Read 5988-2396en.qxp text version

Agilent E6474A Wireless Network Optimization Platform

Configuration Guide

The purpose of this configuration guide is to assist you in ordering the correct system configuration for your application. The Agilent E6474A wireless network optimization platform is used to obtain RF coverage measurements and service performance measurements for wireless communications networks. The Windows® based software runs on a PC that interfaces with an Agilent digital RF receiver and with cdmaOne, cdma2000, GSM, GPRS, GAIT, UMTS, TDMA and/or iDEN phones. The system can be configured to include receivers and/or phones from one or a combination of technologies simultaneously. The system can control up to four phones (two phones for simultaneous trace/data measurements). Recommended minimum PC specifications:

· · · · · · · ·

Windows® 2000 or XP Professional (including XP for Pentablet) 600MHz PIII, 256MB RAM RS-232 DB9 serial port or USB Port Parallel port or USB Port (for software key) PCMCIA slot or a USB connection (for multiple hardware support) 500 MB hard disk space CD-ROM drive recommended for installation 1024 x 768 display resolution minimum The Agilent network optimization drive test solution can be ordered through part numbers E6473B, E6474A, E6450C, E6451C, E6452C, E6453C, E6454C, E6455C, E6456C, E6457C, E6478C, E7456C, E7468A, 86154A, 86156A, E5641A, E5642A, and E5643A. These part numbers are described in this document.

Configuration Process · · · ·

Before using this configuration guide, the following decisions need to be made: What technology is required? What software measurements are required? What phone and/or receiver hardware is going to be needed? What accessories are required?

2

This configuration guide is set-out to show the decision process flow you use when choosing your system.

Choose Software Options

See Part 1

Choose Platform Software Options

See Part 2

Choose Post-processing Options

See Part 3

Choose Receiver Options

See Part 4

Choose Phone Options

See Part 5

Choose Hardware Accessory Options

See Part 6

or Choose Bundled System Kit Options

See Part 7

System Upgrade Options

See Part 8

Support and Training Options Part 10 shows some ordering examples.

See Part 9

3

Part 1: Software Options

Select which E6474A software option matches your technology and measurement requirements.

License Description cdma One cdma 2000 GSM GAIT W-CDMA /UMTS iDEN TDMA GPRS

Phone measurements Receiver measurements Receiver and phone measurements combination TechTool1 phone measurements TechTool L2/L3/CAI Messages

100 110 120 130 072

101 111 121 131 073

200 210 220 230

250

300 310 320

400 410 420

500 510 520 530 076

600

270

620

Table 1- Technology specific software options

Note: UMTS phone-based measurement licenses provided access to GSM/GPRS measurements. However this only applies to UMTS multi-RAT UE hardware. 1. TechTool enables low-end measurement capability at a lower price. For example, E6474A-130 and E6474A-070 will provide CDMA phone measurement view and logging only. Example: To order Receiver and Phone measurement combination for cdma2000 technology system select E6474A-121 Software upgrades and required options: UMTS receiver software to phone and receiver Combo UMTS to HSDPA phone measurement upgrade software license UMTS to Motorola E1000 measurement upgrade software license GSM/GPRS to UMTS phone measurements GSM/GPRS to EDGE phone measurement cdma2000 to 1xEVDO phone measurement cdma2000 to 1xEVDO receiver measurement2 iDEN to WiDEN phone measurements

· · · · · · · ·

E6474A-315 E6474A-325 E6474A-340 E6474A-625 E6474A-635 E6474A-135 E6474A-136 E6474A-435

2. 1xEV-DO receiver measurements are available from the following Agilent receivers: E6450C, E6452C, E6454C and E6456C Refer to the Agilent E6474A 1xEV-DO Receiver Information Sheet (5989-2708EN) and CDMA Data Sheet (5988-6195EN) for measurement details. Each software order includes the following components: · CD with software and documentation (training and reference) · User's Guide (E6474-90052) · USB license key (initialized with licenses) Phone Scanning · Sagem BCCH scanning measurement software license

E6474A-201

4

Part 2: Platform Software Options

Select which E6474A platform software option matches your system needs.

