Read untitled text version

Electrical Troubleshooting Kit

For electrical troubleshooting look no further than this combination kit from Farnell.

The kit comprises three key products for fault finding and testing in electrical systems including measurement of electrical parameters, insulation testing and non-contact temperature measurement. The kit comprises of:

Fluke 1587 Fluke LVD1

SPECIAL OFFER

· Fluke 1587

Fully featured Digital Multimeter combined with multi range insulation tester

· Fluke 62

Multipurpose non-contact IR thermometer

· LVD1

Flashlight with exclusive dualsensitivity voltage detector

Fluke 62

· Toolbag

Including application information CD

Model

Order Code

Price Each

Fluke Electrical Troubleshooting Kit

123-057538

£399.00

Industrial Troubleshooting Kit

The Fluke industrial troubleshooting kit from Farnell is ideal for a variety of industrial measurement problems

The kit comprises three key products for diagnostics in an industrial environment, including a wide range of electrical parameters with the ability to measure accurately on variable speed drives also noncontact temperature measurement. The kit comprises of:

Fluke 87V Fluke LVD1

SPECIAL OFFER

· Fluke 87V

Fully featured DMM fully loaded with measurement functions and troubleshooting features with high resolution and accuracy. Ideal for solving problems on motor drives.

· Fluke 62

Multipurpose non-contact IR thermometer

· LVD1

Flashlight with exclusive dualsensitivity voltage detector

Fluke 62

· Toolbag

Including application information CD

Model

Order Code

Price Each

Fluke Industrial Troubleshooting Kit

123-057438

£319.00

Prices exclude VAT 20MHz Function Generator

TG120 The TG120 is a low-cost dial-set function generator which uses a new highly integrated design to achieve an upper frequency of 20MHz. Ì Ì Ì Ì Ì Ì Ì

FREQUENCY Frequency range: Vernier Range: Vernier Accuracy: SWEEP MODE (EXTERNAL) Sweep Range: Input Sensitivity

Ì 0.03Hz to 3MHz frequency range Ì Simultaneous digital display of frequency and level Ì High accuracy frequency readout with fast update Ì 2mV to 20V pk-pk output fom 50 or 600

FREQUENCY Frequency Range Vernier Range External Sweep Frequency Display

Ì Level display compensated for attenuator setting Ì 1000:1 frequency change by vernier or by voltage applied to the external sweep input Ì Variable symmetry at constant frequency Ì Display annunciators including clipping indicator

Low cost 20MHz function generator 0.2Hz to 20MHz frequency range 10mV to 20V peak-to-peak from 50W Separate TTL/CMOS output DC offset control with zero detent Variable symmetry control External sweep input

0.03Hz to 3MHz in 7 overlapping decade ranges with vernier control 1000:1 on each range 1000:1 linearly with applied voltage Auto-ranging reciprocal measurement giving 4 digit resolution. Accuracy ±1 digit down to 2Hz, ± 1% below 2Hz

0.2Hz to 20MHz in 8 overlapping decade ranges with fine adjustment by a vernier >10:1 on each range Typically ±5% of full range Typically 20:1 Typically 0 to 2V for 10:1 sweep

WAVEFORM PERFORMANCE Sine Distortion Typically 2% on 200, 2k and 20k ranges Amplitude Flatness: ±0.2dB to 200kHz; ±2dB to 20MHz Triangle Linearity: Typically 99% on kHz ranges Square Wave Rise/Fall <22ns Symmetry Range: Typically variable from 1:6 to 6:1 up to 500kHz OUTPUTS 50 26dB vernier control within each range 3 ranges 0dB Range: 1V to 20V peak-to-peak (0.5V to 10V into 50) -20dB Range: 100mV to 2V peak-to-peak (50mV to 1V into 50) -40dB Range: 10mV to 0.2V peak-to-peak (5mV to 0.1V into 50) DC Offset Range: ±10V from 50 TTL/CMOS Output: Capable of driving 4 standard TTL loads GENERAL Power: 230V or 115V ±14%, 30VA max. Installation Category II Safety and EMC: Complies with EN61010-1, EN55011 and EN50082-1

222581

Mftrs. List No. TG120 Standard Calibration UKAS Calibration

Order Code 316-848738 S N

1+ 203.00

Price Each 5+ 182.70 Price Each 71.01 97.78

SWEEP External Sweep Linear control by external voltage, 1000:1 maximum on each range WAVEFORMS (Specifications apply for the top decade of each frequency range) Sine Distortion Less than 0.5% on 300Hz, 3kHz and 30kHz ranges; less than 1% on 3Hz, 30Hz and 300kHz ranges; all harmonics >25dB below fundamental on 3MHz range Amplitude Flatness ± 0.2dB to 200kHz; 2dB to 3MHz Triangle Linearity Better than 99% to 200kHz Squarewave Rise & Fall Times <100ns Mark-Space Ratio 1:1 ±1% to 100kHz DC Range ±10V (unterminated) Symmetry Symmetry Range Variable typically between 1:9 and 9:1 (on top decade of each range), frequency divided by 10 when symmetry is selected OUTPUTS Output Impedance 50, alternative 600 output available Amplitude 2mV to 20V peak-peak (open circuit) in four ranges with 20dB control within each DC Offest Range ±10V (offset plus signal limited to ±10V), Accuracy ±(2% + 1 digit) Amplitude Display 3 digit display showing pk-pk or rms amplitude or dc offset, compensated for attenuator setting. Accuracy ±5% of range Aux Output 0 to 5V TTL/CMOS levels (2 TTL loads) GENERAL Power Requirement 230V or 115V ±14%, 50/60Hz, by internal adjustment. Installation Category II Safety and EMC Complies with EN61010-1 and EN61326

338041

10+ 177.63

Mftrs. List No. TG315

Order Code 471-849538 S N

1+ 203.00

36

Standard Calibration Charge UKAS Calibration Charge

Price Each 3+ 182.70 Price Each 34.10 56.76

5+ 177.63

TG210 Function Generator

2MHz External/Internal Sweep A quality instrument which can generate a variety of precision waveforms over a wide range of frequencies and feature variable d.c. offset. Variable symmetry and sweep input Ì 0.002Hz to 2MHz frequency range in 7 decades Ì 20V pk-pk output from 50 or 600, plus TTL/CMOS output 1000:1 frequency change by vernier or external voltage to sweep input Variable symmetry at constant frequency Variable dc offset with zero detent Sturdy ABS case with multiposition hand/stand

Sine,Square,Triangle 1000:1 on each range Typically ±5% of full scale 0 to 3V for 1000:1 sweep Zin = 10 <0.5% on 200, 2K and 20K ranges <1% on the 2, 20, 200K ranges >99% to 200kHz Rise and fall times <100nS Mark space ratio 1:1 ±1% to 100kHz Variable 1:9 to 9:1 on top decade range ±10V (0dB) or ±1V (-20dB attenuator) 0 to +5V for driving CMOS and TTL loads

222526.409429

3MHz Function Generator with 120MHz Counter

TG320 Ì Function generator specifications as TG315 Ì 71/2 digit external frequency counter, 5Hz to 120MHz Ì Recoprocal counting method for high resolution Ì 50mV sensitivity up to maximum frequency

H=88, W=260, D=235, Weight = 1.9kg

Ì Ì Ì Ì

Waveforms Vernier range Vernier accuracy Sweep input Sine distortion Triangle linearity Square wave Symmetry control D.C. offset Auxillary output

The TG320 has the same features and specifications as the TG315, but with the addition of a wide range frequency counter for external signals. The full width of the display is used to provide a 71/2 digit frequency readout, and a reciprocal counting technique is employed to achieve high resolution at all frequencies.

EXTERNAL COUNTER Frequency Range 5Hz to >20MHz (range 1) and <20MHz to >120MHz (range 2) Input Sensitivity 50mV rms (sinewave) Resolution 6 digits at 0.5s gate time, 7 digits at 5s gate time Timebase Accuracy <±10ppm initial error (trimmable through front panel), ±5 ppm/year ageing rate; tempco typically less than 0.5pm/°C Counter Display In external counter mode, a supressed digit between the two displays is enabled creating a single 8 digit display. Annunciators for Hz, kHz and MHz

338172

Mftrs. List No. TG210 Standard Calibration UKAS Calibration

Order Code 184-37838 S N

1+ 162.00

Price Each 5+ 145.80 Price Each 34.10 56.76

10+ 141.75

Mftrs. List No. TG320

Order Code 471-850138 S N

1+ 222.34

Standard Calibration Charge UKAS Calibration Charge

Price Each 3+ 210.60 Price Each 58.87 86.25

5+ 204.75

3MHz Function Generator with Counter, Sweep and AM 3MHz Function Generator with Dual Digital Displays

TG315 The TG315 is a low-cost 3MHz function generator which incorporates an LCD display that gives a simultaneous readout of frequency and amplitude (or DC offset). Wide frequency range is matched by very high waveform quality at all frequencies and amplitudes. The digital display provides fast update even at low frequencies. TG330 Ì Functon generator specifications as TG315 Ì Frequency counter specifications as TG320 Ì Internal sweep generator with lin or log sweep Ì Amplitude modulation, internal or external source

H=88, W=260, D=235mm, Weight = 1.9kg

H=88, W=260, D=235mm, Weight = 1.9kg

Order before 8pm for FREE next day delivery

Valid until 28th February 2007

The TG330 has the same features and specifications as the TG320, but with the addition of an internal sweep generator and AM capability.

SWEEP Internal Sweep Sweep Out Sweep Width Sweep Rate External Sweep Linear or logarithmic; Start and Stop frequencies displayed by button press Control voltage available as an output Up to 1000:1 within each range Adjustable from typically 20ms to 20s Linear control by external voltage Frequency All waveforms are derived from a crystal clock using DDS Frequency Range 1mHz - 20MHz (except triangle) Resolution 6 digits or 1mHz Accuracy ±10ppm for 1 year, 18°C to 28°C Temp Coefficient Typically <1ppm/°C outside 18°C to 28°C Waveforms Range Resolution Output Level Sinewave 1mHz - 20MHz 6 digits or 1mHz 5mV - 20V pk-pk from 50 Squarewave 1mHz - 20MHz 6 digits or 1mHz 5mV - 20V pk-pk from 50 Triangle 1mHz - 1MHz 6 digits or 1mHz 5mV - 20V pk-pk from 50 Pulse 1mHz - 20MHz 6 digits or 1mHz 5mV - 20V pk-pk from 50 Modulation Modes Continuous Continuous cycles of the selected waveform are output at the selected frequency Gated Non phase-coherent signal keying, output only ON when gate signal is HIGH Carrier 0.1Hz to 20MHz (all waveforms) Trigger Rep. Rate dc to 100kHz external, dc to 5kHz internal Gate Source MAN TRIG key, internal gate generator, TRIG/GATE input, remote interface Sweep Modes: Linear or logarithmic; single or continuous. Carrier All waveforms Sweep Width & Time 0.2Hz - 20MHz (50ms - 999s) Trigger Source free run or MAN TRIG key, TRIG/GATE input, remote interface Amplitude Modulation Carrier 1mHz to 20MHz (all waveforms) Modulation Source VCA IN socket Frequency Shift Keying Phase-coherent switching between 2 frequencies at a rate defined by the switch source Carrier 1Hz to 20MHz (all waveforms) Switch Rep. Rate dc to 1MHz external, dc to 5kHz internal Switch Signal Source MAN TRIG key, internal gate generator, TRIG/GATE input, remote interface Tone Tone is output only when the trigger signal is HIGH Carrier All waveforms Frequency List Up to 16 frequencies between 1Hz and 20MHz Switching Source MAN TRIG key, internal trigger generator, TRIG/GATE input, remote interface Internal Trigger/Gate Period 0.2ms to 999s (resolution 0.2ms) Waveform Squarewave (1:1 duty cycle) Main Output Output Impedance 50 or 600 switchable Amplitude 5mV to 20V pk-pk open circuit Accuracy ±3% ±1mV Flatness ±0.2dB to 500kHz; ±2dB to 20MHz DC Offset ±10V from 50/600 Resolution 3 digits for both amplitude and offset Auxilliary Output Multi-function output user definable to be any of the following: Waveform Sync outputs a 50% duty cycle squarewave at the main waveform frequency Trigger Out outputs a replica of the current trigger signal Sweep Sync outputs a trigger signal or marker at the start of a sweep Inputs Ext. Trigger / Gate VCA IN Interfaces RS232 USB General Display Data Entry Memory Power Requirements Operating Conditions max. input ±10V. Impedance: 10k dc to 100kHz, 2.5V. Impedance approx. 6k variable baud to 19200, 9-pin D connector Standard USB 1.1 connection 20 x 4 alphanumeric LCD keyboard, number keys, rotary control up to 9 complete instrument setups can be stored in battery-backed memory 100V, 110-120V or 220-240V, 50/60Hz, 40VA max +5°C to 40°C, 20%-80% RH

417469

AMPLITUDE MODULATION Modulation Depth Variable 0 to 100% typical Modulation Frequency 400Hz internal. DC to 20kHz external

338173

Mftrs. List No. TG330

Order Code 471-851338 S N

1+ 269.00

Standard Calibration Charge UKAS Calibration Charge

Price Each 3+ 252.94 Price Each 58.87 86.25

5+ 242.10

TG550 5MHz Function Generator with Sweep

External Counter and Dual Display The TG550 can generate a variety of precision waveforms over a wide range of frequencies from mHz to MHz. Dual digital display shows frequency and level of frequency stability Ì 0.005Hz to 5MHz frequency range Ì Simultaneous display of frequency and amplitude Ì Frequency locking for crystal controlled stability Ì Precision internal linear or logarithmic sweep Ì External frequency counter with a 7 digit resolution

Waveforms Frequency Range Vernier Range Sine Distortion Triangle linearity Square wave Symmetry control Sweep rate AM DC offset Auxiliary output Meter accuracy Frequency Locking External Frequency Resolution General Input Voltage Operating Temperature Weight Safety ENC

Ì High waveform quality at all frequencies and levels Ì 20V pK-pK from 50 or 600, plus TTL/CMOS output Ì 1000:1 frequency change by vernier or sweep voltage Ì Internal or external amplitude modulation up to 100%

Sine, Square, Triangle 0.005Hz to 5MHz 1000: <0.5% on 500, 5K and 50K ranges; <1% on 5, 50 and 500K ranges All harmonics >25dB below fundamental on 5M range Better than 99% to 200kHz Rise/Fall <45ns, 1:1 ±1% to 100kHz Variable 1:9 to 9:1 20ms to 20s, linear or logarithmic 0 to 100%, 400Hz internal, DC to 100KHz external ±10V unterminated 0 to 5V signal, frequency/symmetry/phase as main output Frequency ±1 digit 0.2Hz to 5MHz, 1% of range below 0.2Hz Amplitude typically ±5%. Offset typically ±2% <0.01% of displayed value. 0.5Hz to 5MHz 5Hz to 20MHz, sensitivity 50mV, accuracy 10ppm ±1 digit 6 digits in 0.5 seconds, 7 digits in 5 seconds 230V or 115V nominal 50/60Hz by internal adjustment +5°C to + 50°C, 20%-80% RH Complies with EN61010-1 Complies with EN55081-1, EN50082-1

222555

37

Mftrs. List No. TG2000

Order Code 979-896038 S N

1+ 499.00

Standard Calibration UKAS Calibration

Price Each 3+ 465.00 Price Each 55.16 74.22

10+ 432.67

Mftrs. List No. TG550

Order Code 493-27238 S N

1+ 356.00

Standard Calibration Charge UKAS Calibration Charge

Price Each 3+ 320.40 Price Each 60.98 92.57

5+ 311.50

TG1010A Function Generators

10MHz Programmable DDS The TG1010 generates high quality sine, square and pulse waveforms over the full frequency range of 0.1MHz to 10MHz with 7 digit resolution and accuracy better than 10ppm Ì Eight standard waveforms, plus multiple ``complex'' waveforms, true arbitrary waveforms and noise Ì Powerful modulation modes including Sweep, AM Gating, Trigger/Burst, FSK and Hop Ì Ì Ì Ì Ì Ì Variable symmetry, variable start/stop phase 20V pK-pK output 50 or 600 (switchable) Storage for five Arbitrary Waveforms (1024 x 10 bits) RS-232 interface as standard Housed in a half-rack 3U size metal case Supplied with mains lead and manuals

Frequency Range 0.1MHz to 10MHz 0.1MHz to 10MHz 0.1MHz to 500kHz 0.1MHz to 50kHz 0.1MHz to 10MHz 0.1MHz to 30kHz Output Level 6mV to 20V pK-pK open circuit 5mV to 20V pK-pK open circuit 6mV to 20V pK-pK open circuit 3mV to 10V pK-pK open circuit 2.5mV to 10V pK-pK open circuit 6mV to 20V pK-pK open circuit

20 MHz DDS Function Generator

TGA2000 Direct digital synthesis (DDS) is a technique for generating waveforms digitally using a phase accumulator, a look-up tableand a DAC. The accuracy and stability of the resulting waveforms is related to that of the crystal master clock. The DDS generator offers not only exceptional accuracy and stability but also high spectral purity, low phase noise and excellent frequency agility.

W=260 H=88 D=235mm. Weight = 2kg

Ì Ì Ì Ì Ì Ì Ì Ì Ì

0.001Hz to 20MHz frequency range, 6 digits or 1mHz setting resolution. 1ppm stability and better than 10 ppm absolute accuracy for one year. Sine, square, triangle, positive pulse and negative pulse waveforms. Low distortion, high spectral purity sine waves. Internal sweep, linear or logarithmic, phase continuous, 0.1Hz to 20MHz in one range. Modulations modes of gated, AM, FSK and tone switching; built-in trigger generator. 5mV to 20V pk-pk output from 50 or 600; plus fixed level auxiliary output. Storage for up to nine complete instrument set-ups in non-volatile memory. Fully programmable via RS-232 or USB interfaces.

Waveform Sinewave Squarewave Triangular waveform Positive and negative ramp Positive and negative pulse Multi-level squarewave Output (BNC) Output Impedance Amplitude Accuracy DC offset Resolution General

50 or 600 switchable 5mV to 20V pK-pK (2.5MV to 10V pK-pK into 50/600) ±3% ±1mV at 1kHz into 50/600 ±10V from 50/600 signal peak limited to ±10V from 50/600 3 digits or 1mV

08701 200 200

Fax: 08701 200 201

www.farnellinone.co.uk

Prices exclude VAT

Display Data Entry Power Supply Weight Operating Temperature Safety EMC 20 character x 4 row alphanumeric LCD Keyboard selection, numeric keys, rotary control 115Vac ±14% or 230Vac ±14% 50/60Hz 4.1kg +5°C to + 40°C, 20%-80% RH Complies with EN61010-1 Complies with EN55081-1, EN50082-1

222554

Mftrs. List No. TG1010A

Order Code 493-28438 S N

1+ 695.00

Standard Calibration UKAS Calibration

Price Each 5+ 648.33 Price Each 105.10 124.06

10+ 620.54

40 MHz Function Generator

TGA12101 Ì Universal signal source architecture Ì Up to 100MHz sampling frequency Ì Sinewaves to 40MHz, Squarewaves to 50MHz Ì 12 bit vertical resolution Ì Up to 10 digits frequency resolution Ì 656MB memory 500 waveforms and 500 set-up memory Ì Waveform linking, looping and sequencing Ì True variable clock architecture Ì USB, RS232 and GPIB interfaces

H=130, W=212, D=335mm Weight = 4.1kg Sin, Cos, Haversin, Havercos Square Triangle, Ramps and Sin(x)/x Pulse and pulse train Arbirary waveforms Waveform sequencing Noise Output filter Inputs Interface

Range: 0.1mHz - 40MHz Resolution: 0.1mHz or 10 digits Range: 1mHz - 50MHz Resolution: 1mHz (4 digits) Range: 0.1mHz - 500kHz Resolution: 0.1mHz or 10 digits Range: 40ns to 100s Resolution: 4 digit Up to 500 user defined waveforms Up to 1024 waveforms may be linked 35 bit linear feedback 40MHz Elliptic, 20MHz Bessel or none Trig, Modulation, Sum, Hold, IN/Out, Arb Clock RS232, USB and GPIB

382010

Arbitrary Waveforms Output Filter 10MHz Elliptic, 10MHz Bezel, or None Basic arbitrary waveform creation and editing tools are built into the instrument. Arbitrary waveforms can be built up using insertion of standard waveforms between points, point by point value setting, and straight line drawing between points. Windows based arbitrary waveform editing software for Windows 98/95/3.1 is supplied. The graphical environment uses drawing tools, mathematical expressions and insertion from waveform libraries to rapidly create or modify waveforms which are then downloaded using RS-232 or GPIB interfaces. Specifications Main Output Amplitude Range 5mV to 20V pk-pk from 50W or 600W Amplitude Accuracy ±2% ±1mV at 1kHz, terminated or unterminated DC Offset ±10V Resolution 3 digits or 1mV for Amplitude and Offset Modulation Sweep 30ms to 999s phase continuous, Lin or Log, Marker Amplitude Modulation 0 to 100%, External only, DC to 1MHz Triggered Burst 1 to 1048575 cycles, dc to 50kHz internal, dc to 1MHz external Gated DC to 50kHz internal, DC to 1MHz external Tone 16 frequencies can be set up. Switching from external trigger Signal Summing Signal can be summed with the output of an external generator Inputs/Outputs Trigger in, VCA in, Sum in, Hold, Ref Clock In/Out, Sync Out, Cursor/Marker Out Inter-channel operation Phase locking Two or more channels can be phase locked with independent phase control to a resolution of 0.1 degrees Modulation Channels can be used to modulate other channels AM or SCM or all channels can be modulated from external input Summing Each channel can be analogue summed into the next channel. Any channel(s) can be summed with the SUM input Triggering Any channel can be triggered from the previous or next channel Interfaces RS-232 Variable Baud rate, 9600 maximum GPIB Conforming to IEEE-488.1 and IEEE-488.2 Software Waveform Manager Plus software supplied on disk. Windows based program that provides full waveform creation, editing, management and transfer. Drawing tools, equation editor, waveform libraries. Built-in uploader for Tektronix DSOs. General Display Alpha-numeric LCD, 4 rows of 20 characters Data Entry Via Spin-wheel or Keyboard Stored Settings Up to 9 complete instrument set-ups can be stored Power 230V or 115V nominal 50/60Hz, internally adjustable Safety Complies with EN61010-1 EMC Complies with EN50081-1, EN40082-1

230694

38

Mftrs. List No. TGA12101

Order Code 847-397838

1+ 1599.00

Price Each 3+ 1507.14

5+ 1460.00

Mftrs. List No. TGA1241 TGA1242 TGA1244

Order Code 351-087638 351-088838 351-089038

1+ 1117.00 2035.00 3055.00

Price Each 3+ 977.38 1780.63 2673.13 S N

Standard Calibration UKAS Calibration

5+ 938.28 1709.40 2566.20 Price Each 105.10 124.06

Arbitrary Generators

TGA1240 Series The TGA1240 series includes single channel, two channel and four channel generators. The single channel TGA1241 is housed in a half rack width case. The two channel TGA1242 and four channel TGA1244 are housed in a wider case, as illustrated. The following specifications apply to each channel. Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì One, two or four independent waveform channels 40MHz clock speed and 12-bit vertical resolution Sinewaves and squarewaves up to 16MHz 64K points horizontal resolution per channel Interchannel triggering, summing and phase control Complex waveform sequencing and looping capability Storage for 100 waveforms and 9 set-ups Sophisticated waveform creation/editing tools built-in Windows based software supplied for waveform creation and editing Multiple ``standard'' waveforms including sine, square, triangle, haversine, ramp, pulse and sin(x)/x Pulse train pattern generation for up to 10 pulses Wide range sweep, AM, tone switching, signal summing Tone switching facilitates precision DTMF generation Built-in trigger generator, gated & triggered burst modes Fully interfaceable via RSS-232 and GPIB (IEEE-488.2)

0.0001Hz to 16MHz 0.001Hz to 16MHz 0.0001Hz to >100kHz 0.0001Hz to >100kHz 0.0001Hz to >100kHz 0.01Hz to 10MHz

Arbitrary Function Generator

FGA2030 A 20MHz, fully featured sweep and 12-bit arbitrary function generator. The unit is supplied with an RS-232 interface and WaveGen PC software, a highly sophisticated waveform generation package which can generate a waveform by freehand drawing, equation entry and form standard waveform functions. The waveforms can also be modulated in a number of formats. Complex waveforms can also be generated with the macro generation tools.

H=74, W=206, D=150mm

General Features: Ì 16x 2digit LCD with backlight Ì 12-bit vertical resolution Ì 256K waveform memory Ì Compact design with bench Ì 30MS/s sampling rate stand/carry handle Function Generator Features: Ì 0.2Hz to 20MHz frequency range Ì Internal and External sweep (Linear or Log) Ì SINE, TRIANGLE, and SQUARE Ì AM and FM modulation with percentage control Arbitrary Generator Features: Ì 0.4S/s to 30MS/s sampling rate Ì 8x 32K non-volatile memory Ì Single, multiple or continuous

DC Offset Range Resolution Accuracy Amplitude Range Resolution Symmetry ± 10V 100mV ± 10% of setting ± 1 step 1V to 20V pk-pk 100mV

Ì DC offset with amplitude and symmetry control Ì Frequency lock mode Ì 0 to 20 output TTL/CMOS Ì Output attenuator (-20dB/-40dB) Ì 14 setup memories Ì 10MHz bessel filter Ì 12-bit resolution Ì External triggering input and output

Standard Waveforms Sinewave Squarewave Triangle Wave Positive/Negative ramp Sine (x)/x Pulse and Pulse Train

THD<0.1% to 100kHz Rise/fall times <25ns Linearity better than 0.1% to 30kHz Linearity better than 0.1% to 30kHz Linearity better than 0.1% to 30kHz Trains of up to 10 pulses can be defined with independent width, delay and level. Cosine, Haversine and Havercosine waveforms are also available Arbitrary Waveforms Up to 100 user defined waveforms may be stored in RAM. Arbitrary waveforms can be defined by front panel editing controls or by downloading of waveform data via digital interfaces. Up to 4 waveforms may be linked. Each waveform can have a loop count of up to 32768. A sequence of waveforms can be looped up to 1048575 times or run continuously. Memory Size 64k points Vertical Resolution 12 bits (4096 points maximum) Sample Clock Range 0.1Hz to 40MHz Resolution/Accuracy 4 digits/±1 digit

Range Resolution Accuracy Standard Functions SINE TRIANGLE SQUARE

15:85 to 85:15 (to 1MHz) 1% ± 1 step 2% max. Distortion 99% Typical Linearity <25ns Rise/Fall Time

Order before 8pm for FREE next day delivery

Valid until 28th February 2007

248868

Technical Data Sweep/Mode Depth and MOD freq. Carrier BW EXT sensitivity Deviation, MOD freq. SFG-2004 SFG-2010 Amplitude modulation Frequency modulation Frequency counter SFG-2110 Lin./Log selector 0 - 100%; 400Hz (INT) DC - 1MHz (EXT) 100Hz - 5MHz (-3dB) <10Vpp for 100% mod. 0-±5%; 400Hz(INT), 1kHz (EXT) <10Vpp for 10% mod. 5Hz - 150MHz ±20ppm ±1 count ±20ppm 10nHz to 0.1Hz

381951.382005

Mftrs. List No. FGA2030 Standard Calibration Charge UKAS Calibration Charge

Price Each Order Code 428-349138 S N 1+ 559.00 3+ 549.00 Price Each 86.25 118.84

Pulse Generator

TGP110

Ì 0.1Hz to 10MHz frequency range Ì 50ns minimum pulse width Ì Fully variable pulse delay and double pulse modes Ì Squarewave, double pulse and delayed pulse modes Ì Free-run, gated and trigger modes Ì 50 output, variable 0.1V to 10V, TTL and sync. output Ì Overlap indicators to give warning of illegal setting conditions Ì Large diameter vernier controls for ease of setting

Period, pulse width delay Rise fall time 10ns into 50, Load 15ns max. Aberration <5% for output set at >20% of max into 50 Timing >20ns before TTL/50 output transition Duration 30ns General Power 230V ac or 115V ac ±14% (select by link) Operating Temperature +5°C to 40°C, 20-80% RH Safety EN61010-1 EMC EN55011, EN50082-1

222483

EXT sensitivity Range Accuracy Time base Resolution

Description 4MHz 10MHz 10MHz+sweep

Mftrs. List No. SFG-2004 SFG-2010 SFG-2110

Order Code 855-4854 855-4862 855-4870

Price Each 1+ 3+ 185.54 175.51 265.77 250.73 299.87 285.83

H = 140, W = 220, D = 230 Weight = 1.6 Kg Period, pulse width delay Period 100ns to 10s (0.1Hz to 10MHz) Pulse width 50ns to 5s Delay 50ns to 5s

2MHz Function Generator with LED Display

GFG-8020H A low cost function generator with many features found on much more expensive units. The units have a LED display and integral bench stand/carry handle. Supplied with BNC to 2x croc. clip lead.

Input Gate/Trig Frequency range dc to 10MHz Signal range between 2V and 5V peak Min. pulse width >30ns Input impedance typically 10K Outputs 50 Amplitude 2 switch settings 0.1V-1.0V, 1V-10V

Mftrs. List. No. TGP110 Standard Calibration UKAS Calibration

Order Code 892-78638 S N

1+ 229.00

Price Each 3+ 5+ 206.10 200.38 Price Each 86.25 136.70

Ì Large 4 segment LED display Ì 0.2Hz to 2MHz frequency range in 7 ranges Ì Sine, Triangle, Square, TTL Pulse and CMOS output Ì Coarse and fine tuning Ì Built-in 4 digit counter (Internal only)

Main Output Amplitude Impedance Attenuator DC Offset Range Accuracy Distortion Sine Wave Square Triangle Linearity TTL Output Rise/Fall Time Level Up to 20V p-p 50 -20dB From -10V to +10V ±5% + 1Hz <1% <2% (<30ns rise/fall) 98% <30ns >3Vp-p

Ì Two-step attenuator plus variable control Ì Variable DC offset Ì VCF (Voltage Controlled Frequency) input function Ì Output overload protection

<120ns 4V to 14.5Vp-p adjustable 0V to 10V 10k Internal 0.2Hz to 2MHz ±Time Base Accuracy±1 Count 0.1Hz, 1Hz, 10Hz, 100Hz, 1kHz <25ms Vrms 230x95x280mm

339500.267581

Function Generators

CMOS Output Rise/Fall Time Level VCF Input Voltage Impedance Frequency Counter Mode Range Accuracy Resolution Sensitivity Dimensions (WxHxD)

39

Description 2MHz Function Generator Standard Calibration Charge UKAS Calibration Charge

Model: SFG-2000 Series Ì Frequency range SFG-2004: 0.1Hz - 7MHz Ì Frequency range SFG-2010/SFG-2110: 0.1Hz - 10MHz Ì High frquency accuracy and stability: ±20ppm Ì Maximum frequency resolution: 100mHz Ì Low distortion sine wave: -55dBc, 0.1Hz-200kHz Ì Built-in 6 digit 150MHz/high resolution counter Ì Front panel setting save/recall with 10 groups of setting memories SFG-2110 extra features Ì INT/EXT AM/FM modulation Ì LIN/LOG sweep mode

SFG-2004 Freq range (Sine, square) Freq range (Triangle) Resolution Accuracy Display Sine wave Technical Data SFG-2010 Main 4MHz 10MHz SFG-2110 10MHz 0.1Hz - 1MHz 0.1Hz ±20ppm 9 digits LED display -55dBc, 0.1Hz-200kHz; -40dBc, 0.2MHz-4MHz -30dBc, 4MHz-10MHz >98%, 0.1Hz - 100kHz ±1% period +4ns to 0.1 -100kHz 4Vpp ±1Vpp - 14.5Vpp ±0.5Vpp >3Vpp; Fan out; TTL load AC115V, 230V ±15%, 50/60Hz 107 x 266 x 293mm 3.1kg Sweep operation 100:1 ratio adjustable 0.5 to 30sec adjustable

Order Code 491-169638 S N

1+ 135.00

Price Each 3+ 129.00 Price Each 34.10 56.76

10+ 125.00

Audio Generator

Minirator MR1 Offering the full audio frequencies from 20Hz to 20kHz in 3rd octave steps, the MRI can generate sweep signals, sine wave, square wave, white noise, pink noise and polarity via a balanced or unbalanced connectors. Sweep speeds from 0.05 to 5 seconds per step. Ideal for checking most pro audio equipment, including PA systems and studio equipment. Ì Ì Ì Ì Ì Ì Ì Low distortion sine waves Square waves Frequency sweep, 7 selectable speeds Wide level range: -76dBu to 6dBu White and pink noise Polarity test signal Retractable balanced XLR output and unbalanced phono output

Output impedance 200R

385796

Output levels

Triangle wave Square wave CMOS output TTL output Power Dimensions (WxHxD) Weight Sweep/Rate Sweep/Time

-76 dBu to 6dBu in 2dB steps -78 dBv to 4dBv in 2dB steps 0.13 mV to 1.6V in 41 steps

Description Audio Generator Carry Case

Mftrs. List No. MR1 MR1 POUCH

Order Code 453-53538 850-857738

Price Each 1+ 5+ 126.37 122.76 20.01 19.44

08701 200 200

Fax: 08701 200 201

www.farnellinone.co.uk

Prices exclude VAT EL Series Bench Power Supplies

EL Series Single, Dual & Triple 0 - 30V, 0 - 1A 0 - 18V, 0 - 3.3A 0 - 3-V, 0 - 2A 0 - 56V, 0 - 1.1A 30W, 60W, 120W & 125W H=160, D=320, W=140 (Single) W=260 (Dual/Triple) Ì Low cost high specification, compact linear design Ì Constant voltage or constant current operation, automatic crossover Ì Fully isolated outputs on duals and triples, separate output switches Ì Isolated logic output switchable as 3.3V or 5V (Exept 302T) Ì Digital meters with bright LED displays for voltage and current Ì Safety & EMC complies withEN61010-1, EN50081-1, EN50082-1 Note: Model EX302P is a digitally programmable version of the EX302 and offers a low cost, RS232 solution for most power supply applications where the coplexity of GPIB is not needed.

Mftrs. List No. EL301 EL183 EL302 EL561 EL302D EL302T EL303 Outputs Single Single Single Single Dual Triple Single 0-30V @ 0-1A 0-18V @ 0-3.3A 0-30V @ 0-2A 0-56V @ 0-1.1A 2 x 0-30V @ 0-2A 2 x 0-30V @ 0-2A & 3.3V/5V @ 1A 0-30V @ 0-3A <0.01% for 90% load change <0.01% for 10% line chang Typically <1mV rms Voltage 0.3% ±1 digit, current 0.6% ±1 digit

205833

0-42V 10A Power Supply

EX4210R A constant coltage or constant current output power supply with separate 14mm, 4 digit meters for voltage and current. Ì Switchable remote or local sensing Ì Coarse and fine controls for voltage output adjustment and a single logarithmic control for the current output Ì Ideal as a test source for the new 42V automotive parts Ì Uses fan blown cooling Ì Power input is 230V AC - 600VA maximum Ì Weight: 3.8kg

H = 160, W = 140, D = 320 (mm)

Weights 3.4 4.4 4.4 4.4 7.5 7.5 7.5

Load Regulation Output Impedance Ripple & Noise Transient Response Meter Accuracy

0.01% of maximum output for a 90% load change <5m in C.V. mode and < 50k in C.A. mode Typically <2ms (CV mode) <200s to within 50mV of set level for a 90% load change Voltage 0.3% ±1 digit, Current 0.6% ±1 digit

248531

Price Each Mftrs. List No. EX4210R Standard Calibration Charge UKAS Calibration Charge Order Code 428-318138 S N 1+ 403.00 10+ 362.70 Price Each 45.13 71.21

Load regulation (main output) Line regulation (main output) Ripple & noise (main output) Meter accuracies

Typ Single Single Single Programmable Single Single Dual Triple Single

Mftrs. List No. EL301 EL302 EL302P EL183 EL561 EL302D EL302T EL303

Order Code 488-82338 175-06738 471-847138 488-83538 488-84738 175-07938 175-08038 847-398638

1+ 148.00 162.00 234.00 162.00 162.00 285.00 305.00 193.00

Price Each 3+ 133.20 145.80 210.60 145.80 145.80 256.50 274.50 181.97 Price Each 45.13 71.21

5+ 129.50 141.75 204.75 141.75 141.75 249.38 266.88 174.49

Power Supplies

CPX200 & CPX400A

40

Standard Calibration Charge S UKAS Calibration Charge N

H=130, W=210, D=350

Ex series Bench Power Supplies

EX Series Single, Dual & Triple 0 - 35V, 0 - 4A 0 - 35V, 0 - 5A 0 - 75V, 0 - 2A 175W, 280W & 300W

Ì Dual isolated outputs Ì Total power 350W or 840W Ì PowerFlex design allows higher currents at lower voltages Ì Current up to 10A (CPX200) or 20A (CPX400)

Output voltage Output current Weight Load regulation Line regulation

Ì Ì Ì Ì Ì

Variable OVP trip circuits Switchable remote sense terminals Compact half-rack 3U case size Safety complies with EN61010-1 EMC complies with EN61326

CPX400A 2 x 0 - 60V 2 x 0 - 20A 7kg

337881

CPX200 2 x 0 - 35V 2 x 0 - 10A 5kg <0.01% for a 90% load change <0.01% for a 10% line voltage change

Ì Low cost & high specification, compact switch-mode designs Ì Constant voltage or constant current operation, automatic crossover Ì Fully isolated outputs on duals and triples, seperate output switches Ì Isolated 5A logic output switchable as 3.3V or 5V (EX354T) Ì Multiple modes including 0-150V/2A & 0-75V/4A (EX752M) Ì Digital meters with bright LED displays for voltage and current Ì Safety complies with EN61010-1 Ì EMC complies with EN50081-1, EN50082-2-2 Note: Model EX355P is a digitally programmable version of the EX355 and offers a low cost, RS232 solution for most power supply applications where the coplexity of GPIB is not needed.

Mftrs. List No. EX355 EX354D EX354T EX752M Outputs Single Dual Triple Multi-mode Dual 0-35V @ -5A 2 x 0-35V @ 0-4A 2 x 0-35V @ 0-4A & 3.3-5V @ 5A 2 x 75V @ 2A or 75V @ 4A or 150V @ 2A <0.01% for 90% load change <0.01% for 10% line change Typically <1mV rms, <10mV pk-pk Voltage 0.3% ±1 digit, current 0.6% ±1 digit

227642

Mftrs. List No. CPX200 CPX400A

Order Code 864-28638 114-734938 S N

1+ 607.00 811.00

Standard Calibration Charge UKAS Calibration Charge

Price Each 3+ 531.13 725.00 Price Each 49.44 69.70

5+ 509.88 667.80

Weight (kg) 3 4.3 4.3 4.4

QL Digital Control Precision PSU's Standard & BUS Interfaced

The QL355T is a linear regulated triple output power supply offering superior performance including very high precision and full digital control. Output power is more than 100 watts per main output and switchable ranges enable a higher output current to be obtained at lower voltages. Settings can be done by numeric entry or by a spin wheel. Non-volatile memories are provided for instant recall of past settings. The P version incorporate an isolated bus interface supporting GPIB, RS232 and USB standards.

Load regulation (main outputs) Line regulation Ripple & noise (main outputs) Meter accuracies Mftrs. Outputs List No. Single EX355 Single ProgrammableEX355P Dual EX354D Triple EX354T Multi-Dual EX752M Standard Calibration Charge S UKAS Calibration Charge N

Order Code 351-085238 471-848338 864-26238 864-27438 351-084038

1+ 264.00 336.00 387.00 438.00 458.00

Price Each 3+ 237.60 302.40 348.30 394.20 412.20 Price Each 45.13 71.21

5+ 231.00 294.00 338.63 383.25 400.75

Order before 8pm for FREE next day delivery

Valid until 28th February 2007

Ì Dual outputs of 35V/5A 105W max. each Ì Auxiliary output of 2.7/3.3/5.0V at 1A Ì Setting by direct numeric entry or spin wheel Ì 1mV resolution at full output voltage Ì Multiple ranges for increased current flexibility Ì Excellent noise, regulation and dynamics Ì Multiple non-volatile setting memories

Main Output(s) Output Ranges:

Ì Linked operation of main outputs for convenient series, tracking or parallel operation Ì OVP or OCP trips with alarm output Ì Selectable remote sense terminals Ì Compact modular width for bench or rack Ì Front and rear mounted terminals (P version) Ì GPIB, RS232 and USB interfaces (P version)

Main Output(s) Meter Types: Watts Display: Protection: DC Output Switch: Remote Sensing: General AC Input:

5 digit volts display and 4 digit current display with 14mm (0.56") LED displays Push-button displays of V x I Comprehensive protection including settable OVP and OCP limits with external alarm output Sets output voltage level to zero when off Keyboard selectable as Local or Remote. Spring loaded terminal block

Setting Resolution: Setting Accuracy: Setting Memories: Operating Mode: Load Regulation: Line Regulation: Ripple & Noise: Meter Types: Watts Display: Protection: DC Output Switch: Remote Sensing:

0V to 35V at 0 to 3A 0V to 15V at 0A to 5A 0V to 35V at 0mA to 500mA Voltage - 1mV at all voltages Current - 1mA (0.1mA on 500mA range) Voltage - 0.03% Current - 0.2% 30 memories plus power-down memory (10 memories for each main output plus 10 memories for linked-mode operation) Constant voltage or constant current with automatic cross-over <0.005% of max. O/P for a 90% change <0.005% of max. O/P for a 10% change Typically <0.35mV rms, CV mode 5 digit volts display and 4 digit current display with 14mm (0.56") LED displays Push-button displays of V x I Comprehensive protection including settable OVP and OCP limits with external alarm output Sets output voltage level to zero when off Keyboard selectable as Local or Remote. Spring loaded terminal block

230V or 115V ±10% AC, 50/60Hz; Installation category II, 200VA max. Safety: Complies with EN61010-1 EMC: Complies with EN61326 Remote Control (P versions only) Bus Interfaces: Full remote control and readback via GPIB, RS232 and USB interfaces

Rack Mounting A 4U rack mount is available which will take a maximum of three single units or one single plus one triple. Blanking plates are available for unused positions.

333654

Mftrs. List No. QL355. QL355P. QL564 QL564P

Order Code 471-841038 471-844638 471-842238 471-846038 S N

1+ 356.00 505.00 356.00 505.00

Price Each 3+ 320.40 454.50 320.40 454.50

Standard Calibration Charge UKAS Calibration Charge

5+ 311.50 441.88 311.50 441.88 Price Each 45.13 71.21

Auxiliary Output Output Voltage: Switchable 2.7, 3.3, or 5V Output Current: >1.0A; overcurrent indication DC Output Switch: Sets output voltage level to zero when off Linked Operation Linked mode enables settings to be changed on both main outputs simultaneously. This is useful for parallel wiring or tracking operation. An extra set of memories is provided for linked mode General AC Input: 230V or 115V ±10% AC, 50/60Hz Installation Category II, 500VA max. Safety: Complies with EN61010-1 EMC: Complies with EN61326 Remote Control (P version only) Bus Interfaces: Full remote control and readback via GPIB, RS232 and USB interfaces

Bench Power Supplies

SM Series Ì High currents and voltages Ì Can operate in

digimess®

Rack Mounting A 4U rack mount is available which will take a maximum of three single units or one single plus one triple. Blanking plates are available for unused positions.

333655

either constant current or constant voltage mode Ì Two large red 3.5 digit LED displays for easy viewing Ì Switch mode design results in small lightweight units Ì All units are supplied with mains leads and operating manuals

W=365 H=165 D=235mm. Weight 7kg Model Outputs Output Voltage Output Current Line Regulation Load Regulation (I<6A) Load Regulation (I>6A) Ripple and Noise Voltage Accuracy Current Accuracy Input Voltage SM5020 SM3040 Single Single 0 - 50V 0 - 30V 0 - 20A 0 - 40A <0.02% + 3mV <0.02% + 3mV <0.02% + 10mV <0.02% + 10mV <0.1% + 5mV <0.1% + 5mV <3mV rms <3mV rms 1.0% + 2 digits 1.0% + 2 digits 2.0% + 2 digits 2.0% + 2 digits 110/200 V ac (externally selectable) SM10010 Single 0 - 100V 0 - 10A <0.02% + 3mV <0.02% + 10mV <0.1% + 5mV <3mV rms 1.0% + 2 digits 2.0% + 2 digits

417513.428719

41

Mftrs. List No. QL355T QL355TP

Order Code 471-843438 471-845838 S N

1+ 709.00 862.00

Price Each 3+ 620.38 754.25

Standard Calibration Charge UKAS Calibration Charge

5+ 595.56 724.08 Price Each 45.13 71.21

QL Digital Control Precision PSU's Standard & BUS Interfaced

Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì 35V/5A 105W max. or 56V/4A 112W max. Setting by direct numeric entry or spin wheel 1mV resolution at full output voltage Multiple ranges for increased current flexibility Excellent noise, regulation and dynamics Multiple non-volatile setting memories OVP or OCP trips with alarm output Selectable remote sense terminals Compact modular width for bench or rack Front and rear mounted terminals (P version) GPIB, RS232 and USB interfaces (P version)

Output 20A 40A 100V

Mftrs. List No. SM5020 SM3040 SM10010

Order Code 107-681238 107-681338 107-681538 S N

1+ 430.24 490.42 500.45

Standard Calibration Charge UKAS Calibration Charge

Price Each 2+ 387.22 441.38 450.40 Price Each 39.11 59.87

5+ 361.41 411.95 420.38

The QL series are linear regulated power supplies offering superior performance including very high precision and full digital control. Output power is more than 100 watts per main output and switchable ranges enable a higher output current to be obtained at lower voltages. Settings can be done by numeric entry or by a spin wheel. Non-volatile memories are provided for instant recall of past settings. The P versions incorporate an isolated bus interface supporting GPIB, RS232 and USB standards.

Main Output(s) Output Ranges: (QL355, QL355P) Output Ranges: (QL564, QL564P) Setting Resolution: Setting Accuracy: Setting Memories: Operating Mode: Load Regulation: Line Regulation: Ripple & Noise: 0V to 35V at 0 to 3A 0V to 15V at 0A to 5A 0V to 35V at 0mA to 500mA 0V to 56V at 0 to 2A 0V to 25V at 0 to 4A 0V to 56V at 0mA to 500mA Voltage - 1mV at all voltages Current - 1mA (0.1mA on 500mA range) Voltage - 0.03% Current - 0.2% 10 memories plus power-down memory Constant voltage or constant current with automatic cross-over <0.005% of max. O/P for a 90% change <0.005% of max. O/P for a 10% change Typically <0.35mV rms, CV mode

FREE technical help

If you're an account holder, our trained engineers are here to help Tel 08701 200 202 Fax 08701 200 203 eMail [email protected]

08701 200 200

Fax: 08701 200 201

www.farnellinone.co.uk

DIGITAL OSCILLOSCOPE ANALYSERS MTX · Innovative design, Ergonomic functions for convenience and efficiency · Multifunctional device: oscilloscope, FFT analyser, harmonic analyser, recorder · Sampling speed 20GS/s and memory depth of 50k per channel in "oscilloscope" mode · 2 or 4 measurement channels and up to 8 curves on screen · FFT "real time" analysis as standard and maths functions on the channels · LCD tiltable screen in colour or mono versions · "Windows" ergonomics: direct on-screen commands using a mouse · State-of-the-art controls and short-cuts on front (20 buttons + encoder) · RS232 and Centronics connectivity as standard, USB as an option · Ethernet network and HTML server as an option

GRAPHIC DIGITAL MULTIMETERS TRMS MTX MOBILE · Large tiltable LCD display, with bilingual menus (F, GB) · Four 100,000 point digital displays, bargraph, graphic measurement log · Voltage: 50kHz specified bandwidth/0.1% basic accuracy · Current: 20kHz specified bandwidth/0.08% basic accuracy · 3 measurement terminals with automatic selection, "full current autoranging" · Virtual measurement switch 8 direct access buttons · With `AUTOPEAK' mode, greater restriction of the peak factor · Function: SPEC, HOLD, AUTOHOLD, REL, SURV, MEM · Frequency measurements up to 2 MHz: duration, duty report, event metering

· Temperature measurements using probes Pt 100. Pt 1000. thermocouples J or K · "Favourite measurement" key for physical quantity (conversion or unit) · 6,500 storable measurements · Optical RS232, USB and Bluetooth communication (model specific) · Battery operation, NiMH rechargeables, or mains adapter

MTX3252-M MTX3252-C MTX3352-M MTX3352-C MTX3354e-C Display type LCD 320 x 240 + backlighting Display B/W Colour B/W Colour B/W Screen curves 4 curves + 4 references Language selection Selection of 5 languages per menu Bandwidth 60MHz 100MHz 150MHz Number of channels 2 4 Max input voltage Cat. II / 150V-400V (with HX0003) Trigger modes Auto, normal, single sequence Complex Trigger source CH1, CH2, EXT, SECT Repeat sampling 20GS/s Single sequence sampling 100M/s 200M/s Memory capacity Depth 50000 points - 4 ref. + 4 curves 50k Functions GLITCH,ENVELOPE, MEAN, XY, AUTOSET, FFT, MATH, Curser Automatic measurements 20 Communication RS232 + Centronics + Mouse port USB + Mouse port Dimensions / weight 210x177x200 / 2.5kg Guarantee 3 years Mftrs. List No. MTX3252-M MTX3252-C MTX3352-M MTX3352-C Order Code 423-241038 423-252538 423-242238 423-253738 Price Each £743.15 £936.99 £965.07 £1158.90

E-OSCILLOSCOPES - ETHERNET VERSIONS

· File exchange generated by a local or remote PC in a `Company Network' · Use of a local Network printer or remote network printer in a `Company Network'

Mftrs. List No. MTX3252e-M MTX3252e-C MTX3352e-M MTX3352e-C MTX3354e-C Order Code 468-321338 468-322538 468-325038 468-327438 113-714638 Price Each £863.01 £1054.11 £1085.62 £1276.03 £2139.04

MTX3281 (1) MTX3282 (2) MTX3283 (3) Voltages DC, AC and AC+DC (automatic or manual ranges) Ranges / resolution 1000A - 10mA - 100mA - 1000mA - 10A - 20A / 10nA to 1mA Basic precision DC 0.1% L + 8D 0.03% L + 8 D 0.02% L + 8D Basic precision AC and AC+DC 0.7% L + 40D 0.3% L + 40D 0.3% L + 40D Specified bandwidth DC to 50kHz DC to 100 kHz (2) DC to 200kHz Currents DC, AC and AC+DC (automatic or manual ranges) Ranges / resolution 1000A - 10mA - 100mA - 1000mA - 10A - 20A / 10nA to 1mA Basic precision DC 0.08% L + 8D 0.08% L + 8D 0.08% L + 30D Basic precision AC and AC+DC 1.0% L + 30D 0.3% L + 30D 0.3% L + 30D Specified bandwidth DC to 20kHz DC to 50kHz DC to 50kHz Time measurements (automatic or manual ranges) Frequency and period Measurements of 0.62Hz to 2MHz - 7 ranges of 10Hz to 2MHz - basic precision 0.02% L + 8D Cycle ratio Resolution 0.01% - Period of 200s Signal at 0.8s - Duration of pulse > 5s Positive and negative pulses (2) (3) Counting up to 99 999, min. duration 5s Measurement of duration 100s to 12,5s, resolution 10s Time elapsed Event graph with zoom and cursors For measurement: relative mode (1), or date/hour (2) (3) Resistances & Continuity (automatic or manual ranges) Ranges / resolution 1000 - 10k - 100k - 1000k - 10M - 50M / 10m to 1k Precision 0.1% L + 8D 0.07% L + 8D 0.07% L + 8D Detection in audio continuity Range 1000 - response time 5ms Diode test Diode voltage measurements 0 to 2.60V - precision 2% L + 30D - measurement current approx. 1mA. Capacities (automatic or manual ranges) Performance 7 ranges 10nF to 10mF - basic precision 1% L + 5D - measurement time < 2s to 100F Temperatures Probes Pt 100 or Pt 1000 (2) (3) Measurements of -125°C to +800°C - basic precision 0.5°C Probes, thermocouples J or K Measurement of -40°C to +750°C (TC J) or +1200°C (TC K) - basic precision 0.1% L + 3°C Other measurements V Peak >250s and peak factor Unique or periodical phenomena - additional error in voltage 3% L + 50 D, in current 5% L + 50 D Preferred measurement key Associates any physical size to a key (function y = Ax+B and unit can be set) Measurement in dBm (3) Resolution 0.01 dBm - adjustable reference 1 to 10000 Resistive power U2/R or R I2 (3) Resolution 100 W - adjustable reference 1 to 10000 Mftrs. List No. Standard Versions MTX3281 MTX3282 MTX3283 RS232 Versions MTX3281-COM MTX3282-COM MTX3283-COM Bluetooth Versions MTX3281-BT MTX3282-BT MTX3283-BT Cover HX0052 Order Code 111-145838 111-145938 111-146038 111-146138 111-146338 111-146438 111-146538 111-146638 111-146738 111-146838 Price Each £204.79 £273.29 £321.23 £259.59 £328.08 £376.03 £334.93 £396.58 £444.52 £40.00

VERSION 4 OF THE SX-METRO SOFTWARE

· SX-METRO/B: Single station licence · SX-METROE/B: Establishment licence · SX-METROVUP: Allows upgrading of the old V3 versions

Mftrs. List No. SX-METRO/B SX-METROE/B SX-METROVUP Order Code 469-192138 469-194538 469-195738 Price Each £170.55 £494.52 £60.27

THREE-PHASE NETWORK ANALYSERS CA8332B and CA8334B

MONOPHASE POWER ANALYSERS CA8220 and CA8230

NEW

Designed for verification and maintenance departments in industrial or administrative buildings, the Qualistar C.A 8332 enables the user to obtain an instant picture of the main characteristics of electrical network quality. Handy and very compact, this instrument also gives numerous calculated values and several processing functions in line with current standards: EN 50160, IEC 61000-4-15, IEC 61000-4-30, IEC 61000-4-7. · 4 channels · Colour LCD screen for graphic display · 3 structured display modes: observation, diagnostic, monitoring · Complete triple-phase analysis: - voltage, current, - power / energy, - harmonics (50th rank), flicker, - alarm trigger... · Processing of data via PC software QualistarView or DataViewer Pro. · Working memory: 2Mb · 8 screen-record · Compliant with IEC 61010-1, 600V. cat III · Accessories according to category IV · 3-year guarantee · Supplied with QualistarView software, serial fibre optical cable DB9F, 4 voltage cables banana/banana (length 3m), 4 crocodile clips, operating instructions, mains cable and MN93A clamp

CA8332B

Display: Voltage: LCD colour 320 x 240 Phase-Phase : 830V TRMS Phase-Neutral : 480V TRMS Memory: Battery: Harmonic: Recording: Alarm: Transients: Network: Interface:

Description CA8332B CA8334B AmpFLEX A193 cables 450mm (Pack of 3)

· Single phase or balanced three phase power analyzer is economical and extremely easy to use. Equipped with direct access to its various functions, it provides greater safety as it automatically recognises the type of connected sensor. It provides you with all the power measurements you need. It will enable you to measure and qualify your electrical network harmonics. Dataviewer software enhances its capacity for configuration, transfer and processing of data on the PC. · Voltage range: 6 V RMS to 600 V RMS AC+DC · Current range AC: 5mA to 6500A · Current range DC: 1A to 1700A · Values : Min, Max, Mean, Peak (+ and -), CF · Power : W, VA, var, DF, THD, cos , tan · Standard IEC 61010-1 Cat III 600V

CA 8220 - Accessories supplied: 6 AA batteries, 1 banana red lead (straightstraight), 1 banana black lead (straight-straight), 2 test probes 4mm 1 x red and 1 x black, 2 crocodile clips 1 x red and 1 x black, 1 optical fibre cable RS 232 / USB CA 8230 - Accessories supplied: 1 carry case, 6 batteries 1.2V, 1 banana red lead (straight-straight), 1 banana black lead (straight-straight), 2 test probes 4mm 1 x red and 1 x black, 2 crocodile clips 1 x red and 1 x black, 1 mains adaptor, 1 optical fibre cable RS 232 / USB and 1 DataViewer user software

Characteristics Voltage range: AC current range: DC current range: Min, Max, Mean, Peak value (+ and -), CF: Fundamental frequency: Screen: Monophase and three phase balanced: Power W, VA, var, DF, THD, cos : Energies varh and VAh: Harmonics (CEI 1000-4-7): Recordings: Alarms: Flicker PST (CEI 1000-4-15): Rate of motor rotation: Temperature (PT100): Resistance (rolling): Phase rotation: Measurement memory: Ambient temperature: (Relative) humidity rate: Protection index: RS232 port: Power:

CA8220

CA8230

CA8334B

LCD colour 320 x 240 Phase-Phase : 830V TRMS Phase-Neutral : 480V TRMS 4Mb 3800mAh Yes + expert mode Yes Yes Yes AC+DC RS232

Price Each £1920.00 £2350.00 £300.00

2Mb 1800mAh Yes Yes (restricted) Yes [AC+DC] RS232

Order Code 123-072838 123-072938 123-073038

6Vrms to 600Vrms AC+DC ±(0.5%+2pts) 5mA to 6500A ±(0.5%+1pt) 1A to 1700A±(1%+1A) Yes 40Hz to 70Hz LCD 173 LCD colour 1/4 VGA backlight segments Yes Yes Yes Up to level 50 Up to several days 4096 Yes 6 RPM to 120 kRPM ±(0.5%) -200°C to 850°C ±(1%+10pts) 0W to 2000W ±(0.5%+1W) Yes, with three phase order display Yes 23°C ± 3K [ 45% ; 75% ] IP54 Yes Batteries (6xAA) Mains or Rechargeable NiMH batteries

Price Each £350.00 £790.00 £115.00 £105.00

Description CA8220 CA8230 Terminal MN93A BK CAmpFLEX A193 450mm cable

Order Code 113-714838 123-073138 123-073238 123-073338

NEW NEW NEW

Prices exclude VAT Power Supplies

PSM Series

Bench Power Supply

Variable Voltage A bench type power supply with variable output voltage and bright, digital AV meters Ì Digital Voltage and Current meters Ì Variable regulated output with coarse/ fine adjustments Ì Coarse/Fine current limiting adjustments Ì Short circuit and overload protected Ì Ground connection facility Ì Robust Case with Feet Ì On/Off switch and mains connection Ì Excellent Value

H = 285, W = 155, D = 133 (mm) Output Voltage 0 to 40V DC Output Current 0 to 3A Voltage Supply 240V AC

248546

H=140, W=230, D=380mm Weight = 10kg

Ì Dual-range voltage/current output: max 200W Ì High resolution: 1mV/1mA Ì Stable & clear power: 0.01% load/line regulation, 350Vrms ripÌ Ì Ì Ì Ì Ì ple 100 sets of memory with timer setting Auto step running with time Self test and software calibration High visible vacuum-florecent display Front and rear output terminal Standard interface: RS-232C, GPIB

PSM-3004 0 - 15V/7A 0 - 30V/4A PSM-6003 0 - 30V/6A 0 - 60V/3.3A

Price Each Description UK Version Standard Calibration Charge UKAS Calibration Charge Order Code 428-319338 1+ 3+ 95.00 89.00 Price Each 45.13 S 71.21 N

PSM-2010 DC Output Low range 0 - 8V/20A High range 0 - 20V/10A Constant voltage operation Regulation Ripple and noise <350Vrms/3mVpp Constant current operation Regulation Ripple and noise Resolution Programming 1mV, 1mA Readback 0.5mV, 1mA Front panel OVP/OCP Accuracy Programming Readback OVP/OCP General Memory Power Interface

1.5 - 30V/1A Laboratory Power Supply

Ì Digital indication of Volts and Amps (Backlit) Ì Over-voltage/Over-current and short-circuit protection Ì Standard test lead connections Ì Lightweight: 400g (Approx.) Ì Compact - External Dimensions: 140x140x51mm (WxDxH)

Output Voltage 1.5 to 30V dc Output Current 0 to 1A dc

Line and load <0.01% + 2mV <350Vrms/2mVpp <50V: <500Vrms/3mVpp >50V: <1mVrms/3mVpp Line and load <0.01% + 250A <2mArms 1mV, 0.5mA 0.5mV, 0.1mA 1mV, 1mA 10mV, 10mA 0.05% + 10mV, 0.2% +10mA 0.05% + 5mV, 0.15% + 5mA 0.1% + 10mV, 0.4% + 10mA 2mV, 0.5mA 1mV, 0.5mA

Ì Mains powered Ì Stackable

Display Resolution - Amps 10mA

338604.344022

Display Resolution - Volts 100mV

44

Mftrs. List No. UK Version PSU 130 EURO Version PSU 130-EU

Order Code 491-342538 815-088538 S N

1+ 49.00 49.00

3+

Price Each 5+ 39.00

10+ 37.50 37.50

Store / recall points 0 - 99 AC 100V/120V/220V ±10%, 230V: - 6% - 10%, 50/60Hz RS-232C, GPIB

381952.403283

45.00

Mftrs. Description List No. Power supply, 0-20V/10A PSM-2010 Power supply, 0-30V/4A PSM-3004 Power supply, 0-60V/3.3A PSM-6003

Price Each Order Code 855-488938 855-489738 855-490038 1+ 549.00 549.00 549.00 3+ 499.00 499.00 499.00 Standard Calibration Charge UKAS Calibration Charge

45.00 39.00 Price Each 34.10 56.76

Multi-Instrument

MS-9150N

Bench Power Supply ­ Variable Voltage

Ì 3 digit LED display Ì Voltage and current meter Ì Coarse and fine rotary controls Ì Short circuit and foldback overload protection Ì Housed in a robust case Ì Ground, red(+) and black(-) connections Ì On/off switch and mains connection

H=260, W=355, D=160mm Weight = 12kg

W=368, H=165, D=318mm. Weight: 17.7kg

A high quality bench type regulated power supply with variable output voltage up to 30V and bright, digital AV meters.

Input voltage Output Voltage 230Vac 50Hz 0 to 30V Output Current 0 to 10A

381013.345372

This multi-instrument system combines four of the most commonly used pieces of test equipment (Frequency Counter, Function Generator, Digital Multimeter (True RMS) and a Power Supply) into one economical unit. Supplied with test leads for DMM, AC power cord and owner's manual. Ì Ì Ì Ì Ì Power supply - high precision, low noise, triple output Frequency counter - 1Hz to 2GHz over 2 channels Function generator - multi-form wave, 2MHz Digital Multimeter - 3999 max counts, dual display Can be connected to PC via USB interface

Channel A 1Hz - 20MHz 20mV RMS 35mVp-p 1M Channel B 20MHz - 2.7GHz 40mV RMS 20MHz-1.3GHz / 70mV RMS 1.3GHz-2.7GHz 3mVp-p 50

Description UK Version Euro Version

Order Code 428-320038 444-786438

1+ 139.00 139.00

Standard Calib. Charge UKAS Calib. Charge

Price Each 3+ 5+ 10+ 130.00 125.00 122.00 130.00 125.00 122.00 Price Each 45.13 S N 71.21

Frequency Counter Measuring range Input sensitivity Maximum input:3V Input impedance

Order before 8pm for FREE next day delivery

Valid until 28th February 2007

Function Generator Wave forms Frequency Voltage level VCF Output impedance Output amplitude Attenuator Digital Multimeter DC voltage AC voltage DC current AC current Resistance Capacitance Power Supply Output voltage Output current Ripple max Load regulation Line regulation Max output current Terminal 1 0-30V 0-2A 1mV 0.1%+5mV 0.1%+5mV 2A/3A Terminal 2 5V 2A 2mV 0.1%+70mV 0.1%+30mV 2.2A Terminal 3 15V 1A 2mV 0.1%+35mV 0.1%+30mV 1.2A

440675.434499

Vac Sine, square, triangle, ramp, skewed sine, pulse, TTL level 0.2Hz - 2MHz 0 - 10V DC Selectable 50 or 600 2 - 20Vpp open load / 1 - 10Vpp (50 load) -20dB Range 400mV, 4V, 40V, 400V, 1000V 400mV, 4V, 40V, 400V, 750V 400A, 4mA, 40mA, 400mA, 20A 400A, 4mA, 40mA, 400mA, 20A 400, 4K, 40K, 400K, 4M, 40M 4nF, 40nF, 400nF, 4uF, 40F, 400F Best Accuracy ±(0.5%+2) ±(2.5%+5) ±(1.5%+2) ±(0.5%+2) ±(0.8%+4) ±(2%+5)

Range Accuracy AC Response

0 to 400V, 400 to 600V 1.2% ± 5 counts (50/400Hz) Averaging 0 to 400 1% ± 5 counts 30 Yes 184 x 62 x 35 227gms -10°C to +50°C 2 x AAA carbon zinc Safety Rating:

0 to 400V, 400 to 600V 1.2% ± 5 counts (50/400Hz) Averaging 0 to 400V, 400 to 600V 1% ± 5 counts 0 to 400 1% ± 5 counts 30 Yes

Vdc

Range Accuracy Range Accuracy Continuity Display Hold Dimensions Dimensions

Operating Temperature: Battery Life:

IEC 1010-2-031, 600V CAT III

232271

Mftrs. List No. MS-9150N

Price Each Order Code 119-115038 1+ 299.00 3+ 280.00

Mftrs. List No. FLUKE 321 FLUKE 322 C101 Carry Case Standard Calibration Charge UKAS Calibration Charge

Order Code 389-051038 389-052138 947-978338

3-in-1 Lab Unit

LAB1

Price Each 1+ 2+ 74.00 72.15 81.00 78.98 27.00 25.65 Price Each 45.13 S 71.21 N

5+ -- -- -- -- 25.00

Fluke 330 Series Clamp Meters

Ì Small body and jaws fit perfectly in your hand and into tight places Ì Handy Display Hold button keeps measurements on the display Ì Meter controls are positioned so current measurements can be done with one hand (index finger on clamp opening lever and thumb on rotary switch) Ì Improved low current measurement accuracy from new microprocessor technology

A space saving lab solution featuring a multimeter, a power supply and a soldering iron. Covers 99% of your home lab needs and is the perfect solution for starters or schools. Digital Multimeter Ì 3 1/2 backlit LCD Ì Automatic polarity indication Ì Diode, transistor and continuity test Ì data-hold function and buzzer Regulated Power Supply Ì LED overload indication Ì Output on/off switch Ì Very low ripple Ì LED power indication Soldering Station Ì Low-voltage iron: 24V Ì Ceramic 48W heating element with temperature sensor Ì Temperature range: OFF 150 - 450°C Ì Lead-free soldering possible

Ì Auto shut-off maximizes battery life so the meter works when you need it Ì In-rush current function (on most models) for measuring starting current for motors, lighting,etc.

FLUKE 333 Aac Range Accuracy 0 to 400A (50/60Hz) FLUKE 334 0 to 600A (50/60Hz) FLUKE 335 0 to 600A (50/60Hz) FLUKE 336 0 to 600A (10-100Hz) (100-400Hz) FLUKE 337 0 to 999.9A (10-100Hz) (100-400Hz) [email protected] [email protected] [email protected] +2% for C.F2 AC Response Integration time Adc Range Accuracy Vac Range Accuracy Averaging 0- 600V (50/60Hz) Averaging 100mS 0- 600V (50/60Hz) True rms 100mS 0- 600V (50/60Hz) True rms 100mS 0 to 600A 2% ± 3 counts 0- 600V (20-100Hz) (100-400Hz) AC Response Vdc Range Accuracy Range Accuracy Continuity Averaging 0 - 600V 0 - 600R Averaging 0 - 600V 0 - 600R 601-6000R 30R 30R True rms 0 - 600V 0 - 600R 601-6000R 30R True rms 0 - 600V 0 - 600R 601-6000R 30R 0- 600V (20-100Hz) (100-400Hz) True rms 0 - 600V 0 - 600R 601-6000R 30R 5-400Hz 0.5% ± 5 counts 10-100Hz5A 5-10Hz 100-400Hz 10A MIN/MAX Backlight No No No Yes No Yes No Yes Yes Yes True rms 100mS 0 to 999.9A

45

Includes: DMM test leads, user manual, sponge, spare soldering bit, 9V battery and mains cable.

Digital Multimeter DC Voltage 200mV to 600V in 5 steps AC Voltage 200V and 600V DC Current 200A to 10A in 5 steps Resistance 200R to 2MR Safety Category Regulated Power Supply Selectable Output Voltages Max. Current 600V CATI 300V CATII 3 - 4.5 - 6 - 7.5 - 9 - 12 V dc 1.5A (2A peak)

417173.423173

2% ± 5 counts 2% ± 5 counts 2% ± 5 counts 2% ± 5 counts 2% ± 5 counts 6% ± 5 counts 6% ± 5 counts

Crest factor (50/60Hz)

-

-

[email protected] [email protected]

[email protected] [email protected]

Mftrs. List No. LAB1

Order Code 105-646138

1+ 85.00

Price Each 3+ 81.22

+2% for C.F2 +2% for C.F2

5+ 77.13

Fluke 320 Series Clamp Meters

Ì Precise measurements better than 2% basic accuracy Ì Measures ac current to 400A with 0.1A or 100mA resolution Ì 400A current range with 0.01A or 10 mA resolution (Model 322) Ì Measures ac volts to 600V with 0.1V resolution to 400V Ì Measures dc volts to 600V with 0.1V resolution to 400V (Model 322) Ì Resistance to 400 Ohms with 0.1 resolution continuity test function

1% ± 5 counts 1% ± 5 counts 1% ± 5 counts 1% ± 5 counts 1% ± 5 counts 6% ± 5 counts 6% ± 5 counts

1% ± 5 counts 1% ± 5 counts 1% ± 5 counts 1% ± 5 counts 1% ± 5 counts

1% ± 5 counts 1% ± 5 counts 1% ± 5 counts 1% ± 5 counts 1% ± 5 counts

FLUKE 321 Aac Range Accuracy AC Response 0 to 400A 1.8% ± 5 counts(50/60Hz) 3% + 5 counts ( 60 Hz - 400 Hz) Averaging

FLUKE 322 0 to 400A 1.8% ± 5 counts(50/60Hz) 3% + 5 counts ( 60 Hz - 400 Hz) Averaging

Hz

Range Accuracy Trigger Level

08701 200 200

Fax: 08701 200 201

www.farnellinone.co.uk

Prices exclude VAT

FLUKE 333 Display Hold Height Width Depth Weight Operating Temperature: Altitude: Battery Life: Safety Rating: Temperature De-rating: Storage Temperature: Three-year warranty Yes 240 80 40 0.31 FLUKE 334 Yes 240 80 40 0.31 FLUKE 335 Yes 240 80 40 0.31 FLUKE 336 Yes 250 80 40 0.31 FLUKE 337 Yes 250 80 40 0.31 Non-invasive Current Measurement LH240 Ranges (auto-ranging) Measurement methods Resolution Accuracy Crest Factor Maximum measurable load Maximum overload Voltage Measurement Methods & measurement Maximum overload Ranges (auto-ranging) ac true rms or dc 1,000V 400V to 600V

LH1040

LH2040 400A, 2000A 100mA (400A range) 1A (2000A range)

-10°C to +50°C 2,500 metres Alkaline, approximately 150 hours continuous, Automatic low-battery indicator IEC 1010-2-031, 600V CAT III Add 0.1 x specified accuracy for each °C above 28°C or below 18°C -40°C to +60°C

230979

40A, 200A 400A,1000A dc or ac True RMS, or dc only 10mA (40A range) 100mA (400A range) 100mA (200A range) 1A (1000A range) +/-1.3% of reading +/- 3 digits 6 maximum for True RMS measurements 200A dc or ac peak 1000A dc or ac peak 10,000 amps

2000A dc or ac peak

Mftrs. List No. FLUKE 333 FLUKE 334 FLUKE 335 FLUKE 336 FLUKE 337 H3(Holster) C101 Carry Case

Order Code 369-305338 369-306538 369-307738 369-308938 369-309038 369-310738 947-978338 S N

1+ 107.00 134.00 152.00 224.00 269.00 19.00 27.00

Standard Calibration Charge UKAS Calibration Charge

Price Each 2+ 104.33 130.66 148.21 218.41 262.29 -- -- 25.65 Price Each 45.13 71.21

5+ -- -- -- -- -- -- -- -- -- -- -- -- 25.00

Resistance, Continuity and Diode Testing Ranges (auto-ranging) 400R to 4kR Resolution 0.1 (400 range), 1 (4k range) Accuracy ±1% of reading ±3digits Input protection, & diode test To 600V, dc or sinewave rms Diode-test 3.2V max. open circuit, 0.3mA short circuit Reads forward-based diode voltage to 2,000mV Diode-test accuracy ±1% of readings ±2digits Battery Type Battery life Weight Jaw size 9V alkaline : MN1604, PP3, IEC6LR6I or equiv. Typically 40 hours 500g 55mm

222413

AC/DC Current Clamp Meters

1000A Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì AC and DC Clamp on current measurement up to 1000A Reliable and accurate none-intrusive current clamp Compact lightweight design ac and dc measurement to 400A or 1000A Autoranging 40A/400A (LH410) 400A/1000A (LH1010) Excellent accuracy Manual zero Display hold for convenience in use Conformance to IEC1010 and EMC standards Low battery warning

LH410 LH1010 400A, 1000A 100mA,1A +/-1.3% of reading +/-5 digits 1 x 30mm/1.18 inch Ø 196 x 71 x 21mm

222505

Mftrs. List No. LH240 LH1040 LH2040

Order Code 626-06538 626-07738 626-08938 S N

1+ 329.95 329.95 356.03

Standard Calibration Charge UKAS Calibration Charge

Price Each 5+ 304.57 304.57 328.64 Price Each 45.13 71.21

10+ 282.82 282.82 305.17

Current Clamp Meter

72-6130 Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì

AC Current DC Voltage AC Voltage Resistance Frequency

46

Ranges (autoranging) Resolution Basic accuracy Max. jaw capacity Dimensions

40A, 400A 10mA,100mA +/-1.3% of reading+/-8 digits 1 x 19mm 0.75 inch Ø 184 x 71 x 31mm

Mftrs. List No. LH410 LH1010

Order Code 184-42138 100-21338 S N

1+ 145.42 109.32

Standard Calibration Charge UKAS Calibration

Price Each 5+ 134.24 100.91 Price Each 45.13 71.21

10+ 124.65 93.70

Autorange and manual AC/DC voltage and AC current measurement Resistance and Frequency measurement Large 3.75 digit, 3999 count LCD display with bargraph Peak/data hold MAX/MIN mode Zero adjustment 46mm jaw opening Diode test Audible continuity test Auto power off Meets IEC 1010 600V CAT III Supplied with 9V PP3 battery, test leads, carry case and owners manual Dimensions (WxHxD): 67x229x38mm Weight 0.45kg

Max Resolution 0.1A 0.1mV 1mV 0.1 0.01Hz Basic Accuracy ±(2% + 10 digits) ±(0.75% + 2 digits) ±(1.2% + 5 digits) ±(1% + 3 digits) ±(0.1% + 2 digits)

337146

Range 400A, 1000A 400mV, 4V, 40V, 400V, 1000V 4V, 40V, 400V, 750V 400, 4K, 40K, 400K, 4M, 40M 100Hz, 1KHz, 10KHz, 100KHz, 800KHz,

True RMS AC/DC Clamp - On Multimeters

200A/1000A/2000A Ì ac & dc amps, volts, ohms, diode and continuity testing Ì True RMS measurement of complex waveforms avoids errors Ì True RMS measurement available for ac, dc (A, V) and ac + dc (A) Ì Autoranging and auto-zeroing Ì Analysis of ac and dc current components Ì Excellent accuracy - little affected by external magnetic fields or off-centre conductor positioning Ì Display-hold and max-hold modes for convenience in use Ì Analogue outputs for recorder, logger or oscilloscope Ì Large jaw capacity-takes 50mm or 2x30mm diameter cables Ì IEC1010 safety features include a tactile barrier and special jaw design Ì Comformity with EMC Standards reduces susceptibility to electromagnetic interference and ensures high reliability Ì Supplied with soft case and test leads

H=251, W=98, D=52mm

Mftrs. List No. 72-6130. Standard Calibration UKAS Calibration

Price Each Order Code 490-831438 S N 1+ 59.00 3+ 55.00 Price Each 34.10 56.76

Mini Current Clamp Meter

72-6614

A compact multi-function clamp meter featuring AC/DC voltage and current, temperature, capacitance, resistance and frequency measurement. Clear controls and a large LCD display provide an ideal solution for a range of measurement applications.

Order before 8pm for FREE next day delivery

Valid until 28th February 2007

Ì Auto/manual ranging Ì AC/DC voltage and current measurement Ì Temperature, Capacitance, resistance and frequency measurement Ì High accuracy and resolution Ì Large 3.75 digit, 3999 count LCD display

AC/DC Current DC Voltage AC Voltage Resistance Capacitance Temperature Frequency Range 40A, 200A 600V 600V 40 to 40M 4nF to 4F -40°F to 1800F 100Hz to 100KHz

Ì Ì Ì Ì Ì Ì

Min/Max and relative function Data hold 23mm jaw capacity Audible continuity tester Meets IEC1010 CAT II 600V Supplied with 2x AA batteries, K-type thermocouple, test leads, carry case and user instructions

Basic Accuracy ±(1.5% ± 2 digits) ±(1.5% ± 3 digits) ±(1.5% ± 5 digits) ±(1.5% ± 2 digits) ±(3% ± 2 digits) ±(0.5% ± 4°F) ±(0.5% ± 2 digits)

Multi-core AC Digital Clamp Meter

MMC850 A unique solution to current measurement in multi-core cables, without the need to split cores. Simply clamp the MMC850 to a multicore cable and read the current flowing. Conventional current clamp meters can only measure current in a single core cable, requiring multicore cables to be split before a core can be measured. Unlike conventional clamp meters, the MMC850 has a complex array of Planar magnetic sensor coils to calculate the current flowing in the conductors of multicore cables with either 2 or 3 cores. The convenience and potential time saving from using the multi-core clamp is considerable. A single button switches the clamp between multi-core and single core operation, ensuring the MMC850 is the onlyclamp meter you need to carry. The MMC850 has a tough and lightweight clamp head, allowing good access to awkward locations and cables.

W=94, H=227, D=44.5mm

Max Resolution 10mA 0.1mV 1mV 0.1 1pF 0.1°F 0.01Hz

337214

Mftrs List No. 72-6614

Price Each Order Code 490-830238 S N 1+ 99.50 3+ 92.00 Price Each 34.10 56.76

Standard Calibration UKAS Calibration

Mini True RMS AC/DC Clamp Meter

72-6185

Ì Single, two or three core cable measurement Ì Current measurement to 200A on single core and 100A on multiple cores Ì 0.1A resolution Ì Flat or round section cables Ì No need to split wires

Ì Cable centralising clamp for best accuracy Ì Backlit display Ì Suitable for supply frequencies from 45Hz to 400Hz Ì IEC 61010-1 CATIII 600 V

419244.428559

Description Mftrs. List No. Clamp Meter MMC850-EN Standard Calibration Charge UKAS Calibration Charge

Order Code 108-623338 S N

1+ 119.00

Price Each 3+ 115.00 Price Each 34.10 56.76

5+ 110.00

Fluke 787 Process

Ì High accuracy and resolution Ì Large 33/4 digit, 3999 count LCD with bargraph Ì Frequency Ì Max/Min, auto zero

AC current range DC current range Frequency 4A,400A 4A-400A 40Hz to 1KHz

Ì Ì Ì Ì

Display hold Overload protection CE marked Includes two 1.5V `AA' batteries, carrying case and owners manual

23mm 63.5 (L) x 184.15 (W) x 38.1 (H)

231087

MeterCurrent, Source and Simulate The Fluke 787 ProcessMeter combines a DMM and loop calibrator in one. It has the ability to source, simulate and measure dc current with 1A resolution. The ProcessMeter has been designed for troubleshooting and calibrating current loop applications. It is EMI shielded, dust and splash resistant and has a removable battery door making it easy to change the battery without opening the meter. Supplied complete with protective yellow holster, TL75 test leads, AC70A alligator clips, 9V battery and user manual and quick reference H=187 (*201), W=87 (*98),D=32 guide.

(*52) *incl. holster

Jaw opening Dimensions

Mftrs. List No. 72-6185

Order Code 342-154538 S N

1+ 95.00

Standard Calibration UKAS Calibration

Price Each 3+ 85.00 Price Each 34.10 56.76

5+ 78.00

47

Pocket Size AC/DC Clamp Meter

This pock-size, multifunction, AC/DC clamp meter is just as much at home in the workshop as out on the road. Ì 33/4 digits LCD display Ì Pocket size Ì Auto power off Ì High speed bargraph Ì Up to 30mm jaw capacity Ì Zero function Ì Auto range Ì Data hold Ì IEC1010-1 CAT II 600V

Range 400mV, 4V, 40V, 400V, 600V 400mV, 4V, 40V, 400V, 600V 40A, 400A 40A, 400A 400, 4k, 40k, 400k, 4M, 40M Best Accuracy ±(0.8%+2) ±(1.0%+3) ±(2.5%+10) ±(2.0%+10) ±(1.0%+3)

381009.344485

Ì DMM and Loop calibrator in one tool Ì Min./Max./Average/Hold/Relative modes Ì Precision 1000V, 440mA digital multim- Ì dc 20mA current source/loop calibrator eter Ì Manual step, auto step, auto ramp Ì Measure both ac/dc volts, ac/dc current, Ì Clear LCD with backlight, 4,000 count, resistance, continuity and frequency 30,000 count for dc current Retrofit Kit: A refurbishment kit containing C81Y holster, DR80 display upgrade kit, TL71 premium test leads, AC72 alligator clip set F1 + F2 replacement fuses and Meter CleanerTM wipes.

dc/ac volts dc/ac volts dc mA Resistance Frequency Continuity 4000mV, 4V, 40V, 400V, 1000V 1A (0.44A continuous) 30mA 400R,4KR,40KR,4MR,40MR 199.99Hz, 1999.9Hz, 19.999KHz 100 dc current O/P dc current simulate Ext. 24V loop supply Current adjustment modes 0-20mA or 4-20mA 0-20mA or 4-20mA overanging to 24mA Manual: course, fine, 25% stepl Automatic: slow ramp, fast ramp, 25% step

H=195, W=64, D=30mm

Prices where indicated by a are subject to change. Please call your local sales office or visit www.farnellinone.com for the latest prices.

222498

DC Voltage AC Voltage DC Current AC Current Resistance

Mftrs. List No. Fluke 787 Retrofit Kit C101 Carry Case Standard Calibration Charge UKAS Calibration Charge

Order Code 892-96838 491-728538 947-978338

Price Each Order Code 428-333838 Standard Calibration UKAS Calibration S N 1+ 44.95 5+ 41.75 Price Each 34.10 56.76

Price Each 1+ 2+ 472.00 460.22 55.00 53.63 27.00 25.65 Price Each 45.13 S 71.21 N

5+ 441.81 52.15 25.00

Can't find what you're looking for?

Let our ProductFind team source it for you! Fast quotes for non-catalogue products from hundreds of manufacturers. Call now on 08701 200 200

Need more technical data?

Over 150,000 data sheets available online at www.farnellinone.co.uk

08701 200 200

Fax: 08701 200 201

www.farnellinone.co.uk

Prices exclude VAT Process Meter

FLUKE 789 The Fluke 789 ProcessMeter combines two tools frequently used by process technicians. It combines a true RMS digital multimeter and a loop calibrator in a single handheld tool, reducing the need to carry multiple instruments around. The meter features externally accessible fuses and battery for easy replacement. Meets 1000 volt EN61010-1 CAT III standards.

H=50, W=100, D=203 mm

The Fluke 725 Multifunction Calibrators are a versatile, easy to use field calibrators. Use the measure and source functions to test and calibrate almost anything. The 725Ex model is an ATEX compliant intrinsically safe version ideal for locations where explosive gasses may be present. Ì Rugged, reliable design stands up to field use Ì Easy to read measure/source screen lets you view input and output simultaneously Ì Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors and Transmitters Ì Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters Ì Support flow meter testing with frequency and CPM (counts per minute) functions Ì Perform fast linearity tests with auto step and auto ramp features Ì Power transmitters during test using loop supply with simultaneous mA measurement Ì Store frequently used test setups for later use Ì Backlight lets you work in poor light Ì Remote interface allows benchtop automated operations

Summary specifications (18°C to 28°C for one year) Function Measure or source Range Resolution Accuracy Voltage 0 to 100mV 0.01mV 0.02% Rdg + 2 LSD 0 to 10V (source) 0.01V 0 to 30V (measure) 0.01V mA 0 to 24 0.001mA 0.02% Rdg + 2 LSD mV -10.00mV 0.01mV 0.025% + of range + 1 LSD to + 75.00mV Resistance 15 to 3200 0.01 0.01 to 0.1 to 0.1 Frequency 1CPM to 10kHz 5 digits 0.05% + 1 count Loop supply 24Vdc N/A 10% Thermocouples J,K,T,E,L,N,U 0.1°C 0.7°C Thermocouples B,R,S 1°C to 1.4°C RTDs Ni120 (672) Pt 100, 200, 500, 1000 (385) Pt 100 (3916) Pt 100 (3926) Maximum voltage 30V Storage temp. -40°C to 71°C Operating temp. 10°C to 55°C Relative humidity 95%(10°C to 35°C); 75%(30°C to 40°C); 45%(40°C to 50°C); 35%(50°C to 55°C) Shock 30g, 11ms, half-sine shock (or 1 metre drop test) Vibration Random, 2g, 5-500 Hz Safety (Model 725) CSA C22.2 No. 1010.1:1994 Class B Safety (Model 725Ex) ATEX Ex (II 1G EEx ia IIB) 171°C KEMA 04ATEX 1303X, I.S. Class I, Div I Groups B-D, 171°C compliant Weight 650g Battery 4 AA alkaline batteries. Battery life; 25 hours typical Notes Max Load 1 mA

Ì 24V loop power supply Ì Very large dual display Ì Enhanced dacklight with 2 brightness settings Ì 1200 drive capacity on mA source Ì HART mode setting with loop power and a built-in 250 resistor Ì 0% & 100% buttons to toggle between 4 & 20mA sourcing for quick span check Ì Precision 1000V, 440mA true RMS digital multimeter

Ì Ì Ì Ì Ì Ì Ì

0.1% dc voltage accuracy 0.05% dc current accuracy Frequency measurement up to 20 kHz Min/Max/Average/Hold/Relative modes Diode test and continuity bleeper Simultaneous mA & % of scale readout 20mA dc current source/loop calibrator/ simulator Ì Manual step (100%, 25%, coarse & fine) plus auto step and auto ramp

Max load 1000

Squareware

Summary specifications Function Range Resolution Accuracy Current measurement 0 to 1A, ac or dc 1 mA 0.2% + 2 LSD (dc) 0 to 30 mA 0.001 mA 0.05% + 2 LSD Current sourcing 0 - 20 mA or 4 - 20 mA 0.05% of span (Drive Capability = 24V compliance or 1200 @ 20 mA) Frequency to 19.999 kHz 0.005% + 1 LSD Continuity Beeps for resistance < 100 Voltage measurement 0 - 1000V ac (true rms) or dc 0.1 mV - 1.0 V 0.1% Rdg + 1 LSD (Vdc) Resistance measurement to 40 M 0.2% + 1 LSD Diode test 2.0 V shows diode voltage drop Environmental specifications Operating temperature -20°C to 55°C Storage temperature -40°C to 60°C Humidity 95% up to 30°C (without condensation) 75% up to 40°C 45% up to 50°C 35% up to 55°C Temperature coefficient 0.05 x (specified accuracy) per°C (for temperatures < 18°C or > 28°C Safety specfications Electrical safety Overvoltage category Maximum voltage General specfications Weight Shock and vibration Battery Battery life Accessories included Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No. 1010.1-92 IEC 1010-1 CAT III 1000 V rms 600g Random, 2 g, 5-500 Hz 1 meter drop test 4 x AA alkaline batteries. 140 hours typical (measurement), 10 hours typical (sourcing 20 mA) AC72 aligator clips, 4 x AA 9V alkaline battery (installed), TL71 safety-designated test lead set, users manual & quick reference guide

Prices where indicated by a are subject to change. Please call your local sales office or visit www.farnellinone.com for the latest prices.

222577

48

Mftrs. List No. FLUKE 725 FLUKE 725EX C101 Carry Case Standard Calibration Charge S UKAS Calibration Charge N

Order Code 318-330038 947-988038 947-978338

1+ 1471.00 1882.00 27.00

Price Each 2+ 1434.29 1787.90 25.65 Price Each 86.25 118.84

5+ 1376.91 1735.00 25.00

Digital Current Calibrator

An easy to use portable, hand-held instrument for calibrating process devices. Ì Ì Ì Ì Ì Ì Ì Adjustable 0 to 24mA current source Current calibration drives load up to 500 2 ranges Large 13mm display Over input indication Includes owner manual, test leads and battery CE marked

Prices where indicated by a are subject to change. Please call your local sales office or visit www.farnellinone.com for the latest prices.

244205

Mftrs. List No. FLUKE 789 C101 Carry Case Standard Calibration Charge UKAS Calibration Charge

Order Code 427-003438 947-978338 S N

1+ 526.00 27.00

Price Each 2+ 512.87 25.65 Price Each 66.19 87.25

5+ 492.35 25.00

W = 78, D = 38, L = 185 Range 0 to 19.99mA, 0 to 24mA Power Resolution Accuracy 0.01mA,0.1mA ±(0.25% FS +1 digit), ±(0.5%FS + 1 digit) 9V PP3

230668

Multifunction Process Calibrator

725 and 725Ex

Mftrs. List No. 72-6694

Order Code 356-268238

1+ 75.00 S N

Price Each 3+ 69.00

Standard Calibration Charge UKAS Calibration Charge

5+ 62.00 Price Each 28.38 56.76

Advanced warning of obsolete products

Email notification of obsolete products straight to your inbox Replacements or upgrades recommended. Sign up now at www.rohs.info/productwatch

H=96 W=200 D=47

Order before 8pm for FREE next day delivery

Valid until 28th February 2007 Cable Locator

2042 Ì Ì Ì Ì Ì Ì Ì Easy to use Tough rubber armoured case Self contained protective cover Live circuit warning Auto power off Weatherproof to IP54 Digital display for MIT300, MIT310 and MIT320/330

300 Ì Ì

Ì Analogue needle display for MIT310A Ì MIT330 offers PC interface for storage and downloading Ì Hand-free use via neck strap Ì Intelligent safety system Ì EN61010-1 CAT IV 300V, CATIII 600V Ì Supplied with carry case

310 Ì Ì Ì 320/330 Ì Ì Ì 999M Ì Ì Ì Ì Ì Ì 600V Ì 310 A Ì Ì Ì

Features Insulation testing 250V 500V 1000V Test range Insulation limit alarm Continuity testing Continuity to 100 Continuity buzzer Lead null to 9 Adjustable buzzer 1-100 Audible buzzer disable Voltage measurement Volts AC/DC Resistance measurement 10 to 1M 10 to 2k Features Voltage warning Default voltmeter Digital display Analogue display PC interface (MIT330 only) Backlit display Locking test button 30min power off Switched test probe IP54 weatherproof Insulation Ranges Nominal test voltage Measuring Ranges All instruments Accuracy Continuity Ranges Accuracy Zero offset Continuity Buzzer MIT300, 310 MIT320/330 MIT310A 250V, 500V, 1000V 10k - 999M ±(3%+2)

H=190, W=85, D=50mm Weight=400g

Ì Ì Ì

Ì Ì Ì

Ì Ì <2

Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì

Tracing of cable in walls and locating interruptions and short circuits in cables Tracing of underground cables Locating of fuses and assignment to circuits Locating of concealed sockets and distribution boxes Locating of interruptions and short-circuits in unshield electrical underfloor heating Tracing of metal water and heating pipes General Information Set comprising of a transmitter and a receiver in a shockproof carrying case Transmitter with a LC-display for transmitting level, transmitting code and external voltage Receiver with a LC-display for level of receiving signal, code of receiving signal and live voltage indication Automatic or manual adjustment of sensitivity Acoustical receiving signal switchable Auto-Power-Off Backlight For all applications (live or dead cables) without additional instruments Safe locating via display of a specified letter on the receiver Additional torch lamp function for working in dark environments

LCD-Bargraph 12 to 400V (12V, 50V, 120V, 230V, 400V) 0 to 60Hz 125kHz Max. Voltage Measurement category Pollution Degree Power Supply up to 400V AC/DC CAT III / 400 V 2 6x 1.5 V, IEC LR6 batteries

600V

600V

Ì

Ì Ì

Ì Ì

Ì Ì Ì Ì Ì Ì Ì Ì

Ì Ì Ì Ì

Ì Ì Ì

Ì Ì Ì

Display Voltage Range Frequency Range Output signal

Resistance (MIT320/330 only) Ranges 10 - 1M Accuracy ±(5%+2) up to 100k Voltage Ranges 0 - 600V a.c. (50/60Hz) or d.c. Best accuracy ±(1%+2) Power Supply Batteries Rechargeables Battery life Dimensions Weight 8x 1.5V AA Batteries 8x 1.2V NiCd orNiMH cells 5000 consecutive tests 190x140x75mm 980g

339408.344498

The Cable Locator Kit includes: transmitter, receiver, 4 test leads, batteries, 2 crocodile clamps, 2 test probes, carrying case and user manual

Prices where indicated by a are subject to change. Please call your local sales office or visit www.farnellinone.com for the latest prices.

416554

0.01-99.9 (0-50 on analogue scale) ±(3%+2) 0-9 (and 0-2 for 310A) Operates at <5 Adjustable 1 to 50 Operates at <2

Mftrs. Description List No. Cable Locator Kit 2042 Additional Transmitter 2042T

Order Code 101-835238 101-835338

1+ 353.00 173.00

Price Each 3+ 319.60 156.63

49

5+ 306.82 150.37

Insulation and Continuity Tester

MIT300 Series

Mftrs. List No. MIT300-EN MIT310-EN MIT310A-EN MIT320-EN MIT330-EN

Order Code 754-381638 754-382438 754-383238 754-384038 754-385938 S N

1+ 215.00 282.00 244.29 299.00 349.00

Standard Calibration Charge UKAS Calibration Charge

Price Each 3+ 5+ 207.00 195.00 275.00 265.00 235.00 227.00 289.00 279.00 339.00 329.00 Price Each 28.38 56.76

10+ 187.50 246.75 213.75 264.00 304.68

Fast, flexible 24 hour ordering

Tel 08701 200 200 Fax 08701 200 201 eMail [email protected]

The Megger MIT300 series is an isulation and continuity tester that has applications in all aspects of domestic, commercial and industrial areas. The series includes four models, all of which offer automatic discharge of the circuit after testing, audible and visual warning if the test probes are applied to a live circuit, and a test inhibit feature which operates automatically under live circuit conditions.

08701 200 200

Fax: 08701 200 201

www.farnellinone.co.uk

MicroScanner Pro VDV Kit (MT-8200-24A)

Includes MicroScanner Pro, IntelliTone Probe, Wiremap/Coax/BareWire Adapters, Office/Room ID kit Verifies twisted-pair, coax and bare wire for continuity and all major miswires Measures length and distance to fault accurately with TDR (Time Domain Reflectometry) Recognizes hubs and active network tap speed and service type Tones cabling for quick location in walls, ceilings, or busy wiring closets Matches twisted-pair and coaxial cables to offices during moves, adds and changes

IntelliTone 200 Kit (MT-8200-60A)

Includes IntelliTone 200 Toner and 200 Probe, coax F connector adapter, two RJ11 and two RJ45 patch cables, test leads with alligator clips, lanyards, owners CD and quick start guide, two 9 volt batteries IntelliToneTM smart digital signal processing rejects noise and false signals Identifies, diagnoses, and troubleshoots datacom/telecom services Validates twisted-pair installation with visual end-to-end cablemap Audible, visual signal indication simplifies cable location in noisy environments Safely and effectively tones active networks

980-857438

£382.00

980-853138

£120.00

MicroMapper (MT-8200-49A)

Includes MicroMapper and MicroMapper Remote, patch cable, 6-volt alkaline battery and user guide Verify basic ethernet cabling integrity quickly and easily Tests twisted-pair cables automatically for continuity and all major miswires Speeds troubleshooting with easy-to-read pair-based LED fault indicators Identifies hidden cables clearly with powerful inductive tone generator Enables one-person testing of installed cables with separate remote unit

SimpliFibre Kit SC 8250-04

Includes LED light sources at 850nm and 1300nm, and meter with interchangeable SC connector adapter Tests multimode and singlemode fibre Measures optical power and loss at 850 nm and 1300 nm using the 850/1300 Source Measures optical power and loss at 1310 nm and 1550 nm using the optional 1310 Source and optional 1550 Source Auto senses source wavelength Document fibre with LinkWare PC data management and reporting software

980-863938

£82.00

980-869838

£1,128.00

CableIQ Qualification Tester MicroScanner Pro (MT-8200-32A)

Includes MicroScanner Pro, Wiremap Adapter, Coax Adapter (CATV type, F-connector) Verifies twisted-pair, coax and bare wire for continuity and all major miswires Measures length and distance to fault accurately with TDR (Time Domain Reflectometry) Recognizes hubs and active network tap speed and service type Tones cabling for quick location in walls, ceilings, or busy wiring closets Matches twisted-pair and coaxial cables to offices during moves, adds and changes Includes CableIQ with remote adapter, soft carrying case and four AA batteries Sees if your existing cabling can support voice, VoIP, 10/100/Gigabit Ethernet Troubleshoots why existing cabling plant can't support the desired network bandwidth Discovers what's at the end of any cable and displays device configuration (speed/duplex/pairing) Frees-up switch ports and identifies unused links Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap Tests all copper cabling media: twisted-pair, coax, and audio cabling Locates and traces cable with IntelliToneTM digital signaling technology

980-856638

£254.00

980-877938

£685.00

CableIQ Advanced IT Kit

Includes CableIQ with remote adapter, IntelliTone 200 Probe, six remote office IDs, rugged carrying case and four AA batteries Sees if your existing cabling can support voice, VoIP, 10/100/Gigabit Ethernet Troubleshoots why existing cabling plant can't support the desired network bandwidth Discovers what's at the end of any cable and displays device configuration (speed/duplex/pairing) Frees-up switch ports and identifies unused links Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap Tests all copper cabling media: twisted-pair, coax, and audio cabling Locates and traces cable with IntelliToneTM digital signaling technology

VisiFault

VisiFault Visual Fault Locator with 2.5mm universal adapter Bright red visible laser light source, features continuous and flashing modes Accelerates end-to-end fibre continuity checks Speeds fibre tracing and identification Aids in location of fibre faults including tight bends, breaks and bad connectors Connects to 2.5mm standard and 1.25mm SFF connectors

980-900738

£175.00

NetTool VoIP (includes Boot/Call log and VoIP monitor)

Solve IP phone, PC and network connectivity problems faster with NetTool. NEW! VoIP Model - Watch the phone boot, validate QoS configuration, log call control and monitor call quality metrics. Inline mode - Connect between two network devices, listen to the traffic between them and detect common connectivity problems. Automatically Ping key devices - Verify connection to routers, servers and printers Spot available network resources - See MAC and IP addresses, subnet and services offered by active servers, routers and printers Identify PC's network - Review list of services configured to a PC

980-878738

£1,036.00

NetTool Pro

Includes tester, serial cable, 4x AA batteries, wiremap adaptor, software and user manual on CD Quickly solve PC-to-network connectivity problems Verify network drops; link connectivity, speed, duplex settings, finds faults and cable length Ping, PoE voltage and reporting functions Identify PC network configuration devices used and problems Identify available network resources and services offered NEW! VoIP Model/Option - Watch the phone boot, validate QoS configuration, log call control and monitor call quality metrics.

980-887638

£1593.00

Fibre Viewers

Handheld microscopes used to inspect the ends of fibre-optic connections Ensures clean, smooth terminations ready for optical transmission Special safety filter to protect your eyes from harmful infrared rays FT120 offers 200X magnification suitable for inspecting single-mode fibres FT140 offers 400X magnification suitable for inspecting single-mode fibres

980-886838

£1,274.00

LinkRunner Kit

LinkRunner Extended Test Kit includes cable ID kit (#1-8), wiremap adapter, RJ-45 coupler, IntelliTone 100 Probe, clip set, NiMH battery pack, NiMH battery charger, custom carrying case, PC Inspector software and Key Device Watch software

FT120 FT140

980-901538 980-902338

£319.00 £319.00

Quickly troubleshoot network drops View Link, Length, Ping for each drop Link: Check PC drops for connectivity, speed and duplex settings Length: Checks cable configurations, finds faults and length Ping: Verifies connectivity to key network resources and PC NIC response

980-893038

£637.00

Prices exclude VAT Combined Loop and RCD Testers

LRCD200 Series Mftrs. Description List No. Loop/RCD Tester LRCD210-EN-BS Loop/RCD Tester LRCD220 2 Wire Test Lead Set 6220-784 Earth Bond Test Lead6231-586 Standard Calibration Charge UKAS Calibration Charge S N Order Code 1+ 108-622738 355.00 979-998238 375.00 108-623438 20.01 108-623538 35.10

419186.428555

Price Each 3+ 5+ 345.00 307.50 365.00 325.50 19.31 19.01 33.10 31.59 Price Each 58.87 86.25

Multifunction Installation Tester

MFT1500/2 Series The MFT1500/2 series combines all the essential features necessary for testing domestic, commercial and industrial fixed wiring in accordance with International Standards and National Wiring Regulations including BS7671 (16th Edition wiring regulations) and European Standard EN61557. The MFT1500/2 series features the patented Megger digital/analogue arc display. The analogue arc provides an indication of fluctuationg readings, while the digital readout provides the ability to record accurate results. The tester is available in two versions, the standard MFT1501/2 and the MFT1502/2 which includes useful additional facilities such as backlit display and range switches, an instrument and document carry case and the unque Megger illuminated switched probe. Illuminated Test Probe features: Ì Remote test button for single-handed testing Ì LED torch to illuminate the probe tip Ì Red/Green status LED Ì Voltage, Continuity, Insulation, Loop and RCD testing Ì Selectable touch voltage Ì Touch (fault) voltage and display Ì Calibrated earth loop test lead

W=148 H=203 D=78mm. Weight 980g

The latest generation of combined non-tripping loop tester and RCD test instruments that provide simple, affordable and flexible test tools forelectrical contractors testing energised circuits. The instruments are designed using the new Megger electrician's tester case, providing tough rubber armouring, built-in front cover, weatherproof to IP54 and easy-to-use functions and layout. The instruments can be hung around the neck or hand held and will not slip if placed on a bench or shelf. Test leads can remain attached with the front cover open or closed. L-N-E connection indicator LEDs show connection status and reverse polarity supplies. Two instruments are available: LRCD 210 This instrument provides three phase safe nontrip loop testing and 1/2I, I, and 5I RCD testing for standard, selective and DC RCDs. Suitable fordomestic installers testing to UK Part P requirements. LRCD220 As the LRCD210 with the addition of 110 V loop testing and 2 wire fast testing, plus phase to phase and phase to earth measurement andautomatic RCD testing with result recall. Ì Non-tripping Loop test. RCDs rated 30 mA or greater are not tripped by the loop test, even electronic RCDs Ì 3 wire low current non-tripping loop test provides measurements from 0.01 ohms to 2 kohms Ì RCD testing from 10 mA to 1000 mA Ì Auto RCD testing (LRCD220 only) Ì Extremely easy and safe to use Ì Built-in protective front cover Ì Tough Rubber armoured case Ì Weatherproof to IP54 Ì 3 year warranty

LRCD210 Loop Testing Non-trip loop test PFC calculation and display Single phase High current loop test Phase to phase 3-phase safe Voltmeter RCD Testing 1/2I, I and 5I RCD testing Touch / Contact voltage Selectable 25V / 50V touch voltage 10, 30, 100, 300 and 500mA ranges 1000mA RCD testing capability AC, AC selective, DC and DC selective RCD types Selectable phase 0 / 180 RCD ramp test (20% to 110%) General Testing Frequency Phase rotation Backlight Supports 230V operation Supports 110V operation Range 0 to 500 V 25 to 450Hz Range 0.01 to 9.99 10 to 99.9 100 to 999 1k to 2k Line / Earth (LRCD220 only) 0.01 to 9.99 High current loop test, 2-wire, 15mA to 1.4A 10 to 99.9 100 to 999 1k to 2k Line / Line (LRCD220 only) 0.01 to 19.99 100 to 480V, 45 to 65Hz RCD Test Ranges LRCD210 Ranges 10, 30, 100, 300, 500mA Supply voltages 207 to 280V, 45 to 65Hz RCD Test Accuracy No Trip Test (1/2I) Current Accuracy -8% to -2% Trip Time ±1% ±1ms Fault (Touch) voltage Range 0 to 50 V Power Supply 8 x AA alkaline batteries giving 2000 consecutive tests. Supply Voltage Measurements Voltage Frequency Loop Testing Line / Earth No Trip Loop Test, 3-wire, 15mA Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Accuracy ±2% ±2 digits ±1 Hz Accuracy ±5% ±0.03 ±5% ±0.5 ±5% ±5 ±5% ±30 ±5% ±0.03 ±5% ±0.5 ±5% ±5 ±5% ±30 ±5% ±0.03 LRCD220 10, 30, 100, 300, 500, 1000mA 100 to 280V, 45 to 65Hz Trip Test (I, 5I) +2% / +8% Accuracy +5% / +15% ±0.5V LRCD220 Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì W=85 H=150 D=235mm. Weight: 1.44kg

Ì Ì Ì Ì

Combined 16th Edition testing Guaranteed non-tripping loop test range Simple and intuitive to use Ergonomic design

52

Supply Voltage Range Voltage AC 0 - 500V 50/60Hz ±2% ±2 digits Voltage DC 0 - 500V ±2% ±2 digits Polarity indicated above 1kV Insulation Test Ranges Short circuit current <2mA 250V 0.01M - 99.9M 500V 0.01M - 299M 1000V 0.01M - 499M ±2% ±2 digits up to 99M 250V, 500V and 1kV into 1mA (BS7671, HD384 and IEC364) Output Voltage +20% - 0% rated load or less RCD Test Ranges Supply 100V - 270V 45Hz to 65Hz Ranges 1000mA, 500mA, 300mA, 100mA, 30mA, 10mA 1/2I - 1/2 times the selected RCD rated current Type I One times selected RCD rated currnet 5I Five times I RCD rated current RAMP A ramp test that displays actual trip current DC Sensitive A DC test current at I current Current Accuracy No Trip (1/2I) +0%, -10%. Trip (I) ±1% Trip Time Accuracy ±1% ±1ms

339058.428711

Mftrs. List No. UK Versions MFT1501/2 MFT1502/2 Euro Versions MFT1501/2 E MFT1502/2 E

Order Code 983-892938 102-363338 983-893738 983-894538

1+ 629.00 699.00 629.00 699.00

Price Each 3+ 615.00 675.00 615.00 675.00

5+ 550.00 615.00 550.00 615.00

FREE technical help

If you're an account holder, our trained engineers are here to help Tel 08701 200 202 Fax 08701 200 203 eMail [email protected]

Order before 8pm for FREE next day delivery

Valid until 28th February 2007 Insulation Testers

1503 and 1507

Insulation Tester

Fluke 1520

Fluke 1520 MegOhmMeter is a handy insulation resistance tester that also measures voltage and checks connections with its Lo-Ohms function.

W=100 H=203 D=50mm. Weight 550g

The Fluke 1503 and 1507 Insultaion Testers are compact, rugged, reliable and easy to use. With their multiple test voltages, they are ideal for many troubleshooting, commissioning, and preventative maintenance applications. Additional features, like the remote probe on these tools save both time and money when performing tests. Includes: remote probe, test leads, test probes, alligator clips, holster and user documentation. Ì Ì Ì Ì Ì Ì Ì Ì Ì Automatic calculation of both Polarisation Index and Dielectric Absorption Ratio Remote test probe for repetitive or hard-to-reach testing Live circuit detection prevents insulation test if a voltage larger than 30V is detected Make repetitive tests easy with Compare (Pass/Fail) functionality (1507 only) Auto discharge of capacitive voltage Auto power off Large backlit display EN61010-1 CAT IV 600V One year warranty

Ì Ì Ì Ì Ì Ì Ì Ì Ì

Ì Large, backlit LCD with analogue bargraph and digital display Ì Three output voltages for insulation resistance testing: 250V, 500V, 1000V Insulation resistance testing up to 4000M; switches automatically to voltage measurement when voltage is greater than 30V ac or 30V dc ac/dc voltage measurement up to 600V Lo-Ohms function for testing connections Last reading memory display 4 C-cell batteries for up to 5,000 tests per EN61557-2, with battery-life indicator and shut-off Auto discharge of capacitive voltage charges Rugged, splash-proof case with impact absorbing holster All inputs are protected to IEN61010-1 CAT III 600V and are compliant to EN 61557 VDE, UL, CSA approved

H = 241, W = 108, D = 72

Insulation resistance Test Voltage Ranges Resolution Test Current Accuracy Fluke 1503 500 V 0.1M - 20M, 0.01M, 0.1M, 1M 1mA at 500k ±(2% + 5 digits) 20M - 200M, 200M - 500M 1000 V 0.1M - 200M, 0.1M, 1M 1mA at 1M ±(2% + 5 digits) 200M - 2G Fluke 1507 50 V 0.01M - 20M, 0.01M, 0.1M 1mA at 50k ±(3% + 5 digits) 20M - 50M 100 V 0.01M - 20M, 0.01M, 0.1M 1mA at 100k ±(3% + 5 digits) 20M - 100M 250 V 0.01M - 20M, 0.01M, 0.1M 1mA at 250k ±(1.5% + 5 digits) 20M - 200M 500 V 0.01M - 20M, 0.01M, 0.1M, 1M 1mA at 500k ±(1.5% + 5 digits) 20M - 200M, 200M - 500M ±(1.5% + 5 digits) / 1000 V 0.1M - 200M, 0.1M, 1M, 100M 1mA at 1M 200M - 2G, >2G: ±(10% + 3 digits) 2G - 10G Function Range Resolution Accuracy Earth Bond Resistance Measurement Resistance 20R, 200R, 2kR, 20kR 0.01, 0.1, 1, 10 ±(1.5% + 3 digits) AC/DC Voltage Measurement Voltage 600 V 0.1 V ±(2% + 3 digits) General Specifications Operating Temperature -20°C to +55°C Batteries 4x AA batteries. Can perform 1000 insulation tests. Protection Standard IP40 Prices where indicated by a are subject to change. Please call your local sales office or visit www.farnellinone.com for the latest prices.

