Read isoupdate_february2012.pdf text version

ISO Update

Supplement to ISO F + ocus

February 2012

People and places

ISO Members

2

International Standards in process

from 1 to 31 January 2012

Committee Drafts (CD) registered Draft International Standards (DIS) circulated Final draft International Standards (FDIS) circulated Standards published Standards confirmed Standards withdrawn Meeting calendar

3 5 9 11 14 15 16

People and places

ISO Members

Since the January 2012 issue of ISO Update Supplement to ISO Focus+, the following changes affecting ISO members have occurred:

Membership changes Correspondent members

The membership status of the Bureau burundais de Normalisation et Contrôle de la Qualité (BBN) has been upgraded from subscriber member to correspondent member with retroactive effect as from 1 January 2012. Their contact details read as follows: BURUNDI (BBN) Bureau burundais de Normalisation et Contrôle de la Qualité 500 Boulevard de la Tanzanie BUJUMBURA Postal address B.P. 3535 BUJUMBURA Directeur: M. Damien Nakobedetse Tel. Fax E-mail +257 22 22 18 15 +257 22 22 55 95 [email protected]

New CEOs : Member body

LIBYA (LNCSM) Director General: Dr. Khaled Kreddan

Correspondent members

LESOTHO (LSQAS) Principal Secretary: Mr. Hompho Mpeta NEPAL (NBSM) Acting Director General: Ms. Romi Manandhar

The status of ISO correspondent member for El Salvador has been transferred to the Organismo Salvadoreño de Normalización (OSN). Their contact details read as follows: EL SALVADOR (OSN) Organismo Salvadoreño de Normalización (OSN) 1° Calle Poniente y final 41 av. Norte, #18. Col Flor Blanca SAN SALVADOR Director: Mrs. Yanira Colindres Tel. Fax E-mail +503 22 47 53 12 +503 22 25 62 55 [email protected]

2

ISO Update, Supplement to ISO Focus+­ February 2012

International Standards in process

TC 30

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. ISO/CD 10790

Measurement of fluid flow in closed conduits

Measurement of fluid flow in closed conduits -- Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)

TC 34

ISO/CD 2451 ISO/CD 22002-2

Food products

Cocoa beans -- Specification Prerequisite programmes on food safety -- Part 2: Catering

TC 46

ISO/CD 2789

Information and documentation

Information and documentation -- International library statistics

TC 59

Buildings and civil engineering works

Building and civil engineering -- Vocabulary -- Part 1: General terms

CD registered

Period from 01 January to 31 January 2012 These documents are currently under consideration in the technical committee. They have been registred at the Central Secretariat.

ISO/CD 6707-1

TC 85

ISO/CD 11665-10

Nuclear energy, nuclear technologies, and radiological protection

Measurement of radioactivity in the environment -- Air: radon-222 -- Part 10: Determination of diffusion coefficient in waterproof materials using activity concentration measurement

TC 92

ISO/CD 3814

Fire safety

Tests for measuring "reaction-to-fire" of building materials -- Their development and application Measurement of toxic gas production using FTIR technique for room corner test and open calorimetry Fire resistance tests -- Elements of building construction -- Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural elements Fire-resistance tests -- Part 2: Lift landing door assemblies Fire resistance tests -- Guidelines for computational structural fire design Fire Safety Engineering - Guidance for use of zone fire models Fire safety engineering -- Assessment, verification and validation of calculation methods -- Part 2: Example of a Fire zone model

TC 8

ISO/CD 28005-1 ISO/CD PAS 28005-1 ISO/CD 16707

Ships and marine technology

Security management systems for the supply chain -- Electr onic port clearance (EPC) -- Part 1: Message structures Security management systems for the supply chain -- Electr onic port clearance (EPC) -- Part 1: Message structures Ships and marine technology -- Marine evacuation systems -- Determination of capacity of Marine Evacuation Systems (MES) Ships and marine technology - Large Yachts Auxiliary diesel engines - Safety requirements

ISO/CD 16405

ISO/CD 834-10

ISO/CD 14885

ISO/CD 3008-2 ISO/DTR 15657 ISO/DTS 13447 ISO/CD 16730-2

TC 10

ISO/CD 10628-1

Technical product documentation

Diagrams for the chemical and petrochemical industry -- Part 1: Specification of diagrams

TC 17

ISO/CD 7778 ISO/CD 3573 ISO/CD 3574 ISO/CD 5002

Steel

Through-thickness characteristics for steel products Hot-rolled carbon steel sheet of commercial and drawing qualities Cold-reduced carbon steel sheet of commercial and drawing qualities Hot-rolled and cold-reduced electrolytic zinccoated carbon steel sheet of commercial and drawing qualities Hot-rolled steel sheet of higher yield strength with improved formability Hot-rolled steel strip of structural quality Hot-rolled carbon steel sheet as defined by chemical composition

TC 96

ISO/DTS 15696

Cranes

Cranes -- List of equivalent terms

TC 112

ISO/CD 2861-1

Vacuum technology

Vacuum technology -- Quick-release couplings -- Dimensions -- Part 1: Clamped type

ISO/CD 5951 ISO/CD 6316 ISO/CD 10384

TC 121

ISO/CD 5359

Anaesthetic and respiratory equipment

Low-pressure hose assemblies for use with medical gases

TC 138

ISO/CD 11297-1 ISO/CD 11297-3

Plastics pipes, fittings and valves for the transport of fluids

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 1: General Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 3: Lining with close-fit pipes

TC 20

ISO/CD 14186

Aircraft and space vehicles

Air cargo - Fire containment covers - Performance and testing requirements

TC 22

ISO/CD 16552

Road vehicles

Heavy commercial vehicles and buses -- Stopping distance in straight-line braking with ABS -- Open loop and closed loop test methods

ISO Update, Supplement to ISO Focus -- February 2012

3

TC 149

ISO/CD 6742-1 ISO/CD 6742-2

Cycles

Cycles -- Lighting and retro-reflective devices -- -- Part 1: Lighting and signalling devices Cycles -- Lighting and retro-reflective devices -- -- Part 2: Retro-reflective devices

TC 238

ISO/CD 17225-1 ISO/CD 17225-2 ISO/CD 17225-3 ISO/CD 17225-4 ISO/CD 17225-5 ISO/CD 17225-6 ISO/CD 17225-7

Solid biofuels

Solid biofuels -- Fuel specifications and classes -- Part 1: General requirements Solid biofuels -- Fuel specifications and classes -- Part 2: Graded wood pellets Solid biofuels -- Fuel specifications and classes -- Part 3: Graded wood briquettes Solid biofuels -- Fuel specifications and classes -- Part 4: Graded wood chips Solid biofuels -- Fuel specifications and classes -- Part 5: Graded firewood Solid biofuels -- Fuel specifications and classes -- Part 6: Graded non-woody pellets Solid biofuels -- Fuel specifications and classes -- Part 7: Graded non-woody briquettes

TC 150

ISO/CD 14243-4

Implants for surgery

Implants for surgery -- Wear of total knee prostheses -- Part 4: Wear of the patella-femoral joint -- Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test

TC 163

ISO/CD 6781-3

Thermal performance and energy use in the built environment

Performance of buildings -- Detection of heat, air and moisture irregularities in buildings by infrared methods -- Part 3: Qualifications of Equipment Operators, Data Analysts and Report Writers

TC 247

ISO/CD 16125

Fraud countermeasures and controls

Fraud Countermeasures and Controls- Security management system- Requirements

TC 165

ISO/CD 10983

Timber structures

Timber structures -- Solid timber finger-jointing -- Production requirements

CASCO

ISO/IEC DTS 17021-2

Committee on conformity assessment

Conformity assessment -- Requirements for third party certification auditing of environmental management systems -- Part 2: Competence requirements

TC 181

ISO 81241:2009/CD Amd 6 ISO/CD 8124-2 ISO 81244:2010/CD Amd 2 ISO/CD 8124-6

Safety of toys

Safety of toys -- Part 1: Safety aspects related to mechanical and physical properties -- Amendment 6: Cords Safety of toys -- Part 2: Flammability Safety of toys -- Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use -- Amendment 2: Paddling pools Safety of toys -- Part 6: Toys and children's products -- Determination of phthalate plasticizers in polyvinyl chloride plastics

JTC 1

ISO/IEC PDTR 29181-3

Information technology

Telecommunications and Information Exchange Between Systems -- Future Networks: Problem Statement and Requirements -- Part 3: Switching and Routing Information Technology -- Software Engineering Environment Services Information technology -- Software asset management -- Part 5: Overview and vocabulary Information technology -- Process assessment -- Process assessment model for software testing Identification cards -- Optical memory cards -- Linear recording method -- Part 4: Logical data structures Identification cards -- Optical memory cards -- Linear recording method -- Part 5: Data format for information interchange for applications using ISO/IEC 11694-4, Annex B Identification cards -- Optical memory cards -- Linear recording method -- Part 6: Use of biometrics on an optical memory card Interconnection of Information Technology Equipement -- WiBEEM Standard for Wireless Home Network Services -- Part 1: Information technology - WiBEEM Standard for Wireless Home Network Services -- Part 2: Information technology - WiBEEM Standard for Wireless Home Network Services -- Part 3: Information technology -- Security techniques -- Network security -- Part 4: Securing communications between networks using security gateways Cartridge Characterization Standard -- Part 1: General : terms, symbols and notations Cartridge Characterization Standard -- Part 2: Labeling Information technology -- Multimedia framework (MPEG-21) -- Part 3: Digital Item Identification -- Amendment 2: Digital item semantic relationships

ISO/IEC CD 15940 ISO/IEC CD 19770-5 ISO/IEC CD 33063 ISO/IEC CD 11694-4 ISO/IEC CD 11694-5

TC 190

ISO/CD 11074 ISO/CD 14388-1

Soil quality

Soil quality -- Vocabulary Soil quality - Acid-base accounting procedure for acid sulfate soils -- Part 1: Introduction and definitions, symbols and acronyms, sampling and sample preparation Soil quality - Acid-base accounting procedure for acid sulfate soils -- Part 2: Chromium reducible sulfur (CRS) methodology Soil quality - Acid-base accounting procedure for acid sulfate soils -- Part 3: Suspension peroxide oxidation combined acidity and sulfur (SPOCAS) methodology

ISO/CD 14388-2 ISO/CD 14388-3

ISO/IEC CD 11694-6 ISO/IEC CD 29145-1 ISO/IEC CD 29145-2 ISO/IEC CD 29145-3 ISO/IEC CD 27033-4

TC 197

ISO/CD 15399

Hydrogen technologies

Gaseous hydrogen - Cylinders and tubes for stationary storage

TC 204

ISO/CD 15638-7

Intelligent transport systems

Intelligent transport systems -- Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) -- Part 7: Other applications Intelligent transport systems -- Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) -- Part 7: Other applications

ISO/CD TS 15638-7

ISO/IEC CD 29142-1 ISO/IEC CD 29142-2 ISO/IEC 21000-3:2003/ PDAM 2

TC 211

ISO/CD 19147

Geographic information/Geomatics

Geographic information -- Location based services -- Transfer Nodes

TC 215

ISO/DTS 14441

Health informatics

Health Informatics: Security and privacy requirements for compliance testing of EHR systems

4

ISO Update, Supplement to ISO Focus -- February 2012

DIS circulated

Period from 01 January to 31 January 2012 These documents have obtained substantial support within the appropriate ISO technical committee. They have been submitted to the ISO member bodies for voting by the date shown. * Available in English only

TC 17

ISO/DIS 14404-1

Steel

Calculation method of carbon dioxide emission intensity from iron and steel production -- Part 1: Steel plant with blast furnace Calculation method of carbon dioxide emission intensity from iron and steel production -- Part 2: Steel plant with electric arc furnace (EAF) 2012-06-25

ISO/DIS 14404-2

2012-06-25

TC 20

ISO/DIS 16049-1 *

Aircraft and space vehicles

Air cargo equipment -- Restraint straps -- Part 1: Design criteria and testing methods (Revision of ISO 16049-1:2001) 2012-06-07

Vote terminates

TC 22

ISO/DIS 18669-1 *

Road vehicles

Internal combustion engines -- Piston pins -- Part 1: General specifications (Revision of ISO 18669-1:2004) Road vehicles -- Vehicle to grid communication interface -- Part 1: General information and usecase definition Road vehicles -- FlexRay communications system -- Part 1: General information and use case definition Road vehicles -- FlexRay communications system -- Part 2: Data link layer specification Road vehicles -- FlexRay communications system -- Part 3: Data link layer conformance test specification Road vehicles -- FlexRay communications system -- Part 4: Electrical physical layer specification Road vehicles -- FlexRay communications system -- Part 5: Electrical physical layer conformance test specification Diesel engines -- Clamp-mounted fuel injectors, types 7 and 28 (Revision of ISO 2698:1993) 2012-06-07

TC 4

ISO 1206:2001/ DAmd 1 *

Rolling bearings

Rolling bearings -- Needle roller bearings, dimension series 48, 49 and 69 -- Boundary dimensions and tolerances -- Amendment 1: Tolerance limits for shaft raceway and housing bore diameters 2012-06-12

ISO/IEC DIS 15118-1

*

2012-06-20

TC 6

ISO/DIS 5636-3 *

Paper, board and pulps

Paper and board -- Determination of air permeance (medium range) -- Part 3: Bendtsen method (Revision of ISO 5636-3:1992) Paper and board -- Determination of air permeance (medium range) -- Part 4: Sheffield method (Revision of ISO 5636-4:2005) Paper and board -- Determination of air permeance (medium range) -- Part 5: Gurley method (Revision of ISO 5636-5:2003) 2012-06-06

ISO/DIS 17458-1

*

2012-06-13

ISO/DIS 17458-2 2012-06-06 ISO/DIS 17458-3

*

2012-06-13

ISO/DIS 5636-4

*

*

2012-06-13

ISO/DIS 5636-5

*

2012-06-06

ISO/DIS 17458-4

*

2012-06-13

TC 8

ISO/DIS 19292.2 *

Ships and marine technology

Ships and marine technology -- Lifesaving and fire protection -- Point-type resettable flame detectors for ships Ships and marine technology Manoeuvring of ships -- Part 1: General concepts, quantities and test conditions Ships and marine technology Manoeuvring of ships -- Part 2: Turning and yaw checking Ships and marine technology -- Manoeuvring of ships -- Part 3: Yaw stability and steering Ships and marine technology -- Manoeuvring of ships -- Part 4: Stopping, acceleration, traversing Ships and marine technology -- Installation guideline for ship communication network of improving communication for shipboard equipment and systems * Ships and marine technology -- Protective coatings and inspection method -- Part 4: Automated measuring method for the total amount of water-soluble salts 2012-03-12

ISO/DIS 17458-5

*

2012-06-13

ISO/DIS 2698

*

2012-06-25

ISO/DIS 13643-1

2012-06-26

ISO/DIS 12619-1

*

ISO/DIS 13643-2 ISO/DIS 13643-3 ISO/DIS 13643-4

2012-06-26 ISO/DIS 12619-2 *

Road vehicles - Compressed Gaseous Hydrogen (CGH2) and Hydrogen/Natural Gas blend fuel system components -- Part 1: General requirements and definitions Road vehicles -- Compressed Gaseous Hydrogen (CGH2) and Hydrogen/Natural Gas blend fuel system components -- Part 2: Performance and general test methods Road vehicles -- Compressed Gaseous Hydrogen (CGH2) and Hydrogen/Natural Gas blend fuel system components -- Part 3: Pressure regulator

2012-06-07

2012-06-26

2012-06-07

2012-06-26 ISO/DIS 12619-3 2012-07-02 *

ISO/DIS 16425

2012-06-07

TC 23

2012-06-12 ISO/DIS 5395-1.2 *

ISO/DIS 16145-4

Tractors and machinery for agriculture and forestry

Garden equipment -- Safety requirements for combustionengine-powered lawnmowers -- Part 1: Terminology and common tests 2012-03-06

ISO Update, Supplement to ISO Focus -- February 2012

5

(Revision of ISO 5395:1990, ISO 5395:1990/Amd 1:1992) ISO/DIS 5395-2.2 * Garden equipment -- Safety requirements for combustion-engine-powered lawnmowers -- Part 2: Pedestrian-controlled lawnmowers (Revision of ISO 5395:1990, ISO 5395:1990/Amd 1:1992) Garden equipment -- Safety requirements for combustion-engine-powered lawnmowers -- Part 3: Ride-on lawnmowers (Revision of ISO 5395:1990, ISO 5395:1990/Amd 1:1992) 2012-03-06

(Revision of ISO 4716:2002) ISO/DIS 4719 * Essential oil of spike lavender (Lavandula latifolia (L.f.) Medikus), Spanish type (Revision of ISO 4719:1999) 2012-06-14

TC 58

ISO/DIS 11119-3.2 2012-03-06 *

Gas cylinders

Gas cylinders of composite construction -- Specification and test methods -- Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-loadsharing metallic or non-metallic liners (Revision of ISO 11119-3:2002) Gas cylinders -- Refillable composite reinforced tubes of water capacity between 450 L and 3000 L -- Design, construction and testing 2012-03-14

ISO/DIS 5395-3.2

*

TC 28

ISO/DIS 8310 *

Petroleum products and lubricants

Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels -- General requirements for automatic tank thermometers on board marine carriers and floating storage (Revision of ISO 8310:1991) 2012-06-26

ISO/DIS 11515.2

*

2012-03-14

TC 61

ISO/DIS 75-1 *

Plastics

Plastics -- Determination of temperature of deflection under load -- Part 1: General test method (Revision of ISO 75-1:2004) Plastics -- Determination of Izod impact strength -- Amendment 2: Precision data Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST) (Revision of ISO 306:2004) Adhesives -- Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (Revision of ISO 10123:1990) Structural adhesives -- Determination of the pot life (working life) of multi-component adhesives (Revision of ISO 10364:2007) Adhesives -- Adhesives for bonding parquet to subfloor -- Test methods and minimum requirements 2012-06-13

TC 34

ISO/DIS 21572.2 *

Food products

Foodstuffs -- Molecular biomarker analysis -- Protein-based methods (Revision of ISO 21572:2004, ISO 21572:2004/Cor 1:2005) 2012-03-27

ISO 180:2000/ DAmd 2 ISO/DIS 306

*

2012-06-13

*

2012-06-13

TC 42

ISO/DIS 15781

Photography

Photography -- Digital cameras -- Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time 2012-07-02 ISO/DIS 10123 *

2012-06-11

TC 44

ISO 24394:2008/ DAmd 1 *

Welding and allied processes

Welding for aerospace applications -- Qualification test for welders and welding operators -- Fusion welding of metallic components -- Amendment 1 2012-04-05

ISO/DIS 10364

*

2012-06-11

ISO/DIS 17178

2012-06-25

TC 45

ISO/DIS 13507.2

Rubber and rubber products

Rubber compounds, raw rubbers and compounding materials -- Short terms for properties reported in certificates of analysis * Rubber, vulcanized or thermoplastic -- Determination of stress relaxation in compression -- Part 2: Testing with temperature cycling Rubber, raw -- Determination of water content by the Karl Fischer method Rubber -- Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer * Rubber, raw natural -- Determination of the gel content of technically specified rubber (TSR) Rubber and plastics gloves for food services -- Limits for extractable substances 2012-03-26

TC 67

Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries

Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 6: Subsea production control systems (Revision of ISO 13628-6:2006) 2012-06-13

ISO/DIS 3384-2.2

2012-03-13

ISO/DIS 13628-6

ISO/DIS 12492.2 ISO/DIS 13145.2

*

2012-03-13

TC 69

ISO/DIS 11843-6.2

Applications of statistical methods

Capability of detection -- Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations 2012-04-25

2012-03-25

ISO/DIS 17278

2012-06-13

TC 70

2012-07-01 ISO/DIS 4548-5 *

ISO/DIS 14285

Internal combustion engines

Full-flow lubricating oil filters for internal combustion engines -- Part 5: Method of test for cold start simulation and hydraulic pulse durability (Revision of ISO 4548-5:1990) 2012-06-12

TC 54

ISO/DIS 4716 *

Essential oils

Essential oil of vetiver [Vetiveria zizanioides (L.) Nash] 2012-06-18

6

ISO Update, Supplement to ISO Focus -- February 2012

TC 79

ISO/DIS 28340

Light metals and their alloys

Combined coatings on aluminium -- General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium 2012-06-21

TC 96

ISO/DIS 4305 *

Cranes

Mobile cranes -- Determination of stability (Revision of ISO 4305:1991) 2012-06-07

ISO/DIS 9927-1.2

*

Cranes -- Inspections -- Part 1: General

2012-03-07

TC 83

ISO/DIS 5902 *

Sports and recreational equipment

Alpine skis -- Determination of elastic properties (Revision of ISO 5902:1980) 2012-06-18

TC 106

ISO 7405:2008/ DAmd 1 *

Dentistry

Dentistry -- Evaluation of biocompatibility of medical devices used in dentistry -- Amendment 1 2012-06-20

ISO/DIS 6265

*

Alpine skis -- Determination of deformation load and breaking load (Revision of ISO 6265:1992) Alpine skis -- Determination of fatigue indexes -- Cyclic loading test (Revision of ISO 6266:1980) Alpine ski-bindings -- Requirements and test methods (Revision of ISO 9462:2006, ISO 9462:2006/Amd 1:2009)

TC 114

2012-06-14 ISO 64262:2002/DAmd 1 *

Horology

Horological vocabulary -- Part 2: Technical and commercial definitions -- Amendment 1 2012-06-07

ISO/DIS 6266

*

TC 121

2012-06-14 IEC/DIS 60601-1-12

Anaesthetic and respiratory equipment

Medical Electrical Equipment -- Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the emergency medical services environment Medical electrical equipment -- Part 2-30: Particular requirements for basic safety and essential performance of automated non-invasive sphygmomanometers -- Amendment 1 * Medical electrical equipment -- Part 2-67: Particular requirements for basic safety and essential performance of oxygenconserving equipment (Revision of ISO 18779:2005) 2012-06-16

ISO/DIS 9462

*

2012-06-07

TC 85

Nuclear energy, nuclear technologies, and radiological protection

* Measurement of radioactivity in the environment -- Soil -- Part 7: In situ measurement of gamma-emitting radionuclides Radiation protection -- Performance criteria for service laboratories performing biological dosimetry by cytogenetics (Revision of ISO 19238:2004) Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy 2012-06-21

ISO/DIS 18589-7

IEC 806012-30:2009/ DAmd 1

2012-06-30

ISO/DIS 19238

*

2012-06-07

ISO/DIS 80601-2-67

2012-06-27

ISO/DIS 28057

*

2012-06-11

TC 127

ISO/DIS 3164

Earth-moving machinery

Earth-moving machinery -- Laboratory evaluations of protective structures -- Specifications for deflection-limiting volume (Revision of ISO 3164:1995) 2012-06-13

TC 86

ISO/DIS 16358-1 *

Refrigeration and air-conditioning

Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors -- Part 1: Cooling seasonal performance factor Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors -- Part 2: Heating seasonal performance factor Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors -- Part 3: Annual performance factor 2012-06-14

TC 136

ISO/DIS 4211-2 *

Furniture

Furniture -- Tests for surface finishes -- Part 2: Assessment of resistance to wet heat (Revision of ISO 4211-2:1993) Furniture -- Tests for surface finishes -- Part 3: Assessment of resistance to dry heat (Revision of ISO 4211-3:1993) 2012-06-26

ISO/DIS 16358-2

*

2012-06-14

ISO/DIS 4211-3

*

2012-06-20

TC 146

2012-06-14 ISO/DIS 12219-4 *

Air quality

Interior air of road vehicles -- Part 4: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials -- Small chamber method 2012-07-01

ISO/DIS 16358-3

*

TC 87

ISO/DIS 16419

Cork

Cork -- Visual anomalies of cork stoppers for still wines 2012-06-28

TC 156

ISO/DIS 16539

Corrosion of metals and alloys

Corrosion of metals and alloys -- Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process --"Dry" and "wet" conditions at constant absolute humidity 2012-06-28

TC 89

ISO 18776:2008/ DAmd 1 *

Wood-based panels

Laminated veneer lumber (LVL) -- Specifications -- Amendment 1 2012-06-06

ISO Update, Supplement to ISO Focus -- February 2012

7

TC 172

ISO/DIS 11553-3.2 *

Optics and photonics

Safety of machinery -- Laser processing machines -- Part 3: Noise reduction and noise measurement methods for laser processing machines and handheld processing devices and associated auxiliary equipment (accuracy grade 2) 2012-03-13

TC 216

ISO/DIS 16187 *

Footwear

Footwear -- Test methods for uppers, lining and insocks - Antibacterial activity 2012-06-20

TC 226

ISO/DIS 12926 *

Materials for the production of primary aluminium

Aluminium fluoride for industrial use -- Determination of trace elements -- Wavelength dispersive X-ray fluorescence spectrometric method using pressed powder tablets 2012-06-14

TC 184

ISO/DIS 9787 *

Automation systems and integration

Robots and robotic devices -- Coordinate systems and motion nomenclatures (Revision of ISO 9787:1999) Automation systems and integration -- Environmental and energy efficiency evaluation method for manufacturing systems -- Part 1: Overview and general principles 2012-06-20

TMB

ISO/IEC DGuide 98-4.2 *

Technical Management Board

Uncertainty of measurement -- Part 4: Role of measurement uncertainty in conformity assessment 2012-05-26

ISO/DIS 20140-1

*

2012-06-18

IULTCS

TC 201

ISO/DIS 16413

Surface chemical analysis

Evaluation of thickness, density and interface width of thin films by X-ray reflectometry -- Instrumental requirements, alignment and positioning, data collection, data analysis and reporting 2012-06-24 ISO/DIS 11646 *

International Union of Leather Technologists and Chemists Societies

Leather -- Measurement of area 2012-06-13 (Revision of ISO 11646:1993)

ISO/DIS 17130

*

TC 204

ISO/DIS 24531 *

Intelligent transport systems

Intelligent transport systems -- System architecture, taxonomy and terminology -- Using XML in ITS standards, data registries and data dictionaries (Revision of ISO 24531:2007) Intelligent Transport Systems -- Freight land conveyance content identification and communication architecture -- Part 1: Application profile (Revision of ISO/PRF TS 26683-1) Intelligent transport systems -- Freight land conveyance content identification and communication (FLC-CIC) -- Part 2: Application interface profiles (Revision of ISO/PRF TS 26683-2) 2012-06-25

Leather - Physical and mechanical tests - Determination of dimensional change Leather -- Chemical tests -- Determination of tan content in tanning agents Leather -- Determination of surface reflectance

2012-06-13

ISO/DIS 17489

*

2012-06-13

ISO/DIS 17502

*

2012-06-13

ISO/DIS 26683-1

*

JTC 1

2012-06-26 ISO/IEC DIS 17982

Information technology

Information technology -- Telecommunications and information exchange between systems -- Close Capacitive Coupling Communication Physical Layer (CCCC PHY) Information technology -- SOA Governance Framework Information technology -- Telecommunications and information exchange between systems -- Services for Computer Supported Telecommunications Applications (CSTA) Phase III (Revision of ISO/IEC 18051:2010) Information technology -- Telecommunications and information exchange between systems -- ASN.1 for Computer Supported Telecommunications Applications (CSTA) Phase III (Revision of ISO/IEC 18052:2011) Information technology -- Telecommunications and information exchange between systems -- XML Schema Definitions for Computer Supported Telecommunications Applications (CSTA) Phase III (Revision of ISO/IEC 18056:2010) 2012-06-11

ISO/DIS 26683-2

*

2012-06-26

ISO/IEC DIS 17998 ISO/IEC DIS 18051

2012-06-06

2012-06-11

TC 205

ISO/DIS 13675 *

Building environment design

Heating and cooling systems in buildings - Method and design for calculation of the system energy performance - Combustion systems (boilers) 2012-06-24 ISO/IEC DIS 18052

2012-06-11

TC 206

ISO/DIS 14629 *

Fine ceramics

Fine ceramics (advanced ceramics, advanced technical ceramics) -- Determination of flowability of ceramic powders 2012-06-11 ISO/IEC DIS 18056

TC 207

ISO/DIS 14031 *

Environmental management

Environmental management -- Environmental performance evaluation -- Guidelines (Revision of ISO 14031:1999) Carbon footprint of products -- Requirements and guidelines for quantification and communication 2012-06-13

2012-06-11

ISO/DIS 14067

*

2012-06-07

8

ISO Update, Supplement to ISO Focus -- February 2012

ISO/IEC DIS 25437

Information technology -- Telecommunications and information exchange between systems -- WS-Session -- Web services for application session services (Revision of ISO/IEC 25437:2009) Systems and software engineering -- Systems and software assurance -- Part 4: Assurance in the life cycle Software and systems engineering -- Tools and methods for product line requirements engineering Software and systems engineering -- Tools and methods for product line technical management Information technology -- Fibre Channel -- Part 243: Backbone 3 (FC-BB-3) Information technology -- Small Computer System Interface (SCSI) -- Part 333: SCSI Stream Commands - 3 (SSC-3) Information technology -- Generic cabling systems for data centres -- Amendment 1 Information technology -- Security techniques -- Security requirements for cryptographic modules (Revision of ISO/IEC 19790:2006, ISO/IEC 19790:2006/Cor 1:2008) Information technology -- Coding of audio-visual objects -- Part 12: ISO base media file format -- Amendment 4: Various enhancements including support for large metadata Information technology -- JPEG 2000 image coding system -- Part 12: ISO base media file format -- Amendment 4: Various enhancements including support for large metadata Information technology -- Multimedia content description interface -- Part 12: Query format (Revision of ISO/IEC 1593812:2008, ISO/IEC 1593812:2008/Cor 1:2009, ISO/IEC 15938-12:2008/Cor 2:2010, ISO/ IEC 15938-12:2008/Amd 1:2011, ISO/IEC 15938-12:2008/Amd 2:2011) Information technology -- Multimedia application format (MPEG-A) -- Part 6: Professional archival application format (Revision of ISO/IEC 230006:2009, ISO/IEC 23000-6:2009/ Amd 1:2010, ISO/IEC 230006:2009/Cor 1:2010, ISO/IEC 23000-6:2009/PDAM 2) Information technology -- MPEG systems technologies -- Part 7: Common encryption in ISO base media file format files -- Amendment 1: AES-CBC-128 and key rotation

2012-06-11

FDIS circulated

Period from 01 January to 31 January 2012 These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown * Available in English only

