay Items

An instructional guide for your showroom. Highlights the safety features and most commonly used parts of Excel 103HT chimney for your customers. Comes complete with all venting components and signage. Footprint is approximately 2'D x 3'W.

Item No. Description Wt. Retail

ICZZ6DISPLAY

ICC Chimney Pipe Showroom Display

200 lbs

$1,064.20

100

03/08

Prices Subject to Change Without Notice

Stock & Freight: *Non-stock **Limited stock Cannot ship U.P.S. Oversize U.P.S. ¥No U.P.S. Freight Program

to order call 1-800-682-9722 :: www.aes4home.com

IndustrIal ChImney Company

exCel 103ht Insulated Class a ChImney

100

Class "A" Chimney, Dampers and Caps

Typical Offset, Two Story Installation

Typical Main Floor Installation

Typical Cathedral Installation

101

Associated Energy Systems, Serving you with warehouses in: Kent, WA :: West Sacramento, CA :: Denver, CO

03/08

to order call 1-800-682-9722 :: www.aes4home.com

100

IndustrIal ChImney Company

exCel 103ht Insulated Class a ChImney

Class "A" Chimney, Dampers and Caps

Typical Through-Wall Installation

Typical Interior 2-story Freestanding Installation

Typical Zero-Clearance Installation

Insulated Lengths

Excel chimney sections are available in 48", 24", 18", 12" and 6" lengths as well as an 18" adjustable length. This unique part enables an installer to adjust the system to the exact overall length required for any installation. The most common applications are between elbows to achieve any required center-to-center offset. This balances the chimney height when necessary so that the caps line up for functional or aesthetic reasons. Also used when a specific horizontal offset is required. The adjustable length must be installed above a straight chimney section. It will not adjust into an elbow or tee.

Tee

The insulated tee may be used on the interior or exterior of the building and in combination with a wall support assembly. Tee cap has a handle on the bottom to simplify removal for cleaning.

Adjustable Length

Elbows

Excel elbows are available in 15, 30, and 45 degrees. All Excel elbows are tested and listed to the UL 103HT and ULC S629 standards. Please consult your local inspector before using 45 degree elbows. Tee

Round and Square Supports

Excel 103HT ceiling supports are suitable for use on all flat or sloping ceilings. They must project into the room a minimum of 3 inches on a flat ceiling. These supports are designed to act as a combination of support and attic radiation shield. To use either support as an attic radiation shield, simply close the open area at the top of the support (in the attic) with a storm collar. The trim collars are separate from the supports allowing for easy installation before or after the ceiling finish is applied. Square supports include a black end cap and trim ring.

Elbow

Support Extensions

Support extensions are available to facilitate installations on very steep pitched ceilings, or where the chimney must project unusually far into the room. Both the round and square support extensions are 24" long.

Flue Extension

The flue extension fastens to the bottom of the first chimney section with three screws making it possible to connect a stove pipe, or other type of connector to the chimney. It is sometimes used to connect Excel chimney directly to an appliance.

Prices Subject to Change Without Notice

102

03/08

Square Support

Stock & Freight: *Non-stock **Limited stock Cannot ship U.P.S. Oversize U.P.S. ¥No U.P.S. Freight Program

to order call 1-800-682-9722 :: www.aes4home.com

IndustrIal ChImney Company

exCel 103ht Insulated Class a ChImney

100

Wall Radiation Shield

The wall radiation shield is used when the chimney passes horizontally through a combustible wall. The WRS telescopes to adjust for wall thickness, so no painting is required. The inside trim collar is separate from the WRS, allowing for easy installation before or after the wall finish is applied. Includes a flue extension and trim ring.

Class "A" Chimney, Dampers and Caps

Wall Support/Wall Band

The wall support is used to support the vertical chimney on a through-the-wall installation. It installs on the first section of the chimney above the tee (not on the tee itself) thus making it easier to fasten the support to framing instead of into concrete. It is a universal design made to slide in and out to fit a variety of wall profiles. An Extended Wall Support is available (in place of the standard Wall Support) for installations requiring added extension flexibility. Wall Radiation Shield

Trim Rings

Used to finish round supports. Chimney Trim Rings are used to finish chimney pipe with no support.

Locking Band

All Excel 103HT insulated components are designed to be fastened together with the stainless steel screws provided with each part. In some cases, it may be desirable to install a locking band. The locking band is designed to overlap the two beads immediately above and below the chimney joint and fasten with a 1/4" bolt.

Wall Band

Wall Channel

The wall channel enables a wall support or wall band to be fastened solidly to the framing when the framing centers don't line up with the chimney opening. The wall channel is 24" long. Trim Ring

Roof Support

The roof support is primarily used when it is difficult to use a round or square support in a cathedral ceiling. It can also be used above an offset, or to provide additional support when the chimney height exceeds the capacity of the primary support. The roof support utilizes a universal band, and is made with adjustable brackets allowing it to adjust easily to any roof pitch.

Roof Support

Offset Support

The offset support is primarily used to re-support the chimney above an offset, however it may also be used to provide additional support when the chimney height exceeds the capacity of the primary support. The offset support straps are 24" long.

Roof Brace

The roof brace is used to provide lateral support for a chimney which extends more than 5 feet above a roof. The roof brace utilizes a universal band to fit 6, 7 and 8 inch chimneys. The arms on the roof brace telescope from 5 feet to 10 feet long. Radiation Shield

Radiation Shield

The radiation shield is used to protect combustible framing in the floor or ceiling adjacent to the chimney. It serves as a firestop spacer to prevent a fire from traveling through the opening between the chimney and the framing. Use the Insulated Radiation Shield for energy efficient construction.

103

Associated Energy Systems, Serving you with warehouses in: Kent, WA :: West Sacramento, CA :: Denver, CO

03/08

to order call 1-800-682-9722 :: www.aes4home.com

100

IndustrIal ChImney Company

exCel 103ht Insulated Class a ChImney

Anchor Plate

The anchor plate is used to fasten an Excel chimney system to a masonry fireplace or extend an existing masonry chimney.

Class "A" Chimney, Dampers and Caps

Snow Wedge

Protects from heavy snow load. Fasten to plywood or backing with a minimum of 8 screws. Tabs on wedge are adjustable from 4/12 roof pitch up to 12/12.

Rain Cap

Excel rain caps are made entirely of stainless steel. The dome is designed to shed rain and debris, while optimizing draft. Excel chimneys must be installed with an Excel rain cap. The deluxe cap also has a skirt to deflect wind and a stainless steel band to reduce the entry of driving rain. An optional spark screen is available to help arrest sparks in installations where they may pose a safety problem. The rain cap is very easy to install and to remove for cleaning and is held in place by four screws through the tabs provided into the chimney.

Snow Wedge

Revolving Rain Cap

The revolving rain cap helps to prevent the entry of wind driven rain and helps to prevent wind induced downdrafts.

Regular Rain Cap

Deluxe Rain Cap

The deluxe cap is made from .025" thick type 304 stainless steel and carries a lifetime 100% full replacement warranty.

Rain Cap Base

The bottom portion only of the rain cap to allow for a custom chimney top termination.

Spark Screen

Used in conjunction with a rain cap for spark protection.

Revolving Rain Cap

Decorative Caps - Round & Square

The decorative caps are designed to simulate terra cotta chimney pots for superior aesthetics when terminating a site fabricated chase. They can also be used to terminate a chimney liner in a masonry chimney. A decorative cap flashing is required. NOTE: The installation requirements for these caps are quite specific and should be reviewed before constructing the chase.

Flexible Base Flashing

The flexible base flashing combines a stainless steel cone with a flexible lead base which can be easily formed on site to match virtually any roof profile. It was designed for masonry tile roofs but can be used wherever a flexible base is required.

Decorative Caps

Decorative Cap Flashing

The decorative cap flashing is made from galvalume steel only and is required with the decorative cap. Flexible Base Flashing

104

03/08

Prices Subject to Change Without Notice

Stock & Freight: *Non-stock **Limited stock Cannot ship U.P.S. Oversize U.P.S. ¥No U.P.S. Freight Program

to order call 1-800-682-9722 :: www.aes4home.com

IndustrIal ChImney Company

exCel 103ht Insulated Class a ChImney

Flashings

Standard flashings are available in a variety of configurations to suit various chimney diameters, roof slopes and installation types. Ventilated flashings are intended for mobile home use and for installations where the chimney is enclosed in the attic. All flashings include a collar.

100

Class "A" Chimney, Dampers and Caps

Metal Roof Flashings

Metal roof flashings are designed to be easily installed on most metal roof profiles. These flashings are offered in a variety of configurations to suit most roof slopes. Offered in galvalume only.

Flat Flashing

Weatherband Cap w/Adapter

Metal Roof Flashing

Peak Flashing

Reliance Liner Stainless Steel Flashings - See Page 304

Ideal for coastal areas with highly corrosive environments. 30" x 30" base.

ICC Qualifies For FREE FREIGHT,

5" exCel 103ht Insulated Class a ChImney (5" I.d. - 7" o.d.)

IndustrIal ChImney Company

See pg. J.

5" Insulated Lengths

Item No. S&F Description WT (lbs.) Retail

ICXC5EL48 ICXC5EL24 ICXC5EL18 ICXC5ELA18 ICXC5EL12 ICXC5EL6 5" Tees and Elbows ICXE5ETI ICXE5EITC ICXE5EE15 ICXE5EE30 ICXE5EE45

* * * * * * * * * * *

48" Length 24" Length 18" Length 18" Adjustable Length 12" Length 6" Length Insulated Tee w/plug Insulated Tee cap (optional) 15° Elbow 30° Elbow 45° Elbow *Approved for Canada Only*

18 9 5 7 5 3 4 2 2 2

$192.10 113.30 82.20 113.30 71.10 65.50 205.40 58.90 107.70 156.60 166.50

Adjustable Length

Please see pages 101 - 105 for detailed item descriptions and installation diagrams.

Elbow

105

Associated Energy Systems, Serving you with warehouses in: Kent, WA :: West Sacramento, CA :: Denver, CO

03/08

to order call 1-800-682-9722 :: www.aes4home.com

100

5" exCel 103ht Insulated Class a ChImney (5" I.d. - 7" o.d.)

Class "A" Chimney, Dampers and Caps

IndustrIal ChImney Company

5" Supports

Item No. S&F Description WT (lbs.) Retail

ICXM5ERDS ICXM5ES ICXM5ESR ICXM5EWS ICXM5EOS ICXM56ERDSE

* * * * *

Round Support Galvanized Ceiling Support Roof Support Wall Support Offset Support Round Support Extension

16 12 7 6 4 15 18 1 1 4 1 3 11 3 2 1 1

$103.30 68.90 56.70 53.30 30.00 46.30 80.00 45.60 30.00 42.20 54.40 30.00 46.70 101.10 50.00 60.00 21.10 48.90

5" Support Trims and Extensions 5" Accessories

ICXM5ERB ICXMEAS ICXMEWC ICXM5EX ICXM5EAP ICXMESSS * Roof Brace * Adjustable Support Stud Wall Channel * Flue Extension - black * Anchor Plate * Stainless Tek Screws (150) * Regular Radiation Shield * Wall Radiation Shield* * Roof Radiation Shield * Regular Rain Cap Spark Screen - Stainless Steel * Wind Shield

Please see pages 101 - 105 for detailed item descriptions and installation diagrams.

5" Firestops

ICXM5ERS ICXM5EWRS ICXM5ERRS

5" Caps

ICXM5ERC ICXMERCS ICXMERCW

5" Flashings

A storm collar is included with all ICC flashings. ICXF5EF * Flat Flashing ICXF5EFA * Flashing, 1/12-7/12 ICXF5EFB * Flashing, 8/12-12/12 ICXF5EFC * Flashing, 12/12-21/12 ICXF5EMFA * Metal Roof Flashing, 1/12-7/12 ICXF5EMFB * Metal Roof Flashing, 8/12-12/12 ICXF5EMFC * Metal Roof Flashing, 12/12-21/12 ICXMESC Storm Collar ICXMECR Caulking Roll 6 6 8 8 6 8 8 1 1 62.20 62.20 65.50 87.70 92.20 95.50 118.80 24.50 5.60

106

03/08

Prices Subject to Change Without Notice

Stock & Freight: *Non-stock **Limited stock Cannot ship U.P.S. Oversize U.P.S. ¥No U.P.S. Freight Program

to order call 1-800-682-9722 :: www.aes4home.com

6" exCel 103ht Insulated Class a ChImney (6" I.d. - 8" o.d.)

6" Insulated Lengths

Item No. S&F Description WT (lbs.) Retail

IndustrIal ChImney Company

100

ICXC6EL48 ICXC6EL24 ICXC6EL18 ICXC6ELA18 ICXC6EL12 ICXC6EL6 ICXE6ETI ICXE6EITC ICXE6EE15 ICXE6EE30 ICXE6EE45 ICXC6EL48G ICXC6EL24G ICXC6EL18G ICXC6ELA18G ICXC6EL12G ICXC6EL6G ICXE6EE15G ICXE6EE30G ICXE6EE45G ICXE6ETIG

48" Length 24" Length 18" Length 18" Adjustable Length 12" Length 6" Length Insulated Tee w/Plug * Insulated Tee cap (optional) 15° Elbow 30° Elbow 45° Elbow *Approved for Canada Only* * * * * * * * * * * 48" Length 24" Length 18" Length 18" Adjustable Length 12" Length 6" Length 15° Elbow 30° Elbow 45° Elbow 6" Tee w/plug

18 9 7 5 3 4 4 2 2 2 18 9 7 5 3 3 2 2 2 4 16 22 14 12 7 6 6 6 4 14 1 1 1 15 13 1 1 1 1 18 1 1 1 4 1 1

$213.20 125.50 92.20 125.50 78.90 73.30 228.70 64.40 119.90 174.30 185.40 182.10 106.60 77.70 106.60 66.60 62.20 119.90 174.30 185.40 228.70 109.90 188.70 115.50 68.90 62.20 53.30 99.90 73.30 33.30 118.80 47.80 47.80 47.80 48.90 38.90 38.90 47.80 47.80 47.80 105.50 172.10 46.50 30.00 46.70 54.40 216.50 18.80 30.00

Class "A" Chimney, Dampers and Caps

6" Tees and Elbows

Length

6" Galvalume Components Available Within California Only

Adjustable Length

Please see pages 101 - 105 for detailed item descriptions and installation diagrams.

6" Supports

ICXM6ERDS ICXM6ERDSI ICXM6ESS ICXM6ES ICXMESR ICXMEWS ICXMEWSE ICXMEWSR ICXMEOS ICXM6ESS12 ICXM6ERTA ICXM6ERTB ICXM6ERTC ICXM56ERDSE ICXM6ESSE ICXM6ECT ICXM6ECTA ICXM6ECTB ICXM6ECTC Round Support * Insulated Round Support Square Support Box, Framing 10" x 10" * Galvanized Ceiling Support Roof Support Wall Support/Wall Band Combined Extended Wall Support, 12.5" to 18.5" Wall Support (Old Style) Offset Support, 24" long Square Support Box, Framing 12" x 12" Round Support Trim Ring, 1/12-4/12 Round Support Trim Ring, 4/12-8/12 Round Support Trim Ring, 8/12-12/12 Round Support Extension, 24" long Square Support Extension, 24" long Flat Chimney Trim Ring Chimney Trim Ring, 1/12-4/12 Chimney Trim Ring, 4/12-8/12 Chimney Trim Ring, 8/12-12/12 Roof Brace Adjustable Snow Wedge * Adjustable Support Stud Wall Channel Black Flue Extension Square Anchor Plate * Anchor Plate Damper Locking Band * Stainless Tek Screws (150)

Tee

Elbow

6" Support Trims and Extensions

Round Support

6" Accessories

ICXMERB ICXMESW ICXMEAS ICXMEWC ICXM6EX ICXM6EAP ICXM6EAPD ICXM6ELB ICXMESSS

Snow Wedge

107

03/08

Associated Energy Systems, Serving you with warehouses in: Kent, WA :: West Sacramento, CA :: Denver, CO

to order call 1-800-682-9722 :: www.aes4home.com

100

6" EXCEL 103HT INSULATED CLASS A CHIMNEY (6" I.D. - 8" O.D.)

