Read Microsoft Word - CV _Mariatti_ text version

Curriculum Vitae

1. Personal Record: Name : Ir. Assoc. Prof. Dr. Mariatti Jaafar @ Mustapha Sex : Female : Malaysian : Married School of Materials & Mineral Resources Eng.,USM Eng. Campus, 14300 Nibong Tebal, Penang, Malaysia Research Interest : Polymer Matrix Composites (PMC), Woven Thermoplastic Composites, Metal filled Polymer Composites, Polymer for electronic applications Date of Birth : 17.11.1972 Citizenship Marital Status

Present Position/address : Programme Chairman, Materials Engineering,

2. Education Record (College/ Universities attended and Qualifications/ Degrees obtained with dates):College/University a) Universiti Sains Malaysia (Materials Eng) (Second class upper) b) Universiti Sains Malaysia c) Royal Institute of Technology (KTH) Stockholm, Sweden d) Universiti Sains Malaysia Doctor of Philosophy (PhD) 2002 Masters in Science Degree of Licentiate 1999 2001 Qualification Bachelor in Engineering Date 1996

3. Working Experience (Detail of previous position with date)

Post 1997

Organization

Date

a) Auto Insertion Quality Engineer

Sony Audio (Malaysia) Sdn. Bhd. 1996-

4. Industrial linkaes Involved with industries such as Intel Technology, Penchem Industries Sdn. Bhd., etc.

5. Professional Membership Professional Engineer (Board Engineer Malaysia) Corporate Member (The Institution of Engineers Malaysia) Associate Member (Plastic & Rubber Institute of Malaysia) Ordinary Member (Institute of Materials Malaysia) Member (Electron Microscopy Society)

6. List of Research Projects:1.Studies on Metal filled Polymer Composites ­ Short Term Grant (Project Leader). Amount:RM 16,571 (Completed) 2. Low CTE Substrate to Improve Solder Joint Realibility ­ Intel Research Grant 2003/2004 (Project Leader). Amount: RM 90,000 (Completed) 3. Low CTE Substrate to Improve Solder Joint Realibility ­ Intel Research Grant 2004/2005 (Renewal) (Project Leader). Amount: RM 48,000 (Completed) 4. Development of Bioactive Glass-Ceramics/Polymer Composites for Bone-Graft ­ AUN/SEED-Net (Co-researcher). Amount: USD 3,784 (Completed) 5. Development of Bagasse Fiber Reinforced Polymer Composites- AUN/SEED-Net (Main-researcher). Amount: USD 1,970 (Completed)

6. Development of Woven Fabric Composites for Engineering Applications- IRPA EAR (Project Leader). Amount: RM 138,000.00 (In-progress) 7. Conductive Polymer Composites for Electronic Packaging- Intel Research Grant 2005/2006 (Project Leader). Amount: RM 30,000.00 (Completed) 8. Conductive Polymer Composites for Electronic Packaging- Intel Research Grant 2006/2007 (Project Leader). Amount: RM 37,000.00 (Completed) 9. Preparation of Bentonite Nanostructure and Properties of Polypropylene/Bentonite Nanocomposites by using In-Situ Grafting Melt-Intercalation Method­ USM Short Term Grant 2006-2007 (Project Leader). Amount: RM 17,880.00 (Completed) 9. Development of high performance composites materials from semiamorphous hybrid mineral filers from local resources for automotive industry ­ MOSTI Science Fund (2006-2008) (Co-researcher). Amount: RM 155,660.00 (Completed) 10. Utilization of paper sludge as filler in thermoset elastomer composites, ­ MOSTI Science Fund (2006-2008) (Co-researcher). Amount: RM 202,000.00 (Completed) 11. Polymer Composites for Thermal Interface Materials (TIM)- Intel Research Grant 2006/2007, under Center of Excellent Programme (CORT) (Co-researcher). Amount: RM 60,000.00 (In-progress) 12. British Council Travel Grant. Amount: £1450 (Completed) 13. Development of paper sludge-thermoplastic elastomer composites (TPEC) ­ Short Term Grant, Amount: RM 18,600.00 (co-researcher) (In-progress) 14. Development of PMMA bone cement for medical application- Science Fund 2007-2009, 2nd cycle . (Project Leader). Sept 2007August 2009. Amount:RM155,000.00 (Completed) 15. Fundamental study on percolation threshold of metal filled polymer composites ­ FRGS 2007 (Project Leadar) Dis 2007-Dis 2009. Amount: RM80,000.00 (Completed) 16. Optimization and Characterization of Biodegradable PLLA Polymeric Blends AUN/SEED-Net (Project leader). July 2007- July 2010. Amount: USD 17,100.00 (Inprogress) 17. Fabrication of carbon nanotubes filled polydimethylsiloxane (PDMS) composites and its behavior as Thermal Interface Materials (TIM) in electronic packaging ­ PMI (British Council).(Project Leader). March 2008-March 2010 Amount £25,788.00 (In-progress)

18. Study on the properties of Carbon Nanotubes (CNT) filled epoxy composites ­USM Short Term Grant (Project Leader). May 2008-May 2010. Amount RM 30,300.00 (Inprogress) 19. Fabrication of spin-coated epoxy/silica thin film composites- Intel Research Grant 2009/2010 (Project Leader). Sept 2009-Sept 2010. Amount: RM 54,900.00 (Inprogress) 20. Synthesis of metal nanoparticles and optimization on the electrical and thermal properties of metal nanoparticles filled epoxy composites- Research University Grant. August 2009-August 2011. Amount: RM 99,200.00 (In-progress) 21. Fabrication of spin-coated epoxy/silica thin film composites- Intel Research Grant 2010/2011 (Project Leader). Sept. 2010-Sept. 2011. Amount: RM 36,000.00 (Inprogress) 22. Development and properties of transparent, conductive and flexible films (TCFs) using silver nanowire/epoxy composites. AUN/SEED-Net (Project leader). July 2010July 2012. Amount: USD 3500 (In-progress)

6. Teaching EBB 113/3 Materials Engineering EBB 324/4 Advance Materials & Composites EBB 250/2 Computer Method for Engineer EBB 220/3 Polymer Engineering EBB 204/2 Laboratory (Materials Properties) EBB 317/2 Laboratory (Materials Processing) EBB 334/4 Mechanical Metallurgy EBB 325/2 Laboratory (Microscopy) EBB 154/2 Laboratory (Materials 1) EBB 427/3 Polymer processing and application EBB 405/3 Non-destructive Testing EBB 401/6 Final Year Project

EBB 555/23 Research Project (Master Mix-Modes) EBB 524 Electronic Packaging EBB 526 Composite Materials

7. Postgraduate research students under supervision (including candidates who have completed) 1. Tan Theng Pei- Studies on the Properties of Polymer Adhesives for Electronic Encapsulation (Master by Mix-Mode - completed) 2. Lai Yin Men- Development of Molded Underfill Materials for Lead-Free Soldered Flip Chip Applications (Master by Mix-Mode -completed) 3. Saupi Mohamed Noor- Studies on the properties of woven thermoset composites-Using vacuum Bagging System (Master by Mix-Mode completed) 4. Azlin Fazlina Osman- Studies on the properties of Aluminum filled polypropylene Composites (Master by Mix-Mode -completed) 5. Tee Dee In- Studies on the properties of silver nanoparticles filled epoxy composites for the application of electrically conductive adhesives (ECA) for electronic applications (Master by Mix-Mode -completed) 6. Farah Noor ­ Studies on various shape of mineral silica filler on the properties of epoxy composites for electronic applications (Master by MixMode -completed) 7. Cheng Pek Say ­ A preliminary study on the properties of adhesive for miniature microphone process (Master by Mix-Mode -completed) 8. Nurazreena Ahmad- Studies on the properties of Metal filled Polymer Composites ­ Co-supervisor (Masters by research - Completed) 9. Le Pham Ngoc Quynh ­ Development of Bioactive Glass Ceramics - Cosupervisor (Masters by research - Completed)

10. Nadras Othman- Bentonite Filled Polyproplene Composites ­ Cosupervisor (PhD- completed) 11. Teh Pei Ling- Development of core layer materials in organic substrate to improve thermal mismatch properties - Main Supervisor (PhD- completed) 12. Mohd. Anuar Junoh- Studies on the properties of conductive particulate filled Rubber Composites ­ Main supervisor (Master by Researchcompleted) 13. Lai Wai Lam- The properties of woven Pinang and kenaf fiber reinforced polyester composites (Master by Mix-Mode -completed) 14. Lok Chai Ling- Preliminary studies on the properties of PMMA bone cement and bioactive glass ceramic filled OMMA bone cement composites (Master by Mix-Mode -completed) 15. Vilay Vanalaysassy- Development of Bagasse Fiber Reinforced Polymer Composites ­ Main supervisor (Master by research- Completed) 16. Muhammad Jannah- Woven Fabric Composites for Engineering Applications ­ Main supervisor (Master by research- Completed) 17. Mohd Hafiz Abdul Halim-Studies on the properties of particulate fillers filled epoxy composites for electronic applications- (Master by Mix-Mode completed) 18. Yamuna- Preparation and characterization of Ethylene Vinyl Acetate (EVA)/Natural Rubber (SMRL)/Organoclay Nanocomposites-Cosupervisor (PhD- completed) 19. Hakimah Osman ­ Characterization and properties of recycled newspaper (RNP) filled polypropylene (PP)/natural rubber (NR) composites -Cosupervisor (PhD- completed) 20. Nurdina A. Kadir ­ Studies on mineral fillers filled polypropylene composites- Main supervisor (Master by research- completed)

