Read Forside text version

HEMPEL

Product Data Manual

PRODUCT DATA SHEETS NUMERICAL INDEX DECORATIVE PAINTS

Product No. 02350 02450 02500 05250 05570 05990 06600 09810 22460 26600 26630 28600 28830 35230 36610 38820 38830 38860 38900 45450 46600 48600 48740 52040 52060 52080 52410 52940 52980 55100 55210 56360 56610 56620 58100 58230 58260 58270 58330 58410 58440 58470 58540 58610 58650 58660 58670 58680 58710 58720 58770 58810 58840 58850 58860 58870 58910

Product Name

Date

TRATAMIENTO FONDO.................................................... November 2008 HEMPEL'S WOOD STAIN................................................... October 2006 HEMPEL'S COLOUR VARNISH............................................ October 2006 HEMPEL'S PARQUET VARNISH........................................... October 2006 HEMPEL'S P/U LACQUER..................................................0ctober 2006 HEMPEL'S EPOXY SEALER................................................ October 2006 HEMPEL'S BINDER/SEALER.............................................. October 2006 HEMPEL'S BINDER/SEALER.............................................. October 2006 HEMPEL'S ALKYD UNDERCOAT.......................................... October 2006 HEMPEL'S CONTEX SEALER .............................................. October 2006 HEMPEL'S ACRYLIC PRIMER/SEALER.................................. October 2006 HEMPEL'S CONTEX PRIMER W/B........................................ October 2006 HEMPEL'S PRIMER/SEALER.............................................. October 2006 HEMPEL'S EPOXY FILLER.................................................. October 2006 HEMPEL'S FILLER............................................................ October 2006 HEMPEL'S INTERIOR FILLER.............................................. October 2006 HEMPEL'S EXTERIOR FILLER..............................................October 2006 HEMPEL'S SPATTER FINISH .............................................. October 2006 HEMPEL'S ACRYLIC FILLER .............................................. October 2006 HEMPEL'S EPOXY TEXTURE .............................................. October 2006 HEMPEL'S CONTEX SMOOTH............................................. October 2006 HEMPEL'S CONTEX SMOOTH W/B...................................... October 2006 HEMPEL'S SMOOTH TEXTURE............................................ October 2006 HEMPEL'S GLOSS ENAMEL .............................................. October 2006 HEMPEL'S FLAT ENAMEL.... .............................................. October 2006 HEMPEL'S SEMI-GLOSS ENAMEL........................................October 2006 HEMPEL'S METALLIC PAINT .............................................. October 2006 HEMPALUX® GLOSS........................................................ October 2006 HEMPALUX®SEMI-GLOSS... .............................................. October 2006 HEMPATHANE®ENAMEL................................................... October 2006 HEMPATHANE®TOPCOAT.............................................. September 2006 HEMPATEX®ENAMEL....................................................... October 2006 HEMPEL'S CONTEX FINE.... .............................................. October 2006 HEMPEL'S CONTEX MEDIUM..............................................October 2006 HEMUCRYL®ENAMEL...... .............................................. October 2006 HEMUCRYL®TOPCOAT HI-BUILD......................................... October 2006 HEMPEL'S ACRYLIC SILK EMULSION................................... October 2006 HEMPEL'S NON-DRIP ACRYLIC EMULSION............................ October 2006 HEMPEL'S SILK EMULSION .............................................. October 2006 HEMPEL'S CONTRACT EMULSION....................................... October 2006 HEMPEL'S WALL VARNISH.......................................... November 2009 HEMPEL'S WALLART........................................................ October 2006 HEMPEL'S SILK TEXTURE. .............................................. October 2006 HEMPEL'S INTERIOR EMULSION......................................... October 2006 HEMPEL'S GLOSS EMULSION............................................ October 2006 HEMPEL'S RUSTIK-2........................................................ October 2006 HEMPEL'S RUSTIK-3........................................................ October 2006 HEMPEL'S RUSTIK-5........................................................ October 2006 HEMPEL'S FLAT EMULSION............................................... October 2006 HEMPEL'S ACRYLIC EMULSION.......................................... October 2006 HEMPEL'S SUPER FINE TEXTURE........................................ October 2006 HEMPEL'S ROOF COATING................................................ October 2006 HEMPEL'S MULTI TEXTURE................................................ October 2006 HEMPEL'S FINE TEXTURE.................................................. October 2006 HEMPEL'S MEDIUM TEXTURE.............................................October 2006 HEMPEL'S COARSE TEXTURE.............................................October 2006 HEMPEL'S ACRYLIC EMULSION.......................................... October 2006

Issued: November 2009

Page 1 of 1

Product Data Sheet

Product Data

TRATAMIENTO FONDO 02350

Description: TRATAMENTO FONDO 02350 is a transparent wood preservative based on modified alkyd. Good penetration into new and old wood. The product contains biocide to prevent growth of fungus and mould and UV filter to reduce the degrading effect of the sunlight. Wooden structures. Wood. Transparent/00000 Flat 10 ± 1 Not relevant (see REMARKS below) 43°C 0.8 kg/litre 8 hours (20°C)

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use:

Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Recoat interval, min: Recoat interval, max: Surface condition:

Brush Dipping None None THINNER 08230 or 08110 24 hours (20°C) (see REMARKS below) None The surface should be stable, firm, dry and free of contaminants like dust, dirt, oil, grease and fungus. TRATAMENTO FONDO02350 should be applied wet-on-wet until full saturation is obtained. Wipe off any excess material to avoid a glossy surface after drying. The consumption will depend on the ability of the wood to absorb the preservative, but a 2 guideline for practical coverage will be 3-5 m /litre in the case of rough wood and 4-6 2 m /litre in the case of dressed wood. TRATAMENTO FONDO02350 is most effectively applied by brush. Cut ends should, if possible, be dipped. Drying data is given on the assumption that proper ventilation is provided. Recoating with products dissolved in white spirit may take place after 24 hours (20°C). For optimum protection against sunlight, recoat with HEMPEL'S WOODSTAIN 02450. TRATAMENTO FONDO 02350 is for professional use only.

Remarks:

Note: Safety:

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas. HEMPEL A/S - 0235000000CS003

ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, see "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations given in this data sheet represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue.

Issued: November 2008

Page 1 of 1

HEMPEL Product Data Sheet

Product Data

HEMPEL'S WOOD STAIN 02450

Description: HEMPEL'S WOOD STAIN 02450 is a durable modified alkyd-based wood stain for protection of all types of wood. The product contains biocides to prevent growth of fungus and mould. Contains UV filter to reduce the degrading effect of the sunlight. Wooden structures. Wood. Teak/08563 or according to HEMPEL's colour card Flat 36 ± 1 Not relevant (see REMARKS below) 42°C 0.9 kg/litre 8 hours (20°C)

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Recoat interval, min: Recoat interval, max: Surface condition:

Brush None THINNER 08230 or 08110 (20%) 8 hours (20°C) None

Dipping None THINNER 08230 or 08110 (20%)

The surface should be stable, firm, dry and free of contaminants like dust, sand, loose old paint, dirt, oil, grease and algae. The moisture content of the wood should not exceed 16 %. Avoid cleaning or grinding of the surface with steel wool or similar as this may cause rust stains. New wood (except teak and vacuum impregnated wood) and bare spots of previously treated wood should be saturated with HEMPEL'S WOOD PRESERVATIVE 02350. Do not apply under humid conditions or at temperatures below 5°C. The consumption will depend on the ability of the wood to absorb HEMPEL'S WOOD STAIN 02450, but a guideline for practical coverage is 5-10 m2/litre in the case of rough and absorbing wood and 10 -20 m2/litre in the case of dressed wood. Certain hard wood types may require thinning up to 20% to ensure proper penetration. HEMPEL'S WOOD STAIN 02450 is most effectively applied by brush. Drying data is given on the assumption that proper ventilation is provided. Apply 1 or more coats to obtain the desired colour and a uniform appearance. Different colours will be obtained depending on the type of wood and the ability of the wood to absorb the material. Please note that the shade becomes darker after repeated treatment. HEMPEL'S WOOD STAIN 02450 is for professional use only. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas. HEMPEL A/S - 0245008563CS004

Wood preserver: Remarks:

Note: Safety:

ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, see "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations given in this data sheet represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue.

Issued: October 2006

Page 1 of 1

HEMPEL Product Data Sheet

Product Data

HEMPEL'S COLOUR VARNISH 02500

Description: HEMPEL'S COLOUR VARNISH 02500 is a quick-drying, clear urethane varnish. The product is available in many attractive colours and is used for interior and exterior decoration of wood. Contains UV filter to reduce the degrading effect of the sunlight. Interior and Exterior: Windows and door frames, skirting, furniture, etc. Wood. Red/08569 or according to HEMPEL's colour card Glossy 46 ± 1 18.4 m²/litre - 25 micron* 38°C 0.9 kg/litre 3 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Surface condition: Wood preserver: Remarks:

Flat varnish brush 1st coat (20%) 2nd coat (10%) 3rd coat (None) THINNER 08230 or 08110 25 micron 50 micron 6 hours (20°C) None The surface should be stable, firm, dry and free of contaminants like dust, old paint, dirt, oil, grease and algae. The moisture content of the wood should not exceed 16 %. New wood (except teak and vacuum impregnated wood) and bare spots of previously treated wood should be saturated with HEMPEL'S WOOD PRESERVATIVE 02350. Do not apply under humid conditions or at temperatures below 5°C. Drying data is given on the assumption that proper ventilation is provided. Apply one or more coats to obtain the desired colour and a uniform appearance. When the desired colour is obtained, apply HEMPEL'S COLOUR VARNISH 02500 until the required finish and protection is achieved. A total of four coats is normally required on new wood, depending on the wood type. As the product is partly transparent, the resulting colour will depend on the type and colour of the wood. HEMPEL'S COLOUR VARNISH 02500 is for professional use only. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas. HEMPEL A/S - 0250008569CS003

Note: Safety:

ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, see "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations given in this data sheet represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue.

