Read UD-73_PB-2006 text version

Up Product Up UD-73 date DAYTON BRAKE date

December 1999

DRUMS & ROTORS

EUCLID INDUSTRIES, LLC · 6660 BETA DRIVE · CLEVELAND, OHIO 44143-2321 · EUCLID INDUSTRIES CANADA LTD. · TORONTO · EDMONTON · MONTREAL

(440) 461-4300 · VANCOUVER

WHEEL ATTACHING PARTS

The Industry Standard For Over 50 Years

ENGINEERED TO LAST

Wheel studs and bolts are the safety related parts that keep your vehicle rolling. More fleets buy Euclid wheel mounting parts than any other brand. Euclid studs, inner and outer cap nuts, and rim clamps set the industry standard for quality, strength, precision-fit with exceptional availability at competitive prices. No other source offers the safety and quality assurance found in Euclid wheel mounting parts.

INNOVATION IN DESIGN

Euclid has been at the forefront of developing through hardened inner and outer cap nuts for dual wheels. Now, with Euclid's line of through hardened stud and nut assemblies for dual wheels, the entire assembly (mounting stud, inner and outer cap nut) is Grade 8 strength.

ROLLED THREADS FOR ENDURANCE

Rolled threads increase the strength and reduces stripping and fatigue failures of wheel studs. Euclid rolls, not cuts, external threads on its Grade 8 wheel studs as specified by The Society of Automotive Engineers Standard J429. This SAE standard followed by Euclid further details the material, manufacturing, strength and testing requirements for externally threaded fasteners.

FASTENER QUALITY ACT

Public laws 101-592 and 104-113 were passed by the United States Congress to insure fastener quality. These laws (as of July 1998) create procedures for the certification and documentation of covered fasteners (including many wheel mounting parts) sold for use within the United States. With the new Federal laws wheel mounting integrity will rely even more on Euclid quality parts.

Cold forging increases stud tensile strength

IN-DEPTH APPLICATION COVERAGE

Euclid's extensive line of studs, nuts, wheel rim clamps and hubs for both disc and spoke wheels provides the broadest line and highest quality wheel mounting parts available, when you need them.

EUCLID QUALITY ASSURANCE

Each lot of Euclid wheel mounting parts covered by this act is thoroughly tested and documented. Each lot is assigned a control number which identifies laboratory test reports to assure it meets our exacting standards. Records are retained for a minimum of five years. The Euclid Registered lEl forging mark is assurance that you are receiving genuine Euclid quality wheel mounting parts.

Quality control lot testing

Ride with peace of mind on Euclid Wheel Mounting Parts.

Rolled threads offer superior strength to machine cut threads

© 1999 Euclid Industries, LLC

CONTENTS

SteelLite X30TM Brake Drum .................................................................................... 2 How to Use This Catalog.......................................................................................... 4 What Makes a Good Brake Drum ............................................................................. 5 Common Problems .................................................................................................. 8 Brake Drum Types .................................................................................................. 12 How to Measure Brake Drums ............................................................................... 14 Numericial Listing .................................................................................................. 15 Brake Diameter Charts ........................................................................................... 22 Brake Rotors Numerical Listing .............................................................................. 28 Medium-Duty Truck Disc Brake Rotor Identification ................................................ 28 Trailer Hubs ............................................................................................................ 32 Ultra Light Weight TP Trailer Hub ............................................................................ 52 Light Weight TP Trailer Hubs .................................................................................. 54 Light Weight TN Trailer Hubs .................................................................................. 56 Cast Drum Cross Reference .................................................................................. 58 Brake Rotor Cross Reference ................................................................................ 63

1

The SteelLite X30TM brake drum sets a new standard in advanced wheel-end design and development. Feature for feature, our SteelLite X30TM brake drum is a superior alternative to any other brake drum available.

Advanced

Fleets who specify the SteelLite X30TM brake drum for medium- and heavy-duty trucks, tractors and trailers will enjoy its considerable advantages, including reliability, balance, weight reduction and lifetime operating cost.

The forming process we use to develop the SteelLite X30TM brake drum produces a one-piece steel shell that provides exceptional strength, durability and concentricity. This design eliminates the need for a weld seam, which can compromise strength or produce weldinduced hard spotting. Our brake drums are also accurately and permanently balanced -- without weld weights. Our centrifugal casting process permanently fuses gray iron braking surface material to the one-piece steel shell. If the braking surface should ever crack due to heat checking, the outer SteelLite X30TM steel shell can help prevent debris from littering the highway. The one-piece steel shell and cast iron braking surface also provide substantial weight savings over standard full-cast iron drums. In fact, total weight

reduction on a typical tandem axle

Lightweight

tractor/trailer combination equipped with the SteelLite X30TM brake drum can be as much as 200 pounds!

2

Exclusive One-Piece Steel Shell.

Provides exceptional strength, durability and concentricity, and reduces weight. One-piece design eliminates weld seams.

facility. This plant features the latest process technology and the most sophisticated statistical process controls to ensure optimum quality.

No Weld Weights.

Because of the forming process, SteelLite X30TM drums are inherently balanced. There is no need for troublesome weld weights.

Lighter Weight.

SteelLite X30TM brake drums are significantly lighter than standard full-cast drums (up to 200 lbs. for a typical tandem axle tractor/trailer combination).

Exclusive SpinCast Casting Process.

Permanently fuses a gray iron liner to a onepiece steel outer shell. The result is a superior braking surface that is much less vulnerable to disintegration in the event of breakage.

OEM or Retrofit.

SteelLite X30TM brake drums are available in most popular axle configurations as original equipment for your new tractors and trailers and as retrofits for your existing equipment.

State-Of-The-Art Manufacturing.

All SteelLite X30TM brake drums are built under one roof in our Franklin, Kentucky manufacturing

Another advantage of our one-piece

steel shell design is that it produces an inherently balanced drum. Since

Balanced

The SteelLite X30TM brake drum is just one product within the Meritor family that demonstrates our dedication to addressing our customers' true business needs. By combining innovation with experience, we've become North America's first -- and only -- truck component supplier to offer our customers a complete family of braking components, backed by top-notch service and support.

Meritor's SteelLite X30TM brake drums require no weld weights, the result is a well-balanced, ready-to-mount drum. This design can also help reduce vibration-induced wear and tear on other wheel-end components.

Complete

3

HOW TO USE THIS CATALOG

The Meritor part numbering system divides as such; Example: 03 122222 - 002 PREFIX CODE 01 02 03 04 05 08 09 11 12 13 14 15 16 17 19 21 23 47 48 53 55 56 57 60 63 69 73 83 85 93 95 DESCRIPTION Rear Steel Wheel - No Longer Available Front Brake Without Drum Assembly Brake Drums, Cast Non-Balanced Hub Only - Rear Drive and Trailer Hub Only - Front Rim, Studs, Misc., Etc. Hub / Wheel Parts Rear Steel Wheel and Brake Drum Assembly NLA / Replaced by 48-Series Front Wheel with Brake Drum Assembly NLA / Replaced by 56-Series Brake Drums, Cast Weld-to-Balance Hub and Drum Assembly - Rear Drive and Trailer Hub and Drum Assembly Front Hub and Rotor Assembly Rear Hub and Rotor Assembly Front Wheel and Rotor Assembly Front NLA / Replaced by 57-Series Wheel and Rotor Assembly Rear NLA / Replaced by 49-Series Rotor Nodular Iron Wheel Rear / Trailer Wheel Drum Assembly Rear / Trailer Nodular Iron Wheel X-30 Brake Drum Nodular Iron Wheel Front Wheel Drum Assembly Front Nodular Iron Wheel Wheel Rotor Assembly Front Nodular Iron Wheel Calipers and Kits Brake Drum, Non Balanced / With Tapped Holes for Exciter Mounting NLA Brake Supports - etc. Brake Drum, Balanced / With Tapped Holes for Exciter Mounting No Longer Available X-10 Series Brake Drums / Non-Balanced Brake Drums / Machined to Balance (MTB) X-10 Series Brake Drums / Weld-to-Balance (WTB) X-10 Series Brake Drum / Machined to Balance (MTB)

Prefix

Base Number

Suffix

· The prefix indicates the part type. The 03 in the

example indicates a cast non-balanced brake drum. The 31 different prefix numbers are used to categorize and describe the part. At present not all of the prefix codes are currently being used, but all are listed for your reference. (See attached Prefix Chart) This drum, rotor and trailer hub catalog covers prefix codes 03, 04, 13, 14, 23, 53, 83, 85, 93, 95.