Class "A" Chimney, Dampers and Caps

INDUSTRIAL CHIMNEY COMPANY

6" Firestops

Item No. S&F Description WT (lbs.) Retail

ICXM6ERS ICXM6EWRS ICXM6EWRSI ICXM6ERRS ICXM6ERSC ICXM6EWRSI30 ICXM6EWRSI45

* * * * *

Radiation Shield Wall Radiation Shield Insulated Wall Radiation Shield Roof Radiation Shield Cathedral Radiation Shield Angled Firestop Angled Firestop

3 11 17

$52.20 112.20 188.70 50.00 90.00 159.90 159.90 63.30 82.20 18.90 21.10 48.90 145.50 182.10 210.90 103.30 78.90 116.60

6" Caps

ICXM6ERC ICXM6EDRC ICXM6ERCB ICXMERCS ICXMERCW ICXM6EDCR ICXM6EDCS ICXM6ERRC ICXM6EDRCSS ICXM6ERCSS RM6WBICC Regular Rain Cap Deluxe Rain Cap Rain Cap Base Stainless Spark Screen * Universal Wind Shield Decorative Cap - Round Decorative Cap - Square Revolving Rain Cap (Add ICXMERCS if Sparkscreen is desired) * Deluxe Cap with Screen * Regular Cap with Screen Stainless Steel Weatherband Cap with Adapter 2 2 1 1

Wall Radiation Shield

Regular Rain Cap

Please see pages 101 - 105 for detailed item descriptions and installation diagrams.

Decorative Caps

6" Flashings

A storm collar is included with all ICC flashings. ICXF6EF Flat Flashing ICXF6EFA Flashing, 1/12-7/12 ICXF6EFB Flashing, 8/12-12/12 ICXF6EFC Flashing, 12/12-21/12 ICXF6EDCF Decorative Cap Flashing ICXF6ELFA Flexible Base Flashing, 1/12-7/12 ICXF6ELFB Flexible Base Flashing, 8/12-12/12 ICXF6EMFA Metal Roof Flashing, 1/12-7/12 ICXF6EMFB Metal Roof Flashing, 8/12-12/12 ICXF6EMFC Metal Roof Flashing, 12/12-21/12 ICXF6EVF Vented Flat Flashing ICXF6EVFA Vented Flashing, 1/12-7/12 ICXF6EVFB Vented Flashing, 8/12-12/12 ICXF6EVFC Vented Flashing, 12/12-21/12 ICXF6EFP Peak Flashing ICXF6ESF Stainless Steel Flat Flashing ICXF6ESFA Stainless Steel Flashing, 1/12-7/12 ICXF6ESFB Stainless Steel Flashing, 8/12-12/12 ICXF6ESFC Stainless Steel Flashing, 12/12-21/12 ICXMESC Universal Storm Collar ICXMESSC Universal Stainless Steel Storm Collar ICXMECR Caulking Roll RM6FA * Stainless Steel Flashing, 1/12-7/12 RM6FB * Stainless Steel Flashing, 8/12-12/12 6 6 6 8 68.90 68.90 73.50 97.70 58.90 321.90 321.90 99.00 103.30 127.70 94.40 94.40 97.70 123.30 97.70 127.70 127.70 135.50 165.40 24.50 37.80 5.60 81.70 100.70

Revolving Rain Cap

6 6 6 6 8 8 8 8 1 2 1

Flat Flashing

Flexible Base Flashing

Metal Roof Flashing

108

03/08

Prices Subject to Change Without Notice

Stock & Freight: *Non-stock **Limited stock Cannot ship U.P.S. Oversize U.P.S. ¥No U.P.S. Freight Program

to order call 1-800-682-9722 :: www.aes4home.com

7" exCel 103ht Insulated Class a ChImney (7" I.d. - 9" o.d.)

7" Insulated Lengths

Item No. S&F Description WT (lbs.) Retail

IndustrIal ChImney Company

100

ICXC7EL48 ICXC7EL24 ICXC7EL18 ICXC7ELA18 ICXC7EL12 ICXC7EL6 ICXE7ETI ICXE7EITC ICXE7EE15 ICXE7EE30 ICXE7EE45 ICXC7EL48G ICXC7EL24G ICXC7EL18G ICXC7ELA18G ICXC7EL12G ICXC7EL6G ICXE7EE15G ICXE7EE30G ICXE7EE45G ICXE7ETIG

48" Length 24" Length 18" Length 18" Adjustable Length 12" Length 6" Length Insulated Tee w/Plug * Insulated Tee cap (optional) 15° Elbow 30° Elbow 45° Elbow *Approved for Canada Only* * * * * * * * * * * 48" Length 24" Length 18" Length 18" Adjustable Length 12" Length 6" Length 15° Elbow 30° Elbow 45° Elbow 7" Tee w/plug

20 10 8 8 5 3 5 6 6 6 18 9 7 8 3 3 2 2 2

$275.30 155.40 108.80 155.40 93.30 87.70 294.20 71.10 136.60 181.00 204.30 234.30 132.10 92.20 132.10 80.00 74.40 136.60 181.00 204.30 294.20 112.20 199.80 117.70 73.30 62.20 53.30 99.90 73.30 33.30 47.80 47.80 47.80 52.20 43.30 38.90 47.80 47.80 47.80 105.50 172.10 45.60 30.00 48.90 65.50 216.50 20.00 30.00 Length

Class "A" Chimney, Dampers and Caps

7" Tees and Elbows

7" Galvalume Components - Available Within California Only

Please see pages 101 - 105 for detailed item descriptions and installation diagrams.

Adjustable Length

7" Supports

ICXM7ERDS ICXM7ERDSI ICXM7ESS ICXM7ES ICXMESR ICXMEWS ICXMEWSE ICXMEWSR ICXMEOS ICXM7ERTA ICXM7ERTB ICXM7ERTC ICXM7ERDSE ICXM7ESSE ICXM7ECT ICXM7ECTA ICXM7ECTB ICXM7ECTC Round Support * Insulated Round Support Square Support Box * Galvanized Ceiling Support Roof Support Wall Support/Wall Band Combined Extended Wall Support (12.5" to 18.5") Wall Support (Old Style) Offset Support, 24" long Round Support Trim Ring, 1/12-4/12 Round Support Trim Ring, 4/12-8/12 Round Support Trim Ring, 8/12-12/12 Round Support Extension, 24" long Square Support Extension, 24" long Flat Chimney Trim Ring Chimney Trim Ring, 1/12-4/12 Chimney Trim Ring, 4/12-8/12 Chimney Trim Ring, 8/12-12/12 Roof Brace Adjustable Snow Wedge * Adjustable Support Stud Wall Channel Black Flue Extension Square Anchor Plate * Anchor Plate Damper Locking Band * Stainless Tek Screws (150) 16 22 15 7 6 6 4 1 1 1 15 14 1 1 1 1 18 1 1 4 1 Tee

7" Support Trims and Extensions

ICC

Elbow

Qualifies For FREE FREIGHT, See pg. J.

7" Accessories

ICXMERB ICXMESW ICXMEAS ICXMEWC ICXM7EX ICXM7EAP ICXM7EAPD ICXM7ELB ICXMESSS

Round Support

Snow Wedge

109

Associated Energy Systems, Serving you with warehouses in: Kent, WA :: West Sacramento, CA :: Denver, CO

03/08

to order call 1-800-682-9722 :: www.aes4home.com

100

7" exCel 103ht Insulated Class a ChImney (7" I.d. - 9" o.d.)

Class "A" Chimney, Dampers and Caps

IndustrIal ChImney Company

7" Firestops

Item S&F Description WT (lbs.) Retail

ICXM7ERS ICXM7EWRS ICXM7EWRSI ICXM7ERRS ICXM7ERSC ICXM7EWRSI30 ICXM7EWRSI45

* * * * *

Radiation Shield Wall Radiation Shield Insulated Wall Radiation Shield Roof Radiation Shield Cathedral Radiation Shield Angled Firestop Angled Firestop Regular Rain Cap Deluxe Rain Cap Rain Cap Base Stainless Spark Screen Universal Wind Shield Decorative Cap - Round Decorative Cap - Square Revolving Rain Cap (Add ICXMERCS if Sparkscreen is desired) Deluxe Rain Cap w/screen Stainless Steel Weatherband Cap with Adapter Stainless Steel Wind Directional Cap with Adapter

3

$60.00 114.40 199.80 54.40 99.90 159.90 159.90 71.10 103.30 20.00 21.10 48.90 161.00 189.90 210.90 125.50 130.40 143.10

Wall Radiation Shield

7" Caps

ICXM7ERC ICXM7EDRC ICXM7ERCB ICXMERCS ICXMERCW ICXM7EDCR ICXM7EDCS ICXM7ERRC ICXM7EDRCSS RM7WBICC RM7WDICC * * * 2 2 1 1

*

Regular Rain Cap

Please see pages 101 - 105 for detailed item descriptions and installation diagrams.

Decorative Caps

7" Flashings

A storm collar is included with all ICC flashings. ICXF7EF Flat Flashing ICXF7EFA Flashing,1/12-7/12 ICXF7EFB Flashing, 8/12 to 12/12 ICXF7EFC Flashing, 12/12 to 21/12 ICXF7EDCF Decorative Cap Flashing ICXF7ELFA Flexible Base Flashing, 1/12 to 7/12 ICXF7ELFB Flexible Base Flashing, 8/12 to 12/12 ICXF7EMFA Metal Roof Flashing, 1/12 to 7/12 ICXF7EMFB Metal Roof Flashing, 8/12 to 12/12 ICXF7EMFC Metal Roof Flashing, 12/12 to 21/12 ICXF7EVF Vented Flat Flashing ICXF7EVFA Vented Flashing, 1/12 to 7/12 ICXF7EVFB Vented Flashing, 8/12 to 12/12 ICXF7EVFC Vented Flashing, 12/12 to 21/12 ICXF7EFP Peak Flashing ICXF7ESF Stainless Steel Flat Flashing ICXF7ESFA Stainless Steel Flashing, 1/12 to 7/12 ICXF7ESFB Stainless Steel Flashing, 8/12 to 12/12 ICXF7ESFC Stainless Steel Flashing, 12/12 to 21/12 ICXMESC Universal Storm Collar ICXMESSC Universal Stainless Steel Storm Collar ICXMECR Caulking Roll RM7FA * Stainless Steel Flashing, 1/12-7/12 RM7FB * Stainless Steel Flashing, 8/12-12/12 6 6 6 8 80.00 80.00 84.40 108.80 58.90 321.90 321.90 111.00 114.40 139.90 112.20 112.20 115.50 141.00 108.80 136.60 136.60 144.30 181.00 24.50 37.80 5.60 89.10 107.10

Revolving Rain Cap

6 6 6 6 8 8 8 8 1 2 1

Flexible Base Flashing

Metal Roof Flashing

Peak Flashing

110

03/08

Prices Subject to Change Without Notice

Stock & Freight: *Non-stock **Limited stock Cannot ship U.P.S. Oversize U.P.S. ¥No U.P.S. Freight Program

to order call 1-800-682-9722 :: www.aes4home.com

8" exCel 103ht Insulated Class a ChImney (8" I.d. - 10" o.d.)

8" Insulated Lengths

Item No. S&F Description WT (lbs.) Retail

IndustrIal ChImney Company

100

ICXC8EL48 ICXC8EL24 ICXC8EL18 ICXC8ELA18 ICXC8EL12 ICXC8EL6 ICXE8ETI ICXE8ITC ICXE8EE15 ICXE8EE30 ICXE8EE45 ICXC8EL48G ICXC8EL24G ICXC8EL18G ICXC8ELA18G ICXC8EL12G ICXC8EL6G ICXE8EE15G ICXE8EE30G ICXE8EE45G ICXE8ETIG

48" Length 24" Length 18" Length 18" Adjustable Length 12" Length 6" Length Insulated Tee w/Plug * Insulated Tee cap (optional) 15° Elbow 30° Elbow 45° Elbow *Approved for Canada Only* * * * * * * * * * * 48" Length 24" Length 18" Length 18" Adjustable Length 12" Length 6" Length 15° Elbow 30° Elbow 45° Elbow 8" Tee w/plug

23 11 9 9 6 3 6 3 3 3 18 9 7 8 3 3 2 2 2

$321.90 181.00 131.00 181.00 114.40 108.80 335.30 77.70 163.20 207.60 226.50 274.20 154.30 112.20 154.30 96.60 92.20 163.20 207.60 226.50 335.30 115.50 210.90 122.10 80.00 62.20 53.30 99.90 73.30 33.30 47.80 47.80 47.80 52.20 46.70 38.90 47.80 47.80 47.80 Round Support 105.50 172.10 45.60 30.00 52.20 76.60 216.50 22.20 30.00 Length

Class "A" Chimney, Dampers and Caps

8" Tees and Elbows

8" Galvalume Components - Available Within California Only

Please see pages 101 - 105 for detailed item descriptions and installation diagrams.

Adjustable Length

8" Supports

ICXM8ERDS ICXM8ERDSI ICXM8ESS ICXM8ES ICXMESR ICXMEWS ICXMEWSE ICXMEWSR ICXMEOS ICXM8ERTA ICXM8ERTB ICXM8ERTC ICXM8ERDSE ICXM8ESSE ICXM8ECT ICXM8ECTA ICXM8ECTB ICXM8ECTC Round Support * Insulated Round Support Square Support Box * Galvanized Ceiling Support Roof Support Wall Support/Wall Band Combined Extended Wall Support (12.5" to 18.5") Wall Support (Old Style) Offset Support, 24" long Round Support Trim Ring, 1/12-4/12 Round Support Trim Ring, 4/12-8/12 Round Support Trim Ring, 8/12-12/12 Round Support Extension, 24" long Square Support Extension, 24" long Flat Chimney Trim Ring Chimney Trim Ring, 1/12-4/12 Chimney Trim Ring, 4/12-8/12 Chimney Trim Ring, 8/12-12/12 Roof Brace Adjustable Snow Wedge * Adjustable Support Stud Wall Channel Black Flue Extension Square Anchor Plate * Anchor Plate Damper Locking Band * Stainless Tek Screws (150) 16 22 15 7 6 6 4 1 1 1 15 14 1 1 1 1 18 Tee

8" Support Trims and Extensions

Elbow

8" Accessories

ICXMERB ICXMESW ICXMEAS ICXMEWC ICXM8EX ICXM8EAP ICXM8EAPD ICXM8ELB ICXMESSS

1 1 4 1

Snow Wedge

111

03/08

Associated Energy Systems, Serving you with warehouses in: Kent, WA :: West Sacramento, CA :: Denver, CO

to order call 1-800-682-9722 :: www.aes4home.com

100

8" exCel 103ht Insulated Class a ChImney (8" I.d. - 10" o.d.)

