Read section21.pdf text version

Solder Equipment

Section 21

Solder Equipment

Butane . . . . . . . . . . .447 Cordless Irons . . . . . .444 Desoldering Braid . . . . . . . . .451, 452 Desoldering Pumps . .450 Desoldering Stations . . . . . . .440, 442 Flux and Dispensers . . . . .448, 449 Flux Pens . . . . . . . . .449 Fume Extractors . . . .439, 440, 445 Gas Powered Irons . . . . . . . . . .446-448 Hot Air Stations . . . . .442 Solder . . . . . . . .449~451 Soldering Irons . .443~447 Soldering Stations . . . . . .436~440, Stands . . . . . . .439, 443, 445, 451,

WTCPT Soldering Station WES51 Electronic Soldering Station

·Innovative heater and sensor combination gives you quick heat-up and rapid temperature recovery ·Wireless temperature lockout to prevent operators from raising the temperature to levels higher than specified for the board or component ·Temperature range of 350°F~850°F ·Accuracy within 9°F ·Designed for continuous production soldering ·Tip temperature offset capability which provides the user with the capability of resetting station temperature readings to variations in tip sizes and styles ·Station automatically powers down after 90 minutes of inactivity to prolong tip life and save power ·ESD safe to protect sensitive components ·Improved plug on the PES51 iron and new receptacle on the WES51PU power unit for easier iron replacement Note: ·PES51 iron works only with WES51 solder station, PES50 iron works only with WES50 solder station ·Uses ET series tips ·Soldering station comes complete with WES51PU power unit, PES51 soldering pencil with ETA tip, and PH50 stand and sponge Order # Mfr. # Description (ea.) 96-1760 WES51 Complete soldering station $129.00 96-1762 PES51 Replacement soldering pencil 44.95 w/ETA tip for WES51soldering station 96-1350 PES50 Replacement soldering pencil 44.95 w/ETA tip for WES50 soldering station 96-1355 PH50 Replacement soldering 19.95 stand and sponge ·A transformer powered soldering station complete with a lightweight, heat insulated, low wattage soldering pencil ·Maximum tip temperature is controlled by Weller's special "closed loop" method ·Grounded tip ·Iron features a stainless steel plug-in heating element and a nonburning silicone rubber cord ·PTA7 1/16" tip included Order # Mfr.# Description 96-030 WTCPT Soldering station Replacement parts for WTCPT 96-1226 PH1201ESD Iron stand assembly 96-1229 TC204 Spring/funnel assembly 96-350 TC201T Iron with cord 96-120 EC234 Heating element 96-405 SW60 Switch assembly 96-395 TC205 Sponge Replacement tips for WTCPT iron (TC201) 96-035 PTA7 700°F, 0.062" screwdriver 96-1069 PTA8 800°F, 0.062" screwdriver 96-040 PTB7 700°F, 0.093" screwdriver 96-355 PTC7 700°F, 0.125" screwdriver 96-045 PTD7 700°F, 0.187" screwdriver 96-1056 PTP7 700°F, 0.031" conical 96-1059 PTO8 800°F, 0.032" long conical 96-050 PTO7 700°F, 0.032" long conical (ea.) $149.95 27.90 7.90 88.27 19.58 31.99 1.19 3.91 3.91 3.91 3.91 3.91 3.91 3.91 3.91

WESD51 Digital Soldering Station

·Innovative heater and sensor combination gives you quick heat-up and rapid temperature recovery ·Wireless temperature lockout to prevent operators from raising the temperature to levels higher than specified for the board or component ·Temperature range of 350°F~850°F ·Accuracy within 9°F ·Designed for continuous production soldering ·Can switch between °F and °C ·Tip temperature offset capability which provides the user with the capability of resetting station temperature readings to variations in tip sizes and styles ·Station automatically powers down after 90 minutes of inactivity to prolong tip life and save power ·Slim, comfortable pencil reduces operator fatigue ·ESD safe to protect sensitive components ·Uses ET series tips ·Soldering station comes complete with WESD51PU power unit, PES51 soldering pencil with ETA tip, and PH50 stand and sponge Order # 96-1764 96-1762 96-1355 Mfr. # WESD51 PES51 PH50 Description Digital soldering station Replacement soldering pencil w/ETA tip Replacement soldering stand and sponge (ea.) $174.00 44.95 19.95

Replacement Irons

Replacement iron must be used with Weller soldering station such as EC1002 series. Blue plastic handle meets requirements for ESD safety. Includes ETA type tip. 24V, 40W. Order # Mfr. # For Station 96-011 EC1201A EC1002 Series Replacement parts for EC1201A 96-1209 BA60 Barrel nut assembly 96-120 EC234 Heater assembly 96-1218 EC229A Sensor assembly 96-1219 EC233 Cord assembly 96-1220 EC258 Handle assembly Replacement parts for EC1301R 96-1205 EC231 Barrel nut assembly 96-1206 EC259 Heater assembly 96-1207 EC260 Sensor assembly (ea.) $110.69 7.06 19.58 61.60 35.69 8.39 9.56 36.79 58.23

Replacement Tips for EC1201, TC201, PES50 and PES51 Irons; WES50, WES51 and WESD51 Soldering Station; WCC100 Soldering Station

Order # 96-435 96-1107 96-1108 96-1109 96-1110 96-1111 96-455 96-1114 96-1115 96-450 96-1120 96-1121 96-440 96-1123 96-1124 96-445 Weller # ETA ETB ETC ETD ETH ETP ETT ETV ETAA ETO ETS ETJ ETK ETL ETM ETR Type 1 /16" screwdriver 3 /32" screwdriver 1 /8" screwdriver 3 /16" screwdriver 1 /32" screwdriver 1 /32" conical 0.25" conical 0.29" single flat 1 /16" single flat 1 /32" long conical 1 /64" long conical 1 /32" long screwdriver 3 /64" long screwdriver 5 /64" long screwdriver 1 /8" long screwdriver 1 /16" long screwdriver (ea.) $3.80 3.80 3.80 3.80 3.80 3.80 3.80 3.80 3.80 3.80 3.80 3.80 3.80 3.80 3.80 3.80

Dual Heat Soldering Station

·Dual wattage for light and heavy soldering ·Ideal for the professional as well as the do-ityourselfer ·20/40 watt temperature settings ·Quick heat-up and recovery ·Station includes power base with 20/40 watt control, soldering iron, holder and sponge ·Replacement tip available (#21-6055) ·UL listed Order # 21-6050 (ea.) $30.55

21

WLC100 Solder Station

·Variable power control (5~40W) ·40W pencil iron and ST3 interchangeable tip ·Replaceable heating element ·Cushioned foam grip ·Safety guard iron holder ·On/off switch with "power-on" indicator light Order # Mfr.# Description 21-3475 WLC100 Solder station Replacement parts for WLC100 96-1567 ST7 Conical tip 96-310 ST1 Screwdriver tip 96-320 ST5 Single flat tip 96-1199 HE40 Heater 96-1254 WCC104 Sponge (ea.) $64.95 5.76 5.76 5.76 15.35 1.48 NET 30 Terms

Parts for EC3001

·Tips are made of a copper core which is electroplated with iron to extend the lifetime of tip Order # 96-015 96-020 96-360 96-025 96-395 Weller # EPH101 EPH106 EPH107 EPH109 TC205 Type Micropoint tip Screwdriver tip Chisel tip Conical tip Sponge (ea.) $6.44 6.44 6.44 6.44 1.19

436

Order Online

www.mcminone.com

WSD81/WSD161 Digital Silver Series Soldering Stations

The unique silver heating element and tip configuration allows the user to experience immediate heat-up and recovery. The patented low-mass tip has a 10% faster recovery time than conventional irons and tips. High output pencil allows you to work with lead-free solder. 80 watts of controlled power allows you to work on high-mass components and boards. Both stations are ESD safe to protect sensitive components. Programmable using the optional WCB1 (#96-1854) control module allowing for temperature lock-out (process control), temperature set-back (extended tip life), and °F to °C conversion. The WSD 161 operates on two independently controlled channels for simultaneous operation. Temperature range is 150°F~850°F with accuracy within 9°F. Uses LT series tips which are tinned using lead-free solder to comply with changing demands. The WSD81 soldering station includes the WSD81PU power unit, WSP80 soldering pencil, and WPH81 stand and sponge. The WSD161 includes the power unit only. Order # Mfr. # 96-1850 WSD81 96-1852 WSD161 Description 80W digital solder station 160W digital dual station, power unit only 96-1854 WCB1 Optional control module 96-1856 WSD81PU Replacement power unit for WSD81 96-1291 WSP80 Replacement 80W iron 96-1776 WPH81 Stand and sponge 96-1291 WSP80 Replacement 80W iron 96-1293 LT1 0.25mm round tip (ea.) $289.00 279.00 239.00 179.00 109.00 27.95 109.00 6.14 Order # 96-1294 96-1295 96-1296 96-1297 96-1298 96-1299 96-1300 96-1302 96-1303 Mfr. # LT1S LTA LTAS LTB LTC LTCS LTD LTH LTK Description 0.2mm round tip 1.6mm round tip 1.6mm round tip 2.4mm chisel tip 3.2mm chisel tip 3.2mm round tip 4.6mm chisel tip 0.8mm chisel tip 1.2mm chisel tip (ea.) $6.14 6.14 6.14 6.14 6.14 6.14 6.14 6.14 6.14

Solder Equipment

Section 21

WSL Digital Soldering Station with WMP Micro Soldering Pencil

Features a digital display for accurate temperature setting and monitoring of actual tip temperature. Station is ESD safe. The WMP micro pencil comes standard.The major advantages of the WMP soldering pencils are the heating element is contained in the pencil rather than the tip so you do not throw away a good heater every time you wear out a tip and the short tip-to-grip distance gives you excellent control. Additional product features and benefits: ·Super-fast heat-up saves you time ·Superior thermal recovery allows fast, efficient soldering ·Tips are secured to the pencil by use of a threaded end, which eliminates the need for a barrel nut ·Standard setback feature saves tip life and power ·Temperature range: 150°~850°F ·Accuracy within 9°F ·Uses NT series tips The WSL includes WSLPU power unit, WMP soldering pencil, and WMPH stand and sponge. Order # Mfr. # 96-1766 WSL 96-1770 WMP 96-1772 96-1774 96-1776 Description (ea.) Complete digital soldering station $289.00 Replacement soldering 109.00 pencil w/NT1 tip WSLPU Power unit only for WSL 179.00 WMPH Replacement stand and 27.95 sponge for WMP soldering pencil WPH81 Replacement stand and 27.95 sponge for WSP80 pencil WSL2PU Power unit only for WSL2 279.00

SMT (Surface Mount) Series Tips for WSP80 Soldering Pencil

Fig.Order # 1 96-1860 1 96-1861 1 96-1862 2 96-1863 2 96-1864 2 96-1865 2 96-1866 3 96-1867 3 96-1868 3 96-1869 3 96-1870 3 96-1871 3 96-1872 3 96-1873 4 96-1874 4 96-1875 4 96-1876 4 96-1877 4 96-1878 4 96-1879 4 96-1880 4 96-1881 Mfr. # LTSMT01 LTSMT02 LTSMT03 LTSMT04 LTSMT05 LTSMT06 LTSMT07 LTSMT08 LTSMT09 LTSMT10 LTSMT11 LTSMT12 LTSMT13 LTSMT14 LTSMT15 LTSMT16 LTSMT17 LTSMT18 LTSMT19 LTSMT20 LTSMT21 LTSMT22 Type Blade Blade Blade Slot Slot Slot Slot Tunnel Tunnel Tunnel Tunnel Tunnel Tunnel Tunnel Quad Quad Quad Quad Quad Quad Quad Quad A Inches Millimeters 0.410 10.41 0.620 16.75 0.820 20.83 0.070 1.78 0.060 1.52 0.100 2.54 0.090 2.29 0.180 4.57 0.410 10.41 0.450 11.49 0.520 13.21 0.620 15.75 0.720 18.27 0.740 18.80 0.105 2.67 0.410 10.41 0.500 12.70 0.540 13.72 0.750 19.05 0.915 23.24 0.965 24.51 1.155 29.59 B C Inches Millimeters Inches Millimeters (ea.) 0.022 0.56 0.280 7.11 $75.60 0.022 0.56 0.280 7.11 84.24 0.022 0.56 0.280 7.11 80.64 0.195 4.95 0.070 1.78 41.04 0.090 2.29 0.070 1.78 41.04 0.068 1.73 0.055 1.40 41.04 0.190 4.53 0.070 1.78 41.04 0.200 5.08 0.090 2.29 47.52 0.200 5.08 0.090 2.29 47.52 0.270 6.86 0.090 2.29 47.52 0.375 9.53 0.125 3.18 47.52 0.375 9.53 0.125 3.18 47.52 0.375 9.53 0.125 3.18 47.52 0.365 9.02 0.125 3.18 47.52 0.303 7.70 0.150 3.81 84.24 0.410 10.41 0.150 3.81 84.24 0.500 12.70 0.150 3.81 84.24 0.340 8.60 0.150 3.81 84.24 0.750 19.05 2.350 5.96 84.24 0.680 17.27 0.150 3.81 99.84 0.965 24.51 2.350 5.96 99.84 1.165 29.59 2.350 5.96 99.84

A

C

B

A

1

A C

B

2

B

C

A

3

B

A

C

4

96-1778

11/2 YEAR LIMITED WARRANTY

B

Fig. 4

C

NT Series Tips for the WMP Micro Soldering Pencil

Order # 96-1780 96-1782 96-1784 96-1786 96-1788 96-1790 96-1792 96-1794 96-1796 96-1798 96-1800 96-1802 96-1804 Mfr. # Type NT1 Micro NT1S Micro NT1X Bent round NT4 Round NT6 Chisel NTA Chisel NTB Chisel NTC Chisel NTD Chisel NTH Chisel NTK Chisel NTAX Bent chisel NTGW Cylindrical A B Inches Millimeters Inches Millimeters 0.010 0.25 0.010 0.25 0.016 0.40 0.063 1.60 0.047 1.20 0.063 1.60 0.016 0.40 0.063 1.60 0.016 0.40 0.094 2.40 0.031 0.80 0.126 3.20 0.031 0.80 0.157 4.00 0.031 0.80 0.031 0.80 0.016 0.40 0.047 1.20 0.016 0.40 0.063 1.60 0.031 0.80 0.079 2.00 0.118 3.00

®

C

A

B A A C

C A

Loner Single and Dual Soldering Stations

·Accurate linear temperature control ·Easy to maintain and calibrate ·Wide variety of soldering tips available ·952SX dual station offers both standard soldering and heavy-duty soldering in one unit Specifications: ·Power rating: 15~220W ·Range: 400~800°F (205~427°C) ·Regulation: ±6°F (±3°C) ·Tip to ground voltage/resistance: <2mV/<2ohm ·Dimensions: 4.1" (W) x 8.2" (H) x 10" (D) ·11/2 year manufacturer warranty Order # 21-4665 21-4666 Mfr. # 951SX 952SX Description Single soldering station Dual soldering station (ea.) $164.38 313.95

Fig. 1 1 2 Fig. 5 3 4 4 4 Fig. 1 4 4 4 Fig. 3 4 2 5

Fig. 2

C Inches Millimeters (ea.) 0.291 7.40 $10.82 0.333 8.45 10.82 0.321 8.15 12.98 0.390 9.90 10.82 0.372 9.45 10.82 0.331 8.40 10.82 0.289 7.35 10.82 0.305 7.75 10.82 0.305 7.75 18.03 0.33 1 8.40 10.82 0.331 8.40 10.82 0.339 8.61 12.98 0.528 13.40 18.39

Replacement Parts for Loner Irons and Stations

Order # 21-4669 21-4670 21-4672 21-4673 21-4676 Mfr. # Description LT374 .01" x 1.13" conical tip LT375 .06" x .57" spade tip LT444 .04" x .78" spade tip LT429 .02" x .74" conical tip HS106BC .18" x .45" HD spade tip (ea.) $6.45 6.45 6.45 6.45 15.02

B

21

C

60/40 Bar Solder

Tenma bar solder is a general purpose solder with a 60/40 alloy content. The bar solder is supplied in the form of a 1 lb. bar. Great for tinning or solder pot applications. Order # 72-6309 (ea.) $11.95

Fax 1-800-543-4330 1-800-765-6960 437 1-800-543-4330, FAX 1-800-765-6960

Order Toll Free Order Toll Free

Solder Equipment

Section 21

®

®

Temperature Controlled Solder Station

The World's Most Affordable Soldering Stations

Tenma Test Equipment is recognized, industry wide, for setting new standards in value priced, high quality test equipment. Educators, technicians, light production facilities and technical hobbyists have relied on Tenma for excellent quality, innovation, value and performance in hand held and bench top test equipment, for over 20 years. Now Tenma brings this mindset to the realm of soldering equipment. In the workshop, the service bench, and classroom or on the production line, Tenma offers a station to suit most needs.