License Description Option Number

Initialized parallel license Multiple phone license Indoor mapping license Client data measurement software license Server data measurement software license2 Wireless Application Measurement Software Video Streaming upgrade for WAMS (or WAMS Lite) Video Telephony upgrade for WAMS (or WAMS Lite) Video MOS upgrade for WAMS (or WAMS Lite) WAMS Lite3 TechTool data logging and GPS TechTool alarming capabilities Platform software CD only

Table 2 - Platform software options

key1

0051 010 030 700 7102 740 741 742 744 7453 070 071 090

1 The E6474A licenses are only delivered on a USB key. A parallel key must be ordered separately if required. Refer to the Software License section below for information on the Keyless License features. 2 E6474A-710 is a "server" application, used with E6474A-700, and requires to be run on a separate PC platform from the optimization software. E6474A-710 is provided with a CD containing software and documentation, a Server Installation Guide and a Parallel port software license key. Refer to the Wireless Data Measurements data sheet for further details (literature number 5988-1507EN). 3 WAMS Lite is available as a low cost entry point to basic service test sequencing. Tests included are FTP test, voice connectivity, video connectivity, AT commands, and DOS commands only. WAMS Lite is also a lower entry platform on which to add service test upgrades such as video telephony testing, video streaming and video MOS options. Example: To add Indoor mapping capability to your system select E6474A-030 Real time mapping capability is included with the platform. Keyless Software Licensing Server-based keyless software licensing is offered as an alternative to the default hardware key-based licensing. Software licensing provides the ability to maintain a pool of E6474A measurement licenses on a server and then distributes those licenses to client drive-test PCs using a check-out process. Typically only one server application is required per customer. This licensing option is aimed at customers managing more than twenty E6474A systems.

License Description Option Number

Software licensing server application Software licensing option delivery

Table 2a - Software license options

E6474A-081 E6474A-080

Note: The minimum check-out period is seven days. Techtool options are not available under the software licensing system.

5

Part 3: Post-Processing Options

Select which post-processing software you require.

License Description Option Number

Analysis Reporter Actix DV (GSM/GPRS) Actix DV EDGE upgrade on GSM/GPRS Actix DV GSM/GPRS/EDGE Actix DV UMTS upgrade on GSM/GPRS/EDGE Actix DV GSM/GPRS/EDGE/UMTS Actix DV HSDPA upgrade module Actix DV CDMA/cdma2000 Actix DV 1xEVDO upgrade on CDMA/cdma2000 Actix DV CDMA/cdma2000/1xEDVO Actix DV DSA Upgrade Actix DV Software Annual Maintenance Actix DV Customization Module Actix DV Voice MOS and Video test upgrades Actix DV TCP/IP/PPP Layer Visualization

Table 3 - Post-processing software options

E6474A-758 E5641A-100 E5642A-100 E5641A-200 E5642A-200 E5641A-300 E5642A-300 E5641A-400 E5642A-400 E5641A-500 E5642A-010 E5642A-050 E5641A-600 E5642A-500 E5642A-600

Example: To add Analysis Reporter capability to your system select E6474A-758. To add Actix DV with GSM/GPRS/EDGE capability to your system select E5641A-200. Note: Actix DV options are supplied on a separate CD and license options on a separate license key. An annual maintenance fee is payable on all Actix DV products providing telephone support and software updates. The first year's maintenance is included in the purchase price.

6

Part 4: Receiver Options

Select which receivers will best suite your system requirements. The receivers are listed by part number and by technology. Use either table to help you select the right receiver. Note: Receivers is assigned it's own product number. The receivers are not options of the E6474A system.