Class "A" Chimney, Dampers and Caps

IndustrIal ChImney Company

8" Firestops

Item S&F Description WT (lbs.) Retail

ICXM8ERS ICXM8EWRS ICXM8EWRSI ICXM8ERRS ICXM8ERSC ICXM8EWRSI30 ICXM8EWRSI45

* * * * *

Radiation Shield Wall Radiation Shield Insulated Wall Radiation Shield Roof Radiation Shield Cathedral Radiation Shield Angled Firestop Angled Firestop Regular Rain Cap Deluxe Rain Cap Rain Cap Base Stainless Spark Screen Universal Wind Shield Decorative Cap - Round Decorative Cap - Square Deluxe Rain Cap w/screen Regular Cap w/Screen Revolving Rain Cap (Add IC-XMERCS) if Sparkscreen is desired) Stainless Steel Weatherband Cap with Adapter Stainless Steel Weatherband Cap with Adapter

3 11 17

$63.30 117.70 210.90 61.10 109.90 168.80 168.80 82.20 128.80 22.20 21.10 48.90 175.40 196.50 149.90 92.20 210.90 141.00 150.60

Wall Radiation Shield

8" Caps

ICXM8ERC ICXM8EDRC ICXM8ERCB ICXMERCS ICXMERCW ICXM8EDCR ICXM8EDCS ICXM8EDRCSS ICXM8ERCSS ICXM8ERRC RM8WBICC RM8WDICC * * 2 2 1 1

Regular Rain Cap

* ** * *

Please see pages 101 - 105 for detailed item descriptions and installation diagrams.

Decorative Caps

8" Flashings

A storm collar is included with all ICC flashings. ICXF8EF Flat Flashing ICXF8EFA Flashing, 1/12 to 7/12 ICXF8EFB Flashing, 8/12 to 12/12 ICXF8EFC Flashing, 12/12 to 21/12 ICXF8EDCF Decorative Cap Flashing ICXF8ELFA Flexible Base Flashing, 1/12 to 7/12 ICXF8ELFB Flexible Base Flashing, 8/12 to 12/12 ICXF8EMFA Metal Roof Flashing, 1/12 to 7/12 ICXF8EMFB Metal Roof Flashing, 8/12 to 12/12 ICXF8EMFC Metal Roof Flashing, 12/12 to 21/12 ICXF8EVF Vented Flat Flashing ICXF8EVFA Vented Flashing, 1/12 to 7/12 ICXF8EVFB Vented Flashing, 8/12 to 12/12 ICXF8EVFC Vented Flashing, 12/12 to 21/12 ICXF8EFP Peak Flashing ICXF8ESF Stainless Steel Flat Flashing ICXF8ESFA Stainless Steel Flashing, 1/12 to 7/12 ICXF8ESFB Stainless Steel Flashing, 8/12 to 12/12 ICXF8ESFC * Stainless Steel Flashing, 12/12 to 21/12 ICXMESC Universal Storm Collar ICXMESSC Universal Stainless Steel Storm Collar ICXMECR Caulking Roll RM8FA Stainless Steel Flashing, 1/12-7/12 RM8FB * Stainless Steel Flashing, 8/12-12/12 6 6 6 8 93.30 93.30 97.70 123.30 58.90 321.90 321.90 124.40 127.70 153.20 133.20 133.20 137.70 162.10 123.30 145.50 145.50 149.90 195.40 24.50 37.80 5.60 92.30 112.40 Revolving Rain Cap

Flexible Base Flashing

6 6 6 6 8 8 8 8 1 2 1

Metal Roof Flashing

Peak Flashing

Storm collar is NOT included with American Hearth Products Reliance Liner flashings. Use item number RM8SC storm collar for these flashings.

112

03/08

Prices Subject to Change Without Notice

Stock & Freight: *Non-stock **Limited stock Cannot ship U.P.S. Oversize U.P.S. ¥No U.P.S. Freight Program

to order call 1-800-682-9722 :: www.aes4home.com

IndustrIal ChImney Company

resIdentIal Insulated staCk (r.I.s.)

Residential Insulated Stack (R.I.S.) may be used to extend a masonry chimney which has been lined with an approved chimney liner. This type of repair is generally found where the original flue tile has been damaged by chimney fire or moisture and, in cases, where the flue has been relined to reduce its cross section. R.I.S. may also be used as a chimney for masonry fireplaces. R.I.S. chimneys have been specifically designed, tested and listed to vent masonry fireplaces in residential installations and to extend existing masonry chimneys. One of the primary applications of R.I.S. is for the repair of earthquake damaged masonry fireplaces and chimneys. ICC provides components designed to correctly adapt its products to existing masonry construction and warrants the performance and mechanical integrity of its system when it is correctly installed on a structurally sound foundation. The R.I.S. anchor plate has a single wall connector section designed to allow a metal chimney liner to be screwed directly to it. Refer to the Excel 103HT brochure at the end of this section for chimney sizing tables and recommendations on flue height. The requirements for chimney repair vary substantially from jurisdiction to jurisdiction. We strongly recommend that you contact your local building officials to determine the requirements in your particular area before attempting any chimney repairs. Some municipalities have specific written repair requirements; most other areas are not as specific. Two sources of information concerning the construction and inspection of masonry chimneys and fireplaces are "The Residential Fireplace and Chimney Handbook" written by the Masonry Institute of America and "Repair of Earthquake Damaged Masonry Chimneys Using New Metal Chimneys" by the City of Los Angeles Departments of Building and Safety.

100

Class "A" Chimney, Dampers and Caps

Typical Site-Built Transition

Typical Fireplace Installation

Typical Masonry Chimney Extension

113

Associated Energy Systems, Serving you with warehouses in: Kent, WA :: West Sacramento, CA :: Denver, CO

03/08

to order call 1-800-682-9722 :: www.aes4home.com

100

IndustrIal ChImney Company

resIdentIal Insulated staCk (r.I.s.)

10" 120' 120' 97' 40' 40' 53' 120'

Hole Size (in)

Class "A" Chimney, Dampers and Caps

Diameter R.I.S. Vertical Capacity Table Anchor Plate Floor Support Wall Support Offset Support Roof Support Insulated Tee Chimney Length R.I.S. Minimum Rough Opening Dimensions Combustible Wall, Floor, or Roof Non-Combustible Wall, Floor, or Roof R.I.S. Chimney Dimensions Approx Lbs./Ft. Outer Diameter

12" 102' 102' 82' 35' 35' 45' 102' 18 15 7 14-1/4"

14" 89' 89' 72' 30' 30' 39' 89' 20 17 8 16-1/4"

16" 78' 78' 63' 25' 25' 35' 78' 22 19 9 18-1/4"

18" 70' 70' 57' 20' 20' 31' 70' 24 21 13 20-1/4"

20" 64' 64' 51' 20' 20' 28' 64' 26 23 14 22-1/4"

22" 58' 58' 47' 20' 20' 26' 58' 28 25 16 24-1/4"

24" 53' 53' 43' 20' 20' 23' 53' 30 27 17 26-1/4"

16 13 6 12-1/4"

R.I.S. Nominal to Installed Flue Length Nominal Length Installed Length 48" 46-1/4" 24" 22-1/4" 24" adj. 13-1/2" to 22-1/4" 12" 10-1/4" 12" adj. 7-1/2" to 10-1/4"

R.I.S. 15° Elbow Dimensions I.D. 10" 12" 14" 16" 18" 20" 22" 24" A 6-7/8" 7-3/8" 7-7/8" 8-3/8" 8-7/8" 9-3/8" 9-7/8" 10-3/8" B 3/4" 7/8" 7/8" 1" 1" 1-1/8" 1-1/8" 1-1/4"

R.I.S. 30° Elbow Dimensions I.D. 10" 12" 14" 16" 18" 20" 22" 24" A 8-1/2" 9" 9-1/2" 10" 10-1/2" 11" 11-1/2" 12" B 1-7/8" 2" 2-1/8" 2-1/4" 2-1/2" 2-5/8" 2-3/4" 2-7/8"

R.I.S. 45° Elbow Dimensions I.D. 10" 12" 14" 16" 18" 20" 22" 24" A 9-3/8" 10" 10-3/4" 11-1/2" 12-1/4" 12-7/8" 13-1/2" 14-1/4" B 1-7/8" 2" 2-1/8" 2-1/4" 2-1/2" 2-5/8" 2-3/4" 2-7/8"

114

03/08

Prices Subject to Change Without Notice

Stock & Freight: *Non-stock **Limited stock Cannot ship U.P.S. Oversize U.P.S. ¥No U.P.S. Freight Program

to order call 1-800-682-9722 :: www.aes4home.com

resIdentIal Insulated staCk (r.I.s.) l arge dIameter ChImney

Offset Table Reference RIS Offset Table 10" to 16" All measurements are in inches. Class "A" Chimney, Dampers and Caps

2 X 45° Offset Rise 6.58 14.18 22.66 39.63 47.23 55.72 63.32 72.69 7.11 14.71 23.19 40.16 47.77 56.25 63.85 73.22 7.81 15.41 23.90 40.87 48.47 56.96 64.56 73.93 8.34 15.95 24.43 41.40 49.00 57.49 65.09 74.46 15.88 23.48 31.96 48.93 56.53 65.02 72.62 81.99 17.16 24.76 33.24 50.21 57.82 66.30 73.90 83.27 18.86 26.46 34.95 51.92 59.52 68.01 75.61 84.98 20.14 27.75 36.23 53.20 60.80 69.29 86.89 86.26

IndustrIal ChImney Company

100

2 X 15° Diameter Length Between Elbows No Length 12" Length 24" Length 48" Length 48" + 12" 48" + 24" 48" + 24" + 12" 48" + 48" No Length 12" Length 24" Length 48" Length 48" + 12" 48" + 24" 48" + 24" + 12" 48" + 48" No Length 12" Length 24" Length 48" Length 48" + 12" 48" + 24" 48" + 24" + 12" 48" + 48" No Length 12" Length 24" Length 48" Length 48" + 12" 48" + 24" 48" + 24" + 12" 48" + 48" Offset Rise 1.57 4.35 7.45 13.67 16.45 19.55 22.34 25.77 1.57 4.35 7.45 13.67 16.45 19.55 22.34 25.77 1.70 4.48 7.58 13.80 16.58 19.68 22.47 25.89 1.70 4.48 7.58 13.80 16.58 19.68 22.47 25.89 11.89 22.28 33.87 57.05 67.43 79.03 89.41 102.21 11.89 22.28 33.87 57.05 67.43 79.03 89.41 102.21 12.88 23.26 34.85 58.03 68.42 80.01 90.39 103.19 12.88 23.26 34.85 58.03 68.42 80.01 90.39 103.19

2 X 30° Offset Rise 3.77 9.15 15.15 27.15 32.52 38.52 43.90 50.52 4.02 9.40 15.40 27.40 32.77 38.77 44.15 50.77 4.27 9.65 15.65 27.65 33.02 39.02 44.40 51.02 4.52 9.90 15.90 27.90 33.27 39.27 44.65 51.27 14.09 23.40 33.79 54.58 63.88 74.28 83.59 95.06 15.02 24.33 34.72 55.51 64.82 75.21 84.52 95.99 15.95 25.26 35.66 56.44 65.75 76.14 85.45 96.93 16.89 26.20 36.59 57.37 66.68 77.08 86.39 97.86

10"

12"

14"

16"

115

Associated Energy Systems, Serving you with warehouses in: Kent, WA :: West Sacramento, CA :: Denver, CO

03/08

to order call 1-800-682-9722 :: www.aes4home.com

100

IndustrIal ChImney Company resIdentIal Insulated staCk (r.I.s.) l arge dIameter ChImney

Offset Table Reference RIS Offset Table 18" to 24" All measurements are in inches.

Class "A" Chimney, Dampers and Caps

2 X 15° Diameter Length Between Elbows No Length 12" Length 24" Length 48" Length 48" + 12" 48" + 24" 48" + 24" + 12" 48" + 48" No Length 12" Length 24" Length 48" Length 48" + 12" 48" + 24" 48" + 24" + 12" 48" + 48" No Length 12" Length 24" Length 48" Length 48" + 12" 48" + 24" 48" + 24" + 12" 48" + 48" No Length 12" Length 24" Length 48" Length 48" + 12" 48" + 24" 48" + 24" + 12" 48" + 48" Offset Rise 1.82 4.61 7.71 13.92 16.71 19.81 22.59 26.02 1.82 4.61 7.71 13.92 16.71 19.81 22.59 26.02 1.95 4.74 7.84 14.05 16.84 19.94 22.72 26.15 1.95 4.74 7.84 14.05 16.84 19.94 22.72 26.15 13.86 24.24 35.83 59.02 69.40 80.99 91.38 104.17 13.86 24.24 35.83 59.02 69.40 80.99 91.38 104.17 14.84 25.23 36.82 60.00 70.38 81.97 92.36 105.16 14.84 25.23 36.82 60.00 70.38 81.97 92.36 105.16

2 X 30° Offset Rise 4.77 10.15 16.15 28.15 33.52 39.52 44.90 51.52 5.15 10.52 16.52 28.52 33.90 39.90 45.27 51.90 5.40 10.77 16.77 26.77 34.15 40.15 45.52 52.15 5.65 11.02 17.02 29.02 34.40 40.40 45.77 52.40 17.82 27.13 37.52 58.31 67.62 78.01 87.32 98.79 19.22 28.53 38.92 59.71 69.02 79.41 88.72 100.19 20.15 29.46 39.86 60.64 69.95 80.34 89.65 101.13 21.09 30.40 40.79 61.57 70.88 81.27 90.58 102.00

2 X 45° Offset Rise 8.87 16.48 24.96 41.93 49.53 58.02 65.62 74.99 9.58 17.18 25.67 42.64 50.27 58.73 66.33 75.70 9.93 17.54 26.02 42.99 50.99 59.08 66.68 76.05 10.64 18.24 26.73 43.70 51.30 59.79 67.39 76.76 21.42 29.03 37.51 54.48 62.08 70.57 78.17 87.54 23.13 30.73 39.22 56.19 63.79 72.28 79.88 89.25 23.98 31.59 40.07 57.04 64.64 73.13 80.73 90.10 25.69 33.29 41.78 58.75 66.35 74.84 82.44 91.81

18"

20"

22"

24"

116

03/08

Prices Subject to Change Without Notice

Stock & Freight: *Non-stock **Limited stock Cannot ship U.P.S. Oversize U.P.S. ¥No U.P.S. Freight Program

to order call 1-800-682-9722 :: www.aes4home.com

resIdentIal Insulated staCk (r.I.s.) l arge dIameter ChImney 10"-24"

Designed, tested and listed to vent large wood burning fireplaces and to extend masonry chimneys. Stock status may vary between AES warehouse locations. To confirm stock status, log into "Partners" on our website, or call AES Customer Service 1-800-682-9722.

To order, enter the appropriate chimney diameter size into the item number.