21. Chan Khai Loon- Studies on the properties of copper and silver nanoparticle filled epoxy composites for the application of electrically conductive adhesives (ECA) in electronic packaging - Main supervisor (Master by research- completed) 22. Chua Tze Peng- Studies on the effect of carbon Nanotubes (CNT) in silicon rubber as Thermal Interface Materials - Main supervisor (Master by research- completed) 23. Yusriah Lazim- Properties of Woven Fabric Reinforced Polymer Composites Using Natural and Synthetic Fiber­ Main supervisor (Master by research- completed) 24. Nurul Hidayah Ismail- Study on the properties of Aluminium and silver filled HDPE composites (Master by Mix-Mode -completed) 25. Suriati Ghazali- Synthesis of silver (Ag) nanoparticle, experimental and numerical studies of silver filled epoxy composites for electronic applications ­ Main supervisor (PhD- on-going) 26. Nurkhairunisa Mazlan ­ Carbon nano tube for Thermal Interface Materials -Co-supervisor (PhD- on-going) 27. Noor Mazni Ismail - Composite materials for Thermal Interface Materials (PhD- on-going) 28. Rafiza Ramli- Polysiloxane Project -Co-supervisor (PhD- on-going) 29. Zaiza Zainul- Synthesis of copper nanoparticles and copper nanoparticles filled epoxy composites. ­ Main supervisor (PhD- on-going) 30. Vilay Vannaladsaysy. Optimization and characterization of biodegradable PLLA Polymer blends. ­ Main supervisor (PhD- on-going) 31. Zulkarnain- Prediction of percolation threshold of metal filler filled polymer composites- -Co-supervisor (PhD- on-going) 32. Hamizah A. Samad- Bioactive glass ceramic filled PMMA compositesMain supervisor (Master by research- on-going)

33. Khairul Anuar Shariff- Studies on the processing and properties of conductive polymer composites for electronic applications (Master by research- on-going) 34. Saw Lian Na- Properties of CNT filled polymer composites (Master by research- on-going) 35. Kenneth Kong Thean Soon- Processing and properties of multi wall carbon Nanotubes (CNT) filled silicon rubber as Thermal Interface Materials. Main supervisor (Master by research- on-going) 36. Foo Yin Lin Evon- Fabrication and Properties of Epoxy/Silica Thin Film Composites (Master by research- on-going) 37. Patrick Lim Wye Kheong- Halogen Free Core Material with Various Flame Retardant Additives (Master by research- on-going) 38. Kong Siew Mui- Fabrication and Properties of Epoxy/Carbon Nanotubes (CNT) Thin Film Composites (Master by research- on-going) 39. Muhammad Jannah Jusoh- Studies on Various Types of Antimicrobial Filler Filled Polyethelene (PE) Nano Composites (PhD- on-going) 40. Chou Pui May- Effect of Various Additives on PLLA Blend (Master by research- on-going) 41. Ratnamalar A/P Rajasingam, Synthesis and properties of Magnisium oxide/Polyaniline core shell nanocomposites (PhD-on-going) 42. Nurul Izzati Mohd Shukri. Studies on the properties of CNT filled epoxy composites produce by electrospinning method (Master by research- ongoing) 43. Richard Voo Tin Vui. Fabrication and properties of thin film composites (Master by research- on-going)

7. Publications (State all papers published) a) International Journals

1) M. Mariatti, M. Nasir & H. Ismail (2000). Effect of sample cutting direction on mechanical properties of woven thermoplastic prepreg. Polymer Testing, 19(6): 617-624 2) M. Mariatti, M. Nasir & H. Ismail (2000). Influence of types of towpreg (Number of tow and matrices) in woven thermoplastic composites-Part 1. Intern. J. Polymeric Mater, 47: 487-498 3) M. Mariatti, M. Nasir & H. Ismail (2000). Influence of different woven geometry and ply effect in woven thermoplastic composites behavior-Part 2. Intern. J. Polymeric Mater, 47: 499-512 4) M. Mariatti, M. Nasir & H. Ismail (2001). Effect of samples cutting position and gage length or specimen geometry on the mechanical properties of woven thermoplastic prepreg. Intern. J. Polymeric Mater. 49: 259-270 5) M. Mariatti, M. Nasir & H. Ismail (2001). The effect of hole locations and hole sizes on damaged behavior of woven thermoplastic composites. Polymer Testing. 20: 179-189 6) M. Mariatti, M. Nasir & H. Ismail (2001). The flexural behavior of woven prepreg thermoplastic composites. Journal of Thermoplastic Composite Materials. Vol 14 7) M. Mariatti, M. Nasir & H. Ismail (2002). Effect of prepreg geometry on the prepreg and plain weave composite properties. Journal of Reinforced Plastics and Composites. 21 (8): 711-723 8) M. Mariatti, M. Nasir & H. Ismail (2002). Determination of the influence of stacking structure, float length and pressure time on the flexural properties of satin laminated composite using a factorial design. Polymer Testing. 21: 807814 9) M. Mariatti, M. Nasir & H. Ismail (2003). Effect of stacking sequence on the properties of plain-satin hybrid laminate composites. Polymer-Plastic Technology and Engineering. 42(1): 65-79

10) M. Mariatti, M. Nasir & H. Ismail (2003). The effect of stacking structure on the properties of satin laminated composites. Journal of Thermoplastic Composite Materials. 16 (4): 303-315 11) M. Mariatti, J. Backlund, M. Nasir & H. Ismail (2004). Effect of hole drilling techniques on tensile properties of continuous fiber impregnated thermoplastic (COFIT) plain weave composites. Journal of Reinforced Plastics and Composite. Vol. 23 (11): 1173-1186. 12) N. Othman, H.Ismail and M. Jaafar (2004). Preliminary study of Bentonite as a filler in Polypropylene composites. Polymer-Plastics Technology and Engineering. Vol. 43, No. 3: 713-730. 13) M. Mariatti & P. K. Chum (2005). Effect of Resin: Fiber ratio on the Properties of Class Fiber Reinforced Plastic Composites. Intern. J. Polymeric Mate. 54: 1-10 (Taylor & Francis) 14) M. Mariatti & P. K. Chum (2005). Effect of Laminate Configuration on the properties of Glass Fiber Reinforced Plastic (GFRPs) Mixed Composites. Journal of Reinforced Plastic Composites. Vol. 24:16,1713-1722 (SAGE Publications) 15) Nurazreena, Luay Bakir Hussain, H. Ismail, M. Mariatti (2006). Metal filled High Density Polyetheylene Composites- Electrical and Tensile Properties. Journal of Thermoplastic Composite Material. Vol. 19, No. 4, 413-425 (SAGE Publications) 16) Nadras Othman, H. Ismail & M. Mariatti (2006), Effect of Compatibilisers on Mechanical and Thermal Properties of Bentonite Filled Polypropylene Composites. Polymer Degradation and Stability. 91, 1761-1774 (Elsevier) 17) A. F. Othman & M. Mariatti (2006) Properties of Aluminum Filled Polypropylene Composites. Polymers & Polymer Composites. Vol 14, No 6, 623-633 (RAPRA Publication) 18) K. M. Eng, M. Mariatti, A.N.R Wagiman, K.S. Beh (2006) Effect of Different Woven Linear Density on the Properties of Polymer Composites. Journal of Reinforced Plastic Composites. 25, 1375-1383