Tenma #21-7958 is the perfect station in assembly, prototype and service environments where close temperature control is important. Tip-mounted thermocouple and electronic closed loop control keeps tip temperature within 2% of the setpoint. Two-line LCD readout simultaneously displays tip temperature and setpoint in degrees Celsius or Fahrenheit. LCD icons illustrate "Heat On" when iron is active, and "Wait" status when temperature deviates ±10°C from the setpoint. Features: ·Pushbutton up/down temperature setting ·Quick jump buttons for instant setpoint of 200°C, 300°C and 400°C ·Large LCD display ·Detachable/replaceable soldering iron ·Heat resistant silicon jacketed iron and line cord ·Integral iron tip cleaner, with included cleaning sponge ·Variety of replacement tips available, conical tip supplied (#21-7980) Specifications: ·Temperature range: 150~450°C (302~842°F) ·Heating element: 24VAC, 48W ·Iron length 73/4" ·Overall dimensions 51/2" (H) x 81/4" (W) x 41/2" (D) Order # 21-7958 (1-9) $139.00 (10-up) $125.00

® ®

Adjustable Solder Station

Adjustable Solder Station with Digital Display

Rugged soldering station is perfect for general purpose use, board level assembly and repair. Digital display will toggle between operating temperature and setpoint, in either Celsius or Fahrenheit. The low cost places it in reach of the occasional hobbyist, with high reliability that is suitable for the professional. Features: ·Closed loop control for improved accuracy and consistent temperature ·Temperature sensor incorporated into the heating element ·Rotary temperature setting ·Bright numeric LED temperature display ·Detachable/replaceable soldering iron ·Heat resistant silicon jacketed iron and line cord ·Separate ground lug ·Integral iron tip cleaner, with included cleaning sponge ·Variety of replacement tips available, conical tip supplied (#21-7980) Specifications: ·Temperature range: 302~896°F ·Heating element: 24VAC, 48W ·Iron length 73/4" ·Overall dimensions 33/4" (H) x 41/2" (W) x 63/4" (D) Order # 21-7935 (1-9) $99.95 (10-up) $89.95

®

Adjustable Solder Station

Rugged soldering station is perfect for general purpose use, board level assembly and repair. Its low cost places it in reach of the occasional hobbyist, with high reliability that is suitable for the professional. Features: ·Closed loop control for improved accuracy and consistent temperature ·Temperature sensor incorporated into the heating element ·Rotary temperature setting ·12 LED bargraph temperature display ·Detachable/replaceable soldering iron ·Heat resistant silicon jacketed iron and line cord ·Separate ground lug ·Integral iron tip cleaner, with included cleaning sponge ·Variety of replacement tips available, conical tip supplied (#21-7980) Specifications: ·Temperature range: 302~788°F ·Heating element: 24VAC, 48W ·Iron length 73/4" ·Overall dimensions 33/4" (H) x 41/2" (W) x 63/4" (D) Order # 21-7930 (1-9) $69.95 (10-up) $65.95

21

Rugged, low cost station is the ideal blend of durability and price. Adjustable metal iron holder may be attached to the left or right side of station, and integral tip cleaner includes a replaceable sponge. Features: ·Rotary temperature setting ·LED heating element status indication ·Variety of replacement tips available, conical tip supplied (#21-7980) Specifications: ·Temperature range: 320~896°F ·Heating element: 110VAC, 50W ·Iron length 73/4" ·Overall dimensions 33/4" (H) x 41/2" (W) x 63/4" (D) Order # 21-7950 (1-9) $39.95 (10-up) $35.95 NET 30 Terms

®

Replacement Soldering Iron

®

Replacement Soldering Iron

·Direct replacement for iron supplied with Tenma #21-7955 soldering station ·24V, 48W heating element with internal temperature sensor ·Heat resistant silicon cord ·Supplied with conical tip (#21-7980) Order # 21-7956 (1­9) $7.49 (10­up) $6.75

·Direct replacement for iron supplied with Tenma #21-7930 and 21-7935 soldering stations ·24V, 48W heating element with internal temperature sensor ·Heat resistant silicon cord ·Supplied with conical tip (#21-7980) Order # 21-7936 (1-9) $7.49 (10-up) $6.75

438

Order Online

www.mcminone.com

Solder Equipment

Section 21

A

®

C

Adjustable Solder Station

®

Adjustable Solder Station

B

®

Rugged soldering station is perfect for board level assembly and repair and is rugged enough for continuous duty and production use. Features: ·Closed loop electronic temperature control ·Temperature sensor incorporated into the heating element ·Rotary temperature setting ·Slim, high precision iron handle ·Detachable/replaceable soldering iron ·Heat resistant silicon jacketed iron and line cord ·Detachable iron stand with integral tip cleaner, with included cleaning sponge ·Variety of replacement tips available, conical tip supplied (#21-7975) Specifications: ·Temperature range: 308~840°F ·Heating element: 24VAC, 48W ·Iron length 73/4" ·Overall dimensions 33/4" (H) x 41/2" (W) x 6" (D) Order # 21-7940 (1-9) $59.95 (10-up) $53.95

No-nonsense, low cost station is specifically intended for the classroom, where durability, physical size, and budget are a concern. It is also perfect for occasional use in the home workshop or tech bench. Features: ·Rotary temperature setting ·Integral tip cleaner, with included cleaning sponge ·Variety of replacement tips available, conical tip supplied (#21-7970) Specifications: ·Temperature range: 100~800°F ·Heating element: 110VAC, 50W ·Iron length 73/4" ·Overall dimensions 33/4" (H) x 41/2" (W) x 53/4" (D) Order # 21-7945 (1-9) $24.95 (10-up) $22.50

D

Replacement Soldering Iron Tips

E ·Specifically designed for use with Tenma ceramic heating element soldering irons and stations ·Five styles to suit a variety of soldering needs ·Sold individually ·Compatible Stations: #21-7930, 21-7935, 21-7950 and 21-7955 ·Compatible Pencil Irons: #21-8125, 21-8140 and 21-8150 Fig. A B C D E Order # 21-7980 21-7981 21-7982 21-7983 21-7984 Type (1-9) Conical $1.99 Micro point 1.99 Chisel point 1.99 Micro chisel point 1.99 Long conical 1.99 (10-24) (25-49) $1.79 $1.59 1.79 1.59 1.79 1.59 1.79 1.59 1.79 1.59

®

Solder Fume Extractor

Electronic solders typically contain rosin­resin compounds and lead, which when heated may create noxious fumes. Prolonged exposure to these fumes is considered potentially harmful and may create health problems including headaches, nausea and eye irritation. The Tenma Solder Fume Extractor greatly reduces this hazard by utilizing a highly efficient fan, and an activated carbon filter. Unit includes one filter, replacement filters available. Specifications: ·Absorption capacity: 1m3/minute ·Power requirements: ·110VAC 60Hz, 23W ·Filter dimensions: 5.1" (H) x 5.1" (W) x 0.4" (D) ·Overall dimensions: 10.6" (H) x 8.7" (W) x 6.6" (D) Order # 21-7960 21-7961 Description (1­9) Smoke absorber $39.95 Replacement filter (two­pack) 4.99 (10­up) $34.95 4.49

A

C

®

Replacement Soldering Iron

B

®

D

·Direct replacement for iron supplied with Tenma soldering station #21-7940 ·25V, 48W heating element ·Heat resistant silicon cord ·Supplied with conical tip (#21-7975) Order # 21-7941 (1-9) $7.49 (10-up) $6.75

Replacement Soldering Iron Tips

·Specifically designed for use with Tenma Soldering Stations #21-7945 ·Four styles to suit a variety of soldering needs ·All dimensions in millimeters ·Sold individually Fig. A B C D Order # 21-7970 21-7971 21-7972 21-7973 Type (1-9) Conical $1.99 Micro point 1.99 Chisel point 1.99 Micro chisel point 1.99 (10-24) (25-49) $1.79 $1.59 1.79 1.59 1.79 1.59 1.79 1.59

®

Replacement Tip Cleaning Sponges

·Specific sizes designed for Tenma Stations, ideal for use with any soldering equipment ·Heat resistant material is unaffected by soldering iron temperature ·Clean soldering iron tips are essential for maximum life span and effective soldering ·Sold individually Tenma Order # Station 21-7985 21-7930, 21-7935, 21-7950 21-7986 21-7940 21-7987 21-7945 21-7988 21-7955 21-8161 21-8160 Dimensions (1­9) (10­24) (25­49) 75mm x 45mm $0.99 $0.89 $0.79 68mm x 65mm 98mm x 55mm 58mm x 37mm 56mm x 38mm 0.99 1.79 0.99 0.99 0.89 1.61 0.89 0.89 0.79 1.43 0.79 0.79

A

C

®

Soldering Iron Stand with Sponge

·Great for independent soldering irons ·Two position soldering iron stand ·Built-in sponge tray ·Heavy duty square base ·90 day warranty Order # 21-3525 (1-9) $2.14 (10-up) $1.92

B

®

D

21

Replacement Soldering Iron Tips

E

·Specifically designed for use with Tenma Soldering Station #21-7940 ·Five styles to suit a variety of soldering needs ·All dimensions in millimeters ·Sold individually Fig. A B C D E Order # 21-7975 21-7976 21-7977 21-7978 21-7979 Type (1-9) Conical $1.99 Micro point 1.99 Chisel point 1.99 Micro chisel point 1.99 Long conical 1.99 (10-24) (25-49) $1.79 $1.59 1.79 1.59 1.79 1.59 1.79 1.59 1.79 1.59

®

Desoldering Bulb

·Removes solder quickly and easily with vacuum action ·3 oz. rubber bulb ·Long lasting teflon tip Order # 21-300 (1-9) $3.56 (10-24) $3.02 (25-49) $2.69

Fax 1-800-543-4330 1-800-765-6960 439 1-800-543-4330, FAX 1-800-765-6960

Order Toll Free Order Toll Free

Solder Equipment

Section 21

FP-102 Soldering Station

The FP-102 is a low cost, high performance soldering station. Features: ·The iron has a unique cartridge and soft grip design that allows cartridges with different tips and removable ergonomic grips to be quickly and easily replaced ·Tip temperature can be changed without changing the tip ·Four pre-set nominal soldering temperatures to choose from at the touch of a button ·Over 75 tip configurations available (T7 series tips) ·Once the temperature is set, it is "locked" into the system memory and can not be changed without the lockout key card ·Can be used with the Hakko FM-2024 desoldering tool Order # 94-895 (ea.) $249.00

703B Rework System

The Hakko 703B combines the best of Hakko's most versatile stations. The compact design of the dual soldering station and desoldering tool ensures optimal use of workspace. Features: ·Digital indicators for accurate temperature settings ·Independently adjustable temperature for both soldering and desoldering ·Soldering temperature: 400°~899°F ·Desoldering temperature: 662°~842°F ·One step change from °C to °F ·ESD safe by design Includes: ·Rework station, straight handle desoldering tool (807) with standard ø1.0mm diameter nozzle (A1003), two medium soldering irons (907ESD) with chisel tip Order # Mfr. # 94-742 703B Accessories 94-566 B1916 94-565 B1915 94-455 94-460 94-390 94-215 94-724 94-480 94-734 94-730 94-728 A1030 A1033 A1009 B1087 B1215 B1303 B1670 B2100 A1028 Description Rework system (ea.) $934.00

936 ESD Safe Soldering Station

The 936 soldering station is an inexpensive, compact station that you can stack to conserve valuable space. Features: ·Adjustable temperature control 392°F~896°F (200°~480°C) with lock/set screw ·Maintains idle temperature within 1.8°F (2°C) ·Ceramic heating element and sensor ensures rapid heat-up temperature (30 seconds) and lightning fast thermal recovery ·Temperature adjusted by simply turning dial ·Iron handles are insulated and ergonomically designed for ease and comfort ·A wide selection of tips available, see below ·ESD safe by design Order # 94-575 94-580 Mfr. # 936-12 C1148 Description Soldering station Iron (medium) (ea.) $84.95 95.93 (ea.) $5.39 6.29 5.39 5.39 5.39 6.39 6.39 6.19

493 Smoke Absorber

·Designed to remove noxious fumes quickly, safely, and efficiently ·The fan is fully adjustable, quiet, and efficient ·Filter is made by joining a specific urethane foam with refined, activated high absorption carbon ·ESD safe by design ·Mfr. #493-10 Order # 94-784 (ea.) $111.00

Replacement tips Order # Mfr. # 94-235 900M-T-B 94-300 900M-T-.8D 94-175 900M-T-1.2D 94-180 900M-T-1.6D 94-185 900M-T-2.4D 94-335 900M-T-S4 94-240 900M-T-I 94-245 900M-T-LB

Filter pipe (Filter pipe only) 5.59 Filter and ceramic paper 2.79 filter (Large) (Filter holder) Spring filter (10/pk) 10.95 Ceramic paper filter 8.99 (Large) (10/pk) Ceramic paper filter 5.89 (Small) (10/pk) Cleaning pin for nozzle 3.79 ø1.0mm (0.04") Cleaning pin for heating 4.99 element Cleaning drill for nozzle 15.90 ø1.0mm (0.04") Cleaning brush 13.57 Wrench 3.79 Grease 3.79

472D Desoldering Tool

Desoldering process control is made easy with the Hakko control card. Use the card to enter temperature settings into the system memory. When the card is removed, all parameter settings and the temperature setting are "locked" in the system memory. This not only provides strict process control but also guards against operators making inadvertent changes. The Hakko 472D provides a pencil-type desoldering tool with powerful suction power. Features: ·The output circuit is isolated from the power input and insulated transformer ·ESD safe by design ·Zero crossover switching on motor ·Adjustable temperature: 662°F~842°F ·110W Desoldering tool includes station, 807 desoldering iron and A1003 nozzle Order # Mfr. # 94-732 472D-1 Accessories 94-566 B1916 94-565 B1915 94-215 94-724 94-480 94-455 94-460 94-390 NET 30 Terms 94-726 94-728 94-730 94-734 B1087 B1215 B1303 A1030 A1033 A1009 B1095 A1028 B2100 B1670 Description Desoldering Tool (ea.) $519.00

A

851 SMD Rework Station

B

E

FM-202 Soldering Station

The FM-202 features Hakko's latest heating technology. The pulsing ceramic heating element delivers high thermal recovery. The FM-202 has many unique features including: ·Process Gate: Inserting the tip into the process gate ensures the accuracy of the soldering iron tip temperature ·Connector and grip: Ergonomic and replaceable grips, sleeve assembly slides over the tip and then the tip locks into the connector ·Lock out key card: Process control is maintained with the lock out key card ·Low tip temperature alarm: If the tip temperature drops below a preset setting an alarm sounds alerting the operator ·Long life tips: There are over 50 different standard tip configurations that operate between 400°~840°F Specifications: ·Power consumption: 75W ·Temperature range: 400°~840°F ·Temperature stability: ±9°F ·Output: 24V ·Mfr. #FM-202 Order # 94-820 (ea.) $650.00

440

Order Online

www.mcminone.com

Filter pipe (Filter pipe only) 5.59 Filter and ceramic paper 2.79 filter (Large) (Filter holder) Cleaning pin for nozzle 3.79 ø1.0mm (0.04") Cleaning pin for heating 4.99 element Cleaning drill for nozzle 15.90 ø1.0mm (0.04") Spring filter (10/pk) 10.95 Ceramic paper filter 8.99 (Large) (10/pk) Ceramic paper filter 5.89 (Small) (10/pk) Cleaning Pin Holder 4.69 Grease 3.79 Wrench 3.79 Cleaning brush 13.57

·Adjustable C temperature control from 212°F~1004°F ·The air volume D sensor has F an ultra-light setting ·ESD safe by design ·Ideal for soldering and desoldering of small surface-mounted chip components ·Power consumption: 85W Includes: Station, 80W hot air rework iron, iron holder, nozzle holder, and three nozzles (A1065, A1066, A1067). Fig. Order # Mfr. # Description (ea.) A 94-832 851 SMD Rework Station $689.00 Replacement Nozzles and Heating Element 94-834 A1068 80W/120V Heating element 23.50 B 94-836 A1065 Nozzle ø1.5mm (0.06") 21.75 C 94-838 A1066 Nozzle ø2.0mm (0.08") 21.75 D 94-840 A1067 Nozzle ø3.0mm (0.12") 28.50 E 94-842 A1147 Nozzle ø1.0mm (0.04") 33.97 F 94-844 A1344 Nozzle/dual single 134.00 bent ø1.0mm (0.04")

21

SMD Rework Station

The Hakko 852 SMD Rework Station features: ·Built­in vacuum pick-up ·Two modes of operation: Manual and auto (programmable process control) ·Digital temperature display ·Digital hot air dwell time display ·Airflow meter ·Self contained air source ·ESD safe by design ·Auto cool­down mode for safety ·The Hakko 852 includes station, 380W hot air rework iron (connected to station), hand piece holder, power cord, ø7.6mm pad (5/pk), and ø5.0mm pad (5/pk) Order # Mfr. # Description 94-762 852-3 SMD rework station Replacement Pads and Accessories 94-764 A1438 Pad ø7.6mm (5/pk) 94-766 A1439 Pad ø5.0mm (5/pk) 94-768 B2478B Foot switch for hands free operation (ea.) $1399.00 11.95 11.95 104.00

Solder Equipment

Section 21

808 Desoldering Tool

·Thin, easy-to-hold grip ·Low vibration ·Adjustable temperature control (380°~480°C/715°~895°F) ·Nozzle-ground potential difference of 2mV or less ·Nozzle-ground resistance of 2ohm or less ·Single pump maintenance ·Kit includes: ·808 desoldering tool, iron holder, and carry case.

950 SMD Hot Tweezer C1390C Omnivise

TM

·Holds boards easily, safely, and securely ·Unique design allows 360° use ·Five adjustable heights ·Can accommodate any board size ·Sold individually Order # 94-770 (ea.) $59.50

·Easily removes SMD chips and flat packs up to 25mm ·Direct heating, less effect upon surrounding components on surrounding boards ·The collet allows easy replacement of the tips ·Specially designed tool allows easy and precise tip alignment ·Compatible with Hakko 936, 937, 939, 702, 703, 926, 927, 928 stations Specifications: ·Power consumption: 24VAC/50W ·Temperature: 392°F~752°F ·Heating element: Ceramic Includes: ·SMD hot tweezer ·Heat resistance pad ·Tip alignment tool Order # Description 94-786 SMD Tweezer Replacement Parts 94-788 Tip/Chip 1L (2/pk) 94-790 Tip/Chip 2L (2/pk) 94-792 Tip/Chip 0.5C (2/pk) 94-794 Tip/Chip 0.5I (2/pk) 94-796 Tip/Sop 4L (2/pk) 94-798 Tip/Sop 6L (2/pk) 94-800 Tip/Sop 8L (2/pk) 94-802 Tip/Sop 10L (2/pk) 94-804 Tip/Sop 13L (2/pk) 94-806 Tip/Sop 15L (2/pk) 94-808 Tip/Sop 18L (2/pk) 94-810 Tip/Sop 20L (2/pk) 94-812 Tip/Sop 25L (2/pk) 94-814 Heating element 24VAC/50W (2/pk) 94-816 Iron holder w/ cleaning sponge 94-818 Cleaning sponge (ea.) $179.00 66.86 62.18 48.27 50.95 62.18 62.18 62.18 51.50 65.31 65.31 50.67 69.09 50.67 30.17 36.07 3.17

Order # 94-410 94-744 94-470 94-465 94-746 94-460 94-748 94-556 94-750 94-555 94-215 94-724 94-730

Mfr. # 808KIT C1099 A1234 A1229 A1267 A1033 B1725 A1217 B1747 A1042 B1087 B1215 B2100

C1392B Rework Fixture

·Rack and pinion action for smooth vertical motion ·Makes repetitive component removal and installation simple ·Delta theta capability allows the operator to align the nozzle to the component Order # 94-772 (ea.) $951.47

Description (ea.) Desoldering tool kit $174.00 Carry case 57.50 Heating element 45.75 Pre-filter set of 10 pcs. 5.59 Pre-0filter (aluminum) set 5.59 of 5 pcs. Ceramic paper filter (large) 8.99 (10/pk) Filter pipe 5.49 Front holder 2.76 Filter holder 4.22 Cleaning sponge 3.39 Cleaning pin for nozzle 3.79 Ø1.0mm (0.04") Cleaning pin for heating 4.99 element Wrench 3.79

Fig. 1

Fig. 2

Fig. 3

Replacement Nozzles

Replacement nozzles for Hakko models 470B, 471, 472B, 473, 702, 703, and 808 desoldering tools. Fig. 1 1 2 2 2 2 1 3 1 2 Order # 94-635 94-315 94-640 94-385 94-450 94-554 94-752 94-754 94-756 94-758 Mfr. # A1002 A1003 A1004 A1005 A1006 A1007 A1393 A1394 A1395 A1396 ØA 0.03" 0.04" 0.03" 0.04" 0.05" 0.06" 0.04" 0.04" 0.05" 0.09" ØB 0.07" 0.08" 0.09" 0.1" 0.12" 0.12" 0.055" 0.083" 0.083" 0.15" (ea.) $14.50 14.50 14.50 14.50 14.50 14.50 14.50 14.50 14.50 14.50

853 Preheater

·Compact design which measures only 5.5" (W) x 2.0" (H) x 6.7" (D) ·Fast heating ·Temperature range of 248°F~482°F (120°C~250°C) ·Excellent thermal stability ·Closed loop variable temperature control ·500W/120VAC ·ESD safe by design ·Mfr. #853 Order # 94-630 (ea.) $329.00

Heavy Duty Cleaning Pin

Precision swivel handle makes this tool quick and easy to use. Designed for cleaning tips on Hakko desoldering tools. Order # 94-425 (ea.) $17.95

21

Replacement Parts for Irons and Stations

Order # 94-210 94-215 94-547 94-558 Mfr. # B1085 B1087 599-029 B1304 Use with Model # 707 707 599/601 802/807/ 808/470/472 802/807/ 808/470/472 802/470/471 470/471 707 707 807/472/473 807/472/473 907-ESD 472/473 707/800M 800L/700C Description (ea.) Cleaning pin heater $4.99 Cleaning pin, 1.0mm 3.79 Cleaning wire 4.29 Cleaning drill 17.53 Cleaning drill 15.42 Order # 94-556 94-557 94-562 94-570 94-385 94-190 94-220 94-265 94-270 94-275 94-554 94-563 94-564 94-551 94-552 94-553 94-555 Use with Mfr. # Model # Description A1217 808 Holder, front A1304 807/472/473 Holder, front B1743 808 Housing C1147 907/936 Iron, medium A1005 470/471 Nozzle 483-T-1.0 707 Nozzle 0.039 ID 483-T-1.0T 483/707 Nozzle 10mm 483-T-.8 707 Nozzle 0.8mm 483-T-1.3 707 Nozzle 1.3mm 483-T-1.6 707 Nozzle 1.6mm A1007 702/703/808 Nozzle B1784 900M/907/913 Nut, enclosure B1786 900M/907/913 Tip enclosure 900M-T-3.2D 900M/907 Tip 3.2mm dia. 900S-T-1.6D 900S Tip 1.6mm dia. 900S-T-I 900S Tip A1042 631/632/ Sponge 936/937 (ea.) $2.76 2.79 34.17 69.95 14.50 19.25 19.25 26.17 23.26 19.25 14.50 3.79 3.79 5.39 7.49 10.24 3.39

Handi-Vac® Surface Mount Kit

The vacuum bulb is treated with Staticide. The probes are metal and the vacuum cups are electrically conductive to prevent charge generation. The Tenma Handi-Vac® kit is delivered to you with four vacuum cups and probes and a moistening sponge all packaged in a small plastic box. Order # 72-6183 (1-9 kits) $10.49 (10 kits-up) $9.44

94-559 B1305 94-568 94-390 94-170 94-280 94-565 94-566 94-567 94-400 94-195 94-548 C1054 A1009 481-021 707-002 B1915 B1916 B2024 A1174 483-012 800L-H

Desoldering gun 313.76 Filter, ceramic 5.89 Filter set, 10pcs. 12.75 Filter, pipe w/plastic 9.99 Filter holder 2.79 Filter pipe 5.59 Handle, iron 21.75 Heater element 64.95 Heater core 41.50 Heater, 60W 17.95

Fax 1-800-543-4330 1-800-765-6960 441 1-800-543-4330, FAX 1-800-765-6960

Order Toll Free Order Toll Free

Solder Equipment

Section 21

®

Vacuum Desoldering Station

1 YEAR LIMITED WARRANTY

®

®

Rework Station

Complete single­piece unit combines the benefits of a temperature controlled vacuum desoldering station, with a high quality temperature controlled soldering iron. Features: ·Closed loop temperature control ·Digital display ·Handles stay cool during prolonged use ·Rugged metal enclosure ·A variety of replacement tips available Vacuum desoldering iron: ·Efficient internal pump provides vacuum action ·Lightweight ergonomic gun handle ·Trigger pump activator ·Heat resistant detachable cord and vacuum tube ·Includes 1.0mm nozzle plus one spare ·Includes cleaning pins, replacement filters and filter tubes ·Temperature range: 410°F~900°F ·Heating element: 24VAC, 48W Temperature controlled soldering iron: ·24VAC, 48W heating element ·Temperature range: 320°F~900°F ·Heat resistant detachable cord ·Includes iron clad 3/64" conical tip, a variety of replacement tips are available ·Overall dimensions: 51/2" (H) x 81/4" (W) x 71/2" (D) ·Power requirements: 120VAC, 60Hz, 100W Order # 72-6345

®

Low cost temperature controlled station is ideal for all levels of board level rework and repair. Closed loop control and digital display provide accurate nozzle temperature setting, while the efficient internal pump provides vacuum action. Lightweight ergonomic gun type handle features trigger pump activator, and stays cool during prolonged use. Detachable cord and vacuum tube are heat resistant and measure 45" in length. Rugged metal enclosure has convenient carry handle and iron holder may be attached to either side for left or right hand operation. Unit comes complete with replacement nozzle, cleaning pins, replacement filters and filter tubes. Additional replacement components and a variety of nozzles are available separately. Specifications: ·Temperature range: 410°F~900°F ·Heating element: 24VAC, 48W ·Dimensions: 6" (H) x 81/4" (W) x 6" (D) ·Weight: 4.5 lbs. ·Power requirements: 120VAC, 60Hz 50W Order # 72-6340 A B C (ea.) $299.00