· 122222 base number, when coupled with the

prefix, gives the part type and the part dimensional specifications through the numerical part number listing. The base numbers are not all available with all the prefix combinations.

· The suffix, a three digit number, indicates the

phase of manufacturing the part is in. For the current list of Meritor Brake Drum and Rotor part numbers, see the appropriate numerical listing. If you have brake drum numbers not found in the numerical listing, check the discontinued and replaced by list in this catalog. This catalog contains cross-reference information for: · Gunite · Motor Wheel (centrifuse drums) · Webb

4

WHAT MAKES A GOOD BRAKE DRUM

There are a number of attributes that differentiate between mediocre and a good brake drum. The following highlights these and what they mean to the end user.

1. A HEAT ABSORPTION DEVICE (HEAT SINK).

The braking system in a vehicle converts the vehicle energy of motion into heat energy by means of friction between the brake lining and the brake surface of the brake drum when the vehicle's brakes are applied. a). The surrounding parts, such as brake lining, rim, tire, hub, bearings, and drum absorb heat by conduction and radiation. b). The surrounding air is heated by convection. Radiated heat to surrounding parts is small and heat dissipated by convection to the surrounding air is slow relative to the actual time of braking. For these reasons nearly all the braking energy must be stored in the form of heat in the brake drum. This energy is stored by heating the drum material to a higher temperature than the drum temperature prior to the brake application. A heavier drum will store more energy than a light one will. A heavier drum is stronger and more fade resistant.

2. A CYLINDRICAL BRAKE LINING INTERFACE.

The brake drum moves past a stationary brake lining. When (if) the brake surface does not move past the lining uniformly, the brake drum has run out. This will overstress the drake drum, linings, and attaching hardware, causing variable heating of the brake drum braking surface which results in heat checking, excessive wear of both the drum and lining, pulsing of the brake, and shortened life of both the drum and lining. Also to keep the drum dimensionally stable under these conditions, it must be a relatively heavy brake drum. A heavy precise brake drum does not reduce the need for linings to fit the drum correctly. If the linings are not contoured to fit properly, the brake will not produce proper breaking torque. Poorly contoured linings cause additional mechanical stress in the drum, shoes and lining, and brake hardware. This additional stress hastens failure and greater wear. Before linings are "burnished" or seated into the brake drum, they may rub on only a few high spots. These superheat the brake drum braking surface in very small areas and can be seen on the brake dynamometer as fire bands. A light brake application will cause this to occur whereas a snub brake application will force the lining against more of the braking surface of the brake drum thus limiting or even eliminating these types of hot spots. If these hot spots are allowed to continue, martensite hot spots will occur, and in turn drum distortion, and very early cracking can happen. Lining that takes longer to burnish will be more likely to cause hot spotting. Many of the non-asbestos organic linings fall into this category. Since martensite hot spotted brake drums cannot usually be successfully rebored, they usually must be scraped.

3. HIGH STRENGTH, HEAT, AND WEAR RESISTANT BRAKE DRUM MATERIAL.

A brake drum must be strong enough to resist the maximum mechanical stress caused by the expanding and selfenergized brake shoes at high temperatures. The brake drum's stiffness or resistance to deflection is derived from the thick shell structure and the stiffness of the gray cast iron. Higher tensile strength gray iron does not change the deflection of the brake drum significantly. Although higher strength iron is more resistance to thermal stress caused by temperature gradients, as a "hot" brake surface and a "cold" outside brake drum diameter. The occurring problem here is the "cold" outside diameter of the brake drum does not want to expand to a bigger diameter, but the "hot" inside diameter of the brake drum does want to expand. The "hot" inner surface is caused to compress or compresses plastically so that it fits within the "cold" outer surface. But as the "hot" inner surface cools, cracks form because the metal was too compressed to return to its original position thus resulting in hairline surface cracks known as heat checks. Per SAE J431, recommended strength of a heavy-duty brake drum iron is 35,000 psi. The Meritor brake drum iron strength is determined from test bars cut from brake drums rather than separately cast test bars, and averages over 40,000 psi. It is important to realize/note that as the strength of the brake drum increases so does their resistance to wear.

4. HEAVY ROTATING PARTS THAT IF IMBALANCED CAN SIGNIFICANTLY AFFECT THE VEHICLES RIDE.

The mass of a 16.5" x 7" brake drum is concentrated about 9 inches radially from the hub bearing centerline. Unless the brake drum is balanced, it helps excite vibration in trucks and trailers. That is why it is important to use balanced brake drums on all front and rear applications. Most brake drum balancing is done by welding weights to the outside of the drum, but Meritor pioneered and patented a technique to balance brake drums without welding on balance weights this is called Machine to Balance (MTB). The industry typically requires front hub/drum assemblies balanced to 20-in. oz. maximum and rear hub/drum assemblies balanced to 50-in. oz. maximum.

5

WHAT MAKES A GOOD BRAKE DRUM (Cont'd.)

5. SUMMARY; THE BEST BRAKE DRUM FOR OVERALL PERFORMANCE

Is Is Is Is a relatively heavy brake drum made from temperature and wear resistant high tensile iron precisely machined balanced by machining rather than adding weights

MAXIMUM BRAKE FACE DIAMETERS

Maximum brake face diameters are indicated on Meritor Brake drums, i.e., the word "Max.Dia. 15.120 inches 384.05mm" will be found on brake drums with a 15 inch, 381mm nominal brake face diameter. This means that for safe operation the brake face diameter should never exceed 15.120 inches, 384.05mm from machining or wear. Because we have no way of knowing the number of heat cycles or the severity of the cycles to which the drum has been subjected in actual usage, we do not recommend reboring the brake face diameter. The user is best able to judge whether the drum has sufficient life remaining to justify reboring. The maximum diameters are shown in the chart. Meritor has engineered their brake drums to provide safe operation At the maximum brake face diameters, however, Meritor does not machine these drums to maximum diameters and cannot control the methods that others use to re-machine them after they are put into use. Do not confuse maximum brake face with maximum rebore diameters. When the drum reaches the maximum brake face diameter, it must be removed from service. There may be some instances where it is a good economic decision to rebore a brake drum but after rebore, there must be some wear life left (at least .040 inches) prior to reaching discard diameter. Meritor does not recommend reboring brake drums for the following reasons: NOMINAL DIA. MAXIMUM BRAKE FACE DIA.

inches 7.25 8.00 9.50 9.75 10.00 11.00 11.06 12.00 12.25 14.00 14.50 15.00 16.00 16.25 16.50 16.50 17.00 17.25 18.00 20.00 20.25 21.00

mm 185 204 242 248 254 280 281 305 312 356 369 381 407 413 420 420 432 439 458 508 515 534

inches 7.340 8.090 9.590 9.840 10.090 11.090 11.120 12.090 12.340 14.090 14.620 15.120 16.120 16.370 16.620 16.585 17.120 17.370 18.120 20.120 20.370 21.120

mm 186.44 205.49 243.59 249.94 256.29 281.69 282.45 307.09 313.44 357.89 371.35 384.05 409.45 415.80 442.15 421.25 434.85 441.20 462.25 511.05 517.40 536.45

1. 2.

It usually is not a good economic solution, Reboring does not remove fatigue damage even though it may remove the heat checks. It is very difficult to avoid running brake drums over the maximum brake face diameter. Martensite (hot spots) and distortion caused by it are virtually impossible to remove. Severe corrosion is frequently on the outside of the drum which weakens the drum.

3.

4.

5.

6

WHAT MAKES A GOOD BRAKE DRUM (Cont'd.)

WHEN SHOULD A BRAKE DRUM BE REPLACED?

The ability of a brake drum to perform safely is affected by a variety of factors. Conditions, which affect the life of brake drums, are listed, although this list is not intended to be all-inclusive it should serve as a useful guide. The brake drum should be replaced when any of these conditions appear. 1. 2. 3. 4. 5. 6. 7. 8. 9. Brake face diameter reaches maximum limit Excessive heat checks Cracks Martensite spotted drums ­ "hot spots" Worn or elongated bolt holes Galling of brake surface Brake drum known to have been overheated as occurs with dragging brakes Brake drum warped....out of round It may be necessary to replace brake drums in pairs in order to maintain proper brake balance and efficiency.

RECOMMENDATIONS FOR LONGER BRAKE DRUM AND ROTOR LIFE

When drums are forced to fit onto a hub, there is improper match of parts for installation. The cause must be determined and corrected. Wheel bearings should be properly adjusted to prevent the drum from picking up the load created by the braking action Drums and linings should be checked at periodic intervals to detect operational patterns. The use of non-asbestos organic linings can cause linings to swell and drag resulting in hot spots and lower fuel economy. Clearance between non-applied brake linings and the drum varies slightly. See the brake system manufacturer's recommendations for this adjustment. Proper clearance prevents excessively hot linings and drums and improves fuel economy. Parking brakes should not be set while the drums are hot. Allow them to cool, otherwise, drum cracking and failure can result.