19) P.L. Teh, M. Mariatti, H.M. Akil, C.K. Yeoh, K.N. Seetharamu, A.N.R. Wagiman and K.S. Beh. (2007) The properties of epoxy resin coated silica fillers composites. Short Communication. Materials Letters, Volume 61, Issues 11-12, Pages 2156-2158 20) J. Anuar, M. Mariatti, H. Ismail. (2007) The properties of aluminium and zinc filled natural rubber composites. Polymer-Plastics Technology and Engineering, 46: 667-674 21) D. I. Tee, M. Mariatti, A. Azizan, C. H. See & K. F. Chong, (2007) Effect of Silane-based coupling agent on the properties of silver nanoparticles filled epoxy composites. Composites Science & Technology 67, 2584-2591 (2.171) 22) P.L. Teh, M. Mariatti, K.N. Seetharamu, A.N.R. Wagiman and K.S. Beh. (2008). The effect of curing agent on the properties of mineral silica filled epoxy composites, Polymer Composites, Volume 29 Issue 1, 27-36 (1.058) 23) J. Anuar, M. Mariatti, H. Ismail. (2007). Study on tensile, electrical and thermal properties of aluminium particles filled natural rubber (NR) and ethylene-propylene-diene terpolymer (EPDM) composites, Polymer-Plastics Technology and Engineering, 46(2007) 1201-1206. 24) P.L. Teh, M. Mariatti, H.M. Akil, K.N. Seetharamu, A.N.R. Wagiman and K.S. Beh (2008). Effect of Ethanol as diluent on the properties of mineral silica filled epoxy composites. Journal of Composite Materials, 42: 129-142 (0.957) 25) V. Vilay, M. Mariatti, R. Mat Taib and Mitsugu Todo. Effect of fiber surface treatment and fiber loading on the properties of bagasse fiber-reinforced unsaturated polyester composites. Composites Science and Technology, Volume 68, Issues 3-4, March 2008, Pages 631-638 (2.171) 26) Farrah Noor Ahmad, Mariatti Jaafar, Samayamutthirian Palaniandy and Khairun Azizi Mohd Azizli, Effect of particle shape of silica mineral on the properties of epoxy composites. Composites Science and Technology, Volume 68, Issue 2, February 2008, Pages 346-353 (2.171)

27) P.L. Teh, M. Mariatti, H.M. Akil, K.N. Seetharamu, A.N.R. Wagiman and K.S. Beh (2008). Thermal and mechanical properties of particulate fillers filled epoxy composites for electronic packaging application, Polym. Adv. Technol, 19: 308-315 (1.504) 28) Samayamutthirian Palaniandy, Khairun Azizi Mohd Azizli, Mariatti Jaafar, Farrah Noor Ahmad, Hashim Hussin and Syed Fuad Saiyid Hashim. Effect of structural changes of silica filler on the coefficient of thermal expansion (CTE) of underfill encapsulant. Powder Technology, Volume 185, Issue 1, 10 June 2008, Pages 54-57 29) S.C. Lee and M. Mariatti, The effect of bagasse fibers obtained (from rind and pith component) on the properties of unsaturated polyester composites Materials Letters, Volume 62, Issue 15, 31 May 2008, Pages 2253-2256 (1.625) 30) W.L. Lai & M. Mariatti, The properties of woven betel palm (areca catechu) reinforced polyester composites, Journal of Reinforced Plastics & Composites, 2008. Volume 27, Number 9, 925-936 (0.417) 31) M. Jannah, M. Mariatti, A. Abu Bakar, Abdul Khalil H. P. S. (2009) Effect of chemical surface modifications on the properties of woven banana reinforced unsaturated polyester composites, Journal of Reinforced Plastics & Composites, Vol. 28, No. 12, 1519-1532. (0.573) 32) M. Jannah, M. Mariatti, A. Abu Bakar, Abdul Khalil H. P. S. (2008), Properties of banana and pandanus woven fabric reinforced unsaturated polyester composites, Journal of Composite Materials, Volume 42, Number 9, 931-941 (0.957) 33) W.L. Lai, M. Mariatti, Jani S. (2008), The properties of woven kenaf and betel palm (areca catechu) reinforced unsaturated polyester composites, Polymer-Plastics Technology and Engineering, 47:1193-1199 (0.342) 34) Nurdina Abd. Kadir, M. Mariatti, Samayamutthirian Palaniandy (2009) Effect of Single-Mineral Filler and Hybrid-Mineral Filler Additives on the Properties of Polypropylene Composites, Journal of Vinyl and Additive Technology, Volume 15 Issue 1, 20-28 (0.685)

35) T. P. Chua, M. Mariatti, Azizan Aziz, Azura A. Rashid (2009). Covalent Sidewall Functionalization of Multi-walled Carbon Nanotubes via Electron Reduction of Benzophennone by Potassium Metal, Journal Alloy and Compound 480, 534-536 (1.501). 36) L. S. Tang & M. Mariatti, Comparison on the properties of nickel coated graphite (NCG) and graphite particles as conductive fillers in polypropylene (PP) composites, Polymer-Plastics Technology and Engineering, Volume 48 Issue 6, 614-620 (2009) (0.456). 37) Hamizah A. Samad & M. Mariatti, (2009). Effect of polymethyl methacrylate (PMMA) powder to liquid monomer (p/l) ratio and powder molecular weight on the properties of PMMA cement, Polymer-Plastics Technology and Engineering, Volume 48, Issue 5, pages 554 - 560. (0.456). 38) Vilay Vannaladsaysy, Mitsugu Todo, Tetsuo Takayama, M. Mariatti, Zulkifli Ahmad, Korakanh Pasomsouk (2009) Effect of lysine triisocyanate on the mode I fracture behavior of polymer blend of poly(L-lactic acid) and poly (butylene succinate-co-L-lactate), Journal of Materials Science, Volume 44, Number 11, 3006-3009 (1.181) 39) Samayamutthirian Palaniandy, Nurdina Abd Kadir, Mariatti Jaafar (2009) Value adding limestone to filler grade through an ultra-fine grinding process in jet mill for use in plastic industries. Minerals Engineering, Volume 22, Issues 7-8,695-703 40) Y. Munusamy, H. Ismail, M. Mariatti & C. T. Ratnam (2009) Effect of electron beam irradiation on the properties of ethylene-(vinyl acetate) copolymer/natural rubber/ organoclay nanocomposites, Journal of Vinyl and Additive Technology 15 (1), pp. 39-46 41) Y. Munusamy, H. Ismail, M. Mariatti & C. T. Ratnam (2008). EthyleneVinyl acetate/natural rubber/ organoclay nanocomposites: Effect of sulfur and peroxide vulcanization, Journal of Reinforced Plastics and Composites 27 (16-17), pp. 1925-1945 42) Azura A. R. Suriati Ghazali, M.Mariatti (2008) Effects of the filler loading and aging time on the mechanical and electrical conductivity properties of

carbon black filled natural rubber , Journal of Applied Polymer Science 110 (2), pp. 747-752 43) Ismail, H. Osman H. & M. Mariatti (2008). Effects of natural weathering on properties of recycled newspaper-filled polypropylene (PP)/Natural rubber (NR) composites , Polymer - Plastics Technology and Engineering 47 (7), pp. 697-707 44) Ismail, H. Osman H. & M. Mariatti (2008). The effect of recycled newspaper content and size on the properties of polypropylene (PP)/natural rubber (NR) composites, Polymer - Plastics Technology and Engineering 47 (1), pp. 2329. 45) Vilay Vannaladsaysy, Mitsugu Todo, Tetsuo Takayama, M. Mariatti, Zulkifli Ahmad, Korakanh Pasomsouk (2009). Characterization of the Mechanical and Thermal Properties and Morphological Behavior of Biodegradable Poly(L-lactide)/Poly(epsilon-caprolactone) and Poly(L-lactide)/Poly(butylene succinate-co-L-lactate) Polymeric Blends Journal of Applied Polymer Science, 114, 1784-1792 (2009) (1.187). 46) Y. Munusamy, H. Ismail, M. Mariatti & C. T. Ratnam (2009). Effect of Electron Beam Irradiation on the Properties of Ethylene-(vinyl acetate) Copolymer/Natural Rubber/Organoclay Nanocomposites. JOURNAL OF VINYL & ADDITIVE TECHNOLOGY. Volume: 15 Issue: 1 Pages: 39-46. 47) H. Ismail, Y. Munusamy, M. Mariatti & C. T. Ratnam (2010). The effect of trimethylol propane tetraacrylate (TMPTA) and organoclay loading on the properties of electronbeam irradiated ethylene vinyl acetate (EVA)/naturalrubber (SMR L)/organoclay nanocomposites, Journal of Applied Polymer Science, 117 (2), pp. 865-874 48) Osman H., Ismail, H. & M. Mariatti (2008). Comparison of reinforcing efficiency between recycled newspaper (RNP)/Carbon Black (CB) and Recycled Newspaper (RNP)/Silica Hybrid Filled Polypropylene (PP)/Natural Rubber (NR) composites, Journal of Reinforced Plastics and Composites, 29 (1), pp. 60-75