®

1 YEAR LIMITED WARRANTY

Hot Air SMD Rework Station

Features: ·Wide range adjustment of hot air temperature and air volume provides soldering and desoldering of most surface mount devices ·ESD safe grounded design ·Auto cooling system after power off ·Wide varity of nozzles available for soldering and desoldering of most surface mount devices including QFP, SOP and PLCC packages ·Hot air temperature adjustable from 212°F~754°F ·Includes QFP 17.5 x 17.5 nozzle (#72-6713) and owners manual ·Dimensions: 71/2" (W) x 53/8" (H) x 93/4" (D) ·Weight: 9.9 lbs. ·Power requirements: 110/120VAC Order # 72-6710 72-6711 72-6712 72-6713 72-6714 72-6715 72-6716 72-6717 72-6718 72-6720 72-6721 72-6723 72-6724 72-6725 72-6726 Description Hot Air SMD Rework Station Nozzle QFP 10 x 10 Nozzle QFP 11 x 11 Nozzle QFP 17.5 x 17.5 Nozzle QFP 14 x 20 Nozzle QFP 28 x 28 Nozzle SOP 4.4 x 10 Nozzle SOP 5.6 x 13 Nozzle SOP 7.5 x 15 Nozzle PLCC 17.5 x 17.5 Nozzle PLCC 20 x 20 Nozzle PLCC 30 x 30 Nozzle Single 2.5mm Nozzle Single 4.4mm Replacement heater (ea.) $449.00 63.62 63.62 74.22 74.22 86.93 63.62 63.62 63.62 74.22 84.83 95.43 26.55 26.55 26.55

(ea.) $449.00

(2­up) $425.00

Desoldering Station Replacement Parts

·Replacement parts for the Tenma #72-6340 and 72-6345 rework stations ·Glass tube measures 115/16" (L) x 13/16" (O.D.) ·Filter set consists of one steel wool filter and one cotton disk filter "O" ring kit contains two rubber "O" rings, each 13/16" (O.D.) Fig. A B C Order # 72-6408 72-6409 72-6411 Description Replacement glass tube Filter set "O" ring set (ea.) $1.99 0.75 0.49 (2-up) $1.89 0.00 0.45

Replacement Desoldering Gun

Replacement for Tenma #72-6340 and #72-6345 rework stations. 45" heat resistant cord is terminated with compatible five-pin connector. Includes 24V, 48W heating element, filters, 45" vacuum tube and 2.0mm nozzle. Order # 72-6406

®

A

C

A

B C

D

(ea.) $39.95

(2-up) $37.95 B

®

D

21

Replacement Heating Element

Replacement desoldering element for Tenma #72-6340 and #72-6345 rework stations. Four-wire design includes connections for 24V, 48W element and integral temperature sensor. Ideal for replacing damaged elements, or upgrading older stations to accept the new, shorter length nozzles. Includes 2.0mm nozzle. Order # 72-6407 (ea.) $14.95 (2-up) $14.19 NET 30 Terms

Solder Station Accessories

Replacement accessories are compatible with the soldering iron on the Tenma #72-6345 Rework Station, as well as older Model #21-147 and #21-1590 soldering stations. #21-151 Grounded Replacement Iron utilizes a five­pin DIN plug and is compatible with Tenma #21-147 and #21-1590 stations. The #72-6345 Replacement Iron utilizes a four­pin screw­on connector and is compatible with the #72-6345 rework station. All other accessories are interchangeable. Fig. Order # A 21-148 B 21-925 C 21-926 D 21-927 21-151 E Description (1­9) (10­24) (25­up) Conical tip $2.69 $2.36 $2.15 Long conical tip 2.69 2.36 2.15 Screwdriver tip 2.69 2.36 2.15 Long screwdriver tip 2.69 2.36 2.15 Replacement iron 12.08 11.50 10.76 (5­pin DIN connector) 72-6346 Replacement iron 14.95 13.50 12.00 (4­pin connector) 21-585 Solder sponge 1.18 0.97 0.86 (#21-147, #21-1590 only)

Desoldering Station Replacement Nozzles

E

Replacement parts designed specifically for use with the Tenma #72-6340 and #72-6345 rework stations. Sizes are available with tip diameters from 0.8mm~2.0mm. Overall length of all nozzles is 7/16". Note: Desoldering stations with heating elements utilizing older style nozzles, (nozzles with overall length of 17/8"), are not compatible with those listed below. These nozzles require the purchase of an updated heating element, model #72-6407. Fig. A B C D E Order # 72-6863 72-6864 72-6865 72-6866 72-6867 Description 0.8mm nozzle 1.0mm nozzle 1.2mm nozzle 1.5mm nozzle 2.0mm nozzle (ea.) $4.99 4.99 4.99 4.99 4.99 (2­up) $4.75 4.75 4.75 4.75 4.75

442

Order Online

www.mcminone.com

A

C

Solder Equipment

Section 21

B

®

D

®

Soldering Iron with Cover

·30W iron is perfect for general purpose wiring and PC board use ·Included screw on tip cover protects iron and tools, eliminates need to allow iron to cool prior to storage ·Silicon insulated power cord is heat and solvent resistant ·Tapered handle stays cool and is easy to grip ·Overall length approximately 9" ·Variety of replacement tips available, conical tip supplied (#21-8170) Order # 21-8120 (1­9) $3.99 (10­up) $3.39

Replacement Soldering Iron Tips

E ·Specifically designed for use with Tenma ceramic heating element soldering irons and stations ·Five styles to suit a variety of soldering needs ·Sold individually ·Compatible stations: #21-7930, 21-7935, 21-7950 and 21-7955 ·Compatible pencil irons: #21-8125, 21-8140 and 21-8150 Fig. A B C D E Order # 21-7980 21-7981 21-7982 21-7983 21-7984 Type (1-9) Conical $1.99 Micro point 1.99 Chisel point 1.99 Micro chisel point 1.99 Long conical 1.99 A D (10-24) (25-49) $1.79 $1.59 1.79 1.59 1.79 1.59 1.79 1.59 1.79 1.59 G

®

Fast Heat/Recovery Soldering Iron

·20W iron features 130W "boost" for fast warm up and recovery when required ·Perfect when general purpose wiring and PC board soldering includes the occasional larger connection ·Momentary push­button on the handle provides added power ·Ceramic heating element ensures consistent, reliable heating ·Silicon insulated power cord is heat and solvent resistant ·Tapered handle stays cool and is easy to grip ·Overall length approximately 9" ·Variety of replacement tips available, conical tip supplied (#21-7980) Order # 21-8145 (1­9) $8.99 (10­up) $7.65

®

B

E

H

12VDC Soldering Iron with Cover

C

F

J

®

Replacement Soldering Iron Tips

·Specifically designed for use with Tenma pencil soldering irons as listed ·Three styles to suit a variety of soldering needs ·Sold individually Fig. Order # Type (1-9) (10-24) (25-49) Use with Model #21-8120, 21-8130 A 21-8170 Conical $0.99 $0.89 $0.79 B 21-8171 Small chisel point 0.99 0.89 0.79 C 21-8172 Chisel point 0.99 0.89 0.79 Use with Model #21-8135 D 21-8175 Conical 0.99 0.89 0.79 E 21-8176 Small chisel point 0.99 0.89 0.79 F 21-8177 Chisel point 0.99 0.89 0.79 Use with Model #21-8140 G 21-8180 Conical 0.99 0.89 0.79 H 21-8181 Small chisel point 0.99 0.89 0.79 J 21-8182 Chisel point 0.99 0.89 0.79

·12VDC iron includes an attached cigarette lighter plug ·Perfect for automotive installation and field use ·30W element is perfect for general purpose wiring and PC board use ·Ceramic element ensures consistent, reliable heating ·Red LED in the handle indicates power ·Included screw on tip cover protects iron and tools, eliminates need to allow iron to cool prior to storage ·Silicon insulated power cord is heat and solvent resistant ·Tapered handle stays cool and is easy to grip ·Overall length approximately 9" ·Variety of replacement tips available, conical tip supplied (#21-7980) Order # 21-8150 (1­9) $4.99 (10­up) $4.25

®

25W Precision Soldering Iron

·Ideal for small connections and general purpose PC board soldering ·Smooth tapered handle includes rubber grip for easy holding and less fatigue ·Ceramic heating element ensures consistent, reliable heating ·Silicon insulated power cord is heat and solvent resistant ·Overall length approximately 8" ·Variety of replacement tips available, conical tip supplied (#21-7980) Order # 21-8125 (1­9) $4.99 (10­up) $4.25

®

Soldering Iron Holder

·Metal base measures 31/2" (W) x 51/4" (D) ·Includes tip cleaning sponge ·Metal sleeve holder and spring support hold irons up to 3 /4" diameter ·Compatible with Tenma #21-8120, 21-8130, 21-8135 and 21-8140 Order # 21-8160 21-8161 Description Holder Replacement sponge 38mm x 56mm (1­9) $2.99 0.99 (10­up) $2.55 0.89

®

General Purpose Soldering Irons

®

Replacement Tip Cleaning Sponges

·Specific sizes designed for Tenma Stations, ideal for use with any soldering equipment ·Heat resistant material is unaffected by soldering iron temperature ·Clean soldering iron tips are essential for maximum life span and effective soldering ·Sold individually Order # 21-7985 21-7986 21-7987 21-7988 21-8161 Tenma Station 21-7930, 21-7935, 21-7950 21-7940 21-7945 21-7955 21-8160 Dimensions (1­9) (10­24) (25­49) 75mm x 45mm $0.99 $0.89 $0.79 68mm x 65mm 98mm x 55mm 58mm x 37mm 56mm x 38mm 0.99 1.79 0.99 0.99 0.89 1.61 0.89 0.89 0.79 1.43 0.79 0.79

®

These no­nonsense general purpose irons are ideal for daily or occasional use on the service bench, the tool box, in the field, the lab or the classroom. Three different wattages ensure a model is available for most applications. ·30W for small connections and general purpose PC board assembly or repair ·40W for larger connectors, including spade and ring terminals, nylon Molex type and wire splices up to 14AWG ·60W for large spade and ring terminals, heavier gauge automotive wiring, and power supply connections ·Tapered handle includes ridged finger grip, and is textured for easy holding ·Silicon insulated power cord is heat and solvent resistant ·Overall length approximately 9" ·Variety of replacement tips available, conical tip supplied Order # 21-8130 21-8135 21-8140 Watt 30 40 60 (1­9) $4.99 5.99 7.99 (10­up) $4.25 5.09 6.79

21

Soldering Iron Holder

·ABS base, with metal insert measures 3" (W) x 6" (D) ·Includes tip cleaning sponge ·Rubber non­skid feet hold unit firmly in place ·Metal spring holder includes ceramic insert to keep holder cool ·Holds irons with up to 1/4" diameter heating element ·Compatible with Tenma ceramic heating element models including #21-8125, 21-8145 and 21-8150 Order # 21-8165 21-7986 Description Holder Replacement sponge 68mm x 65mm (1­9) $4.99 0.99 (10­up) $4.25 0.89

Six Piece Soldering Aid Kit

·Specialized tools for soldering ·Includes brush/scraper, brush/reamer, fork/reamer, hook/remover, hook/lifter, scraper/curved point Order # 22-3790 (kit) $4.19 (2 kits-up) $3.69

Fax 1-800-543-4330 1-800-765-6960 443 1-800-543-4330, FAX 1-800-765-6960

Order Toll Free Order Toll Free

Solder Equipment

Cordless Soldering Iron Kit

2000 Cordless Rechargeable Soldering Iron

·"Quick Charge" ISO-TlP recharges in 3~41/2 hours ·A partially discharged battery returns to full capacity in an hour or two ·Long lasting, premium quality, nickel cadmium battery withstands high-rate charging without damage ·Fully charged unit can make up to 125 solder joints per charge ·5~10 seconds average soldering heat time ·Built-in worklight ·#21-130 kit contains cordless soldering iron, recharging stand, tips #21-132 and 21-134, and instructions Order # 21-130 Order # 21-132 21-134 21-3295 (ea.) $54.95 (5-9) (10-up) $5.80 $5.74 5.80 5.74 19.50 18.95 ·Fully recharges in six hours ·Up to 125 solder joints per charge during continuous use ·Tip temperature reaches 900°F in less than ten seconds ·Isolated ceramic tip design eliminates damaging electrical leaks ·Convenient lighted iron illuminates work environment ·Contains iron, charging stand with wall plug transformer, battery, fine tip, chisel tip, and instructions Order # 21-6755 (ea.) $50.91

Section 21

Cold Heat Cordless Soldering Iron

Advanced technology allows the soldering tip to heat and cool instantly for safer, more efficient metal bonding. Iron is ideal for light duty electronic soldering. Features: ·Reaches 800°F in 0~1 seconds, cools to room temperature in 2 seconds or less ·Built-in LED work light ·Ergonomic design fits right or left hand ·Uses four "AA" batteries not included (#292-020) Order # 21-8246

®

Description Thin replacement tip Wide replacement tip Replacement battery for gray iron

(1-4) $5.95 5.95 19.95

"60" Cordless Soldering Iron

·Fully recharges in one hour, the fastest on the market ·Automatically changes to an energy-saving, trickle-charging rate when battery becomes full ·Solders up to 125 electronic joints ·Contains iron, charging stand with plug transformer, battery (#21-4528), chisel tip (#21-4545), fine tip (#21-132) and instructions

(ea.) $29.95

Power Pro Cordless Soldering Iron

·High-capacity battery provides up to 30 minutes of continuous soldering ·Solders over 200 electronic joints ·Full recharge in four hours ·Tip performance up to 900°F ·LED charging indicator light ·Contains iron, charging stand with wall plug transformer, battery (#21-4529), fine tip (#21-132), chisel tip (#21-4545) and instructions Order # 21-4525 (ea.) $67.95

SMD Soldering/ Desoldering Tweezers

·Provides a fast, efficient method to solder and desolder surface mount devices such as chip resistors, chip capacitors, SOTs, flat pack and DIP ICs ·Dual highly insulated 40W ceramic heating elements insure rapid heat up and recovery ·Wide variety of interchangeable tips available in 2mm to 30mm widths ·Heat resistant silicon cord is terminated with three pin grounded AC plug Order # Size SMD Tweezers 21-8230 ­ Replacement Tip Sets 21-8190 2mm 21-8191 3mm 21-8192 5mm 21-8195 10mm 21-8196 15mm 21-8197 20mm 21-8198 30mm (1-9) $29.95 0.99 0.99 0.99 1.49 1.49 1.49 1.49 (10-up) $25.50 0.89 0.89 0.89 1.35 1.35 1.35 1.35 Order # 21-4528 21-4529 21-4537 21-4538 21-4543 21-4544 21-4545

Order # 21-4524

(ea.) $65.05

Hi-Efficiency Replacement Tips

These high efficiency replacement tips easily snap in and out of all Iso-Tip rechargeable soldering irons including MCM #21-130, 21-4524, 21-4525, and 21-6755. Tips reach soldering temperature in less than ten seconds and reach a tip temperature of 900°F. These high efficiency replacement tips heat up faster and last 20% longer than Iso-Tip standard tips. Recommended for longer soldering time. Order # 21-6695 21-6700 21-6705 21-6710 21-6715 21-6720 Description /32", regular tip /16", fine tip 3 /16", heavy duty tip 1 /64", micro soldering tip 5 /32", chisel tip 3 /32", beveled tip

5 1

Cordless Iron Accessories

Description Replacement battery for #21-4524 Replacement battery for #21-4525 1 /16" long life tip 1 /64" long life tip 5 /32" standard tip 1 /64" standard tip 3 /16" hi-efficiency tip (ea.) $19.04 19.04 9.14 9.00 5.69 5.69 5.69