DRUM FAILURE ANALYSIS

Regular and thorough inspection of your brake system is the best investment you can make for low cost per mile brake operation. Be sure you have a standard inspection timetable and follow it. The following pages list common problems you should be alert for.

7

COMMON PROBLEMS

Grease Stained Drums

Brake drums with discolored spots on the braking surface, and oil or grease splattered on the brake assembly indicates over-lubrication of the cam or camshaft, or by an oil seal failure. Correct this problem by repairing the source of the oil or grease leak, clean the drum and replace soaked linings.

Cracked Drums

A drum which has cracked completely through a section of the braking surface must be replaced immediately. A cracked drum is not repairable! Cracked drums are caused by one or more of the following: 1. Excessive heating and cooling 2. Excessive shoe pressure Repeated cracking of this type may indicate one or more of the following: 1. Dragging brakes 2. Inadequately designed drums for the application 3. Inadequately designed braking system for the application 4. Incorrect brake balance of the vehicle 5. Driver abuse The total braking system of the vehicle should be checked thoroughly, paying attention to the following: 1. Proper friction ratings 2. Proper valving and pluming 3. Proper brake balance 4. Missing linings and/or brake system components.

Heat Checking

A broken network of fine hairline cracks on the braking surface of the drum, is a normal phenomenon of braking surfaces. It is caused by regular heating and cooling of the surface. Heat checking does not impair brake performance; but you should examine heat checks frequently to make sure they have not grown deep enough to weaken the drum.

Oversized Drums

If the brake surface diameter is in excess of it's specified maximum diameter, replace the drum immediately. It may be necessary to replace drums in pairs to assure proper brake drum balance and braking efficiency. If the linings show irregular wear replace them.

8

COMMON PROBLEMS (Cont'd.)

Scored Drums

Scored drums are signified by circumferential grooves on the braking surface and excessive lining wear. If the scoring is not deeper than the maximum rebore diameter, the drum may be rebored and returned to service. The linings should be replaced and the braking system should be checked to make sure excessive amounts of abrasive material are not entering into the lining-drum contact area. If the scoring is deeper than the maximum rebore diameter, replace the drum immediately.

Out-Of-Round Drums

Variations in drum diameter at different points on the braking surface indicate out-of-round drums. The drum should be machined within allowable rebore limits to restore concentricity. Do not exceed the maximum rebore limit of turned drums, and replace drums which are worn beyond their specified maximum diameter. If you are unable to restore concentricity by reboring the drum, replace it with a new one. It may be necessary to replace drums in pairs to assure proper brake drum balance and braking efficiency.

Excessive Wear and Galling

Excessive wear along the edges of the lining contact area, or in areas coinciding with the rivet holes of the lining, is usually caused by abrasive material collecting between the lining and the drum/rotor. Remove the abrasive material from the system and check the drum for scoring. If the brake drum is scored beyond the maximum limit, replace the drum immediately. Install dust shields to restrict the amount of abrasive material which can enter the braking system. Excessive wear can also be caused by misaligned brake shoes. If the shoes are not "square" to the braking surface, uneven forces are applied. This can result in deep grooves in the braking surface. If the brake drum is scored beyond the maximum limit, replace the drum immediately. Correct the brake shoe alignment to alleviate further grooving. Brake drum galling in an abnormal wear pattern is due to initial incompatibility between the brake drum lining and the brake surface. This condition may correct itself due to brake drum and lining wear. If severe, consider replacing the lining and/or the brake drum.

9

COMMON PROBLEMS (Cont'd.)

Blue Drums

A bluish disfiguration on the brake parts (shoes, drums/rotors or bolts) indicates excessive heat. This is usually caused by an oversized brake surface diameter/undersized rotor width or by weak or broken return springs. For drums, check the braking surface diameter. If it is oversized, replace the drum immediately. If the return springs are weak or broken, replace them.

Martensite Spotted Drums

Martensite spotted drums have extremely hard, slightly raised, dark colored spots on the braking surface, shown uneven wear and the surface is out-of-round. This condition may cause excessive noise or shudder during brake applications. Unless this is detected very early, the brake drum should be scrapped. The spots are caused by very light brake applications with nonasbestos organic linings that are contacting the drum at a few lining high spots. To avoid this problem, change braking technique to snubs rather than light dragging stops or ensure the lining fits the drum contour uniformly when it is new. Attempts to rebore a drum to remove the spots will usually aggravate an already bad situation, and if the drum is allowed to stay in service, cracks will connect between the martensite spots leading to brake drum failure. If the brake lining and drum are replaced and the same brake application techniques are used, the results will likely be the same. If only the drum is replaced it may not develop these spots (as the high points are worn down).

Polished Drums

A polished brake drum/rotor is characterized by a mirror-like finish on its braking surface. Correct this problem by removing the gloss with 80 grit emery cloth. If the problem recurs, check the linings to make sure they are the proper friction rating. If the linings are glazed, consult the vehicle manufacturer for the proper lining material.

10

NOTES

11

BRAKE DRUM TYPES

12

BRAKE DRUM TYPES

13

HOW TO MEASURE BRAKE DRUMS

IDENTIFY REQUIRED DRUM BY MEASURING: Brake Surface Diameter Bolt Circle Diameter

Brake Surface Width

Size of Bolt Holes

Overall Depth

Pilot Diameter

CHECK THIS INFORMATION: Number of bolt holes. Slots in the back of the drum for wheel spoke clearance Drilled and tapped holes for skid control exciter

14

NUMERICAL LISTING

CAST BRAKE DRUMS, CAST -- NON-BALANCED

PART NO. 03-012480-002 03-012582-002 03-120149-002 03-120376-002 03-120442-002 03-120459-002 03-120516-002 03-120517-002 03-120553-002 03-120556-002 03-120574-002 DRUM WEIGHT TYPE

112 118 110 131 106 60 83 76 74 65 103 P R T AU R AH A S S R R

WHEEL TYPE

Spoke Disc Disc

BRAKE SIZE

16.5 x 7 16.5 x 7 16.5 x 7

OVER- BRAKE PILOT ALL SURFACE DIA. DEPTH WIDTH

9.000 9.500 8.620 7.600 7.560 7.440 9.219 7.500 4.190 6.500 5.560 5.500 5.500 7.560 11.250 9.440 8.660 9.500 11.000 10.000 9.438 9.438 6.250 11.000 11.250

BOLT CIRCLE

12.750 11.250 11.250 11.250 12.500 11.250 11.000 11.000 8.750 12.500 12.750

BOLT HOLE NO.

6 10 10 10 5 5 5 5 6 5 5

SIZE

0.650 0.840 0.812 0.844 0.656 0.531 0.656 0.656 0.844 0.531 0.781

DESCRIPTION/ COMMENTS

Spoke/Disc 16.5 x 8.625 10.250 Spoke Spoke Spoke Spoke Disc Spoke Spoke 16.5 x 7 15 x 3.5 15 x 6 15 x 5 15 x 5 15 x 5 16.5 x 7 8.656 5.310 7.090 6.590 7.220 6.220 8.720

Replaces 03-120192, 03-120435 Replaces 03-122567

Replaces 03-120664, 03-122103,

03-120586-002

116

R

Spoke

16.5 x 7

8.750

7.500

9.500

11.250

5/6 .781/.656 03-122201, 03-122744, 03-023058

03-120705-002 03-120754-002 03-120855-002 03-120877-002 03-120936-002 03-120981-002 03-120988-002 03-122009-002 03-122011-002 03-122027-002 03-122078-002 03-122104-002 03-122126-002 03-122222-002 03-122239-002 03-122290-002 03-122314-002 03-122453-002 03-122455-002 03-122488-002 03-122490-002 03-122513-002 03-122518-002

37 103 92 115 132 76 86 105 89 120 66 64 117 108 119 119 45 112 109 54 107 127 102

P R A R A R AE N B R AI R R Q O O AL S I S R R R

Spoke Spoke Spoke Disc Spoke Disc Disc Spoke Spoke Spoke Spoke Spoke Spoke/Disc Spoke Disc Spoke Spoke Disc Spoke Spoke Spoke Disc Disc

15 x 3 16.5 x 7 16.5 x 5 16.5 x 7 18 x 7 15 x 4 16.5 x 5 16.5 x 7 15 x 7 16.5 x 7 15 x 4 15 x 4 16.5 x 7 16.5 x 7 16.5 x 7 16.5 x 7 15 x 3 16.5 x 7 16.5 x 7