Receiver Part Number Description

E6450C* E6451C E6452C* E6453C E6454C* E6455C E6456C* E6457C E6458C E7456C

CDMA/TDMA PCS band digital receiver with internal GPS GSM 900MHz band receiver with internal GPS CDMA/TDMA Cellular band digital receiver with internal GPS Korea CDMA/GSM 1800 band digital receiver with internal GPS CDMA/GSM PCS band receiver at 1.9 GHz with internal GPS UMTS (W-CDMA)/cdma2000 IMT2000 band receiver at 2.1GHz (with internal GPS) UMTS(W-CDMA)/cdma2000 IMT2000 band receiver at 1.9GHz with internal GPS Japan cellular band digital receiver with internal GPS GSM 850 receiver at 850MHz with internal GPS iDEN receiver at 850MHz with internal GPS

Table 4a - Digital Receiver Part Numbers - listed by part number.

*

Support 1xEV-DO measurements when E6474A-136 (cdma2000 to 1xEV-DO receiver measurement license) is present.

Or select using:

Frequency Band (MHz) cdma One K-CDMA cdma 2000 GSM W-CDMA /UMTS iDEN TDMA

850 850 (Japan) 900 1800 1900 2100

E6452C E6457C E6453C E6450C or E6454C

E6458C E6451C E6453C E6456C E6454C E6456C E6455C E6455C

E7456C E6452C

E6450C

Table 4b - Digital Receiver part numbers - listed by technology.

7

Example: To order a GSM 850 MHz band receiver with internal GPS select E6458C Agilent receivers require related receiver measurement software as described in the Software Options section (refer to Table 1). The Agilent receivers include an internal GPS receiver but you can use an alternative external GPS unit if preferred. If you require dead reckoning with your GPS, you need to use an external GPS. Agilent offers an external GPS with dead reckoning capability (refer to Table 6) You need to select the receiver that covers the frequency band in which you want to make measurements. You need to order a measurement receiver per band required. If you are using multiple receivers in your system, only one GPS receiver is used for timing and location. Other GPS receivers are ignored. For example, if two receivers with internal GPS are connected, only one GPS from one of the receivers is used for data logging and recording. Each receiver includes the following components: Magnetic-mount RF antenna for the corresponding frequency band Indoor antenna kit for the corresponding frequency band TNC-N adaptor for RF antenna RS-232 cable for connection to PC Cable for connecting in multiple receiver configuration AC/DC power supply DC power cord - cigarette lighter type Mounting kit - brackets and screws for mounting receiver in a vehicle Receiver to direct connect hub interface cable Direct connect hub to second receiver power cable Receiver mounting plate Receiver mounting strap Appropriate frequency antenna (to be used with portable direct connect hub configuration) Antenna cable adaptor, N-male to sma-f

· · · · · · · · · · · · · ·

8

Part 5: Phone Options

Select which phone type you require for your system from the E6473B parts below. Alternatively source a supported phone directly from a third party; please refer to the agilent.com website or contact your Agilent representative for a list of supported phones.

Phone Descriptions Option Number

Sagem GSM 900/1800/1900 test mobile Sagem GPRS/GSM 900/1800/1900 test mobile Nokia 6230 (900/1800/1900) EDGE phone Nokia 6230 (850/1800/1900) EDGE phone Nokia UMTS/EDGE/GPRS (900/1800/1900, 2.1 GHz) phone Kyocera 3035 phone kit (US and China)

Table 5 - Engineering phone product options

E6473B-720 E6473B-740 E6473B-751 E6473B-752 E6473B-757 E6473B-770

Example: To order a Sagem GSM 900/1800/1900 test mobile select E473B-720 Note: These options include the manufacturers direct connect cables. They do not include the cables required to connect the phones to the E6473B Agilent high-speed hub. Where applicable the cable kits are listed in Table 6 on page 11-12. Nokia phone firmware flashes are available on either commercial phones or non_agilent flashed engineering phones as: Nokia 6230 EDGE firmware flash E5643A-100. Nokia 6650/7600 UMTS firmware flash E5643A-200. Upgrade to Agilent flashed phones are available as: Nokia 6230 EDGE firmware upgrade E5643A-110. Nokia 6630/6680 firmware upgrade E5643A-410 Phones are supplied with the manufacturers 1 year warranty, Agilent do not offer a time extension to this.

