Read Microsoft Word - D104-HiFi - TUG8 - 03282k9.doc text version


Custom design replaces Astatic D-104 Element

This is an FET electret element, you will need to add the supplied Resistor/Jumper in your T-UG8 Base to pass DC to the element. Following the pictures above, this is what you do: · Disassemble the microphone head ­ four screws. · Insert the felt and mic from behind the front screen. · Solder the leads from the neck to the mic. · Insert some foam or other non-acoustic padding behind to hold the element in place · Reassemble the microphone head. · · · · Remove bottom cover plate. Add Resistor jumper assembly as shown Cut white wire on terminal strip left (this allows VOX operation). Reassemble bottom cover plate.

When operating, adjust the bottom mic gain as desired.


Microsoft Word - D104-HiFi - TUG8 - 03282k9.doc

1 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate