Read EON315.qxd text version

JBL Incorporated, 8500 Balboa Boulevard, P.O. Box 2200, Northridge, California 91329 U.S.A.

Technical Manual

JBL EON315 SPECIFICATIONS

ACOUSTIC & ELECTRICAL SPECIFICATIONS:

· System Power Rating: · Frequency Response: · Frequency Range: position) · LF Power Amp: · HF Power Amp: · Input Gain: 280W continuous, 560W peak 50 Hz ­ 18 kHz (± 3 dB) (EQ in "Flat" position) 38 Hz ­ 20 kHz (-10 dB) (EQ in "Flat" 220W continuous at driver impedance 60W continuous at driver impedance Mic position: - Infinity to +40 dB Line position:- Infinity to +4 dB (+20 dBu Max signal input) 64 K ohms (balanced), 32 K (unbal anced) LF +3 dB Shelving Filter @ 150 Hz HF +2.5 dB Shelving Filter @4 kHZ Preset high pass @ 120 Hz 127 dB 1.8 kHz 441956-001 M115-2 380 mm (15 in) 1.4 ohm ±10%

SYSTEM COMPONENTS: (CONT'D)

· High Frequency Transducer: · DC Resistance: · Input connector: · Output Connector: · XLR Pin Assignments: A. System Aural Sweep Test: 2414H-1 25.4 mm (1 in) polymer diaphragm, neodymium compression driver 3.60 ohm ±0.2% Balanced XLR / 1/4 inch TRS combo jack Balanced male XLR, +20 dBu (peak) Pin 2 (+), Pin 3 (-), Pin 1 (GND) 200V Input, 20 Hz to 20 kHz Sweep Duration: 5 seconds Volume Control Full Clockwise 3.5V Input, 20 Hz to 2 kHz .75V Input, 500 Hz to 1.5 kHz

AURAL SWEEP TEST SPECIFICATIONS:

· Input Inpedance: · Boost EQ: · Low Cut Filter: · Maximum SPL: · Crossover Frequency:

B. L.F. Aural Sweep Test: C. H.F. Aural Sweep Test:

PHYSICAL SPECIFICATIONS:

· Enclosure Dimensions: · Shipping Weight: 685 x 438 x 366 mm D (27 x 17.3 x 14.4 in D) 35 lb (15.9 kg.)

SYSTEM COMPONENTS:

· Baffe/Grille Assembly: · Low Frequency Transducer: · DC Resistance:

WARRANTY INFORMATION:

· Refer to Warranty Statement packed with each product.

PACKAGE

Warranty 59660 Owners Manual 440940-001 (available from web-site only)

WIRING DIAGRAM

Driver, High Freq 2414H-1 (363858-001X) Driver, Low Freq M115-2 (365153-001)

Fillers, (2) 364823-001 Bag 322591-001 19" x16" x 42" LG .003 THKLDPE CLR Carton 364824-001 Cord, AC, Line 425-00000-00 120V 425-00000-01 230V

+

+

GRN/BLK 0.205 BLU/BLK 0.205

GRN 0.250

Amplifier Assembly Wire Harness Assembly 365375-001

BLU 0.250

SEE SCHEMATIC PAGE

11-12

JBL EON315 REV L

SCHEMATIC ( Wire Harness) 365375-001

JBL EON315

JBL EON315

COMPONENT EXPLODED VIEW

Please note: (grille assembly Screw (8) 365270-001 not available seperately) M4 x 65 Baffle/ Grille Screw (2) Assembly Screw (12) 365270-002 441956-001 862-41210-08 M4-35mm 6 X 1/2 PAN,PH,TYPE AB,BLK ZINC LCS

JBL EON315

Fly Bolt (5) 364616-001 Cover, Bolt (2) 364805-002 Upper Handle 364654-002 Nut (5) 838-00800-00 M14,REG,CLR ZINC,RH Washer (5) 848-00100-02 M14,REG,CLR ZINC Enclosure Amp Board Assembly EON315 444971-001 (Not Available for Sale) Input Module 364948-001 Gasket, Enclosure 364835-001 A/C Inlet Connector 365428-001 Screw (6) 813-41300-15 M3.5X 15MM PAN,PH,CLR ZINC,LCS Wire Harness 365375-001 Heatsink 365315-001 Side Handle (2) 364938-001 Screw (8) 814-41300-25 M4X 25MM PAN,PH,CLR AC Inlet Connector ZINC,LCS 365428-001 Gasket,Input Module (4) 364947-001 Amplifier Sheild 365499-001 Driver, High Freq 2414H-1 (363858-001X)

Eon Letters 364656-002 Badge,Cover 364937-001

Screw 813-21300-10 M3.5X 10MM RND,PH,CLR ZINC,LCS (Logo)

Logo Assembly 365399-001

Thumbscrew 364983-001 Driver, Low Freq M115-2 (365153-001) Screw (8) 804-01110-16 10-32 x 1 FIL,PH,BLK ZINC LCS Rubber Foot (2) Input Cover Box Input Module 364948-001 364677-001 364802-001 Input Plate 364939-001

JBL EON315

Information

EON315.qxd

3 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

910637