IndustrIal ChImney Company

100

Class "A" Chimney, Dampers and Caps

R.I.S. Chimney Lengths - all Stainless Steel

Item No. Description

10" 216.50 182.10 135.50 302.00 189.90 454.00 236.50 88.60 302.00 56.70 26.70 296.40 191.00 164.30 124.40 267.60 174.30 425.20 212.10 259.80 273.10 18.90 148.80 179.90 35.60 367.50 88.80 409.60 103.30 195.40 76.60 97.70 32.20 73.30 74.40 35.60

12" 246.50 206.50 154.30 345.30 216.50 576.10 293.10 329.70 346.40 127.70 27.80 337.50 216.50 185.40 139.90 302.00 196.50 507.30 263.10 296.40 312.00 20.00 153.20 193.20 46.70 374.10 151.00 451.80 151.00 205.40 145.50 107.70 42.20 83.80 78.90 45.60

14" 268.70 224.30 166.50 376.30 233.10 651.60 315.30 358.60 361.90 143.20 32.30 373.00 236.50 201.00 151.00 330.80 212.10 562.80 284.20 324.20 325.30 21.10 155.40 218.70 63.30 381.90 203.20 522.90 156.60 273.10 205.40 114.40 58.90 99.90 88.80 53.30

16" 319.70 264.20 195.40 446.30 273.10 321.90 368.60 396.30 159.90 36.70 413.00 258.70 218.70 165.40 361.90 232.00 626.10 289.80 331.90 356.40 24.50 176.50 238.70 78.90 439.60 224.30 578.40 164.30 340.80 228.70 125.50 74.40 115.50 98.80 66.60

18" 387.40 316.40 233.10 542.80 326.40 348.60 398.50 435.20 179.90 41.10 518.40 315.30 263.10 197.60 440.70 277.50 847.00 314.20 358.60 391.90 26.70 199.80 267.60 90.00 501.80 253.10 656.10 165.40 408.50 258.70 137.70 87.70 128.80 108.80 74.40

20" 430.70 353.00 262.00 603.90 366.30 383.00 442.90 496.20 243.10 45.60 578.40 351.90 294.20 222.00 492.90 310.80 345.30 398.50 446.30 30.00 226.50 290.90 148.80 570.60 290.90 720.40 192.10 476.20 321.90 145.50 135.50 176.50 118.80 108.80

22" 474.00 391.90 283.10 662.70 396.30 429.60 495.10 539.50 273.10 47.80 641.60 378.40 321.90 239.80 542.80 336.40 387.40 445.20 486.20 32.20 253.10 320.80 153.20 641.60 314.20 805.90 208.70 543.90 350.80 162.10 139.90 181.00 129.90 115.50

24" 507.30 414.10 302.00 710.40 424.10 465.10 518.40 570.60 304.20 52.20 687.10 414.10 345.30 255.30 579.50 357.50 418.50 466.20 514.00 35.60 280.90 346.40 155.40 718.20 339.70 879.20 228.70 615.00 380.80 176.50 143.20 184.30 139.90 125.50

ICRC__RIL4 ICRC__RIL2 ICRC__RIL18 ICRC__RIL1 ICRC__RILA2 ICRC__RILA1 ICRE__RIT ICRE__RIE15 ICRE__RIE30 ICRE__RIE45 ICRE__RITC ICRM__RSLB ICRC__RIL4G ICRC__RIL2G ICRC__RIL18G ICRC__RIL1G ICRC__RILA2G ICRC__RILA1G ICRE__RITG ICRE__RIE15G ICRE__RIE30G ICRE__RIE45G ICRM__RGLB ICRM__RBSG ICRM__RWSG ICRM__RWBG

48" Length 24" Length 18" Length 12" Length 24" Adj. Length 12"Adj. Length Regular Tee 15° Elbow 30° Elbow 45° Elbow Regular Tee Cap Locking Band 48" Length 24" Length 18" Length 12" Length 24" Adj. Length 12" Adj. Length Regular Tee 15° Elbow 30° Elbow 45° Elbow Locking Band Base Support Wall Support Wall Band Base Support Roof Support Wall Support Anchor Plate Anchor Plate with Damper Offset Support Wall Band Guy Band Roof Brace Radiation Shield Firestop

$346.40 $396.30 $436.30 $534.00 $661.60 $736.00 $813.70 $874.70

738.20 1039.00 1185.50 1348.70 1514.10

Galvalume Items with Stainless Steel Lining

955.80 1075.60 1196.60

Supports

ICRM__RBS ICRM__RSR ICRM__RWS ICRM__RAP ICRM__RAPD ICRM__ROS ICRM__RWB ICRM__RGB ICRM__RRB ICRM__RRS ICRM__RFS

117

Associated Energy Systems, Serving you with warehouses in: Kent, WA :: West Sacramento, CA :: Denver, CO

03/08

to order call 1-800-682-9722 :: www.aes4home.com

100

resIdentIal Insulated staCk (r.I.s.) l arge dIameter ChImney 10"-24"...ContInued

Class "A" Chimney, Dampers and Caps Designed, tested and listed to vent large wood burning fireplaces and to extend masonry chimneys. Stock status may vary between AES warehouse locations. To confirm stock status, log into "Partners" on our website, or call AES Customer Service 1-800-682-9722.

To order, enter the appropriate chimney diameter size into the item number.

IndustrIal ChImney Company

Flashings With Storm Collars

Item No. Description

10" 128.80 151.00 26.70 41.10

12" 146.60 172.10 31.10 47.80

14" 166.50 196.50 37.80 67.80

16" 176.50 207.60 45.60 76.60

18" 213.20 249.80 51.10 87.70

20" 270.90 317.50 61.10 104.40

22" 280.90 330.80 72.70 113.30

24" 285.30 336.40 84.40 129.90

ICRF__RF ICRF__RFA ICRF__RFB ICRM__RSC ICRM__RSCSS ICRM__RRC ICRM__RRCB ICRM__REX

Flat Flashing 1-7/12 Flashing 8-12/12 Flashing Storm Collar S/S Storm Collar

$112.20 $127.70 $145.50 $154.30 $185.40 $236.50 $244.20 $248.70

Caps and Accessories

Rain Cap Rain Cap Base

166.50 83.30 26.70 71.10 193.20 185.40 92.20 31.10 82.20 216.50 223.20 112.20 37.80 94.40 262.00 257.60 128.80 43.30 107.70 300.90 296.40 148.80 51.10 122.10 347.50 365.20 182.10 58.90 138.80 424.10 397.40 199.80 68.90 155.40 466.20 417.40 208.70 82.20 174.30 498.40

ICRM__RRCFS Rain Cap Firescreen

Flue Extension

ICRM__RRCSS Rain Cap w/screen

118

03/08

Prices Subject to Change Without Notice

Stock & Freight: *Non-stock **Limited stock Cannot ship U.P.S. Oversize U.P.S. ¥No U.P.S. Freight Program

to order call 1-800-682-9722 :: www.aes4home.com

ultrablaCk Fs double wall blaCk stovepIpe

Ultrablack FS (fully shielded) double wall black stovepipe requires just 6" clearance to combustible materials in all diameters-even when installed in a corner or parallel with a ceiling (Check manufacturer's clearance requirements).

Ultrablack has a smooth, clean appearance to complement any stove installation and maximize flue gas temperatures, insuring good draft when used with catalytic stoves. It's constructed of type 304 Ultra matte stainless steel, a specially designed stainless steel that is more attractive and scratch resistant when painted. Ultrablack is painted with Forrest Paint "Stove Bright" Flat Black premium quality high temperature stove paint. Parts are shipped wrapped in heavy paper or plastic to insure an attractive, scratch free finish. Ultrablack assembles like a regular single wall stove pipe without complicated, unsightly twist lock connectors or spot welds, and no cutting required for installation. It easily fits most stoves, including cast iron stoves and those with oval collars and comes complete with black oxide screws and pre-drilled holes to insure safe, easy installation. Ultrablack is approved for most mobile home installations on most major stove brands when installed with Excel 103HT insulated chimney and is covered by a no-hassle, Lifetime Warranty. Class "A" Chimney, Dampers and Caps

IndustrIal ChImney Company

100

6" Chimney Lengths

Item No. S&F Description WT (lbs) Retail

ICUC6UBAF ICUC6UB3F ICUC6UB2F ICUC6UB18F ICUC6UB1F ICUC6UB5F ICUC6UB6SF ICUC6UB1SF ICUC6UB18SF

Adjustable Length, 40" to 68", with trim collar 36" Length 24" Length 18" Length 12" Length 5" Length 6" Slip Section 12" Slip Section * 18" Slip Section Tee with plug and trim collar * 30° Elbow 45° Elbow 90° Elbow 15° Elbow Masonry Adapter Stove Adapter Damper Section Trim Collar, covers crimped edge * Increaser 5" - 6" Increaser 6" - 7" Increaser 6" - 8" Increaser 7" - 8" Reducer 8" - 7" Reducer 8" - 6" Reducer 7" - 6 * Long Black Screws (100) * Short Black Screws (100)

18 9 10 4 3 2 3 5 5 3 4 4

$185.40 103.30 80.00 72.20 64.40 37.80 48.90 70.00 75.50 90.00 56.70 56.70 80.00 55.50 57.80 17.00 70.00 12.30 77.70 77.70 77.70 77.70 77.70 77.70 77.70 22.20 13.40

6" Tees and Elbows

ICUE6UBT ICUE6UB30 ICUE6UB45 ICUE6UB90 ICUE6UB15

6" Adapters

ICUM6UBM ICUM6UBSE ICUM6UBD ICUM6UBTC ICUMUBI56 ICUMUBI67 ICUMUBI68 ICUMUBI78 ICUMUBR87 ICUMUBR86 ICUMUBR76 ICUMLBS ICUMSBS 4 1 1 2 2

2 2

119

Associated Energy Systems, Serving you with warehouses in: Kent, WA :: West Sacramento, CA :: Denver, CO

03/08

to order call 1-800-682-9722 :: www.aes4home.com

100

7" & 8" ultrablaCk Fs double wall blaCk stovepIpe (7" I.D. - 7 3/8" O.D.)

Class "A" Chimney, Dampers and Caps

IndustrIal ChImney Company

7" Chimney Lengths

Item No. Description WT (lbs.) Retail

ICUC7UBAF ICUC7UB3F ICUC7UB2F ICUC7UB18F ICUC7UB1F ICUC7UB5F ICUC7UB6SF ICUC7UB1SF ICUC7UB18SF

Adjustable Length, 40" to 68", with trim collar 36" Length 24" Length 18" Length 12" Length * 5" Length 6" Slip Section 12" Slip Section * 18" Slip Section Tee with plug and trim collar * 30° Elbow 45° Elbow 90° Elbow Masonry Adapter Stove Adapter Damper Section Trim Collar, covers crimped edge

18 9 10 4 3 2 3 5 5 3 4 4 4 1 1

$213.20 111.00 95.50 85.50 76.60 44.40 56.70 82.20 90.00 105.50 62.20 63.30 90.00 62.20 18.90 80.00 14.50

7" Tees and Elbows

ICUE7UBT ICUE7UB30 ICUE7UB45 ICUE7UB90

7" Adapters

ICUM7UBM ICUM7UBSE ICUM7UBD ICUM7UBTC

(8" I.D. - 8 3/8" O.D.)

8" Chimney Lengths

Item No. Description WT (lbs) Retail

ICUC8UBAF ICUC8UB3F ICUC8UB2F ICUC8UB18F ICUC8UB1F ICUC8UB5F ICUC8UB6SF ICUC8UB1SF ICUC8UB18SF ICUC8UBORF

Adjustable Length, 40" to 68", with trim collar 36" Length 24" Length 18" Length 12" Length * 5" Length 6" Slip Section 12" Slip Section * 18" Slip Section Oval to Round Adapter Tee with plug and trim collar * 30° Elbow 45° Elbow 90° Elbow Masonry Adapter Stove Adapter Damper Section Trim Collar, covers crimped edge

18 9 10 4 3 2 2 3 5

$232.00 122.10 105.50 101.10 93.30 48.90 67.80 98.80 104.40 86.60 124.40 73.30 76.60 106.60 64.40 20.00 91.10 16.00

8" Tees and Elbows

ICUE8UBT ICUE8UB30 ICUE8UB45 ICUE8UB90 5 3 4 4 4 1 1

8" Adapters

ICUM8UBM ICUM8UBSE ICUM8UBD ICUM8UBTC

120

03/08

Prices Subject to Change Without Notice

Stock & Freight: *Non-stock **Limited stock Cannot ship U.P.S. Oversize U.P.S. ¥No U.P.S. Freight Program

to order call 1-800-682-9722 :: www.aes4home.com

duraplus 2100° F ChImney system

DuraPlus - The innovative triple-wall chimney system from Simpson Dura-Vent, offering superior performance and ease of installation. DuraPlus is the leader in triple-wall chimney for wood, oil, gas and coal-fired appliances. DuraPlus Chimney features a patented firesafe design and: Class "A" Chimney, Dampers and Caps

sImpson dura-vent

100

· · · · · · ·

Chimney components for every conceivable installation requirement Twist-lock pipe and fittings for ease of installation Lightweight for easy handling .016" 430 stainless steel inner liner Galvanized steel outer wall (or optional stainless steel) U.L. listed to 103 HT Standard 25-year warranty

The DuraPlus 2100° F Chimney System, offered in 6", 7"*, and 8" sizes, is designed for use with gravity appliances that have been tested and listed for use with a 2100° HT chimney system, including wood stoves, fireplaces, oil, gas and coal fired appliances. Allow a minimum of 2" airspace clearance to combustibles. A DuraPlus chimney STAYS COOL ON THE OUTSIDE at all times to protect the building during normal stove operation. It STAYS HOT ON THE INSIDE to discourage the deposit of creosote, while providing the correct draft for stove performance. Two layers of insulation (ceramic blanket plus air space) keep the DuraPlus cool outside to protect the building, and hot inside to boost stove efficiency during normal stove operation. If a red hot creosote fire does erupt, the patented DuraPlus FIRESAFE DESIGN serves to protect both the chimney and the building. DuraPlus liner is designed to not warp or buckle. Special end ring suspension at each joint flexes to allow the inner liner to expand lengthwise when hot. In addition, ceramic insulating blanket is flexible and compressible, so the liner can expand outward when hot. Chimney Lengths DuraPlus chimney pipe in 6", 9" and 12" lengths have a 1" insulating blanket. The 24" and 36" lengths have a 1/2" blanket. To calculate the installed length of Dura/Plus or DuraChimney pipe lengths, subtract 1-1/2" from each length of chimney pipe. Elbows Use elbows to offset obstructions such as rafters, ridgepoles or joists. 6", 7" and 8" diameters may have two pairs of elbows, if needed. Larger diameters are restricted to one pair of offsets. Offsets greater than 30° are not allowed. Elbows are not adjustable. Dura/ Plus elbows have a 1" insulating blanket. Tee with Cap The tee can be used to start chimneys indoors (inside a chase) or outdoors. The tee cleanout cap is removable for easy chimney cleaning or inspection. Wall straps, a wall thimble, and a tee support must be installed with the tee as directed. Dura/Plus tees have 1" insulating blanket. Ventilation for chimney must be drawn from outdoors. Tee Support Bracket Use to support the tee, the tee bracket is suspended from a wall. Safety shelf protects against creosote leaks. Supports up to 35' of DuraPlus Chimney or 50' of DCR Chimney. Wall Thimble The wall thimble adjusts from 4 3/4" to 7 3/4" and fits between standard wall studs. The telescoping pieces can be separated and an extension installed to accommodate thicker walls. The interior trim ring is painted black. The wall thimble must be installed with an appropriate length of chimney pipe through the wall horizontally. Square Ceiling Support Box and Trim Collar Square locking ceiling support boxes are painted black. A 1 1/2" wide trim collar is included with all square support boxes. Supports up to 35' of DuraPlus Chimney or 50' of DCR or DC Chimney. Tee with Cap

Length

15° Elbow

30° Elbow

Tee Support Bracket

121

02/08

Associated Energy Systems, Serving you with warehouses in: Kent, WA :: West Sacramento, CA :: Denver, CO

to order call 1-800-682-9722 :: www.aes4home.com

100

dura/plus 2100° F ChImney system

Class "A" Chimney, Dampers and Caps

sImpson dura-vent

Round Ceiling Support Box

Round locking support boxes are painted black. 1 1/2" trim is included. Supports up to 35' of Dura/Plus Chimney or 50' of DCR Chimney. Flat Ceiling Support Box Flat ceiling support boxes are not painted. Can be painted with high temperature paint. They are designed for installation in flat ceilings only. One-inch wide trim is attached. Supports up to 35' of Dura/Plus Chimney or 50' of DCR or DC Chimney.