Issued: October 2006

Page 1 of 1

HEMPEL Product Data Sheet

Product Data

HEMPEL'S PARQUET VARNISH 05250

Description: HEMPEL'S PARQUET VARNISH 05250 is a one-component moisture curing, clear polyurethane varnish. The product is easy to apply and has good adhesion to wood. It gives a flexible but hard glossy surface, resistant to normal wear on wooden floors. It is ideal in kitchens and other areas where spillage of foodstuff and domestic cleaning agents may occur. Interior: New or previously varnished parquet floors and other wooden items such as stairs, handrails, windows, doors, etc. Wood. Transparent/00000 Glossy 35 ± 1 14.0 m²/litre - 25 micron* 26°C 1.0 kg/litre 1 hour (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos.: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max.: Surface condition:

Flat varnish brush 08880 (5%) THINNER 08880 25 micron 75 micron 5 hours (20°C) 48 hours (20°C)

Air Spray 08880 (5%)

The surface should be stable, firm, dry and free of contaminants like dust, loose varnish, old paint, dirt, oil and grease. The moisture content of the wood should not exceed 16%. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Safety:

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S PARQUET VARNISH 05250 REMARKS: Do not apply under humid conditions or at temperatures below 5°C. Drying data is given on the assumption that proper ventilation is provided. Apply one or more coats to obtain the desired colour and uniform appearance. To obtain a very smooth finish, light sandpapering between varnish coats is recommended. If maximum recoating interval is exceeded, careful sandpapering of the surface is recommended in order to ensure intercoat adhesion. HEMPEL'S PARQUET VARNISH 05250 is for professional use only. HEMPEL A/S - 0525000000CS001

Note: ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S P/U LACQUER 05570

BASE 05579 with CURING AGENT 95370 Description: HEMPEL'S P/U LACQUER 05570 is a two-component polyurethane varnish with excellent gloss retention. The product has excellent scratch and abrasion resistance and is resistant to water, sunlight and adverse weather conditions. Interior and exterior. Wood and other substrates. Transparent/00000 High-gloss 51 ± 1 20 m2/litre - 25 micron* 27°C 1.0 kg/litre 4-5 hours (20°C) 7 days at 20°C *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: Fully cured:

APPLICATION DETAILS: Mixing ratio for 05570: Application method: Thinner (max. vol.): Pot life: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Base 05579 : Curing agent 95370 5.4 : 1 by volume Brush/roller Conventional spray 08080 (5%) 08080 (25%) 12 hours (20°C) / 3 hours (40°C) THINNER 08080 25 micron 50 micron 8 hours (20°C) 30 days Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPATHANE ENAMEL 05570 SURFACE PREPARATION: APPLICATION CONDITIONS: The surface should be stable, firm, dry and free of contaminants like dust, sand, loose old paint, laitance, dirt, oil, grease and algae. The moisture content of the wood should not exceed 16%. Avoid cleaning or grinding of the surface with steel wool or similar as this may cause rust stains. When using brush for application, always brush off in the same direction as the grain. Light sanding with fine grinded sand paper in between coats is recommended. REMARKS: Drying data is given on the assumption that proper ventilation is provided. High humidity and/or condensation during application and the following 16 hours (20°C/68°F) may adversely affect the film formation. When applying HEMPEL'S P/U LACQUER 05570 by spray, thinning is recommended to obtain the best possible finish. The necessary amount of thinning will depend on the actual conditions. Curing agent 95370 is sensitive to moisture. Store in a dry place and keep cans tightly closed until use. Open cans with caution due to possible high pressure. Even small traces of water in the mixed paint will reduce pot life and result in film defects. HEMPATHANE ENAMEL 05570 is for professional use only. HEMPEL A/S - 0557000000CS003

Note: ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF exclusively by the Buyer and/or User. SALES, DELIVERY AND SERVICE, technical assistance is given subject writing. The Manufacturer and SellerOF The Products are supplied and all unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S EPOXY SEALER 05990

BASE 05999 with CURING AGENT 95040 Description: HEMPEL'S EPOXY SEALER 05990 is a two-component polyamide cured epoxy binder/sealer for porous substrates not previously coated. Has a low viscosity and excellent penetration properties. Also for use under epoxy/polyurethane coating systems. Interior and exterior: Foundations, floors, walls and ceilings. Concrete, masonry, cement rendering, gypsum boards, etc. Transparent/00000 Flat (when penetration into substrate has taken place) 29 ± 1 Not relevant (see REMARKS below) 25°C 0.93 kg/litre 10 hours (10°C) 4 hours (20°C) 1 hour (40°C)

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Mixing ratio for 05990: Application method: Thinner (max.vol.): Cleaning of tools: Pot life: Recoat interval, min: Recoat interval, max: Surface condition: Remarks:

Base 05999 : Curing 4 : 1 by volume Brush 08450 (5%) THINNER 08450 8 hours (20°C) 10 hours (10°C) None

agent 95040 Airless spray 08450 (5%) 4 hours (20°C) None 1 hour (40°C) None

The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. Use only where application and curing can proceed at temperatures above 10°C. A theoretical spreading rate cannot be calculated. For practical purposes, approximately 10 m²/litre is indicated depending on the surface roughness, porosity of the concrete, extent of thinning and application method. The sealer is intended to saturate the surface - any surplus to be removed, preferably when the sealer is still wet. Drying data is given on the assumption that proper ventilation is provided. HEMPEL'S EPOXY SEALER 05990 is for professional use only. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas. HEMPEL A/S - 0599000000CO005

Note: Safety:

ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, see "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations given in this data sheet represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue.

Issued: October 2006

Page 1 of 1

HEMPEL Product Data Sheet

Product Data

HEMPEL'S BINDER/SEALER 06600

Description: HEMPEL'S BINDER/SEALER 06600 is a well penetrating, clear acrylic product with water-proofing properties for old stone and masonry. For this purpose, two coats are often necessary. As a binder/sealer for porous substrates such as concrete, plaster and whitewashed surfaces. For use under solvent-borne as well as water-borne coating systems. Interior and exterior: Walls, ceilings, partitions etc. Concrete, masonry, cement rendering, plaster, stone and white-washed surfaces, etc. Transparent/00000 Glossy 20 ± 1 Not relevant (see REMARKS below) 38°C 0.8 kg/litre 15 minutes (20°C)

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max.vol.): Cleaning of tools: Recoat interval, min: Recoat interval, max: Surface condition: Remarks:

Brush/roller Conventional spray 08230 (50%) 08230 (50%) THINNER 08230 30 minutes (20°C) None

Airless spray 08230 (50%)

The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. A theoretical spreading rate cannot be calculated. For practical purposes, approximately 10 m²/litre is indicated depending on the surface roughness, the porosity of the concrete, the extent of thinning and the application method. When the product is used as a sealer, it is intended to saturate the surface - any surplus to be removed, preferably when the sealer is still wet. Drying data given is on the assumption that proper ventilation is provided. HEMPEL'S BINDER/SEALER 06600 is for professional use only. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas. HEMPEL A/S - 0660000000CS002

Note: Safety:

ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, see "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations given in this data sheet represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue.

Issued: October 2006

Page 1 of 1

HEMPEL Product Data Sheet

Product Data

HEMPEL'S BINDER/SEALER 09810

Description: HEMPEL'S BINDER/SEALER 09810 is an economic water-borne acrylic binder/sealer with good penetrating and dust binding properties. For use under solvent-borne as well as water-borne coating systems. Interior and exterior: Walls, ceilings, partitions, etc. Concrete, masonry, cement rendering, plaster, wood, etc. Transparent/00000 Semi-flat 27 ± 1 Not relevant (see REMARKS below) > 93°C 1.0 kg/litre 2 hours (10°C) 1 hour (20°C) 30 minutes (40°C)

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colour/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Recoat interval, min: Recoat interval, max: Surface condition: Remarks:

Brush/roller Conventional spray Fresh water (10%) Fresh water (5%) Fresh water 4 hours (10°C) 2 hours (20°C) None None

1 hour (40°C) None

The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. Use only when application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. A theoretical spreading rate cannot be calculated. For practical purposes, approximately 10 m²/litre is indicated depending on the surface roughness, the porosity of the concrete, the extent of thinning and the application method. The sealer is intended to saturate the surface - any surplus to be removed, preferably when the sealer is still wet. Drying data given is on the assumption that proper ventilation is provided. HEMPEL'S BINDER/SEALER 09810 is for professional use only. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas. HEMPEL A/S - 0981000000CS006

Note: Safety:

ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, see "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations given in this data sheet represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue.

Issued: October 2006

Page 1 of 1

HEMPEL Product Data Sheet

Product Data

HEMPEL'S ALKYD UNDERCOAT 22460

Description: Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: HEMPEL'S ALKYD UNDERCOAT 22460 is an alkyd intermediate coat for steel work and a primer for non-metallic surfaces. As an interior and exterior primer and intermediate coat in alkyd systems. Woodwork, timber, fibre-board, sealed masonry surfaces in dry rooms and primed steelwork. White/10000 Flat 54 ± 1 13.8 m²/litre - 40 micron* 42°C 1.4 kg/litre 5 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

APPLICATION DETAILS: Application method: Thinner (max.vol.): Cleaning of tools: Indicated film thickness dry: indicated film thickness wet: Recoat interval, min: Recoat interval, max: Surface condition:

Brush/roller Conventional spray Airless spray 08230 or 08110 (5%) 08230 (15%) 08230 (5%) THINNER 08230 or 08110 40 micron 75 micron 10 hours (10°C) 5 hours (20°C) 3 hours (40°C) None The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil. It is recommended to apply HEMPEL'S ALKYD UNDERCOAT 22460 prior to the specified filling procedure. HEMPEL'S ACRYLIC FILLER 38900. Drying data given is on the assumption that proper ventilation is provided. HEMPEL'S ALKYD UNDERCOAT 22460 is for professional use only. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas. HEMPEL A/S - 2246010000CS008

Filling: Remarks: Note: Safety:

ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, see "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations given in this data sheet represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue.

Issued: October 2006

Page 1 of 1

HEMPEL Product Data Sheet

Product Data

HEMPEL'S CONTEX SEALER 26600

Description: HEMPEL'S CONTEX SEALER 26600 is an alkali resistant, acrylic primer/sealer. Excellent penetration and dust binding properties on mineral substrates. Especially developed for use in HEMPEL'S CONTEX anticarbonation systems. Exterior: Walls. Concrete, masonry, cement rendering, asbestos, etc. White/10000 Flat 29 ± 1 9.7 m2/litre - 30 micron* 41°C 1.1 kg/litre 2 hours (10°C) 1 hour (20°C)

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

30 minutes (40°C)

*The theoretical spreading rate has been calculated for application on a primed and smooth surface. The actual rates may differ significantly as the sealer is intended to be applied on rough and porous substrates. The actual rates will also depend on the extent of thinning, the application method and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

APPLICATION DETAILS: Application method: Thinner (max. vol.): Nozzle orifice: Nozzle pressure: Cleaning of tools: Recoat interval, min: Recoat interval, max: Surface condition: Remarks: Note: Safety:

Airless spray Brush/roller 08080 (15%) 08080 (15%) .017"-.021" 100 bar/1450 psi (Airless spray data are indicative and subject to adjustment) THINNER 08080 2 hours (10°C) 1 hour (20°C) 30 minutes (40°C) None The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. Drying data is given on the assumption that proper ventilation is provided. HEMPEL'S CONTEX SEALER 26600 is for professional use only. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas. HEMPEL A/S - 2660010000CR004

ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, see "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations given in this data sheet represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue.

Issued: October 2006

Page 1 of 1

HEMPEL Product Data Sheet

Product Data

HEMPEL'S ACRYLIC PRIMER/SEALER 26630

Description: HEMPEL'S ACRYLIC PRIMER/SEALER 26630 is a solvent-borne alkali resistant acrylic primer/sealer with excellent penetration and dust binding properties. For use under solvent-borne as well as under water-borne coatings. Interior and exterior: Walls, ceilings, partitions, etc. Concrete, masonry, cement rendering, plaster, gypsum, wood, etc. White/10000 Flat 33 ± 1 11.0 m2/litre - 30 micron* 1.1 kg/litre 2 hours (10°C) 1 hour (20°C) 43°C

Area of use: Substrates: PHYSICAL CONSTANTS: Colour/Shade nos: Finish: Volume solids, %: Theoretical spreading rate Specific gravity: Dry to touch: Flash point:

30 minutes (40°C)

*The spreading rate has been calculated theoretically for application onto a primed and smooth surface. The actual rates may differ significantly as the primer/sealer is intended to be applied to rough and porous substrates. The actual rates will also depend on the extent of thinning, the application method and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Recoat interval, min: Recoat interval, max: Surface condition: Remarks: Note: Safety:

Brush/roller Conventional spray 08080 (15%) 08080 (30%) THINNER 08080 2 hours (10°C) 1 hour (20°C) None None

30 minutes (40°C) None

The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. Drying data given is on the assumption that proper ventilation is provided. HEMPEL'S ACRYLIC PRIMER/SEALER 26630 is for professional use only. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas. HEMPEL A/S - 2663010000CS007

ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, see "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations given in this data sheet represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue.