9

Part 6: Hardware Accessory Options

Select which hardware accessories you need with your system. Drive-test System Accessories - Refer to Agilent Direct Connect Hub Product Overview (5988-3176EN) for additional information. Agilent High Speed Direct Connect Hub Enables the simultaneous connection and powering of up to two phones (doing both trace and data) and two receivers (or two phones and one scanner) to the laptop PC. In-vehicle hub kit - Provides the accessories to allow for an in-vehicle configuration of the E6473B-015 Agilent high speed direct connect hub (to be ordered separately). Can hold any combination of two E6474A-015's or E6474A-03x's Direct Connect GPS DR w/Mag Mount Antenna External GPS device with dead reckoning that can connect to either the Agilent direct connect hub or directly to the laptop via serial port. This option includes a magnetic mount GPS antenna. Direct Connect GPS DR w/Perm Mount Antenna This option is the same as E6473B-030 but with a permanent mount GPS antenna.

E6473B-015

E6473B-021

E6473B-030

E6473B-031

10

Portable System Accessories Portable Carry Pack Hub Kit - Designed for portable use for phone only measurements. It includes a battery, a battery charger, a carrying case for the hub, and a USB cable. E6473B-015, direct connect hub, to be ordered separately. Including battery* and charger E6473B-022 Portable Single Receiver Backpack Hub Kit Used for configurations where one digital receiver is used to perform wireless measurements. It includes a battery, a battery charger, USB cable, and a backpack, which holds the hub and receiver. E6473B-015, direct connect hub, to be ordered separately. Including battery* and charger E6473B-023 Portable Dual Receiver Backpack Hub Kit Used for configurations where two digital receivers are used to perform wireless measurements. It includes a battery, a battery charger, USB cable, and a backpack, which holds the hub and two receivers. E6473B-015, direct connect hub, to be ordered separately. Including battery* and charger E6473B-024 * The battery is defined as a consumable part and is only covered by a 90 day warranty. It is not covered by the E6473B warranty and there is no optional warranty extension. Replacement batteries can be ordered as E6473-60008. Phone connection cables for use with the High Speed Direct Connect hub (E6473B-015) CDMA - QCP-820/1920/2700 Phone Cable Kit E6473B-801 CDMA - QCP-860/1960/2760 Phone Cable Kit E6473B-802 CDMA - QCP-860/1960/2760 Phone Cable Kit with RF E6473B-803 CDMA - Kyocera 2035/2135/3035/5475 Phone Cable Kit E6473B-805 Kyocera 2235 (data/trace) Phone Cable Kit with RF E6473B-810 Kyocera 2255 (data/trace) Phone Cable Kit with RF E6473B-811 Kyocera 2235/2255/2325/2345 Phone Cable Kit E6473B-812 Samsung A500 cable kit E6473B-816 Samsung N370/N181 cable kit E6473B-817 GSM/GPRS Sagem - OT-96M/OT-190/OT-199/OT-290 Phone Cable Kit E6473B-825 GSM - Sagem OT-76M/OT-160/OT-169/OT-260 Phone Cable Kit E6473B-827 Motorola GSM/GPRS T720 phone cable kit E6473B-829 TDMA - Nokia 5165/6120(I)/6160(I) Phone Cable Kit E6473B-830 CDMA - Sanyo SCP-4500 Phone Cable Kit E6473B-840 GAIT - Nokia 6340 Phone Cable Kit E6473B-850 iDEN - Motorola i1000+/i2000+ Phone Cable Kit E6473B-860 iDEN - Motorola i85s/i90c Phone Cable Kit E6473B-865 iDEN - Motorola i730/1830 phone cable kit E6473B-866 LGRD 2030 phone interface cable E6473B-867 K-CDMA - Samsung SCH-X120/SPH-X1200 Phone Cable Kit E6473B-871