49) Chan K.L., Mariatti M., Lockman Z., Sim L.C., Effect of Ultrasonication Medium on the Properties of Copper Nanoparticle-filled Epoxy Composite for Electrical Conductive Adhesive (ECA) Application, Journal of Materials Science: Materials in Electronics, Volume 21, Issue 8 (2010), Page 772 (1.054) 50) Yusriah L., M. Mariatti, A. A. Bakar, Specific Properties of Particulate Fillers /Woven Glass Fabric Filled Vinyl Ester Epoxy Composites, Journal of Vinyl & Additive Technology, 16 (1), pp. 98-104 (0.317) 51) Vannaladsaysy, Vilay; TODO, Mitsugu; Jaafar, Mariatti; Ahmad, Zulkifli, Characterization of Microstructure and Mechanical Properties of Biodegradable Polymer Blends of Poly(L-lactic acid) and Poly(butylene succinate-co--caprolactone) with Lysine triisocyanate. Polymer Engineering & Science. DOI 10.1002/pen.21683 (1.245) 52) Vilay Vannaladsaysy, Mitsugu Todo, Tetsuo Takayama, M. Mariatti, Zulkifli Ahmad, Korakanh Pasomsouk, Effect of PEO-PPO-PEO Copolymer on the Mechanical and Thermal Properties and Morphological Behavior of Biodegradable Poly (L-lactic acid) (PLLA) and Poly (Butylene Succinate-coL-Lactate) (PBSL) Blends, 10.1002/pat.1672 53) T. P. Chua, M. Mariatti, Azizan Aziz, Azura A. Rashid (2010). The effect of surface functionalized multi-walled carbon nanotubes on the properties of poly(dimethyl siloxane) nanocomposites, Composite Science and Technology, 70 (4), pp. 671-677 (2.533). 54) Vilay Vannaladsaysy, , M. Mariatti, Mitsugu Todo, Zulkifli Ahmad, Korakanh Pasomsouk, Improvement of microstructures and properties of biodegradable PLLA and PCL blends compatibilized with a triblock copolymer, Materials Engineering Part A. 527 (2010) 6930­6937. 55) Chou P.M. & Mariatti M. (2010) Properties of polymethyl methacrylate (PMMA) bone cement filled with titania and hydroxyapatite fillers, Polymer Plastics Technology and Engineering, Volume 49 Issue 12, 1163 Polymers for Advanced Technologies. DOI:

56) Yusriah L., M. Mariatti, A. A. Bakar, (2010) The Properties of Vinyl Ester Composites Reinforced Woven Fabrics and Hollow Phenolic Microspheres, Journal of Reinforced Plastics and Composites. Volume 29 Issue 20. (0.763) 57) Suriati Ghazali, M.Mariatti & Azizan Aziz, Effects of filler shape and size on the properties of silver filled epoxy composite for electronic applications, Journal of Materials Science: Materials in Electronics, 22 (1), pp. 56-63 (1.054) 58) V. Vilay, M. Mariatti, Z. Ahmad, K. Pasomsouk, and M. Todo, Improvement of Microstructure and Fractured Property of Poly(L-lactic acid) and Poly(butylene 307 59) Chan K.L., Mariatti M., Lockman Z., Sim L.C.,The Effects of Size and Filler Loading on the Properties of Copper and Silver Nanoparticle-filled Epoxy Composites., Journal of Applied Polymer Science (in press). 60) S. Khairul Anuar, M. Mariatti, A.Azizan, N.Chee Mang, W.T. Tham, Effect of different types of silver and epoxy systems on the properties of silver/epoxy conductive adhesives, Journal of Materials Science: Materials in Electronics, DOI : 10.1007/s10854-010-0207-7. 61) Nurdina Abd. Kadir, M. Mariatti, Samayamutthirian Palaniandy Effect of Filler Surface Treatment on Mechanical Properties and Thermal Properties of Single and Hybrid Filler-Filled PP Composites, Journal of Applied Polymer Science, 120 (2), pp. 857-865. 62) Voo, T.V., Mariatti, M., Sim, L.C., Tensile and thermal conductivity properties of epoxy nanocomposites thin film by spin coating technique, Key Engineering Materials 471-472, pp. 1118-1123 (Scopus) succinate-co-e-caprolactone) Blend Compatibilized with Lysine Triisocyanate, Engineering Letters, Volume 18 Issue 3, Pages 303-

b) Local Journal

1) M. Mariatti, A. Y. Amir, H. Md. Akil, A.N.R. Wagiman & K.S. Beh, Low CTE and high flexural laminated woven glass fabric and silica filled thermoset composites for substrate materials in electronic packaging, Malaysian Journal of Microscopy, Volume 2, 2005. 108-115. 2) J. Anuar, M. Mariatti, H. Ismail, Tensile properties, electrical resistivity and morphological observation of aluminium fillers filled natural rubber (nr) and ethylene-propylene-diene terpolymer (epdm) composites, Malaysian Journal of Microscopy. Volume 3 (2007) 3) F.N. Ahmad, M. Mariatti, Samayamutthirian Palaniandy and Khairun Azizi Mohd Azizli, Studies on Various Shape of Mineral Silica Fillers and Loading on The Properties of Epoxy Composites. Malaysian Journal of Microscopy. Volume 3. (2007) 4) A.R. Azura, G.Suriati and M. Mariatti, Effect of filler loading on mechanical and conductivity properties of carbon black filled natural rubber composites, Malaysian Journal of Microscopy, Vol 3 5) P. L. Teh, M. Mariatti, H. Md. Akil & A.N.R. Wagiman, Properties of epoxy coated cordierite filler composites, Malaysian Journal of Microscopy, 4 (1), pp. 122-128 (2010) 6) Nurdina Abd. Kadir, M. Mariatti, Samayamutthirian Palaniandy, Mechanical properties and morphology of calcium carbonate and mica filled polypropylene composites, Malaysian Journal of Microscopy, Vol 5. 113-118 (2009) 7) H. Ismail, Y. Munusamy, M. Mariatti & C. T. Ratnam (2010). The effect of organoclay dispersion on the thermal stability and flammability of ethylene vinyl acetate (EVA)/natural rubber (SMR L)/organoclay nanocomposite: A microscopy approach, Malaysian Journal of Microscopy 4 (1), pp. 116-121 8) Vilay, V., Mariatti, M., Ahmad, Z., Todo, M.,(2010) Pasomsouk, K.Fabrication and characterization of macroporous poly(L-lactide) scaffolds by solid-liquid phase separation and freez-drying techniques, Malaysian Journal of Microscopy 6 (1), pp. 64-68

c) Records of papers presented at conferences/ Seminars/ Colloquium 1) M. Mariatti, M. Nasir and H. Ismail. `Preliminary studies of woven thermoplastic composites'. International Rubber Conferences, Kuala Lumpur, 6-9 Oct 1997 2) M. Nasir, H. Ismail, M. Mariatti & E. L. Heng. `Damaged behaviors of woven laminated thermoplastic composites'. The First Asian-Australasian Cconference on Composite Materials, Japan, 7-9 Oct 1998 3) M. Mariatti, M. Nasir and H. Ismail. `Damage behavior of woven thermoplastic composites'. Seminar on Polymeric Materials '99, 27th August 1999, Conference Hall, School of Industrial Technology, USM, Malaysia 4) M. Mariatti, M. Nasir and H. Ismail. `Flexural behavior of woven thermoplastic composite'. Symposium on Polymeric Materials 2000, 1-2 June 2000, Conference Hall, School of Industrial Technology, USM, Malaysia 5) M. Mariatti, M. Nasir and H. Ismail. `The properties of different prepreg geometry'. First Colloquium on Post Graduate Research 2000, 25th November 2000, Ipoh, Perak, Malaysia 6) M. Mariatti, J. Backlund, M. Nasir and H. Ismail. `Effect of hole drilling technique and cutting speeds on tensile properties of COFIT woven system'. Presented in Licentiate Thesis Examination, Royal Institute of Technology (KTH), 30 th May 2001, Stockholm, Sweden 7) M. Mariatti, M. Nasir and H. Ismail. `Effect of Stacking Structure on The Properties of Satin Laminated Composites'. National Symposium on Polymeric Materials 2001, 2-3 October 2001, Shah Alam, Selangor, Malaysia

8) M. Mariatti, M. Nasir & H. Ismail (2002). Water Absorption Studies of Woven Thermoplastic Composites, With and Without Hole. Post Graduate Research Paper 2001/2002. 97-99 9) M. Mariatti and Tan Theng Pei. `Studies on The Properties of Polymer Adhesives for Electronic Encapsulant' 3rd International Conference on Recent Advances in Minerals, Minerals and Environment (RAMM 2003), 2003. 5-7th May 2003. Penang, Malaysia 10) N. Othman, H. Ismail and M. Mariatti, `Application of Bentonite as a filler in Polypropylene; Effect of filler loading on mechanical and morphological properties' 3rd International Conference on Recent Advances in Minerals, 11) N. Othman, H. Ismail and M. Mariatti, `The Effect of Bentonite as filler on Mechanical and Morphological Properties of Polypropylene Composites. 12th Scientific Conference and 13th Annual General Meeting Electron Microscopy Society of Malaysia , 2003. 15th -17th December 2003. Langkawi, Malaysia 12) N. Othman, H. Ismail and M. Mariatti, `The Effect of Polypropylene Maleic Anhydride on the Properties of Bentonite Filled Polypropylene Composites. 12th Scientific Conference and 13th Annual General Meeting Electron Microscopy Society of Malaysia , 2003. 15th -17th December 2003. Langkawi, Malaysia 13) M. Mariatti, Nurazleena, Luay Bakir Hussin & H.Ismail, `Electrical and Tensile Properties of Metal Filled High Density Polyethylene Composites'. 4th International Materials Technology Conference & Exhibition (IMTCE 2004), 23-25th March 2004, Kuala Lumpur, Malaysia. 14) Teh Pei Leng, M. Mariatti, Hazizan Md. Akil, Amir Wagiman `Thermal Properties Epoxy of Fused 6th silica International and Glass Powder on Filled Resin'.