Wall Thimble

Firestop Radiation Shield

Install where a chimney passes through a floor or ceiling without a support box. Centers pipe and provides proper clearance. Close Clearance Shield Used when chimney passes through the roof opening with less than the normal 2" minimum clearance to roof trusses or rafters. Pipe must be centered within close clearance shield. Attic Insulation Shield Attic insulation shields consist of two parts: collar and base. This universal attic insulation shield must be used in all installations that pass through an attic to prevent insulation and debris from accumulating near the chimney. Roof Flashings Select the proper flashing based on the pitch of the roof. Note: a 6/12 pitch has a vertical rise of 6 inches over a horizontal distance of 12 inches. Steep roof flashings are available to accommodate pitches up to 24/12. Chimney Caps Chimney caps are made from stainless steel and include spark arrestor screens. Storm Collars The storm collar slips around the pipe just above the flashing. Seal the inner edge to the chimney with a non-hardening 500° high temperature sealant. Extended Roof Bracket Use to support the chimney when it extends more than 4 feet above the roof. Install with 3/4" thin-wall galvanized electrical conduit. Conduit not included. Wall Strap For use in interior or exterior installations to support and stabilize the chimney while assuring a 2" clearance. Wall straps are required every four feet on exterior of building only. Snap-Lock Adapter Snaps into the ceiling support box and extends down to fit inside most stovepipe for a drip-free connection to a Dura/Plus Chimney system. Painted black. Not a U.L. listed product. Elbow Strap Elbow straps are required between two elbows to support the weight of the chimney. Base Plate Zero clearance fireplace adapter. The base plate is to be used on a zero-clearance fireplace when using Dura/Plus directly off the unit. Masonry Anchor Plate Provides a base for beginning the installation on the top of a masonry fireplace. Factory built chimney's low weight reduces footing requirements and ensures fastest installation time. Transition Anchor Plate Provides easy installation of Duraliner and DuraPlus combinations, as well as DuraPlus installation on masonry fireplaces and chimneys.

Prices Subject to Change Without Notice

Square Ceiling Support Box

Round Ceiling Support Box

Flat Ceiling Support Box

Firestop Radiation Shield

Attic Insulation Shield

122

02/08

Flat Roof Flashing

Stock & Freight: *Non-stock **Limited stock Cannot ship U.P.S. Oversize U.P.S. ¥No U.P.S. Freight Program

to order call 1-800-682-9722 :: www.aes4home.com

6" duraplus 2100° F ChImney system (6" I.d. - 10" o.d.)

6" Chimney Lengths

To calculate the installed length of DuraPlus or Dura-Chimney pipe lengths, subtract 1-1/2" from each length of chimney pipe.

Item No. S&F Description Pkg. Wt./Cs. (lbs.) Retail

sImpson dura-vent

100

Class "A" Chimney, Dampers and Caps

SD9006 SD9014 SD9019 SD9017SS SD9017 SD9021 SD9021SS SD9064KIT SD9064SSKIT SD9066KIT SD9066SSKIT SD9067SS SD9067

¥ ¥ ¥

6" Chimney Section 12" Chimney Section 9" Chimney Section 36" Stainless Chimney Section 36" Chimney Section 24" Chimney Section 24" Stainless Chimney Section

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 set 1 set 1 set 1 1 1 1 1 1 10 1 1 2 1 2 2 1

4 7 6 16 18 12 11 5 5 12 6 10 10

$53.33 71.60 62.74 160.08 149.53 105.67 123.54 250.98 346.68 333.81 462.55 226.50 202.79

Length

6" Tees and Elbows

15° Elbow Kit: 2 Elbows & 1 Elbow Strap * 15° Stainless Elbow Kit: 2 Elbows & 1 Elbow Strap 30° Elbow Kit: 2 Elbows & 1 Elbow Strap * 30° Stainless Elbow Kit: 2 Elbows & 1 Elbow Strap * Stainless Tee with Cap Tee with Cap Round Ceiling Support Cover Flat Ceiling Support (Unfinished) 11" Support Box w/Trim Collar 24" Support Box w/Trim Collar 36" Support Box w/Trim Collar Tee Support Bracket * Stainless Tee Support Bracket Wall Thimble Stainless Wall Thimble Firestop Radiation Shield 6"-8" Attic Insulation Shield Close Clearance Shield, 3' Close Clearance Shield, 4' Close Clearance Shield, 5' Adj. Flashing 0/12-6/12 Ventilated Adj. Flashing 7/12-12/12 Ventilated Flat Roof Flashing (Tall Cone) Ventilated Adj. Flashing 19/12-24/12 Ventilated Adj. Flashing 13/12-18/12 Ventilated Chimney Cap with Spark Arrestor 6"-8" Storm Collar 15° Elbow

6" Supports

SD9045N SD9047N SD9048AN SD9048BN SD9048DN SD9072 SD9072SS 9 74.89 6 51.23 10 80.64 14 90.35 19 134.89 9 85.04 9 166.84 8 7 7 9 13 19 21 65.10 84.75 54.53 70.38 67.50 77.23 97.47 30° Elbow

6" Firestop

SD9043N SD9043SS SD9044 SD9946 SD9980A SD9980B SD9980C SD9049V SD9050V SD9051V SD9052V SD9081V SD9084 SD9959 * Tee with Cap

* * * * *

6" Caps and Flashings

4 55.66 8 93.96 7 60.24 14 214.48 14 138.91 5 72.22 10 11.94 3 46.28 3 43.01 5 31.39 3 99.42 4 26.27 4 32.73 4 150.38

Tee Support Bracket

Dura-Vent Qualifies For FREE FREIGHT See pg. J.

6" Accessories

SD1468 SD9001 SD9060 SD9061 SD9068 SD9068SS SD9011 * Chase Air Intake w/Rodent Guard * Base Plate Elbow Strap Extended Roof Bracket Wall Strap * Stainless Wall Strap * Starter Section

123

02/08

Associated Energy Systems, Serving you with warehouses in: Kent, WA :: West Sacramento, CA :: Denver, CO

to order call 1-800-682-9722 :: www.aes4home.com

100

7" duraplus 2100° F ChImney system (7" I.d. - 11" o.d.)

Class "A" Chimney, Dampers and Caps

sImpson dura-vent

7" Chimney Lengths

To calculate the installed length of DuraPlus or Dura-Chimney pipe lengths, subtract 1-1/2" from each length of chimney pipe.

Item No. S&F Description Pkg. Wt./Cs. (lbs.) Retail

SD9106 SD9114 SD9119 SD9117SS SD9117 SD9121 SD9121SS SD9164KIT SD9164SSKIT SD9166KIT SD9166SSKIT SD9167 SD9167SS

* * * *¥ *¥ * * * * * * * * * * * * * * *

6" Chimney Section 12" Chimney Section 9" Chimney Section 36" Stainless Chimney Section 36" Chimney Section 24" Chimney Section 24" Stainless Chimney Section 15° Elbow Kit: 2 Elbows & 1 Elbow Strap 30° Elbow Kit: 2 Elbows & 1 Elbow Strap Tee with Cap Stainless Tee with Cap Round Ceiling Support Cover with Trim Collar Flat Ceiling Support (Unfinished) 11" Support Box w/Trim Collar 24" Support Box w/Trim Collar 36" Support Box w/Trim Collar Tee Support Bracket Stainless Tee Support Bracket

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 set 1 set 1 set 1 1 1 1 1 1 10 1 1 2 1 Set 2 2

4 7 6 18 18 12 11 6 6 6 6 14 12 9 6 10 14 19 10 9 8 8 8 9 13 19 21 4 9 6 6 14 5 10 3 3 4 3 4 3

$66.26 90.95 76.33 200.32 178.29 134.74 164.75 304.52 420.74 387.35 530.92 248.40 272.98 78.28 59.47 87.86 96.23 150.16 96.08 166.84 78.61 93.90 64.98 70.38 67.50 77.23 97.47 62.59 108.66 65.56 236.23 159.51 96.53 11.94 46.28 48.29 31.74 56.96 28.58 35.26

Length

7" Tees and Elbows

15° Stainless Elbow Kit: 2 Elbows & 1 Elbow Strap 1 30° Stainless Elbow Kit: 2 Elbows & 1 Elbow Strap 1

15° Elbow

7" Supports

SD9145N SD9147N SD9148AN SD9148BN SD9148DN SD9172 SD9172SS

30° Elbow

7" Firestop

SD9143N SD9143SS SD9144 SD9946 SD9980A SD9980B SD9980C SD9149V SD9150V SD9151V SD9152V SD9181V SD9184 SD9959 * Wall Thimble * Stainless Wall Thimble * Firestop Radiation Shield 6"-8" Attic Insulation Shield * Close Clearance Shield, 3' * Close Clearance Shield, 4' * Close Clearance Shield, 5' * * * * * * Adj. Flashing 0/12-6/12 Ventilated Adj. Flashing 7/12-12/12 Ventilated Flat Roof Flashing (Tall Cone) Ventilated Adj. Flashing 19/12-24/12 Ventilated Adj. Flashing 13/12-18/12 Ventilated Chimney Cap 6"-8" Storm Collar Chase Air Intake w/Rodent Guard Base Plate Elbow Strap Extended Roof Bracket Wall Strap Stainless Wall Strap

Tee with Cap

7" Caps and Flashings

7" Accessories

SD1468 SD9101 SD9160 SD9162 SD9168 SD9168SS * * * * * *

Tee Support Bracket

124

02/08

Prices Subject to Change Without Notice

Stock & Freight: *Non-stock **Limited stock Cannot ship U.P.S. Oversize U.P.S. ¥No U.P.S. Freight Program

to order call 1-800-682-9722 :: www.aes4home.com

8" duraplus 2100° F ChImney system (8" I.d. - 12" o.d.)

8" Chimney Lengths

To calculate the installed length of DuraPlus or Dura-Chimney pipe lengths, subtract 1-1/2" from each length of chimney pipe.

Item No. S&F Description Pkg. Wt./Cs. (lbs.) Retail

sImpson dura-vent

100

Class "A" Chimney, Dampers and Caps Chimney Cap

SD9206 SD9214 SD9217SS SD9217 SD9219 SD9221 SD9221SS SD9264KIT SD9264SSKIT SD9266KIT SD9266SSKIT SD9267 SD9267SS

* 6" Chimney Section 12" Chimney Section *¥ 36" Stainless Chimney Section ¥ 36" Chimney Section * 9" Chimney Section 24" Chimney Section * 24" Stainless Chimney Section 15° Elbow Kit: 2 Elbows & 1 Elbow Strap * 15° Stainless Elbow Kit: 2 Elbows & 1 Elbow Strap 30° Elbow Kit: 2 Elbows & 1 Elbow Strap * 30° Stainless Elbow Kit: 2 Elbows & 1 Elbow Strap * Tee with Cap * Stainless Tee with Cap * Round Ceiling Support Box * Flat Ceiling Support Box (Unfinished) 11" Square Ceiling Support Box w/Trim Collar * 24" Square Ceiling Support Box w/Trim Collar 36" Square Ceiling Support Box w/Trim Collar * Tee Support Bracket * Stainless Tee Support Bracket Wall Thimble * Stainless Wall Thimble Firestop Radiation Shield 6"-8" Attic Insulation Shield * Close Clearance Shield, 3' * Close Clearance Shield, 4' * Close Clearance Shield, 5' * * * Adj. Flashing 0/12-6/12 Ventilated Adj. Flashing 45° 7/12-12/12 Ventilated Flat Roof Flashing (Tall Cone) Ventilated Adj. Flashing 19/12-24/12 Ventilated Adj. Flashing 13/12-18/12 Ventilated Chimney Cap with Spark Arrestor 6"-8" Storm Collar

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 set 1 set 1 set 1 1 1 1 1 1 10 1 1 2 1 Set 2 2

5 9 21 22 7 15 14 7 7 7 7 14 15 9 7 10 15 20 10 12 8 7 7 9 13 19 21 5 10 7 13 14 6 10 3 9 9 3 9 4

$84.08 113.65 238.27 218.08 95.52 154.61 205.94 315.92 461.75 405.58 569.65 290.78 321.65 100.55 68.77 109.22 118.85 184.89 105.66 166.84 83.81 97.23 65.29 70.38 67.50 77.23 97.47

8" Tees and Elbows

Flat Roof Flashing

Storm Collar

8" Supports

SD9245N SD9247N SD9248AN SD9248BN SD9248DN SD9272 SD9272SS

8" Firestop

SD9243N SD9243SS SD9244 SD9946 SD9980A SD9980B SD9980C SD9249V SD9250V SD9251V SD9252V SD9281V SD9284 SD9959 SD1468 SD9201 SD9260 SD9262 SD9268 SD9268SS Elbow Strap

8" Caps and Flashings

Wall Strap

76.91 128.38 90.42 250.33 173.32 Extended Roof 108.52 Bracket 11.94 46.28 63.28 35.04 66.61 33.02 38.18

8" Accessories

* Chase Air Intake w/Rodent Guard * Base Plate * Elbow Strap Extended Roof Bracket Wall Strap * Stainless Wall Strap

Base Plate

125

Associated Energy Systems, Serving you with warehouses in: Kent, WA :: West Sacramento, CA :: Denver, CO

02/08

to order call 1-800-682-9722 :: www.aes4home.com

100

dvl Close ClearanCe ConneCtor

Class "A" Chimney, Dampers and Caps DVL double-wall stovepipe is engineered for enhanced safety and superior stove performance. The DVL double-wall air insulated design is made to reduce clearance to combustibles. DVL improves stove performance by maintaining high flue gas temperatures for a strong, steady draft. · · · · · · Available in sizes 6", 7"* and 8" diameters Durable .012" type 430 stainless steel inner liner Drip-free design, no cutting or crimping 6" clearance to walls, 8" clearance to ceilings U.L. listed to 2100° F 25-year warranty

sImpson dura-vent

DVL Close Clearance Connector

Double wall close clearance connector stovepipe is available in 6", 7"* and 8" diameters for installation with minimum clearance to combustibles (6" to walls, 8" to ceilings). DVL is constructed with a stainless steel inner wall for long lasting performance and safety. For mobile home installations, follow the appliance manufacturer's installation instructions. DVL Adjustable Length Used whenever fixed lengths of DVL are not appropriate because of interior obstructions. There is approximately 3" of adjustment on the 6" length, and 7" of adjustment on the 12" length of pipe. All pieces must have a minimum 1" overlap with all connecting pipe. DVL Telescoping Length Allows one piece installation from stove to ceiling support box with close clearance connector. Available in 29"-48" and 40"-68" extensions. Easy to install; no cutting required. DVL Close Clearance Adapter This stainless steel close clearance adapter is the only part that will allow for a connection from double wall DVL to Dura/Plus for a through-the-wall or ceiling support installation. Pipe cannot attach properly without this part. DVL Oval to Round Adapter Used on appliances with oval flue collars and allows adaption to round pipe. DVL Increaser To increase from a smaller appliance flue outlet to larger diameter chimney . Must be used with a close clearance adapter when connecting to the support box. DVL Adapter Section Connects DVL pipe to the appliance flue outlet. The damper is optional. To be used as a stove adapter. DVL Elbows Offsets obstructions as needed and angles DVL pipe towards the chimney's thimble or the appliance flue outlet. Elbows are not adjustable. 90° elbow not recommended for rear exit appliances. DVL Tee Tee comes with convenient clean-out cap. For use with rear exit appliances.