11

Additional Phone Cables Powered Kyocera QCP2035 Phone cable Samsung SCH-x100 cdma2000 Phone Interconnect cable Cable for Motorola StarTAC TDMA phone Powered cable Motorola StarTAC TDMA phone Antenna kits 900/1800 Mhz Phone Antenna Kit 800/1900 MHz Phone Antenna Kit Receiver Antenna,Perm. Mt 800/1900MHz Receiver Antenna, Perm. Mt 900/1800MHz Receiver PCS antenna, magnetic mount Receiver Cellular antenna, magnetic mount Miscellaneous options Socket I/O dual serial port PCMCIA card 4-port USB to serial hub In-Vehicle phone cradle kit Multiple receiver interconnect kit Briefcase for phone/receiver + phone Receiver battery kit

Table 6 - Accessories

86154A-719 86154A-720 86154A-730 86154A-731 E6473B 898 E6473B 899 86156A-700 86156A-701 86154A-410 86154A-430 86154A-020 86154A-036 86154A-038 86154A-099 86154A-531 86154A-500

Example: To order a GSM/GPRS - Sagem OT-96M / OT-190 / OT-199/OT-290 Phone Cable Kit select E6473B-825

12

Part 7: Bundled System Kit Options

System Kit Description System kits are bundled systems combining common software and hardware components under a single option number at a discounted price. They are available for cdma2000, GSM850, GSM/GPRS and UMTS technology and consist of the following options:Software (E6474A): Phone/Receiver combo software license (option x2x), multi-phone (option 010), Indoor (option 030) and Analysis Reporter (option 758) Hardware (E6473B): - High speed hub (option 015), In-vehicle kit (option 021) and related cables (option 8xx). Kits do not include the receiver or phone hardware. System kits are configured under the E6474A product number, as detailed below:CDMA/ cdma2000 W-CDMA /UMTS GSM/ GPRS

Description

System Kits

Table 7- System Kit options

109

309

609

Example: To order a System Kit for cdma2000 technology select E6474A-109

Part 8: System Upgrade Options

Walkabout Upgrades There are a number of options to support the upgrade of obsoleted Walkabout equipment to the E6474A platform for connection to the Agilent high-speed direct connect hub. If you require to upgrade your Walkabout equipment select one of the following E6473B options.

Description Option Number

CDMA Walkabout Upgrade to E6474A/E6473B GSM Walkabout Upgrade to E6474A/E6473B TDMA Walkabout Upgrade to E6474A/E6473B iDEN Walkabout Upgrade to E6474A/E6473B

Table 8 - Walkabout upgrade options

E6473B-090 E6473B-091 E6473B-093 E6473B-094

Example: To order a iDEN Walkabout Upgrade to E6474A/E6473B select E6473B-094

13

· · · · · ·

Each Option includes: Scanner housing Scanner interconnect cable Portable USB hub kit Dongle with combo phone and scanner license for the specified technology Conversion instructions Box to return integrated controller back to the factory Note for Walkabout upgrades: Older scanners may need to have firmware upgrades. The firmware upgrade carries a minimal cost. Please contact the factory to determine if the firmware upgrade is required. If necessary, the scanner firmware upgrade option is: E6473B-K02 Firmware upgrade for Walkabout conversion "C" receiver upgrades Agilent E6450B or E6451A - E6454A receiver hardware can be upgraded to the Agilent E64xxC version receiver hardware for the same technology and bands. For example E6450B to E6450C (CDMA, PCS). The "C" receiver provides faster measurement capability and enhanced performance. The hardware upgrade is available with the following option: 86150C - "C" version receiver hardware upgrade Over-air maintenance test products, which use the Agilent receivers E6450B, E6453A, E6452A, E6452A #H02, or E6454A, can be upgraded to "C" receivers and cdma2000 software which will provide cdma2000 code domain power measurements using the following option: Note: This upgrade does not include conversion of a CDMA/TDMA receiver to a CDMA/UMTS receiver. 86157A - Over-air maintenance tool cdma2000 upgrade (This option includes the 86150C hardware upgrade and the E6474A-151 software upgrade). Upgrading and expanding E6474A systems The system includes software, receiver hardware, and accessories. Upgrading a system is similar to building a new system. You simply order those system elements that you do not currently have. To upgrade a system: Decide what system capability you want. Identify the capability you currently have. Choose the software options that you need to add. Choose the hardware options that you need to add. Choose the accessories that you need to add Upgrade from E74xxA platform with the following upgrade option which provides a CD containing the E6474A software application. E6474A-090: E74xx software upgrade to E6474A

1. 2. 3. 4. 5.