Conference

Electronic

Materials and Packaging, 5-7 December 2004, Penang, Malaysia. 15) P. L. Teh, M. Mariatti, S. M. Noor, H. M. Akil, A. N. R. Wagiman & K. S. Beh,' Flexural and Thermal Expansion Properties of E-Glass Woven Fiber/Glass Powder Filled Epoxy Resin'. 21st Century COE Workshop On

Regional Networking For Materials Engineering And Green Energy" 7th - 10th August 2005, Penang. Malaysia. 28 16) P. L. Teh, M. Mariatti, H. M. Akil, K. N. Seetharamu, A. N. R. Wagiman & K. S. Beh Thermal Expansion and Flexural Properties of Particulate Fillers Filled Epoxy Composites. National Symposium on Polymeric Materials 2005. 23-24 August 2005. Selangor. 8 pages. 17) J. Anuar, H.Ismail & M. Mariatti, Study on Curing Characteristics, Mechanical Properties and Morphology of Aluminium and Zinc in Natural Rubber (NR) Composites. Proceeding 14th Scientific & 15th Annual General Meeting of Electron Microscopy Society of Malaysia, 5-7th December 2005. 18) A. Y. Amir, H. Md. Akil, M. Mariatti, A.N.R. Wagiman & K.S. Beh, Low CTE and High Flexural Laminated Woven Glass Fabric Thermoset Composites for Substrate Material in Electronic Packaging Application, Proceeding 14th Scientific & 15th Annual General Meeting of Electron Microscopy Society of Malaysia, 5-7th December 2005. 19) N. Othman, H. Ismail & M. Mariatti, Effect of POFA on Processing and Thermal Stability of Bentonite Filled Polypropylene Composites, The XXII Regional Conference on Solid State Science & Technology 2005, 18-21 December 2005. 20) V. Vilay, M. Mariatti, R. Mat Taib, Wan Asma, K. Phasomsouk, Mitsugu Todo, The effect of two fiber extraction methods on the properties of bagasse fiber-reinforced polyester composites, National Symposium of Polymeric Materials 2006, Petaling Jaya, 12-14 Disember 2006 21) P.L. Teh, M. Mariatti, H.M. Akil, K.N. Seetharamu, A.N.R Wagiman, K.S. Beh, High Filled Epoxy Composites for Electronic Packaging Application, Proceedings of the IEEE/CPMT International Electronics Manufacturing Technology (IEMT) Symposium, art. no. 4456466, pp. 275-281 22) D. I. Tee, M. Mariatti , C. H. See , K. F. Chong, Study on the Electrical Property of Silver (Ag) Nanoparticles Filled Epoxy Composites for the Application of Electrically Conductive Adhesives (ECAs) in Electronic

Packaging, Proceedings of the IEEE/CPMT International Electronics Manufacturing Technology (IEMT) Symposium, art. no. 4456501, pp. 496505 23) P.L. Teh, M. Mariatti, H.M. Akil, K.N. Seetharamu, A.N.R Wagiman, K.S. Beh, Improved Tg of mineral silica filled epoxy composites, National Symposium of Polymeric Materials 2006, Petaling Jaya, 12-14 Disember 2006 24) A.R. Azura, G. Suriati, M. Mariatti, Effect of filler loading on mechanical and conductivity properties of carbon black filled natural rubber composites, The 15th Scientific EMSM Conference, Terengganu, 4-6th December 2006. 25) J. Anuar, M.Mariatti, H. Ismail, Cure characteristics, morphology and mechanical properties of aluminium filled natural rubber composites (NR) and ethylene-propylene-diene (EPDM) composites, The 15th Scientific EMSM Conference, Terengganu, 4-6th December 2006. 26) F. N. Ahmad, M. Mariatti, P.Samayamutthirian, K.A. Mohd Azizli, Studies on various shape of mineral silica fillers on the properties of epoxy composites, The 15th Scientific EMSM Conference, Terengganu, 4-6th December 2006. 27) J. Anuar, M.Mariatti, H. Ismail, Study on electrical and thermal properties and ageing behavior of aluminum filled natural rubber (NR) and ethylenepropylene-diene (EPDM) composites, The 15th Scientific EMSM Conference, Terengganu, 4-6th December 2006. 28) V. Vilay, M. Mariatti, R. Mat Taib, K. Phasomsouk, Mitsugu Todo, Effect of fiber surface treatment on the properties of bagasse fiber-reinforced polyester composites, 8th Field-Wise Seminar, Penang, 22nd-23rd May 2006. 29) Muhammad Jannah. Mariatti Jaafar, Azhar Abu Bakar, The comparison of woven banana and mengkuang reinforced polyester properties, National Symposium of Polymeric Materials 2006, Petaling Jaya, 12-14 Disember 2006

30) Samayamutthirian Palaniandy, Khairun Azizi Mohd Azizli, Mariatti Jaafar @ Musthapa, Farrah Mohd Noor, Hashim Hussin and Syed Fuad Saiyid Hashim. (2006). µSIL as alternative filler in epoxy used in electronic packaging. Asian Symposium on Material Processing. The Japan Society of Mechanical Engineers, Bangkok, Thailand, 9-10 November 2006. 31) Teh, P.L., Mariatti, M., Akil, H.M., Seetharamu, K.N., Wagiman, A.N.R., Beh, K.S. (2006), High filled epoxy composites for electronic packaging application, Proceedings of the IEEE/CPMT International Electronics Manufacturing Technology (IEMT) Symposium , art. no. 4456466, pp. 275281 32) Tee, D.I., Mariatti, M., See, C.H., Chong, K.F.(2006) Study on the electrical property of silver (Ag) nanoparticles filled epoxy composites for the application of electrically conductive adhesives (ECAs) in electronic packaging, Proceedings of the IEEE/CPMT International Electronics Manufacturing Technology (IEMT) Symposium , art. no. 4456501, pp. 496505 33) M. Mariatti, M.Jannah, A. Abu Bakar, Abdul Khalil H. P. S. Mechanical and water absorption properties of banana and pandanus woven fabric reinforced polyester composites. Sixth Intenational Conference on Composite Science and Technology (ICCST/6), Durban, South Africa, 2224 January 2007 34) A. R. Azura, Suriati Ghazali, M. Mariatti. The effect of filler loading and ageing time on mechanical and electrical conductivity properties of carbon black filled natural rubber. Sixth Intenational Conference on Composite Science and Technology (ICCST/6), Durban, South Africa, 22-24 January 2007 35) Vilay Vannaladsaysy, Mariatti Jaafar, Razaina Mat Taib, Korakanh Phasomsouk, Mitsugu Todo. Properties of bagasse Fiber Reinforced Polyester Composites, Before and After Fiber Treatment, 3rd Colloquium on Postgraduate Research (MAMIP2007), School of Materials and Mineral Resources Engineering USM, 10-11 April 2007

36) M. Jannah, M. Mariatti, A. Abu Bakar and Abdul Khalil H. P. S., 2007, Flexural and impact properties of banana woven fabric reinforced polyester composites, Proceedings of 3nd Colloqium on Postgraduate Research, National Postgraduate Colloqium on Materials, Minerals and Polymers 2007 (MAMIP 2007), 10 ­ April 2007, Vistana Hotel, Penang, Malaysia, 76. 37) V. Vilay, M. Mariatti, R. Mat Taib, K. Phasomsouk, Mitsugu Todo, The effect of fiber content on the mechanical properties of bagasse fiberreinforced polyester composites. 10th Field-Wise Seminar, Penang. 6-7 June 2007 38) M. Mariatti, M. Jannah, A. Abu Bakar, Abdul Khalil H. P. S., Flexural and impact properties of woven banana fabric reinforced unsaturated polyester composites, National Symposium on Polymeric Materials, UniKL City Campus, Kuala Lumpur, 27-28 November 2007 39) Suriati Ghazali, Mariatti Jaafar, Azizan Aziz & Mohd Nasir Tamin, Effect of curing conditions on the properties of epoxy, National Symposium on Polymeric Materials, UniKL City Campus, Kuala Lumpur, 27-28 November 2007 40) P. L. Teh, M. Mariatti, H. M. Akil, A. N. Wagiman, Properties of epoxy coated cordierite filler composites, 6th ASEAN Microscopy Conference, Cheranting, Pahang, 10-12th December 2007. 41) D. I. Tee, M. Mariatti, A. Azizan, C. H. See and K. F. Chong, Thermal and electrical conductivity properties of silver nanoparticles filled epoxy composites for the application of electrically conductive adhesives (ECAs), 12 Asian Chemical Congress (12 ACC), Kuala Lumpur, 23-25 August 2007. 42) Nurdina A. Kadir, Mariatti Jaafar & Samayamutthirian Palaniandy, Physical and Mechanical Properties of Mineral Fillers filled PP composites, 2nd International Conference & Exhibition on Composite Materials & nano-structures, 5-7 August 2008. Melaka