ISO/IEC DIS 15026-4

2012-06-06

ISO/IEC DIS 26551

2012-06-28

Vote terminates

ISO/IEC DIS 26555

2012-06-28

TC 8

ISO/FDIS 14859 *

Ships and marine technology

Ships and marine technology Sound reception systems 2012-03-13

ISO/IEC DIS 14165-243 ISO/IEC DIS 14776-333

2012-06-28

TC 22

ISO/FDIS 13400-2 *

Road vehicles

Road vehicles - Diagnostic communication over Internet Protocol (DoIP) -- Part 2: Transport protocol and network layer services Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 2: Performance and general test methods (Revision of ISO 15500-2:2001) Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 3: Check valve (Revision of ISO 15500-3:2001) Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 4: Manual valve (Revision of ISO 15500-4:2001) Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 5: Manual cylinder valve (Revision of ISO 15500-5:2001) Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 6: Automatic valve (Revision of ISO 15500-6:2001) Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 9: Pressure regulator (Revision of ISO 15500-9:2001) Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 13: Pressure relief device (PRD) (Revision of ISO 15500-13:2001) Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 14: Excess flow valve (Revision of ISO 15500-14:2002) Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 16: Rigid fuel line in stainless steel (Revision of ISO 15500-16:2001) 2012-03-28

2012-07-01

ISO/IEC 24764:2010/ DAmd 1 ISO/IEC DIS 19790

2012-07-01

ISO/FDIS 15500-2

*

2012-03-14

2012-06-11 ISO/FDIS 15500-3 *

2012-03-14

ISO/IEC 1449612:2008/DAmd 4

2012-06-06

ISO/FDIS 15500-4

*

2012-03-14

ISO/IEC 1544412:2008/DAmd 4

2012-06-06

ISO/FDIS 15500-5

*

2012-03-14

ISO/IEC DIS 15938-12

ISO/FDIS 15500-6 2012-06-06

*

2012-03-14

ISO/FDIS 15500-9

*

2012-03-14

ISO/IEC DIS 23000-6

2012-06-18

ISO/FDIS 15500-13

*

2012-03-14

ISO/FDIS 15500-14

*

2012-03-14

ISO/IEC 23001-7:2012/ DAmd 1

2012-06-18

ISO/FDIS 15500-16

*

2012-03-14

ISO Update, Supplement to ISO Focus -- February 2012

9

ISO/FDIS 15500-17

*

Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 17: Flexible fuel line (Revision of ISO 15500-17:2001) Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 18: Filter (Revision of ISO 15500-18:2001) Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 19: Fittings (Revision of ISO 15500-19:2001) Road vehicles -- Compressed natural gas (CNG) fuel systems -- Part 1: Safety requirements (Revision of ISO 15501-1:2001)

2012-03-14

TC 76

ISO/FDIS 15500-18

*

Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use

* Prefilled syringes -- Part 6: Plastic barrels for injectables 2012-03-21

2012-03-14

ISO/FDIS 11040-6

ISO/FDIS 15500-19

*

TC 83

2012-03-14 ISO 11088:2006/ FDAmd 1 2012-03-11 *

Sports and recreational equipment

Assembly, adjustment and inspection of an alpine ski/binding/ boot (S-B-B) system -- Amendment 1 2012-03-07

ISO/FDIS 15501-1

*

TC 84

TC 38

ISO/FDIS 6330 *

Textiles

Textiles -- Domestic washing and drying procedures for textile testing (Revision of ISO 6330:2000, ISO 6330:2000/Amd 1:2008) 2012-03-20 ISO/FDIS 11608-1 *

Devices for administration of medicinal products and intravascular catheters

Needle-based injection systems for medical use -- Requirements and test methods -- Part 1: Needle-based injection systems (Revision of ISO 11608-1:2000) Needle-based injection systems for medical use -- Requirements and test methods -- Part 2: Needles (Revision of ISO 11608-2:2000) 2012-03-13

TC 39

ISO/FDIS 26303 *

Machine tools

Machine tools -- Short-term capability evaluation of machining processes on metal-cutting machine tools 2012-03-26

ISO/FDIS 11608-2

*

2012-03-13

TC 43

ISO 5130:2007/ FDAmd 1 *

Acoustics

Acoustics -- Measurements of sound pressure level emitted by stationary road vehicles -- Amendment 1 2012-03-28

TC 94

Personal safety -- Protective clothing and equipment

* Protective clothing -- Test methods for clothing providing protection against chemicals -- Part 1: Determination of resistance to outward leakage of gases (internal pressure test) Protective clothing -- Test methods for clothing providing protection against chemicals -- Part 2: Determination of resistance to inward leakage of aerosols and gases (inward leakage test) 2012-03-07

ISO/FDIS 17491-1

TC 44

ISO/FDIS 16834 *

Welding and allied processes

Welding consumables -- Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels -- Classification (Revision of ISO 16834:2006) Welding consumables -- Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels -- Classification (Revision of ISO 21952:2007) Welding consumables -- Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels -- Classification (Revision of ISO 24598:2007) Resistance welding -- Destructive tests on welds in metallic materials -- Torsion test of resistance spot welds (Revision of ISO 17653:2003) 2012-03-13 ISO/FDIS 17491-2 *

2012-03-21

ISO/FDIS 21952

*

2012-03-13

TC 106

ISO/FDIS 21672-1 *

Dentistry

Dentistry -- Periodontal probes -- Part 1: General requirements 2012-03-13

ISO/FDIS 24598

*

TC 108

2012-03-13 ISO/FDIS 2954 *

Mechanical vibration, shock and condition monitoring

Mechanical vibration of rotating and reciprocating machinery -- Requirements for instruments for measuring vibration severity (Revision of ISO 2954:1975, ISO/ NP 2954) Condition monitoring and diagnostics of machines -- Data interpretation and diagnostics techniques -- Part 1: General guidelines (Revision of ISO 13379:2003) 2012-03-14

ISO/FDIS 17653

*

2012-03-20 ISO/FDIS 13379-1 *

2012-03-21

TC 67

Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries

* Petroleum, petrochemical and natural gas industries -- Spiral plate heat exchangers Petroleum, petrochemical and natural gas industries -- Hairpintype heat exchangers 2012-03-27

TC 112

ISO/FDIS 21360-1 *

Vacuum technology

Vacuum technology -- Standard methods for measuring vacuumpump performance -- Part 1: General description (Revision of ISO 21360:2007) 2012-03-25

ISO/FDIS 12211 ISO/FDIS 12212

*

2012-03-27

10

ISO Update, Supplement to ISO Focus -- February 2012

ISO/FDIS 21360-2

*

Vacuum technology -- Standard methods for measuring vacuumpump performance -- Part 2: Positive displacement vacuum pumps (Revision of ISO 1607-1:1993, ISO 1607-2:1989)

2012-03-25

ISO/IEC FDIS 29192-1 ISO/IEC 1544411:2007/ FDAmd 1 ISO/IEC 21000-4:2006/ FDAmd 2.2

*

Information technology -- Security techniques -- Lightweight cryptography -- Part 1: General Information technology -- JPEG 2000 image coding system: Wireless -- Part 11: -- Amendment 1: IP based wireless networks Information technology -- Multimedia framework (MPEG-21) -- Part 4: Intellectual Property Management and Protection Components -- Amendment 2: Protection of presentation element Information technology -- User interfaces -- Accessibility of personal computer hardware

2012-03-17

*

2012-03-25

TC 131

ISO/FDIS 1219-1 *

Fluid power systems

Fluid power systems and components -- Graphical symbols and circuit diagrams -- Part 1: Graphical symbols for conventional use and data-processing applications (Revision of ISO 1219-1:2006) 2012-03-13

*

2012-03-13

TC 135

ISO/FDIS 16810 ISO/FDIS 16811 ISO/FDIS 16831 *

Non-destructive testing

Non-destructive testing -- Ultrasonic testing -- General principles Non-destructive testing -- Ultrasonic testing -- Sensitivity and range setting Non-destructive testing -- Ultrasonic testing -- Characterization and verification of ultrasonic thickness measuring equipment 2012-03-10

ISO/IEC FDIS 29136

*

2012-03-17

*

2012-03-10

*

2012-03-10

TC 147

ISO/FDIS 9308-2 *

Water quality

Water quality -- Enumeration of Escherichia coli and coliform bacteria -- Part 2: Most probable number method (Revision of ISO 9308-2:1990) 2012-04-01

Standards published

New International Standards published between 01 January and 31 January 2012 * Available in English only ** French version of standard previously published in English only

TC 172

ISO/FDIS 19980 *

Optics and photonics

Ophthalmic instruments -- Corneal topographers (Revision of ISO 19980:2005) 2012-03-20

Price group

TC 194

ISO/FDIS 13022 *

Biological evaluation of medical devices

Medical products containing viable human cells -- Application of risk management and requirements for processing practices 2012-03-13

TC 4

ISO 355:2007/ Amd 1:2012

Rolling bearings

Rolling bearings -- Tapered roller bearings -- Boundary dimensions and series designations -- Amendment 1 XZ

TC 6

ISO 5628:2012 2012-03-28

Paper, board and pulps

Paper and board -- Determination of bending stiffness -- General principles for two-point, three-point and fourpoint methods E

TC 201

ISO/FDIS 16129 *

Surface chemical analysis

Surface chemical analysis -- Xray photoelectron spectroscopy -- Procedures for assessing the day-to-day performance of an Xray photoelectron spectrometer

TC 20

ISO 10502:2012 2012-03-13 *

Aircraft and space vehicles

Aerospace -- Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10 500 kPa -- Technical specifications and requirements K

TC 217

ISO/FDIS 11930 *

Cosmetics

Cosmetics -- Microbiology -- Evaluation of the antimicrobial protection of a cosmetic product

TC 22

ISO 15006:2011

Road vehicles

Road vehicles -- Ergonomic aspects of transport information and control systems -- Specifications for in-vehicle auditory presentation H

JTC 1

ISO/IEC FDIS 19770-1 *

Information technology

Information technology -- Software asset management -- Part 1: Processes and tiered assessment of conformance (Revision of ISO/IEC 19770-1:2006) Identification cards -- Optical memory cards -- Part 1: General characteristics (Revision of ISO/IEC 11693:2005) Information technology -- Security techniques -- Information security management for intersector and inter-organizational communications 2012-03-25

TC 23

ISO 11783-9:2012 2012-03-21

Tractors and machinery for agriculture and forestry

Tractors and machinery for agriculture and forestry -- Serial control and communications data network -- Part 9: Tractor ECU J

