Read IFSPRICE.pdf text version

COMPONENTS FOR INDEPENDENT FRONT SUSPENSION MUSTANG II CONVERSION

(SEE OTHER SIDE OF SHEET FOR HUB TO HUB)

INDEPENDENT FRONT SUSPENSION BASIC KITS

Most Kits Are $300 ,

* Denotes $220 ! $100 Adders For Frame Pieces, Radiator Supports As Req'd.

PASSENGER CAR 28-48 FORD *49-59 FORD 33-38 MOPAR ! 39-51 MOPAR ! 38-51 BUICK GM B,P,O 28-54 CHEVY 60-66 Falcone & Fairlane 50-64 Rambler 62-67 Chevy II & Nova ($600 Adder For Stub Front End 51 Austin A40 ($100 Adder) 1965-68 MUSTANG 41 WILLYS Crossmember & Inner Fender Panels) TRUCKS, PICK UP 28-64 FORD 28-72 CHEVY 30-4O PLYMONTH 33-69 DODGE 34-51 International 41-64 Studebaker 41-46 Willys 59 Willys 2WD Pickup UPPER CONTROL ARMS TUBULAR (TAPPERED OR WIDE PATTERN, STOCK WIDTH OR *NARROWED 5/8") $190 pr. FULLY POLISHED STAINLESS STEEL $320 pr. CARBON STEEL STOCK ARMS (not tubular) REBUILD KIT $50 pr. $100 pr. $160 pr. NEW REBUILT UPPER CONTROL ARMSBOLTS (4 BOLTS W/ NUTS) $15 LOWER CONTROL ARMS, TUBULAR STRUTLESS STOCK WIDTH OR *NARROWED 5/8" WITH SCREW IN TYPE BALL JOINT. $280 pr. SPRING MOUNT STOCK LOCATION Or 1¼" BELOW, SHOCK MOUNT 3-3/8" WIDE, STOCK LOCATION, 1" or 1¾" BELOW

COIL-OVER SPRINGS & SHOCKS, COIL OVER MOUNT STOCK LOCATION, 1", 1¾", or 2½" BELOW STOCK LOCATION. FULLY POLISHED STAINLESS STEEL

$530

CARBON STEEL

$250 $200

pr.

STRUT TYPE

TUBULAR, (replaces original arms) arms use original rubber bushing with screw in type ball joint.

FOR STOCK SHOCKS & STOCK SPRINGS, SHOCK MOUNT IN STOCK LOCATION COIL-OVER SPRINGS & SHOCKS, coil/over mount 1" below stock location for 4" stroke shock below

pr.

STOCK ARMS (not tubular) REBILD KIT $50

pr.

REBUILT

FULLY POLISHED TUBULAR STAINLESS STEEL

$100 pr. $200

NEW

STRUT ROD KIT, TUBULAR OR STOCK RODS

CARBON STEEL

$170 pr. $140 pr. $100

Tubular Kit includes pair of tubular strut rods with rubber pivot bushing, studs, strut rod mounting plates & pivot point bolts. Mounting plates are oversized at frame connection area to allow pivot point alignment at time of installation. Stock Kit includes Solid Rods, Large Round Bushings, Washers, & Brackets.

BRACKETS FOR TUBULAR OR SOLID STOCK STRUT RODS SPRINGS & SHOCKS (NOTE SHORT STROKE WITH STOCK SHOCKS) STOCK SPRINGS 13.5" Mustang II, 4 Cyc. $70 pr. 13.5" Mustang II, 6 Cyc. $70 pr. 15" 85 Mustang, 4 Cyc. $100 pr. 15" 85 Mustang, 8 Cyc. $100 pr. COIL OVER TYPE SPRINGS

Spring Height Mount Heigth Of Matching C/O Shock 10¾" 10¾" Thru 11¾" 11¾ Thru 13¼" RATES #/" SHOCKS, STOCK MUSTANG II & MUSTANG II TYPE Stock Mustang II, Stock Stroke

Mustang II Type Except 3.8" Stroke Mustang II Type Except 4.2" Stroke Mustang II Type Except 5" Stroke STROKE COMP. EXT.