(1-9) $5.34 5.34 5.34 5.34 5.34 5.34

(10-up) $4.82 4.82 4.82 4.82 4.82 4.82

2­in­1 Dual Wattage Soldering Iron

·This unique high quality soldering iron is actually two soldering irons in one ·Choose desired wattage of 15W and 30W ·Very quick heat­up time ·Includes standard conical tip Order # 21-7475 (ea.) $10.87

40 Watt Soldering Pencil

·Light weight design for work efficiency ·Super quick heat-up and heat recovery ·Simple tip replacement (use #21-4341) Order # 21-4340 (ea.) $7.20

1 YEAR LIMITED WARRANTY

EZ Change Cordless Soldering Iron

The versatile EZ Change cordless soldering iron gives you the power of an industrial iron using standard rechargeable nickel cadmium batteries; Extended soldering times; Up to 125 electronic joints per charge; Tip protector and compartment for extra tips; and allows you to recharge batteries in any standard NiCd charger (MCM #21-6810). Features include: ·Complete portability ·Extended run time ·Multiple battery options ·Up to 900°F in just 10 seconds ·Insulated tip design to prevent damaging electrical leaks ·DC soldering equivalent of a 25W AC unit ·Contains industrial quality EZ change iron, fine tip (#21-132), two "C" rechargeable nickel cadmium batteries, tip protector, and instructions Order # 21-6805 Replacement tips Order # Description 21-4543 Regular tip, 5/32" diameter 21-132 Fine tip, 1/16" diameter 21-134 Heavy-duty tip, 3/16" diameter 21-4544 Micro soldering tip, 1/64" diameter 21-4545 Chisel tip, 5/32" diameter (kit) $34.95 (ea.) $5.69 5.95 5.95 5.69 5.69

21

Anti­Seize Compound

·Specially formulated lubricant to prevent tip thread seizure when operating at high temperatures ·Ideal for use at 900°F or lower ·1/2 oz. tube Order # 96-1720 (ea.) $5.69 NET 30 Terms

High Wattage Soldering Pencil

·Stainless elements ensure long-lasting protection from corrosion ·Very quick heat-up time ·Light weight design for work efficiency Order # 21-4345 21-4350 Description 80W soldering pencil 100W soldering pencil (ea.) $8.23 10.29

444

Order Online

www.mcminone.com

Solder Smoke Absorber

·A must for every service technician that regularly performs soldering repair work ·Designed to quickly filter noxious gases, fumes and harmful smoke ·Absorbs smoke, filters and cleans air ·Filter is easily replaced ·High performance fan ·Fully adjustable ·Replacement filter available (#72-5035) ·Dimensions: 63/8" (W) x 77/8" (H) x 43/4" (D) Order # 72-5030A 72-5035 Description Smoke absorber Replacement filter (1-9) $73.45 10.59 (10-up) $66.10 9.53

Solder Equipment

Section 21

High Performance Soldering Iron

·Light weight design ·Available in 25W (850°F) and 40W (900°F) ·UL approved ·Includes tip and safety stand Order # 21-4960 21-4965 21-4970 21-4975 Description (ea.) 25W soldering iron w/conical tip (#21-4965)$7.37 Conical tip for #21-4960 2.00 40W soldering iron w/conical tip (#21-4975) 7.94 Conical tip for #21-4970 2.00

#21-980 #21-8424 #21-940

®

#21-8425 #21-8426

Soldering Stand

·Heavy-duty metal base ·Sponge receptacle ·Holds up to 11/8" diameter iron Order # 21-180 #21-160

®

Benchtop Fume Absorbers

·Aerodynamic hood design effectively draws irritating soldering fumes away from the work area ·Carbon-impregnated filters trap a limited portion of the flux fumes ·Compact size, low profile and adjustable stand allows convenient placement 6" to 8" from work area ·Articulating arm (#21-8426 and 21-8427) allows optimized positioning and saves bench space ·ESD safe versions (#21-8425 and 21-8427) with static-dissipative housing ·SA-9 series include fume absorber and three filters ·SA-90 series include fume absorber, articulating arm, mounting bracket, and three filters Description (ea.) Benchtop fume absorber, $105.00 115VAC 21-8425 SA-9-E-115 ESD safe benchtop fume 139.00 absorber, 115VAC 21-8426 SA-91 Fume absorber 219.00 w/articulating arm, 115VAC 21-8427 SA-91-E ESD safe fume absorber 239.00 w/articulating arm, 115VAC 21-8428 SAF-1 Replacement filter set (3/pk) 19.95 Order # Mfr. # 21-8424 SA-9-115

#21-780

(1-9) $7.25

(10-24) $6.16

(25-49) $5.61

#21-170

®

Soldering Pots Soldering Irons

(10-24) (25-49) $22.18 $20.82 8.86 6.58 6.95 4.97 7.89 5.93 6.31 4.42 Compact soldering pots are ideal for small scale production, prototyping and chassis wiring. They are especially useful when tinning large quantities of stranded wire. Recommended for use with the Tenma #72-6309 bar solder. Available in 150W and 400W sizes, both models require 110VAC, 50~60Hz. Order # 21-3511 21-3515 Inside Dimensions 1.5" (dia.) x 1.5"(D) 3.1" (dia.) x 1.5"(D) Wattage (1-9) 150W $24.95 400W 73.45 (10-up) $23.50 68.20

Order # Type (1-9) 21-980 16-30W $22.98 adjustable iron 21-940 25W 3 wire iron 9.94 21-780 25W/12V iron 7.56 21-160 25W high 8.02 performance iron 21-170 30W pencil type iron 5.83

®

Replacement Tips for Tenma Irons

Order # 21-1025 21-1030 21-1035 21-435 21-1065 21-595 21-4341 (Tenma iron #) (21-980) (21-980) (21-980) (21-940, 21-160) (21-945) (21-590) (21-170) Type (1-9) (10-24) Conical $4.48 $3.94 Screwdriver 4.48 3.94 Long screwdriver 4.48 3.94 Conical 2.36 1.94 Conical 4.05 3.28 Replacement tip 2.29 1.85 Replacement tip 2.14 1.71

Heavy Duty Soldering Gun

·Quick heat-up time of 6~8 seconds ·Pilot lamp ·Compact, lightweight, comfortable pistol grip design ·Heavy duty case DAY LIMITED design for the WARRANTY most rugged application ·High low temperature switch allowing temperature selection of either 80W or 60W.

Bench Top Fume Extractor

·Powerful 12VDC fan motor draws fumes away ·Ultraquiet operation ·Dual filtration with charcoal impregnated rear filter and rotating front filter provides filtration 8x better than a stationary filter ·Bright front (green) and rear (yellow) LEDs, indicate power and flow direction ·Adjustable to almost any working angle ·Low static, ESD safe ·Dimensions: 5.5" (W) x 12" (H) x 5.5" (D) Order # 21-4694 21-4695 Mfr. # FXF11 XF01 Description Fume extractor Replacement filter set (ea.) $135.45 13.93

90

21

Dash Soldering Irons

·Compact, lightweight design with a slender handle for a more comfortable grip ·High-quality long lasting ceramic type heater ·Heating element is sealed from air eliminating oxidation and ensuring longer life ·Available in 15W (698°F), 20W (788°F) and 25W (842°F) versions ·Tip included Order # Description Mfr. # 94-100 15W N452JN-V12 94-125 20W N453JN-V12 94-130 25W N454JN-V12 Tips For Dash Soldering Irons Order # Hakko # Type Iron # 94-105 N452-T-4C Bevel tip 452/453 94-110 N452-T-B Conical tip 452/453 94-120 N452-T-SD Micro chisel tip 452/453 94-135 N454-T-4C Bevel tip 454 94-140 N454-T-B Conical tip 454 94-145 N454-T-D Chisel tip 454 94-150 N454-T-I Micro conical tip 454 (ea.) $34.95 44.95 32.95 (ea.) $5.49 5.49 6.38 7.99 5.99 7.49 5.99

Order # 21-4330 Replacement tip for #21-4330 Order # 21-4335

(ea.) $12.35 (ea.) $2.08

Solder Aid Kit

·Six piece kit includes heat sink, self-closing tweezers, small Phillips screwdriver, brush/scraper, pointed/slotted probe and curved point/scraper Order # 21-665 (1-9 kits) $4.75 (10 kits-up) $4.32

Econo Soldering Iron Kit

·Lightweight design for ease of use Kit includes: ·40W solder iron, replacement tip, and desoldering wick Order # 94-530 Mfr. # P508-1 (kit) $13.25

Fax 1-800-543-4330 1-800-765-6960 445 1-800-543-4330, FAX 1-800-765-6960

Order Toll Free Order Toll Free

Solder Equipment

Section 21

Micro Jet Butane Torch with Flame Control

·Great for soldering, electronic repairs, spot heating, heat shrink tubing, or any application where an instant heat source is needed ·Instant 2500°F micro flame ·Wind proof ·Water resistant ignition ·Auto ignition safety lock ·20 minutes of burn time per fuel tank ·Powered by refillable butane cartridge (included) Order # 21-8100 (ea.) $12.95

Handy TorchTM Butane Torch

·Piezo electronic ignition ·30 minute run time ·Torch temperature: 2500°F ·Ready instantly ·Wind proof flame and water proof ignition ·Compact size Order # 21-8400 (ea.) $9.29

8200PK Universal Soldering Gun Kit

·All-purpose gun with trigger selectable high (140W) or low (100W) heat ·Ready to solder in six seconds ·Built-in light illuminates work area ·Balance pistol-grip design ·Soldering gun packed in plastic case with one soldering tip, one sealing tip, one cutting tip, flux brush, soldering aid tool, coil or 40/60 rosin core solder and soldering hints booklet ·UL listed Order # 96-065 (kit) $49.95 (2-4 kits) $47.36

Butane Soldering Iron Kit

·4-in-1 use includes soldering from 410~850°F (20 seconds), hot knife from 410~850°F (20 seconds), torch up to 2500°F (instant), heat blower up to 1300°F (10 seconds) ·Operating time up to 120 minutes ·Equivalent to a 25~80W corded soldering iron Kit includes: ·Butane soldering iron ·Protective cap with igniter ·1mm conical tip ·Torch-tip ·Hot blower tip ·Hot knife tip ·Solder ·Wiping sponge ·Stand ·Carry case Order # 21-8395 (kit) $49.95

Versa-TorchTM Professional Butane Torch

·Run time of 220 minutes per full tank ·Piezo ignition ·Built-in stand allows for hands-free operation ·Great for welding, soldering, electronic repairs, and material bending ·Adjustable flame control 2500°F ·Adjustable air flow control valve ·Adjustable gas flow control valve ·Safety kill/off switch ·Refills with butane fuel (not included) Order # 21-8105 (ea.) $43.95

Lighted Marksman Soldering Iron Kit

·A neon light in the handle of this soldering iron gives the user a quick indication that the iron is on ·Ideal for hobbies, kits, radios, and electronics work ·Featherweight iron with pencil handle ·Stainless steel barrel ·Heat and impact resistant handle ·UL listed Kit includes: ·25W (750°F) ·SP23L iron, MT1 (cone shaped tip), MT2 (screwdriver tip), MT3 (chisel tip), lead free solder, and soldering aid tool Order # Mfr. # Description (1-4 kits) (5 kits-up) 96-1505 SP23LK Kit $21.98 $21.32 96-1500 SP23L 25W (750°F) iron and 15.73 15.26 MT1 (cone shaped tip) 96-1510 SP40L 40W (900°F) iron and 21.02 20.39 MT10 (chisel tip) 96-2060 SP80L 80W (900°F) iron and 33.82 MT620 (chisel tip)

Butane Torch with Flame Control Valve

·Built-in stand allows for hands-free operation ·30 minutes of burn time per full tank ·Great for welding, soldering, electronics repairs, and material bending ·Adjustable flame control 2500°F ·Wind proof ·Safety lock switch prevents unintended use ·Refills with butane fuel (not included) Order # 21-6280 (ea.) $22.95

Butane Soldering Iron and Torch

·30W~70W performance equivalent to a corded soldering iron ·Soldering temperature 410°F~750°F ·Torch temperature 2500°F ·Operating time up to 30 minutes ·Refills with butane fuel (not included) ·Includes 1mm conical tip and torch attachment Order # 21-8110 (ea.) $19.95

Tip Cleaner

·Cleans tip quickly without reducing tip temperature ·Cleans better than conventional sponges ·May also be used as portable soldering pencil holder ·Non-skid base Order # 21-4355 (ea.) $7.95

Self-Igniting Pocket Torch

·Lightweight, hand held gas powered torch ·Refillable cartridge ·Adjustable flame ·Blow torch up to 2372°F (1300°C) ·Burns 20 minutes on a full cartridge ·Butane gas not included Order # 21-4636 (1-4) $9.72 (5-up) $8.75

21

605M Iron Holder

Insulated holder is designed for 605 series soldering iron. Will work with any iron having a 1/2" diameter barrel less than 4" long. Eliminates the need to allow iron to cool before storage, saving time and eliminating risk of damage to other tools. Order # 94-430 (ea.) $7.59

Tips for Marksman® Soldering Irons

·Nickel­plated tips are available in a wide variety of styles ·MTG tips are iron­plated for heavy­duty soldering irons Order # 96-100 96-1530 96-1531 96-1532 96-1536 96-105 96-095 96-1537 96-1538 96-1539 96-1540 96-1541 96-115 Mfr. # MT1 MT2 MT3 MT5 MT9 MT10 MT70 MTG20 MTG21 MTG22 MTG30 MTG40 HK11 Description Conical tip, 2/pk Screwdriver tip, 2/pk Chisel tip, 2/pk Wood burning tip, 1/pk Wood burning tip, 1/pk Chisel tip, 2/pk Conical tip, 2/pk Chisel tip, 1/pk Chisel tip, 1/pk Conical tip, 1/pk Chisel tip, 1/pk Chisel tip, 1/pk Blade and chuck, 1/pk (pkg.) $4.59 4.59 4.59 4.46 4.46 8.39 4.59 8.39 8.39 9.38 12.01 20.54 7.87

Soldering Aid

Tool is made from static dissipative, heat resistant material. Used for scraping, molten solder guiding, component removal, etc. Length 150mm. Order # SAITS800 (1-24) $5.24 (25-up) $4.71

Presto Soldering Gun

·For light to medium duty soldering ·Dual wattage feature for occasional heavy duty applications ·Gun type handle for comfort ·20W/130W ·Mfr. #P981-V12 Order # 94-505 (ea.) $49.00