43) V. Vilay, M. Mariatti, Zulkifli Ahmad, K. Pasomsouk, Mitsugu Todo, Mechanical properties and morphologies characterization of biodegradable PLLA/PCL polymeric blends, 2nd International Conference & Exhibition on Composite Materials & nano-structures, 5-7 August 2008. Melaka 44) L. Yusriah, M. Mariatti, A. Abu Bakar, Effect of particulate filler filled woven glass fabric-vinyl ester epoxy composites, 2nd International Conference & Exhibition on Composite Materials & nano-structures, 5-7 August 2008. Melaka 45) Norkhairunnisa Mazlan, Azizan Aziz, Mariatti M., Sim L. C., Mechanical and electrical properties of carbon nano fillers reinforced polydimethysiloxane, Proceeding of The Asia-Australasian Association for Composite Materials (ACCM-6), Kumamoto, Kyushu, Japan. 23-26 Sept 2008. 46) Yusriah Lazim, M. Mariatti, Azhar Abu Bakar, Effect of different woven pattern on the kenaf woven fabric reinforced unsaturated polyester composites, Proceeding of The Asia-Australasian Association for Composite Materials (ACCM-6), Kumamoto, Kyushu, Japan. 23-26 Sept 2008. 47) V. Vilay, M. Mariatti, Zulkifli Ahmad, K. Pasomsouk, Mitsugu Todo, Characterization of biodegradable PLLA/PCL and PLLA/PBSL polymeric blends, Proceeding of The Asia-Australasian Association for Composite Materials (ACCM-6), Kumamoto, Kyushu, Japan. 23-26 Sept 2008. 48) M.Mariatti, M. Jannah, W. L. Lam & A. A. Bakar, The properties of Natural Fibers and Woven Natural Fibers Reinforced Unsaturated Polyester (USP) Composites, Proceeding of the 1st Regional Workshop in the Interdisciplinary Area of Natural Resources/Materials, Cambodiana Hotel, Phnom Penh, Cambodia, 18-19 August 2008. 49) T.P. Chua, Mariatti Jaafar, Azizan Aziz, Azura A.Rashid, L.C. Sim, electrical and tensile properties of multi-wall carbon nanotubes filled

PDMS nanocomposites, National Symposium on Polymeric Materials 2008, Naza Hotel, 26-27 Nov 2008. 50) K.L. Chan, M. Mariatti, Z. Lockman, L.C. Sim, Effect of Ultrasonication Medium to the Electrical Properties of Copper Nanoparticle Filled Epoxy Composite, National Symposium on Polymeric Materials 2008, Naza Hotel, 26-27 Nov 2008. 51) Zulkarnain. M, M. Mariatti, I.A. Azid, Prediction Studies on Percolation Threshold Behaviour of Silver Filled Epoxy Composite for Electrically Conductive Adhesives Applications, International Electronics Manufacturing Technology Conference (IEMT), Penang, 4-6 Nov. 2008. 52) Zulkarnain. M, M. Mariatti, I.A. Azid, Effect of Nano Silver Particles Distribution on Electrical Conductivity of Epoxy Composite as an Environmentally Friendly Alternative to Sn/Pb solders in Electronics Packaging Applications, International seminar on chemistry and polymer 2009, Medan, Indonesia, 19-20 May 2009 53) Suriati Ghazali, Mariatti Jaafar, Azizan Aziz, Effect of filler shape and size on the properties of silver filled epoxy composites for electronic applications, 4th International Conference on Recent Advances in Materials, Minerals & Environment and 2nd Asian Symposium on Mineral & Processing, Feringghi, Penang. 1st-3rd June 2009 54) V. Vilay, M. Mariatti, Zulkifli Ahmad, K. Pasomsouk, Mitsugu Todo, Improvement of fracture properties of biodegradable PLLA/PBSL and PLLA/PBSC polymer blends due to LTI addition (Japan Society for Composite Materials JCOM-38), Doshisha University Imadegawa (Kanbaikan), Kyoto. 10-11 March 2009 55) V. Vilay, M. Mariatti, Zulkifli Ahmad, K. Pasomsouk, Mitsugu Todo, Effect of LTI on the microstructure and mechanical properties of biodegradable PLLA/PBSC blend, M&M 2009, 24-26, July, 2009. International Conference Center, Hokkaido, Japan

56) V. Vilay, M. Mariatti, Zulkifli Ahmad, K. Pasomsouk, Mitsugu Todo, Characterization of microstructure and mechanical properties of biodegradable PLLA polymer blends with LTI. International Symposium on Nano/Amorphous Materials and Interface, August 7-8, 2009, Sansa-tei (Tohgatta, Miyagi-Zao, Japan) 57) Nurdina A. Kadir, Mariatti Jaafar & Samayamutthirian Palaniandy, Effect of filler ratio on mechanical properties of Mica/silica hybrid filled polypropylene composites, The 1st AUN/SEED-Net Regional Conference on Materials 2009 (RCM 2009), 16-17th February 2009, Penang. 58) Kenneth T. S. Kong, M. Mariatti, Azura A. Rashid and James J. C. Busfield, "Properties of silicone rubber filled with functionalized multiwalled carbon nanotubes (MWCNT)," 11th International Conference on Electronic Material and Packaging Conference (EMAP), 1st-3rd December 2009, Penang. 59) Hamizah Abd Samad, Mariatti Jaafar, Radzali Othman, Properties of Bioactive Fillers Filled PMMA Bone Cement Composite, Asian Workshop on Polymer Processing (AWPP 2009), 1-4 December 2009, G Hotel, Penang 60) Yusriah Lazim, M. Mariatti, Azhar Abu Bakar, Comparison on the Properties of Phenolic Hollow Microspheres (PHMS)/ Woven Glass Fabric and Woven Basalt Fabric Filled Vinyl Ester Composites, Asian Workshop on Polymer Processing (AWPP 2009), 1-4 December 2009, G Hotel, Penang 61) Chua, T P; Mariatti, M; Azizan A and Rashid A A. (2009) Thermal properties of functionalized multi-walled carbon nanotube/poly(dimethylsiloxane) nanocomposites. In: 11th International Conference on Electronic Materials and Packaging (EMAP), 1st-3rd December 2009, Penang. 62) V. Vilay, M. Mariatti, Zulkifli Ahmad, K. Pasomsouk, Mitsugu Todo, Effect of blend ration and copolymer on mechanical behavior of biodegradable polymeric blends. The 2nd AUN/SEED-Net Regional Conference on

Materials Engineering: Material for Changing World, Chonburi, Thailand. 19-20 Nov 2009. 63) V. Vilay, M. Mariatti, Zulkifli Ahmad, K. Pasomsouk, Mitsugu Todo, Fabrication and characterization of macroporous poly (L-lactide) scaffolds by Solid-liquid phase separation and freeze extraction techniques. The 18th Scientific Conference Electron Microscopy Society of Malaysia & 19th Annual General Meeting of EMSM, Mines Resort City, 15-17 December 2009 64) Noor Mazni Ismail, Azizan Aziz, Mariatti Jaafar, Evaluation and visualization of filler dispersion in carbon nanotubes/polymethylmethacrylate composites powder prepared via coagulation method, International conference on nanotechnology (ICONT2009), 14th-17th December 2009, Langkawi. 65) V. Vilay, M. Mariatti, Zulkifli Ahmad, K. Pasomsouk, Mitsugu Todo, Effect of Lysine Triisocyanate on the Microstructure and Mechanical Properties of Biodegradable Poly (L-lactic acid) (PLLA) and Poly (-caprolactone) (PCL) Blends, PRIM 2010 66) Chou P.M. & Mariatti M. Characterization of PMMA bone cement filled with Bioactive fillers, SAMPE Asia Conference 2010, KLCC 19-20 January 2010 67) Yusriah Lazim & M. Mariatti,Effect of untreated and silane treated silica on the properties of hybrid phenolic hollow microsphere (PHMS)/Silica filled vinyl ester composites, 3rd Regional Conference Interdisciplinary on Natural Resources and Materials Engineering, Langkawi, 25-26 October 2010 68) M. S. Nurul & M. mariatti, Synthetic diamond and copper filled polypropylene composites, 3rd Regional Conference Interdisciplinary on Natural Resources and Materials Engineering, Langkawi, 25-26 October 2010 69) Nurul Hidayah & M. Mariatti, Comparison on the properties of Aluminiumand silver-filled high density polyethylene composites, 3rd Regional