$25 pr.

MOUNT HEIGHT

340 360 383 415

$40 pr. $60 pr $60 pr $50 pr.

COMP.

2.9" 3.8" 4.2" 4.9"

EXT.

8.7" 8.4" 8.6" 9.4"

11.6" 12.2" 12.8" 14.3"

10¾" 10¾" 11¾ 12½"

Stock Mustang II Height Stock Mustang II Height Stock M. II Height + 1" Stock M. II Height + 1¾"

COIL OVER TYPE SHOCKS

STROKE

RATES #/"

MOUNT HEIGHT

8" 10" 14"

$130pr. $130pr. $200pr.

375, 450, 500, 600 350, 450, 550 225, 300,

$200 pr. $250 pr. Adj.Alum $350 pr. $200 pr. Steel Steel Alum. $250 pr. Adj.Alum $350 pr. Alum.

3.4" 5" 4" 4"

8.3" 9.6" 9.6" 9.5"

11.6"

10¾", Stock Mustang II Height

14.6" Between 11½"&13¼",Stock MII Height + 1",1¾",Or 2½" 13.6" 13.5" $30 $170 pr. $180

Between 11½" & 12½", Stock MII Height + 1",Or 1¾"

Adjustable Shocks Are Aluminum, Have Adjustable Compression / Rebound & Are Revalveable & Rebuildable

COIL-OVER THRUST BEARING KIT 2 bearings & 4 washers for installation between coil-over shocks & base of spring to simpify adjust. COIL-OVER WRENCH QA1 Ajustable Or Non-adjustable $15 Pro Shock $10

SPINDLES, MUSTANG II, NEW STOCK OR 2" DROPPED 82-85 REBUILT POWER RACK AND PINION NEW MANUAL MUSTANG II $150 MOUNT. BUSH. STD. 15 pr. OFFSET $25, TIE ROD ENDS M II $25 pr, 79/80 MUSTANG (1½"Long.than M II) & 81/82 Must. (2 3/8"lgr.) $40 $ ROTORS, FOR MUSTANG SPINDLES; 9", 10.5", OR 11" (1" THICK FORD GRANADA TYPE) WITH OUTER BEARING RACES

HUB TO HUB IS ½" WIDER WITH 11" ROTORS AS COMPARED TO 9" OR 10.5" GM ROTORS 9" OR 11" (1" THICK FORD GRANADA TYPE) WITH FORD FIVE ½" STUDS ON 4½" OR GM FIVE 7/16" STUDS ON 4¾" 10.5" WITH GM FIVE 7/16" STUDS ON 4¾" BOLT CIRCLE WITH MUSTANG II RACES 10.5" WITH FORD FIVE ½" STUDS ON 4½" BOLT CIRCLE WITH MUSTANG II RACES 11" W/ FORD 5 ½" STUDS ON 5½" OR 5 14mm STUDS ON 135mm / GM 5 7/16" OR ½" STUDS ON 5", 7½" MOUNT. SURFACE

BEARING & SEALS, 4 INTER RACES & 2 SEALS 9" & 11" ROTORS $15 10½" ROTORS BRAKE ADAPTER KIT OR MUSTANG II CALIPER MOUNT BRACKETS (9", 10.5", OR 11" ROTORS) ROTORS, (5 ½ Studs on 4½" OR 5 7/16" on 4¾") WITH BEAR./SEALS, DUST KIT, BRAKE KIT OR MUST.II BRACKETS & CALIPERS CALIPERS WITH PADS AND HARDWARE $100 pr. BRAKE LINE HOSE KIT Rubber or Stainless S. approx 16" Banjo Bolts, & Clips

MUSTAMG II, GM "METRIC" 82-87 CAMARO OR EQUIV. , OR GM "MID SIZE" 70-76 CAMARO OR EQUIV.