ISO/IEC FDIS 11693-1

*

TC 31

2012-03-07 ISO 42511:2005/Amd 1:2012

Tyres, rims and valves

Tyres (ply rating marked series) and rims for agricultural tractors and machines -- Part 1: Tyre designation and dimensions, and approved rim contours -- Amendment 1 XZ

ISO/IEC FDIS 27010

*

ISO Update, Supplement to ISO Focus -- February 2012

11

TC 34

ISO 11746:2012 ISO/TS 11869:2012

Food products

Rice -- Determination of biometric characteristics of kernels Fermented milks -- Determination of titratable acidity -- Potentiometric method D

ISO 11040-5:2012

*

Prefilled syringes -- Part 5: Plunger stoppers for injectables

C

TC 86

ISO 239531:2005/Amd 1:2012 ISO 239532:2005/Amd 1:2012

Refrigeration and air-conditioning

Refrigerated display cabinets -- Part 1: Vocabulary -- Amendment 1 Refrigerated display cabinets -- Part 2: Classification, requirements and test conditions -- Amendment 1 XZ

D

TC 37

ISO 24617-1:2012 *

Terminology and other language and content resources

Language resource management -- Semantic annotation framework (SemAF) -- Part 1: Time and events (SemAF-Time, ISO-TimeML) XC

T

TC 92

ISO 8341:1999/Amd 1:2012 *

Fire safety

Fire-resistance tests -- Elements of building construction -- Part 1: General requirements -- Amendment 1 XZ

TC 42

ISO 12231:2012 *

Photography

Photography -- Electronic still picture imaging -- Vocabulary Q

TC 94

ISO 20347:2012

Personal safety -- Protective clothing and equipment

Personal protective equipment -- Occupational footwear N

TC 43

ISO 28961:2012 *

Acoustics

Acoustics -- Statistical distribution of hearing thresholds of otologically normal persons in the age range from 18 years to 25 years under free-field listening conditions Acoustics -- Measurement of room acoustic parameters -- Part 3: Open plan offices * Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 1: Application rules for specific products -- Amendment 1: Guidelines for the determination of the sound reduction index of joints filled with fillers and or seals F

TC 106

ISO 20126:2012 H

Dentistry

Dentistry -- Manual toothbrushes -- General requirements and test methods F

ISO 3382-3:2012 ISO 101401:2010/Amd 1:2012

TC 107

ISO/TR 15922:2011 *

Metallic and other inorganic coatings

Metallic and other inorganic coatings -- Evaluation of properties of darkstain phenomenon of chromated coiled or sheet product E

XZ

TC 108

ISO 18312-1:2012 Q ISO 18312-2:2012 free * *

Mechanical vibration, shock and condition monitoring

Mechanical vibration and shock -- Measurement of vibration power flow from machines into connected support structures -- Part 1: Direct method Mechanical vibration and shock -- Measurement of vibration power flow from machines into connected support structures -- Part 2: Indirect method G

TC 45

ISO 14932:2012

Rubber and rubber products

Rubber compounding ingredients -- Organic vulcanizing agents -- Determination of organic peroxide content

TC 58

ISO 113631:2010/Cor 2:2012 *

Gas cylinders

Gas cylinders -- 17E and 25E taper threads for connection of valves to gas cylinders -- Part 1: Specifications -- Technical Corrigendum 2

K

TC 114

ISO 10552:2012

Horology

Timekeeping instruments -- Crowns and sealed tubes -- Designs and dimensions E

TC 67

Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries

Petroleum, petrochemical and natural gas industries -- Materials selection and corrosion control for oil and gas production systems Petroleum and natural gas industries -- Drilling fluids -- Processing equipment evaluation Petroleum, petrochemical and natural gas industries -- Fired heaters for general refinery service R

TC 120

ISO 14930:2012 ISO 16131:2012 U *

Leather

Leather -- Leather for dress gloves -- Specification Leather -- Upholstery leather characteristics -- Selection of leather for furniture B

ISO 21457:2010

*

ISO 13501:2011 ISO 13705:2006

C

TC 121

XC ISO 5360:2012

Anaesthetic and respiratory equipment

Anaesthetic vaporizers -- Agent-specific filling systems L

TC 68

ISO 11568-2:2012 *

Financial services

Financial services -- Key management (retail) -- Part 2: Symmetric ciphers, their key management and life cycle N

TC 123

ISO 14287:2012 *

Plain bearings

Plain bearings -- Pad materials for tilting pad bearings C

TC 76

Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use

* Prefilled syringes -- Part 3: Seals for dental local anaesthetic cartridges C

TC 127

ISO 15817:2012

Earth-moving machinery

Earth-moving machinery -- Safety requirements for remote operator control systems E

ISO 11040-3:2012

12

ISO Update, Supplement to ISO Focus -- February 2012

TC 131

ISO 16431:2012

Fluid power systems

Hydraulic fluid power -- System clean-up procedures and verification of cleanliness of assembled systems D

TC 171

ISO 12651-1:2012 ISO 14641-1:2012 XZ *

Document management applications

Electronic document management -- Vocabulary -- Part 1: Electronic document imaging Electronic archiving -- Part 1: Specifications concerning the design and the operation of an information system for electronic information preservation J

TC 138

ISO 8483:2003/ Amd 1:2012 ISO 15306:2003/ Amd 1:2012 *

Plastics pipes, fittings and valves for the transport of fluids

Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of bolted flange joints -- Amendment 1 Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the resistance to cyclic internal pressure -- Amendment 1

*

R

TC 172

XZ ISO 119797:2006/Amd 1:2012

Optics and photonics

Ophthalmic implants -- Intraocular lenses -- Part 7: Clinical investigations -- Amendment 1 XZ

*

TC 145

ISO 7000:2012 *

Graphical symbols

Graphical symbols for use on equipment -- Registered symbols free

TC 190

ISO 12914:2012 ISO 11269-2:2012 J ISO/TS 29843-2:2011 *

Soil quality

Soil quality -- Microwave-assisted extraction of the aqua regia soluble fraction for the determination of elements Soil quality -- Determination of the effects of pollutants on soil flora -- Part 2: Effects of contaminated soil on the emergence and early growth of higher plants Soil quality -- Determination of soil microbial diversity -- Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method D

TC 146

ISO 13138:2012 ISO 15202-2:2012 *

Air quality

Air quality -- Sampling conventions for airborne particle deposition in the human respiratory system Workplace air -- Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry -- Part 2: Sample preparation Air quality -- Environmental meteorology -- Part 1: Ground-based remote sensing of visual range by lidar

K

T

D

ISO 28902-1:2012

TC 201

P ISO 11039:2012 *

Surface chemical analysis

Surface chemical analysis -- Scanning-probe microscopy -- Measurement of drift rate K

TC 147

ISO 29201:2012 *

Water quality

Water quality -- The variability of test results and the uncertainty of measurement of microbiological enumeration methods V

TC 204

ISO 10711:2012 *

Intelligent transport systems

Intelligent Transport Systems -- Interface Protocol and Message Set Definition between Traffic Signal Controllers and Detectors M

TC 150

ISO 14242-1:2012

Implants for surgery

Implants for surgery -- Wear of total hip-joint prostheses -- Part 1: Loading and displacement parameters for weartesting machines and corresponding environmental conditions for test E

TC 205

ISO 16817:2012

Building environment design

Building environment design -- Indoor environment -- Design process for visual environment L

TC 156

ISO 9223:2012

Corrosion of metals and alloys

Corrosion of metals and alloys -- Corrosivity of atmospheres -- Classification, determination and estimation Corrosion of metals and alloys -- Corrosivity of atmospheres -- Guiding values for the corrosivity categories Corrosion of metals and alloys -- Corrosivity of atmospheres -- Measurement of environmental parameters affecting corrosivity of atmospheres Corrosion of metals and alloys -- Corrosivity of atmospheres -- Determination of corrosion rate of standard specimens for the evaluation of corrosivity Cathodic protection of steel in concrete Corrosion of metals and alloys -- Conventions applicable to electrochemical measurements in corrosion testing H

TC 207

ISO 14051:2011

Environmental management

Environmental management -- Material flow cost accounting -- General framework R

ISO 9224:2012

TC 210

G ISO/IEC Guide 63:2012 *

Quality management and corresponding general aspects for medical devices

Guide to the development and inclusion of safety aspects in International Standards for medical devices L

ISO 9225:2012

L

TC 211

C ISO 19142:2010

ISO 9226:2012

Geographic information/ Geomatics

Geographic information -- Web Feature Service XC

ISO 12696:2012 ISO 17474:2012

TC 218

S ISO 3129:2012 *

Timber

Wood -- Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens E

G

TC 219

ISO 10580:2010

Floor coverings

Resilient, textile and laminate floor coverings -- Test method for volatile organic compound (VOC) emissions Resilient floor coverings -- Heterogeneous poly(vinyl chloride) floor coverings -- Specification K

TC 165

ISO 22389-2:2012 *

Timber structures

Timber structures - Bending applications of I-beams -- Part 2: Component performance and manufacturing requirements D

ISO 10582:2010

D

ISO Update, Supplement to ISO Focus -- February 2012

13

ISO 10595:2010 ISO 10874:2009 ISO 24343-1:2007

Resilient floor coverings -- Semi-flexible/vinylcomposition (VCT) poly(vinyl chloride) floor tiles -- Specification Resilient, textile and laminate floor coverings -- Classification Resilient and laminate floor coverings -- Determination of indentation and residual indentation -- Part 1: Residual indentation Resilient floor coverings -- Expanded (cushioned) poly(vinyl chloride) floor covering -- Specification

D

Standards confirmed

The following International Standards are confimred for a five year period:

B

C

TC 2

ISO 8738:1986 D ISO 8749:1986

Fasteners

(reconfirmed) (reconfirmed)

ISO 26986:2010

TC 6

ISO 11093-1:1994 ISO 11093-2:1994

Paper, board and pulps

(reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed)

TC 229

ISO/TR 10929:2012

Nanotechnologies

Nanotechnologies -- Characterization of multiwall carbon nanotube (MWCNT) samples C

ISO 11093-3:1994 ISO 3038:1975

IULTCS

International Union of Leather Technologists and Chemists Societies

Leather -- Physical and mechanical tests -- Sample preparation and conditioning Leather -- Chemical tests -- Quantitative analysis of tanning agents by filter method B

TC 8

ISO 1069:1973 ISO 8468:2007 ISO 9875:2000 ISO 11606:2000 E ISO 22554:2007 ISO 22555:2007 ISO 25861:2007

Ships and marine technology

(reconfirmed) (reconfirmed) (reconfirmed)

ISO 2419:2012

ISO 14088:2012

JTC 1

ISO/IEC 15504-5:2012 *

Information technology

Information technology -- Process assessment -- Part 5: An exemplar software life cycle process assessment model Identification cards -- Physical characteristics -- Amendment 2: Opacity Information technology -- Programming languages -- Prolog -- Part 1: General core -- Technical Corrigendum 2 Information technology -- Security techniques -- Lightweight cryptography -- Part 2: Block ciphers Information technology -- MPEG systems technologies -- Part 7: Common encryption in ISO base media file format files Information technology -- Rich media user interfaces -- Part 1: Widgets -- Amendment 1: Widget extensions Information technology -- Radio frequency identification device conformance test methods -- Part 2: Test methods for air interface communications below 135 kHz Information technology -- Mobile item identification and management -- Mobile AIDC application programming interface Information technology -- Biometric performance testing and reporting -- Part 6: Testing methodologies for operational evaluation XC

TC 10

ISO 8048:1984

Technical product documentation

(reconfirmed)

TC 17

ISO 4995:2008 XZ ISO 6932:2008

Steel

ISO/IEC 7810:2003/ Amd 2:2012 ISO/IEC 13211-1:1995/ Cor 2:2012 ISO/IEC 29192-2:2012 ISO/IEC 23001-7:2012

*

*

TC 20

free ISO 413:1974 ISO 1021:1980 ISO 4153:1981 S ISO 3282:1976

Aircraft and space vehicles

(reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed)

*

TC 22

ISO/TS 16951:2004 ISO 7575:1993

Road vehicles

(reconfirmed) (reconfirmed)

*

F

TC 23

XZ ISO 5675:2008 ISO 21628:2008 N ISO 7915:1991

ISO/IEC 23007-1:2010/ Amd 1:2012 ISO/IEC 18047-2:2012

*

Tractors and machinery for agriculture and forestry

*

(reconfirmed)

TC 24

ISO 4782:1987 ISO 4783-1:1989

Particle characterization including sieving

(reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed)

ISO/IEC 29179:2012

*

J

ISO 4783-2:1989 ISO 7805-1:1984 ISO 7805-2:1987

ISO/IEC 19795-6:2012

*

P

ISO 7806:1983 ISO 10630:1994 ISO 14315:1997

TC 34

ISO 3634:1979 ISO 5520:1981 ISO 6560:1983 ISO 605:1991 ISO 2164:1975

Food products

(reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed)

14

ISO Update, Supplement to ISO Focus -- February 2012

ISO 6322-1:1996 ISO 6820:1985 ISO 7304-2:2008 ISO 488:2008 ISO 707:2008 ISO 2446:2008 ISO 9231:2008 ISO 20541:2008 ISO 6865:2000 ISO 934:1980 ISO 935:1988 ISO 5555:2001 ISO 6884:2008 ISO 8294:1994 ISO 15301:2001 ISO 15303:2001

(reconfirmed) (reconfirmed)

TC 131

ISO 6022:2006 ISO 3968:2001 ISO 11500:2008 ISO 4412-1:1991 ISO 4412-2:1991 ISO 4412-3:1991 ISO 15086-1:2001

Fluid power systems

(reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed)

(reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed)

TC 146

ISO 13752:1998

Air quality

(reconfirmed)

TC 147

ISO 10705-1:1995 ISO 10705-4:2001

Water quality

(reconfirmed) (reconfirmed)

TC 155

ISO 7520:1985 ISO 7525:1985 ISO 7530-1:1990 ISO 8343:1985

Nickel and nickel alloys

(reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed)

TC 38

ISO 9073-5:2008

Textiles Welding and allied processes

(reconfirmed)

TC 44

ISO 6520-2:2001

TC 159

ISO 10075-2:1996 ISO 7250-1:2008 ISO 1503:2008 ISO 9241-171:2008

Ergonomics

(reconfirmed)

TC 58

ISO 32:1977 ISO 13769:2007

Gas cylinders

(reconfirmed)

TC 69

ISO 5725-1:1994 ISO 5725-6:1994

Applications of statistical methods

(reconfirmed) (reconfirmed)

TC 171

ISO 8514-1:2000 ISO 8514-2:2000 ISO 11698-1:2000 ISO 11698-2:2000 ISO 11928-1:2000 ISO 11928-2:2000

Document management applications

(reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed)

TC 79

ISO 22960:2008 ISO 22961:2008 ISO 22962:2008 ISO 22963:2008

Light metals and their alloys

TC 92

ISO/TR 5925-2:2006

Fire safety Personal safety -- Protective clothing and equipment

ISO 12653-1:2000 ISO 12653-2:2000

TC 94

ISO 17491-3:2008 ISO 17491-4:2008

TC 185

ISO 4126-9:2008

Safety devices for protection against excessive pressure Information technology

(reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed)

JTC 1 Chains and chain sprockets for power transmission and conveyors

(reconfirmed) (reconfirmed) ISO/IEC 1539-2:2000 ISO/IEC 13211-2:2000 ISO/IEC 14515-1:2000 ISO/IEC ISP 15287-2:2000 ISO/IEC 23270:2006 ISO/IEC 13250-2:2006

TC 100

ISO 6973:1986 ISO 9633:2001

TC 106

ISO 15854:2005 ISO 20795-1:2008

Dentistry

TC 111

ISO 3077:2001

Round steel link chains, chain slings, components and accessories

(reconfirmed)

TC 118

ISO 10440-1:2007 ISO 5393:1994

Compressors and pneumatic tools, machines and equipment

(reconfirmed)

Standards withdrawn

Period from 01 January to 31 January 2012

TC 119

ISO 3923-1:2008 ISO 4490:2008

Powder metallurgy

TC 34 Anaesthetic and respiratory equipment

ISO 11869:1997

Food products

(replaced by ISO/TS 11869:2012)

TC 121

ISO 5364:2008

TC 131

ISO/TS 16431:2002

Fluid power systems

(replaced by ISO 16431:2012)

ISO Update, Supplement to ISO Focus -- February 2012

15

CASCO

ISO/IEC 17021:2006

Committee on conformity assessment

(replaced by )

13-14 Orlando (USA) 13-17 Dublin (Ireland) 15-16 Orlando (USA) 15-16 Geneva (Switzerland) 20-24 Guangzhou (China) **

TC 219 TC 262 TC 184 TMB JTC 1/SC 6

Floor coverings Project committee: Risk management Automation systems and integration Technical Management Board Information technology/Telecommunications and information exchange between systems Project Committee: Road-Traffic Safety Management System Information technology/User interfaces Tractors and machinery for agriculture and forestry/Common tests Optics and photonics/Electro-optical systems Tractors and machinery for agriculture and forestry/Operator controls, operator symbols and other displays, operator manuals Road vehicles/ Motorcycles Metallic and other inorganic coatings Industrial trucks Machine tools/Woodworking machines Optics and photonics/Ophthalmic optics and instruments Tyres, rims and valves/Passenger car tyres and rims Tyres, rims and valves/Cycle, moped, motorcycle tyres and rims Tyres, rims and valves Cranes/Design principles and requirements Road vehicles/Ignition equipment Joint Project Committee - Energy efficiency and renewable energy sources - Common terminology Tractors and machinery for agriculture and forestry/Manually portable forest machinery Tractors and machinery for agriculture and forestry/Agricultural electronics

JTC 1

ISO/IEC 6592:2000 ISO/IEC 18019:2004 ISO/IEC TR 18047-2:2006

Information technology

(replaced by ISO/IEC 26514:2008) (replaced by ISO/IEC 26514:2008) (replaced by ISO/IEC 18047-2:2012)

20-24 Johannesburg (South Africa)

TC 241

Meeting calendar

(update at 01 January 2012) Meetings called for the month of December are not in this edition. * Information definite but meeting not yet formally convened ** Provisional

20-25 Kyoto (Japan) 21 Paris (France)

JTC 1/SC 35 TC 23/SC 2

21-23 Nara (Japan)

TC 172/SC 9

January-February 2012

30-4 Paris (France) TC 236 Project Committee: Project Management Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing conditions Plain bearings/Dimensions, tolerances and construction details Dimensional and geometrical product specifications and verification Plain bearings/ Quality analysis and assurance Plain bearings/Terms and common items Project, programme and portfolio management Plain bearings Plain bearings/Special types of plain bearings Project committee: Asset management Pumps Ships and marine technology/Ship design Road vehicles/Electrically propelled road vehicles Automation systems and integration/ Robots and robotic devices

22-23 Courbevoie, Paris (France)

TC 23/SC 14

February 2012

1 Bangkok (Thailand) TC 123/SC 2 24 Kuala Lumpur (Malaysia) Berlin (Germany) TC 22/SC 22

February-March 2012

28-2 TC 107

1

Bangkok (Thailand) Charlotte (USA)

TC 123/SC 3

March 2012

7-8 Geneva (Switzerland) TC 110 TC 39/SC 4 TC 172/SC 7

1-9

TC 213

12-14 Frankfurt (Germany) 13-16 Milan (Italy)

2

Bangkok (Thailand) Bangkok (Thailand) Paris (France)

TC 123/SC 5

14

Kyoto (Japan)

TC 31/SC 3

2 2

TC 123/SC 6 TC 258

14

Kyoto (Japan)

TC 31/SC 10

3 3

Bangkok (Thailand) Bangkok (Thailand) Pretoria (South Africa) St. Petersburg, Florida (USA) London (United Kingdom) Berlin (Germany) *

TC 123 TC 123/SC 7

15

Kyoto (Japan)

TC 31 TC 96/SC 10 TC 22/SC 1 JTC 2

19-21 Paris (France) 20-21 London (United Kingdom) 20-23 Buenos Aires (Argentina)

6 8 8-10

TC 251 TC 115 TC 8/SC 8

26-28 Charlotte (USA)

TC 23/SC 17

10

TC 22/SC 21

13-14 Orlando (USA)

TC 184/SC 2

29

Frankfurt (Germany)

TC 23/SC 19

16

ISO Update, Supplement to ISO Focus -- February 2012

29

Kuala Lumpur (Malaysia)

TC 104/SC 4

Freight containers/ Identification and communication Tractors and machinery for agriculture and forestry/Powered lawn and garden equipment Non-destructive testing/Acoustic emission testing Particle characterization including sieving/Particle characterization Sterilization of health care products Intelligent transport systems Project committee: Sustainability criteria for bioenergy Fans Non-destructive testing/Ultrasonic testing Non-destructive testing/Radiation methods Welding and allied processes/Health and safety Non-destructive testing/Surface methods Non-destructive testing/Leak detection methods Non-destructive testing/Infrared thermography for non-destructive testing Control and protective devices for gas and/or oil burners and appliances Non-destructive testing/Personnel qualification Food products/Sensory analysis Devices for administration of medicinal products and intravascular catheters Non-destructive testing Sports and recreational equipment/Ice hockey equipment and facilities Iron ore and direct reduced iron Buildings and civil engineering works/ Design life

23-27 Winterthur (Switzerland)

TC 108/SC 2

29-30 Charlotte (USA)

TC 23/SC 13

April 2012

16 Durban (South Africa) TC 135/SC 9

Mechanical vibration, shock and condition monitoring/Measurement and evaluation of mechanical vibration and shock as applied to machines, vehicles and structures Rolling bearings/ Tolerances, tolerance definitions and symbols (including GPS) Food products Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/ Pipeline transportation systems Ergonomics Rolling bearings/Ball bearings Fire safety/Fire safety engineering Petroleum products and lubricants Petroleum products and lubricants/Measurement of refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels Energy Management Health informatics Hydrometry/Velocity area methods Road vehicles/Ergonomics applicable to road vehicles Information and documentation Information and documentation/Technical interoperability Information and documentation/Archives/ records management Hydrometry Hydrometry/Instruments, equipment and data management Graphical symbols/ Public information symbols Welding and allied processes/Health and safety Graphical symbols/ Safety identification, signs, shapes, symbols and colours

25

Yokohama (Japan)

*

TC 4/SC 4

16-17 Graz (Austria)

TC 24/SC 4

26-27 Nairobi (Kenya) 26-27 Moscow (Russian Federation)

TC 34 TC 67/SC 2

16-20 La Plaine StDenis (France) 16-20 Melbourne (Australia) 16-20 Chicago (USA)

* **

TC 198 TC 204 TC 248

26-27 Vienna (Austria) 27 27 Yokohama (Japan) Volos (Greece) **

TC 159 TC 4/SC 12 TC 92/SC 4

17 17 17

Senlis (France) Durban (South Africa) Durban (South Africa) Milan (Italy)

**

TC 117 TC 135/SC 3 TC 135/SC 5

May 2012

1-4 2 Jeju (Korea, Republic of) Jeju (Korea, Republic of) * * TC 28 TC 28/SC 5

18

TC 44/SC 9

18 18

Durban (South Africa) Durban (South Africa) Durban (South Africa)

* *

TC 135/SC 2 TC 135/SC 6

3 6-9 7 7-10

Dublin (Ireland) Vancouver (Canada) Ittigen (Switzerland) Berlin (Germany)

** *

TC 242 TC 215 TC 113/SC 1 TC 22/SC 13

18

TC 135/SC 8

18

Glasgow, Scotland (United Kingdom) Durban (South Africa)

TC 161

7-11 7-11

Berlin (Germany) Berlin (Germany)

**

TC 46 TC 46/SC 4

19

TC 135/SC 7

19-20 Toulouse (France) 20 Deerfield (USA)

TC 34/SC 12 TC 84

7-11

Berlin (Germany)

*

TC 46/SC 11

7-11 8

Ittigen (Switzerland) Ittigen (Switzerland)

TC 113 TC 113/SC 5

20

Durban (South Africa)

*

TC 135 TC 83/SC 5

23-26 Prague (Czech Republic)

8-10

Sydney (Australia) Berlin (Germany) **

TC 145/SC 1

23-26 Cape Town (South Africa) 23-27 Oslo (Norway)

** **

TC 102 TC 59/SC 14

9

TC 44/SC 9

9

Sydney (Australia)

TC 145/SC 2

ISO Update, Supplement to ISO Focus -- February 2012

17

9-10

Haifa (Israel)

TC 184/SC 5

Automation systems and integration/Interoperability, integration, and architectures for enterprise systems and automation applications Particle characterization including sieving/ Test sieves, sieving and industrial screens Financial services Financial services Hydrometry/Sediment transport Hydrometry/Ground water Graphical symbols Solid biofuels Particle characterization including sieving Information technology/IT Security techniques Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/ Drilling and production equipment Committee on consumer policy Aircraft and space vehicles/Space systems and operations Machine tools/Test conditions for metal cutting machine tools Tractors and machinery for agriculture and forestry/Safety and comfort Project committee: Outsourcing Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/ Casing, tubing and drill pipe Furniture Technical product documentation/Mechanical engineering documentation Technical product documentation Information technology/Software and systems engineering Traditional chinese medicine Information technology/Distributed application platforms and services (DAPS)

21-25 Mississauga (Canada) 22 Delft (Netherlands) Delft (Netherlands)

* **

TC 171 TC 195

Document management applications Building construction machinery and equipment Building construction machinery and equipment/Machinery and equipment for concrete work Assistive products for persons with disability/Accessible design Welding and allied processes/Unification of requirements in the field of metal welding Packaging/Packaging and Environment Assistive products for persons with disability Steel/Steels for structural purposes Welding and allied processes/Soldering materials Building construction machinery and equipment Tourism and related services Paints and varnishes Paints and varnishes/ General test methods for paints and varnishes Paints and varnishes/ Preparation of steel substrates before application of paints and related products Paints and varnishes/ Protective paint systems for steel structures Welding and allied processes/Equipment for gas welding, cutting and allied processes Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/ Processing equipment and systems Nuclear energy, nuclear technologies, and radiological protection/Radiological protection Welding and allied processes/Welding consumables

22

*

TC 195/SC 1

10

Berlin (Germany)

TC 24/SC 8

10 10 10 10 10 10 11

Chicago (USA) Chicago (USA) Ittigen (Switzerland) Ittigen (Switzerland) Sydney (Australia) Stockholm (Sweden) Berlin (Germany)

* **

TC 68 TC 68 TC 113/SC 6 TC 113/SC 8 TC 145 TC 238 TC 24

23

Tokyo (Japan)

TC 173/SC 7

23-24 Düsseldorf (Germany)

*

TC 44/SC 10

24 24

Seoul (Korea, Republic of) Tokyo (Japan) ** * **

TC 122/SC 4 TC 173 TC 17/SC 3 TC 44/SC 12

24-25 Paris (France) 25 Seoul (Korea, Republic of) Delft (Netherlands) Seoul (Korea, Republic of) Helsinki (Finland) Helsinki (Finland)

14-15 Stockholm (Sweden) 14-15 Rio de Janeiro (Brazil)

*

JTC 1/SC 27

**

TC 67/SC 4

25

*

TC 195

25

**

TC 228

May-June 2012

28-1 28-1 ** ** TC 35 TC 35/SC 9

14-17 Nadi (Fiji) 14-18 Campos do Jordão (Brazil) 14-18 Hangzhou (China) 15-16 Luzern (Switzerland)

*

COPOLCO TC 20/SC 14

*

TC 39/SC 2

28-1

Helsinki (Finland)

**

TC 35/SC 12

TC 23/SC 3

28-1

Helsinki (Finland)

**

TC 35/SC 14

15-16 Paris (France) 15-17 Buenos Aires (Argentina)

TC 259 TC 67/SC 5

31-1

Paris (France)

*

TC 44/SC 8

31-1

London (United Kingdom)

TC 67/SC 6

16 17

Milan (Italy) Orlando (USA)

*

TC 136 TC 10/SC 6

June 2012

4 Paris (France) * TC 85/SC 2

18

Orlando (USA) *

TC 10 JTC 1/SC 7

20-25 Jeju (Korea, Republic of) 21-24 Daejon (Korea, Republic of) 21-25 Berlin (Germany)

* **

TC 249 JTC 1/SC 38

4-5

Berlin (Germany)

**

TC 44/SC 3

18

ISO Update, Supplement to ISO Focus -- February 2012

4-7

Paris (France)

*

TC 85/SC 5

Nuclear energy, nuclear technologies, and radiological protection/Nuclear fuel cycle Nuclear energy, nuclear technologies, and radiological protection/Reactor technology Welding and allied processes/Representation and terms Nuclear energy, nuclear technologies, and radiological protection Cranes Automation systems and integration/Industrial data Acoustics/Underwater acoustics Tobacco and tobacco products Anaesthetic and respiratory equipment Anaesthetic and respiratory equipment/ Breathing attachments and anaesthetic machines Nanotechnologies Project committee: Asset management Water quality Steel/Steel wire rod and wire products Water quality/Radiological methods Technical Management Board Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/ Drilling and completion fluids, and well cements Refrigeration and air-conditioning/ Testing and rating of air-conditioners and heat pumps Surface active agents Applications of statistical methods Industrial trucks/ Rough-terrain trucks Chains and chain sprockets for power transmission and conveyors Committee on reference materials Steel/Steel castings

20-21 Milan (Italy)

**

TC 29/SC 10

Small tools/Assembly tools for screws and nuts, pliers and nippers Cork Terminology and other language and content resources Environmental management Food products/ Microbiology Terminology and other language and content resources/ Terminographical and lexicographical working methods Personal safety -Protective clothing and equipment/Eye and face protection Mechanical vibration, shock and condition monitoring Mechanical vibration, shock and condition monitoring/Use and calibration of vibration and shock measuring instruments Steel/Tinplate and blackplate Valves/Valve actuator attachment Mechanical vibration, shock and condition monitoring/Vibration and shock generating systems Welding and allied processes/Resistance welding and allied mechanical joining Small craft Document management applications/ Quality Document management applications/ Application issues Document management applications/ General issues Document management applications/ General issues Geographic information/ Geomatics Welding and allied processes/Unification of requirements in the field of metal welding

22

Porto (Portugal)

* *

TC 87 TC 37

4-7

Paris (France)

*

TC 85/SC 6

24-29 Madrid (Spain)

7

Berlin (Germany)

TC 44/SC 7

24-30 Bangkok (Thailand) 25-29 Brussels (Belgium) 25-29 Madrid (Spain)

* * *

TC 207 TC 34/SC 9 TC 37/SC 2

8

Paris (France)

TC 85

9

Berlin (Germany)