Issued: October 2006

Page 1 of 1

HEMPEL Product Data Sheet

Product Data

HEMPEL'S CONTEX PRIMER W/B 28600

Description: HEMPEL'S CONTEX PRIMER W/B 28600 is an alkali resistant waterborne acrylic primer/sealer in HEMPEL'S CONTEX anticarbonation system. Excellent penetration and dust binding properties on mineral substrates. Exterior: Walls Concrete, masonry, cement rendering etc. White/10000 Flat 26 ± 1 8.7 m2/litre - 30 micron* > 93°C 1.3 kg/litre 2 hours (10°C) 1 hour (20°C)

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos.: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

30 minutes (40°C)

*The spreading rate has been calculated theoretically for application onto a primed and smooth surface. The actual rates may differ significantly as the primer/sealer is intended to be applied to rough and porous substrates. The actual rates will also depend on the extent of thinning, the application method and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

APPLICATION DETAILS: Application method: Thinner (max. vol.): Nozzle orifice: Nozzle pressure: Cleaning of tools: Recoat interval, minimum: Recoat interval, maximum: Surface condition: Remarks: Note: Safety:

Airless spray Conventional spray Brush/roller Fresh water (5%) Fresh water (5%) Fresh water (10%) .021"-.023" 150-180 bar (Airless spray data are indicative and subject to adjustment) Fresh water 4 hours (10°C) 2 hours (20°C) 1 hour (40°C) None None None The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. HEMPEL'S CONTEX PRIMER W/B 28600 is for professional use only. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas. HEMPEL A/S - 2860010000CS001

ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, see "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations given in this data sheet represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue.

Issued: October 2006

Page 1 of 1

HEMPEL Product Data Sheet

Product Data

HEMPEL'S PRIMER/SEALER 28830

Description: Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: HEMPEL'S PRIMER/SEALER 28830 is a pigmented water-borne primer/sealer with excellent sealing and binding properties. Interior and exterior: Walls, ceilings, partitions, etc. Concrete, masonry, cement rendering, plaster, etc. White/10000 Flat 26 ± 1 8.7 m2/litre - 30 micron* > 93°C 1.3 kg/litre 2 hours (10°C) 1 hour (20°C)

30 minutes (40°C)

*The spreading rate has been calculated theoretically for application onto a primed and smooth surface. The actual rates may differ significantly as the primer/sealer is intended to be applied to rough and porous substrates. The actual rates will also depend on the extent of thinning, the application method and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Recoat interval, minimum: Recoat interval, maximum: Surface condition: Remarks: Note: Safety:

Brush/roller Conventional spray Fresh water (10%) Fresh water (5%) Fresh water 4 hours (10°C) 2 hours (20°C) None None

1 hour (40°C) None

The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. HEMPEL'S PRIMER/SEALER 28830 is for professional use only. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas. HEMPEL A/S - 2883010000CS005

ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, see "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations given in this data sheet represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue.

Issued: October 2006

Page 1 of 1

HEMPEL Product Data Sheet

Product Data

HEMPEL'S EPOXY FILLER 35230

BASE 35239 with CURING AGENT 95130

Description:

HEMPEL'S EPOXY FILLER 35230 is a two-component, high solid epoxy filler. It is a very hard, impact and chemical resistant material when cured. It can be applied in a dry film thickness of up to 10 mm without cracking. The product is easy to work with and has excellent filling properties. Can be recoated with solvent-borne primers/sealers and is the preferred filler for epoxy and polyurethane systems. As repair filler or levelling compound for interior and exterior areas. Concrete, steel and other rigid materials. Off-white/11630 Flat 98 ± 1 25°C 2.0 kg/litre 3 hours (20°C) 16 hours (20°C)

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Flash point: Specific gravity: Dry to touch: Ready to sand:

APPLICATION DETAILS: Mixing ratio for 35230: Application method: Thinner (max. vol.): Pot life: Cleaning of tools: Recoat interval, min: Recoat interval, max: Surface condition:

Base 35239 : Curing agent 95130 3 : 1 by volume Spatula, broad knife, steel trowel Do not dilute (when used as skim coat, 5% THINNER 08450 is recommended) 2 hours (20°C) TOOL CLEANER 99610 or THINNER 08450 24 hours (20°C) 30 days (20°C) (see REMARKS below) The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply an epoxy primer/sealer prior to the specified filling procedure. Use only where application and curing can proceed at temperatures above 5°C. The dry film thickness will be determined by the depth of crevices, blow-holes or the degree of surface irregularities. The practical spreading rate will alter accordingly. If the maximum recoating interval is exceeded, roughening of the surface is necessary. HEMPEL'S EPOXY FILLER 35230 is for professional use only. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas. HEMPEL A/S - 3523011630CS002

Remarks:

Note: Safety:

ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, see "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations given in this data sheet represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue.

Issued: October 2006

Page 1 of 1

HEMPEL Product Data Sheet

Product Data

HEMPEL'S FILLER 36610

Description: HEMPEL'S FILLER 36610 is an acrylic-based filler, thixotropic in appearance and content. It is a knifing filler which is smooth and easy to apply. The high solids content ensures excellent workability, smoothing and filling properties. Accepts a wide range of solvent and water-borne topcoats. Interior and exterior. Concrete, cement rendering, masonry, gypsum boards and wood. Off-white/11630 Flat 57 ± 1 1.9 m²/litre - 300 micron (when used as a skim coat) (see REMARKS below) 1.7 kg/litre 23°C 6 hours (10°C)3 hours (20°C) 1½ hours (40°C) 12 hours (10°C)6 hours (20°C) 3 hours (40°C) 48 hours (10°C)24 hours (20°C) 12 hours (40°C)

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Specific gravity: Flash point: Dry to touch: Dry to handle: Ready to sand:

APPLICATION DETAILS: Application method: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Surface condition:

Spatula, filling knife, steel trowel THINNER 08080 300 micron 550 micron 8 hours (10°C) 4 hours (20°C) None None

2 hours (40°C) None

The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler can be done prior to application of topcoats. The dry film thickness will be determined by the depth of the crevices, blowholes or the degree of surface irregularities. The practical spreading rate will be altered accordingly. Drying data is given on the assumption that proper ventilation is provided. HEMPEL'S FILLER 36610 is for professional use only. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas. HEMPEL A/S - 3661011630CS003

Remarks:

Note: Safety:

ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, see "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations given in this data sheet represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue.

Issued: October 2006

Page 1 of 1

HEMPEL Product Data Sheet

Product Data

HEMPEL'S INTERIOR FILLER 38820

Description: Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: Ready to sand: HEMPEL'S INTERIOR FILLER 38820 is a water-borne, acrylic-based filler with good smoothing properties. Recoatable with water-borne or solvent-borne coatings. Interior; Dry rooms: Walls, ceilings, partitions, etc. Concrete, masonry, cement rendering, asbestos, etc. Off-white/11630 Flat 49 ± 1 2.0 m²/litre - 250 micron (when used as a skim coat) (see REMARKS below) > 93°C 1.7 kg/litre 8 hours (10°C) 4 hours (20°C) 2 hours (40°C) 48 hours (10°C ) 24 hours (20°C) 12 hours (40°C)

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

APPLICATION DETAILS: Application method: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Surface condition:

Spatula, filling knife, steel trowel Fresh water 250 micron 500 micron 12 hours (10°C) 6 hours (20°C) None None

3 hours (40°C) None

The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. Use only where application and drying can proceed at temperatures above 5°C and relative humidity below 85%. Not recommended in rooms with high humidity such as bathrooms, kitchens, etc. The dry film thickness will be determined by the depth of crevices, blow-holes or the degree of surface irregularities. The practical spreading rate will alter accordingly. HEMPEL'S INTERIOR FILLER 38820 is not recommended for deep filling. Avoid applying at excessive film thickness. Drying data given is on the assumption that proper ventilation is provided. HEMPEL'S INTERIOR FILLER 38820 is for professional use only. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas. HEMPEL A/S - 3882011630CS003

Remarks:

Note: Safety:

ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, see "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations given in this data sheet represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue.

Issued: October 2006

Page 1 of 1

HEMPEL Product Data Sheet

Product Data

HEMPEL'S EXTERIOR FILLER 38830

Description: HEMPEL'S EXTERIOR FILLER 38830 is a water-borne, acrylic-based filler with excellent smoothing and filling properties. Can be topcoated with water-borne or solvent-borne systems. Interior and exterior: Walls, ceilings, partitions, etc. Concrete, masonry, cement rendering, plaster, gypsum boards, etc. Off-white/11630 Flat 49 ± 1 2.0 m²/litre - 250 micron (when used as a skim coat) (see REMARKS below) > 93°C 1.7 kg/litre 8 hours (10°C) 4 hours (20°C) 2 hours (40°C) 48 hours (10°C) 24 hours (20°C) 12 hours (40°C)

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: Ready to sand:

APPLICATION DETAILS: Application method: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Surface condition:

Spatula, filling knife, steel trowel Fresh water 250 micron 500 micron 12 hours (10°C) 6 hours (20°C) None None

3 hours (40°C) None

The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. The dry film thickness will be determined by the depth of crevices, blow-holes or the degree of surface irregularities. The practical spreading rate will alter accordingly. Drying data given is on the assumption that proper ventilation is provided. HEMPEL'S EXTERIOR FILLER 38830 is for professional use only. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas. HEMPEL A/S - 3883011630CS004

Remarks:

Note: Safety:

ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, see "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations given in this data sheet represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue.

Issued: October 2006

Page 1 of 1

HEMPEL Product Data Sheet

Product Data

HEMPEL'S SPATTER FINISH 38860

Description: HEMPEL'S SPATTER FINISH 38860 is a water-borne emulsion coating. The product has non-drip properties. The final appearance is determined by the application method. Different patterns can be obtained by using different application tools. Overcoating with solvent-borne or water-borne coatings is recommended to obtain best possible finish and wash ability. Interior and exterior: Walls, ceilings, partitions, etc. Concrete, cement rendering, plaster, gypsum boards, etc. White/10000 Flat 50 ± 1 2.0 m²/litre - 250 micron* > 93°C 1.7 kg/litre 8 hours (10°C) 4 hours (20°C)

-141 Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

2 hours (40°C)

*The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Recoat interval, min: Recoat interval, max: Surface condition:

Conventional spray None Fresh water 12 hours (10°C) None

Hopper gun None 6 hours (20°C) None

Air-mix spray None 3 hours (40°C) None

The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. Transparent: HEMPEL'S BINDER/SEALER 09810 Opaque: HEMPEL'S ACRYLIC PRIMER/SEALER 26630 Use only where applicaton and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Other primers or subsequent coats may be specified. Drying data given is on the assumption that proper ventilation is provided. HEMPEL'S SPATTER FINISH 38860 is for professional use only. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas. HEMPEL A/S - 3886010000CS002

Sealing: Remarks:

Note: Safety:

ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, see "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations given in this data sheet represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue.

Issued: October 2006

Page 1 of 1

HEMPEL Product Data Sheet

Product Data

HEMPEL'S ACRYLIC FILLER 38900

Description: HEMPEL'S ACRYLIC FILLER 38900 is a high-grade, flexible water-borne acrylic filler. The high solids content ensures excellent workability, smoothing and filling properties. Ideal for filling joints in gypsum boards. Can be used as a repair filler or for full skimcoat application. HEMPEL'S ACRYLIC FILLER 38900 can be overcoated with solventborne or water-borne coatings without use of a primer/sealer. Interior and exterior: Walls, ceilings, partitions, etc. Concrete, masonry, gypsum boards, plaster, asbestos, wood, etc. Off-white/11630 Flat 57 ± 1 1.9 m²/litre - 300 micron (when applied as a skim coat)* > 93°C 1.8 kg/litre 8 hours (10°C) 4 hours (20°C) 2 hours (40°C) 48 hours (20°C) 24 hours (20°C) 12 hours (40°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: Ready to sand:

APPLICATION DETAILS: Application method: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Surface condition:

Spatula, filling knife, steel trowel Fresh water 300 micron 525 micron 12 hours (10°C) 6 hours (20°C) None None

3 hours (40°C) None

The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Use only where applicaton and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. HEMPEL'S ACRYLIC FILLER 38900 is for professional use only. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas. HEMPEL A/S - 3890011630CS002

Remarks: Note: Safety:

ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, see "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations given in this data sheet represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue.

Issued: October 2006

Page 1 of 1

HEMPEL Product Data Sheet

Product Data

HEMPEL'S EPOXY TEXTURE 45450

BASE 45459 with CURING AGENT 95210 Description: HEMPEL'S EPOXY TEXTURE 45450 is a two-component, high-solids epoxy product, which is specially formulated to be applied by spray to obtain a textured surface with different patterns. When topcoated with polyurethane finishes, a high-grade system, suitable for outdoor exposure is obtained. Interior and exterior: Ceilings and walls. Concrete, masonry, cement rendering, plaster, etc. White/10000 Flat 60 ± 1 6.0 m²/litre - 100 micron* 12°C 1.5 kg/litre 2 hours (10°C) 1 hour (20°C)

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

30 minutes (40°C)

*The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

APPLICATION DETAILS: Mixing ratio for 45450: Application method: Thinner (max. vol.): Cleaning of tools: Pot life: Recoat interval, min: Recoat interval, max: Safety:

Base 45459 : Curing agent 95210 9 : 1 by volume Hopper gun Airless spray 08450 (5%) 08450 (5%) THINNER 08450 6 hours (10°C) 3 hours (20°C) 2 hours (10°C) 1 hour (20°C) None None

30 minutes (40°C) None

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S EPOXY TEXTURE 45450 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand loose old paint, laitance, dirt, grease and oil. It is recommended to apply an epoxy primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. HEMPEL'S EPOXY FILLER 35230 HEMPEL'S EPOXY SEALER 05990 Use only where application and curing can proceed at temperatures above 5°C. Other sealer/filler types may be specified. Drying data given is on the assumption that proper ventilation is provided. HEMPEL'S EPOXY TEXTURE 45450 is for professional use only. HEMPEL A/S - 4545010000CS004

FILLING: SEALING: REMARKS: Note: ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S CONTEX®SMOOTH 46600

Description: HEMPEL'S CONTEX SMOOTH 46600 is an alkali resistant, acrylic topcoat in HEMPEL'S CONTEX anticarbonation system. The product is water-repellent, but allows water vapour from the substrate to pass through the paint film. Has a smooth flat finish. Exterior: Walls. Concrete, masonry, cement rendering, asbestos, etc. White/10000 or according to HEMPEL's colour card Flat 36 ± 1 7.2 m2/litre - 50 micron* 44°C 1.3 kg/litre 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Nozzle orifice: Nozzle pressure: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Airless spray Brush/roller 08080 (5%) 08080 (5%) .025"-.027" 100 bar/1450 psi (Airless spray data are indicative and subject to adjustment) THINNER 08080 50 micron 125 micron 2 hours (20°C) None Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S CONTEX SMOOTH 46600 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. HEMPEL'S FILLER 36610. HEMPEL'S CONTEX SEALER 26600 or HEMPEL'S ACRYLIC PRIMER/SEALER 26630. Drying data is given on the assumption that proper ventilation is provided. To obtain the best result, follow HEMPEL's recommended painting specifications for HEMPEL'S CONTEX anticarbonation system. Please also see HEMPEL'S product information for HEMPEL'S CONTEX 46600. HEMPEL'S CONTEX SMOOTH 46600 is for professional use only. HEMPEL A/S - 4660010000CS005

FILLING: SEALING: REMARKS:

Note: ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S CONTEX®SMOOTH W/B 48600

Description: HEMPEL'S CONTEX SMOOTH W/B 48600 is a waterborne alkali resistant, acrylic topcoat in HEMPEL'S CONTEX anticarbonation system. The product is water-repellent, but allows water vapour from the substrate to pass through the paint film. May also be used as a roof coating on terraces and roofs with only sporadic and light traffic. The product has a smooth and flat finish. Exterior: Walls. Concrete, masonry, cement rendering, asbestos, etc. White/10000 or according to HEMPEL's colour card Flat 47 ± 1 6.3 m2/litre - 75 micron* > 93°C 1.3 kg/litre 4 hours/10°C 2 hours (20°C) 1 hour (40°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Nozzle orifice: Nozzle pressure: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, maximum: Safety:

Airless spray Brush/roller Fresh water (5%) Fresh water (5%) .023"-.025" 150-180 bar (Airless spray data are indicative and subject to adjustment) Fresh water 75 micron 150 micron 12 hours (10°C) 6 hours (20°C) 3 hours (40°C) None None None Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S CONTEX SMOOTH W/B 48600 SURFACE CONDITION: FILLING: SEALING: REMARKS: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. HEMPEL'S EXTERIOR FILLER 38830 or HEMPEL'S ACRYLIC FILLER 38900. HEMPEL'S CONTEX PRIMER W/B 28600. Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C, and relative humidity below 85%. Drying data is given on the assumption that proper ventilation is provided. To obtain the best result, follow HEMPEL's recommended painting specifications for HEMPEL'S CONTEX anticarbonation system. HEMPEL'S CONTEX SMOOTH W/B 48600 is for professional use only. HEMPEL A/S - 4860010000CS002

Note: ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S SMOOTH TEXTURE 48740

Description: HEMPEL'S SMOOTH TEXTURE 48740 is a high-build, water-borne coating. The product has non-drip properties and different patterns can be obtained by combining different application tools. Must be recoated to obtain desired colour and gloss. Interior and exterior: Walls, ceilings, partitions, etc. Concrete, masonry, cement rendering, asbestos, etc. Off-white/11630 Flat 54 ± 1 3.7 m²/litre - 150 micron* > 93°C 1.6 kg/litre 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max.vol.): Cleaning of tools: Indicated film thickness, dry: indicated film thickness, wet: Recoat interval, min: Recoat interval, max Safety:

Brush/roller Air-mix spray/Airless spray None None Fresh water 150 micron 275 micron 8 hours (10°C) 4 hours (20°C) None None

2 hours (40°C) None

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S SMOOTH TEXTURE 48740 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. HEMPEL'S FILLER 36610 or HEMPEL'S ACRYLIC FILLER 38900 Transparent: Opaque: HEMPEL'S BINDER/SEALER 09810 HEMPEL'S ACRYLIC PRIMER/SEALER 26630

FILLING: SEALING: REMARKS: Note: ISSUED BY:

Drying data given is on the assumption that proper ventilation is provided. Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Other sealer/filler types may be specified. HEMPEL'S SMOOTH TEXTURE 48740 is for professional use only. HEMPEL A/S - 4874011630CS004

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained under controlledrecommendations given in this data Their accuracy, completeness or or Data, specifications, directions and or specially defined circumstances. sheet represent only test results appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF exclusively by the Buyer and/or User. SALES, DELIVERY AND SERVICE, technical assistance is given subject writing. The Manufacturer and SellerOF The Products are supplied and all unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S GLOSS ENAMEL 52040

Description: HEMPEL'S GLOSS ENAMEL 52040 is a superior alkyd topcoat available in a wide range of colours. The product is ideally suited for kitchens and bathrooms, doors, window frames, furniture and woodwork in general. Also ideal for metal surfaces. Approved according to SASO standard 472-1986, gloss enamel for interior and exterior surfaces. Interior and exterior. Metal surfaces, woodwork, fibre-boards, etc. White/10000 or according to HEMPEL's colour card High gloss 46 ± 1 15.3 m²/litre - 30 micron* 38°C 1.1 kg/litre 6 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller Conventional spray 08230 or 08110(5%) 08230 (15%) THINNER 08230 or 08110 30 micron 75 micron 8 hours (20°C) None

Airless spray 08230 (5%)

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S GLOSS ENAMEL 52040 SURFACE CONDITION: FILLING: PRIMER: REMARKS: Note: ISSUED BY: The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil. It is recommended to apply a primer prior to the specified filling procedure. Touch-up with primer on areas repaired with filler is recommended prior to application of topcoats. HEMPEL'S ACRYLIC FILLER 38900. On ferrous metal: On wood: HEMPALIN PRIMER 12050 HEMPEL'S ALKYD UNDERCOAT 22460

Other primer/filler types may be specified. Drying data given is on the assumption that proper ventilation is provided. HEMPEL'S GLOSS ENAMEL 52040 is for professional use only. HEMPEL A/S - 5204010000CS005

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S FLAT ENAMEL 52060

Description: HEMPEL'S FLAT ENAMEL 52060 is a superior alkyd topcoat. The product is ideally suited for kitchens and bathrooms, doors, window frames, furniture and woodwork in general. Also ideal for metal surfaces. Interior and exterior. Metal surfaces, woodwork, fibre-boards, etc. White/10000 or according to HEMPEL's colour card Flat 40 ± 1 13.3 m²/litre - 30 micron* 38°C 1.3 kg/litre 2 hours (20°C ) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller Conventional spray 08230 or 08110(5%) 08230 (15%) THINNER 08230 or 08110 30 micron 75 micron 8 hours (20°C) None

Airless spray 08230 (5%)

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S FLAT ENAMEL 52060 SURFACE CONDITION: FILLING: PRIMER: REMARKS: Note: ISSUED BY: The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. HEMPEL'S ACRYLIC FILLER 38900. On ferrous metal: On wood: HEMPALIN PRIMER 12050 HEMPEL'S ALKYD UNDERCOAT 22460

Other primer/filler types may be specified. Drying data given is on the assumption that proper ventilation is provided. HEMPEL'S FLAT ENAMEL 52060 is for professional use only. HEMPEL A/S - 5206010000CS004

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S SEMI-GLOSS ENAMEL 52080

Description: HEMPEL'S SEMI-GLOSS ENAMEL 52080 is a superior alkyd topcoat. The product is ideally suited for kitchens and bathrooms, doors, window frames, furniture and woodwork in general. Also ideal for metal surfaces. Interior and exterior. Metal surfaces, woodwork, fibre-boards, etc. White/10000 or according to HEMPEL's colour card Semi-gloss 47 ± 1 15.7 m²/litre - 30 micron* 38°C 1.2 kg/litre 4 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller Conventional spray 08230 or 08110 (5%) 08230 (15%) THINNER 08230 or 08110 30 micron 75 micron 8 hours (20°C) None

Airless spray 08230 (5%)

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S SEMI-GLOSS ENAMEL 52080 SURFACE CONDITION: FILLING: PRIMER: REMARKS: Note: ISSUED BY: The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil. It is recommended to apply a primer prior to the specified filling procedure. Touch-up with primer on areas repaired with filler is recommended prior to application of topcoats HEMPEL'S ACRYLIC FILLER 38900. On ferrous metal: On wood: HEMPALIN PRIMER 12050 HEMPEL'S ALKYD UNDERCOAT 22460