4.130 8.440 6.120 10.690 8.250 7.840 8.580 8.650 8.510 8.940 5.260 5.840 8.750 8.410 8.940 8.940 4.690 10.380 8.030

3.560 7.380 5.370 7.530 7.440 4.440 5.480 7.650 7.360 7.630 4.310 4.540 7.500 7.630 7.630 7.630 3.500 7.440 7.440 6.530 7.400 9.330 7.500

10.000 11.000 9.250 9.438 11.000 8.660 8.660 10.500 10.500 9.500 9.500 9.250 9.500 9.440 9.500 9.500 6.445 8.530 14.250 8.500 11.250 9.438 9.500

11.000 12.500 11.250 11.250 12.750 11.250 11.250 12.750 12.750 11.250 11.250 11.250 11.250 11.000 11.250 11.250 8.000 11.250 12.750 10.000 12.750 11.250 11.250

5 6 10 6 10 10 5 5 5 6 6 10

0.531 0.781 0.843 0.656 1.265 1.265 0.781 0.781 0.781

Replaces 03-120375

5/6 .656/.656 Replaces 03-120152

outboard mount outboard mount For Lucas Girling Rear Brake Replaces 03-122032,

0.781 0.781 0.844

13-122078, 03-122593

5/6 .781/.656 Notched for ABS 10 6 5 10 0.844 0.781 0.656 0.812 Replaces 03-012358, Replaces 03-122208, 13-122208 Notched for ABS Replaces 13-122314

5/6 .656/.656 Peripheral Pilot 6/6 5/6 10 10 .656/.656 03-120947, 03-122322 .781/.781 0.843 0.813 Outboard Mount Standard Weight 03-122126

12.25 x 5.5 7.440 16.5 x 7 8.450

16.5 x 8.625 12.270 16.5 x 7 8.750

15

NUMERICAL LISTING

CAST BRAKE DRUMS, CAST -- NON-BALANCED (Cont'd.)

PART NO. 03-122529-002 03-122550-002 03-122561-002 03-122562-002 03-122575-002 03-122597-002 03-122603-002 03-122607-002 03-122683-002 03-122921-002 03-122925-002 03-122947-002 03-122948-002 03-122963-002 03-122964-002 03-122966-002 WEIGHT DRUM TYPE

S AE S S S P N R R AC I A AD P A AC

WHEEL TYPE

Disc Disc Disc Disc Spoke Disc Spoke Disc Spoke Disc Spoke Spoke Disc Spoke Spoke Disc

BRAKE SIZE

15 x 4 16.5 x 7 15 x 5 15 x 5 15 x 4 14 x 2.5 16.5 x 7 16.5 x 7 16.5 x 7 15 x 4 16.5 x 7 15 x 4 16.5 x 7

OVER- BRAKE ALL SURFACE DEPTH WIDTH

8.860 10.590 7.990 7.990 5.540 4.030 8.750 10.630 8.450 8.980 8.030 5.600 10.310 4.530 7.750 5.720 5.720 4.440 3.000 7.500 7.820 7.390 5.090 7.440 4.680 7.640 8.000 4.690 5.740

PILOT DIA.

8.750 9.000 6.440 6.440 9.188 4.600 9.440 8.530 11.250 8.750 14.250 11.000 9.000 8.501 11.000 8.750

BOLT HOLE BOLT CIRCLE NO. SIZE

11.250 11.250 8.750 8.750 11.250 6.000 11.000 11.250 12.750 11.250 12.750 12.750 11.250 10.000 12.750 11.250 10 10 10 6 6 5 10 1.281 0.812 0.781 0.843 0.531 0.780 0.812

DESCRIPTION/ COMMENTS

Outboard Mount Replaces 13-122529 Cast unbalanced Replaces 03-120109 Use 13-123057

88 106 73 72 60 34 103 117 106 84 109 61 116 66 61 96

5/6 .656/.656 Replaces 03-120980

Replaces 03-012889, 5/6 .781/.781 20025, 20451, 122079, 122083,122102 10 5 6 10 0.812 0.781 0.781 0.812 6 Holes Equally 12.25 x 7.5 8.810 15 x 4 16.5 x 5 5.560 9.630 6/6 .656/.656 Spaced and 6 Paired Holes Equally Spaced 5 10 0.781 0.812 Outboard Mount; Hub Requires a Peripheral Pilot

03-122978-002

112

R

Disc

16.5 x 7

10.630

7.820

8.534

11.250

10

0.812

.25" x 450 chamfer do not subsitute 03-122607 Uni mount version of 03-120981 335mm bolt circle for use with hub piloted systems only 335mm bolt circle -

03-123020-002

69

S

Disc

15 x 4

7.840

4.440

8.780

11.250

10

1.265

03-123024-002

82

B

Disc

15 x 4

8.870

4.530

11.252

13.189

10

0.937

03-123025-002 03-123058-002 03-123200-002 03-123207-002 03-123219-002 03-123254-002 03-123276-002

114 111 109 112 90 79 96

S R N AD P AD AD

Disc Spoke Spoke Disc Disc Disc Disc

16.5 x 7 16.5 x 7 16.5 x 7 16.5 x 7 16.5 x 5 15 x 4 15 x 7

10.590 8.750 8.650 10.540 9.160 8.790 10.920

7.750 7.500 7.650 7.460 5.540 4.650 7.500

11.252 9.500 10.501 8.781 11.252 8.780 8.991

13.189 11.250 12.750 11.250 13.189 11.250 10.827

10 6 6 10 10 10 8

0.937 0.780 0.781 0.937 0.937 1.250

for use with hub piloted systems only cast unbalanced outboard mount 335mm bolt circle for use with hub piloted systems only 275mm bolt circle

0.844

For Lucas Girling Rear Brake 335mm bolt circle -

03-123302-002

109

R

Disc

16.5 x 6

9.750

6.630

11.250

13.189

10

0.937

for use with hub piloted systems only

16

NUMERICAL LISTING

CAST BRAKE DRUMS, CAST -- NON-BALANCED (Cont'd.)

PART NO. 03-123331-002 03-123365-002 03-123366-002 03-123382-002 03-123396-002 03-123397-002 03-123398-002 03-123406-002 WEIGHT DRUM TYPE

84 122 70 69 84 117 111 142 R AD AD AD AD AD R R

WHEEL TYPE

Disc Disc Disc Disc Disc Disc Disc Disc

BRAKE SIZE

15 x 6 16.5 x 7 15 x 4 15 x 4 15 x 4 16.5 x 7 16.5 x 7

OVER- BRAKE ALL SURFACE DEPTH WIDTH

8.790 10.590 8.850 8.850 8.970 10.310 9.500 6.750 7.750 4.560 4.750 5.090 7.640 7.560 9.130

PILOT DIA.

8.992 8.780 8.780 8.780 8.782 8.780 8.440 8.780

BOLT HOLE BOLT CIRCLE NO. SIZE

10.827 11.250 11.250 11.250 11.250 11.250 11.250 11.250 8 10 10 10 10 10 10 10 0.844 0.937 0.937 1.281 0.937 0.937 0.843

DESCRIPTION/ COMMENTS

275mm bolt circle 285.75mm bolt circle 285.75mm Bolt Circle Heavy duty version of 03-123420-002

Outboard Mount; 16.5x8.625 11.980 0.937 285.75mm Bolt circle - heavy duty 03-122513

03-123409-002 03-123427-002 03-123428-002 03-123430-002 03-123431-002 03-123448-002 03-123466-002 03-123493-002

123 125 142 105 65 74 121 90

AD R R N R AD Z AD

Disc Spoke Disc Spoke Spoke Disc Disc Disc

16.5 x 7 16.5 x 6

10.590 7.490

7.750 6.690 9.480 7.650 4.750 4.650 8.830 6.750

9.000 11.250 8.780 10.500 9.251 8.780 8.780 8.782

10.827 12.750 11.250 12.750 11.250 11.250 11.250 11.250

8 6 10

0.937 0.781 0.937 Use 83- or 93-120877 double drilled

16.5x8.625 12.330 16.5 x 7 15 x 4 15 x 4 8.650 5.840 9.100

5/6 .781/.781 03-122009, 03-123200 similar to 03-122104 6 10 10 10 0.781 1.281 1.000 285.75mm bolt 0.937 circle / rated axle cap. 15,000 lb double drilled except .25" deeper / replaces 13-123431

15 x 8.625 12.200 15 x 6 8.810

03-123500-002

89

R

Spoke/Disc

16.5 x 5

6.410

5.440

10.000

12.750 5/6/7

0.781

03-122266 & 03-122267

CAST BRAKE DRUMS, BALANCED -- WELD-TO-BALANCE

13-012582-002 13-120134-002 13-120142-002 13-120149-002 13-120459-002 13-120516-002 13-120586-002 13-120743-002 13-120747-002 13-120754-002 13-120855-002 13-120936-002

118 110 134 110 60 75 116 109 130 103 92 132 R BA S T AH A R K S R A A Disc Disc Spoke Disc Spoke Spoke Spoke Spoke Disc Spoke Spoke Spoke 16.5 x 7 16.5 x 7 16.5 x 7 16.5 x 7 15 x 3.5 15 x 6 16.5 x 7 16.5 x 7 16.5 x 7 16.5 x 7 16.5 x 5 18 x 7 9.500 9.062 8.875 8.620 5.310 7.030 8.750 7.940 9.062 8.440 6.120 8.250 7.560 7.750 7.750 7.440 4.190 6.460 7.500 7.310 7.750 7.380 5.370 7.440 9.440 9.500 11.000 8.660 10.000 9.440 9.500 11.000 11.000 11.000 9.250 11.000 11.250 11.250 12.750 11.250 11.250 11.000 11.250 12.750 13.188 12.500 11.250 12.750 10 10 6 10 5 5 6 10 6 6 0.840 contains 0.812 0.656 0.812 0.531 0.650 0.656 0.796 0.781 0.656 Balanced - Replaces 03-120936 Replaces 03-120743 circumferential ribs for cooling Balanced

5/6 .781/.656

5/6 .656/.656

17

NUMERICAL LISTING

CAST BRAKE DRUMS, BALANCED -- WELD-TO-BALANCE (Cont'd.)

PART NO. DRUM WEIGHT TYPE WHEEL TYPE BRAKE SIZE OVER- BRAKE ALL SURFACE DEPTH WIDTH

8.940 6.690 6.680 5.840 8.940 6.410 8.940 5.880 4.690 8.440 8.440 10.380 7.630 5.410 5.400 4.540 7.620 5.440 7.630 4.960 3.500 7.380 7.380 7.440

PILOT DIA.

BOLT CIRCLE

BOLT HOLE NO. SIZE

DESCRIPTION/ COMMENTS

Balanced; Notched for

13-122027-002 13-122038-002 13-122039-002 13-122104-002 13-122239-002 13-122266-002 13-122290-002 13-122296-002 13-122314-002 13-122328-002 13-122329-002 13-122453-002

120 88 76 64 109 89 120 61 45 108 108 112

R R A R O R O A Al R R S

Spoke Spoke Spoke Spoke Disc Spoke Spoke Spoke Spoke/Disc Spoke Spoke Disc

16.5 x 7 16.5 x 5 15 x 5 15 x 4 16.5 x 7 16.5 x 5 16.5 x 7 15 x 4 15x3 16.5 x 7 16.5 x 7 16.5 x 7

9.500 10.000 10.000 9.251 9.500 10.000 9.500 10.000 6.445 11.000 11.000 8.530

11.250 12.750 12.750 11.250 11.250 12.750 11.250 12.750 8.000 12.500 12.500 11.250

5 6 6 6 10 6 6 6 5 5 6 10

0.781 0.781 0.780

ABS - Use 03-122027 less ABS / Balance

Ford Application, 0.781 0.810 0.781 0.781 0.781 0.656 0.656 0.656 0.812 Balanced; Outboard Mount - Use 03-122529 less balance Balanced Use 13-123057 Notched for ABS Replaces 03-122296 Balanced - Use 03-122314 less balance Rated Axle Capacity 12,000 Lbs.

13-122529-002

89

S

Disc

15 x 4

8.860

4.530

8.750

11.250

10

1.281

13-122597-002 13-122600-002 13-122607-002 13-122683-002 13-122806-002 13-122990-002 13-123024-002

34 107 117 106 105 119 82

P L R R AD N B

Disc Spoke Disc Spoke Disc Spoke Disc

14 x 2.5 16.5 x 7 16.5 x 7 16.5 x 7 15 x 7 16.5 x 7 15 x 4

4.030 7.940 10.630 8.450 10.930 8.750 8.870

3.000 7.310 7.820 7.390 7.500 7.500 4.530

4.600 11.000 8.530 11.250 6.440 9.500 11.252

6.000 12.750 11.250 12.750 8.750 11.250 13.189

6

0.531

5/6 .656/.656 10 6 5 10 0.812 0.812 0.781 335mm bolt circle 0.937 for use with hub piloted systems only 335mm bolt circle Outboard mount 5/6 .781/.781 Balanced

13-123025-002

114

S

Disc

16.5 x 7

10.590

7.750

11.252

13.189

10

0.937

for use with hub piloted systems only 335mm bolt circle -

13-123219-002 13-123383-002 13-123389-002

90 96 79

P AD A

Disc Disc Spoke

16.5 x 5 16.5 x 5 16.5 x 5

9.160 9.140 6.570

5.540 5.500 6.010

11.252 8.780 11.001

13.189 11.250 12.750

10 10 5

0.937 1.281 0.781

for use with hub piloted systems only

18

NUMERICAL LISTING

STEELLITE X30 BRAKE DRUMS

PART NO. 53-123512-002 53-123519-002 53-123535-002 53-123537-002 53-123542-002 53-123544-002 53-123564-002 53-123565-002 53-123566-002 53-123567-002 53-123568-002 53-123575-002 53-123579-002 53-123580-002 53-123581-002 53-123582-002 53-123583-002 53-123584-002 53-123588-002 53-123589-002 53-123590-002 53-123591-002 53-123592-002 53-123593-002 53-123594-002 53-123596-002 53-123597-002 53-123598-002 53-123599-002 53-123600-002 53-123601-002 53-123602-002 53-123605-002 53-123606-002 53-123607-002 53-123608-002 DRUM WEIGHT TYPE

66 88 95 92 66 102 92 92 92 66 66 64 106 106 106 91 90 90 79 79 79 80 80 80 80 104 103 70 70 70 90 90 77 77 87 87 AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD

WHEEL TYPE

Disc Spoke Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc

BRAKE SIZE

16.5 x 7 16.5 x 7 16.5 x 8 16.5 x 7 15 x 4

OVER- BRAKE ALL SURFACE DEPTH WIDTH

8.600 8.230 10.960 10.380 8.890 4.860 7.580 8.620 7.870 7.760 9.150 7.860 7.860 7.860 5.110 4.760 4.760 9.38 9.380 9.380 7.270 7.270 7.270 5.820 5.820 5.820 7.420 7.420 7.42 7.420 9.100 9.100 5.810 5.810 5.810 9.110 9.110 5.870 5.870 6.680 6.680

PILOT DIA.

BOLT CIRCLE

BOLT HOLE NO. SIZE

1.250

DESCRIPTION/ COMMENTS

Axle Capacity 13,200 lbs. Axle Capacity 23,000 lbs. Axle Capacity 23,000 lbs. Axle Capacity 23,000 lbs. Axle Capacity 13,200 lbs. Axle Capacity 23,000 lbs. Axle Capacity 23,000 lbs. Axle Capacity 23,000 lbs. Axle Capacity 23,000 lbs. Axle Capacity 13,200 lbs. Axle Capacity 13,200 lbs. Axle Capacity 23,000 lbs.

