Read Duxford_GermanischerLloyd.pdf text version

Statement

Approval No. GL·LZ 2011 HH

In recognition of a successful inspection carried out by Germanischer Lloyd

Hexcel - Qualification laboratory

Ickleton Road Duxford, Cambridgeshire$ CB22 4QD United Kingdom

is approved as laboratory for technical competence in the field of

Mechanical and Analytical Testing

The certification covers the specific tests and types of tests listed in the annex. This laboratory meets

the requirements of the rules of Germanischer Lloyd for Non-metallic Materials.

A laboratory inspection was carried out from 2011-03-08 - 2011-03-09. All facilities and the qualification

of the personnel in charge of the above mentioned company was found in good order.

This statement consists of this page and athree-page annex which are integral part of the approval.

This statement is valid until 2014-04-30

Hamburg, 2011-04-29

Germanischer Lloyd

:/:7~

Marcus von Busch

i.J.

Guido Michalek

ANNEX

to the statement for approval no. GL·LZ 2011 HH Scope of certified tests and types of tests Test Mechanical and Technological

Plastics - Determination of flexural properties Plastics - Determination of tensile Pfoperties Part 1: General principles Plastics - Determination of tensile properties Part 4: Test conditions for isotropic and anisotropic fibrereinforced plastic composites Plastics - Determination of tensile properties Part 5: Test conditions for unidirectional fibre-reinforced plastic composites Fibre-reinforced plastics Determination of fatigue properties under cyclic loading conditions Fibre-reinforced plastic composites Determination of flexural properties Fibre-reinforced plastic composites Determination of compressive properties in the in-plane direction Fibre-reinforced plastic composites Determination of the in-plane shear stress/shear strain reponse. including the in-plane schear modulus and strength, by ± 45" tension test method Fibre reinforced plastic composites Determination of apparent interlaminar shear strength by short beam-method Specification for glass fibre reinforced plastics Test method - Determination of apparent interlaminar shear strength Carbon fibre reinforced plastics Undirectionallaminates - Tensile test parallel to the fibre direction Carbon fibre reinforced plastics Unidirectional laminates - Flexural lest parallel to the fibre direction Carbon fibre reinforced plastics Unidirectional laminates - Determination of the apparent interlaminar shear strength Carbon fibre reinforced plastics Unidirectionallarninates Tensile test perpendicular to the fibre direction Glass fibre reinforced plastics Flexural test - Three point bend method Carbon fibre thermosetting resin unidirectional laminates Compression lest parallel to fibre direction ISO 178 ISO 527-1

Test Method

ISO 527-4

_.

ISO 527-5

ISO 13003

--

ISO 14125 ISO 14126

ISO 1412$

ISO 14130

BSEN 2377

as EN 2561

-

-

BS EN 2562

BS EN 2563

-

BS EN 2597

BS EN 2746 DIN EN 2850

-

page 1/3

ANNEX

to the statement for approval no. GL·LZ 2011 HH

Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method

ASTM 030391 03039M - 08 ASTM 034101 03410M - 03(2008)

I ASTM 034791 03479M - 96(2007}

ASTM 035181 03518M - 94(2007}

I

I

I

I

I ASTM 053791 05379M - 05

ASTM 06641 106641 M- 09 ASTM 070781 D7078M - 05

I

I

:

r

Analytical

Textile-glass-reinforced plastics Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content; calcina~on methods Plastics - Melhods for determining the density of non-cellular plastics Immersion method, liquid pyknometer method and titration method Reinforcement products - Mats and fabrics Determination of mass per unit area

Plastics - Differential scanning calorimetry (DSC)

Part 2: Determination of glass transition temperature Composites - Prepregs - Determination of resin flow Textile glass fibre preimpregnates Test method for the determination of mass per unit area Textile glass libre preimpregnales Test method for the determination of the content of volatile mailer Textile glass fibre preimpregnates Test method for the determination of the resin and fibre content and mass of fibre per unit area Carbon fibre preimpregnates Determination of mass per unit area Carbon fibre preimpregnates Determination of the volatile content Carbon fibre preimpregnates Determination of the resin and fibre content and the mass of fibre per unil area

,

ISO 1172

I

ISO 1183-1

1 ISO 3374

I

ISO 11357-2

I ISO 15034

BS EN 2329 BSEN 2330

as EN 2331

B$ EN 2557

as EN 2558

-

as EN 2559

page 2/3

ANNEX

to the statement for approval no. GL·LZ 2011 HH

Calbon fibre preimpregnates Determination of the resin flow Calbon fibre laminates Determination of the fibre, resin and void contents Textiles Fabrics Determination of mass per unit area using small samples Standard Test Methods for Density and Specific Gravity (Relative Density} of Plastics by Displacement Standard Test Methods for Constituent Content of Composite Malerials Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Cryslallization of Polymers by Differential scanning Calorimelry Standard Test Method for Volatiles Content of Composite Material Prepreg Standard Test Method for Glass Transition Temperature (DMA T9) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)

8S EN 2560 BS EN 2564 BS EN 12127 ASTM D 792 08 ASTM 0 3171 - 09 ASTM 3418 08 ASOTM 03530 I D3530M 97(2008) ASTM 07028 07e1 ASTM E1640

I Standard Test Method for Assignment of Ihe Glass Transition

Temperature 8y Dynamic Mechanical Analysis

The following personnel are authorised to approve test reports:

Daniel Ng

End of Appendix

Saba Ahmad

Germanischer

L10Y~

~

page 3/3

Information

4 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

202305


You might also be interested in

BETA
List of Independent labs with qualified tests - sorted by name
MCHW VOLUME 1 -SPECIFICATION FOR HIGHWAY WORKS - APPENDIX F - PUBLICATIONS REFERRED TO IN THE SPECIFICATION
Microsoft Word - Modibbo et al pdf.doc
SAV 4022 Layout
britStand.set