Other primer/filler types may be specified. Drying data given is on the assumption that proper ventilation is provided. HEMPEL'S SEMI-GLOSS ENAMEL 52080 is for professional use only. HEMPEL A/S - 5208010000CS004

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S METALLIC PAINT 52410

Description: Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: HEMPEL'S METALLIC PAINT 52410 is a superior alkyd topcoat. The product is highly pigmented with micaceous iron oxide (MIO) to provide a special metallic textured finish. Interior and exterior. Metal surfaces, woodwork, fibre-boards, etc. Black/12650 - Light grey/12660 Flat 55 ± 1 13.8 m²/litre - 40 micron* 41°C 1.7 kg/litre 6 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller 08230 or 08110 (5%) THINNER 08230 or 08110 40 micron 75 micron 12 hours (20°C) None Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S METALLIC PAINT 52410 SURFACE CONDITION: FILLING: PRIMER: REMARKS: Note: ISSUED BY: The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. HEMPEL'S ACRYLIC FILLER 38900. On ferrous metal: On wood: HEMPALIN PRIMER 12050 HEMPEL'S ALKYD UNDERCOAT 22460

Other primer/filler types may be specified. Drying data given is on the assumption that proper ventilation is provided. HEMPEL'S METALLIC PAINT 52410 is for professional use only. HEMPEL A/S - 5241012650CS002

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPALUX®GLOSS 52940

Description: HEMPALUX GLOSS 52940 is a superior alkyd topcoat with improved colour retention. The product is ideally suited for doors, window frames, furniture and woodwork in general where a high quality finish is required. Also ideal for primed metal surfaces. The product has excellent hiding power and is easy to apply. Interior and exterior. Metal surfaces, woodwork, fibre-boards, etc. White/14800 or according to HEMPEL's colour card High gloss 43 ± 1 14.3 m²/litre - 30 micron* 33°C 1.2 kg/litre 4 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller 08230 or 08110(5%) THINNER 08230 or 08110 30 micron 75 micron 8 hours (20°C) None

Conventional spray 08230 (15%)

Airless spray 08230 (5%)

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPALUX GLOSS 52940 SURFACE CONDITION: FILLING: PRIMER: REMARKS: Note: ISSUED BY: The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil. It is recommended to apply a primer prior to the specified filling procedure. Touch-up with primer on areas repaired with filler is recommended prior to application of topcoats. HEMPEL'S ACRYLIC FILLER 38900. On ferrous metal: On wood: HEMPALIN PRIMER 12050 HEMPEL'S ALKYD UNDERCOAT 22460

Other primer/filler types may be specified. Drying data given is on the assumption that proper ventilation is provided. HEMPALUX GLOSS 52940 is for professional use only. HEMPEL A/S - 5294014800CS001

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPALUX®SEMI-GLOSS 52980

Description: HEMPALUX SEMI-GLOSS 52980 is a superior alkyd topcoat with improved colour retention. The product is ideally suited for doors, window frames, furniture and woodwork in general where a high quality finish is required. Also ideal for primed metal surfaces. The product has excellent hiding power and is easy to apply. Interior and exterior. Metal surfaces, woodwork, fibre-boards, etc. White/14900 or according to HEMPEL's colour card Semi-gloss 48 ± 1 16.0 m²/litre - 30 micron* 38°C 1.4 kg/litre 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1..

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller Conventional spray 08230 or 08110 (5%) 08230 (15%) THINNER 08230 or 08110 30 micron 75 micron 4 hours (20°C) None

Airless spray 08230 (5%)

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPALUX SEMI-GLOSS 52980 SURFACE CONDITION: FILLING: PRIMER: REMARKS: Note: ISSUED BY: The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil. It is recommended to apply a primer prior to the specified filling procedure. Touch-up with primer on areas repaired with filler is recommended prior to application of topcoats HEMPEL'S ACRYLIC FILLER 38900. On ferrous metal: On wood: HEMPALIN PRIMER 12050 HEMPEL'S ALKYD UNDERCOAT 22460

Other primer/filler types may be specified. Drying data given is on the assumption that proper ventilation is provided. HEMPALUX SEMI-GLOSS 52980 is for professional use only. HEMPEL A/S - 5298014900CS001

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPATHANE®ENAMEL 55100

BASE 55109 with CURING AGENT 95370 Description: HEMPATHANE ENAMEL 55100 is a two-component, acrylic polyurethane enamel with excellent gloss and colour retention. The product has good resistance to water, impact and abrasion. Easy to clean. Interior and exterior: Walls. Concrete, masonry, cement rendering, asbestos, etc. White/10000 or according to HEMPEL's colour card High-gloss 52 ± 1 14.9 m2/litre - 35 micron* 35°C 1.3 kg/litre 4-5 hours (20°C) 7 days at 20°C *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: Fully cured:

APPLICATION DETAILS: Mixing ratio for 55100: Application method: Thinner (max. vol.): Pot life: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Base 55109 : Curing Brush/roller 08080 (5%) 2 hours (20°C) THINNER 08080 35 micron 75 micron 8 hours (20°C) None

agent 95370 Conventional spray 08080 (25%) ½ hour (40°C)

7 : 1 by volume (see REMARKS below)

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPATHANE ENAMEL 55100 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. HEMPEL'S EPOXY FILLER 35230. HEMPEL'S EPOXY SEALER 05990. Drying data is given on the assumption that proper ventilation is provided. High humidity and/or condensation during application and the following 16 hours (20°C/68°F) may adversely affect the film formation. When applying HEMPATHANE ENAMEL 55100 by spray, thinning is recommended to obtain the best possible finish. The necessary amount of thinning will depend on the actual conditions. Curing agent 95370 is sensitive to moisture. Store in a dry place and keep cans tightly closed until use. Open cans with caution due to possible high pressure. Even small traces of water in the mixed paint will reduce pot life and result in film defects. HEMPATHANE ENAMEL 55100 is for professional use only. HEMPEL A/S - 5510010000CO006

FILLING: SEALING: REMARKS:

Note:

ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPATHANE®TOPCOAT 55210

BASE 55219 with CURING AGENT 95370 Description: HEMPATHANE TOPCOAT 55210 is a two-component, acrylic polyurethane coating with good gloss and colour retention. The product has good resistance to water, impact and abrasion. Easy to clean. Interior and exterior: Walls. Concrete, masonry, cements rendering, asbestos, etc. White/10000 or according to HEMPEL's colour card Semi-gloss 51 ± 1 10.2 m2/litre - 50 micron* 33°C 1.2 kg/litre 8 hours (20°C) 7 days at 20°C *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: Fully cured:

APPLICATION DETAILS: Mixing ratio for 55210: Application method: Thinner (max. vol.): Pot life: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Base 55219 : Curing agent 95370 7 : 1 by volume Brush/roller Conventional spray 08080 (5%) 08080 (25%) (see REMARKS below) 4 hours (20°C) 1 hour (40°C) THINNER 08080 50 micron 100 micron 8 hours (20°C) None Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: September 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPATHANE TOPCOAT 55210 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. HEMPEL'S EPOXY FILLER 35230. HEMPEL'S EPOXY SEALER 05990. Drying data is given on the assumption that proper ventilation is provided. High humidity and/or condensation during application and the following 16 hours (20°C/68°F) may adversely affect the film formation. When applying HEMPATHANE TOPCOAT 55210 by spray, thinning is recommended to obtain the best possible finish. The necessary amount of thinning will depend on the actual conditions. Curing agent 95370 is sensitive to moisture. Store in a dry place and keep cans tightly closed until use. Open cans with caution due to possible high pressure. Even small traces of water in the mixed paint will reduce pot life and result in film defects. HEMPATHANE TOPCOAT 55210 is for professional use only. HEMPEL A/S - 5521010000CO011

FILLING: SEALING: REMARKS:

Note:

ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: September 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPATEX®ENAMEL 56360

Description: HEMPATEX ENAMEL 56360 is an acrylic finishing coat with good resistance to UV light. Has good colour and gloss retention. Ideal as a topcoat in HEMPATEX and HEMPADUR systems. Can be used on alkaline substrates. Available in a wide range of colours. Interior and exterior: Walls. Concrete, masonry, cement rendering, asbestos, etc. White/10000 or according to HEMPEL's colour card Semi-gloss 32 ± 1 9.1 m2/litre - 35 micron* 25°C 1.1 kg/litre 3-4 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller Conventional spray 08080 (5%) 08080 (15%) THINNER 08080 35 micron 100 micron 4 hours (20°C) None Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPATEX ENAMEL 56360 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. HEMPEL'S FILLER 36610 or HEMPEL'S ACRYLIC FILLER 38900. HEMPEL'S ACRYLIC PRIMER/SEALER 26630. Drying data is given on the assumption that proper ventilation is provided. As HEMPATEX ENAMEL 56360 is a thermoplastic product, prolonged direct contact at temperatures above approx. 40°C may cause film indentation. When the temperature drops below, the mechanical strength is recovered. HEMPATEX ENAMEL 56360 is for professional use only. HEMPEL A/S - 5636010000CO014

FILLING: SEALING: REMARKS:

Note: ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S CONTEX®FINE 56610

Description: HEMPEL'S CONTEX FINE 56610 is an alkali resistant, acrylic topcoat in HEMPEL'S CONTEX anti-carbonation system. The product is water-repellent, but allows water vapour from the substrate to pass through the paint film. The product has an attractive fine granular textured finish. Exterior: Walls. Concrete, masonry, cement rendering, asbestos, etc. White/10000 or according to HEMPEL's colour card Flat 53 ± 1 3.5 m2/litre - 150 micron* 44°C 1.6 kg/litre 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Conventional spray 08080 (5%) THINNER 08080 150 micron 275 micron 2 hours (20°C) None

Hopper Gun Brush/roller (small areas) 08080 (5%) 08080 (15%)

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S CONTEX FINE 56610 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. HEMPEL'S FILLER 36610. HEMPEL'S CONTEX SEALER 26600 or HEMPEL'S ACRYLIC PRIMER/SEALER 26630. HEMPEL'S CONTEX SMOOTH 46600. Drying data is given on the assumption that proper ventilation is provided. HEMPEL'S CONTEX FINE 56610 is for professional use only. HEMPEL A/S - 5661010000CS004

FILLING: SEALING: INTERMEDIATE COAT: REMARKS: Note: ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S CONTEX®MEDIUM 56620

Description: HEMPEL'S CONTEX MEDIUM 56620 is a topcoat in HEMPEL'S CONTEX anticarbonation system. The product is water-repellent, but allows water vapour from the substrate to pass through the paint film. HEMPEL'S CONTEX MEDIUM 56620 has an attractive medium granular texture. Exterior: Walls. Concrete, masonry, cement rendering, asbestos, etc. White/10000 or according to HEMPEL's colour card Flat 58 ± 1 3.9 m2/litre - 150 micron* 44°C 1.7 kg/litre 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoating interval, max: Safety:

Conventional spray Hopper Gun None 08080 (5%) THINNER 08080 150 micron 250 micron 2 hours (20°C) None

Brush/roller (small areas) 08080 (15%)

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S CONTEX MEDIUM 56620 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. HEMPEL'S FILLER 36610. HEMPEL'S CONTEX SEALER 26600 or HEMPEL'S ACRYLIC PRIMER/SEALER 26630. HEMPEL'S CONTEX SMOOTH 46600. Drying data is given on the assumption that proper ventilation is provided. HEMPEL'S CONTEX MEDIUM 56620 is for professional use only. HEMPEL A/S - 5662010000CS004

FILLING: SEALING: INTERMEDIATE COAT: REMARKS: Note: ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMUCRYL®ENAMEL 58100

Description: Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: HEMUCRYL ENAMEL 58100 is a water-borne acrylic-based paint. It dries to a nonyellowing and glossy finish with excellent colour and gloss retention. Interior and exterior: Walls, ceilings, roofs and primed structural steel. Concrete, masonry, cement rendering, asbestos and steel. White/10000 or according to HEMPEL's colour card Glossy 41 ± 1 10.3 m2/litre - 40 micron* > 93°C 1.3 kg/litre 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller Fresh water (5%) Fresh water 40 micron 100 micron 6 hours (20°C) None Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMUCRYL ENAMEL 58100 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. Interior: Exterior: Transparent: Opaque: HEMPEL'S INTERIOR FILLER 38820 HEMPEL'S FILLER 36610 or HEMPEL'S ACRYLIC FILLER 38900 HEMPEL'S BINDER/SEALER 09810 HEMPEL'S ACRYLIC PRIMER/SEALER 26630

FILLING:

SEALING: REMARKS:

Note: ISSUED BY:

Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Drying data is given on the assumption that proper ventilation is provided. Other sealer/filler types may be specified. For use on buildings, the relatively high resistance to diffusion of water vapour and carbon dioxide should be taken into account. HEMUCRYL ENAMEL 58100 is for professional use only. HEMPEL A/S - 5810010000CO010

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMUCRYL®TOPCOAT HI-BUILD 58230

Description: HEMUCRYL TOPCOAT HI-BUILD 58230 is a water-borne acrylic based paint. It dries to a non-yellowing and semi-flat finish and has excellent colour retention. It has low dirt pickup and good weathering properties and good wash ability. Interior and exterior: Walls, ceilings, roofs and primed structural steel. Concrete, masonry, cement rendering, asbestos and steel. White/10000 or according to HEMPEL's colour card Semi-flat 42 ± 1 5.6 m2/litre - 75 micron* > 93°C 1.2 kg/litre 1½ hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller Fresh water (5%) Fresh water 75 micron 175 micron 2 hours (20°C) None Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMUCRYL TOPCOAT HI-BUILD 58230 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. Interior: Exterior: Transparent: Opaque: HEMPEL'S INTERIOR FILLER 38820 HEMPEL'S FILLER 36610 or HEMPEL'S ACRYLIC FILLER 38900 HEMPEL'S BINDER/SEALER 09810 HEMPEL'S ACRYLIC PRIMER/SEALER 26630

FILLING:

SEALING: REMARKS:

Note: ISSUED BY:

Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Drying data is given on the assumption that proper ventilation is provided. Other sealer/filler types may be specified. For use on buildings, the relatively high resistance to diffusion of water vapour and carbon dioxide should be taken into account. HEMUCRYL TOPCOAT HI-BUILD 58230 is for professional use only. HEMPEL A/S - 5823010000CO006

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S ACRYLIC SILK EMULSION 58260

Description: HEMPEL'S ACRYLIC SILK EMULSION 58260 is a water-borne, acrylic-based paint with excellent colour and gloss stability giving a silk gloss finish. The product is washable, has good water repellence and adhesion to aged alkyd paints is good. Interior and exterior: Walls, ceilings, partitions, etc. Concrete, masonry, cement rendering, plaster, woodwork, etc. White/10000 or pastel colours according to HEMPEL's colour card Semi-gloss 39 ± 1 11.1 m²/litre - 35 micron* > 93°C 1.2 kg/litre 2 hours (20°C) 1 hour (40°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller None Fresh water 35 micron 100 micron 8 hours (10°C) None

Airless spray Fresh water (5%)

4 hours (20°C) None

2 hours (40°C)

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S ACRYLIC SILK EMULSION 58260 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. HEMPEL'S FILLER 36610 or HEMPEL'S ACRYLIC FILLER 38900 Transparent: Opaque: HEMPEL'S BINDER/SEALER 09810 HEMPEL'S ACRYLIC PRIMER/SEALER 26630

FILLING: SEALING: REMARKS:

Note: ISSUED BY:

Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Other sealer/filler types may be specified. HEMPEL'S ACRYLIC SILK EMULSION 58260 is for professional use. HEMPEL A/S - 5826010000CS005

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S NON-DRIP ACRYLIC EMULSION 58270

Description: HEMPEL'S NON-DRIP ACRYLIC EMULSION 58270 is a water-borne, acrylic-based paint with excellent colour and gloss stability giving a smooth silk gloss finish. The product is washable and has good alkali resistance. Interior and exterior: Walls, ceilings, partitions, etc. Concrete, masonry, cement rendering, plaster, etc. White/10000 or pastel colours according to HEMPEL's colour card Semi-flat 39 ± 1 11.1 m²/litre - 35 micron* > 93°C 1.2 kg/litre 1 hour (20°C) ½ hour (40°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller None Fresh water 35 micron 100 micron 8 hours (10°C) None

Airless spray Fresh water (5%)

4 hours (20°C) None

2 hours (40°C)

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S NON-DRIP ACRYLIC EMULSION 58270 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. HEMPEL'S FILLER 36610 or HEMPEL'S ACRYLIC FILLER 38900 Transparent: Opaque: HEMPEL'S BINDER/SEALER 09810 HEMPEL'S ACRYLIC PRIMER/SEALER 26630

FILLING: SEALING: REMARKS:

Note: ISSUED BY:

Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Other sealer/filler types may be specified. Drying data given is on the assumption that proper ventilation is provided. HEMPEL'S NON-DRIP ACRYLIC EMULSION 58270 is for professional use. HEMPEL A/S - 5827010000CS001

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained under controlledrecommendations given in this data Their accuracy, completeness or or Data, specifications, directions and or specially defined circumstances. sheet represent only test results appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF exclusively by the Buyer and/or User. SALES, DELIVERY AND SERVICE, technical assistance is given subject writing. The Manufacturer and SellerOF The Products are supplied and all unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S SILK EMULSION 58330

Description: Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: HEMPEL'S SILK EMULSION 58330 is a water-borne quality coating. The coating is washable and has a silk gloss and smooth finish. Interior and exterior: Walls, ceilings, partitions. Concrete, masonry, cement rendering, gypsum boards, asbestos, etc. White/10000 or according to HEMPEL'S colour card Semi-flat 28 ± 1 8.0 m²/litre - 35 micron* > 93°C 1.2 kg/litre 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller Fresh water (20%) Fresh water 35 micron 125 micron 8 hours (10°C) None

Conventional spray Fresh water (10%)

Airless spray Fresh water (5%)

4 hours (20°C) None

2 hours (40°C) None

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S SILK EMULSION 58330 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. Interior: Exterior: Transparent: Opaque: HEMPEL'S INTERIOR FILLER 38820 HEMPEL'S EXTERIOR FILLER 38830 or HEMPEL'S ACRYLIC FILLER 38900 HEMPEL'S BINDER/SEALER 09810 HEMPEL'S PRIMER/SEALER 28830

FILLING:

SEALING: REMARKS:

Note: ISSUED BY:

Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Other sealer/filler types may be specified. HEMPEL'S SILK EMULSION 58330 is for professional use only. HEMPEL A/S - 5833010000CS005

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S CONTRACT EMULSION 58410

Description: HEMPEL'S CONTRACT EMULSION 58410 is an economic, water-borne, acrylic, decorative coating, which has a flat and smooth finish. Interior: Walls, ceilings partitions. Concrete, masonry, woodwork. White/10000 or according to HEMPEL'S colour card Flat 30 ± 1 10.0 m²/litre - 30 micron* > 93°C 1.6 kg/litre 1 hour (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller Fresh water (20%) Fresh Water 30 micron 100 micron 4 hours (10°C) None

Conventional spray Fresh water (10%)

Airless spray Fresh water (5%)

2 hours (20°C) None

1 hour (40°C) None

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S CONTRACT EMULSION 58410 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. HEMPEL'S INTERIOR FILLER 38820 Transparent: HEMPEL'S BINDER/SEALER 09810 Opaque: HEMPEL'S PRIMER/SEALER 28830 Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Other sealer/filler types may be specified. HEMPEL'S CONTRACT EMULSION 58410 is for professional use only. HEMPEL A/S - 5841010000CS002

FILLING: SEALING: REMARKS:

Note: ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S WALL VARNISH 58440

Description: HEMPEL'S WALL VARNISH 58440 is a water-borne acrylic coating. The product is transparent and is available as a clear coat or in pearlished finishes. The product has good resistance to UV light. Interior and Exterior: Walls, ceilings partitions etc. Concrete, masonry, cement rendering, gypsum boards, etc. Clear/00000 or pearlescent colours Glossy 38 ± 1 7.4 m²/litre - 50 micron* > 66°C 1.0 kg/litre 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller (None) Fresh Water 50 micron 125 micron 4 hours (20°C) None Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: November 2009

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S WALL VARNISH 58440

SURFACE CONDITION: UNDERCOAT: REMARKS:

The surface should be stable, firm, dry and free of contaminants like dust, old paint, dirt, oil, grease and algae. HEMPEL'S FLAT EMULSION 58710, HEMPEL'S WALLART 58470 or according to specification. Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Drying data is given on the assumption that proper ventilation is provided. Apply one or more coats to obtain the desired colour and a uniform appearance. As the product is transparent, the resulting colour will depend on the colour of the substrate. HEMPEL'S WALL VARNISH 58440 is for professional use only. HEMPEL A/S - 5844000000CR004

Note: ISSUED BY:

This Product Data Sheet supersedes those previously issued. For Product Data Sheet supersedes those previously issued. Thisexplanations, definitions and scope, see "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations given in this dataHEMPEL Book. only test results or For explanations, definitions and scope, see "Explanatory Notes" in the sheet represent experience obtained directions and recommendations given in this data sheet represent only test results or Data, specifications, under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the controlled or specially defined circumstances. Their accuracy, completeness or experience obtained under actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively by are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF Products are supplied and all technical assistance is given subject to in writing. The Manufacturer and TheSALES, DELIVERY AND SERVICE, unless otherwise expressly agreed HEMPEL's GENERAL CONDITIONS OF Seller disclaim, and Buyer and/or User otherwise expressly agreed in liability, including but not limited to SALES, DELIVERY AND SERVICE, unless waive all claims involving, any writing. The Manufacturer and Seller negligence, except and/or User in said GENERAL CONDITIONS for all including but or limited to disclaim, and Buyeras expressedwaive all claims involving, any liability, results, injurynot direct or negligence, consequential lossesin said GENERAL CONDITIONS useall results, injuryas recommended above, on the overleaf except as expressed or damages arising from the for of the Products or direct or consequential losses or or otherwise. damages arising from the use of the Products as recommended above, on the overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue.

Issued: November 2009

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S WALLART 58470

Description: HEMPEL'S WALLART 58470 is a water-borne, acrylic based, decorative coating. It has been developed specifically for creating decorative effects, such as; marbling, sponging, rag-rolling. Interior: Walls. Concrete, masonry, gypsum boards, cement rendering etc. White/10000 or according to HEMPEL'S colour card Semi-flat 31 ± 1 10.3 m²/litre - 30 micron* > 93°C 1.1 kg/litre 2 hours (20°C) 1 hour (40°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, the pattern/effect selected, the skill of the applicator and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller/sponge/rag/spatula depending on desired finish. Fresh water (20%) Fresh water 30 micron 100 micron 8 hours (10°C) 4 hours (20°C) 2 hour (40°C) None None None Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S WALLART 58470 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. HEMPEL'S FLAT EMULSION 58710 To obtain a glossy finish a clear coat of HEMPEL'S WALL VARNISH 58440 may be applied. Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Other undercoats may be specified. HEMPEL'S WALLART 58470 is for professional use only. HEMPEL A/S - 5847000010CS001

UNDERCOAT: OVERCOATING: REMARKS:

Note: ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations given in this data HEMPEL Book. For explanations, definitions and scope, see "Explanatory Notes" in thesheet represent only test results or experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any intended use of the Products accuracy, completeness or experience obtained under controlled or specially defined circumstances. Their herein must be determined exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S SILK TEXTURE 58540

Description: HEMPEL'S SILK TEXTURE 58540 is a water-borne paint, which has an excellent lighttextured finish. The product is flexible and has non-drip properties. The final appearance is determined by the application method. Different patterns can be obtained by using various types of textured rollers. Interior and exterior: Walls, ceilings, partitions. Concrete, masonry, cement rendering, gypsum boards, asbestos, etc. White/10000 or according to HEMPEL'S colour card Semi-flat 45 ± 1 11.3 m²/litre - 40 micron* > 93°C 1.3 kg/litre 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Textured rollers None Fresh water 40 micron 100 micron 4 hours (20°C) None Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S SILK TEXTURE 58540 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. HEMPEL'S FILLER 36610 or HEMPEL'S ACRYLIC FILLER 38900 Transparent: Opaque: HEMPEL'S BINDER/SEALER 09810 HEMPEL'S ACRYLIC PRIMER/SEALER 26630

FILLING: SEALING: REMARKS:

Note: ISSUED BY:

Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Other sealer/filler types may be specified. HEMPEL'S SILK TEXTURE 58540 is for professional use only. HEMPEL A/S - 5854010000CS003

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S INTERIOR EMULSION 58610

Description: Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: HEMPEL'S INTERIOR EMULSION 58610 is an economic, water-borne, decorative coating, which has a flat and smooth finish. Interior: Walls, ceilings, partitions. Concrete, masonry, woodwork. White/10000 or according to HEMPEL'S colour card Flat 42 ± 1 14.0 m²/litre - 30 micron* > 93°C 1.6 kg/litre 1 hour (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller Fresh water (20%) Fresh water 30 micron 75 micron 4 hours (10°C) None

Conventional spray Fresh water (10%)

Airless spray Fresh water (5%)

2 hours (20°C) None

1 hour (40°C) None

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S INTERIOR EMULSION 58610 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. HEMPEL'S INTERIOR FILLER 38820. Transparent: Opaque: HEMPEL'S BINDER/SEALER 09810 HEMPEL'S PRIMER/SEALER 28830

FILLING: SEALING: REMARKS:

Note: ISSUED BY:

Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Other sealer/filler types may be specified. HEMPEL'S INTERIOR EMULSION 58610 is for professional use only. HEMPEL A/S - 5861010000CS006

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S GLOSS EMULSION 58650

Description: HEMPEL'S GLOSS EMULSION 58650 is a water-borne, high-grade acrylic finishing coat. It is washable and has excellent gloss and colour retention. Ideally suited in a humid climate, has excellent water-repellence, and will permit water vapour from the substrate to pass through the paint film. Interior and exterior: Walls, ceilings, partitions. Concrete, masonry, woodwork, cement rendering, asbestos, etc. White/10000 or according to HEMPEL's colour card Glossy 32 ± 1 9.1 m²/litre - 35 micron* > 93°C 1.2 kg/litre 1 hour (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller None Fresh water 35 micron 100 micron 4 hours (10°C) None

Conventional spray Fresh water (5%)

Airless spray Fresh water (5%)

2 hours (20°C) None

1 hour (40°C) None

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S GLOSS EMULSION 58650 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. Interior: Exterior: Transparent: Opaque: HEMPEL'S INTERIOR FILLER 38820 HEMPEL'S FILLER 36610 or HEMPEL'S ACRYLIC FILLER 38900 HEMPEL'S BINDER/SEALER 09810 HEMPEL'S ACRYLIC PRIMER/SEALER 26630

FILLING:

SEALING: REMARKS:

Note: ISSUED BY:

Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Other sealer/filler types may be specified. To obtain full hiding power when changing colour, it is recommended to apply HEMPEL'S FLAT EMULSION 58710 as an undercoat in the desired colour. HEMPEL'S GLOSS EMULSION 58650 is for professional use only. HEMPEL A/S - 5865010000CS003

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S RUSTIK-2 58660

Description: HEMPEL'S RUSTIK-2 58660 is an acrylic water-borne coating, which contains marble stones. Has an old rustic and textured finish. The final appearance is determined by the application method. Different patterns can be obtained by combining different application tools. Overcoating with solvent-borne or water-borne coatings is recommended to obtain the desired finish. Interior and exterior: Walls, ceilings, partitions, etc. Concrete, masonry, cement rendering, gypsum boards, asbestos, etc. Off-white/11630 Flat 75 ± 1 0.4 m²/litre - 2 mm* None 2.0 kg/litre 5 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Recoat interval, min: Recoat interval, max: Safety:

Trowel: Stainless steel trowel. Plastic trowel to obtain desired pattern (on very smooth surfaces, apply one coat of HEMPEL'S FINE TEXTURE 58850 before application of HEMPEL'S RUSTIK-2 58660) None Fresh water 4 days (20°C) 2 days (40°C) None None Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S RUSTIK-2 58660 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. HEMPEL'S FILLER 36610 or HEMPEL'S ACRYLIC FILLER 38900 Transparent: Opaque: HEMPEL'S BINDER/SEALER 09810 HEMPEL'S ACRYLIC PRIMER/SEALER 26630

FILLING: SEALING: REMARKS:

Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Other sealer/filler types may be specified. HEMPEL'S RUSTIK-2 58660 is for professional use only. HEMPEL A/S - 5866011630CS002

Note: ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S RUSTIK-3 58670

Description: HEMPEL'S RUSTIK-3 58670 is an acrylic water-borne coating, which contains marble stones. Has an old rustic and textured finish. The final appearance is determined by the application method. Different patterns can be obtained by combining different application tools. Overcoating with solvent-borne or water-borne coatings is recommended to obtain desired finish. Interior and exterior: Walls, ceilings, partitions, etc. Concrete, masonry, cement rendering, gypsum boards, asbestos, etc. Off-white/11630 Flat 75 ± 1 0.25 m²/litre - 3 mm* None 2.0 kg/litre 5 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Recoat interval, min: Recoat interval, max: Safety:

Trowel: Stainless steel trowel. Plastic trowel to obtain desired pattern (on very smooth surfaces apply one coat of HEMPEL'S FINE TEXTURE 58850 before application of HEMPEL'S RUSTIK-3 58670) None Fresh water 4 days (20°C) 2 days (40°C) None None Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S RUSTIK-3 58670 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. HEMPEL'S FILLER 36610 or HEMPEL'S ACRYLIC FILLER 38900 Transparent: Opaque: HEMPEL'S BINDER/SEALER 09810 HEMPEL'S ACRYLIC PRIMER/SEALER 26630

FILLING: SEALING: REMARKS:

Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Other sealer/filler types may be specified. HEMPEL'S RUSTIK-3 58670 is for professional use only. HEMPEL A/S - 5867011630CS004

Note: ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S RUSTIK-5 58680

Description: HEMPEL'S RUSTIK-5 58680 is a vinyl-based, water-borne coating, which contains marble stones. Has an old rustic and textured finish. The final appearance is determined by the application method. Different patterns can be obtained by combining different application tools. Overcoating with solvent-borne or water-borne coatings is recommended to obtain desired finish. Interior and exterior: Walls, ceilings, partitions, etc. Concrete, masonry, cement rendering, gypsum boards, asbestos, etc. Off-white/11630 Flat 75 ± 1 0.15 m²/litre - 5 mm* None 2.0 kg/litre 5 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Recoat interval, min: Recoat interval, max: Safety:

Trowel: Stainless steel trowel. Plastic trowel to obtain desired pattern (on very smooth surfaces, apply one coat of HEMPEL'S FINE TEXTURE 58850 before application of HEMPEL'S RUSTIK-5 58680). None Fresh water 4 days (20°C) 2 days (40°C) None None Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S RUSTIK-5 58680 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. HEMPEL'S FILLER 36610 or HEMPEL'S ACRYLIC FILLER 38900 Transparent: Opaque: HEMPEL'S BINDER/SEALER 09810 HEMPEL'S ACRYLIC PRIMER/SEALER 26630

FILLING: SEALING: REMARKS:

Note: ISSUED BY:

Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Other sealer/filler types may be specified. HEMPEL'S RUSTIK-5 58680 is for professional use only. HEMPEL A/S - 5868011630CS004

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S FLAT EMULSION 58710

Description: HEMPEL'S FLAT EMULSION 58710 is a water-borne, acrylic-based quality coating. It complies with SASO's Standard for exterior emulsion paints (470-1986) and Federal Standard (TT-P-29). Interior and exterior: Walls, ceilings, partitions, etc. Concrete, masonry, cement rendering, gypsum boards, etc. White/10000 or according to HEMPEL's colour card Flat 42 ± 1 14.0 m²/litre - 30 micron* > 93°C 1.5 kg/litre 2 hours (10°C) 1 hour (20°C) 30 minutes (40°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller Conventional spray Airless Fresh water (15%) Fresh water (15%) Fresh water 30 micron 75 micron 4 hours (10°C) 2 hours (20°C) None None

spray Fresh water (5%)

1 hour (40°C) None

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S FLAT EMULSION 58710 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. Interior: Exterior: Transparent: Opaque: HEMPEL'S INTERIOR FILLER 38820 HEMPEL'S EXTERIOR FILLER 38830 or HEMPEL'S ACRYLIC FILLER 38900 HEMPEL'S BINDER/SEALER 09810 HEMPEL'S PRIMER/SEALER 28830

FILLING:

SEALING: REMARKS: Note: ISSUED BY:

Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. HEMPEL'S FLAT EMULSION 58710 is for professional use only. HEMPEL A/S - 5871010000CS007

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S ACRYLIC EMULSION 58720

Description: HEMPEL'S ACRYLIC EMULSION 58720 is a superior quality coating based on waterborne acrylic copolymer binder. It is a washable coating and complies with Federal Standard TT-P-19C. When applied by roller, HEMPEL'S ACRYLIC EMULSION 58720 has non-drip properties. Interior and exterior: Walls, ceilings, partitions, etc. Concrete, masonry, cement rendering, gypsum boards, etc. White/10000 or according to HEMPEL's colour card Semi-flat 35 ± 1 11.7 m²/litre - 30 micron* > 93°C 1.3 kg/litre 3 hours (10°C) 1 hour (20°C) 30 minutes (40°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller Conventional spray Airless Fresh water (15%) Fresh water (15%) Fresh water 30 micron 75 micron 6 hours (10°C) 2 hours (20°C) None None

spray Fresh water (5%)

1 hour (40°C) None

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S ACRYLIC EMULSION 58720 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. Interior: Exterior: HEMPEL'S INTERIOR FILLER 38820 HEMPEL'S EXTERIOR FILLER 38830 or HEMPEL'S ACRYLIC FILLER 38900

FILLING:

SEALING: REMARKS:

HEMPEL'S ACRYLIC PRIMER/SEALER 26630 HEMPEL'S PRIMER/SEALER 28830 Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Other sealer/filler types may be specified. Drying data given is on the assumption that proper ventilation is provided. HEMPEL'S ACRYLIC EMULSION 58720 is for professional use only. HEMPEL A/S - 5872010000CS002

Note: ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S SUPER FINE TEXTURE 58770

Description: Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: HEMPEL'S SUPER FINE TEXTURE 58770 is a water-borne paint, which gives a very fine grain-textured finish for decorative and protective effect on facades and exterior walls. Interior and exterior: Walls. Concrete, asbestos-cement, cement rendering, and other building materials. White/10000 Flat 42 ± 1 4.2 m²/litre - 100 micron* > 93°C 1.5 kg/litre 6 hours (10°C) 3 hours (20°C)

1½ hours (40°C)

*The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller Conventional spray Airless spray Fresh water (15%) Fresh water (15%) Fresh water (5%) Fresh water 100 micron 250 micron 12 hours (10°C) 6 hours (20°C) 3 hours (40°C) None None None Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S SUPER FINE TEXTURE 58770 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. Interior: Exterior: Transparent: Opaque: HEMPEL'S ACRYLIC FILLER 38900 HEMPEL'S FILLER 36610 or HEMPEL'S ACRYLIC FILLER 38900 HEMPEL'S BINDER/SEALER 09810 HEMPEL'S ACRYLIC PRIMER/SEALER 26630

FILLING: SEALING: REMARKS:

Note: ISSUED BY:

Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Drying data given is on the assumption that sufficient ventilation is provided. Other sealer/filler types may be specified. HEMPEL'S SUPER FINE TEXTURE 58770 is for professional use only. HEMPEL A/S - 5877010000CS003

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S ROOF COATING 58810

Description: HEMPEL'S ROOF COATING 58810 is a high-build acrylic coating. It forms a durable elastomeric membrane with excellent flexibility and water-proofing properties. The appearance is slightly textured. Exterior: Roofs. Concrete, masonry, woodwork, tiles, steel, PU foam, etc. White/10000 Semi-flat 54 ± 1 1.1 m²/litre - 500 micron* > 93°C 1.2 kg/litre 6 hours (10°C) 3 hours (20°C)

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

1 hour (40°C)

*The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller None Fresh water 500 micron 850 micron 6-12 hours (10°C) None

Conventional spray None

Airless spray None

3-6 hours (20°C) None

1-3 hours (40°C) None

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S ROOF COATING 58810 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. Mix 2-3 parts of sand to 1 part of HEMPEL'S ROOF COATING 58810 to fill small cracks in the concrete. On concrete: On ferrous metal: On wood: HEMPEL'S ACRYLIC PRIMER/SEALER 26630 HEMPALIN PRIMER 12050 HEMPEL'S ALKYD UNDERCOAT 22460

FILLING: SEALING:

REMARKS:

Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. HEMPEL'S ROOF COATING 58810 is for professional use only. HEMPEL A/S - 5881010000CS010

Note: ISSUED BY

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S MULTI TEXTURE 58840

Description: HEMPEL'S MULTI TEXTURE 58840 is a high-build, water-borne acrylic coating. The product has non-drip properties and different patterns can be obtained by combining different application tools. Interior and exterior: Walls, ceilings, partitions, etc. Concrete, masonry, cement rendering, asbestos, etc. White/10000 or according to HEMPEL'S colour card Flat 52 ± 1 2.1 m²/litre - 250 micron* > 93°C 1.5 kg/litre 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colour/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller None Fresh water 250 micron 475 micron 8 hours (10°C) None

Conventional spray None

Air-mix spray/Airless spray None

4 hours (20°C) None

2 hours (40°C) None

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S MULTI TEXTURE 58840 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. HEMPEL'S FILLER 36610 or HEMPEL'S ACRYLIC FILLER 38900 Transparent: Opaque: HEMPEL'S BINDER/SEALER 09810 HEMPEL'S ACRYLIC PRIMER/SEALER 26630

FILLING: SEALING: REMARKS:

Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Other sealer/filler types may be specified. HEMPEL'S MULTI TEXTURE 58840 is for professional use only. HEMPEL A/S - 5884010000CS10

Note: ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained under controlledrecommendations given in this data Their accuracy, completeness or or Data, specifications, directions and or specially defined circumstances. sheet represent only test results appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF exclusively by the Buyer and/or User. SALES, DELIVERY AND SERVICE, technical assistance is given subject writing. The Manufacturer and SellerOF The Products are supplied and all unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S FINE TEXTURE 58850

Description: Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: HEMPEL'S FINE TEXTURE 58850 is a water-borne acrylic-based coating. Has a fine granular texture. Different patterns can be obtained by using various application tools. Interior and exterior: Walls, ceilings, partitions. Concrete, masonry, cement rendering, asbestos, etc. White/10000 or according to HEMPEL'S colour card Flat 60 ± 1 4.0 m²/litre - 150 micron* > 93°C 1.7 kg/litre 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller None Fresh water 150 micron 250 micron 8 hours (10°C) None

Conventional spray None

Air-mix spray None

4 hours (20°C) None

2 hours (40°C) None

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S FINE TEXTURE 58850 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. HEMPEL'S FILLER 36610 or HEMPEL'S ACRYLIC FILLER 38900 Transparent: Opaque: HEMPEL'S BINDER/SEALER 09810 HEMPEL'S ACRYLIC PRIMER/SEALER 26630

FILLING: SEALING: REMARKS:

Note: ISSUED BY

Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Other sealer/filler types may be specified. When top coating with semi-gloss to high-gloss finishes, spray application is recommended to obtain the best possible aesthetic appearance to an even overall effect. HEMPEL'S FINE TEXTURE 58850 is for professional use only. HEMPEL A/S - 5885010000CS006

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S MEDIUM TEXTURE 58860

Description: HEMPEL'S MEDIUM TEXTURE 58860 is a water-borne acrylic-based coating. Has a medium granular texture. Different patterns can be obtained by using various application tools. Interior and exterior: Walls, ceilings, partitions. Concrete, masonry, cement rendering, asbestos, etc. White/10000 or according to HEMPEL'S colour card Flat 61 ± 1 3.1 m²/litre - 200 micron* None 1.8 kg/litre 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller None Fresh water 200 micron 325 micron 8 hours (10°C) None

Conventional spray None

Air-mix spray None

4 hours (20°C) None

2 hours (40°C) None

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S MEDIUM TEXTURE 58860 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. Filling is normally not required. Transparent: Opaque: HEMPEL'S BINDER/SEALER 09810 HEMPEL'S ACRYLIC PRIMER/SEALER 26630

FILLING: SEALING: REMARKS:

Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Other sealer types may be specified. When top coating with semi-gloss to high-gloss finishes, spray application is recommended to obtain the best possible aesthetic appearance to an even overall effect. HEMPEL'S MEDIUM TEXTURE 58860 is for professional use only. HEMPEL A/S - 5886010000CS007

Note: ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S COARSE TEXTURE 58870

Description: HEMPEL'S COARSE TEXTURE 58870 is a water-borne acrylic-based coating. Has a coarse granular texture. Different patterns can be obtained by using various application tools. Interior and exterior: Walls, ceilings partitions. Concrete, masonry, cement rendering, asbestos, etc. White/10000 or according to HEMPEL'S colour card Flat 56 ± 1 > 93°C 1.9 m/litre - 300 micron* 1.7 kg/litre 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Flash point: Theoretical spreading rate: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller None Fresh water 300 micron 525 micron 8 hours (10°C) None

Conventional spray None

Air-mix spray None

4 hours (20°C) None

2 hours (40°C) None

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S EMULSION 58870 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. Filling is normally not required. Transparent: Opaque: HEMPEL'S BINDER/SEALER 09810 HEMPEL'S ACRYLIC PRIMER/SEALER 26630

FILLING: SEALING: REMARKS:

Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Other sealer types may be specified. When top coating with semi-gloss to high-gloss finishes, spray application is recommended to obtain the best possible aesthetic appearance to an even overall effect. HEMPEL'S EMULSION 58870 is for professional use only. HEMPEL A/S - 5887010000CS005

Note: ISSUED BY:

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Product Data

HEMPEL'S ACRYLIC EMULSION 58910

Description: HEMPEL'S ACRYLIC EMULSION 58910 is a water-borne, high-grade acrylic finishing coat providing a flat finish. It is washable and has low dirt pick-up properties. It contains fungicides to prevent growth of fungus and mould. The product has excellent resistance to rain and sunlight and excellent colour stability. Interior and exterior: Walls, ceilings, partitions, etc. Concrete, cement rendering, masonry, gypsum boards and wood. White/10000 or according to HEMPEL'S colour card Flat 41 ± 1 13.7 m²/litre - 30 micron* > 93°C 1.5 kg/litre 2 hours (10°) 1 hour (20°C) 30 minutes (40°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:

APPLICATION DETAILS: Application method: Thinner (max. vol): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety:

Brush/roller Fresh water (20%) Fresh water 30 micron 75 micron 4 hours (10°C) None

Conventional spray Fresh water (10%)

Airless spray Fresh water (5%)

2 hours (20°C) None

1 hour (40°C) None

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Issued: October 2006

Page 1 of 2

HEMPEL Product Data Sheet

HEMPEL'S ACRYLIC EMULSION 58910 SURFACE CONDITION: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. Interior: Exterior: Transparent: Opaque: HEMPEL'S INTERIOR FILLER 38820 HEMPEL'S FILLER 36610 or HEMPEL'S ACRYLIC FILLER 38900 HEMPEL'S BINDER/SEALER 09810 HEMPEL'S ACRYLIC PRIMER/SEALER 26630

FILLING: SEALING: REMARKS: Note: ISSUED BY

Use only where application and drying can proceed at temperatures above 5°C, preferably above 10°C and relative humidity 85%. Drying data given is on the assumption that proper ventilation is provided. HEMPEL'S ACRYLIC EMULSION 58910 is for professional use only. HEMPEL A/S - 5891010000CS005

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, seepreviously issued. This Product Data Sheet supersedes those "Explanatory Notes" in the HEMPEL Book. Data, specifications, directions and recommendations givenNotes" in thesheet represent only test results or For explanations, definitions and scope, see "Explanatory in this data HEMPEL Book. experience obtained directions and or specially defined circumstances. sheet represent only test results Data, specifications,under controlledrecommendations given in this data Their accuracy, completeness or or appropriateness under the actual conditions of any defined circumstances. Their herein must be determined experience obtained under controlled or specially intended use of the Products accuracy, completeness or exclusively by the Buyer and/or User. appropriateness under the actual conditions of any intended use of the Products herein must be determined The Products the Buyer and/or User. exclusively byare supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in to HEMPEL's GENERAL CONDITIONS The Products are supplied and all technical assistance is given subject writing. The Manufacturer and SellerOF disclaim, and Buyer and/or User waive all claims involving, any liability,writing. The Manufacturerto negligence, SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in including but not limited and Seller except as expressed in said GENERAL all claims involving, any liability, or direct but not limited losses or disclaim, and Buyer and/or User waiveCONDITIONS for all results, injury including or consequentialto negligence, damages expressed the use of the Products as recommended above, on the overleaf or otherwise. except asarising from in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising subject to change without noticerecommended above, on the from the date of issue. Product data are from the use of the Products as and become void five years overleaf or otherwise.

Issued: October 2006

Page 2 of 2

Product Data Sheet

Information

Forside

99 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

25232


You might also be interested in

BETA
Forside