8.780 285.75mm 10 9.438 11.000

5/5 .781/.656 0.937 0.960 1.250 0.932 0.810 0.810 0.920 0.960 0.960 0.937 0.937 0.812 0.937 0.812 0.937 0.937 0.937 1.281 1.281 0.937 0.812 0.812 0.937 0.812 0.937 1.281 0.937 0.937 0.937 0.937 1.281 1.281 0.937 1.281

8.780 285.75mm 10 8.780 285.75mm 10 8.780 285.75mm 10 8.780 8.530 9.000 9.000 11.250 11.250 11.250 275mm 10 10 10 8

16.5x8.625 11.040 16.5 x 7 16.5 x7 16.5 x 7 15 x 4 15 x 4 15 x 4 10.380 10.380 10.380 8.640 8.890 8.890

8.780 285.75mm 10 8.780 285.75mm 10 9.000 9.000 8.530 8.531 9.000 9.000 8.780 8.530 8.530 9.000 9.000 8.531 8.780 9.000 10.827 275mm 11.25 11.25 275mm 275mm 11.25 11.25 11.25 11.25 275mm 11.25 11.25 275mm 8 8 10 10 8 8 10 10 10 10 8 10 10 8

16.5x8.625 12.150 16.5x8.625 12.150 16.5x8.625 12.150 16.5 x 7 16.5 x 7 16.5 x 7 16.5 x 5 16.5 x 5 16.5 x 5 15 x 7 15 x 7 15 x 7 15 x 7 10.040 10.040 10.040 9.220 9.220 9.220 10.220 10.220 10.22 10.220

8.780 285.75mm 10 8.783 285.75mm 10

8.780 285.75mm 10

16.5x8.625 11.870 16.5x8.625 11.870 15 x 5 15 x 5 15 x 5 15 x 8.625 15 x 8.62 16.5 x 5 16.5 x 5 16.5 x 6 16.5 x 6 9.530 9.530 9.530 11.440 11.440 8.590 8.590 9.620 9.620

8.783 285.75mm 10

8.780 285.75mm 10 8.780 285.75mm 10 9.000 8.530 8.780 8.780 275mm 11.25 11.25 11.25 8 10 10 10

8.780 285.75mm 10

19

NUMERICAL LISTING

X - 10 SERIES CAST BRAKE DRUMS, NON-BALANCED

PART NO. 83-012582-002 83-120877-002 83-122126-002 83-122222-002 83-122550-002 83-122603-002 83-122607-002 83-123200-002 83-123365-002 83-123366-002 83-123406-002 83-123409-002 83-123428-002 DRUM WEIGHT TYPE

114 115 117 108 106 101 117 109 122 70 142 123 142 R R R Q AE N R N AD AD R AD R

WHEEL TYPE

Disc Disc Spoke/Disc Spoke Disc Spoke Disc Spoke Disc Disc Disc Disc Disc

BRAKE SIZE

16.5 x 7 16.5 x 7 16.5 x 7 16.5 x 7 16.5 x 7 16.5 x 7 16.5 x 7 16.5 x 7 16.5 x 7 15 x 4

OVER- BRAKE PILOT ALL SURFACE DIA. DEPTH WIDTH

9.500 10.690 8.750 8.410 10.590 8.750 10.630 8.650 10.590 8.850 7.500 7.530 7.500 7.630 7.750 7.563 7.820 7.650 7.750 4.560 9.130 7.750 9.480 9.438 9.438 9.500 9.440 9.000 9.440 8.530 10.502 8.780 8.780 8.780 8.780 8.780

BOLT CIRCLE

11.250 11.250 11.250 11.000 11.250 11.000 11.250 12.750 11.250 11.250 11.250 10.827 11.250

BOLT HOLE NO.

10 10 10 10 5 10 6 10 10 10 8 10

SIZE

0.843 0.843 0.844 0.812 0.781 0.812 0.781 0.937 0.937 0.937 0.937 0.937

DESCRIPTION/ COMMENTS

5/6 .781/.656

outboard mount 285.75mm bolt circle 285.75mm bolt circle outboard mount 285.75mm bolt circle 275mm bolt circle use 22mm bolt

16.5 x 8.625 11.980 16.5 x 7 10.590

16.5 x 8.625 12.330

CAST BRAKE DRUMS, "MACHINE-TO-BALANCE" (MTB)

85-120517-002 85-120877-002 85-122009-002 85-122011-002 85-122103-002 85-122126-002 85-122490-002 85-122518-002 85-122550-002 85-122921-002 85-122947-002 85-122948-002 85-122954-002 85-122964-002 85-122966-002 85-123200-002 85-123203-002 85-123207-002 85-123254-002 85-123297-002 85-123345-002 85-123348-002 85-123365-002 85-123366-002 85-123396-002 85-123409-002 85-123431-002 85-123463-002 85-123465-002 85-123466-002 85-123470-002

76 115 104 89 118 117 107 102 106 84 61 116 79 61 96 109 90 111 69 119 68 104 122 70 84 123 65 97 90 121 135 S R N B R R R R AE AC A AD A A AC N B AD AD AD AD AD AD AD AD AD R AD Z Z Z Spoke Disc Spoke Spoke Spoke Spoke Disc Disc Disc Spoke Disc Spoke Spoke Disc Spoke Spoke Disc Disc Disc Disc Spoke Disc Disc Disc Disc Spoke Disc Disc Disc Disc 15 x 5 16.5 x 7 16.5 x 7 15 x 7 16.5 x 7 16.5 x 7 16.5 x 7 16.5 x 7 15 x 4 15 x 4 16.5 x 7 16.5 x 5 15 x 4 16.5 x 5 16.5 x 7 15 x 7 16.5 x 7 15 x 4 16.5 x 7 15 x 4 16.5 x 7 16.5 x 7 15 x 4 15 x 4 16.5 x 7 15 x 4 16.5 x 5 15 x 5 6.590 10.690 8.650 8.510 8.750 8.750 8.450 8.750 10.590 8.980 5.600 10.310 6.570 5.560 9.630 8.650 8.510 10.540 8.850 10.310 8.760 10.920 10.590 8.850 8.970 10.590 5.840 9.630 10.080 5.560 7.530 7.656 7.360 7.500 7.500 7.400 7.500 7.750 5.090 4.680 7.640 6.010 4.690 5.740 7.650 7.360 7.460 4.460 7.640 4.640 7.750 7.750 4.560 5.090 7.750 4.750 5.740 6.340 8.830 9.580 9.438 9.438 10.500 10.500 9.500 9.500 11.250 9.500 9.000 8.750 11.000 9.000 11.000 11.000 8.750 10.502 10.502 8.781 8.781 9.000 8.996 8.992 8.780 8.780 8.782 8.780 9.251 8.780 8.780 8.780 9.000 11.000 11.250 12.750 12.750 11.250 11.250 12.750 11.250 11.250 11.250 12.750 11.250 12.750 12.750 11.250 12.750 12.750 11.250 11.250 11.250 10.827 10.827 11.250 11.250 11.250 10.827 11.250 11.250 11.250 11.250 10.930 5 10 5 5 5 10 10 10 10 6 10 6 5 10 6 6 10 10 10 8 8 10 10 10 8 6 10 10 10 8 0.656 0.843 0.781 0.781 0.781 0.844 0.813 0.812 0.812 0.781 0.812 0.781 0.781 0.812 0.781 0.781 0.937 1.281 0.846 0.844 0.844 0.937 0.937 0.937 0.937 0.781 0.937 0.937 0.937 0.937 GMC application 275mm bolt circle 285.75mm bolt circle 285.75mm bolt circle Ford application

Spoke/Disc 16.5 x 7

5 / 6 .781 /.781

15 x 8.625 12.200 16 x 8.625 11.760

20

NUMERICAL LISTING

CAST BRAKE DRUMS, "MACHINE-TO-BALANCE" (MTB) (Cont'd.)

PART NO. 85-123520-002 85-123548-002 85-123553-002 DRUM WEIGHT TYPE

135 110 90 AD G A

WHEEL TYPE

Disc Disc Disc

BRAKE SIZE

16.5 x 8 15 x 7 15 x 4

OVERALL DEPTH

11.090 10.180 9.070

BRAKE SURFACE WIDTH

8.910 7.560 4.720

PILOT DIA.

8.779 8.700 11.064

BOLT CIRCLE

11.250 10.827 13.189

BOLT HOLE NO.

10 8 10

SIZE

0.937 0.847 1.024

DESCRIPTION/ COMMENTS

axle cap 23,000 lb 275mm bolt circle / Ford no. 86HU-1126-CA 335mm bolt circle / Ford no. 86UH-1125-BA

85-123561-002 85-123569-002 85-123570-002

115 85 138

Z Z Z

Disc Disc Disc

16.5 x 6 16.5 x 6

9.832 9.906

6.820 6.880 9.110

11.712 9.139 8.779

13.729 11.250 11.250

10 10 10

.975 1.334 0.937

Meritor front drum 285.75mm bolt circle / front drum

16.5 x 8.625 11.250

X - 10 SERIES CAST BRAKE DRUMS, "MACHINE-TO-BALANCE" (MTB)

95-012582-002 95-122126-002 95-122222-002 95-122550-002 95-122603-002 95-122607-002 95-123207-002 95-123254-002 95-123345-002 95-123365-002 95-123366-002 95-123409-002 95-123428-002 95-123466-002 95-123570-002