* *

TC 96 TC 184/SC 4

10-15 Stockholm (Sweden) 11-13 Woods Hole (USA) 11-13 Dresden (Germany) 11-15 Kyoto (Japan) 11-15 Kyoto (Japan)

25-29 St Paul, Minnesota (USA)

*

TC 94/SC 6

TC 43/SC 3 * TC 126 TC 121 ** TC 121/SC 1

25-29 Buffalo (USA)

TC 108

25-29 Buffalo (USA)

*

TC 108/SC 3

11-15 Stresa (Italy) 11-15 Prague (Czech Republic) 11-16 La Plaine StDenis (France) 12-13 (France) 13 Paris (France)

** ** * ** * * **

TC 229 TC 251 TC 147 TC 17/SC 17 TC 147/SC 3 TMB TC 67/SC 3

26-27 Düsseldorf (Germany) 26-27 Berlin (Germany) 28 Buffalo (USA)

*

TC 17/SC 9 TC 153/SC 2

*

TC 108/SC 6

29

Paris (France)

*

TC 44/SC 6

13-14 Geneva (Switzerland) 14 Westminster, Colorado (USA)

29

Oranjewoud (Netherlands) (Unknown)

* **

TC 188 TC 171/SC 1

(Unknown)

**

TC 171/SC 2

14

Brugge (Belgium) **

TC 86/SC 6

(Unknown)

**

TC 171/SC 3

(Canada)

**

TC 171/SC 3

14-15 (Europe) 16-22 Tokyo (Japan) 17-24 Kruger Park (South Africa) 18-20 Yangzhou (China)

** ** *

TC 91 TC 69 TC 110/SC 4 TC 100

2nd Quarter 2012

(France) ** TC 211

July 2012

16 Denver (USA) * TC 44/SC 10

19-22 Vienna (Austria) 20-21 Paris (France)

* *

REMCO TC 17/SC 11

ISO Update, Supplement to ISO Focus -- February 2012

19

18

Denver (USA)

**

TC 44/SC 11

Welding and allied processes/Qualification requirements for welding and allied processes personnel Additive manufacturing Welding and allied processes Acoustics/Building acoustics Information technology/Coding of audio, picture, multimedia and hypermedia information Clinical laboratory testing and in vitro diagnostic test systems Information technology/User interfaces Thermal performance and energy use in the built environment Building environment design Cleaning equipment for air and other gases Information technology/Information technology for learning, education and training Equipment for fire protection and fire fighting/Manually transportable fire extinguishers Information technology/Programming languages, their environments and system software interfaces Fine ceramics Mechanical vibration, shock and condition monitoring/Human exposure to mechanical vibration and shock Valves/Design, manufacture, marking and testing Tractors and machinery for agriculture and forestry/Equipment for crop protection Timber structures Packaging Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries General Assembly

22

San Diego (USA)

** **

COUNCIL TC 164/SC 3

Council Mechanical testing of metals/Hardness testing Building Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T) Essential oils Information technology/Distributed application platforms and services (DAPS) Health informatics Mechanical testing of metals/Ductility testing Mechanical testing of metals/Fatigue testing Mechanical testing of metals/Uniaxial testing Mechanical testing of metals Equipment for fire protection and fire fighting/Fire detection and alarm systems Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems using foam and powder Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas Sizing systems and designations for clothes Dimensional and geometrical product specifications and verification Timber Materials for the production of primary aluminium Dentistry Automation systems and integration/Physical device control Safety of amusement rides and amusement devices Food products/ Animal and vegetable fats and oils

23-26 Rio de Janeiro (Brazil) 24-25 Ottawa (Canada) 24-25 Rio de Janeiro (Brazil)

18-19 Berlin (Germany) 19-20 Denver (USA) 20 21 Lancaster (USA) Stockholm (Sweden)

* ** ** **

TC 261 TC 44 TC 43/SC 2 JTC 1/SC 29

* **

TAG 8 TC 164/SC 4

24-26 Sydney (Australia) 24-28 Stockholm (Sweden)

* **

TC 54 JTC 1/SC 38

August 2012

22-24 Berlin (Germany) * TC 212

24-28 Vienna (Austria) 25-26 Rio de Janeiro (Brazil) 25-27 Rio de Janeiro (Brazil) 27 Rio de Janeiro (Brazil) Rio de Janeiro (Brazil) Milan (Italy)

** **

TC 215 TC 164/SC 2

27-31 Montreal (Canada)

**

JTC 1/SC 35

** **

TC 164/SC 5 TC 164/SC 1

September 2012

3-7 La Rochelle (France) La Rochelle (France) Zurich (Switzerland) Busan (Korea, Republic of) ** TC 163

28

** **

TC 164 TC 21/SC 3

3-7 7

** **

TC 205 TC 142

Milan (Italy)

**

TC 21/SC 6

8-16

*

JTC 1/SC 36

10

Milan (Italy)

*

TC 21/SC 2

Milan (Italy)

**

TC 21/SC 8

10-11 Geneva (Switzerland)

*

JTC 1/SC 22

(Korea, Republic of) Cadiz (Spain)

**

TC 133

**

TC 213

10-12 Shandong (China) 10-14 Nancy (France)

*

TC 206 TC 108/SC 4

Rotorua (New Zealand) (Switzerland)

** **

TC 218 TC 226

10-14 La Plaine StDenis (France) 14 Beijing (China)

*

TC 153/SC 1

September-October 2012

30-6 Paris (France) Frankfurt (Germany) Berlin (Germany) * ** TC 106 TC 184/SC 1

*

TC 23/SC 6

3rd Quarter 2012

17-21 Stockholm (Sweden) 18-20 Berlin (Germany) 19-20 Rio de Janeiro (Brazil)

** * *

TC 165 TC 122 TC 67

**

TC 254

October 2012

1-2 Ottawa (Canada) * TC 34/SC 11

19-21 San Diego (USA)

20

**

GA

ISO Update, Supplement to ISO Focus -- February 2012

3

Ottawa (Canada)

*

TC 34/SC 2

Food products/Oleaginous seeds and fruits and oilseed meals Light metals and their alloys/Organic and anodic oxidation coatings on aluminium Graphic technology Processes, data elements and documents in commerce, industry and administration Safety of machinery Steel and aluminium structures Optics and photonics/ Geodetic and surveying instruments Committee on conformity assessment Powder metallurgy Technical product documentation/Construction documentation Buildings and civil engineering works Earth-moving machinery Fasteners/Reference standards Paper, board and pulps Rubber and rubber products Rubber and rubber products/Hoses (rubber and plastics) Rubber and rubber products/Products (other than hoses) Air quality

18-19 (Korea, Republic of) 19 19 Sydney (Australia) Riccione (Italy)

** ** *

TC 17 TC 2 TC 45/SC 3

Steel Fasteners Rubber and rubber products/Raw materials (including latex) for use in the rubber industry Fire safety Fire safety/Fire initiation and growth Fire safety/Fire containment Fire safety/Fire threat to people and environment Safety of toys Personal safety -Protective clothing and equipment/ Respiratory protective devices Plastics pipes, fittings and valves for the transport of fluids/ Plastics pipes and fittings for soil, waste and drainage (including land drainage) Plastics pipes, fittings and valves for the transport of fluids/ Plastics pipes and fittings for water supplies Plastics pipes, fittings and valves for the transport of fluids/ Plastics pipes and fittings for the supply of gaseous fuels Plastics pipes, fittings and valves for the transport of fluids/ Plastics pipes and fittings for industrial applications Plastics pipes, fittings and valves for the transport of fluids/ General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications Plastics pipes, fittings and valves for the transport of fluids/ Reinforced plastics pipes and fittings for all applications Plastics pipes, fittings and valves for the transport of fluids/ Valves and auxiliary equipment of plastics materials Vacuum technology

5

Berlin (Germany)

*

TC 79/SC 2

6 8-12

Chicago (USA) (USA)

* **

TC 130 TC 154

21-26 Sapporo (Japan) 21-26 Sapporo (Japan) 21-26 Sapporo (Japan) 21-26 Sapporo (Japan)

* * ** **

TC 92 TC 92/SC 1 TC 92/SC 2 TC 92/SC 3

9-10

Montreal (Canada)

* * *

TC 199 TC 167 TC 172/SC 6

10-11 Berlin (Germany) 10-12 Munich (Germany) 11-12 Bogota (Colombia) 11-12 Tokyo (Japan) 14-18 Tokyo (Japan)

22-26 (Japan) 22-27 Jeju (Korea, Republic of)

**

TC 181 TC 94/SC 15

* * **

CASCO TC 119 TC 10/SC 8

23

Sydney (Australia)

**

TC 138/SC 1

14-19 Tokyo (Japan) 14-19 Praia do Forte (Brazil) 15 Sydney (Australia)

**

TC 59 TC 127

24

Sydney (Australia)

**

TC 138/SC 2

** * * *

TC 2/SC 7 TC 6 TC 45 TC 45/SC 1

15-19 Montreal (Canada) 15-19 Riccione (Italy) 15-19 Riccione (Italy)

24

Sydney (Australia)

**

TC 138/SC 4

25

15-19 Riccione (Italy)

**

TC 45/SC 4

Sydney (Australia)

**

TC 138/SC 3

15-19 Amsterdam (Netherlands) 16 Sydney (Australia) Sydney (Australia) (Korea, Republic of)

* **

TC 146 TC 2/SC 11

25 Fasteners/Fasteners with metric external thread Fasteners/Surface coatings Steel/Methods of testing (other than mechanical tests and chemical analysis) Road vehicles/Vehicle dynamics and roadholding ability Microbeam analysis Fasteners/Fasteners with metric internal thread Rubber and rubber products/Testing and analysis Sports and recreational equipment 25

Sydney (Australia)

**

TC 138/SC 5

17 17

** **

TC 2/SC 14 TC 17/SC 7

25

17

Berlin (Germany)

*

TC 22/SC 9

Sydney (Australia)

**

TC 138/SC 6

17-19 Guilin (China) 18 Sydney (Australia) Riccione (Italy)

* **

TC 202 TC 2/SC 12

Sydney (Australia)

**

TC 138/SC 7

18

*

TC 45/SC 2

18

Berlin (Germany)

**

TC 83

25-26 Tampa, Florida (USA)

**

TC 112

ISO Update, Supplement to ISO Focus -- February 2012

21

Information

21 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

135388


You might also be interested in

BETA
Dn-0740.pm6
ChemE_AR01.qxd
untitled
britStand.set