$85 pr. $100 pr. $130 pr. $190 pr. $15 $70 pr. $280 pr. $80

$150 Call For Pricing

Sway Bar Kit, Mounts behind cross member & below lower arms, pivots in alum. pillow blocks, attaches to front of lower arm using rod-ends and weld tabs. Sway Bar Kit As Above Except With Chrome Plated Bar & Pillow Blocks & Polished Stainless Steel Bolts

DUST CAP KIT (W/ SPINDLE NUTS & SPINDLES NUT RETAINERS) BALL JOINT, (SCREW IN) $15 EACH THREADED RING FOR BALL JOINT CARBON STEEL $8 EA.,STAINLESS STEEL $27 EA., BUSHINGS, Set Of 4 Upper Control Arms $25 Set Of 4 Lower Strutless Control Arms

$20

pr.

$15

GAYLECO

GAYLE BRIDGES CO.

Building Mustang II suspensions since 1996

212 Davis Dr., Hot Springs, AR 71901

PHONE 501-321-1130 FAX 501-321-1470 email [email protected]

PRICES SHOWN DO NOT INCLUDE SHIPPING

Website www.gaylebridgesco.com

2/18/2009

HUB TO HUB INDEPENDENT FRONT SUSPENSION MUSTANG II CONVERSION

USING MUSTANG II GEOMETRY 74-78 MUSTANG OR 74-80 PINTO OR BOBCAT Hub To Hub Pricing Applies To Most Applications,

PASSENAGER CARS

28-48 Ford

*49-51 Ford ($220 Adder)

28-54 Chevy

*Some Applications Require Addition Frame Rail Section, Etc., Call For Other / Custom Applications Tubular Upper/Lower Control Arms, Strutless Or With Struts ***Stock Rotors,(Ford 5 ½" studs on 4½" or GM 5 7/16" studs on 4¾"), 9" Mustang II,

33-38 Mopar

*39-51 Mopar ($100 Adder)

60-64 Rambler 60-66 Falcone & Fairlane

* 38-53 Buick GM B,P,O ($100 Adder)

41 Willys 1965-68 Mustang 51 Auston A40 ($100 Adder)

Inner Fender Panels ) ($600 Adder)

*62-67 Chevy II & Nova(Stub Front End Crossmember &

TRUCKS

28-64 Ford 28-72 Chevy 33-40 Plymonth 33-69 Dodge 34-51 International 41-64 Studebaker 41-46 Willys 59 Willys 2WD Pickup

Upper/Lower @10.5" GM or 11" Granada Type 1" Thick Rotors. Ford 5 ½" studs on 5½" or GM 5 Arms, 7/16" or ½" studs on 5" Listed Below. Spindles, Strut Stock MII Coil - Over Rods, & 9" Springs & Stock 10" Springs & 4" Stroke Shocks 14" Springs& 5" Stroke Shocks 2.6" Stroke Rotors Shocks Or MII (Mustang II Alum. Shocks With Alum. Shocks With Painted Steel Or Painted Steel Or Type Shocks Adjustable Adjustable Calipers)

Except With 4.5" Stroke Alum. Shocks

Compression/ Rebound !

Alum. Shocks

Compression/ Rebound !