118 117 108 106 101 117 111 79 68 122 70 123 140 121 139 R R Q AE N R AD AD AD AD AD AD R Z Z Disc Spoke/Disc Spoke Disc Spoke Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc 16.5 x 7 16.5 x 7 16.5 x 7 16.5 x 7 16.5 x 7 16.5 x 7 16.5 x 7 15 x 4 15 x 4 16.5 x 7 15 x 4 16.5 x 7 9.500 8.750 8.410 10.590 8.750 10.630 10.540 8.790 8.760 10.590 8.850 10.590 7.560 7.500 7.630 7.750 7.563 7.820 7.460 4.650 4.640 7.750 4.560 7.750 9.480 8.830 9.110 9.440 9.500 9.440 9.000 9.440 8.530 8.781 8.781 8.996 8.780 8.780 8.780 8.780 8.780 8.779 11.250 11.250 11.000 11.250 11.000 11.250 11.250 11.250 10.827 11.250 11.250 10.827 11.250 11.250 11.250 10 10 10 5 10 10 10 8 10 10 8 10 10 10 0.840 0.844 0.812 0.781 0.812 0.937 1.250 0.844 0.937 0.937 0.937 0.937 1.000 0.937 275mm bolt circle 285.75mm bolt circle

5/6 .781/.656

16.5 x 8.625 12.330 15 x 8.625 12.200 16.5 x 8.625 11.250

21

BRAKE DIAMETER CHART

OVERALL DEPTH BRAKE SURFACE WIDTH PILOT DIA. BOLT CIRCLE BOLT HOLES NO. SIZE WEIGHT PART NO. DRUM TYPE WHEEL TYPE

12.25" X 5.5" BRAKE DIAMETER

7.440 6.530 8.500 10.000 6/6 .656/.656 54

03-122488-002

S

Spoke

12.25" X 7.5" BRAKE DIAMETER

8.810 8.000 8.501 10.000 6/6 .656 / .656 66

03-122963-002

P

Spoke

14" X 2.5" BRAKE DIAMETER

4.030 4.030 3.000 3.000 4.600 4.600 6.000 6.000 6 6 0.531 0.531 34 34

03-122597-002 13-122597-002

P P

Disc Disc

15" X 3" BRAKE DIAMETER

4.130 4.690 4.690 3.560 3.500 3.500 10.000 6.445 6.445 11.000 8.000 8.000 5 5 5 0.531 0.656 0.656 37 45 45

03-120705-002 03-122314-002 13-122314-002

P AL Al

Spoke Spoke Spoke / Disc

15" X 3.5" BRAKE DIAMETER

5.310 5.310 4.190 4.190 10.000 10.000 11.250 11.250 5 5 0.531 0.531 60 60

03-120459-002 13-120459-002

AH AH

Spoke Spoke

15" X 4" BRAKE DIAMETER

5.260 5.540 5.560 5.560 5.600 5.600 5.840 5.840 5.840 5.840 5.880 7.840 7.840 8.600 8.640 8.760 8.760 8.790 8.790 8.790 8.850 8.850 8.850 8.850 8.850 8.850 4.310 4.440 4.690 4.690 4.680 4.680 4.540 4.540 4.750 4.750 4.960 4.440 4.440 4.860 5.110 4.640 4.640 4.650 4.650 4.650 4.560 4.560 4.560 4.560 4.750 4.460 9.500 9.188 11.000 11.000 11.000 11.000 9.250 9.250 9.251 9.251 10.000 8.660 8.780 8.780 8.780 8.996 8.996 8.780 8.781 8.781 8.780 8.780 8.780 8.780 8.780 8.781 11.250 11.250 12.750 12.750 12.750 12.750 11.250 11.250 11.250 11.250 12.750 11.250 11.250 285.75mm 285.75mm 10.827 10.827 11.250 11.250 11.250 11.250 11.250 11.250 11.250 11.250 11.250 6 5/6 5 5 6 6 6 6 6 6 6 10 10 10 10 8 8 10 10 10 10 10 10 10 10 10 0.781 .656 / .656 0.781 0.781 0.781 0.781 0.781 0.781 0.781 0.781 0.781 1.265 1.265 1.250 0.960 0.844 0.844 1.250 1.250 1.250 0.937 0.937 0.937 0.937 1.281 1.281 66 60 61 61 61 61 64 64 65 65 61 76 69 66 66 68 68 79 79 79 70 70 70 70 69 69

03-122078-002 03-122575-002 03-122964-002 85-122964-002 03-122947-002 85-122947-002 03-122104-002 13-122104-002 03-123431-002 85-123431-002 13-122296-002 03-120981-002 03-123020-002 53-123512-002 53-123567-002 85-123345-002 95-123345-002 03-123254-002 93-123254-002 95-123254-002 03-123366-002 83-123366-002 85-123366-002 95-123366-002 03-123382-002 85-123254-002

AI S A A A A R R R R A R S AD AD AD AD AD AD AD AD AD AD AD AD AD

Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc

22

BRAKE DIAMETER CHART

OVERALL DEPTH BRAKE SURFACE WIDTH PILOT DIA. BOLT CIRCLE BOLT HOLES NO. SIZE WEIGHT PART NO. DRUM TYPE WHEEL TYPE

15" X 4" BRAKE DIAMETER (Cont'd.)

8.850 8.860 8.860 8.870 8.870 8.890 8.890 8.890 8.970 8.970 8.980 8.980 9.070 9.100 4.660 4.530 4.530 4.530 4.530 7.760 4.760 4.760 5.090 5.090 5.090 5.090 4.720 4.650 8.779 8.750 8.750 11.252 11.252 8.780 8.780 8.996 8.782 8.782 8.750 8.750 11.064 8.780 11.250 11.250 11.250 13.189 13.189 285.75mm 285.75mm 10.827 11.250 11.250 11.250 11.250 13.189 11.250 10 10 10 10 10 10 10 8 10 10 10 10 10 10 0.937 1.281 1.281 0.937 0.937 1.250 0.960 0.937 0.937 0.937 0.812 0.812 1.024 1.281 80 88 89 82 82 66 66 64 84 84 84 84 90 74

85-123421-002 03-122529-002 13-122529-002 03-123024-002 13-123024-002 53-123542-002 53-123568-002 53-123575-002 03-123396-002 85-123396-002 03-122921-002 85-122921-002 85-123553-002 03-123448-002

AD S S B B AD AD AD AD AD AC AC A AD

Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc

15" X 5" BRAKE DIAMETER

6.590 6.590 6.680 7.220 7.990 7.990 8.200 10.080 5.560 5.560 5.400 5.500 5.720 5.720 5.470 6.340 9.438 9.438 10.000 6.250 6.440 6.440 8.992 8.780 11.000 11.000 12.750 8.750 8.750 8.750 10.827 11.250 5 5 6 6 10 6 8 10 0.656 0.656 0.780 0.844 0.781 0.843 0.844 0.937 76 76 76 74 73 72 73 90

03-120517-002 85-120517-002 13-122039-002 03-120553-002 03-122561-002 03-122562-002 13-123332-002 85-123465-002

S S A S S S AL Z

Spoke Spoke Spoke Disc Disc Disc Disc Disc

15" X 6" BRAKE DIAMETER

7.030 7.090 8.790 8.790 8.810 6.460 6.500 6.750 6.750 6.750 9.440 9.438 8.992 8.992 8.782 11.000 11.000 10.827 10.827 11.250 5 5 8 8 10 0.650 0.656 0.844 0.844 0.937 75 83 84 84 90

13-120516-002 03-120516-002 03-123331-002 85-123331-002 03-123493-002

A A R R AD

Spoke Spoke Disc Disc Disc

15" X 7" BRAKE DIAMETER

8.510 8.510 8.510 9.530 10.180 10.920 10.920 10.930 7.360 7.360 7.360 7.560 7.560 7.500 7.500 7.500 10.500 10.500 10.502 9.750 8.700 8.991 8.991 6.440 12.750 12.750 12.750 11.250 10.827 10.827 10.827 8.750 5 5 6 5 8 8 8 6 0.781 0.781 0.781 0.656 0.847 0.844 0.844 0.812 89 89 90 111 110 96 96 105

03-122011-002 85-122011-002 85-123203-002 03-120933-002 85-123548-002 03-123276-002 85-123276-002 13-122806-002

B B B AJ G AD AD AD

Spoke Spoke Spoke Spoke / Disc Disc Disc Disc Disc

15" X 8.625" BRAKE DIAMETER

12.200 12.200 12.200 8.830 9.580 8.830 8.780 8.780 8.780 11.250 11.250 11.250 10 10 10 1.000 0.937 1.000 121 121 121

