Read Microsoft Word - Double Egress Hollow Metal Fire Doors and Frames 041907.doc text version

DOUBLE EGRESS HOLLOW METAL DOORS AND FRAMES

PRODUCT

1-3/4" (44 mm) thick pairs of doors swinging in opposite directions, in ratings up to 3 Hour fire protection. Double egress assemblies permit traffic flow in both directions through the same opening. Where double egress doors are used for 1-1/2 Hour applications or less, they may be installed without astragals. For 3 Hour rated double egress doors, an over-lapping astragal is required.

MAXIMUM DOOR OPENING

8'0" x 10'0" (2438 x 3048 mm)

MAXIMUM LEAF SIZE

Typical Elevations

4'0" x 10'0" (1219 x 3048 mm)

HARDWARE

Hinges: Offset Pivots: Locks, Latches, Deadbolts: Not Permitted Fire Exit Hardware: Overhead Closers: Floor Closers: Flush Bolts: Not Permitted

Typical Plan View

ANCHORS

Anchors are available for new or existing masonry, poured concrete and wood or steel stud partitions.

FRAMES

A fire rated frame listed for use with double egress doors is required.

Typical Head Alternate Head

SPECIFICATIONS

Frames shall be fabricated from hot rolled, cold rolled, galvanized, galvanealed or stainless steel. Refer to "Profiles for Fire Rated Frame Products."

Typical Jamb

150 Division Drive Wilmington, NC 28401 www.CustomMetalProductsNC.com

Revised 041907

Phone: 866-893-3338 Fax: 866-963-1355 [email protected]

Information

Microsoft Word - Double Egress Hollow Metal Fire Doors and Frames 041907.doc

1 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

792671


You might also be interested in

BETA
77-2148 EBI system architecture
STEELCRAFT_2002_catalog.qxd