NET 30 Terms

446

Order Online

www.mcminone.com

Solder Equipment

WP Series Professional Soldering Irons

Three wire grounded irons are ideal for professional service, hobby applications or light electrical work. Iron plated tip and stainless steel construction offer longer tip life. Lightweight cushioned handle stays cool, even after hours of use. Replacement tips and heating elements are available. Order # Mfr# Description (ea.) (2-4) (5-up) 96-305 WP25 25W iron $44.95 $40.88 $40.03 96-429 WP30 30W iron 47.95 44.17 43.26 96-430 WP35 35W iron 54.95 51.46 50.40 Replacement parts for WP series irons 96-1255 HE25 Heater for WP25 24.95 96-1256 HE30 Heater for WP30 27.95 96-1257 HE35 Heater for WP35 27.95 -

Section 21

Portasol Cordless Soldering Kit

·Ideal for service technicians to solder, heat shrink, and cut rope ·Butane fuel level is visible through a window ·Built-in fuel filter reduces contaminated fuel problems ·Auto switch safety shut off on cap ·Operates up to two hours per refill ·Temperature is fully adjustable ·Maximum temperature of 1076°F/580°C ·Kit contains: PSI-100 iron, sponge, stand and extra tips packed in a plastic case Order # Mfr. # Description (ea.) 96-1085 PSI100K Cordless soldering iron kit $79.95 Replacement parts for PSI100K 1 96-1236 PSI1 /32" flat tip 12.08 3 96-1237 PSI2 /32" flat tip 12.08 1 /8" flat tip 12.08 96-1238 PSI3 1 96-1240 PSI5 /32" chisel tip 12.08 3 96-1241 PSI6 /32" chisel tip 12.08 1 96-1242 PSI7 /8" chisel tip 12.08

Cordless Soldering Tool with Piezo Self-Ignitor

Features: ·Safe, no open flame ·Super fast heat-up lets you melt solder in under a minute ·Lasts up to one hour of continuous use on one refill ·View window lets you see how much fuel you have left ·Tip retainer releases in just two turns making tip changeout quick and easy ·Adjusts from the equivalent of 25 to 75W for temperatures up to 850°F Kit contains: ·Portasol soldering tool with PPT6, PPT12, PPT10, PPT9, and PPT11 tips ·Sponge and tray ·Storage case with tool holder Note: ·Butane fuel required Order # 96-1985 96-1990 Mfr.# P2KC P2C Description Soldering tool kit Soldering tool only with 3/32" double flat soldering tip Single flat 1/32" tip Single flat 3/32" tip Single flat 1/8" tip Single flat 3/16" tip Double flat 1/32" tip Double flat 3/32" tip Double flat 1/8" tip Hot air tip Hot knife tip Hot air deflector tip Flame tip Hot air and deflector tip (ea.) $64.95 39.95 9.49 9.49 9.49 9.49 9.49 9.49 9.49 9.49 9.49 6.49 9.49 14.99

"ST" Series Tips for WP Professional Soldering Irons

·Tips compatible with the WP25, WP30, WP35, WP25P, WP40P irons; WLC100 solder station ·Precision ground copper tips are plated with iron, nickel, and chromium ·Sold individually Order # 96-310 96-1564 96-315 96-1565 96-320 96-1566 96-1567 96-325 Mfr. # ST1 ST2 ST3 ST4 ST5 ST6 ST7 ST8 Description Screwdriver tip Screwdriver tip Screwdriver tip Screwdriver tip Single flat tip Screwdriver tip Conical tip Narrow SD tip (ea.) $5.76 5.76 5.76 5.76 5.76 5.76 5.76 5.76

WST2 Pyropen® Jr.

Order # Mfr. # Description (ea.) (2-4) (5-up) 96-330 WSTZ Pyropen® Jr. $100.11 $97.11 $95.10 Replacement parts for WSTZ 96-1562 WHC-54 Hot air tip 19.60 96-1281 WP71-07 Ejector 20.30 -

Replacement Tips 96-1995 PPT1 96-2000 PPT2 96-2005 PPT3 96-2010 PPT4 96-2015 PPT5 96-2020 PPT6 96-2025 PPT7 96-2035 PPT9 96-2040 PPT10 96-2045 PPT11 96-2050 PPT12 96-2055 PPT13

Professional Quality Butane Fuel with Fuel Tip Cleaner Controlled Output Soldering Irons

·Uses the Weller "closed loop" method of controlling maximum tip temperature ·Lightweight and portable­no base station required ·Stainless steel modular plug­in heater provides greater efficiency and versatility ·Temperature is controlled by the tip, 600°F, 700°F, and 800°F tips available ·Nominal heat­up time with 700°F tip is 110 seconds ·Available with a three­wire ground cord set ·Each iron comes complete with a 700°F tip ·120VAC Order # Mfr. # Wattage/Cord (ea.) 96-1722 W60P 60W/2-wire $79.95 96-1724 W60P3 60W/3-wire 87.95 96-1726 W100P3 100W/3-wire 89.95 Replacement tips for 60W irons (MCM #96-1722, #96-1724) Order # Mfr. # Description (ea.) 96-1730 CT5C7 1/8" screwdriver tip, 700°F $7.29 1 96-1732 CT5A7 /16" screwdriver tip, 700°F 7.29 1 96-1734 CT5E8 /4" screwdriver tip, 800°F 7.29 1 96-1736 CT5C8 /8" screwdriver tip, 800°F 7.29 1 96-1738 CT5A8 /16" screwdriver tip, 800°F 7.29 Replacement tips for 100W iron (MCM #96-1726) Order # Mfr. # Description (ea.) 96-1740 CT6E8 1/4" screwdriver tip, 800°F $11.95 96-1742 CT6F7 3/8" screwdriver tip, 700° tip 11.95

"WPT", and "WHC" Series Tips for Pyropen® Irons

·For WSTA2 (#96-330) Pyropen® Jr. Irons ·Long life tips ·Four soldering tip combinations and two inactive hot air nozzles for low temp heat available ·Sold individually Order # Mfr. # 96-1558 WPT15 96-1562 WHC54 Description .5mm taper needle tip 1.5mm hot air tip (ea.) $15.84 19.60

·Non-clogging ·Precision filler spout adapts to all refillable butane products ·Will work immediately in very cold weather ·FDA and pharmaceutical approved ·CFC/HCFC free Order # 21-8405 (ea.) $5.39

Premium Tip Cleaning Sponges WSTA6 Pyropen Jr.

These premium sponges are designed to expand to a thickness of 1" which will hold water for long periods of time. All sponges are shipped compressed in packs of ten. Order # 21-7912 21-7914 21-7916 21-7918 21-7920 21-7922 Mfr. # CS-1 CS-11 CS-36 CS-40 CS-44 CS-44M Size 1.5" x 2.12" 2" x 2.63" 2.25" x 3.5" 2.5" x 3.25" 2.7" x 2.7" 2.7" x 2.7" w/multiple holes 2.1" x 3.2" (pkg.) $9.39 10.39 10.49 10.49 10.49 10.49 10.49 (2 pkgs.-up) $8.62 9.85 9.99 9.99 9.99 9.99 9.99

21

Premium Butane Fuel

·Compatible with Weller® Portasol® and Weller® Pyropen tools ·Premium quality butane fuel will not clog ·UPS shippable ·1.0 oz. can ·12 cans per case Order # 96-1515 Mfr. # WB2 (1-11) $2.89 (12-up) $2.77

·Butane gas soldering iron and hot air tool ·Open/close ignition vent ·Self­ignition finger switch­no sparklighter required ·Temperature control­equivalent adjustment from 15 watts to 60 watts gives you flexibility ·Butane gas refill nozzle­refills in 20 seconds ·Fast and efficient 30 second heat up time ·Protective cap keeps hot tip from contact with delicate surfaces Includes: ·Pyropen Jr., taper needle soldering tip (#96-1465), and hot air nozzle (#96-1490), protective cap, and complete instructions Order # Mfr. # Description (ea.) 96-1460 WSTA6 Pyropen Jr. $69.95 Replacement soldering tips and hot air nozzles 96-1465 WPT01 1.0mm taper needle soldering tip17.95 96-1490 WHC0152 4.7mm hot air nozzle 14.95

21-7924 CS-47

Fax 1-800-543-4330 1-800-765-6960 447 1-800-543-4330, FAX 1-800-765-6960

Order Toll Free Order Toll Free

Solder Equipment

Section 21

Solder Pro

The versatile Solder Pro Series of butane­powered cordless soldering irons can also be adapted for use as a torch, hot knife, and heat tool. Since these irons are powered by readily available butane fuel, there is no electrical current to leak to sensitive circuits. The Solder Pro Series irons are completely portable, easy to refill, and versatile. Ready to use in 10 seconds. Three performance levels to choose from: Compact, standard, and ultimate.

®

Vacuum Desoldering Iron

Solder Pro Cordless Soldering Irons WSTA3 PyropenTM Kit

·Butane-powered cordless soldering iron ·Variable temperature: 392°~932°F ·Ready to solder in 30 seconds ·Sturdy metal tank contains enough fuel for up to three hours of use Kit contains: ·Pyropen soldering tip, torch ejector, heat tip, spanner, solder sponge, and iron holder in a metal box Order # 96-055 (kit) $129.00 (2-4 kits) $124.00 (5 kits-up) $119.00 ·Ready to use in ten seconds ·Each Solder Pro iron includes iron, 1.0mm conical tip (MCM #21-6835), protective cap with igniter, and instructions ·Refills with butane fuel (not included) Mfr. # Run Soldering Order # Size Time Temperature (kit) Solder Pro 50 21-6815 Compact­6" 30 minutes 410°F~750°F $21.20 Solder Pro 70 21-6820 Standard­8.75" 120 minutes 410°F~850°F 31.80

Allows single-handed desoldering of connections, PC boards and components. Spring-loaded plunger and 30W heating element removes most board level components quickly and safely. Easily disassemble for fast cleaning, tip and "O" ring replacement. Internal plunger pin automatically purges solder from tip with each use. Attached silicon cord is heat and solvent resistant. Order # 21-8240 21-8241 21-8242 Description (1-9) (10-up) Desoldering pump $14.95 $12.75 Replacement tip 0.99 0.85 Replacement "O" ring (set of two) 0.25 0.20

Tip-Tin Tinner/Cleaner

This lead free tip tinner is a fast, efficient, and safe means of re-tinning tips. This thermally-stable compound is residue-free, ESD and environmentally safe. Provides improved cleaning and re-tinning of highly oxidized soldering iron tips safely and efficiently. Order # 21-7926 Mfr. # TT-95 (1-9) $4.99 (10-up) $4.69

Solder Pro 120

·Automatic ignition ·Up to 200 minute run time ·Soldering temperatures 480°F~1000°F ·Torch temperature 2400°F ·Ready to use in ten seconds ·Includes the Ultimate Solder Pro 120 soldering iron, 1.6mm conical tip (MCM #21-6860), torch tip (MCM #21-6875), protective cap, and instructions ·Refills with butane fuel (not included) Order # 21-6825 (kit) $64.95

WPA2 Self-Igniting Pyropen®

·Just press the self ignition button and the Pyropen is ready to use in just 30 seconds ·Variable temperature: 482°~932°F ·Fast heat up ·Self igniting ·Up to three hours of operation Order # Mfr. # Description 96-480 WPA2 Self­igniting Pyropen® Replacement parts for WPA2 96-1259 WPA-B Burner 96-1260 WPA-E Ejector (ea.) $139.00 24.95 14.95

Solder Tip Cleaner

·The finest tip cleaner available ·Helps restore solder tips by removing old flux and solder ·.5 oz. can with two-sided tape allows placement on or near soldering station Order # 21-1075 (1-9) $5.97 (10-up) $5.45

Soldering Paste

E A B C D Designed for plumbing applications, sheet metal, chassis, buss bars, copper tubing, etc. Not intended for PC boards. Excellent for use as a tip cleaner. Net wt. 65 grams. Order # 20-890 (1-5) $8.12 (6-11) $7.08 (12-23) $6.39 (24-up) $5.88

L F G H J K

"WPT", "WHC", "WAR" Series Tips for Pyropen® Irons

·For WSTA3 (#96-055) and WPA2 (#96-480) Pyropen® Irons ·20 soldering tip combinations available ·Sold individually Description Taper needle tip Chisel tip 45° spade tip Taper needle tip Square taper pyramid tip 35° spade tip High powered long taper chisel tip 96-1554 WHC51 Hot air tip 96-415 WHC52 Hot air tip 96-1555 WHC53 Hot air tip Order # 96-1542 96-335 96-1543 96-1544 96-1546 96-1547 96-1551 Mfr. # WPT1 WPT2 WPT4 WPT5 WPT7 WPT9 WPT13 (ea.) $15.84 15.84 15.39 15.84 15.39 15.39 19.06 15.84 15.84 15.39

Solder­Pro Series Tips

Replacement tips for the Solder Pro 50 (MCM #21-6815), Solder Pro 70 (MCM #21-6820), and Solder Pro 120 (MCM #21-6825). Used in Solder Fig. Order # Description Pro Model # (ea.) A 21-6835 1.0mm conical tip Solder Pro 50 & 70$10.59 B 21-6840 2.0mm chisel tip Solder Pro 50 & 70 10.59 C 21-6845 Hot knife tip Solder Pro 50 & 70 10.59 D 21-6850 Torch tip Solder Pro 50 & 70 10.59 E 21-6855 Heat blower Solder Pro 50 & 70 10.59 & deflector F 21-6860 1.6mm conical tip Solder Pro 120 10.59 G 21-6865 2.4mm chisel tip Solder Pro 120 10.59 H 21-6870 3.2mm chisel tip Solder Pro 120 10.59 J 21-6875 Torch tip Solder Pro 120 10.59 K 21-6880 Hot knife tip Solder Pro 120 10.59 L 21-6885 Heat blower Solder Pro 120 10.59

SP44 Rosin Paste Flux

·A highly active noncorrosive flux with excellent wetting action ·Specifically for electronic applications ·Permits soldering of even difficult metals such as brass or nickel ·Noncorrosive and nonconductive ·2 oz. Order # 21-1820 (1-9) $1.47 (10-up) $1.26

21

Solder Flux

·A flux for all metals, as effective as acid or chloride types but non-corrosive ·Solders even hard-to-solder metals such as aluminum, zinc-bases alloys, steel, etc. ·Ideal for soldering bus and ground wires to aluminum and steel chassis, to hermetically seal lids to metal cases, for pot-tinning of copper and brass parts ·Not recommended for electronic wiring including printed circuits ·12 bottles per case · 2 oz. bottle Order # 20-3910 (1-5) $5.99 (6-11) $5.49 (12-23) $4.99 (24-up) $4.49

All Purpose Liquid Flux

·Kester liquid flux is an organic (water soluble) flux for a wide range of general purpose applications ·Delivers a faster-than-rosin fluxing action for high speed soldering ·4 fl. oz. bottle Order # 21-1825 (1-9) $2.01 (10-up) $1.80

NET 30 Terms

448

Order Online

www.mcminone.com

599B Tip Cleaner

·Cleans better than conventional sponges ·No water required ·Cleans tips quickly without reducing tip temperature ·Unit also doubles as the replacement cartridge for 601 iron holder (#94-155) Order # 94-782 (ea.) $9.49

SMD Removal Kit

Safely removes SMDs using low heat. Fast and easy to use. Heat can be applied with a soldering iron, warm air preheater, or heat gun. The SMD is easily removed with tweezers or a pick-up tool. Kit includes: Low temperature desoldering alloy (136°F), syringe with no clean flux, and six alcohol pads. Product contents will remove 8-10 SMDs. Order # 21-3450 (ea.) $19.95

Solder Equipment

Section 21

®

Liquid Solder-Flux

Noncorrosive liquid solder flux is ideal for electronic and communication work. Brush onto connection before soldering to aid solder flow. 2 oz. bottle with brush. Order # 20-1100 (1-5) $10.95 (6-11) $9.29 (12-23) $8.20

Solder

·High-quality .040" diameter solder ·60/40 ·370°F melting point ·Available in 6 oz. and 1 lb. spools Order # 21-1045 21-1040 Size 6 oz., 100' 1 lb., 260' (1-9) $3.92 7.98 (10-24) $3.58 7.40 (25-up) $3.47 6.84

Removal Alloy

Replacement alloy for removing SMDs. The same alloy that is included with the Chip Quik Removal Kit.