Conference Interdisciplinary on Natural Resources and Materials Engineering, Langkawi, 25-26 October 2010 70) Azliyana Ahmad, Samayamutthirian Palaniandy & Mariatti Jaafar, Recovery and reducing particle size of silver reflective layer from DR-R waste, 3rd Regional Conference Interdisciplinary on Natural Resources and Materials Engineering, Langkawi, 25-26 October 2010 71) V. Vilay, M. Mariatti, Zulkifli Ahmad, K. Pasomsouk, Mitsugu Todo, Compatibilization of biodegradable poly (L-lactic acid) (PLLA) blends with lysine triisocynate, 3rd Regional Conference Interdisciplinary on Natural Resources and Materials Engineering, Langkawi, 25-26 October 2010 72) Mariatti Jaafar, Suriati Ghazali, Azizan Aziz, Flexural properties of hybrid nano silver and micron silver in epoxy composites for conductive adhesive application, 7th International Symposium on Advanced Materials in Asia-Pacific & JAIST International Symposium on Nano Technology 29th Sept-1st Oct 2010. 73) Mariatti, M., Foo, Y.L., Azizan, A., and Sim, L.C., Properties of Epoxy/Silica Thin Film Composite for Electronic Application, The 7th Asian-Australasian Conference on Composite Materials, Taipei, 15-18 Nov. 2010. 74) Hamizah Abd. Samad, mariatti Jaafar, Radzali Othman, Masakazu Kawashita, Noor Hayati Abdul Razak, Setting and flexural properties of polymethymethacrylate (PMMA) bone cement composites incorporated with hydroxyapatite and glass ceramic, Regional biomaterials scientific meeting 2010, Kota Bharu, 29-30 October 2010. 75) Hamizah Abd. Samad, Mariatti Jaafar, Radzali Othman, Masakazu Kawashita, Noor Hayati Abdul Razak, Thermal and fracture properties of polymethymethacrylate (PMMA) bone cement composites incorporated with hydroxyapatite and glass ceramic , 10th National Symposium on Polymeric Materials (NSPM), Langkawi, 8-10 November 2010. 76) Chou P.M., Mariatti M. , Zulkifli Ahmad & Mitsugu Todo, Compatibilization of Poly (L-Lactic Acid)/ Poly(butylene succinate-co-L-lactate) blend with

Polytetramethylene Ether Glycol, 10th National Symposium on Polymeric Materials (NSPM), Langkawi, 8-10 November 2010. 77) S. M. Kong & Mariatti M., Properties of synthetic diamond and silicon nitride nanofillers filled polydimethyldiloxane (PDMS) composites, 10th National Symposium on Polymeric Materials (NSPM), Langkawi, 8-10 November 2010. 78) Suriati Ghazali, Mariatti Jaafar, Azizan Aziz, Effect of processing technique on properties of silver-filled epoxy composites, 10th National Symposium on Polymeric Materials (NSPM), Langkawi, 8-10 November 2010. 79) M. Mariatti, L. N. Saw, A. R. Azura & A. Azizan, Tensile and electrical properties of thin, flexible and transparent multi-walled carbon nanotubes/epoxy composites, Seminar Kebangsaan Aplikasi Sains dan Matematik 2010, Johor Bharu, 8-10 Disember 2010.

Award 1. Assoc. Prof. Dr. Khairun Azizi Mohd Azizli, Mr. Samayamutthirian @ Thilagan Palaniandy, Dr. Mariatti Jaafar @ Mustapha, Dr. Hashim Hussin, Dr. Syed Fuad Saiyid Hashim, 2006, Bronze Medal, Ministry of Science, Technology & Innovation Malaysia. Malaysia Technology Expo 2006. 2. Mr. Samayamutthirian @ Thilagan Palaniandy, Assoc. Prof. Dr. Khairun Azizi Mohd Azizli, Dr. Mariatti Jaafar @ Mustapha, Dr. Hashim Hussin, Dr. Syed Fuad Saiyid Hashim, Dr. Leh Cheu Peng, 2007, Silver Medal, Malaysian Invention and Design Society. ITEX Malaysia. 3. Samayamutthirian Palaniandy, Mariatti Jaafar and group, µSiO2-Novel Low cost high performance filler for manufacturing and construction industries from tin mine waste, Malaysia Technology Expo (MTE) 2009, Kuala Lumpur, 21-23 Feb 2009 (silver Medal) d) External Examiner for Thesis: Doctor of Philosophy

1. Anizah Kalam, Development of hybrid polymer nanocomposites. University Teknologi MARA (2010).

Master `s

1) Mohd Nazry Salleh, Pencirian dan potensi Dolomit Perlis sebagai bahan pengisi dalam produk komposit termoset. Universiti Malaysia Perlis (2007) 2) Urip Agus Salim, Study on morphology and mechanical properties of binary and ternary blend system of PBT, PC and PET. Universiti Malaya. (2005) 3) Chua Ngeah Boon, Creep deformation of amorphous polymer (Polyurethane). Universiti Malaya. (2008) 4) Tunku Ishak Al-Irsyad T. Kudin, Development of Palm Oil Derived Carbon Nanotubes and Its Application in Lithium Ion Batteries. Universiti Teknologi MARA. (2009) 5) Zainb Shaker Radif, Development of combat armour from ramie fiber. Universiti Putra Malaysia (2009) 6) Mohd. Shahrul Nizam b. Salleh, Characterization and processing parameters of Polyvinyl Alcohon-Tapioca starch for injection moulding. Universiti Teknologi Malaysia (2010) 7) Ismail Ibrahim, properties and biodegradablility of paper sludge filled polypropylene (PP)/Ethylene Propylene Diene Terpolymer (EPDM) composites. Universiti Malaysia Perlis (2010)

Master `s (mixed mode) 1) [email protected] Redzeki Mohd Anuar, Studies on degradation and stability of polypropylene (PP) material via artificial weathering exposure. Universiti Malaya (2007)

e) Internal Examiner for Thesis: Doctor of Philosophy 1) Chow Weng Shyang.`Mechanical, Morphological and Rheological Studies on Polyamide 6/Polypropylene/Organoclay Nanocaomposites. (2005) 2) Kulkarni Venkatesh Malhararao. Computational fluid flow analysis of mold filling process in electronic packaging. (2006) 3) Suryadianshah. Kajian potensi bahan kimia baru, etilena diamina dilaurat sebagai agen pengkupel di dalam komposit getah asli dan polipropilena (2007) 4) Kusmono, Effect of clay modification and compatibilizers on the mechanical, morphological and thermal properties of polyamide 6/Polypropylene nanocomposites (2008) 5) Mohamed Nainar Mohamed Ansari, Multiwalled-carbon nanotubes and flespar reinforced polypropylene composites: Mechanical, thermal and morphological properties (2009) 6) Mohd Amir Al-Amin Bin Mohamad Nor, Penghasilan, pengirian dan sifatsifat porselin berliang yang dihasilkan memalui kaedah replika span polimer dan potensinya sebagai teras komposit sandwic (2010) 7) Pooria Pasbakhsh, Preparation and properties of holloysite nanotubes (HNTs) filled ethylene propylene diene monomer (EPDM nanocomposites (2010) 8) Nik Noriman Bin Zulkifli, Characterization ans properties of styrene butadiene rubber/recycle acrylonitrile-butadiene rubber (SBR/NBRr) blends (2010)

Master by research

1) Nguyen Minh Luan, Preparation and characterization of Poly (L-Lactideco-E-Caprolactone) for scaffold application (2008)

2) Mohd Shamsul Farid Bin Samsudin, Rheological behavior of talc and calcium carbonate filled polypropylene hybrid composites (2008) 3) Kry Nallis, Comparative study on the properties of rice straw/polypropylene and micaceous clay/polypropylene composites (2009) 4) Norlin Nosbi, Studies on the properties of pultruded kenaf fiber reinforced polyester composites (2010)