Painted Steel Shocks

Painted Steel Shocks

$

1,250

$

1,500

$ $

Alum. Shocks

1,690 1,740

$

1,840

$ $

Alum. Shocks

1,800 1,850

$

1,950

INCLUDES THE FOLLOWING

IFS Basic Kit 300 $ 300 $ 300 $ 300 $ $ 300 $ Upper Arms 190 $ 190 $ 190 $ 190 $ $ 100 $ 280 $ 250 $ 250 $ 250 $ Lower Arms, Strutless Or W/ Strut Rods $ 100 $ Strut Rods NA NA NA NA NA $ 70 Springs & Shocks 110 $ 380 $ 480 $ 490 $ $ 110 $ Spindles, Stock or 2" Dropped 170 $ 170 $ 170 $ 170 $ $ 120 $ $ 25 $ 25 $ 25 $ 25 $ 25 $ 79-82 Tie Rod Ends vs Must.II Common Items Listed Below 518 $ 518 $ 518 $ 518 $ $ 518 $ $ (93) $ Discount (93) $ (93) $ (93) $ (93) $ @ GM Rotors With Mustang II Bearing Races. ! Adjustable Shocks Are Revalveable & Rebuildable ***Stock Upper/Lower Control Arms, Strut Rods, Spindles, & Ball Joints May Be Good Used Components That Have Been Cleaned & Sand Blasted With New Bushings. COMMON ITEMS Upper Arm Bolts $ 18 Rod Ends, Must. II $ 25 Caliper $ Dust Cap Kit W/ Nuts $ 20 Rotors, 5-4½" or 5-4¾" $ 85 Instructions Included Rack & Pinion,Man.or 82 Power $ 150 Bear.&Seals $ 15 Total $ Rack & Pinion Bushings $ 15 Caliper Mounts/Adaptors $ 70 300 190 250 590 170 25 518 (93)

120 518

ADDERS

11" Rotors W/ Ford 5½" or 135mm Bolt Pattern and 7½" Mount. Surface, Granada Type 1" Or 7/8" Thick Rotors With Five 1/2" Studs. 11" Rotors W/ GM 5" Bolt Pattern and 7½" Mount. Surface, 11" Granada Type 1" Or & 7/8" Thick Rotors With Five 1/2" or 7/16" Studs. 10.5" GM Rotors With Ford Five 1/2" Studs On 4½" Bolt Circle Fully Polished Stainless Steel Upper & Lower Control Arms Brake Line Hose Kit, Rubber or Stainless Steel Lines approx 16", Banjo Bolts, & Clips Thrust Bearing Kit, 2 bearings & 4 washers for installation between coil-over shocks & base of Sway Bar Kit, Mounts behind cross member & below lower arms, pivots in alum. pillow blocks, attaches to front of lower arm using rod-ends and weld tabs. $ $ $ $ $ $ $ 100 100 45 380 80 30 150

Sway Bar Kit As Above Except With Chrome Plated Bar & Pillow Blocks & Polished Stainless Call For Pricing Steel Bolts Power Steering Pump, Unisteer With Correct Flow & Pressure For 79-93 Power Mustang $ 200 R & P, OE Clip on Reservoir & Polished Aluminum Pulley Pump Brackets Zoom $120 Alstar $40 Power Steering Hose Kits, Rubber Covered $65 Gotta Show $150 U Joints, Steering Shaft & Shaft Supports, Steering Shaft, 3/4" Round 23", Carbon Steel $5 Manual R & P, 9/16"-26 Spline x 3/4" Round Or 3/4" DD Power R & P, ¾"-36 Spline x 3/4" Round Or 3/4" DD Shaft, DD 23" Plated (notch one end) $15 3/4" Round x 3/4" Round Or 3/4" DD x 3/4" DD 1" DD x 3/4" Round Or 3/4" DD 3/4" Round U Joints Are Carbon Steel 1"-48 Spline x 3/4" DD 3/4" DD U Joints Are Polished Stainless Steel U Joints As Above For 3/4" Round Shaft $45 U Joints As Above For 3/4" DD Shaft $65

GAYLECO

GAYLE BRIDGES CO. Building Mustang II suspensions since 1996

212 Davis Dr. Hot Springs, AR 71901

PHONE 501-321-1130 or 501-624-7920 FAX 501-321-1470 email [email protected]

PRICES SHOWN DO NOT INCLUDE SHIPPING

Website www.gaylebridgesco.com

2/18/2009

Information

2 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

762236


You might also be interested in

BETA
Ford Pickup 1948-56
112-0307-100-GTp094-96,98
00 CAT-all