Solder Reel Stand

·Keep your bench neat ·Draw out solder wire smoothly ·Maximum of 1 kg (2.2 lbs.) rolled solder wire can be used ·Dimensions: 86mm (W) x 14mm (H) x 78mm (D) ·Shaft diameter: 15mm Order # 21-6800

®

Flux Pen #951

·Ideal for probe testing ·Low solid, halide free "no-clean" flux without the mess bottle flux leaves ·Chisel point allows work in tight spaces ·Eliminates interfering residues ·1/3 oz. Order # 21-2260 (1-4) $5.69 (5-up) $5.29

Order # 21-3451 21-3452

Description 16' alloy in 6.5" lengths 32' alloy in 6.5" lengths

(ea.) $124.00 199.00

No Lead Removal Alloy

Due to the increasing global demand to eliminate all lead from the industry, Chip Quik® no lead removal alloy is now available. This revolutionary product has been successfully tested for rework on PC boards manufactured with lead and no-lead solders. The no lead removal alloy meets the challenge of lead-free alloys now used on circuit boards. Order # 21-7505 21-7506 Description 16' alloy in 6.5" lengths-No lead 32' alloy in 6.5" lengths-No lead (ea.) $135.45 208.95

(ea.) $11.95

Tube Solder

·Tube type dispenser makes holding solder easier ·7' of high quality .040" diameter solder ·60/40 ·370°F melting point Order # 21-1050 (1-9) $2.05 (10-24) $1.61 (25-49) $1.50

Flux Pen #186

·Flux pen allows an easy and controlled application of mildly active flux ·Chisel point allows work in tight spaces ·Eliminates mess from flux bottles ·Good heat stability minimizes white residue problems ·1/3 oz. Order # 21-2265 (1-4) $5.50 (5-up) $5.29

No Clean Paste Flux

·10cc syringe with plunger and nozzle ·Same flux used in the SMD removal kit (#21-3450) ·Easy to dispense ·Great for soldering/desoldering Order # 21-3453 (ea.) $19.95 (2-up) $19.10

Lead-Free Solder

·95% tin, 5% antimony ·464° melting temperature ·Excellent for HAM radios, kit assembly, printed circuit boards, electrical repairs, CB radios and more ·Non-corrosive and non-conductive flux included ·.031" diameter ·1/4 lb. Order # 21-2985 (ea.) $4.13

6" Acid Brushes

·Can be used to apply a wide range of chemicals and solvents including flux, paste, paint, grease, glue, ink, and sealants ·These high-quality, disposable brushes have so many applications that they should be a part of virtually every customer's tool kit · Three per package Order # 21-2990 (pkg.) $2.09

Flux Dispenser

·Self standing, no spill, polyethylene squeeze bottle dispenses one drop of liquid flux, oil or solvent through stainless steel hypodermic needle ·Bottle holds 2 oz. of liquid ·Three needle sizes included: .010", .020" and .054" Order # 22-1075 (ea.) $3.60 (2-up) $3.49

21

Flux and Liquid Dispensers

B

A

C

D

These new POS-A-LOC® leak proof liquid dispensers offer a convenient way to dispense specific amounts of a variety of liquids without dripping, spilling, or waste. Fig. A B C D Order # 21-7904 21-7906 21-7908 Size 2 oz. 2 oz. 2 oz. Type Capillary I.D. Dispenser .020" Dispenser .010" Dispenser, .010" ESD safe Dispenser, .020" ESD safe (ea.) (2-up) $3.12 $2.84 3.12 2.84 6.35 6.03 6.35 6.03

SMD 2000 Solder/Desolder Rework Kit

Kit includes: ·Chip Quik® Removal alloy (4.5' length) ·Solder paste (no clean 63/37, 1cc syringe) ·Solder 3', 63/37, 2% silver, .031" ·Chip Quik® no clean flux in 10cc syringe for solder/desolder ·Liquid flux remover/cleaner (5cc container w/applicator) ·Probe kit (four stainless steel dental picks for SMD removal and placement) ·No clean solder wick (5') ·Handi-Vac (SMD pick and place tool w/tips) ·Two acid brushes ·Precision tweezers for SMD removal and placement ·Six low lint 4" x 4" cleaning wipes ·Ten double ended cotton swabs ·Six alcohol pads ·Durable plastic case Order # 21-3454 (kit) $126.20 (2 kits-up) $115.59

21-7910 2 oz.

Fax 1-800-543-4330 1-800-765-6960 449 1-800-543-4330, FAX 1-800-765-6960

Order Toll Free Order Toll Free

Solder Equipment

#21-8412 #21-8220

Section 21

#21-8416

#21-8225

High Vacuum Desoldering Pumps

These specially designed desoldering pumps provide precise repeatable operation and are fitted with a teflon tip. Features: ·Durable corrosion resistant plastic construction ·Precision metal plunger ·Corrosion treated springs ·Insulated vacuum pulse ·Regulated return ·Uniform reset pressure ·Cushioned shock reduction ·Replacement tips available Order # Mfr. # Description (ea.) 21-8412 DP-100 High vacuum desoldering pump $14.95 21-8416 DP-200 High vacuum desoldering pump, 22.95 ESD safe 21-8418 DPT-100 Replacement tip for DP-100 3.49 and DP140 21-8420 DPT-200 Replacement tip for DP-200 5.49 #21-8414

®

Vacuum Desoldering Tools

Lead-Free Pocket Solder

·The lead-free, high purity pocket-sized solder dispenser for convenient rework and repair ·Precision manufactured activated rosin-core SAC solder ·Meets Fed. Spec. QQ-S-571E WRAP II ·Type RMA flux ·Ensures even, reliable solder connections ·Cleans and wets heavily tarnished copper surfaces ·RoHS compliant ·1.0mm (0.04") diameter ·3.18m ·125" length Order # 20-4295 Mfr. # S200 (1-11) $12.95 (12-up) $11.43

Provides safe, low cost means of desoldering connections, PC boards and components. Large capacity spring-loaded plunger quickly removes solder in a single action. Tools easily disassemble for fast cleaning, tip and "O" ring replacement. Internal plunger pin automatically purges solder from tip with each use. Available in standard and ESD versions, replacement Teflon tips and "O" rings available separately. ·Dimensions: ·Overall length: 131/2" ·Cylinder length: 61/2" ·Cylinder diameter: 1" Order # 21-8220 21-8221 21-8225 21-8226 21-8227 Description (1-9) (10-up) Desoldering pump, standard version $9.95 $8.49 Replacement standard tip 0.99 0.85 Desoldering pump, ESD version 12.95 10.99 Replacement ESD tip 1.19 0.99 Replacement "O" ring (set of two) 0.25 0.20

Computer/Electronic Solder

·Designed for repairs to electronic components or circuit boards which are sensitive to excess heat ·Also features a low melting temperature (374°F) and a unique fluxing action ·60% tin, 40% lead alloy with "44" Rosin Flux ·.50 oz. Order # 21-4915 (1-9) $1.82 (10-up) $1.61

Desoldering Pump

#21-8418

®

Features: ·Precision regulated return ·Replaceable tip ·Compact, anti-corrosive plastic housing ·Precision metal plunger ·Sealed vacuum chamber ·Easy cleaning Order # 21-8414 21-8418 Mfr. # DP-140 DPT-100 Description Desoldering pump Replacement tip (ea.) $11.95 3.49

Heavy Duty ESD Desoldering Tool

All metal construction is ideal for heavy use including production re-work and repair. Provides safe, low cost means of desoldering connections, PC boards and components. Large capacity spring-loaded plunger quickly removes solder in a single action. Tool easily disassembles for fast cleaning, tip and "O" ring replacement. Internal plunger pin automatically purges solder from tip with each use. Replacement Teflon tips available separately. Order # 21-8235 21-8236 Description Desoldering pump Replacement ESD tip (1-9) $5.99 1.19 (10-up) $5.09 0.99

TV/Radio Solder

·Uses Kester's famous "44" Rosin Flux Core for outstanding performance on TV and radio components and many other electrical applications ·The convenient .062" wire size and 40% tin, 60% lead alloy make this ideal for a service technician's repair kit ·1 oz. Order # 21-4910 (1-9) $1.28 (10-up) $0.96

Static-Free Desoldering Tools

B A

Deluxe Soldapullt® Desoldering Tools

DS017: A ·Designed for heavy-duty, B high volume applications ·High-efficiency, durable construction ·Retractable shaft for storage and portability DS017LS: ·Same great features as the DS017 with the addition of being constructed out of conductive material making it ESD safe Fig. Order # A 21-4699 B 21-4698 Mfr. # Description (ea.) DS017 Deluxe Soldapullt® $23.95 DS017LS ESD deluxe Soldapullt® 26.95

Will not create or carry a static charge to the component being worked on, because the tips are made from conductive carbon fiber. The difference between the two tools is the grip size. The large grip is 1.03" in diameter and the small grip is .87" in diameter. Both tools offer nylon glass barrels and are 8.75" in length. Fig. Order # A 21-4530 B 21-4532 21-4534 21-4535 Description Large grip Small grip Replacement tip for #21-4530 Replacement tip for #21-4532 (ea.) $13.73 13.73 5.69 5.69

Kwik-Draw

·For the serious handyman or repairman ·Ideal for keeping in a tool box, the package feeds solder freely from one end ·The Kwik-Draw features Kester 60/40 "44" resin flux core solder, with a 0.050" diameter ·1.3 oz. tube Order # 21-1815 (1-9) $2.11 (10-up) $1.90

21

Anti-Static Desoldering Tool

·Conductive polypropylene barrel ·Conductive carbon fiber tip ·Overall length: 8.62" ·Diameter: .79" Order # 21-4531 21-4533 Description Anti-static tool Replacement tip (ea.) $13.73 5.69

Soldapullt lll Solder Remover®

·Removes solder from soldered junctions ·Just heat solder, release inner prod and solder enters the tube Order # 21-210 21-4701 Mfr. # PT109 PT409 Description Soldapullt III® ESD Soldapullt III® (ea.) $20.21 21.16

Pocket PakTM

·Kester Pocket Pak is a convenient, pencil-sized solder dispenser ·Clear plastic tube feeds solder easily ·Features Kester 60/40 resin flux core, solder with a .031" diameter ·.5 oz. Order # 21-1810 (1-9) $1.47 (10-up) $1.37 NET 30 Terms

HJ2000 ESD Desoldering Pump

Anti-static desoldering tool quickly removes molten solder with the press of a button. Heavy duty unit is lightweight and compact. Disassembles for easy cleaning. Order # 94-420 94-550 Mfr.# HJ2000 888-060 Description Desoldering pump Replacement ESD nozzle (ea.) $11.95 2.89

Replacement Parts for Soldapullt® DesolderingTools

Order # 21-215 21-4703 21-4704 21-4705 Mfr.# SRT-12 LS197 LS363 ODS31 Description Replacement tip for PT109 & DS017 Replacement tip for DS017LS & PT409 Replacement tip for SS350 Replacement O-ring for DS017 & DS017LS (ea.) $3.98 7.41 6.45 1.06

450

Order Online

www.mcminone.com

Solder Equipment

CrystalTM 400 Lead Free Solder Wire

·CrystalTM 400 is halide-free A no clean formulation giving crystal clear flux residues and minimal fume ·422°F ~ 217°C melting point ·RoHS compliant ·1 lb. spools Order # 21-8265 21-8270 Mfr. # MM01877 MM01880 Formula 400 400 Alloy Tin/Silver/Copper Sn96.5/Ag3.0/Cu.5 Sn96.5/Ag3.0/Cu.5 (dia.) 0.81mm 1.63mm Gauge 20 14 (1-4) $22.24 21.36 (5-up) $20.65 19.84

®

Section 21

Rosin Flux Desoldering Braid

CrystalTM 400 and 502 Solder Wire

·CrystalTM 400 offers halide-free and 502 is the RMA version with 0.2% of halide ·Both offer a no-clean formulation giving crystal clear flux residues and minimal fume Order # Formula 21-4719 400 21-4721 502 Alloy Tin/Lead 63/37 63/37 (dia.) .032" .032" (1-4) (5-up) $18.95 $17.80 17.95 16.92

"44" Rosin Core Solder

·The famous Kester "44" rosin core solders contain a high active noncorrosive flux with excellent wetting action, and are specifically designed for electrical/electronic applications Alloy Spool Order # Tin/Lead Size (dia) Gauge (1-4) (5-up) 21-1845 63/37 1 lb. .031" 21 $14.44 $12.86 21-1840 60/40 1 lb. .031" 21 13.39 12.08 21-1830 60/40 1 lb. .040" 19 14.18 13.44 21-1832 63/37 1 lb. 0.40 19 14.65 13.95 21-1835 60/40 5 lb. .040" 19 56.15 50.85 21-3195 60/40 1 lb. .025" 23 15.49 14.44 21-3196 63/37 1 lb. .025 23 16.54 15.49

