Read DIVIDERS - SESCO (Page 26) text version

Wire & Cable

Single Core Cables Bare Copper Conductors Portable Cord Arc Welding Cables THW Copper Conductor THHN-THWN Copper Conductor TFFN Copper Conductor Romex UF and NMC Copper Conductor Coaxial Cable Instrumentation Cable

Saudi Cable Company Ducab Riyadh Cable Jeddah Cable MESC General Cable Alpha Manhattan Carol Triangle Belden Rock Bestos Custom Cable

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

LOW VOLTAGE POWER CABLES

Single core, PVC insulated annealed copper conductors (450/750 V)

Description

Single core cables with copper conductors, PVC insulated, rated 450/750 V conforming to SASO & BS 6004 specification number 55

Construction

Conductor

Plain annealed circular copper conforming to IEC:228, class 1 and 2. (Also available in aluminum conductors sizes 10 to 630 mm2).

Insulation

Heat resistive PVC type 5, rated 85°C to 856746 (PVC type 1, 70°C to 856746 also available).

To Order Applications

Typical applications include equipment wiring, switching and distribution installations in conduits on or under plaster. Order by catalogue number, quantity and packaging required.

Example

CJA 1- 10A, 2000 metres in 100 m coils.

Features

Insulation adheres tightly to conductors yet strips easily, leaves conductor clean PVC insulation has good electrical properties.

Note

If 70°C rated PVC insulation is desired, change the second letter to '0' in the catalogue number.

Example

The catalogue number for 25 mm2, 70°C rated PVC insulated copper conductor will be CDA1-10W.

Single core, PVC insulated annealed copper conductors Rated (450/750 V)

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

MEDIUM VOLTAGE POWER CABLES

Armoured cables PVC insulated 0.6/1 kV

Description

Multi-core cables with copper or aluminium conductors PVC insulated, armoured and PVC sheathed. Cables are rated 0.6/1 kV and conform to IEC:502.

Construction

Conductor

Plain circular or sector, solid or stranded copper and aluminium conductors, per IEC:228, class 1 and 2.

Assembly

Two, three or tour insulated conductors are laid up, filled with nonhygroscopic material compatible with the insulation and covered with layer of PVC bedding which may be an integral part of the filling

Colours for core identification

Two core - red and black Three core - red, yellow and blue Four core - red, yellow, blue and black

Application

These cables are most suitable for underground burial where there is a risk of mechanical damage.

Insulation

Heat resistive PVC type 5 to BS6746 rated 85DC for continuous operation. (PVC rated 70DC to 856746 also available on request).

Armour

Galvanized steel tapes or steel wires applied over the P'vC bedding.

Sheath

PVC type ST2 to IEC 502, colour - black

To Order

Order by catalogue number, quantity and packaging required. Example FJM4- 1 1A-A01, 8 km, 16 non returnable reels 5OO m each.

Armoured cables Copper Conductors PVC insulated 0.6/1 kV

DST armoured cables

DIMENSIONS AND WEIGHTS

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

Armoured cables Copper Conductors PVC insulated 0.6/1 kV

DST armoured cables

DIMENSIONS AND WEIGHTS

re-- Circular Solid Conductor rm-- Circular stranded Conductor sm-- sector stranded Conductor * Circular conductors can be provided on request

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

Armoured cables Copper Conductors PVC insulated 0.6/1 kV

RSW armoured cables DIMENSIONS AND WEIGHTS

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

Unarmoured cables XLPE insulated 0.6/1 kV

Description

Single core and multi-core cables with copper or aluminium conductors, XLPE insulated, and PVC sheathed. Cables are rated 0.6/1 kV and conform to IEC:502.

Construction

Conductor

Plain circular or sector solid/stranded copper or aluminium conductors, p~r IEC:228, class 1 and 2.

Assembly

Two,three or four insulated conductors are laid up, filled with nonhygroscopic material compatible with the insulation. The filling may be omitted provided the outer shape of the cable remains practically circular and no adhesion occurs between cores and sheath.

Colours for core identification

Single core - red ( black on request) Two core - red and black Three core - red, yellow and blue Four core - red, yellow, blue and black

Insulation

XLPE (Cross-linked polyethylene) insulation, rated 90°C.

Sheath

PVC type ST2 to IEC 502, colour - black

To Order Application

These cables have been designated for general use including underground burial, where they are not likely to suffer mechanical damage. Order by catalogue number, quantity and packaging required. Example ENH4-10A, 10km, (10x 1000), non returnable reels

Unarmoured cables Copper Conductors XLPE insulated 0.6/1 kV

DIMENSIONS AND WEIGHTS

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

Unarmoured cables Copper Conductors XLPE insulated 0.6/1 kV

DIMENSIONS AND WEIGHTS

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

Unarmoured cables Copper Conductors XLPE insulated 0.6/1 kV

DIMENSIONS AND WEIGHTS

23.8

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

INSTRUMENTATION & THERMOCOUPLE CABLES

OVERALL SHIELDED MULTIPAIR/MULTITRIAD

UL STANDARD 13, TYPE PLTC, CSA C22.2 NO. 214, PCC FT4 300 VOLT

INDIVIDUAL AND OVERALL SHIELDED MULTIPAIR/MULTITRIAD

UL STANDARD 13, TYPE PLTC, CSA C22.2 NO. 214, PCC FT4 300 VOLT

· When Shielded: Aluminum Polyester Tape and Tinned Copper Drain Wire · PVC Jacket ­ Black, UV Resistant

CHARACTERISTICS

OPERATING TEMPERATURE

CHARACTERISTICS

OPERATING TEMPERATURE

· --20OC to 105OC

SPECIFICATIONS

· · · · UL Standard 13, Type PLTC CSA C22.2 No. 214, PCC FT4 Passes UL Vertical Tray Flame Test Complies with NEC Article 725, Type PLTC · UL Listed, CSA Certified.

· --20OC to 105OC

VOLTAGE RATING

· 300 Volt

SPECIFICATIONS

· · · · UL Standard 13, Type PLTC CSA C22.2 No. 214, PCC FT4 Passes UL Vertical Tray Flame Test Complies with NEC Article 725, Type PLTC · UL Listed, CSA Certified.

PRODUCT DESCRIPTION

· Stranded Bare Copper Conductors · PVC Insulation Paired Construction Color Coded ­ One Black, One White Triad Construction Color Coded ­ One Black, One White, One Red White Conductor Printed with Pair/ Triad Number at one Inch Intervals for Easy Identification.

VOLTAGE RATING

· 300 Volt

PRODUCT DESCRIPTION

· Stranded Bare Copper Conductors · PVC Insulation Paired Construction Color Coded ­ One Black, One White Triad Construction Color Coded ­ One Black, One White, One Red White Conductor Printed with Pair/ Triad Number at one Inch Intervals for Easy Identification. · When Shielded: Aluminum Polyester Tape and Tinned Copper Drain Wire · PVC Jacket ­ Black, UV Resistant

AVAILABILITY

· Bulk, Cut to Length Available in 1000 ft (305m) put-ups

AVAILABILITY

· Bulk, Cut to Length Available in 1000 ft (305m) put-ups

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

THERMOCOUPLE WIRE AND CABLE

MULTIPAIR OVERALL SHIELDED & INDIVIDUALLY & OVERALL SHIELDED THERMOCOUPLE EXTEN. CABLE UL STANDARD 13, TYPE PLTC 150oC 300 VOLT

CHARACTERISTICS

OPERATING TEMPERATURE

· --20OC to 105OC Tape and Tinned Copper Drain Wire Facing In · ANSI Color-Coded PVC Jacket · PVC Jacket ­ Black, UV Resistant

VOLTAGE RATING

· 300 Volt

PRODUCT DESCRIPTION

· Solid Wire Matched and Calibrated to Standard Limits of Error per ISA Specification RP-1.1-3 and ANSI Circular MC 96.1 · ANSI Color-Coded PVC Insulation and Jacket · Twisted Pairs · Each Conductor Prited with a Pair Number at one Inch Intervals. Numbers are Printed Alternately and Inverted: · When Shielded: Aluminum/Polyster

SPECIFICATIONS

· · · · · · ISA Specificatin TP-1.1-3 ANSI Circular MC 96.1 Passes UL Vertical Tray Flame Test UL Standard 13, Type PLTC NEC Article 725, Type PLTC UL Listed

AVAILABILITY

· Bulk, Cut to Length · Items Marked with Also available in 100 ft. (105m) put-ups

UNSHIELDED/OVERALL SHIELDED MULTIPAIR INDIVIDUALLY AND OVERALL SHIELDED MULTIPAIR

UL STANDARD 1277, TYPE TC, 90oC 600 VOLT

CHARACTERISTICS

OPERATING TEMPERATURE

· --20OC to 90OC

SPECIFICATIONS

· UL Standard 1277, Type TC · Passes UL Vertical Tray Flame Test · Complies with NEC Article 340 (Article 725 Class 1 Not Ul Listed · UL Listed

VOLTAGE RATING

· 600 Volt

PRODUCT DESCRIPTION

· Stranded Bare Copper Conductors · PVC/Nylon Insulation Paired Construction Color Coded ­ One Black, One White White Conductor Printed with Pair/ Number for Easy Identification. · When Shielded: Aluminum Polyester Tape and Tinned Copper Drain Wire · PVC Jacket ­ Black, UV Resistant

AVAILABILITY

· Bulk, Cut to Length Available in 1000 ft (305m) put-ups

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

INSTRUMENTATION & THERMOCOUPLE CABLES

INSTRUMENTATION/PROCESS CONTROL CABLES POWER LIMITED TRAY

CABLES 300 VOLTS (TYPE PLTC) XLPE INSULATED MULTI PAIR/MULTI TRAID INDIVIDUAL & OVERALL SHIELDED Temperature range ­40oC to +90oC Specifications: UL13

Application: Can be used in cable tray, conduit or direct burial application for instrumentation / process control, in dry or wet locations. Conductor

Tinned copper to ASTM B33 & stranded to class B of ASTM B8.

Insulation

Flame retardant XLPE to ICEA S-66524.

PAIRS

Pair Colour Code

White and black with pair number on white conductor.

Triple Colour Code

White, black and red with triple number on white conductor.

Pairs/Triplers Twisting

All pairs / triples are twisted to counter electromagnetic noise.

Individual and Overall Each pair / triple is shielded with Shielding

aluminium polyester tape and a tinned copper drain wire, for maximum electrostatic noise and crosstalk rejection. All pair/triple shields are electrically isolated from each other. individually shielded pairs/ triples cabled with nonhygroscopic fillers if necessary and the entire assembly is shielded with aluminium polyester tape and a tinned copper drain wire.

Jacket

Extruded black PVC as per UL13, oil and sunlight resistant, passes flame test as per IEEE - 383 (70000 BTU). The jacket is impervious to vapour and moisture penetration.

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

INSTRUMENTATION/PROCESS CONTROL CABLES POWER LIMITED TRAY

CABLES 300 VOLTS (TYPE PLTC) WIRE ARMOURED XLPE INSULATED MULTI PAIR/TRIAD OVERALL SHIELDED Temperature range ­40oC to +90oC Specifications: UL13

Application: Can be used in cable tray, conduit or direct burial application for instrumentation/process control, in dry or wet location. The wire armour provides longitudinal strength for use as a messenger cable or for support in vertical drops (NEC SECTION 300-19) and provides the protection against the mechanical damage.

Conductor

Tinned copper to ASTM B33 stranded to class B of ASTM B8. &

Insulation

Flame retardant XLPE to ICEA -66-524. S

PAIRS

Pair Colour Code

White and black with pair number on white conductor.

Triple Colour Code

White, black and red with triple number on white conductor.

Pairs/Triplers Twisting

All pairs / triples are twisted to counter electromagnetic noise.

Overall Shielding

Twisted Pairs/triples are cabled with non-hygroscopic fillers if necessary and the entire assembly is shielded with aluminum polyester tape and a tinned copper drain wire. Extruded black PVC as per UL13 A serving of round galvanised steel wires is applied with 90% minimum coverage. Extruded black PVC as per UL 13 is oil and sun light resistant and passes flame test as per IEEE-383 (70000 BTU)

Inner Jacket Wire armour Outer Jacket

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

INSTRUMENTATION & THERMOCOUPLE CABLES

BASIC CABLE CONSTRUCTION

The aim of cabling fibers is to provide adequate protection during cable installation and service to ensure that transmission properties remain stable throughout the life of the system. The overall design of an optical fiber cable depends upon the environmental conditions in which the cable is to be employed. as well as installation and service conditions. The optical fiber cable is a complicated composite cylindrical structure. In general the cable consists of the following six major components. (1) The loose tube/ tight buffer. made up of polybutylene terephthalate/ thermoplastic elastomer. (2) The central strength member (epoxyl glass rod or steel strands) acts as a strengthening element. and enables the cable to be held under tension at low strain. (3) The peripheral strength member (Aramidi Glass yarns) to supply the principal tensile strength to the cable during installation and to withstand everyday stress experienced by the cable. (4) Steel Armouring. corrugated transversly, is provided for giving lateral strength and bending flexibility to the cable. It makes the cable rodent and termite proof. (5) Filling gel, flooding gel. water blocking tape and moisture barrier tape are provided for protecting the cable from moisture and water. (6) An outer jacket (generally polyethylene) for providing necessary mechanical and environmental protection to the cable.

MEFC OPTICAL FIBER CABLES PRODUCT RANGE

INDOOR CABLES

1. 2. 3. 4. SIMPLEX CABLE DUPLEX (ZIPCORD) DUPLEX (Round) INDOOR TIGHT BUFFER CABLE.

OUTDOOR CABLES

1. 2. 3. 4. 5. DUCT CABLE DIRECT BURIED CABLE ARMOURED CABLE AERIAL (SELF-SUPPORTING) CABLE. HYBRID CABLE.

NOTE: Metallic duct & direct buried cables contain aluminium moisture barrier tape. Non-metallic cable consists of dielectric central ­ strength member & aramid/glass yarns. Armoured cables can be offered with steel wire & corrugated polymer coated steel tape armouring. All dielectric self supporting type & figure 8 type aerial cables are also available.

NATURAL PARAMETERS WHICH CAN AFFECT THE OPTICAL FIBER CABLES

PARAMETER EFFECT PROTECTION PROVIDED

QUALITY ASSURANCE

With our highly skilled and qualified workforce and sophisticated machinery, it is ensured that consistently high quality Optical Fiber Cables are delivered to the customers. Continuous quality checks during m a nu f a c t u r in g and comprehensive cable tests guarantee the quality, reliability and performance of the cables during installation and operation. Tests are conducted as per international standards (IEC, ITU - T, EIA/ TIA), and to meet customer specific requirements. After conducting various mechanical and environmental tests the results are evaluated to guarantee the integrity of transmission through optical fibers in the cable. Tensile stresses can occur during cable installation time. These stresses must not affect the functioning of optical fiber. Finished cables are type tested on tensile testing machine to measure fiber strain, " E f' cable strain "Ec" and change in attenuaton as a function of tensile load "F". Optical cables are subject to a wide variety of temperatures (-40" C to +70"C) during operation and storage. These changes should not affect the optical transmission in the fibers. In order to determine the performance of the cable over this wide temperature range, finished cable is put in a computer controlled climatic chamber and change in attenuation is measured by OTDR, as a function of temperature cycles. Beside these tests, all our cables are type tested for Impact resistance, Crush resistance, Torsion and repeated bending. Statistical quality control techniques are implimented to verify the consistency in product quality and continuously monitor the performance of the cable.

MOISTURE

Corrosion, Electric breakdown, Degradation of fiber mechanical strength.

Laminated water block tapes, Metalic moisture barrier tapes, Flooding gel/filling.

LIGHTNING

Puncture of cable sheath, Fusing Metallic tapes with good temp. of metallic parts. and electrical conductivity characteristics, or use of all dielectric cable. Degradation of Mechanical properties. Colour fading Use of additives in sheath/ jacket materials.

SUNLIGHT

RODENTS BIRDS, INSECTS Rainwater

Sheath Damage. Fiber Break

Corrugated steel Tape. Aluminium tape

Corrosion. Water penetration, Degradation of fiber mechanical strength. Thermal contraction/expansion

Flooding gel & Filling gel.

Temperature

Use of materials with low coefficient of thermal expansion. High tensile modulus, Enough margins between operating tensile loads & designed tensile loads.

WINDS

Increase in mechanical strain, Abrasive damage due to vibrations.

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

SIMPLEX O.F. CABLE (Tight Buffer) DUPLEX O.F. CABLE (Tight Buffer)

FEATURES

· · · · · · Simplex fiber can be either single mode or multi mode. Easier to use as Patch cords. Light, Flexible, Easy Connection and Handling Can be easily installed in Trays, Conduit or Duct. Flame retardant outer sheath. Can with Stand wide range of temperatures and high tensile loads.

FEATURES

· · · · · · Duplex fiber can be either single mode or multi mode. Easier to use as Patch cords. Light, Flexible, Easy Connection and Handling Can be easily installed in Trays, Conduit or Duct. Flame retardant outer sheath. Can with Stand wide range of temperatures and high tensile loads.

APPLICATION

· · · Indoor application. Local area Network Limited outdoor use.

APPLICATION

· · · Indoor application. Local area Network Limited outdoor use.

TECHNICAL SPECIFICATION

Fiber Strength member Out sheath Cable OD Cable weight Minimum bend radius Minimum bend radius Permissible tension Operating Temperature Storage temperature Silica based primary coated fiber Aramid yarn Flame retardant jacketing 3.0 mm 8.0 kg/Km 30mm (no load condition) 45 mm (load condition) Max. 450 Newton -20oC to +70oC -40oC to +70oC

TECHNICAL SPECIFICATION

Fiber Strength member Out sheath Cable OD Cable weight Minimum bend radius Minimum bend radius Permissible tension Operating Temperature Storage temperature Silica based primary coated fiber Aramid yarn Flame retardant jacketing 3.0 mm x 6.0mm 17 kg/Km 30mm (no load condition) 45 mm (load condition) Max. 685 Newton -20oC to +70oC -40oC to +70oC

Packaging Information

Type of packaging: Plastic reel flange 270mm Standard length: 1000ft.

Packaging Information

Type of packaging: Plastic reel flange 270mm Standard length: 500ft.

OPTICAL FIBER SPECIFICATIONS RISER-SIMPLEX

PART No. SXL-1 SXRS-2 SXRS-3 SXRS-4 Fiber Type MAXIMUM 50/125 62.5/125 100/140 SINGLE MODE TYPICAL MAXIMUM TYPICAL MAXIMUM TYPICAL MAXIMUM TYPICAL ATTENUATION db/km 850nm 1300nm 1550nm 3.5 2.6 3.5 2.9 5.0 4.5 n/a n/a 2.0 1.1 1.0 0.9 3.0 2.5 0.7 0.5 n/a n/a n/a n/a n/a n/a 0.7 0.5 n/a n/a 100 100 160 500 400 400 BANDWIDTH MZH-Km 850nm 1300nm

OPTICAL FIBER SPECIFICATIONS RISER-SIMPLEX

PART No. DXRS-1 DXRS-2 DXRS-3 DXRS-4 Fiber Type MAXIMUM 50/125 62.5/125 100/140 SINGLE MODE TYPICAL MAXIMUM TYPICAL MAXIMUM TYPICAL MAXIMUM TYPICAL ATTENUATION db/km 850nm 1300nm 1550nm 3.5 2.6 3.5 2.9 5.5 4.5 n/a n/a 2.0 1.1 1.5 0.9 3.5 2.5 1.5 0.5 n/a n/a n/a n/a n/a n/a 1.5 0.5 n/a n/a 100 100 160 500 400 400 BANDWIDTH MZH-Km 850nm 1300nm

OPTICAL FIBER SPECIFICATIONS PLENUM-SIMPLEX

PART No. SXPL-1 SXPL-2 SXPL-3 SXPL-4 SXPL-5 Fiber Type ATTENUATION db/km 850nm 1300nm 1550nm MAXIMUM 62.5/1.25 50/1225 100/140 SINGLE MODE 62.5/125 TYPICAL MAXIMUM TYPICAL MAXIMUM TYPICAL MAXIMUM TYPICAL MAXIMUM 3.5 2.9 3.5 2.6 5.5 4.5 n/a n/a 3.75 1.0 0.9 2.0 1.1 3.5 2.5 1.5 0.5 1.5 n/a n/a n/a n/a n/a n/a 1.5 0.5 n/a n/a 160 n/a 200 DXPL-4 DXPL-5 DXPL-3 100/140 SINGLE MODE 62.5/125 100 100 DXPL-2 50/1225 400 400 DXPL-1 62.5/1.25 160 500 BANDWIDTH MZH-Km 850nm 1300nm PART No. Fiber Type

OPTICAL FIBER SPECIFICATIONS PLENUM-SIMPLEX

ATTENUATION db/km 850nm 1300nm 1550nm MAXIMUM TYPICAL MAXIMUM TYPICAL MAXIMUM TYPICAL MAXIMUM TYPICAL MAXIMUM 3.5 2.9 3.5 2.6 5.5 4.5 n/a n/a 3.75 1.0 0.9 2.0 1.1 3.5 2.5 1.5 0.5 1.5 n/a n/a n/a n/a n/a n/a 1.5 0.5 n/a n/a 160 n/a 200 100 100 400 400 160 500 BANDWIDTH MZH-Km 850nm 1300nm

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

INDOOR O.F. CABLE (Tight Buffer) DIRECT BURIED O.F. CABLE

FEATURES

· · · · Conforms to MOPTT spec. MAT ­ 1602. All dielectric design for EMI immunity. Available UL listed type OFNR or OFNP type. Light weight & small ins size (easy installation)

FEATURES

· · · · The cable allows higher tensile load and larger pulling ­ in lengths. No stress on fibers during installation, operation & maintenance. The thixotropic jelly prevents axial migration of water. The cable sheaths are specially designed for aggressive environments.

APPLICATION

· · · Computer network. Local area networks Data Links.

APPLICATION

· · · · High speed voice, video & data communication. Telemetry and remote control. Local area network. Long haul network (Duct & Direct burial)

DESCRIPTION

The tight buffered optical fibers are assembled around the CSM. Which is possess excellent dielectric properties & high resistance to elongation & shrinkage. Aramid yarns serves as peripheral strength member. The outer sheath is made up of flame retardant halogen free copolymer compound. The cable is available up to 12 tight ­ buffered SM/MM optical fibers.

DESCRIPTION

The cable has been designed for outdoor underground (Direct ­ Burial) application. The PBT loose tubes prevent the optical fibers from axial or radial stresses by allowing free movement of fibers within the tube. Each loose tube (filled with high quality thixotropic gel) contains a maximum of 12 fibers. The cable is well guarded to protect optical & mechanical characteristics of the fibers. The outer jacket has been specially designed to be moisture ultraviolet & fungus resistant.

TIGHT BUFFERED OPTICAL FIBER CABLE ­ INDOOR PRODUCT No. FIBER COUNT OUTER DIA (mm) NET WEIGHT (kg) 48 49 55 65 75 STANDARD LENGTH (Meter) 5000 5000 5000 5000 5000 DRUM SIZE (Flange Dia. mm) 1000 1000 1000 1000 1100

MECHANICAL CHARACTERISTICS

Minimum bending radius Minimum bending radius Tensile strength 15 x cable dia. (no load) 20 x Cable dia. (Full load) 1KN (others upon request)

TBI-004 TBI-006 TBI-008 TBI-010 TBI-012

4 6 8 10 12

6.8 6.8 7.4 7.8 8.4

TEMPERATURE RANGE

Storage temperature Operating Temperature -20oC to +60oC -20oC to +70oC

MECHANICAL CHARACTERISTICS

Minimum bending radius Minimum bending radius Tensile strength 15 x cable dia. (no load) 20 x Cable dia. (Full load) 500N (others upon request) PRODUCT No.

TIGHT BUFFERED OPTICAL FIBER CABLE ­ INDOOR FIBER COUNT No. of LT No. of SM Fibers/LT OUTER DIA (mm) NET WEIGH T (kg) 140.00 141.50 142.00 142.00 174.00 176.00 211.00 218.00 250.00 297.00 DELIVERY LENGTH (Meter) 5000 5000 5000 5000 4000 4000 3000 3000 2500 2500 DRUM SIZE (Flange Dia. mm) 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800

TEMPERATURE RANGE

Storage temperature Operating Temperature -20oC to +60oC -20oC to +70oC DBR ­ 004 DBR ­ 006 DBR ­ 008 DBR ­ 012 DBR ­ 016 DBR ­ 024 DBR ­ 030 DBR ­ 036 DBR ­ 048 DBR ­ 096 4 6 8 12 16 24 30 36 48 96 2 3 4 6 4 6 5 6 8 8 2 2 2 2 4 4 6 6 6 12 14.80 14.80 14.80 14.80 16.30 16.30 18.00 18.00 19.55 21.00

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

ARMOURED O.F. CABLE HYBRID (FIBER/COPPER) CABLE

FEATURES

· · · Rodent & Termite proof. Resist Corrosion, mechanical & physical stresses in the cable. Perfect moisture/chemical barrier.

FEATURES

· · · · Utilize advantages of bot copper & fiber. Simplified cable installation and reduced costs Increased communication reliability through media diversity. 6/12/24/36 Fibers with a copper pari hybrid cables are available.

APPLICATION

· · · Trunk, junction networks and inter exchange links. Oil fields & Railway communications. Long haul networks (under ground).

DESCRIPTION

The cable has been designed for underground laying. It is a loose tube construction. The gel filled loose tubes are stranded around FRP Central Strength member and the cable core is flooded with flooding gel. The aramid or glass yarns put over the cable core supplement the tensile strength provided by FRP. Steel tape armouring, corrugated transversely, forms an integral bonded part of the armoured cable.

APPLICATION

· · · · Network requiring media diversity. PTT subscriber loop network. Engineering orderwire communication. As remote power feed for fiber optic links.

DESCRIPTION

The Hybrid cable shall be tailor made to suit customer requirements. The cables are designed for underground application. Copper conductors (twisted pairs, co-axial cables, power feed conductors etc.) and loose buffer tubes containing optical fibers are assembled around dielectric central strength member. Rest of the cable follows general constructional details for loose tube fiber optic cables. Both halogen ­free and standard polyethylene jackets can be provided.

MECHANICAL CHARACTERISTICS

Minimum bending radius Minimum bending radius Tensile strength 15 x cable dia. (no load) 20 x Cable dia. (Full load) 1.3 x W X 9.8 N ("W" weight of cable kg/km)

TEMPERATURE RANGE

Storage temperature Operating Temperature -20oC to +60oC -20oC to +70oC

MECHANICAL CHARACTERISTICS

Minimum bending radius Minimum bending radius Tensile strength 15 x cable dia. (no load) 20 x Cable dia. (Full load) As per requirement

TEMPERATURE RANGE

Storage temperature Operating Temperature -20oC to +60oC -20oC to +70oC

PRODUCT No.

Fiber Count

No. of LT 2 3 4 6 6 6 6

No. of SM Fibers/ LT 2 2 2 2 2 or 4 4 8

Outer dia mm

Net Wt. Kg/Km

Delivery Length (mtr) 4000 4000 3000 3000 3000 3000 3000

Drum size (flange dia. mm) 1800 1800 1800 1800 1800 1800 1800

ARM ­ 004 ARM ­ 006 ARM ­ 008 ARM ­ 012 ARM ­ 018 ARM ­ 024 ARM ­ 048

4 6 8 12 18 24 48

17.40 17.40 18.52 18.52 18.52 18.52 19.72

245.00 246.00 279.00 281.00 281.00 282.00 318.00

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

FIBER OPTIC CABLES

CHARACTERSTICS AND ADVANTAGES OF OPTICAL FIBER CABLES

CHARACTERSTICS

Low attenuation Wide bandwidth Immunity from electromagnetic interference Immunity from NEMP (INCLEAR ELECTROMAGNETIC PULSES) Non-Conductive Non-inductive

ADVANTAGES

Long repeater spacing or repeaterless networks Long transmission Capacity with simultaneous voice, data and video transmission capabilities No shielding problems, No crosstalk Ideal for high security applications

Transmitter and receiver are electrically isolated No danger of sparks from short circuits, perfect for use in hostile environments

Small Size, Small bending Space efficient, ease installation with resulting cost benefits. Utilization of existing duct systems radius and light weight

UNDERGROUND DUCT METALLIC SM OPTICAL FIBRE CABLE

PRODUCT CODE FEFS TECH. SPEC. NO.

1-Central Strength member 2-Colour coded fiber 3-Colour coded filled loses tubes 4-Filled interstices 5-Wraping tapes 6-Identification Tapes

TS - 26000

7-Swelling tapes 8-Glass yarne 9-Aluminum moisture barrier 10-Polyethylene sheath, Black 11-Sheath Marking

DESCRIPTION

Singlemode fiber, filled colour coded loose tubes, assembled around a central strength member (CSM), filled core , wrapped with dielectric and water blocking tapes, glass yarn strength members, aluminum polymer laminated tape and PE sheath, duct optical fiber cable complying with MOPTT-MAT- 1601 Specifications

APPLICATION

Singlemode optical fiber cables used in telecommunication networks or trunk or inter-exchange routes. The cables are generally hauled into ducts

DUCT METALLIC CABLE

SCC Product number 200001 200002 200003 200004 200005 200006 200007 200008 200009 Fiber Count 4 6 8 12 16 24 30 36 48 Number of loose tubes 2 3 4 6 4 6 5 6 6 Number of SM Fibers per tube 2 2 2 2 4 4 6 6 8 Approx. Outer Dia. (mm) 13.5 13.5 13.5 13.5 13.5 13.5 15 16 16 Approx. Net wt. (kgs/ km) 153 154 156 156 156 157 187 212 213 Delivery length (meters) 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 Reel Size (Flange Dia.) (mm) 1,800 1,800 1,800 1,800 1,800 1,800 1,900 2,000 2,000

CHARACTERISITICS

OPTICAL

Singlemode fiber optimized at 1,310 and/ or 1,550 nm Other fiber types / specs can be offered upon request

MECHANICAL

Pulling force (Maximum ) : 2,000 N Bending Radius (minimum) : Full load : 20 *cable diameter No load : 10 *cable diameter

ENVIRONMENTAL

Operating Temperature : -30 C° : +70 C° Storage temperature : -20 C° : +70 C° Installation temperature : -10 c° : + 60 C°

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

UNDERGROUND DUCT NON- METALLIC SM OPTICAL FIBRE CABLE

PRODUCT CODE FEFN TECH. SPEC. NO. TS - 26000

1-Central Strength member 2-Colour coded fiber 3-Colour coded filled loses tubes 4-Filled interstices 5-Wraping tapes 6-Identification Tapes

7-Swelling tapes 8-Polyethylene sheath, Black 9-Sheath marking

APPLICATION

Singlemode optical fiber cables used in telecommunication networks or trunk or inter-exchange routes. The cables are generally hauled into ducts

DESCRIPTION

Singlemode fiber, filled colour coded loose tubes, MDPE fillers, assembled around a central strength member (CSM), filled core, wrapped with dielectric and water blocking tapes, glass yarn strength members PE sheath, non-metallic OPTICAL FIBRE CABLE for underground duct application complying with MOPTT MAT - 1601 specification.

DUCT METALLIC FREE CABLE

SCC Product number 200010 200011 200012 200013 200014 200015 200016 200017 200018 Number of loose tubes 2 3 4 6 4 6 5 6 6 Number of SM Fibers per tube 2 2 2 2 4 4 6 6 8 Approx. Outer Dia. (mm) 12.0 12.0 12.0 12.0 12.0 12.0 13.6 14.6 14.6 Approx. Net wt. (kgs/ km) 124 126 126 127 127 127 155 178 179 Delivery length (meters) 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 Reel Size (Flange Dia.) (mm) 1,700 1,700 1,700 1,700 1,700 1,700 1,800 1,900 1,900

Fiber Count 4 6 8 12 16 24 30 36 48

Other fiber count cable--and delivery lengths are available on request

CHARACTERISITICS

OPTICAL

Singlemode fiber optimized at 1,310 and/ or 1,550 nm Other fiber types / specs can be offered upon request

MECHANICAL

Pulling force (Maximum ) : 2,000 N Bending Radius (minimum) : Full load : 20 *cable diameter No load : 10 *cable diameter

ENVIRONMENTAL

Operating Temperature : -30 C° : +70 C° Storage temperature : -20 C° : +70 C° Installation temperature : -10 c° : + 60 C°

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

UNDERGROUND DIRECT BURIED METALLIC SM OPTICAL FIBER CABLE

PRODUCT CODE FEFSE TECH. SPEC. NO. TS - 26000

1-Central Strength member 2-Colour coded fiber 3-Colour coded filled loses tubes 4-Filled interstices 5-Wraping tapes 6-Identification Tapes 7-Swelling tapes

8-Glass yarne 9-Aluminum moisture barrier 10-Inner Polyethylene sheath 11-Filling Compound 12-Outer polyethylene sheath, Black 13-Sheath Marking, White

APPLICATION

Singlemode optical fiber cables generally used in telecommunication networks or trunk or inter-exchange routes. The cables are used for outdoor direct burial application.

DESCRIPTION

Singlemode fiber, filled colour coded loose tubes, MDPE fillers, assembled around a central strength member (CSM), filled core, wrapped with dielectric and water blocking tapes, glass yarn strength members aluminum polymer laminated tape, PE outer and inner sheath, OPTICAL FIBER CABLE for direct burial application complying with MOPTT MAT­ 1601 Specifications

DUCT BURIED METALLIC CABLE

SCC Product number 200019 200020 200021 200022 200023 200024 200025 200026 200027 Number of loose tubes 2 3 4 6 4 6 5 6 6 Number of SM Fibers per tube 2 2 2 2 4 4 6 6 8 Approx. Outer Dia. (mm) 15.0 15.0 15.0 15.0 15.0 15.0 16.5 17.5 17.5 Approx. Net wt. (kgs/ km) 181 181 182 183 183 184 219 247 248 Delivery length (meters) 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 Reel Size (Flange Dia.) (mm) 1,900 1,900 1,900 1,900 1,900 1,900 2,000 2,100 2,100

Fiber Count 4 6 8 12 16 24 30 36 48

Other fiber count cable--and delivery lengths are available on request

CHARACTERISITICS

OPTICAL

Singlemode fiber optimized at 1,310 and/ or 1,550 nm Other fiber types / specs can be offered upon request

MECHANICAL

Pulling force (Maximum ) : 1,000 N Bending Radius (minimum) : Full load : 20 *cable diameter No load : 10 *cable diameter

ENVIRONMENTAL

Operating Temperature : -30 C° : +70 C° Storage temperature : -20 C° : +70 C° Installation temperature : -10 c° : + 60 C°

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

UNDERGROUND DIRECT BURIED NON- METALLIC SM OPTICAL FIBER CABLE

PRODUCT CODE FEFNE TECH. SPEC. NO. TS - 26000

1-Central Strength member 2-Colour coded fiber 3-Colour coded filled loses tubes 4-Filled interstices 5-Wraping tapes 6-Identification Tapes

7-Swelling tapes 8-Glass yarne 9-Inner Polyethylene sheath 10-Filling Compound 11-Outer polyethylene sheath, Black 12-Sheath Marking, White

APPLICATION

Singlemode optical fiber cables generally used in telecommunication networks or trunk or inter-exchange routes. The cables are used for outdoor direct burial application.

DESCRIPTION

Singlemode fiber, filled colour coded loose tubes, MDPE fillers, assembled around a central strength member (CSM), filled core, wrapped with dielectric and water blocking tapes, glass yarn strength members , PE outer and inner sheath, non-metallic OPTICAL FIBER CABLE for direct burial application complying with MOPTT MAT­ 1601 Specifications

DUCT BURIED METAL FREE CABLE

SCC Product number 200028 200029 200030 200031 200032 200033 200034 200035 200036 Number of loose tubes 2 3 4 6 4 6 5 6 6 Number of SM Fibers per tube 2 2 2 2 4 4 6 6 8 Approx. Outer Dia. (mm) 14.0 14.0 14.0 14.0 14.0 14.0 15.5 16.0 16.0 Approx. Net wt. (kgs/ km) 147 148 148 149 149 150 183 210 211 Delivery length (meters) 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 Reel Size (Flange Dia.) (mm) 1,800 1,800 1,800 1,800 1,800 1,800 2,000 2,000 2,000

Fiber Count 4 6 8 12 16 24 30 36 48

Other fiber count cable--and delivery lengths are available on request

CHARACTERISITICS

OPTICAL

Singlemode fiber optimized at 1,310 and/ or 1,550 nm Other fiber types / specs can be offered upon request

MECHANICAL

Pulling force (Maximum ) : 1,000 N Bending Radius (minimum) : Full load : 20 *cable diameter No load : 10 *cable diameter

ENVIRONMENTAL

Operating Temperature : -30 C° : +70 C° Storage temperature : -20 C° : +70 C° Installation temperature : -10 c° : + 60 C°

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

UNDERGROUND DIRECT BURIED ARMOURED SM OPTICAL FIBER CABLE

PRODUCT CODE FEFSDE TECH. SPEC. NO. TS - 26000

1-Central Strength member 2-Colour coded fiber 3-Colour coded filled loses tubes 4-Filled interstices 5-Wraping tapes 6-Identification Tapes

7-Swelling tapes 8-Glass yarne 9-Inner Polyethylene sheath 10-Corrugated steel tape 11-Outer polyethylene sheath, Black 12-Sheath Marking, White

APPLICATION

Singlemode optical fiber cables generally used in telecommunication networks or trunk or inter-exchange routes. The cables are used for outdoor direct burial application.

DESCRIPTION

Singlemode fiber, filled colour coded loose tubes, MDPE fillers, assembled around a central strength member (CSM), filled core, wrapped with dielectric and water blocking tapes, glass yarn strength members , PE inner sheath, Corrugated steel tape and PE outer sheath, OPTICAL FIBER CABLE for direct burial application complying with MOPTT MAT­ 1601 Specifications

DUCT BURIED ARMOURED CABLE

SCC Product number 200037 200038 200039 200040 200041 200042 200043 200044 200045 Number of loose tubes 2 3 4 6 4 6 5 6 6 Number of SM Fibers per tube 2 2 2 2 4 4 6 6 8 Approx. Outer Dia. (mm) 16.8 16.8 16.8 16.8 16.8 16.8 18.4 19.3 19.3 Approx. Net wt. (kgs/ km) 262 263 263 264 264 265 307 336 337 Delivery length (meters) 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 Reel Size (Flange Dia.) (mm) 2,000 2,000 2,000 2,000 2,000 2,000 2,200 2,200 2,200

Fiber Count 4 6 8 12 16 24 30 36 48

Other fiber count cable--and delivery lengths are available on request

CHARACTERISITICS

OPTICAL

Singlemode fiber optimized at 1,310 and/ or 1,550 nm Other fiber types / specs can be offered upon request

MECHANICAL

Pulling force (Maximum ) : 1,000 N Bending Radius (minimum) : Full load : 20 *cable diameter No load : 10 *cable diameter

ENVIRONMENTAL

Operating Temperature : -30 C° : +70 C° Storage temperature : -20 C° : +70 C° Installation temperature : -10 c° : + 60 C°

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

ACSR OVERHEAD CONDUCTOR Aluminum conductor steel reinforced (ACSR)

Applications

ACSR is being universally used for the transmission of electric power over long distances. It is also used as a messenger to support overhead electrical cables.

Features

Ideal combination of conductivity and strength to permit longest possible spans. Minimum sag between supports with fewer towers required.

Description

Concentric lay stranded conductors made from round aluminium wires and round zinc-coated steel (*) core wires constructed in accordance with ASTM 8232 (**). Wide variety of sizes available in long lengths to suit both electrical and mechanical design requirements. Good corrosion resistance

Construction

To order

Order by catalogue number, code word, quantity required. Example SXX1-A3X code word 'Minorca", 14,000 m. * Aluminium-clad steel core wire per ASTM 8502 is also available. ** Also available in accordance with IEC209, 8S215 part 2 and DIN 48204.

Central core

A zinc-coated solid steel core wire according to ASTM 8498 or a zinc-coated stranded steel core according to ASTM B500.

Outer layers

Aluminium wires 1350-H19 EC grade to ASTM 8230 concentrically laid up over the central core.

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

Aluminum conductor steel reinforced (ACSR) Continued

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

Aluminum clad steel reinforced (ACSR/ AW )

Applications

ACSR / AW is being universally used for the transmission of electric power over long distances. It is also used as a messenger to support overhead electrical cables.

Features Description

Concentric lay stranded conductors made from round aluminum wires and round aluminum-clad steel core wires constructed in accordance with ASTM B549. ACSR I AW incorporates aluminum clad steel wires ( AW wires) combining high tensile strength of steel with high conductivity and high corrosion resistance (nongalvanic corrosion between aluminum wire and core wire). This conductor offers reduced power loss and makes economical overhead transmission system .

Construction

Central core

A round aluminum-clad steel core according to ASTM B502.

To order

Order by catalogue number, code word, quantity required. Example VXX1-P4X code word 'Penguin/ AW 14,000 m

Outer layers

Aluminum wires 135O-H19 EC grade to ASTM B230 concentrically laid up over the central core

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

Aluminum clad steel reinforced (ACSR/ AW ) Continued

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

ACSR OVERHEAD CONDUCTOR Aluminum conductor steel reinforced (ACSR)

Applications

ACSR is being universally used for the transmission of electric power over long distances. It is also used as a messenger to support overhead electrical cables.

Features

Ideal combination of conductivity and strength to permit longest possible spans. Minimum sag between supports with fewer towers required.

Description

Concentric lay stranded conductors made from round aluminium wires and round zinc-coated steel (*) core wires constructed in accordance with ASTM 8232 (**). Wide variety of sizes available in long lengths to suit both electrical and mechanical design requirements. Good corrosion resistance

Construction

To order

Order by catalogue number, code word, quantity required. Example SXX1-A3X code word 'Minorca", 14,000 m. * Aluminium-clad steel core wire per ASTM 8502 is also available. ** Also available in accordance with IEC209, 8S215 part 2 and DIN 48204.

Central core

A zinc-coated solid steel core wire according to ASTM 8498 or a zinc-coated stranded steel core according to ASTM B500.

Outer layers

Aluminium wires 1350-H19 EC grade to ASTM 8230 concentrically laid up over the central core.

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

Aluminum conductor steel reinforced (ACSR) Continued

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

Aluminum clad steel reinforced (ACSR/ AW )

Applications

ACSR / AW is being universally used for the transmission of electric power over long distances. It is also used as a messenger to support overhead electrical cables.

Features Description

Concentric lay stranded conductors made from round aluminum wires and round aluminum-clad steel core wires constructed in accordance with ASTM B549. ACSR I AW incorporates aluminum clad steel wires ( AW wires) combining high tensile strength of steel with high conductivity and high corrosion resistance (nongalvanic corrosion between aluminum wire and core wire). This conductor offers reduced power loss and makes economical overhead transmission system .

Construction

Central core

A round aluminum-clad steel core according to ASTM B502.

To order

Order by catalogue number, code word, quantity required. Example VXX1-P4X code word 'Penguin/ AW 14,000 m

Outer layers

Aluminum wires 135O-H19 EC grade to ASTM B230 concentrically laid up over the central core

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

WIRES AND CABLES

Aluminum clad steel reinforced (ACSR/ AW ) Continued

Electrolines Est.

P. O. Box. 942 Yanbu Saudi Arabia Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967

Information

DIVIDERS - SESCO (Page 26)

29 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

2898