DVL Length

DVL Adjustable Length

DVL Telescoping Length

DVL Close Clearance Adapter

126

02/08

Prices Subject to Change Without Notice

Stock & Freight: *Non-stock **Limited stock Cannot ship U.P.S. Oversize U.P.S. ¥No U.P.S. Freight Program

to order call 1-800-682-9722 :: www.aes4home.com

6" & 8" dvl Close ClearanCe ConneCtor

(6" I.D. - 7" O.D.)

6" DVL Double Wall Lengths

Item No. S&F Description Pkg. Wt./Cs. (lbs.) Retail

sImpson dura-vent

100

SD8648 SD8624 SD8618 SD8612 SD8606 SD8687 SD8685 SD8647 SD8646 SD8670 SD8674 SD8679 SD8680 SD8667 SD8655 SD8645 SD8690

¥ 48" Length 24" Length 18" Length 12" Length 6" Wall Length 12" Adjustable Length (7" adjustment) 6" Adjustable Length (3" adjustment) ¥ 40"-68" Telescoping Length ¥ 29"-48" Telescoping Length * Oval to Round Adapter Close Clearance Adapter Adapter/Damper Section Adapter Section without Damper * Increaser 5"-6" * Black Tee 45° Black Elbow 90° Black Elbow

1 1 1 1 1 1 1 1 1 1 6 1 1 1 1 1 1

12 7 5 4 2 4 2 18 13 5 2 3 2 3 5 3 4

$108.90 70.83 51.13 43.01 40.30 53.41 43.73 171.21 129.04 90.43 20.68 52.05 38.06 66.54 72.61 56.08 84.02

Class "A" Chimney, Dampers and Caps

Oval to Round Adapter

6" DVL Adapters and Increasers

Increaser

6" DVL Double Wall Tees and Elbows

(7" I.D. - 8" O.D.)

7" DVL Double Wall Lengths

Item No. S&F Description Pkg. Wt./Cs. (lbs.) Retail

Adapter Section

SD8748 SD8724 SD8718 SD8712 SD8706 SD8787 SD8785 SD8747 SD8746 SD8774 SD8779 SD8780 SD8767 SD8755 SD8745 SD8790

*¥ * * * * * * ¥ ¥ * * * *

48" Length 24" Length 18" Length 12" Length 6" Wall Length 12" Adjustable Length (7" adjustment) 6" Adjustable Length (3" adjustment) 40"-68" Telescoping Length 29"-48" Telescoping Length Close Clearance Adapter Adapter/Damper Section Adapter Section without Damper Increaser 6"-7"

1 1 1 1 1 1 1 1 1 6 1 1 1 1 1 1

13 7 5 4 2 4 2 18 15 3 4 2 3 5 4 5

$127.60 90.30 72.92 57.18 50.31 61.92 63.78 182.91 137.77 24.16 62.49 47.93 63.66

90° Elbow

7" DVL Adapters and Increasers

7" DVL Double Wall Tees and Elbows

* Black Tee * 45° Black Elbow * 90° Black Elbow 94.29 69.21 102.51

45° Elbow

Tee

Associated Energy Systems, Serving you with warehouses in: Kent, WA :: West Sacramento, CA :: Denver, CO

127

02/08

to order call 1-800-682-9722 :: www.aes4home.com

100

8" dvl Close ClearanCe ConneCtor

(8" I.D. - 9" O.D.)

Class "A" Chimney, Dampers and Caps

sImpson dura-vent

8" DVL Double Wall Lengths

Item No. S&F Description Pkg. Wt./Cs. (lbs) Retail

SD8848 ¥ 48" Length 1 15 $146.80 SD8824 24" Length 1 2 90.68 SD8818 18" Length 1 6 84.04 SD8812 12" Length 1 5 64.94 Oval to SD8806 * 6" Length 1 3 57.00 Round Adapter SD8887 12" Adjustable Length (7" adjustment) 1 5 75.27 SD8885 * 6" Adjustable Length (3" adjustment) 1 3 62.38 SD8847 ¥ 40"-68" Telescoping Length 1 23 204.24 SD8846 ¥ 29"-48" Telescoping Length 1 17 169.53 8" DVL Adapters and Increasers SD8874 Close Clearance Adapter 6 3 25.01 SD8870 * Oval to Round Adapter 1 5 90.43 SD8879 * Adapter/Damper Section 1 4 80.51 Increaser SD8880 * Adapter Section without Damper 1 2 58.82 SD8867 * Increaser 7"-8" 1 4 69.53 SD8860 Increaser 6"-8" 1 4 69.53 Designed to fit on the last upper most section of DVL connector pipe. A close clearance adapter must be used. 8" DVL Double Wall Tees and Elbows SD8855 * Black Tee SD8845 45° Black Elbow SD8890 * 90° Black Elbow 1 1 1 7 5 6 122.60 79.71 113.84

Adapter Section

90° Elbow

45° Elbow

128

02/08

Prices Subject to Change Without Notice

Tee

Stock & Freight: *Non-stock **Limited stock Cannot ship U.P.S. Oversize U.P.S. ¥No U.P.S. Freight Program

to order call 1-800-682-9722 :: www.aes4home.com

dura-blaCk sIngle wall blaCk pIpe

Dura-Black single-wall, 24-gauge drip free black stovepipe features die-formed end fittings and adjustable lengths that eliminate cutting and crimping. 18" clearance to combustibles required for single wall stovepipe. Warranted for a period of five years from installation. Single Wall Length To calculate the installed length, subtract 1-1/4" from the "B" measurement (reference the Simpson Dura-Vent brochure at the end of the section). "B" length is overall height of the pipe length. Slip Connector Connects Dura-Black pipe to ceiling support box or wall thimble. Allows 10 inches of adjustment for an easy, drip free installation without cutting the pipe. Required for proper connection of pipe. Elbows For offsetting Dura-Black stovepipe. Elbows are not adjustable. Tee Use the Dura-Black tee for a drip-free 90° turn with rear exit appliances. Includes clean-out cap. Stovetop Adapter Suitable for appliance flue outlets from the size specified to 1/8" smaller inside diameter. Double Skirted Stovetop Adapter Adapts appliance flue outlets from the size specified to 3/8" smaller inside diameter. Increaser To increase from smaller appliance flue outlet to a larger diameter chimney. Trim Collar Use to trim pipe at ceiling support box or wall thimble. Oval to Round Adapter The bottom end ovals easily to connect to the oval flue outlet of the appliance.

90° Elbow Class "A" Chimney, Dampers and Caps

sImpson dura-vent

100

Single Wall Length

Slip Connector

45° Elbow

Damper Section A short pipe section with the damper conveniently pre-installed. 6"-8" Slip Increaser Adapts from 6" Dura-Black to 8" Dura/Plus neatly at the ceiling support box or wall thimble. No slip connector needed.

Tee

Stovetop Adapter

Associated Energy Systems, Serving you with warehouses in: Kent, WA :: West Sacramento, CA :: Denver, CO

129

02/08

to order call 1-800-682-9722 :: www.aes4home.com

100

5"-7" dura-blaCk sIngle wall blaCk pIpe

Class "A" Chimney, Dampers and Caps

To calculate the installed lengths, subtract 1-1/4" from each length of chimney pipe.

sImpson dura-vent

5" Dura-Black Single Wall Accessories

Item No. S&F Description Pkg. Wt./Cs. (lbs.) Retail

SD6589 6" Dura-Black SD1648 SD1624 SD1612 6" Dura-Black SD1670 SD1645 SD1690 SD1655 SD1677 SD1672 SD1667 SD1668 SD1675 SD1605 SD8674 SD6689 7" Dura-Black SD1748 SD1724 SD1712 7" Dura-Black SD1770 SD1745 SD1790 SD1755 SD1777 SD1772 SD1767 SD1768 SD1775 SD1705 SD8774 SD6789

* Snap-Lock Adapter Single Wall Pipe 48" Length 24" Length * 12" Length Single Wall Accessories 14" Black Slip Connector 45° Black Elbow 90° Black Elbow * Black Tee with Clean-Out Cap Stovetop Adapter * Double Skirted Stovetop Adapter * Increaser 5"-6" * Trim Collar * Round to Oval Adapter * Damper Section DVL/Dura Black Chimney Adapter Snap-Lock Adapter Single Wall Pipe * 48" Length * 24" Length * 12" Length Single Wall Accessories * 14" Black Slip Connector * 45° Black Elbow * 90° Black Elbow * Black Tee with Clean-Out Cap * Stovetop Adapter * Double Skirted Stovetop Adapter * Increaser 6"-7" * Trim Collar * Round to Oval Adapter * Damper Section * DVL/Dura Black Chimney Adapter * Snap-Lock Adapter

1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 1

1 8 4 3 3 2 3 3 1 2 2 1 3 2 2 1 9 5 3 3 2 3 5 1 2 2 1 3 3 3 1

$39.92 35.72 21.19 18.93 25.56 19.08 23.97 55.82 16.91 21.54 24.20 11.13 20.17 29.28 20.68 43.02 37.19 27.55 21.57 28.61 24.74 24.90 71.82 21.89 23.76 26.63 12.48 21.65 43.02 24.16 49.61

Double Skirted Stovetop Adapter

Increaser

Trim Collar

Oval to Round Adapter

Damper Section

130

02/08

Prices Subject to Change Without Notice

Slip Increaser

Stock & Freight: *Non-stock **Limited stock Cannot ship U.P.S. Oversize U.P.S. ¥No U.P.S. Freight Program

to order call 1-800-682-9722 :: www.aes4home.com

8"

and

10" dura-blaCk sIngle wall blaCk pIpe

Class "A" Chimney, Dampers and Caps Double Skirted Stovetop Adapter

sImpson dura-vent

100

To calculate the installed lengths, subtract 1-1/4" from each length of chimney pipe.

8" DuraBlack Single Wall Pipe

Item No. S&F Description Pkg. Wt./Cs. (lbs.) Retail

* 48" Length SD1848 SD1824 24" Length SD1812 12" Length 8" DuraBlack Single Wall Accessories SD1870 14" Black Slip Connector * 45° Black Elbow SD1845 * 90° Black Elbow SD1890 * Black Tee with Clean-Out Cap SD1855 * Stovetop Adapter SD1877 * Double Skirted Stovetop Adapter SD1872 * Increaser 7"-8" SD1867 * Trim Collar SD1868 * Round to Oval Adapter SD1875 * Damper Section SD1805 SD1860 Slip Increaser 6"-8" SD8874 DVL/Dura Black Chimney Adapter SD6889 Snap-Lock Adapter 10" DuraBlack Single Wall Pipe * 24" Length SD2024 * 12" Length SD2012 10" DuraBlack Single Wall Accessories * 14" Black Slip Connector SD2070 * 45° Black Elbow SD2045 * 90° Black Elbow SD2090 * Black Tee with Clean-Out Cap SD2055 * Double Skirted Stovetop Adapter SD2072 * Increaser 8"-10" SD2067 * Increaser 9"-10" SD2069 * Trim Collar SD2068

1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 1 1 1 1 1 1 1 1 1 1 1

10 5 4 3 3 4 5 2 2 2 1 3 4 4 3 2 7 4 5 3 5 7 2 3 3 1

$40.31 24.73 19.53 29.42 22.81 31.33 77.77 23.44 25.42 27.85 11.11 24.01 34.23 37.00 25.01 52.74 34.15 27.33 43.33 35.09 34.15 108.31 36.53 36.04 37.66 15.31

Increaser

Trim Collar

Oval to Round Adapter

Damper Section

Slip Increaser

Associated Energy Systems, Serving you with warehouses in: Kent, WA :: West Sacramento, CA :: Denver, CO

131

02/08

to order call 1-800-682-9722 :: www.aes4home.com

100

Lengths

Item No S&F Description

24-gauge matte blaCk stove pIpe

Class "A" Chimney, Dampers and Caps

Pkg Wt./Cs (lbs.) Retail

norwesCo

NM512 NM524 NM548 NM612 NM624 NM648 NM712 NM724 NM812 NM824 NM848 NM1012 NM1024 NM5T NM6T NM7T NM8T NM6PLUG NM7PLUG NM8PLUG NM10PLUG

5" x 12" Perma-lock Length 5" x 24" Perma-lock Length * 5" x 48" Closed Seam Length 6" x 12" Perma-lock Length 6" x 24" Perma-lock Length 6" x 48" Closed Seam Length 7" x 12" Perma-lock Length 7" x 24" Perma-lock Length 8" x 12" Perma-lock Length 8" x 24" Perma-lock Length 8" x 48" Closed Seam Length 10" x 12" Perma-lock Length 10" x 24" Perma-lock Length * 5" Tee 6" Tee 7" Tee 8" Tee 6" Uncrimped Plug 7" Uncrimped Plug 8" Uncrimped Plug 10" Uncrimped Plug * 5" x 45° Black Adjustable Elbow 5" x 90° Black Adjustable Elbow * 6" x 45° Black Adjustable Elbow * 6" x 45° Black Fixed Elbow 6" x 90° Black Adjustable Elbow 6" x 90° Stainless Adjustable Elbow * 6" x 90° Black Fixed Elbow * 7" x 45° Black Adjustable Elbow 7" x 90° Black Adjustable Elbow 7" x 90° Stainless Adjustable Elbow 8" x 90° Black Adjustable Elbow 8" x 90° Stainless Adjustable Elbow 10" x 90° Black Adjustable Elbow 5" Slip Joint 6" Slip Joint 7" Slip Joint 8" Slip Joint 10" Slip Joint * 5" 6" 7" 8" 5" 6" 6" 7" 8" Stove Stove Stove Stove x x x x x Adapter Adapter Adapter Adapter

10 10 4 10 10 4 10 10 10 10 4 10 10 12 12 6 6 12 12 12 12 12 12 12 12 12 6 12 12 12 6 12 6 12 6 6 6 6 6 12 12 12 12 6 6 6 6 6 12

15 30 32 17 36 27 20 40 22 46 35 27 54 24 28 20 24 7 9 10 15 9 13 13 13 20 9 20 15 22 11 30 14 44 11 13 14 17 19 11 14 16 19 7 8 10 10 11 8

$10.90 11.50 27.70 10.90 12.20 29.20 11.50 14.30 12.20 15.50 36.30 18.30 22.50 28.80 28.70 30.20 35.70 11.90 16.40 15.20 19.60 18.10 13.00 15.60 17.40 13.10 40.30 14.60 18.20 15.40 47.10 16.10 53.70 25.80 20.70 20.70 22.30 23.90 28.50 22.20 21.80 24.00 25.00 19.70 19.70 23.60 23.60 27.80 9.70

Length

Tees and Cleanout Plugs

Tee and CleanOut Plug

Elbows

NM545E NM590E NM645E NM645EF NM690E NM690ES NM690EF NM745E NM790E NM790ES NM890E NM890ES NM1090E

90° Black Elbow

Slip Joints

NM5SJ NM6SJ NM7SJ NM8SJ NM10SJ

Stove Adapters

NM5SA NM6SA NM7SA NM8SA

Slip Joint

Increasers

NM56SEC NM67SEC NM68SEC NM78SEC NM810SEC NM67OR

Prices Subject to Change Without Notice

6" Increaser 7" Increaser 8" Increaser 8" Increaser 10" Increaser

Stove Adapter

132

04/08

7" Oval to 6" Round Adapter, Blue metal, no crimp

Stock & Freight: *Non-stock **Limited stock Cannot ship U.P.S. Oversize U.P.S. ¥No U.P.S. Freight Program

to order call 1-800-682-9722 :: www.aes4home.com

"relIanCe lIner"

by amerICan reduCers/InCreasers

hearth

100

American Hearth Products "Reliance" Reducer/Increasers

American Hearth Products "Reliance Liner" brand, matte black, 24-gauge. One piece, spun. Attractive, durable and requires less space than tapered reducers.