Tenma desoldering braid is manufactured in the USA, to stringent control standards ensuring maximum quality and uniform performance. The copper braid utilizes only the best fine gauge oxygen-free strands, which are fully coated with specially formulated Type R rosin flux. The flux greatly enhances wick action ensuring fast reliable solder removal. Additionally, it cleans the connection, ensuring ease of re-soldering, while providing a protective coating to the wick to prevent oxidation, prolonging shelf life of the wick. Packaged in a variety of lengths and widths, a size is available to suite virtually any need. Order # 5' Length 21-8350 21-8351 21-8352 21-8353 21-8354 10' Length 21-8355 21-8356 21-8357 21-8358 21-8359 25' Length 21-8360 21-8361 21-8362 21-8363 21-8364 Width 0.025" 0.05" 0.075" 0.1" 0.125" 0.025" 0.05" 0.075" 0.1" 0.125" 0.025" 0.05" 0.075" 0.1" 0.125" (1-9) $1.49 1.49 1.55 1.59 1.99 2.49 2.49 2.49 2.69 3.29 6.69 6.69 6.79 7.39 8.49 (10-24) $1.35 1.35 1.39 1.45 1.79 2.25 2.25 2.25 2.45 2.99 6.09 6.09 6.19 6.69 (25-up) $1.19 1.19 1.25 1.29 1.59 1.99 1.99 1.99 2.15 2.65 5.35 5.35 5.45 5.95 -

Solder

·Solders faster ·Wets more completely ·One of the best solders on the market today ·60/40 ·370° melting point ·Five separate cores of flux provide rapid melting for perfect solder joints every time Order # 21-1106 21-2280 21-340 Spool Size 1 /2 lb. 1 lb. 1 lb. (dia) .015" .028" .05" Length 350' 180' (1-9) (10-24) $15.95 $14.65 20.95 19.75 22.95 21.50

"245" Low Residue Core Solder

·Provides both the soldering performance of an activated rosin flux and the visual clean appearance of a low residue flux ·Designed for electronic assembly ·Meets Bellcore specification TR-TSY-000078 and IPC-SF-818 (Type LR3CN) requirements for cored wire products ·Ideal for touch up and assembly ·Residues designed to be left on with NO post soldering cleaning Order # Tin/Lead 21-3200 63/37 21-3205 63/37 Size 1 lb. 1 lb. (dia) .020 .031 Gauge 25 21 (ea.) $18.64 13.39

Electronic Silver Solder

·Unique 62% tin, 36% lead, 2% silver alloy with a rosin flux core ·Specifically formulated for soldering small, silver-coated surface mount components ·.020" diameter ·.35 oz. Order # 21-1795 (1-9) $1.05 (10-up) $0.95

®

No-Clean Desoldering Braid

Tenma desoldering braid is manufactured in the USA, to stringent control standards ensuring maximum quality and uniform performance. The copper braid utilizes only the best fine gauge oxygen-free strands, which are fully coated with specially formulated No-Clean flux. This flux enables the wick to remove up to four times as much solder as conventional braids. Additionally, its formulation is halide free and completely non-conductive, eliminating the need to be cleaned from the PC board. This flux also provides a protective coating to the wick to prevent oxidation, prolonging shelf life of the wick. Packaged in a variety of lengths and widths, a size is available to suite virtually any need. Order # 5' Length 21-8365 21-8366 21-8367 21-8368 21-8369 10' Length 21-8370 21-8371 21-8372 21-8373 21-8374 25' Length 21-8375 21-8376 21-8377 21-8378 21-8379 Width 0.025" 0.05" 0.075" 0.1" 0.125" 0.025" 0.05" 0.075" 0.1" 0.125" 0.025" 0.05" 0.075" 0.1" 0.125" (1-9) $1.89 1.89 1.89 1.99 2.39 2.99 2.99 3.09 3.29 3.99 8.09 8.09 8.19 8.99 10.39 (10-24) $1.75 1.75 1.75 1.79 2.15 2.69 2.69 2.79 2.99 3.59 7.29 7.29 7.39 8.09 9.39 (25-up) $1.55 1.55 1.55 1.59 1.89 2.39 2.39 2.49 2.65 3.19 6.49 6.49 6.50 7.19 8.35

"285" Rosin Core Solder

·High-mobility and fast spreading action make soldering faster than ever before ·Designed for electrical and electronic work ·Completely noncorrosive and nonconductive flux residue ·Ideal for applications where cleaning is not performed after soldering ·1 lb. ·.031" diameter Alloy Spool Order # Tin/Lead Size (dia.) Gauge (1-4) (5-up) 21-2270 63/37 1 lb. .031 21 $14.44 $13.13 21-2272 63/37 1 lb. .025 23 15.49 14.18

"331" Organic Flux Core Solder Eutectic Solder

·For surface mount components ·Low-melt solder is the best blend of tin/lead for melting at the lowest possible temperature ·361°F melting point ·63/37 ·Organic rosin core ·.032" diameter ·1/2 lb., 200' Order # 21-1185 (1-9) $12.95 (10-24) $12.47 (25-49) $11.14 ·Extremely active ·More effective than rosin fluxes when soldering difficult metals such as copper, nickel and brass ·High heat stability allows for minimal smoke and odor ·Water soluble ·1 lb. ·.031" diameter Alloy Order # Tin/Lead 21-2275 63/37 21-2276 63/37 Spool Size (dia.) Gauge (1-4) (5-up) 1 lb. .031 21 $14.44 $13.13 1 lb. .020 25 18.85 17.33

21

Lead-Free Rosin Solder Dual Helping Hand w/Sponge

·Enables user to keep both hands free for positioning, soldering, and assembly ·Great for holding PC boards ·Holds small parts in place while soldering ·Adjusts to any position or angle Order # 22-6475 (ea.) $13.75 ·Used in metal repair (non-electronic) applications where the toxicity of lead must be avoided ·95% tin, 5% antimony alloy used mainly in copper tubing systems which carry portable drinking water ·Complies with federal standards regarding the use of solder in water drinking systems ·Use with external flux ·.050" diameter ·4 oz. Order # 21-2980 (ea.) $4.07

Fax 1-800-543-4330 1-800-765-6960 451 1-800-543-4330, FAX 1-800-765-6960

Order Toll Free Order Toll Free

Solder Equipment

Section 21

Pro Wick® Desoldering Braid

Pro Wick® is based on pure rosin (Type R Flux) and meets all of the most stringent soldering standards for worldwide applications: MIL-F-142560D Type R, NASA specification NHB5300.4, NPC200-4, and SP-5002. The advanced braid design has a strong capillary action that works instantly to pull in excess solder. Each roll is individually vacuum-packed to protect it from moisture and prolong shelf life. Order # 21-4767 21-4768 21-4769 21-4770 21-4771 21-4772 21-4773 21-4774 21-4775 21-4776 21-4777 21-4778 Width .060" .060" .060" .085" .085" .085" .100" .100" .100" .145" .145" .145" Length(Label) (1-9) 5' (Yellow) $2.19 10' (Yellow) 3.89 25' (Yellow) 8.69 5' (Green) 2.19 10' (Green) 3.99 25' (Green) 8.69 5' (Blue) 2.39 10' (Blue) 4.39 25' (Blue) 9.69 5' (Brown) 2.89 10' (Brown) 5.29 25' (Brown) 11.95 (10-24) (25-up) $2.06 $1.99 3.66 3.54 8.17 7.91 2.06 1.99 3.75 3.63 8.17 7.91 2.25 2.17 4.13 3.99 9.11 8.82 2.72 2.63 4.97 4.81 11.23 10.87

SMT Desoldering Wick

Tech Spray's new SMT Wick is the smallest wick available in the desoldering market. The size makes it an excellent tool for cleaning SMT pads, fine-pitch circuitry, and microcircuits. It also aids in protecting SMT pads because it requires minimal heat. The SMT Wick is offered with an ESD-safe static dissipative bobbin. Available in Pro Wick® and No Clean Wick. Order # Type Width Length (1-9) (10-24)(25-up) 20-3110 Pro Wick® .025" 5' $3.99 $3.75 $3.63 20-3115 Pro Wick® .025" 10' 6.89 6.48 6.27 20-3120 No Clean .025" 5' 4.39 4.13 3.99 20-3125 No Clean .025" 10' 7.59 7.13 6.91

Soder-Wick® Lead-Free SD

The fastest, safest desoldering braid formulated specifically for use with lead-free applications. ·Engineered specifically for high temperature, lead-free solders ·Transfers heat to the solder joint more quickly and efficiently than conventional desoldering braids ·Specifically designed for all lead-free solders ·Can also be used with tin/lead solders ·Packaged in ESD-safe static dissipative bobbins ·Minimizes the risk of damage associated with static electricity ·Non-corrosive ultra high purity no-clean flux ·Will not leave ionic contamination on the boards ·Especially effective at removing residual solder from SMT pads ·Available in 5' and 10' rolls Order # 21-8250 21-8252 21-8254 21-8256 21-8258 21-8260 Width 0.060" 0.080" 0.110" 0.060" 0.080" 0.110" Length 5' 5' 5' 10' 10' 10' (1-11) $2.89 2.99 3.39 5.29 5.59 5.99 (12-24) $2.64 2.76 3.09 4.76 5.03 5.51 (25-up) $2.51 2.62 2.93 4.52 4.79 5.24

Soder-Wick® Rosin

This safe, fast rosin flux desoldering braid is designed for general purpose solder removal from PC boards. Non corrosive formula is designed for Type R rosin flux. Will not leave ionic contamination on the board. Meets Mil-14256, Mil-B-81705C, Mil-Std-2000A specs and NASA SP-5002, NPC-200-4 and NHB 5300.4 Reliability and Quality Assurance Publications. Available in 5', 10' and 25' rolls. Order # 20-2785 20-2786 20-2787 20-2788 Width .030" .060" .080" .110" Length (1-11) 25' $11.95 25' 11.95 25' 12.95 25' 13.95 (12-24) (25-up) $10.67 $10.15 10.67 10.15 10.97 10.43 12.12 11.52

No Clean Desoldering Braid

Today's rework applications demand precision desoldering and high performance braid is essential. The newly designed No-Clean Wick is designed to meet these demands. The minimal residue left after desoldering is inert and nonconductive, therefore board rinsing is unnecessary. Each roll is individually vacuum packed to protect it from moisture and prolong shelf life. Order # 21-3760 21-3761 21-3762 21-3765 21-3766 21-3767 21-3770 21-3771 21-3772 21-3775 21-3776 21-3777 Width Length(Label) .060" 5' (Yellow) .060" 10' (Yellow) .060" 25' (Yellow) .085" 5' (Green) .085" 10' (Green) .085" 25' (Green) .100" 5' (Blue) .100" 10' (Blue) .100" 25' (Blue) .145" 5' (Brown) .145" 10' (Brown) .145" 25' (Brown) (1-9) $2.69 4.79 10.95 2.69 4.89 10.95 2.89 5.39 11.95 3.59 6.39 13.95 (10-24) (25-up) $2.53 $2.45 4.50 4.36 10.29 9.96 2.53 2.45 4.60 4.45 10.29 9.96 2.72 2.63 5.07 4.90 11.23 10.87 3.37 3.27 6.04 5.81 13.11 12.69

No Clean SD

This safe, fast no-clean flux desoldering braid is designed for one-step cleaning. Specially designed flux requires no cleaning after solder removal, speeding up the re-work process. Additionally, it provides consistent flux type when used as part of a no-clean board re-work and assembly process. ESD-safe static dissipative bobbin minimizes the risk of damage associated with static electricity. This is the only braid that meets Mil-Std 883B. Also meets Mil-14256, Mil-B-81705C, Mil-Std-2000A specs, Decay Rate Provision of Mil-B-81705C and Mil-Std-2000A and NASA SP-5002, NPC-200-4 and NHB 5300.4 Reliability and Quality Assurance Publications. Also meets Bellcore TR-NWT-000078 and IPC SF-818 specifications. Available in 5' and 10' rolls. Order # 20-2800 21-2170 21-2175 21-2180 20-2805 20-2806 20-2807 20-2809 Width .030" .060" .080" .110" .030" .060" .080" .110"

®

No Clean Desoldering Braid

·Superior high-quality desoldering braid with unique no clean flux that doesn't leave a residue ·Pure oxygen-free copper wires combine with special cleaning process for faster heat transfer ·Static dissipative blue bobbin Order # 21-2170 21-2175 21-2180 Description(Label) .060" x 5' (Yellow) .080" x 5' (Green) .110" x 5' (Blue) (1-4) $2.89 2.99 3.49 (5-9) $2.76 2.87 3.29 (10-up) $2.62 2.72 3.12

Anti­Static Desoldering Braid

Today's rework applications demand precision desoldering. Tech Spray's Pro Wick® is produced with an advanced braid design and stringent quality control procedures. This high quality wick is now available in an anti­static bobbin. Each roll is individually vacuum packed to protect it from moisture and prolong shelf life. Order # Width Length (Label) (1-9) (10-24) (25-up) ProWick® Anti-Static Bobbin 21-7175 .060" 5' (Yellow) $2.29 $2.15 $2.08 21-7180 .060" 10' (Yellow) 4.09 3.84 3.72 21-7185 .085" 5' (Green) 2.39 2.25 2.17 21-7190 .085" 10' (Green) 4.09 3.84 3.72 NET 30 Terms

Rosin SD

This safe, fast rosin flux desoldering braid is designed for general purpose solder removal from PC boards. ESD-safe static dissipative bobbin minimizes the risk of damage associated with static electricity. Non corrosive formula is designed for Type R rosin flux. Will not leave ionic contamination on the board. Meets Mil-14256, Mil-B-81705C, Mil-Std-2000A specs, Decay Rate Provision of Mil-B-81705C and Mil-Std-2000A and NASA SP-5002, NPC-200-4 and NHB 5300.4 Reliability and Quality Assurance Publications. Available in 5' and 10' rolls. Order # 20-2790 20-2791 20-2792 20-2793 20-2795 20-2796 20-2797 20-2798 Width .030" .060" .080" .110" .030" .060" .080" .110" Length 5' 5' 5' 5' 10' 10' 10' 10' (1-11) $2.69 2.69 2.89 3.29 4.33 4.69 4.99 5.59 (12-24) (25-up) $2.43 $2.31 2.43 2.31 2.62 2.49 2.83 2.69 4.28 4.07 4.28 4.07 4.57 4.34 5.05 4.80

21

Length 5' 5' 5' 5' 10' 10' 10' 10'

(1-11) $2.89 2.89 2.99 3.49 5.29 5.29 5.59 6.19

(12-24) (25-up) $2.62 $2.49 2.76 2.62 2.87 2.72 3.29 3.12 4.76 4.52 4.76 4.52 5.05 4.80 5.66 5.38

Desoldering Wick

·Quality braided solder remover ·5' (L) x .1" (dia) Order # (1-9) (10-24) (25-49) 21-327 $1.94 $1.61 $1.40

452

Order Online

www.mcminone.com

Information

17 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

36837


You might also be interested in

BETA
ELECRAFT SOLDERING TIPS
CooperTools Electronic Catalog
GP300 Series Professional Portable Radios
00C40-O HT 1000, MT 2000, MTs 2000, and MTX Series Handie-Talkie Portable Radios - Service Manual