14

Part 9: Support and Training Options

The E6474A software licenses include the following product support options for the first year: · Agilent Call Center phone support, four hour response time or less. · Software updates. The Agilent Advantage Integrated Customer Care Program allows customers to upgrade to more comprehensive product support options. For the program summary and options, refer to publication 5988-4793EN. On-site training is orderable for E6474A and for WAMS. This provides: · Telephone assistance and Web training on specific topics · On-site training and start-up assistance Order as: E6474A One day on-site training - H7211B-209. WAMS One day on-site training - H7211B-232. E6474A and WAMS Two day on-site training - H7211B-233. On-site training is limited to some countries. Please contact your Agilent representative for further information. It is highly recommended that new E6474A and WAMS users order training options.

Part 10: Ordering examples

These examples are not a complete list of all possible configurations, they show typical configurations to illustrate the ordering process. CDMA ordering examples If you want a cdmaOne phone-based measurement system (single phone). Cable with external RF connection for QCP2760 phone. You will provide your own GPS, laptop and phone.

You need to order Quantity

E6474A: E6473B:

Wireless network optimization platform E6474A-100: cdmaOne phone measurement software license Accessories E6473B-803: QCP 860/1960/2760 phone interface cable with external RF connection E6473B-899: Phone antenna cable kit

1

1 1

If you want a cdmaOne combination phone and receiver-based measurement system for the PCS band. You need one receiver and multi-phone option, two cables for QCP 2760 with external RF connection and power up. In-vehicle use intended but with option for indoor use also. You provide your own Laptop PC.

You need to order Quantity

E6474A: Wireless network optimization platform E6474A-120: Combined cdmaOne phone- and receiver measurement software license E6474A-010: Multiple phone software license E6450C: CDMA/TDMA cellular band receiver at 1900MHz E6473B: Drive test accessories E6473B-015: Agilent high speed direct connect hub E6473B-021: In-vehicle Agilent high speed direct connect hub kit E6473B-023: Portable single receiver backpack hub kit E6473B-803: QCP 860/1960/2760 phone interface cable with external RF connection E6473B-899: Phone antenna cable kit

1 1 1 1 1 1 2 2

15

cdma2000 ordering example If you want a cdma2000 receiver-based measurement system for the PCS band. You will use the receiver GPS and provide your own laptop.

You need to order Quantity

E6474A:

Wireless network optimization platform E6474A-111: cdma2000 receiver measurement software license E6452A: CDMA/GSM PCS band receiver at 1.9GHz

1 1

GSM ordering examples If you want a GSM phone-based measurement system (up to four phones). Cables for four OT169 phones at 1900MHz with power up (desired in-vehicle use). You want Dead Reckoning GPS included with the system. You will provide your own laptop and test phones.

You need to order Quantity

E6474A:

E6473B:

Wireless network optimization platform E6474A-200: GSM phone measurement sw license E6474A-010: Multiple phone software license Accessories E6473B-015: Agilent high speed direct connect hub E6473B-021: In-vehicle Agilent high speed direct connect hub kit E6473B-827: Sagem OT76M/OT96M/OT160/OT169/OT260 phone interface voice cable E6473B-030: Direct Connect GPS DR with mag mnt antenna

1 1 1 1 4 1

GPRS Ordering Examples If you want a GPRS phone-based measurement system. Cables for two Sagem OT290 GSM/GPRS phones at 900/1800/1900 MHz with power up (desired in-vehicle use). You want two OT290 phones included with the system. You will provide your own laptop and GPS.