416604.429124

Function Insulation resistance Auto ranges

Range

Accuracy

Resolution

0.001 M to 10 M 4Mohms - 40Mohms, To 100 M: 2% 400Mohms - 4000Mohms + 2 counts over 1000 M: 10% + 2 counts +1%/G Test voltages 250V,500V,1000V +20%, -0% Max. measurement Current 1 mA Audible/visible voltage Warning >30V ac or dc Lo-Ohms Resistance 0 to 40 ohms 2% + 2 counts 0.01 Analogue bar graph 0 to 100 Audible/visual voltage Warning >30V ac or dc Resistance 0 to 40 ohms 2% + 2 counts 1 Analogue bar graph 0 to 100 Voltage Voltage 0 - 600V +2 counts 1V Operating Temperature: -10°C to +50°C Batteries: 0 to 100 Weight: 1.1kg Warranty: 3 years Included Accessories TL27 heavy duty test leads, TP74 lantern Tip test probes, AC86 large jaw alligator clips, protective holster with hand strap, carrying case, instruction manual. Prices where indicated by a are subject to change. Please call your local sales office or visit www.farnellinone.com for the latest prices.

231120

53

Mftrs. List No. FLK-1520/UK

Order Code 351-120038

1+ 388.00

Price Each 2+ 5+ 378.31 363.18

10+ 340.49

Mftrs. Description List No. Insulation Tester 1503 Insulation Tester 1507 Hard Carry Case C101

Order Code 101-835738 101-836138 947-978338

1+ 215.00 285.00 27.00

Price Each 3+ 5+ 209.64 201.25 277.88 266.77 25.65 25.00

+ -- -- -- -- -- --

SAVE MORE! The latest NEW products

1000's of new products added every month www.farnellinone.co.uk Ask us about volume discounts. Call us now on 08701 200 200!

08701 200 200

Fax: 08701 200 201

www.farnellinone.co.uk

Prices exclude VAT Multifunction Installation Testers

1650 Series

Digital Insulation Tester

72-6782 Ì Compact easy to read battery powered insulation tester Ì Wide measuring range Ì Built in over-input and low battery indication Ì Overload protection on all ranges Ì Sensitive ohm meter scale 0-200 for measuring low resistance circuits Ì Automatic zero adjust and circuit discharge Ì Includes instruction manual and alligator clips

Range 200M(500V) 1000M(1000V) 2000 Power Accuracy ±(3% +1d) ±(3% +1d) ±(1% +1d) Resolution 0.1M 1M 0.1

232197

The 1650 series tests continuity, insulation resistance, loop impedance, short-circuit current (PSC), RCDs and more. 1652: Performs all basic intallation tests including continuity/insulation/loop impedance, RCD tripping time, RCD truipping current level and RCD autotesting. 1653: As 1652 but with earth resistance and phase sequence measurement. Has internal memory and a PC interface for documentation and reporting.

DC 12V (8 x 1.5V AA batteries)

Mftrs. List No. 72-6782

Order Code 360-695838 S N

1+ 85.00

Ì Easy: simply turn knob, press the button and see results Ì Efficient: measure loop impedancewithout tripping RCDs, eliminating the need to bypass them Ì Rugged: withstands a one-meter drop for demanding field use Ì Safe: slim probe with test button keeps your eyes on the panel while probing hard to reach points Ì Comfortable: compact and lightweight (less than 1.2kg) for all day testing Ì Compliant: meets all relevant standards including EN 61557 and BS 7671 16th Edition IEE wiring regulations

1652 Measurement functions Voltage and Frequency Wiring polarity Insulation Resistance Continuity Loop & Line Resistance PFC/PSC (short-circuit current) RCD tripping time RCD tripping current level Automatic RCD test sequence Test DC-sensitive RCDs Earth Resistance Phase Sequence Indicator Other features Self-test EN61557*/VDE0413 compliant Illuminated display Line voltage indicator Battery indicator and battery test Memory, Interface Memory (500 measurements) Computer interface Time stamp (with FlukeView Forms) Software Ì Ì 250, 500, 1000V Ì Ì Ì Ì Ì ramp test Ì Ì 1653 Ì Ì 50, 100, 250, 500, 1000V Ì Ì Ì Ì Ì ramp test Ì Ì Ì Ì Ì Ì Ì Ì Ì

Standard Calibration Charge UKAS Calibration Charge

Price Each 2+ 73.00 Price Each 34.10 56.76

5+ 62.00

Battery Tester

GOLD-IBT

54

Ì Simulates full battery discharge test in seconds Ì Tests 12Volt SLA and Car batteries from 1.2Ah - 200Ah Ì Automatically displays Ambient Temperature, DC Voltage and Ampere hour Capacity available Ì Warns if battery voltage is too high or low Ì Table indicates when batteries need to be recharged or replaced Ì Quick, accurate and easy to use Battery manufacturers recommend to recharge or replace the battery when the rated ampere-hour (Ah) capacity falls below 65% - but multimeters are only capable of measuring terminal voltage. The new GOLD-IBT Intelligent Battery Tester is designed to simulate a full battery discharge test in seconds. Programmed to test 12Volt SLA and car batteries from 1.2Ah - 200Ah, this product automatically displays ambient temperature, DC voltage and Ampere-hour capacity available in the battery. It's quick, accurate and easy to use and identifies batteries that need to be recharged or replaced according to prevailing conditions - irrespective of how long they have been in use. The Intelligent Battery Tester works by applying a pulsed frequency to the battery under test. The neutral net software analyses the chemistry of the battery during this process and provides a direct reading in Amps/Hr.

Operating voltage Battery type Battery size 12VDC(10-15VDC) SLA (sealed lead acid) and car batteries 1.2Ah - 200Ah Repeat test capability Dimensions (HxWxD) Weight Up to 15 continuous tests 110x55x35mm 400g

347809.364412

Ì Ì Ì Ì Ì

Ì Ì Option

Prices where indicated by a are subject to change. Please call your local sales office or visit www.farnellinone.com for the latest prices.

339462.343939

Description

Mftrs. List No.

Order Code 491-706638 491-707838 491-708038 491-709138 491-710838 483-275938 483-276038 491-713338 491-714538 491-715738

1+ 779.00 987.00 536.00 739.00 939.00 63.00 31.00 59.00 79.00 111.00

Price Each 3+ 669.65 848.45 499.15 688.20 874.46 -- -- -- -- 54.95 73.57 103.37

5+ 629.67 797.80 485.29 669.09 850.17 -- -- -- -- 53.41 71.53 100.50

UK Versions Installation Tester 1652 Installation Tester 1653 Euro Versions Installation Tester 1651-05 Installation Tester 1652-05 Installation Tester 1653-05 Accessories Earth Spike Kit ES165X Test Probe - RemoteTP165X Test Lead Set TL165X STD Test Lead Set TL165X FUSED Fused PC Software FVF-SV2

Mftrs. List No. GOLD-IBT

Order Code 782-009738

1+ 175.00

Price Each 3+ 160.00

10+ 145.00

Fast, flexible 24 hour ordering FREE technical help

If you're an account holder, our trained engineers are here to help Tel 08701 200 202 Fax 08701 200 203 eMail [email protected] Tel 08701 200 200 Fax 08701 200 201 eMail [email protected]

Order before 8pm for FREE next day delivery

Valid until 28th February 2007 Voltage Detector

1AC-II VoltAlert

Voltage and Continuity Testers

T100 Series

Senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage. Ì VoltbeatTM technology and continuous self-test -- so you always know it's working Ì Upon detection, tip glows and beeper sounds Ì Compact design fits easily into pocket Ì Easy to use - just touch the tip to an outlet or cable Ì Operating range 200 V to 1000 V AC Ì EN61010-1 CAT IV 1000 V for added protection Ì Agency approvals: CE, CSA, C-tick, TUV/ GS Ì Rugged casing protected to IP40 standard Ì Two-year warranty

Prices where indicated by a are subject to change. Please call your local sales office or visit www.farnellinone.com for the latest prices.

416579.429123

Type Order Code 1AC-II Volt Alert 101-835638

1+ 16.00

Price Each 3+ 15.29

W=240 H=56 D=34mm. Weight 180g

10+ 14.89

Voltage Tester with LED Flashlight

LVD1 A portable flashlight with exclusive dual-sensitivity voltage detector, delivered in a 5 piece eye catching counter display. Ì Bright white flash light illuminates working area Ì Blue indicator means you're close Ì Red indicator means you're at the source Ì Detects voltage from 40V ac upwards Ì Comes with a versatile clip to secure light to a pocket, hat or even a panel door

Voltage range Operating temperature Bulb life Power L=245, W=195, D=233mm Weight=750g Prices where indicated by a are subject to change. Please call your local sales office or visit www.farnellinone.com for the latest prices.

339575.409236

Ideal for site conditions, the 3 models of the T100 Series 2-pole testers have a rugged construction and ergonomically formed housing for perfect handling. All models offer a patented three-phase rotation detection system providing quick phase rotation indication. Moreover they have a special electrical torch function for working in low light level environments and have an ingress protection rating of IP65. The T100 Series are compliant with EN 61010-1 and EN61243-3 requirements. T100: Ì 12 LED display Ì Voltage test Ì Optical and acoustical continuity test Ì Rotary field indication Ì Single pole test for phase detection Ì Indication of polarity Ì Torch function T120:

Measuring Ranges Voltage AC/DC Continuity Frequency Phase rotation Resistance measurement (T140 only) Response time General, Safety and Environmental Specifications Operating Temperature Safety Rating

All features as T100 plus: Ì 3.5 digit LCD display Ì LED Bargraph T140: All features as T120 plus: Ì Resistance Measurement Ì Backlight

55

40V to 300V a.c 0 to 50°C 100 000 hours 1x AAA battery (supplied)

12 - 690 V 0 - 400 k 0 - 400 Hz 100 to 690 V Up to 1999 <0.1 s -10°C to 55°C EN 61010-I Cat. IV 600 V

Mftrs. List No. LVD1

Order Code 800-220738

1+ 12.00

Price Each 10+ 11.70

50+ 11.53

Prices where indicated by a are subject to change. Please call your local sales office or visit www.farnellinone.com for the latest prices.

413490.411571

Mftrs. List No.

Description

Order Code 921-011338 921-012138 921-013038 921-014838 921-015638 921-016438 428-361238

1+ 37.00 59.00 69.00 37.00 59.00 69.00 11.22

Price Each 3+ 35.60 57.41 67.13 35.60 57.41 67.13 11.01 34.10 56.76

5+ 34.10 54.95 64.26 34.10 54.95 64.26 -- --

T100/UK Tester T120/UK Tester T140/UK Tester Euro Versions T100 VDE Tester T120 VDE Tester T140 VDE Tester C33 Carry Case

Advanced warning of obsolete products

Email notification of obsolete products straight to your inbox Replacements or upgrades recommended. Sign up now at www.rohs.info/productwatch

Standard Calibration Charge S UKAS Calibration Charge N

Can't find what you're looking for?

Let our ProductFind team source it for you! Fast quotes for non-catalogue products from hundreds of manufacturers. Call now on 08701 200 200

08701 200 200

Fax: 08701 200 201

www.farnellinone.co.uk

Prices exclude VAT Electrical Testers

T5 Series

Voltage range Sensitivity Altitude RH Operating temp Response time Battery type 220 - 230 Volts AC, or 90-1000V for IN02470 Indicator will illuminate at 4mm distance of a 2.5mm2 conductor carrying 220V <2000m 80% @ 30°C, 50% @ 40°C -20 to +50°C Instantaneous 2x 1.5V AAA (supplied)

381017.267944

Price Each Description Black 230V Yellow 230V ATEX blue 230V ATEX blue 110V Order Code 838-859838 838-860138 838-861038 838-862838 1+ 11.50 11.50 19.25 19.25 5+ 10.50 10.50 17.91 17.91

USB Voltage Data Logger

EL-USB-3 ACC-T5-KIT T5 Series Accessory Kit: A complete accessory kit for use with the Fluke T5 Series Electrical testers. Ì TP220 SureGripTM Test probe Set Ì AC285 SureGripTM Large Jaw Alligator Clip Set Ì C33 Soft Meter Case Ì Ì Ì Ì Integral test leads and probes Automatic selection Continuity and bleeper function T5 electrical testers for continuity/ohms and current measurements Ì 2 versions available T5-600 rated to 600 volts ac/dc T5-H5-1AC Tester Kit contains: Ì T5-1000 Electrical tester Ì H5 holster Ì 1AC VoltAlert voltage detector Ì T5-1000 rated to 1000 volts ac/dc Ì New open jaw technology for fast current measurement up to 100 amps ac, with 0.1 amp resolution Ì Continuity and bleeper function Ì Sleep mode when not in use

L=112, W=27, D=27mm

EL-USB-3 measures and stores voltage readings from power supplies, sensors or other sources. User settable logging rate, start-time and alarms and the downloads are stored via a PCs USB port. Software requires Win 98/2000 or XP and allows voltage data to be graphed and printed. Ì Ì Ì Ì 32 000 readings Screw terminal connection 2 user programmable alarm thresholds Status indicated by flashing red and green LED

0 to 30V d.c. 100mV d.c.

1AC VoltAlert voltage detector Ì Pocket size voltage detector Ì 200-600 Volts ac Ì All outer surfaces are non conductive Ì Detects voltage without metallic contact Ì EN61010-1 CAT III 600V

T5-1000 1000VV 1000VV 100A 1000R 2

Ì User selectable measurment unit and scaling factor Ì Supplied with battery and software

56

Volts ac max Volts dc max Current ac max. Max resistance Ohms Cat III rating

T5-600 600V 600V 100A 1000R 2

Measurement range Internal resolution

Accuracy Logging rate

±1% 1 sec to 12 hours

381903.381933

Mftrs. List No. EL-USB-3

385804

Order Code 852-290138

1+ 35.98

Price Each 5+ 10+ 31.62 30.23

25+ 29.62

are subject to change. Please call your local sales office or visit Prices where indicated by a www.farnellinone.com for the latest prices.

4-20mA Current Loop USB Data Logger

EL-USB-4 Measures and stores up to 32,000 current loop readings over a 4-20mA d.c. measurement range. The user can easily set up the logging rate and start time, and download the stored data by plugging the module into a PC's USB port and running the supplied software. The data can then be graphed, printed and exported to other applications. Correct functioning of the Length = 112mm Ø27mm unit is indicated by a flashing red and green LED. The data logger features a pair of screw terminals and is is supplied complete with a set of measurement leads terminating in crocodile clips. 4-20mA d.c. Current Loop Measurement Range Stores 32,000 readings Supplied software supports Windows 98SE/2000/XP USB Interface for Set-up and Data Download User-Programmable Alarm Thresholds Red and Green LED Status Indication At least one years continuous operation from supplied lithium battery

4 - 20mA dc ±1% Logging Rate Operating Temperature Range min: every 1s max: every 12h -35 to 80°C

415819.428946

Mftrs. List No. T5-600 T5-1000 Holster ACC-T5-KIT T5-H5-1AC KIT C101 Carry Case

Order Code 184-34238 184-35438 874-16438 491-727338 835-366238 947-978338 S N

1+ 82.00 89.00 13.00 22.00 102.00 27.00

Standard calibration charge UKAS calibration charge

Price Each 2+ 5+ 76.36 74.25 82.88 80.58 12.68 12.17 21.45 20.59 94.99 92.35 25.65 25.00 Price Each 34.10 56.76

Volt Stick Voltage Tester

The Volt Stick is an instrument for quick testing the presence of AC voltage, without metallic contact. It can be used for testing cables, sockets, switches etc. By simply touching the area with the tip, the Volt Stick indicates voltage presence by its glowing tip. Intrinsically safe ATEX versions for use in hazardous areas such as chemical plants, oil refineries and off shore rigs are also available. Ì Ì Ì Ì Ì Ì Ì

Measurement Range Accuracy (overall error)

H=145, W=20, D=18mm Weight = 35g

Ì Locate breaks in cables Ì Detect blown fuses inside plugs of fuse holders Ì Distinguishes between live and neutral in single and three-phase supplies Ì Identifies voltage-carrying cables injunction boxes

Ì Identifies faulty in-line switches Ì Locates faulty lamps in series connections Ì Red light in the tip to indicate voltage Ì Fully insulated for safe use

Mftrs. List No. EL-USB-4

Order Code 100-615838

1+ 40.10

Price Each 5+ 10+ 37.42 34.54

25+ 32.07

FREE technical help

If you're an account holder, our trained engineers are here to help Tel 08701 200 202 Fax 08701 200 203 eMail [email protected]

Order before 8pm for FREE next day delivery

visit our website for more information on these products www.farnellinone.co.uk

Prices exclude VAT Handheld PAT Tester

Primetest 50 An easy to use, portable appliance checker offering the same lightness and portability as its bigger brothers, but with a much simplified range of tests. Simply choose the test you require; earthed appliance, double insulated appliance, or mains cord testing. The simple display shows whether it's a pass or fail. With the optional PATGuard Workabout software (121-2660) you can record the latest test result information into a PDA. The rugged outer casing will stand up to anything a normal working environment has to offer. A great choice for those needing a reliable, easy to use, portable safety tester.

Power Socket Test Input Voltage Range Voltage indications Physical Power

230V +10%,-15% AC Phase to earth, Phase to neutral 6x AA batteries (supplied)

440477.436829

Mfrs. List No. Primetest 100

Order Code 121-265138

1+ 350.00

Price Each 2+ 330.00

5+ 299.00

Handheld PAT Tester

Primetest 220 Compact and full of great features. First of all there is no need to continuously plug and unplug cables because it is battery powered, giving you the freedom to move quickly from job to job. Next up is the large LCD display that offers easy layout. Add to that a comprehensive test list that features Class I and Class II testing, IT equipment testing and circuit testing. Ì Hand-Held - Highly Portable Ì Battery Powered Ì Comprehensive Testing Ì Large LCD display

W=100 H=260 D=55mm. Weight 800g Earth Continuity Test current Pass / Fail Threshold Insulation resistance Test voltage Pass value IEC Lead Test Tests Performed ±200mA DC 0.2 500V DC 2M Earth Continuity Insulation resistance Live, Neutral Continuity and Polarity 230V +10%,-15% AC Phase to earth, Phase to neutral 6x AA batteries (supplied)

440476.436826

W=100 H=260 D=55mm. Weight 800g Earth Continuity Test Current Display Range Pass Value Insulation Resistance Test Voltage Display Range Pass Value ±200mA DC 0 - 19.99 0.2 500V DC 0.01M - 199M 2M

Power Socket Test Input Voltage Range Voltage indications Physical Power

Mfrs. List No. Primetest 50

Order Code 121-265038

1+ 275.00

Price Each 2+ 250.00

5+ 225.00

58

Handheld PAT Tester

Primetest 100 An ideal choice for those looking for an easy to use, comprehensive unit. Simply pushing a button will give you the option of PAT Test mode, Class I and II, IEC Lead test mode or Power Socket mode. To further add to its easy operation, a bright display shows the test results values as well as a PASS or FAIL indication. It is battery powered to help users be quicker and more efficient in their work. With the optional PATGuard Workabout software (121-2660), asset information can be recorded on-site for storage in a PAT test record database. Ì Easy to use Ì Compact, rugged enclosure Ì Simple push button test action Ì Test Class I and II equipment including IT and business equipment Ì Differential Leakage test Ì Extension and IEC lead tests Ì Power socket polarity Ì LCD display giving clear pass/fail indication Ì Supplied with test lead, IEC lead, instruction manual and deluxe carry case with shoulder strap

Protective Conductor Current Test Voltage 230 V Display Range 0mA - 19.99mA Pass Value 0.75mA Touch Current Test Voltage Display Range Pass Value IEC Lead Test Tests Performed 230 V 0.1mA - 3.5mA 0.25mA Earth Continuity Insulation resistance Live, Neutral Continuity and Polarity 30mA 0° / 180° auto switched 0ms - 500ms Non-Tripping for > 30mA RCD 0 - 199 230V +10%,-15% AC Phase to earth, Phase to neutral 6x AA NiMH rechargeable batteries (supplied)

440478.436832

RCD Trip Time Test Current Test Current Phase Display Range Earth Loop Resistance Test Current Display Range Power Socket Test Input Voltage Voltage indications Physical Power

Mfrs. List No. Primetest 220

Order Code 121-265238

1+ 399.00

Price Each 2+ 375.00

5+ 325.00

W=100 H=260 D=55mm. Weight 800g

Combination / PAT Tester

PrimeTest 100 Ì Two electrical safety checks in one tester Ì Checks appliance safety and socket safety Ì Simple push button test sequence for Class I, Class II, Leakage and Lead tests Ì Compact, rugged enclosure Ì Simple push button test action Ì Test Class I and II equipment including IT and business equipment Ì Differential leakage test Ì Extenesion and IEC lead tests Ì Power socket polarity Ì LCD display giving clear pass/fail indication Ì Supplied with test lead, IEC lead, instruction manual and deluxe carry case with shoulder strap

Earth Continuity Test current Display Range Pass Value Insulation Resistance Test voltage Display Range Pass value IEC Lead Test Tests Performed

±200mA DC 0 - 19.99 0.2 500V DC 0.2M - 19.99M 2M Earth Continuity Insulation resistance Live, Neutral Continuity and Polarity 40V AC Nominal 0.1mA - 19.99mA 0.75mA 40V AC Nominal 0.1mA - 19.99mA 0.25mA

Equivalent Leakage Class I Test voltage Display Range Pass value Equivalent Leakage Class I Test voltage Display Range Pass value

Order before 8pm for FREE next day delivery

Valid until 28th February 2007

The PrimeTest 100 is a combination tester with the functionality of a PAT tester, an IEC lead and extension lead tester and a power socket checker all in one easy-to-use instrument.