Master's (mixed mode) 1) 2003 Effect of stoichiometry, thermal curing schedule and hygrothermal aging on glass transition temperature of Novolac epoxy compound/Amine system' Universiti Sains Malaysia 2) 2003 `Kajian terikan kekisi ke atas komposit aluminium 2014 diperkuat alumina (Al2O3) dengan cara kerja mekanik dan rawatan haba' Universiti Sains Malaysia 3) 2003 `Characterization of Photoresist Processing and Profile for DNQ (Diazonaphthoquinone)-Novolac Based Image Reversal Resist During Photolithography Fabrication on Glass Substrate' Universiti Sains Malaysia 4) 2004 `Paper-Based Honeycomb Core Sandwich Structure" Universiti Sains Malaysia 5) 2004 `Nanosilica Polypropylene Composites" Universiti Sains Malaysia

6) 2005 `Low CTE Substrate Materials for Electronic Packaging Application' Universiti Sains Malaysia 7) 2007 "A preliminary study on the biodegradation and mechanical properties of starch filled linear low density polyethylene/natural rubber composites' 8) 2007 `Investigation on the effect of strain-rate on the properties of materials using Split Hopkinson pressure bar apparatus' Universiti Sains Malaysia 9) 2010 "Functionalization of Multi wall Carbon nanotubes" Universiti Sains Malaysia

f) Reviewing Articles in Academic Journals

International 1) Physical and mechanical properties of the Doum Palm fibers. Academic Journal (2007) 2) Effect of Interfacial Treatment on the thermal properties of thermal conductive plastics. Express Polymer Letter (2007) 3) Mechanical and Conductive Properties of Carbon Black-Filled High Density Polyethylene, Low Density Polyethylene and Linear Low Density Polyethylene, Journal of Thermoplastic Composite Materials (2008) 4) Effect of modification condition of glass on ABS/short glass fiber composites. Polymer for Advanced Technologies (2008)

5) Effect of chemical modification on water-sorbtion and mechanical properties of flax fiber. European Polymer Journal (2008) 6) Preparation of needle shaped nano-copper by microwave-assisted and study on it's application of enhance epoxy resin coating electrical conductivity, Applied Surface Science (2008). 7) 7.New (PP/ENR)/nano-CaCO3 based formulation in the prespective of polymer recycling: Effect of nanoparticles and compatibilizer. Polymer for Advanced Technologies (2009) 8) The study of Dynamic Rheological Behavior, Mechanical Performance, Shrinkage Behavior and Morphology of Chemically Coupled Talc filled Polypropylene (Journal of Vinyl and Additive Technology) (2009) 9) Effect of montmorilonite on strength, expansive coffecient and setting shrinkage of recycled unsaturated polyester concrete (Journal of Materials in Civil Engineering) (2009) 10) Decomposition rate control of PLLA scaffold by heat treatment (Journal of Applied Polymer Science) (2009) 11) Studies of different kinds of fiber pretreating on the mechanical properties of PLA/ sweet sorghum fiber composites (Journal of Applied Polymer Science) (2009) 12) Influence of alkali treatment on creep properties and crystallinity of jute fiber (Bioresources) (2009) 13) Modeling and prediction of compressive creep of silane treated TiO2/highdensity polyethylene, Composite Science and Technology (2009) 14) Structural Characterization of Alkali treated Borassus Fruit Fine Fibers for Physical and Mechanical Properties. Iranian Polymer Journal (2009) 15) Studies of different kinds of fiber pretreating on the properties of PLA/ sweet sorghum fiber composites (R1) (Journal of Applied Polymer Science) (2009) 16) Production of nano silver polypropylene filter by electron beam gun using a modified balzers machine. Journal of Nanomaterials (2010)

17) Mechanical properties and thermal behaviour of Fibre (Stipa tenacissima L) / lignin/ unsaturated polyester resin system. Materials Science & Engineering A (2010) 18) High modulus regenerated cellulose fiber-reinforced cellulose acetate butirate biocomposites. Journal of Composite Materials (2010) 19) Characterization of Sapegrass fibers. BioResources (2010) 20) Mechanical properties and morphology of polypropylene-calcium carbonate nanocomposites prepared by dynamic packing injection molding. Journal of Applied Polymer Science (2010) 21) The effect of carbon nanotube concentration on the electrical, optical and mechanical properties of cnt-polycarbonate composites, Express Polymer Letter (2010) 22) Phase-morphology, physical properties, and biodegradation behavior of novel PLA/PHBHHx blends, Acta Biomaterialia (2010) 23) Nano-SiO2 filled rice husk / polypropylene composites: Physicomechanical properties, Composites Part B (2010) 24) Viscosity, shear and peel strength of natural rubber-based adhesives containing hybrid tackifiers, Journal of Vinyl and Additive Technology (2010) 25) Physical Properties of Wood Plastic Composites Hybridized with Inorganic Fillers. Composites Part B (2010) 26) Preparation and characterization of an epoxy resin modified by a combination of MDI based Polyurethane and Montmorillonite. Journal of Applied Polymer Science (2010)

National

1. The morphology and tensile properties of ethylene vinyl acetate/organoclay nanocomposites: The effect of methyl ethyl ketone. Malaysian Journal of Microscopy Volume 2, Electron Microscopy Society Malaysia (2006). 2. SEM, TEM, and AFM study on morphological properties of injection molded polyamide 6/polypropylene/organo-montmorilonite nanocomposites. Malaysian Journal of Microscopy Volume 2, Electron Microscopy Society Malaysia (2006) 3. Thermal conductivity measurement of TPNR composites with rapid thermal conductivity apparatus. Journal of Solid State Science & Technology/Letters. The Malaysian Solid State Science and Technology Scociety (MASS) (2006) 4. Enhancing toughness of polypropylene and polystyrene-Application of styreneb-ethlene-alt-butylene-b-styrene. Jurnal Fakulti Kej. Kimia dan Kej. Sumber Mineral. Universiti Teknologi Malaysia. (2007) 5. Silane grafting and crosslinking of metallocene-catalysed LLDPE and LDPE. The Malaysian Polymer Journal. The Malaysian Polymer Journal Plastics and Rubber Institute Malaysia (2007) 6. Polymerization (2008) 7. Fracture topography study of boron carbide powder-rubber composites applied in uniaxial tensile loading condition. Malaysian Journal of Microscopy Volume 4, Electron Microscopy Society Malaysia (2008) 8. Morphology characterization of synthetic conducting polymers. Malaysian Journal of Microscopy Volume 4, Electron Microscopy Society Malaysia (2008) 9. Morphological, mechanical and electrical conductivity study on epoxy-graphite composites. The Malaysian Polymer Journal. The Malaysian Polymer Journal Plastics and Rubber Institute Malaysia (2008) 10. Effect of unsaturated polyester concentration on rheologocal, characteristics of polypropylene-unsaturated polyester reactive blend. Polymer Journal Plastics and Rubber Institute Malaysia (2009) of protonic polyaniline/Multi walled carbon nanotubes/Manganese dioxide nanocomposites. Journal of Physical Science

11. Effect of isothermally held temperature on spherullitic growth rate for palm oil filled PP using polorized optical microscopre (POM). Malaysian Journal of Microscopy Volume 5, Electron Microscopy Society Malaysia (2009) 12. Effect of different treatment of bagasse fiber on mechanical properties and swelling behavior of bagasse fiber filled LDPE composites. Malaysian Journal of Microscopy Volume 5, Electron Microscopy Society Malaysia (2009) 13. Thermal characterization and morphology of linear low density PE/PVA blends containing Maleic Acids as compatibilizer. Malaysian Journal of Microscopy Volume 5, Electron Microscopy Society Malaysia (2009) 14. Morphology observation and physical properties of phenolic resin-silicate layered nanocomposites. Journal of Nuclear and Related Technologies (JNRT). Special edition 2009. 15. Development of Iron (III)-Ion selective (Poly Vinyl Chloride) membrane electrode base on curcumin. Journal of Nuclear and Related Technologies (JNRT). Special edition 2009. 16. Chemical treatments and tensile properties of sugarcane bagasse rind filled unplasticised poly (vinyl chloride). PERTANIKA Journal of Science and Technology. 2009

g) Reviewing Chapter of Book 1. Oil palm empty fruit bunch fibre-filled poly(vinyl chloride) composites. UPM Press.

h) Chapter in Book 1. Mariatti Jaafar & Abdul Khalil Shawkataly, Properties of Bagasse fiberreinforced unsaturated polyester (USP) Composites, Research on Natural Fiber Reinforced Polymer Composites (Editor: Mohd Sapuan Salit), University Putra Malaysia Press, Serdang, 2009.

2. Abdul Khalil Shawkataly & Mariatti Jaafar, Agro waste-hybrid composites: the properties of coir/glass hybrid reinforced polyester composites, Research on Natural Fiber Reinforced Polymer Composites (Editor: Mohd Sapuan Salit), University Putra Malaysia Press, Serdang, 2009.

i)

Short Course

1. Attended Polymer Science & Technology, organized by Polymer IRC, United Kingdom, 29 October-5 November 2009; Novotel, Sheffield, UK.

Information

Microsoft Word - CV _Mariatti_

38 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

91992