Item No. S&F Description Pkg. Wt./Cs. (lbs.) Retail

Class "A" Chimney, Dampers and Caps

RM3X6BLK RM3X8BLK RM4X6BLK RM4X8BLK RM5X6BLK RM6X7BLK RM6X8BLK RM6X9BLK RM6X10BLK RM8X10BLK RM8X12BLK RM9X10BLK

*

* * * *

3" 3" 4" 4" 5" 6" 6" 6" 6" 8" 8" 9"

x x x x x x x x x x x x

6" Reducer/Increaser 8" Reducer/Increaser 6" Reducer/Increaser 8" Reducer/Increaser 6" Reducer/Increaser 7" Reducer/Increaser 8" Reducer/Increaser 9" Reducer/Increaser 10" Reducer/Increaser 10" Reducer/Increaser 12" Reducer/Increaser 10" Reducer/Increaser

1 1 1 1 1 1 1 1 1 1 1 1

4 5 6 7 7 8 10 10 11 11 11 11

$29.00 31.00 29.00 31.00 24.00 26.00 27.00 27.00 27.00 31.00 43.00 30.00

Increaser Small End Crimped Reliance Liner

Reliance Reducer/ Increaser

24-gauge matte blaCk stove pIpe

Reducer

NM56LEC NM67LEC NM68LEC NM78LEC NM810LEC NM56NC NM89NC NM910NC 5" 6" 6" 7" 8" x x x x x 6" Reducer 7" Reducer 8" Reducer 8" Reducer 10" Reducer 6 6 6 6 6 6 6 6 12 12 12 12 12 12 12 12 12 12 12 12 7 8 10 10 11 7 10 12 3 3 9 7 20 22 32 3 8 10 17 20 19.70 19.70 23.60 23.60 27.80 23.50 25.20 29.10 9.70 9.70 12.30 12.30 19.40 19.30 40.20 6.90 6.50 6.60 9.50 11.80 Collar

norwesCo

Reducer/Increasers (28-Gauge)

5" x 6" Reducer/Increaser, no crimp * 8" x 9" Reducer/Increaser, no crimp 9" x 10" Reducer/Increaser, no crimp 6" Stove Pipe Collar 7" Stove Pipe Collar 8" Stove Pipe Collar 10" Stove Pipe Collar 6" Galvanized China Cap * 7" Galvanized China Cap 8" Galvanized China Cap 6"-8" Litho Flue Stop 5" 6" 7" 8" Cast Cast Cast Cast Iron Iron Iron Iron Stove Stove Stove Stove Pipe Pipe Pipe Pipe Damper Damper Damper Damper

Reducer Large End Crimped

Collars

NM6SPC NM7SPC NM8SPC NM10SPC

China Cap

NM6CCG NM7CCG NM8CCG NMD19 China Cap

Dampers

NM5DAMP NM6DAMP NM7DAMP NM8DAMP Litho Flue Stop

Cast Iron Damper

Associated Energy Systems, Serving you with warehouses in: Kent, WA :: West Sacramento, CA :: Denver, CO

133

04/08

to order call 1-800-682-9722 :: www.aes4home.com

100

6" saF-t pIpe

Class "A" Chimney, Dampers and Caps

heatFab

High-performance chimneys and vents.

Saf-T Pipe is the highest quality stove pipe available ­ manufactured by Heatfab, a leader in hearth industry products for more than 20 years. For coal and wood-burning stoves, fireplaces and central heaters, Saf-T pipe is unmatched for safety, durability and ease of installation. Saf-T Pipe has a consistent fit and is constructed from 22-gauge cold-rolled steel ­ up to 60% thicker than most pipe on the market! Featuring invisible continuous-seam laser welding and high-quality silicone-based black stove paint. Joints fit tightly for safe venting, eliminating the release of soot and flue gas to interior environments. Secure, reliable and virtually smoke-free. 6" Lengths

Item No. S&F Description Pkg. Retail

Tee

HT2602B HT2604B HT2605B HT2606B HT2607B HT2608B 6" Tees HT2616B HT2616CR * HT2617B 6" Elbows HT2611B HT2614AB HT2614B 6" Slip Connectors HT2624B 6" Reducers HT2645B 5" & 6" Increasers HT2526B * HT2627B HT2628B 6" Accessories HT2600B

6" 6" 6" 6" 6" 6"

x x x x x x

12" Straight Length 18" Straight Length 24" Straight Length 38-70" Adjustable Length 36" Straight Length 48" Straight Length

6 4 6 2 6 4 4 4 4 4 1 4 4 4

$19.50 23.10 26.05 76.35 37.35 48.55 37.35 52.10 24.25 24.85 43.25 29.05 23.10 20.75 20.75 30.80 25.40 15.40

Tee Cover

6" Tee w/6" take off 6" Tee Crimped w/6" crimped take off 6" Tee Cover 6" x 45° Elbow 6" x 90° Adjustable Elbow 6" x 90° Elbow 6" x 2"-16" Adjustable Slip Connector 6" x 5" Reducer, 6" end crimped 5" x 6" Increaser, 5" end crimped 6" x 7" Increaser, 6" end crimped 6" x 8" Increaser, 6" end crimped 6" Wall Trim Collar

Adjustable Elbow

90° Elbow

4 4 12

Slip Connector

Trim Collar

134

02/08

Prices Subject to Change Without Notice

Stock & Freight: *Non-stock **Limited stock Cannot ship U.P.S. Oversize U.P.S. ¥No U.P.S. Freight Program

to order call 1-800-682-9722 :: www.aes4home.com

7" saF-t pIpe

Saf-T Pipe is the highest quality stove pipe available ­ manufactured by Heatfab, a leader in hearth industry products for more than 20 years. For coal and wood-burning stoves, fireplaces and central heaters, Saf-T pipe is unmatched for safety, durability and ease of installation. Saf-T Pipe has a consistent fit and is constructed from 22-gauge cold-rolled steel ­ up to 60% thicker than most pipe on the market! Featuring invisible continuous-seam laser welding high-quality silicone-based black stove paint. Joints fit tightly for safe venting, eliminating the release of soot and flue gas to interior environments. Secure, reliable and virtually smoke-free. 7" Lengths

Item No. S&F Description Pkg. Retail

heatFab

100

Class "A" Chimney, Dampers and Caps

High-performance chimneys and vents.

Tee

HT2702B * HT2704B * HT2705B * HT2706B * HT2707B * HT2708B * 7" Tees HT2716B * HT2716CR * HT2717B * 7" Elbows HT2711B * HT2714AB * HT2714B * 7" Slip Connectors HT2724B * 7" Reducers HT2746B * 7" Increasers HT2728B * 7" Accessories HT2700B *

7" 7" 7" 7" 7" 7"

x x x x x x

12" Straight Length 18" Straight Length 24" Straight Length 38-70" Adjustable Length 36" Straight Length 48" Straight Length

4 4 4 2 4 4 3 3 4 2 1 4 4 4 4 12

$20.75 25.40 30.80 91.15 42.00 56.80 42.00 57.35 31.95 26.05 46.80 31.95 25.40 30.80 33.15 15.40

Tee Cover

7" Tee w/7" take off 7" Tee Crimped w/7" take off 7" Tee Cover 7" x 45° Elbow 7" x 90° Adjustable Elbow 7" x 90° Elbow 7" x 2"-16" Adjustable Slip Connector 7" x 6" Reducer, 7" end crimped 7" x 8" Increaser, 7" end crimped 7" Wall Trim Collar

Adjustable Elbow

90° Elbow

Slip Connector

Trim Collar

135

Associated Energy Systems, Serving you with warehouses in: Kent, WA :: West Sacramento, CA :: Denver, CO

02/08

to order call 1-800-682-9722 :: www.aes4home.com

100

8" saF-t pIpe

Class "A" Chimney, Dampers and Caps Saf-T Pipe is the highest quality stove pipe available ­ manufactured by Heatfab, a leader in hearth industry products for more than 20 years. For coal and woodburning stoves, fireplaces and central heaters, Saf-T pipe is unmatched for safety, durability and ease of installation. Saf-T Pipe has a consistent fit and is constructed from 22-gauge cold-rolled steel ­ up to 60% thicker than most pipe on the market! Featuring invisible continuousseam laser welding and high-quality silicone-based black stove paint. Joints fit tightly for safe venting, eliminating the release of soot and flue gas to interior environments. Secure, reliable and virtually smoke-free.

heatFab

High-performance chimneys and vents.

Tee

8" Lengths

Item No. S&F Description Pkg. Retail

HT2802B HT2804B HT2805B HT2806B HT2807B HT2808B

8" 8" 8" 8" 8" 8" 8" 8" 8" * 8"

x x x x x x

12" Straight Length 18" Straight Length 24" Straight Length 38-70" Adjustable Length 36" Straight Length 48" Straight Length w/8" take off Crimped w/8" take off Cover Plug, crimped

6 4 6 2 4 2 3 3 4 4 2 1 4 4 2 4 4 4 12 6 4

$20.75 25.40 30.80 91.15 42.00 56.80 42.00 57.35 31.95 42.00 26.05 46.80 31.95 25.40 66.00 29.05 33.15 25.40 15.40 63.90 46.80

Tee Cover

8" Tees

HT2816B HT2816CR HT2817B HT2817P Tee Tee Tee Tee

Adjustable Elbow

8" Elbows

HT2811B HT2814AB HT2814B HT2824B HT2824DV 8" x 45° Elbow 8" x 90° Adjustable Elbow 8" x 90° Elbow 8" x 2"-16" Adjustable Slip Connector ** 8" x 18" Slip Connector for Duravent 8" x 6" Reducer, 8" end crimped 8" x 7" Reducer, 8" end crimped 8" x 6" Increaser/Reducer, two big ends 8" Wall Trim Collar * 8" Round to Oval Offset Adapter 8" Round to Oval Concentric Adapter

8" Slip Connectors

8" Reducers

HT2846B HT2847B

90° Elbow

8" Increasers

HT2836B

8" Accessories

HT2800B

8" Stove Adapters

HT2858OV HT2858OVS

Slip Connector

Trim Collar

136

04/08

Prices Subject to Change Without Notice

Stock & Freight: *Non-stock **Limited stock Cannot ship U.P.S. Oversize U.P.S. ¥No U.P.S. Freight Program

to order call 1-800-682-9722 :: www.aes4home.com

"relIanCe lIner"

Single Wall Pipe Baffles

by

sIngle wall pIpe baFFles

amerICan hearth

100

A 24-gauge, matte black baffle covering half the circumference of a single wall flue. Screw-mounted to the flue with welded brackets which maintain 1" air space between the flue and the baffle. Other lengths, multiple and single wall baffles available by special order; contact AES Inside Sales for pricing. To determine the reduced clearance with the pipe baffle, please consult the appliance manufacturer.

Item No. S&F Description Retail

Class "A" Chimney, Dampers and Caps

RM612PB RM618PB RM624PB RM636PB RM648PB RM660PB RM672PB RM812PB RM824PB RM836PB RM848PB RM860PB RM872PB

6" * 6" 6" 6" 6" 6" 6" 8" 8" 8" 8" 8" 8"

x x x x x x x x x x x x x

12" 18" 24" 36" 48" 60" 72" 12" 24" 36" 48" 60" 72"

$ 29.00 31.00 34.00 39.00 45.00 51.00 56.00 31.00 36.00 44.00 49.00 53.00 60.00

Reliance Liner

ChImney hatChes

"Reliance Liner" Chimney Hatch

American Hearth Products Reliance brand hinged, airtight and insulated heavy gauge steel door designed to install in the side of a chimney. The outer door is made from 10-gauge plate steel with a flange on the inside. 1/4" stainless steel bolts secure the outer door to the 10-gauge angle iron frame and secure the frame to masonry in four places. A steel inner cover and insulation withstands temperatures up to 2300°F.

Item No. Minimum Masonry Opening Outer Frame Dimension Hatch Opening Retail

RM810

RM810 RM1212H

8" x 10" 12" x 12"

11-3/4" x 13-3/4" 16" x 16"

7-1/2" x 9-1/2" 11-1/2" x 11-1/2"

$ 99.00 114.00

Lyemance Chimney Hatch

Lyemance's cast aluminum tight sealing chimney door with an insulating blanket withstands up to 2300°F, also helps to prevent heat and air-conditioning loss. Mounts easily with four screws and silicone adhesive provided. Fits a minimum opening of 7-7/8" x 7-7/8". Lifetime warranty against rusting. LI88CO 8" x 8" 10-1/2" x 10 -1/2" 7-1/2" x 7-1/2" 87.00 LI88CO

137

Associated Energy Systems, Serving you with warehouses in: Kent, WA :: West Sacramento, CA :: Denver, CO

12/07

to order call 1-800-682-9722 :: www.aes4home.com

100

ChImney dampers

Class "A" Chimney, Dampers and Caps

lyemanCe

Top Sealing "Original" Damper

Lab tests show all Lyemance dampers to be up to 10 times more efficient in preventing heat loss than a new throat damper. A rubber enhanced silicone gasket creates a super-tight seal around the damper, reducing downdrafts and eliminating up to 90% of heating and cooling leaks. Lyemance dampers protect the flue from the elements, animals, and other debris from entering the flue, and are easy to open and close with "power level" assistance. Made of durable cast aluminum that won't rust or warp. Each damper kit contains 32' of stainless steel cable. Lifetime warranty.

Item No. Frame Size Minimum Inside Flue Size Maximum Inside Flue Size Height When Open Retail

LI88 LI817 LI913 LI1313 LI1216 LI1318 LI1717 LI12130

8" x 8" 8" x 17 " 9" x 13" 13" x 13" 12" x 16" 13" x 18" 17" x 17" 12" Round Damper

6-1/2" x 6-1/2" 5-3/4" x 14-1/4" 6-1/2" x 10" 10" x 10" 9 -1/4" x 12-3/4" 10" x 15-1/2" 15" x 15" 10-5/8" x 11-3/8"

8-1/2" x 8-1/2" 8-1/4" x 16-1/2" 8-1/2" x 12-1/2" 12-1/2" x 12-1/2" 12" x 15" 12-1/2" x 17-1/2" 17-1/2" x 17-1/2" 10-5/8" x 11-3/8"

3-1/4" 6-3/4" 4-1/4" 5" 5-1/4" 5" 6-1/2"

$193.00 212.00 198.00 202.00 236.00 241.00 289.00 240.00

Top Sealing "Original Plus Cap" Damper

The "OPC" Damper combines the proven dependability of the Top Sealing "Original" Damper with even more protection by adding a quality chimney cap and 3/4" mesh screen to the Lyemance patented butterfly damper design. When closed, the "OPC" reduces heat and air conditioning loss, down drafts and noise. When open, the cap and screen still protect the flue against rain, snow, sleet, birds, animals, debris and sparks. Each damper kit contains 32' of stainless steel cable and a tube of sealant. Lifetime warranty. LI913OPC 9" x 13" 6-1/2" x 10" 8-1/2" x 12-1/2" 9-3/4" 292.00 LI1313OPC 13" x 13" 10" x 10" 12-1/2" x 12-1/2" 9-3/4" 303.00 LI1318OPC 13" x 18" 10" x 15-1/2" 12-1/2" x 17-1/2" 9-3/4" 376.00

Damper Accessories

Item No. Description Retail

LI40 40' Extension Cable $34.00 LI50 50' Extension Cable 35.00 LIHRDWRE Hardware Kit 27.00 For original and Lock-top dampers. Includes bracket, handle, chain, brassing, nail anchors, allen wrench and instructions.

138

12/07

Prices Subject to Change Without Notice

Stock & Freight: *Non-stock **Limited stock Cannot ship U.P.S. Oversize U.P.S. ¥No U.P.S. Freight Program

to order call 1-800-682-9722 :: www.aes4home.com

ChImney dampers

"Lock-Top" Damper

The Ultimate Fireplace Damper! A non-restrictive damper that doesn't inhibit air-draw. Prevents heat and air conditioning loss. Seals out rodents, birds and insects with 3/4" mesh. Mesh meeting California regulations is available by adding "CA" after the item number; special order only, please contact AES for more information. Constructed of cast aluminum and easy to open and close. Serves as chimney cap when open. Contains 30' cable, hardware package and high-temp silicone.

Item No. Frame Size Minimum Inside Maximum Inside Flue Size Height Flue Size Wt. When Open Retail

lyemanCe

100

Class "A" Chimney, Dampers and Caps

LIFT88 LIFT813 LIFT817 LIFT1313 LIFT1317 LIFT1717

8" x 8" 8" x 13" 8" x 17" 13" x 13" 13" x 17" 17" x 17"

6" x 6" 6" x 9" 6" x 14" 9" x 9" 9" x 14" 14" x 14"

9" x 9" 9-1/2" x 12-1/2" 9" x 17-1/2" 12-1/2" x 12-1/2" 12-1/2" x 17-1/2" 17-1/2" x 17-1/2"

8" 8-1/2" 7-1/2" 9" 7-3/4" 7-1/4"

7 8 10 10 11 16

lbs. lbs. lbs. lbs. lbs. lbs.

$255.00 262.00 320.00 266.00 339.00 407.00

Sweep's Rings

An innovative flat cast aluminum ring that makes removal of the damper quick and easy. Simply remove the stainless steel bolts and lift off the damper without cutting through a thick layer of tough silicone. Saves time and effort.

Item No. S&F Damper Size Retail

LIFT88SR LIFT813SR LIFT817SR LIFT1313SR LIFT1317SR LIFT1717SR

Fits Fits Fits Fits Fits Fits

8" x 8" 8" x 13 " 8" x 17 " 13" x 13" 13" x 17 " 17" x 17 "

$64.00 60.00 64.00 64.00 64.00 89.00

RS Adapter

Allows you to install the "Lock-Top" Dampers on reline, solid wall, terra cotta and factory-built chimneys. Installs in minutes and is easily removed for cleaning and inspection. For use with an 8" x 8" Lock Top Damper. RS adapters are not for use with air insulated class A chimney. LIFTRS855 * Inside Diameter of Flue: 6" 108.00 LIFTRS875 * Inside Diameter of Flue: 8" 117.00 LIHRDWRE Hardware Kit 27.00

For original and Lock-top dampers. Includes bracket, handle, chain, brassing, nail anchors, allen wrench and instructions.

Dampers and Caps Qualify For FREE FREIGHT, See pg. J.

139

Associated Energy Systems, Serving you with warehouses in: Kent, WA :: West Sacramento, CA :: Denver, CO

12/07

to order call 1-800-682-9722 :: www.aes4home.com

100

us FIreplaCe produCts

Class "A" Chimney, Dampers and Caps

ChImney dampers

Seal Tight Damper

Damper seals in your heat and air conditioning, as well as animals, birds and insects. Constructed of stainless steel and aluminum components so damper will never rust or corrode. Damper is lined with a gasket to provide the tightest possible seal and is backed by a Lifetime Warranty. Damper comes with 50' of stainless steel cable.

Item No. S&F Frame Size Minimum Inside Flue Size Maximum Inside Flue Size Retail

US88SD US817SD US913SD US1216SD US1313SD US1318SD US1818SD

8" X 8" 8" X 17" 9" X 13" 12" X 16" 13" X 13" 13" X 18" 18" X 18"

6-3/4" X 6-3/4" 6-1/4" X 14-1/2" 6-1/2" X 10-1/2" 9-3/4" X 13" 10-1/8" X 10-1/8" 9-5/8" X 15" 15" X 15"

9" X 9" 8-3/4" X 16-3/4" 9" X 12-3/4" 11-3/4" X 15-1/2" 12-3/4" X 12-3/4" 12-3/4" X 17-1/2" 17-3/4" X 17-3/4"

$168.00 184.00 172.00 206.00 175.00 210.00 250.00

Accessories

Item No. S&F Description Retail

USSDHRDWRE USSDINSTALL

Seal Tight Hardware Pack (Includes Chain Assembly, Bracket, Nail Anchors, Tube of Adhesive, Allen Wrench & Instruction Sheet) Seal Tight Installation Pack (Includes Chain Assembly, Bracket, Nail Anchors, Tube of Adhesive, Allen Wrench & Instruction Sheet, 30' Cable)

$15.00 33.00

140

04/08

Prices Subject to Change Without Notice

Stock & Freight: *Non-stock **Limited stock Cannot ship U.P.S. Oversize U.P.S. ¥No U.P.S. Freight Program

to order call 1-800-682-9722 :: www.aes4home.com

100

us FIreplaCe produCts

ChImney dampers

Class "A" Chimney, Dampers and Caps

Energy Top Damper

Energy Top damper is fully gasketed to insure complete seal of the flue. The Energy Top opens as much as 81% higher than other dampers. Its superior design and spring strength opens to a preset height to ensure proper draft. Lifetime warranty. Comes with 50' of stainless cable. www.energytop.com

Item No. S&F Frame Size Minimum Inside Flue Size Maximum Inside Retail

US88ED US817ED US913ED US1313ED US1318ED US1818ED

8" X 8" 8" X 17" 9" X 13" 13" X 13" 13" X 18" 18" X 18"

7" x 7" 10" x 10" 7" x 10" 10" x 10" 10" x 15" 15" x 15"

10" 10" 10" 13" 13" 18"

x x x x x x

10" 18" 13" 13" 18" 18"

$224.00 281.00 231.00 234.00 285.00 357.00

Access Plates

Item No. S&F Description Retail

US88SR US817SR US913SR US1216SR US1313SR US1318SR US1818SR

8" x 8" Access Plate w/4-Hex Bolts and 4-Flat Washers 8" x 17" Access Plate w/4-Hex Bolts and 4-Flat Washers 9" x 13" Access Plate w/4-Hex Bolts and 4-Flat Washers 12" x 16" Access Plate w/4-Hex Bolts and 4-Flat Washers 13" x 13" Access Plate w/4-Hex Bolts and 4-Flat Washers 13" x 18" Access Plate w/4-Hex Bolts and 4-Flat Washers 18" x 18" Access Plate w/4-Hex Bolts and 4-Flat Washers

$46.00 46.00 46.00 46.00 46.00 46.00 64.00

Accessories

Item No. S&F Description Retail

USED50 USEDHRDWRE USEDINSTALL USSD501 USSD502 USSD503

Energy Top 50' Cable for All Sizes Energy Top Hardware Pack (Includes Chain Assembly, Bracket, Nail Anchors, Tube of Adhesive, Allen Wrench & Instruction Sheet) Energy Top Installation Pack (Includes Chain Assembly, Bracket, Nail Anchors, Tube of Adhesive, Allen Wrench & Instruction Sheet, 30' Cable) Energy Top 50' Cable for 9x13,13x13,12x16 & 13x18 Dampers Energy Top 50' Cable for 8x8 Damper Energy Top 50' Cable for 8x17 & 18x18 Dampers

$22.00 15.00 33.00 25.00 25.00 25.00

141

Associated Energy Systems, Serving you with warehouses in: Kent, WA :: West Sacramento, CA :: Denver, CO

04/08

to order call 1-800-682-9722 :: www.aes4home.com

100

"relIanCe lIner"

by

staInless steel ChImney Caps

amerICan hearth

Class "A" Chimney, Dampers and Caps

Stainless Steel chimney caps by Reliance Liner are stackable, taking up less stock space. A removable top allows convenient access for cleaning and installation. Made from both 22 and 24-gauge, 304 stainless steel. Featuring 6-point heavy-duty hammer-in fasteners for a secure attachment and a 3/4" x 3/4" stainless steel expanded metal screen. Custom sizes are available by special order; please call AES Inside Sales for pricing assistance. Lifetime warranty. California mesh is also available by adding "CA" after the item number, and CA caps are stocked at the West Sacramento, CA warehouse only.

Item No. Base Size Tile Dimension Minimum Outside Tile Dimension Maximum Outside Retail

Reliance Liner

RM9499 RM94913 RM941313 RM941317 RM941717

Item No.

9" x 9" 9-1/2" x 13-1/2" 13-1/2" x 13-1/2" 13-1/2" x 17-1/2" 17-1/2" x 17-1/2"

Description

7-1/2" x 7-1/2" 7-1/2" x 11-1/2" 11-1/2" x 11-1/2" 11-1/2" x 15-1/2" 15-1/2" x 15-1/2"

9" x 9" 9-1/2" x 13-1/2" 13-1/2" x 13-1/2" 13-1/2" x 17-1/2" 17-1/2" x 17-1/2"

$63.00 69.00 76.00 84.00 101.00

Retail

RM94LEG RM94BOLTS

Leg Kit For Chimney Caps 4/pc Set Extra Bolt Bags for RM94 Caps

11.00 12.00

08/07

hy-C ChImney Caps

bIg top multI-Flue

100% 304-stainless steel welded construction chimney cap with 24-gauge removable hood for easy cleaning and scalloped corners and rolled edges that add style and safety. 18-gauge, 3/4" expanded metal mesh, keeps out rain, birds, animals and debris. Standard mesh height is 8". Also features 24-gauge 304 stainless steel base flanges for extra strength in mounting. Tapmark masonry screw anchor attaches to chimney crown. Screws and adhesive are included. Models come fully assembled unless noted "KD", indicating Knocked Down. Lifetime warranty. Mesh meeting California regulations (18-gauge, 5/8" 100% 304 expanded stainless steel) is available by special order only, please call AES Inside Sales for more information.

Item No. S&F Base Size Hood Size Rise

Big Top Multi-F lue

Wt.

Retail

HCBT1319 HCBT1426KD HCBT1414 HCBT1537KD HCBT1717 HCBT1729KD HCBT1729-10KD HCBT1741KD HCBT1729-14KD HCBT1741-14KD

13" 14" 14" 15" 17" 17" * 17" 17" 17" 17"

x x x x x x x x x x

19" 26" 14" 37" 17" 29" 29" 41" 29" 41"

20-1/4" 22-1/4" 20-1/4" 22-1/4" 25-1/4" 22-1/4" 22-1/4" 22-1/4" 22-1/4" 22-1/4"

x x x x x x x x x x

25-1/4" 34-1/2" 20-1/4" 46-1/2" 25-1/4" 34-1/2" 34-1/2" 46-1/2" 34-1/2" 46-1/2"

8" 8" 8" 8" 8" 8" 10" 8" 14" 14"

11 15 10 19 13 16 16 20 16 20

lbs. $184.50 lbs. 239.10 lbs. 144.20 lbs. 288.20 lbs. 217.10 lbs. 233.70 lbs. 249.30 lbs. 288.20 lbs. 311.70 lbs. 383.00

142

05/08

Prices Subject to Change Without Notice

Stock & Freight: *Non-stock **Limited stock Cannot ship U.P.S. Oversize U.P.S. ¥No U.P.S. Freight Program

to order call 1-800-682-9722 :: www.aes4home.com

draFt kIng sIngle Flue ChImney Covers

An 8" high chimney cap, designed for outside mounting to provide 95% free air space. The free air space creates better draft and the durable construction provides strength to resist the elements. 18-gauge 3/4" expanded mesh is turned inward at the base to allow cover to rest firmly on the tile which closes any opening around the tile. Mesh meeting California regulations (18-gauge, 5/8" 100% 304 expanded stainless steel) is available by special order only, please call AES Inside Sales for more information. Available in all stainless steel or black painted galvanized steel. Class "A" Chimney, Dampers and Caps

hy-C ChImney Caps

100

Stainless Steel

Constructed of 304 stainless steel, a 24-gauge single piece stainless hood with roll formed edges and 16gauge base for extra strength. Stainless steel slotted hex-head bolts. Lifetime warranty.

Item No. S&F Outside Tile Size Minimum Outside Tile Size Maximum Outside Tile Size Wt. Retail

HCSS99U HCSS913U HCSS918U HCSS1111U HCSS1216U HCSS1313U HCSS1318U HCSS1515U HCSS1818U

9" x 9" 9" x 13" 9" x 18" 11" x 11" 12" x 16" 13" x 13" 13" x 18" 15" x 15" 18" x 18"

7-1/2" x 7-1/2" 7-1/2" x 11-1/2" 7-1/2" x 16-1/2" 9-3/4" x 9-3/4" 10" x 14" 11-1/2" x 11-1/2" 11-1/2" x 16-1/2" 13-3/4" x 13-3/4" 16-1/2" x 16-1/2"

9-1/2" x 9-1/2" 9-1/2" x 13-1/2" 9-1/4" x 18-1/4" 12" x 12" 12-1/4" x 16 -1/4" 13-1/2" x 13-1/2 " 13-1/4" x 18-1/4" 16" x 16" 18" x 18"

7 8 9 9 11 10 11 12 13

lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs.

$91.10 105.20 133.90 134.00 151.20 116.80 145.90 177.70 177.70

Black Painted Galvanized Steel

Features a black powder coat paint finish, 24-gauge single piece galvanized steel hood and 14-gauge base for extra strength. Slotted hex head bolts. 7 year warranty. HCCBO99 HCCBO913 HCCBO918 HCCBO1111 HCCBO1216 HCCBO1313 HCCBO1318 HCCBO1515 HCCBO1818 HCCBO2020 HCCBO815 HCCHZL HCCHZS 9" x 9" 7-1/2" x 7-1/2" 9" x 13" 7-1/2" x 11-1/2" 9" x 18" 7-1/2" x 16-1/2" 11" x 11" 9-3/4" x 9-3/4" 12" x 16" 10" x 14" 13" x 13" 11-1/2" x 11-1/2" 13" x 18" 11-1/2" x 16 -1/2" 15" x 15" 13-3/4" x 13-3/4" 18" x 18" 16-1/2" x 16-1/2" 20" x 20" 18-1/2" x 18-1/2" 14" Round Black Cap Single Flue Chimin-Eez Single Flue Chimin-Eez 9-1/2" x 9-1/2" 9-1/2" x 13-1/2" 9-1/4" x 18-1/4" 12" x 12" 12-1/4" x 16-1/4" 13-1/2" x 13-1/2" 13-1/4" x 18-1/4" 16" x 16" 18" x 18" 20-1/4" x 20-1/4" Large Small 7 8 10 10 12 10 12 14 15 15 9 10 8 lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. 51.60 57.70 65.00 65.00 71.20 62.50 69.90 89.50 89.50 103.00 88.20 68.00 56.10

* * * *

Leg Kits

For use when the flue tile does not extend above the crown. HCLK4 HCLK4SS Black Legs for Draft King Stainless Legs for Draft King 2 lbs. 2 lbs. 8.70 18.40

Draft King

Associated Energy Systems, Serving you with warehouses in: Kent, WA :: West Sacramento, CA :: Denver, CO

143

05/08

your InstallatIon/notes

Information

46 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

7799


You might also be interested in

BETA