Earth Continuity Test current Test duration Measurement accuracy Pass value Insulation resistance Test voltage Accuracy Test current Measurement accuracy Test duration Pass value Differential Leakage Test voltage Load current Test duration Measurement accuracy Pass value IEC Lead Test Test voltage Test duration Test Power Socket Test Input voltage range Voltage indication

222562

Mftrs. List No.

10A rms nominal 2s nominal 5% 0.2 500V DC +20%, -0% 1mA into 500k <2mA short circuit 5% 2s nominal 2M 230V±10% 10A max 30s max 10% 3.5mA CLI, 0.25mA CLII 7V nominal 2s nominal Live, neutral checks for o/c, s/c and crossed 230V ±10%, 50/60Hz Phase to earth, Phase to neutral, Neutral to earth potential

382574.410849

Order Code 121-265638 505-406038 505-405938 814-918638

1+ 1095.00 1950.00 495.00 1095.00

Price Each 2+ 995.00 1900.00 485.10 995.00

5+ 950.00 1750.00 467.11 950.00

UK Version Supernova Plus SUPERNOVA+ TIS KIT PATGUARD PLUS Plus Software EURO Version Supernova Plus

PAT Software

Mftrs. List No. PRIMETEST 100

Price Each Order Code 859-048638 1+ 350.00 3+ 338.35

Portable Appliance Tester

Supernova PLUS A comprehensive PAT tester with full graphics display and a fold up design for easy carriage. The unit has a range of innovative features to aid the user to easily test and document a wide variety of portable equipment. The Supernova Plus is a dual voltage tester, with Flash Test capability, that is capable of testing IT equipment. The features of this enhanced model ensure that the Supernova Plus unit allows you to test any appliance, with any supply, giving you absolute flexibility in your testing procedure. To enable test operators to determine progressive deterioration or potential faults in the equipment under test, the Supernova Plus incorporates specially developed software that compares successive test results taken on the same item of electrical equipment. Ideal for those looking for a comprehensive dual voltage tester, which offers true dual voltage testing to test any load from any power source.

PATGuard Lite This is an entry level software package facilitating the quick and effective downloading of test information and certificate printing. It's ideal for those requiring quick, basic testing. PATGuard Lite provides records and documentation to support PAT testing and enables the user to quickly and effectively download test results, even if they only have limited training. The low cost software package uses Windows-based management of information so it;s easy to learn and you can hook your tester to your PC to download directly into PATGuard. Ì Automatic record generation Ì Icon style display Ì Most PAT downloads accepted (all Seaward) Ì Database compatibility across the range Ì Compatible with PATGuard WorkAbout PATGuard Pro This is a comprehensive software package and is ideal if you require detailed asset management information. It enables you to capture more information from the PAT tester as well as storing more information on the appliance history. The vast range of reports and clear identification of items in need of re-testing allow you to access more information on your test record, quickly. One of its key features is its fast download as the tester can be hooked to your PC for direct downloading. PATGuard Pro uses Windows-based management of information so it's easy to learn how to use it. Includes all the faures of PATGuard Lite plus: Ì Excel & Acrobat reports Ì Network enabled Ì Automatic re-location of assets Ì Full test history Ì Asset tracking PATGuard Elite A top of the line software package that is ideal for companies that PAT test on a regular basis. It provides you with quick and easy, complete management of the PAT testing process. One program provides the total solution from the first test, through downloading test results, certificates, planning re-tests and uploading. It's simple to use extensive features include clear re-test identification, optional email alerts for re-testing, and an extensive range of reports that help to increase the speed of your business. It connects directly to your tester and is fast to upload and download. PATGuard Elite uses Windows-based management of information so it is easy to learn how to use it. Includes all the faures of PATGuard Pro plus: Ì Drag & Drop for asy re-location Ì PATGuard viewer program generator Ì Full Seaward PAT upload capabilities Ì Automatic re-test scheduler Ì Customised email safety alerts Ì Full range of printed reports PATGuard Workabout Testers can quickly and easily record results via their PDA with this specifically designed software package. It offers simple and easy test recording and can record results from any tester directly into a PDA to store for later use. The remote off-site working gives you the freedom and flexibility to work smarter during the actual testing. It uses familiar Pocket PC interfaces combined with PATGuard's Windows-based test record management so its easy to learn in minutes. PDA and mobile technology will enable you to email PAT test records before the test and also the results after the test. Ì Direct Input of assets, tests and inspections Ì Use easily transfered files Ì Displays PATGuard records on a PDA Ì Direct download and upload to tester Ì Allows mobile working Ì Fully compatible with all PATGuard software

59

W=320, H=160, D=400mm. Weight 9.5kg

Ì Accurate Earth Bond and Leakage Measurements even when multiple Earth Paths exist Ì Multi Voltage In/Multi Voltage Out Ì Up to 5000 Memory Locations containing appliances sites, locations, user, test status and date Ì Polarity Lead Test Capability Ì Tests Information Technology equipment Ì Real time clock and non-volatile memory Ì Capable of printing barcode labels in conjunction with a thermal printer Ì Connects to PC, barcode reader, Brain Cells Scanner and printer Ì Auto test code generation Ì User defined help screens Ì Superfast download up to 10 times quicker than existing testers Ì Modem capability Ì Two serial ports (plus parallel port) to use bar code scanner and printer together Ì Earth limit calculator Ì Automatic generation of appliance IDs Ì Single screen visual test

Supernova is supplied complete with: Earth bond test lead, Flash probe and 230/110V adaptor. TIS Kit: The Supernova Plus is also available with TIS Kit that includes: Ì Patguard Plus software Ì Test 'n' Tag kit Ì Patguard Plus support contact Ì Guide to PAT testing Insulation Test Test voltage Measuring range Resolution Accuracy Pass Levels 250V, 500V DC 100k -100M 0.01M ±5% of reading ± 2 digits (100k - 20M) Selectable Accuracy Pass Levels Leakage Range Resolution Accuracy ±10% of reading ±2 digits 1.00 - 20mA Selectable 0.1mA - 10.0mA 0.01mA ±5% of reading ± 2 digits

Substitute Leakage Test Test Voltage 40V ac o/c Display Range 0.1 - 20.0 mA ac Resolution 0.01mA

Touch Leakage Range 0.1mA - 2.0mA Resolution 0.01mA Accuracy ±10% of reading ± 2 digits Pass levels Selectable

08701 200 200

Fax: 08701 200 201

www.farnellinone.co.uk

Prices exclude VAT

440482.436842

Mfrs. List No. PATGuard Lite PATGuard Pro PATGuard Elite PATGuard Workabout

Order Code 121-265738 121-265838 121-265938 121-266038

1+ 149.00 399.00 549.00 195.00

Price Each 2+ 135.00 365.00 525.00 179.00

Exclusive to Farnell InOne - Massive Savings

MicroMapper and Industrial Label Printer Bundle

5+ 130.00 345.00 475.00 169.00

Network Cable Analyser

Atlas IT The amazing Peak Atlas IT represents a revolution in network cable testing in terms of speed, size, ease of use and features. Simply connect one end of your network cable to the Atlas IT and the other end to the Atlas Terminator and press the test button. Within seconds, the display verifies the cable and identifies it as either a Straight Through (PC-Hub type) or a Cross-Over (PC-PC type). Additionally, the Atlas IT detects problems such as missing, shorted or wrongly wired connections, clearly highlighting this on its scrollable display. The Atlas IT can even be used as a quick reference guide: wiring instructions can be displayed on-screen when not testing cables, and battery life is extended with its automatic switch-off feature, if not used for more than 30 seconds. Ì Automatic identification os StraightThrough patch cables Ì Automatic identification of Cross-Over cables Ì Automatic analysis of above cable types Ì Analyses all 8 lines of cable Ì Fault identification and highlighting for the following faults --Short Lines --Open Lines --Swapped Lines Mftrs. List No. ATLAS IT ATC55 Ì Display of cable-making instructions when not testing cables Ì Can test plug-plug, plug-socket and socket-socket Ì Support for up to 150m (500ft) of cable Ì Miniature Atlas Terminator, ideal for use in tight spaces Ì Clear and user-friendly scrollable display Ì Spare battery and spare Atlas Terminator supplied

232307

Professional results efficiently and easily delivered - saving time and money. Fluke Networks MicroMapper: Ì A compact, handheld cable tester and toner designed for network professionals Ì Quickly and easily verifies the integrity of an Ethernet twistedpair cabling installation giving you visibility of opens, shorts, crossed, reversed and split pairs Ì Includes a Micromapper and MicroMapper remote, RJ45 patch cable, owners CD and quick start guide and 4 x AAA alkaline batteries T107M Industrial Label Printer:: Ì Creates fast and easy, high-quality labels at the touch of a button thanks to the unique HOT KEY functionality Ì No more complicated menus saving time and money Ì Wrap quickly creates a cable marker - enter the diameter of the cable and the length of label is automatically calculated Ì Panel creates one long patch panel label with text perfectly centred over all ports by entering the pitch distance Ì Fixed creates labels for face plates, outlets, racks

Description Cable Analyser Carry Case

Order Code 388-293738 521-551138

1+ 79.00 12.84

Price Each 5+ 73.00 11.55

10+ 68.00 10.40

60

Enhanced Network Cable Tester

A quick network cable tester to verify the correct wiring, continuity and polarisation of 10Base-T (UTP/STP), EIA/TIA-568B, 356A and Token ring modular RJ45 network cables. By using the remote terminator, the unit allows cables to be tested before and after installation. Powered by 1x PP3 type battery - not supplied Ì Ì Ì Ì Test 10-Base-T(UTP/STP), EIA/TIA-568B, 356A and Token ring cabling LEDs indicate the status and connections of the cables Tests shielding Supplied with soft carry case

249558

Save over £85 / g110 while stocks last

- price when bought separately £168 / g258

440739

Price Each Description MicroMapper / Printer Bundle Order Code 121-859238 1+ 82.00 + -- --

Mftrs. List No. 3PK-NT008

Price Each Order Code 433-885638 1+ 36.07 5+ 33.62

701 KIT Classic Tone and Probe Kit

The 701Kit is recognised by technicians around the world as the indusry standard for cable and wire identification. The kit can be used to identify single conductors or cables within a bundle, at a cross connect pointer on any conductive material. The Kit Includes: 77HP high power tone generator, 200EP Inductive amplifier and sturdy polyester carry case. Ì Amplifier can be used with any tone generator Ì Polarity testing Ì Continuity testing Mftrs. List No. 701K Ì Ì Ì Ì Talk battery supply Selectable warble tone 3-colour LED (identifies AC ring voltage) Weather resistant design

339889.267524

Can't find what you're looking for?

Let our ProductFind team source it for you! Fast quotes for non-catalogue products from hundreds of manufacturers. Call now on 08701 200 200

Order Code 506-316438

1+ 69.20

Price Each 5+ 67.36

10+ 67.36

Order before 8pm for FREE next day delivery

Choose Fluke for

Thermal Imaging

The Fluke Ti20 thermal imager is easy to use, and represents a breakthrough in price/performance for front-line industrial maintenance professionals.

Built for the tough industrial environments, the Fluke Ti20 displays a rich visual image of surface temperatures, allowing fast safe checks for hot spots, often an indication of impending failure. · Instantly provides non-contact, detailed temperature images · Fully radiometric, with image plus measurement data · Extremely easy to use · Complete solution, fully functional software included · Supports periodic inspections with on-screen route guidance · For industrial use: IP54 rated, measures up to 350°C

Model Order Code Price Each

NEW

Fluke Ti20 Thermal Imaging Camera 122-556438

£3,750.00

Screen image

Choose Fluke for

Non-contact Temperature Measurement

Fluke non-contact infrared thermometers are light, rugged and easy to use, the perfect choice for a host of troubleshooting applications where temperature is a critical symptom. Ideal for measuring hard to reach, electrically live or particularly hot targets.

Contact & Non-Contact - Fluke 561 Designed for a wide range of temperature applications, the Fluke 561 combines both contact and non-contact temperature measurement in a single, lightweight and easy to carry package. The Fluke 561 has accurate infrared temperature measurement (±1%) with type K thermocouple measurement. · Two in one thermometer IR and K type thermocouple · Velcro pipe probe included · Laser sighting · Distance to spot size 12:1 · Compatible with standard K type probes

Non-Contact ­ Fluke 62 If you are looking for a basic non-contact thermometer for a variety of applications, the Fluke 62 mini infrared thermometer is the tool for you. It is priced to fit any toolbox and is small enough to fit in your pocket. · Temperature range -30°C to 500°C · Distance to spot ratio 10:1

NEW

Order Code Price Each

Model

Fluke 62 IR Thermometer Fluke 561 IR + K Type Thermometer

947-981338 121-879338

£67.00 £99.00

Prices exclude VAT Digital Thermometers

Fluke 51II/Fluke 52 II 51 and 52 Series II: Ì Large backlit dual display shows any combination of T1, T2 (52 only), T1-T2 (52 only) plus MIN, MAX, or AVG Ì Relative time clock on MIN, MAX, and AVG provides a time reference for major events Ì Electronic Offset function allows compensation of thermocouple errors to maximise overall accuracy Ì Measures J, K, T and E-types of thermocouples Ì Readout in °C, °F, or Kelvin (K) Ì Sleep mode increases battery life Ì Battery door allows easy battery replacement without breaking the calibration seal Ì Optional Tool Pak accessory for hanging your thermometer (302-9578) The new Fluke 50 Series II contact thermometers offer fast response and laboratory accuracy (0.05% +0.3°C) in a rugged handheld test tool

Temperature range J-type Thermocouples K-type Thermocouples T-type Thermocouples E-type Thermocouples Temperature accuracy Above -100°C (-148°F) J, K, T, E and N-type** Below -100°C (-148°F) Battery life Weight -210°C to 1200°C (-346°F to 2192°F) -200°C to 1372°C (-328°F to 2501°F) -250°C to 400°C (-418°F to 752°F) -150°C to 1000°C (-238°F to 1832°F) Thermocouple types K, J, T, E, N, R, S Min./Max./Avg recording Yes Number of inputs 53-II (Single), 54-II (Dual)Compatible with optional toolpackYes Time stamp Time of day Differential (T1-T2) readout 54-II only Splash/dust resistant Yes Data logging up to 500 points Yes Dual display with backlightYes IR data port for interface to PC Yes Temperature Range J-type Thermocouples K-type Thermocouples T-type Thermocouples E-type Thermocouples N-type Thermocouples R and S-type Thermocouples Temperature Accuracy Above - 100°C (-148°F): J, K, T, E and N-type R and S-type Below - 100°C (-148°F): J, K, E and N-types T-type Battery Weight Warranty

-210°C to 1200°C (-346°F to 2192°F) -200°C to 1372°C (-328°F to 2501°F) -250°C to 400°C (-418°F to 752°F) -150°C to 1000°C (-238°F to 1832°F) -200°C to 1300°C (-328°F to 2372°F) 0°C to 1767°C (32°F to 3212°F)

± [0.05% +0.3°C (0.5°F)] ± [0.05% +0.4°C (0.7°F)] ± [0.20% +0.3°C (0.5°F)] ± [0.50% +0.3°C (0.5°F)] 1000 hours typical, AA 400g 3 years

Prices where indicated by a are subject to change. Please call your local sales office or visit www.farnellinone.com for the latest prices.

220406

± [0.05% +0.3°C (0.5°F)] J, K, E ± [0.20% +0.3°C [0.5°F] T-type ± [0.50% +0.3°C (0.5°F] 1000 hours typical, AA 400g

Mftrs. List No. FLUKE 53 SERIES II FLUKE 54 SERIES II FlukeView Forms Software SC1 Meter Hanging Kit TPAK80-4 C101 Carry Case

Order Code 318-338538 318-339738 418-606038 302-957838 947-978338

1+ 219.00 258.00 111.00 16.00 27.00

Price Each 5+ 213.54 251.56 109.32 15.65 25.65

10+ 204.99 241.50 106.31 15.24 25.00

Digital Thermometer

110

222579

Prices where indicated by a are subject to change. Please call your local sales office or visit www.farnellinone.com for the latest prices. Price Each 2+ 5+ 144.31 138.53 190.13 182.53 15.65 15.24 25.65 25.00 Price Each 34.10 50.45

Mftrs. List No. FLUKE 51 SERIES II FLUKE 52 SERIES II TPAK C101 Carry Case

Order Code 318-336138 318-337338 302-957838 947-978338 S N

1+ 148.00 195.00 16.00 27.00

10+ 132.66 173.47 -- -- -- --

62

Standard Calibration UKAS Calibration

Digital Thermometers

Fluke 53/54 Series II

An affordable thermometer designed to provide accurate measurements for many general temperature applications. The instrument'srobust engineering makes it ideal for refrigerated storage rooms, freezers/coolers, storage cabinets, and general outdoor use. In addition, the optional TopSafe protective case guards against damage from water, impact and dirt. Minimum and maximum valuesare shown on a clear, 2-line backlit display for easy reading. A wide choice of probes for a range of applications are available. In addition, the testo 110 can be upgraded for use with a wireless temperature probe.

W=64 H=182 D=40mm. Weight 171g

The new Fluke 53/54 Series II contact thermometers offer fast response and laboratory accuracy (0.05% + 0.3°C) in a rugged handheld test tool. Ì Large backlit dual display shows any combination of T1, T2, T1-T2, plus MIN, Max or AVG Ì Relative time clock on MIN, MAX and AVG provides a time reference for major events Ì Electronic Offset function allows compensation of thermocouple error to maximize overall accuracy Ì Measures J, K, T and E-types of thermocouples Ì Readout in °C, °F or Kelvin (K) Ì Sleep mode increases battery life Ì Battery door allows easy battery replacement without breaking the calibration seal Ì Optional Tool Pak accessory for hanging your thermometer (302-9578) Ì Data Logging up to 500 points of data with user adjustable recording interval Ì Additional thermocouple types R, S and N (for a total of 7 different types) Ì Real time clock captures the exact time of day when events occur Ì Recall funtion allows logged data to be easily reviewed on the meter display Ì IR communication port allows data to be exported to optional Fluke View Temperature PC software Fluke View Forms Software Here's a fast and easy way to document, store and analyse temperature measurements. Ì Produce professional-looking documents Ì In-depth analysis with records, charts and graphs Ì Standard and customisable forms Ì Export data to the measurement analysis programs Ì Infra-red interface between thermometer and PC makes data transfer fast and easy Ì Optional IR adaptor and cable for PCs without an IR port

Probe Type NTC NTC High Temperature Probe Battery Life

Range -50 to 150°C°C 0 to 275°C Upto 200 hours

Accuracy ±0.2°C (-0 to 80°C) else ±0.3°C 0.2°C (0 to 80°C) else 0.3°C

Resolution 0.1°C 0.1°C

Ì Ì Ì Ì

User-adjustable audible alarm limits aid in temperature control User-adjustable measuring rate (wireless mode) helps save battery power On-site documentation with the optional Testo printer, for easy temperature recording 2 years warranty

Probes: In order to meet a wide spectrum of measuring requirements, Testo provides a large range of air, immersion, surface and penetration probes.

Description NTC Air Probe NTC Surface Probe NTC Frozen Food Probe NTC Immersion Probe Range -50 to 150°C -50 to 150°C -50 to 140°C -50 to 150°C Accuracy ±0.2°C (-25 to 74.9°C) ±0.2°C (-25 to 74.9°C) ±0.2°C (-25 to 74.9°C) ±0.2°C (-25 to 74.9°C) t99 Order Code 60s 35s 20s 10s

Wireless Probes and Accessories As well as cable connected probes, the thermometer can also be used with a range of wireless probes (eg 108-3024). Wireless probes offer users exceptional practicality as hindrance during measurement and potential damage to the probe cable are eliminated. To convert the thermometer for use with the wireless probes an optional wireless module (108-3002) is required.