You need to order Quantity

E6474A:

E6473B:

Wireless network optimization platform E6474A-600: GSM phone measurement software license E6474A-010:Multiple phone software license Accessories E6473B-015: Agilent high speed direct connect hub E6473B-021: In-vehicle Agilent high speed direct connect hub kit E6473B-825: Sagem GPRS phone interface cable E6473B-740: Sagem GPRS 900/1800/1900 phone

1 1 1 1 2 2

16

If you want a GPRS combination phone and receiver-based measurement system for the 900/1800MHz band (single phone), with Data test capability. In-vehicle use intended with powered cable for the Sagem OT290M GPRS phone. Receiver, and phone hardware required. Wireless data measurement software required. You will supply both laptops for drive-test and for the test server.

You need to order Quantity

E6474A:

E6451C: E6453C: E6473B:

Wireless network optimization platform E6474A-620: Combined GSM phone- and receiverbased measurement sw license E6474A-700: Data measurement software license E6474A-710: Server data measurement software license GSM receiver at 900 MHz GSM receiver at 1800 MHz Accessories E6473B-015: Agilent high speed direct connect hub E6473B-021: In-vehicle Agilent high speed direct connect hub kit E6473B-825: Sagem GPRS phone interface cable E6473B-898: Phone antenna cable kit E6473B-740: GPRS 900/1800/1900 test mobile

1 1 1 1 1 1 1 1 1 1

W-CDMA (UMTS) Ordering Examples If you want a W-CDMA (UMTS) phone-based measurement system, with Data Measurement options. You will provide your own UMTS phone and laptop.

You need to order Quantity

E6474A:

Wireless network optimization platform E6474A-300: W-CDMA (UMTS) phone-based measurement software license E6474A-700: Data measurement sw license E6474A-710: Server data measurement software license

1 1 1

If you want a W-CDMA (UMTS) receiver and phone combination system (with multiRAT measurements for UMTS phone), you already own a UMTS receiver-based measurement license and hardware.

You need to order Quantity

E6474A:

Wireless network optimization platform E6474A-315: W-CDMA (UMTS) receiver to phone/ receiver combo measurement upgrade software license

1

17

iDEN ordering examples If you want a iDEN phone-based measurement system (single phone). Phone interface cable for iDEN i1000 plus phone. You will provide your own GPS and laptop.

You need to order Quantity

E6474A: E6473B:

Wireless network optimization platform E6474A-400: iDEN phone measurement software license Accessories E6473B-860: IDEN i1000 plus phone interface cable

1 1

If you want a iDEN combination phone and receiver-based measurement system (single phone). Phone interface cable i1000 plus phone (in-vehicle use intended).

You need to order Quantity

E6474A:

E7456C: E6473B:

Wireless network optimization platform E6474A-420: Combined iDEN phone- and scanner-based measurement software license iDEN receiver Accessories E6473B-015: Agilent high speed direct connect hub E6473B-021: In-vehicle Agilent high speed direct connect hub kit E6473B-860: iDEN i1000 plus phone interface cable

1 1 1 1 1 1

18

Notes

19

www.agilent.com/find/contactus

Additional Agilent literature Product Overviews Agilent E6474A Wireless Network Optimization Platform Product Overview Agilent Indoor Wireless Measurement Systems Product Overview Agilent Wireless Data Measurement Agilent Direct Connect Hub Data Sheets Agilent E6474A Wireless Network Optimization Platform for GSM and GPRS Agilent E6474A Wireless Network Optimization Platform for UMTS Agilent E6474A cdma2000 Wireless Network Optimization Platform Agilent Wireless Data Measurement

5988-3558EN

5968-8691E 5980-2310E 5988-3176EN

5988-5904EN

5988-8519EN

5988-6195EN 5988-1507EN

Product information subject to change without notice. © Agilent Technologies, Inc. 2005 Printed in UK. August 17, 2005 5988-2396EN

Information

5988-2396en.qxp

20 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

1051843