Description Wireless Immersion Probe Radio Frequency Range -50 to 275°C 869.85 MHz Accuracy ±0.8°C (-50 to 200°C) t99 Order Code 12s

Order before 8pm for FREE next day delivery

Valid until 28th February 2007

418987.429029

Infrared Thermometers

60 Series

Description Digital Thermometer Probes NTC Air Probe NTC Surface Probe NTC Frozen Food Probe NTC Immersion Probe Wireless Probes & Accessories Wireless Module Wireless Immersion Probe Other Accessories Instrument and Probe Case Protective Case IRDA Printer Spare Printer Rolls (6)

Order Code 108-380438 108-300138 108-380538 108-380738 108-385238 108-300238 108-302438 108-301138 108-303238 836-924038 444-653738

1+ 65.00 46.84 52.15 110.32 45.63 25.57 65.19 17.05 17.05 163.47 11.43

Price Each 3+ 59.00 43.24 46.64 99.29 42.12 23.61 60.17 16.50 15.74 150.90 10.98

5+ 55.29 40.15 43.46 95.28 39.11 21.92 55.87 15.26 14.61 140.12 10.63

Digital Thermometers

72-2060/72-2065 Two rugged, K type single and dual input thermometers, ideal for field or bench use - includes protective holster. Ì Ì Ì Ì Ì Ì Ì Ì 31/2 digit LCD Selectable °C/°F, 1° resolution Front panel offset adjustment Dual thermocouple input (72-2065) Displays T1 and T2 and T1-T2 in differential mode (72-2065) Data hold Maximum record Includes holster, 9V battery, owner manual, thermocouple probe (72-2065 includes two thermocouple probes)

W=160 H=200 D=55mm. Weight 320g

The Fluke 60 Series non-contact thermometers are the ideal professional diagnostic tools for quick and accurate temperature measurements. Ideal for measuring surface temperatures of rotating, hard-to-reach, electricity live or dangerously hot targets like electrical motors and panels, and heating and ventilation systems. Laser sighting system guides measurements to the right target and in less than a second, the large temperature display provides a readout of the surface temperature. Ì Ì Ì Ì Ì Ì Laser guided sighting system for easy targeting with 1% accuracy Up to 12 points datalogging with min, max and average functions Up to 50:1 optical resolution Choice between models with fixed or adjustable emissivity Backlit display for easy reading in the dark Temperatures up to 760°C

63 Pistol grip -32 to 535°C 12:1 Ì Ì Ì MAX only 66 Pistol grip -32 to 600°C 30:1 Ì Ì Ì Ì Ì Ì Ì 68 Pistol grip -32 to 760°C 50:1 Ì Ì Ì Ì Ì Ì Ì 68 0.5 secs 0.1°C ±0.5% or ±1°C ±3°C ±2.5°C ±2°C ±1% of reading or ±1°C ±1% of reading or ±1°C 8m 0.1 to 1.0 by 0.01 steps

Temperature range -50 to 1300°C -58 to 2000 Accuracy -15°C to 0°C: ±2°C, 0°C to 1000°C: ±(0.3% + 1°C) Dimensions 69.85 (W) x 146.05 (H) x 38.14 (D)

228184

Description Single Channel Dual Channel

Mftrs. List No. 72-2060 72-2065

Order Code 342-155738 342-156938

1+ 39.95 45.00

Price Each 3+ 35.00 39.00

5+ 29.95 37.50

Infrared Thermometer

FLUKE 61 The Fluke 61 thermometer provides a quick non-contact temperature measurement in a compact case surrounded with a protective holster. Targeting objects is easy with the bright laser beam activated via the simple push button operation. Even in the dark the display is simple to read with the quality backlit screen. Ideal for measuring surface temperatures of rotating, hard-to-reach, electrically live or dangerously hot targets. Ì Ì Ì Ì Ì Ì Ì Ì Ì Shock-absorbing holster increases ruggedness Bright laser beam provides easy targeting Large display clearly supplies data at a glance Quality backlight illuminates the screen in the dark Automatic sleep mode after 15 seconds extends battery life Alkaline batteries provide over 4000 typical measurements Battery life: 12 hours with laser and backlight activated Dimensions (LxWxH): 184x45x38mm Weight: 227g

-18°C to 275°C (O°F to 527°F) < 1 second 0.2° ± 2° of reading or ± 2%, whichever is greater Foar Targets at: -18°C to -1°C (0°F to 30°F): ± 3° (± 5°F) -1°C to 275°C (30 to 527°F): ± 2% of reading or ± 2°C (± 3.5°F), whichever is greater 8:1 Distance to spot size ratio Fixed at 0.95 Minimum 200mm (spot 25mm)

Form factor Temperature range Optical resolution Laser beam Backlit LCD display Selectable °C or °F MIN/MAX/AVG/DIF Datalogging Hi/Lo Alarm Adjustable emissivity Response time Resolution Repeatability Accuracy < 26°C: -26 to -18°C: -18 to 23°C: 23 to 510°C: > 510°C: Distance to target Emissivity

63

63 0.5 secs 0.2°C ±0.5% or ±1°C ±3°C ±2.5°C ±2°C ±1% of reading or ±1°C ±1.5% of reading Up to 2m Fixed at 0.95

66 0.5 secs 0.1°C ±0.5% or ±1°C ±3°C ±2.5°C ±2°C ±1% of reading or ±1°C ±1% of reading or ±1°C 5m 0.1 to 1.0 by 0.01 steps

Prices where indicated by a are subject to change. Please call your local sales office or visit www.farnellinone.com for the latest prices.

403475.429078

Ranges Response Time Resolution Repeatability Accuracy (Assumes ambient operating temperature of 23°C)

Description IR Thermometer 535°C IR Thermometer 600°C IR Thermometer 760°C HOLSTER CASE, HARD

Mftrs List No. 63 66 68 H6 C101 S

Order Code 921-008338 921-009138 921-010538 828-393138 947-978338

1+ 132.00 242.00 312.00 13.00 27.00

Standard Calibration Charge

Price Each 3+ 5+ 120.35 109.82 225.65 199.58 280.81 265.77 12.79 12.54 25.65 25.00 Price Each 34.10

Optical resolution Emissivity Minimum spot size

Prices where indicated by a are subject to change. Please call your local sales office or visit www.farnellinone.com for the latest prices.

333733

Mftrs. List No. FLUKE 61 C23 Carry Case

Order Code 397-006138 428-360038

1+ 82.00 10.20

Price Each 2+ 80.18 10.13

Advanced warning of obsolete products

Email notification of obsolete products straight to your inbox Replacements or upgrades recommended. Sign up now at www.rohs.info/productwatch

5+ 78.13 -- --

Need more technical data?

Over 150,000 data sheets available online at www.farnellinone.co.uk

08701 200 200

Fax: 08701 200 201

www.farnellinone.co.uk

Prices exclude VAT Infrared Thermometer

IR608 The IR 608 non-contact thermometer is the ideal tool for customers who want to measure temperature in a variety of applications. The unit has the following additional features: Ì "Pistol grip design" for comfortable grip Ì Measuring range -18°C to 275°C Ì Laser sighting for accurate targeting Ì Ì Ì Ì Ì Display hold (7 seconds) Distance to spot size ratio 8:1 Accuracy to 2% Backlit display One year "no hassle" warranty

Compact Thermal Anemometer

425 An easy to use, compact anemometer with an attached thermal probe on a telescopic handle (max. 820mm). Duct measurements are easilyentered and the volume flow measurement is calculated and shown on the clear display. In addition, it is possible to switch easily betweenflow and temperature readings. Ì Ì Ì Ì Ì Ì Ì Temperature, flow and volume flow measurement Multi-point or timed mean calculation Max/min values Hold button to freeze readings Display light Auto-Off function 2 years warranty

NTC Thermal Anemometer -20 to +70°C 0 to 20 m/s 0.1°C 0.01 m/s ±0.5°C±1 digit ±(0.03m/s+5% of mv)±1 digit -20 to 50°C 9V 20 hours

418065

Prices where indicated by a are subject to change. Please call your local sales office or visit www.farnellinone.com for the latest prices. W=60 H=230 D=165mm. Weight 500g

413732

Probe Type Measurement range Resolution Accuracy Operating Temperature Battery Battery life

Price Each Description Infrared Thermometer Standard Calibration Charge S Order Code 947-979138 1+ 53.00 Price Each 34.10 3+ 47.84 Description Thermal Anemometer Instrument and Probe Case TopSafe - Protective Carry Case Order Code 108-299238 108-301138 108-298938 1+ 275.00 17.05 17.05 Price Each 3+ 255.00 16.50 16.50

5+ 245.00 15.26 15.26

Temperature Humidity Meter

971 Invaluable for facility maintenance and utility technicians, HVAC-service contractors, and specialists who assess indoor air quality (IAQ). Lightweight and easy to hold, with a rugged holster and twistopen protective sensor cover. Ì Ì Ì Ì Ì Simultaneously measures humidity and temperature Measures dew point and wet bulb 99 record storage capacity Min/Max/Avg Data Hold Ergonomic design with built-in belt clip and protective holster Ì Backlit, dual readings display Ì Twist-open protective cap Ì Low battery indicator

Prices where indicated by a are subject to change. Please call your local sales office or visit www.farnellinone.com for the latest prices.

Temperature and Humidity Instrument

625 An ideal entry level instrument for measurements of temperature, humidity and dewpoint. Use it to monitor hard-to reach points in AC and heating system ducts, environmental changes in remote rooms or storage areas, anywhere you need to be two places at the same time or only have one hand free to work. The clear back-lit display can be switched between relative humidity, wet bulb, and dewpoint at the touch of a button. The temperature / humidity probe can be used 2 ways: either attached to the instrument or connected via a probe handle and cable (108-3014).

Probe NTC Temperature Probe Capacitive Humidity Sensor Range Accuracy (±1 digit) Resolution -10 to 60°C ±0.5°C 0.1°C 0 to 100% ±2.5% RH (5 - 95% 0.1% RH RH RH)

64

W=64 H=182 D=40mm. Weight 195g

Wireless Probes As well the probe head and cable connected probe, the testo 625 can also be used with a wireless probe handle (108-3003). This offers users exceptional practicality as hindrance during measurement and potential damage to the probe cable are eliminated. The probe handle uses the probe head supplied with the standard instrument. To convert the instrument for use with the wireless handle an optional wireless module (108-3002) is also required. Includes: humidity/temperature measuring instrument, incl. plug-in humidity probe head, battery and calibration protocol.

418875

W=60 H=194 D=34mm. Weight 188g Temperature Measurements Range Resolution Accuracy -20° to 60°C 0.1°C ±0.5°C (0°C-45°C) / ±1.0°C (rest of range) Response Time 500 ms Sensor Type NTC Humidity Measurements Range Resolution Accuracy 5% to 95% R.H. ±2.5% R.H. (10%-90% R.H.) / ±5% (rest of range) Response Time 60 s with 1 m/s air movement Sensor Type Electronic Capacitance Polymer Film Sensor

426001

Description 625 Thermo Hygrometer Accessories Plug-In Probe Handle Wireless Module Wireless Handle Instrument and Probe Case Protective Case

Order Code 108-301238 108-301438 108-300238 108-300338 108-301138 108-298938

1+ 145.00 30.09 25.57 64.19 17.05 17.05

Price Each 3+ 135.00 27.77 23.61 59.25 16.50 16.50

5+ 120.00 25.79 21.92 55.02 15.26 15.26

Mftrs. List No. 971 Standard Calibration S

Order Code 114-797738

1+ 122.00

Price Each 3+ 5+ 110.00 105.00 Price Each 60.98

Vane Anemoneter

72-6638 A small, low cost meter that can accurately measure air velocity and wind speed in air conditioning and heating systems. Ì 31/2 digit LCD Ì Accurate ±(3% + 2 digit) air velocity measurement Ì Measurement in ft/min, m/sec, knots and km/hr Ì Low-friction ball bearing wheel Ì Includes owner manual Ì Requires 9V battery (not included) Ì CE marked

H=76.2, W=38.1, L=110 Resolution 0.1m/sec 0.1km/hr Resolution 0.1 knots 10 ft/min

Fast, flexible 24 hour ordering

Tel 08701 200 200 Fax 08701 200 201 eMail [email protected]

m/sec Km/hr 0.8 to 30.0m/sec 2.8 to 108 km/h

knots ft/min

1.6 to 58 knots 160 to 5900 ft/min

Order before 8pm for FREE next day delivery

Valid until 28th February 2007

228156

Temperature Data Logger with USB Interface

Ì USB interface for set-up and data download Ì 16,000 readings Ì -35 to +80°C measurement range Ì 2 User-Programmable alarm thresholds Ì Bright red, green and amber LED status indication Ì Replaceable internal lithium battery Ì Translucent lid provides IP67 waterproof seal Ì Supplied with batteries

Mftrs. List No. Order Code 72-6638 356-266938

1+ 55.00

Price Each 3+ 49.00

5+ 42.00

Digital Sound Lever Meter

An easy to use, hand-held, digital sound level meter. Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì A weighting 3 ranges, 35-130dB measurement 31/2 digit LCD Fast response Meets IEC 651 type 2 standards Over and under range indicator Data hold Includes owner manual Requires 9V battery (not included) CE marked

Module: H=20.5, W=20.5, L=94

Measurement Internal Accuracy Logging Operating Battery Range Resolution (Overall Error) Rate Temperature Life -35 to +80°C 0.5°C ±1°C (typ.), ±2°C (Max.) 10 Sec. to 12 Hrs -25 to +80°C 1 Year (Min.)

338605.344023

Mftrs. List No. EL USB-1

Order Code 491-343738

1+ 32.50

Price Each 5+ 10+ 30.25 29.50

25+ 29.00

Range 35-80dB/50-100dB/80-130dB Resolution 0.1dB Accuracy ±1.5dB at 1kHz(94dB level) H=25, W=67

228191

USB Relative Humidity and Temperature Data Logger

EL-USB-2 EL-USB-2 measures and stores relative humidity and temperature readings. Offers LED status indication, user settable logging rate, start-time and alarms. Downloads are stored via a PCs USB port, software requires Win 98/2000 or XP and also allows humidity, temp and dewpoint data to be graphed and printed.

L=103, W=27, D=27mm

Mftrs. List No. Order Code 72 - 6635 356-265738 PP3 Battery378-578638

Price Each 1+ 59.00 1+ 3.81 3+ 55.00 3+ 3.77 5+ 49.00 12+ 3.70

25+ 3.46

Digital Sound Level Meter

72-860A The 72-860A is a hand held, general purpose sound meter for type 2 measurement. Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì

Range Resolution Frequency Range Accuracy AC output DC output Dimensions

Ì 16 000 RH readings Ì 16 000 temperature readings

Ì 4 user-programmable alarms Ì Status indicated by flashing red and green LED

0 to 100% RH 0.5% RH ±3.5% RH -35 to +80 Resolution Accuracy Logging rate 0.5% RH ±2°C 10 sec to 12 hours

381902.381932

A and C weighting 351/2 digit LCD 35-130dB measurement 2 ranges Meets IEC 651 type 2 standards 1/2" condenser microphone Fast and slow dynamic response Over and under range indicator Maximum level hold Internal oscillator for calibration AC and DC signal output RS232 interface Includes owners manual, 9V battery, carrying case, wind screen and adjustment screwdriver

Humidity measuring range Resolution Accuracy Temperature measuring range

Mftrs. List No. EL-USB-2

Order Code 852-289838

1+ 50.38

Price Each 5+ 10+ 44.08 42.31

65

25+ 41.47

Photo Tachometer

An accurate, small, hand-held, non-contact photo tachometer. Simply place a reflective marker on a rotating object, point and measure. Ì Ì Ì Ì Ì Ì Large 5 digit LCD One second response time at distances from 2" to 6" Safe and precise Stores last/min/max readings Includes 23" of reflective tape, carry case and manual Requires four 1.5V batteries (not included)

35-90dB(low),75-130dB(high) 0.1dB 30Hz-12kHz ±2.0dB at 1kHz(94dB level) 0.65 V RMS corresponding to each range step 10mV/dBm nominal 66.68 (W) X 241.3 (L) X 25.4 (H)

336783.343913

Mftrs. List No. 72-860A

Order Code 490-843038

1+ 85.00

Price Each 3+ 77.00

10+ 69.00

Range 5 to 99999rpm Resolution 0.1 rpm<1000 rpm, 1 rpm1000rpm Accuracy ±(0.05% +1 digit)

W=70, D=38.1, L=190.5

Low-cost USB Temperature Data Logger

EL-USB-LITE A low-cost data logger that measures and stores temperature readings. The data logger can be configured and the stored data downloaded by plugging the module into a PC's USB port and running the supplied control software. The downloaded data can be graphed, printed and exported to other applications. Ì Stores up to 4000 temperature readings Ì 30 days continuous use from a single battery Ì Supplied software supports Windows 98SE/2000/XP

Measurement Range Internal Resolution -10 to 50 °C 1 °C

228177

Mftrs. List No. 72-6633

Order Code 356-263338

1+ 75.00

Price Each 3+ 69.00

5+ 57.00

Ì Ì Ì Ì

Measurement in °C or °F Programmable logger name Programmable high and low alarm limits Red / Green alarm status indication at the push of a button

±3°C every 30 minutes

415811.428945

The latest NEW products

1000's of new products added every month www.farnellinone.co.uk

Accuracy (overall error) Logging Rate

Mftrs. List No. EL-USB-LITE

Order Code 100-615738

1+ 25.64

Price Each 5+ 10+ 23.93 22.09

25+ 20.52

08701 200 200

Fax: 08701 200 201

www.farnellinone.co.uk

30-200 Watt DC Power Supply Series

Agilent E3600 Series

Our "one-box" philosophy means we pack more and more capability into the power products themselves, in some cases giving you a rack's worth of capability in a single box. By offering more, these products demand less from you--fewer instruments, less rack space, simpler test set-ups, and lower cost of ownership. Key Features: · · · · · · · · · · · · Excellent regulation Low output noise Multiple isolated output (up to 3 isolated output) GPIB & RS-232 Interface (SCPI Compatible) Built-in voltage and current measurement OVP & OCP protection Fast Load Transient Response (<50uS) Remote sensing feature Intuilink Connectivity for Excel ® and Word Agilent IO Library Suite IVI-COM VXI Plug &Play

Agilent's Power Supply Series do more and demand less

Software Support:

*Excel is a registered trademark of Microsoft Corporation

Description E3610A 30W, Ranges: 8V/3A & 15V/2A E3611A 30W, Ranges: 20V/1.5A & 35V/0.85A E3612A 30W, Ranges: 60V/0.5A & 120V/0.25A E3614A 48W, 8V/6A E3615A 60W, 20V/3A E3616A 60W 35V/1.7A E3617A 60W, 60V/1A E3620A 50W, Dual output 2x 25W/25V/1A E3630A 35W, Triple output 2x 10W/20V/0.5A 1x 15W/6V/2.5A E3631A 80W, Triple output 1x 30W/6V/5A 2x 25W/25V/1A, GPIB,RS-232 E3632A 120W, Ranges: 105W/15V/7A & 120W/30V/4A, GPIB,RS-232 E3633A 200W Ranges: 160W/8V/20A & 200W/20V/10A, GPIB,RS-232 E3634A 200W Ranges: 175W/25V/7A & 200W/50V/4A, GPIB,RS-232 E3640A 30W Ranges: 24W/8V/3A & 30W/20V/1.5A, GPIB,RS-232 E3641A 30W Ranges: 28W/35V/0.8A & 30W/60V/0.5A, GPIB,RS-232 E3642A 50W Ranges: 40W/8V/5A & 50W/20V/2.5A, GPIB,RS-232 E3643A 50W Ranges: 49W/35V/1.4A & 48W/60V/0.8A, GPIB,RS-232 E3644A 80W Ranges: 64W/8V/8A & 80W/20V/4A, GPIB,RS-232 E3645A 80W Ranges: 77W/35V/2.2A & 78W/60V/1.3A, GPIB,RS-232 E3646A 60W Dual output 24W/8V/3A & 30W/20V/1.5A, GPIB,RS-232 E3647A 60W Dual output 28W/35V/0.8A & 30W/60V/0.5A, GPIB,RS-232 E3648A 100W Dual output 40W/8V/5A & 50W/20V/2.5A, GPIB,RS-232 E3649A 100W Dual output 49W/35V/1.4A & 48W/60V/0.8A, GPIB,RS-232

Order Code 121-447738 121-447838 121-447938 121-448038 121-448138 121-448338 121-448438 121-448538 121-448638 121-448738 121-448838 121-448938 121-449038 121-449138 121-449238 121-449338 121-449538 121-449638 121-449738 121-449838 121-449938 121-450138 121-450238

Price Each £238.43 £238.43 £238.43 £373.70 £373.70 £373.70 £373.70 £325.00 £325.00 £684.36 £598.16 £723.12 £723.12 £390.90 £390.90 £416.60 £416.60 £508.79 £508.79 £546.22 £546.22 £653.12 £653.12

Connectivity Hardware Solutions

GPIB Cables and Adapters LAN/GPIB Gateway

· Easy connection between GPIB instruments and a PC GPIB interface

Description 0.5 meters 10833D 1 meters 10833A 2 meters 10833B 4 meters 10833C 6 meters 10833F 8 meters 10833G Adaptor GPIB/ GPIB 10834A Order Code 121-452638 121-452738 121-452838 121-453038 121-453138 121-453238 121-453338 Price Each £41.05 £46.52 £51.99 £41.05 £62.94 £68.42 £20.78

· Connections of GPIB and RS232 Instruments via LAN, good for control of remote or distributed instruments

Description E5810A Gateway Order Code 121-452238 Price Each £649.00

USB/4 Port RS232 Interface

USB/GPIB Interface

· USB connection to four RS-232 instruments ideal for access to four additional RS-232 ports · Direct USB connections to a GPIB instrument for easy connectivity

Description 82357A Interface Order Code 121-452038 Price Each £313.00 Description E5805A interface Order Code 121-452338 Price Each £189.00

PCI High-Performance GPIB Interface Card

· GPIB connection for a PC with an available PCI slot for maximum throughput

Networked 5 Port USB Hub

· Connections to USB, GPIB or RS-232 instruments via LAN, good for distributed test environment that requires different IO interfaces

Description Order Code 82350B Interface Card 121-452138 Price Each £313.00 Description E5813A interface Order Code 121-452538 Price Each £244.00

5½ Digit Digital Multimeter

More capability in a value-priced digital multimeter

Key Features: · Dual display · 5½ digit resolution (120.000 counts) · 16 measurement functions including temperature and capacitance · 0.025% DC voltage accuracy · USB interface (TMC -488.2 compliant) · SCPI compatible · Comes with Agilent IO Library, DMM Intuilink, IVI-COM driver, LabVIEW ® driver

*LabVIEW is a registered trademark of National Instruments Corporation

Description 33405A DMM

Order Code 120-989638

Price Each £409.00

Find creative ways to unlock the value in your digital multimeter

Are you getting all of the potential value from your digital multimeter? Get a free copy of 8 Hints for Making Better Digital Multimeter Measurements and discover these simple, creative ways to enhance the power and precision of your DMM.

Download your free copy today at www.agilent.com/find/dmm-8hints

Information

untitled

34 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

300064


Notice: fwrite(): send of 200 bytes failed with errno=104 Connection reset by peer in /home/readbag.com/web/sphinxapi.php on line 531