03-123466-002 85-123466-002 95-123466-002

Z Z Z

Disc Disc Disc

23

BRAKE DIAMETER CHART

OVERALL DEPTH BRAKE SURFACE WIDTH PILOT DIA. BOLT CIRCLE BOLT HOLES NO. SIZE WEIGHT PART NO. DRUM TYPE WHEEL TYPE

16.5" X 5" BRAKE DIAMETER

6.120 6.120 6.410 6.410 6.570 6.570 6.690 9.140 9.160 9.160 9.630 9.630 9.630 6.410 8.580 5.370 5.370 5.440 5.440 6.010 6.010 5.410 5.500 5.540 5.540 5.740 5.740 5.740 5.440 5.480 9.250 9.250 10.000 10.000 11.001 11.000 10.000 8.780 11.252 11.252 8.750 8.750 8.780 10.000 8.660 11.250 11.250 12.750 12.750 12.750 12.750 12.750 11.250 13.189 13.189 11.250 11.250 11.250 12.750 11.250 6 6 6 6 5 6 6 10 10 10 10 10 10 5/6/7 10 0.781 0.781 0.781 0.781 0.781 0.781 0.781 1.281 0.937 0.937 0.812 0.812 0.937 0.781 1.265 92 92 89 89 79 79 88 96 90 90 96 96 97 89 86

03-120855-002 13-120855-002 03-122266-002 13-122266-002 13-123389-002 85-122954-002 13-122038-002 13-123383-002 03-123219-002 13-123219-002 03-122966-002 85-122966-002 85-123463-002 03-123500-002 03-120988-002

A A R R A A R AD P P AC AC AD R AE

Spoke Spoke Spoke Spoke Spoke Spoke Spoke Disc Disc Disc Disc Disc Disc Spoke / Disc Disc

16.5" X 6" BRAKE DIAMETER

9.750 9.832 9.906 6.630 6.820 6.880 11.250 11.712 9.139 13.189 13.729 11.250 10 10.000 10.000 0.937 .975 1.334 109 115 85

03-123302-002 85-123561-002 85-123569-002

R Z Z

Disc Disc Disc

16.5" X 7" BRAKE DIAMETER

7.940 7.940 8.030 8.030 8.230 8.410 8.410 8.410 8.440 8.440 8.440 8.440 8.450 8.450 8.450 8.450 8.620 8.620 8.650 8.650 8.650 8.650 8.650 8.650 8.656 8.720 7.310 7.310 7.440 7.440 7.580 7.630 7.630 7.630 7.380 7.380 7.380 7.380 7.400 7.400 7.390 7.390 7.440 7.440 7.650 7.656 7.650 7.650 7.650 7.650 7.500 7.560 11.000 11.000 14.250 14.250 9.438 9.440 9.440 9.440 11.000 11.000 11.000 11.000 11.250 11.250 11.250 11.250 8.660 8.660 10.500 10.500 10.501 10.502 10.502 10.500 11.000 11.250 12.750 12.750 12.750 12.750 11.000 11.000 11.000 11.000 12.500 12.500 12.500 12.500 12.750 12.750 12.750 12.750 11.250 11.250 12.750 12.750 12.750 12.750 12.750 12.750 12.500 12.750 6.000 5/6 5/6 5 5/5 5/6 5/6 5/6 5/6 5/6 5 6 5/6 5/6 5/6 5/6 10 10 5 5 6 6 6 5/6 5 5 0.656 .656 / .656 .656 / .656 0.781 .781 / .656 .781 / .656 .781 / .656 .781 / .656 .656 / .656 .656 / .656 0.656 0.656 .781/.781 .781 /.781 .781 / .781 .781/.781 0.812 0.812 0.781 0.781 0.781 0.781 0.781 .781 / .781 0.656 0.781 109 107 109 109 88 108 108 108 103 103 108 108 107 107 106 106 110 110 105 104 109 109 109 105 106 103

13-120743-002 13-122600-002 03-122455-002 03-122925-002 53-123519-002 03-122222-002 83-122222-002 95-122222-002 03-120754-002 13-120754-002 13-122328-002 13-122329-002 03-122490-002 85-122490-002 03-122683-002 13-122683-002 03-120149-002 13-120149-002 03-122009-002 85-122009-002 03-123200-002 83-123200-002 85-123200-002 03-123430-002 03-120442-002 03-120574-002

K L I I AD Q Q Q R R R R R R R R T T N N N N N N R R

Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke Disc Disc Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke

24

BRAKE DIAMETER CHART

OVERALL DEPTH BRAKE SURFACE WIDTH PILOT DIA. BOLT CIRCLE BOLT HOLES NO. SIZE WEIGHT PART NO. DRUM TYPE WHEEL TYPE

16.5" X 7" BRAKE DIAMETER (Cont'd.)

8.750 8.750 8.750 8.750 8.750 8.750 8.750 8.750 8.750 8.750 8.750 8.750 8.750 8.750 8.875 8.940 8.940 8.940 8.940 8.940 8.940 9.000 9.062 9.062 9.500 9.500 9.500 9.500 9.500 10.040 10.040 10.040 10.310 10.310 10.310 10.310 10.380 10.380 10.380 10.380 10.380 10.380 10.540 10.540 10.540 10.590 10.590 10.590 10.590 7.500 7.500 7.500 7.500 7.500 7.500 7.500 7.500 7.500 7.500 7.563 7.563 7.500 7.500 7.750 7.630 7.630 7.630 7.620 7.630 7.630 7.600 7.750 7.750 7.560 7.560 7.500 7.560 7.560 7.270 7.270 7.270 7.640 7.640 7.640 7.640 7.440 7.440 7.870 7.860 7.860 7.860 7.460 7.460 7.460 7.750 7.750 7.750 7.750 9.500 9.500 9.500 9.500 9.500 9.500 9.500 9.500 9.500 9.440 9.440 9.440 9.500 9.500 11.000 9.500 9.500 9.500 9.500 9.500 9.500 11.250 9.500 11.000 9.440 9.440 9.438 9.440 8.440 8.531 8.783 9.000 9.000 8.779 9.000 9.000 8.530 8.530 8.780 8.530 9.000 9.000 8.781 8.781 8.781 9.000 9.000 9.000 9.000 11.250 11.250 11.250 11.250 11.250 11.250 11.250 11.250 11.250 11.000 11.000 11.000 11.250 11.250 12.750 11.250 11.250 11.250 11.250 11.250 11.250 12.750 11.250 13.188 11.250 11.250 11.250 11.250 11.250 11.250 285.72mm 275mm 11.250 11.250 11.250 11.250 11.250 12.250 285.75mm 11.250 11.250 275mm 11.250 11.250 11.250 11.250 11.250 11.250 11.250 5 10 10 5/6 5/6 10 10 10 10 5 5 5 6 5 6 5 5 10 10 6 6 6 10 10 10 10 10 10 10 10 10 8 10 10 10 10 10 10 10 10 10 8 10 10 10 10 10 10 10 0.781 0.813 0.813 .781 / .656 .781 / .656 0.844 0.844 0.844 0.844 0.780 0.781 0.781 0.780 0.781 0.656 0.781 0.781 0.844 0.810 0.781 0.781 0.650 0.812 0.796 0.840 0.840 0.843 0.840 0.843 0.812 0.937 0.937 0.812 0.937 0.846 0.812 0.812 0.812 0.960 0.810 0.810 0.920 0.937 0.937 0.937 0.812 0.812 0.812 0.812 118 102 102 116 116 117 117 117 117 103 101 101 111 119 134 120 120 119 109 119 120 112 110 130 118 118 114 118 111 91 90 90 116 123 119 116 112 112 92 92 92 92 112 111 111 106 106 106 106

85-122103-002 03-122518-002 85-122518-002 03-120586-002 13-120586-002 03-122126-002 83-122126-002 85-122126-002 95-122126-002 03-122603-002 83-122603-002 95-122603-002 03-123058-002 13-122990-002 13-120142-002 03-122027-002 13-122027-002 03-122239-002 13-122239-002 03-122290-002 13-122290-002 03-012480-002 13-120134-002 13-120747-002 03-012582-002 13-012582-002 83-012582-002 95-012582-002 03-123398-002 53-123582-002 53-123583-002 53-123584-002 03-122948-002 03-123397-002 85-123297-002 85-122948-002 03-122453-002 13-122453-002 53-123537-002 53-123564-002 53-123565-002 53-123566-002 03-123207-002 85-123207-002 95-123207-002 03-122550-002 83-122550-002 85-122550-002 95-122550-002

R R R R R R R R R N N N R N S R R O O O O P BA S R R R R R AD AD AD AD AD AD AD S S AD AD AD AD AD AD AD AE AE AE AE

Spoke Disc Disc Spoke Spoke Spoke / Disc Spoke / Disc Spoke / Disc Spoke/Disc Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke Disc Disc Spoke Spoke Spoke Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc

25

BRAKE DIAMETER CHART

OVERALL DEPTH BRAKE SURFACE WIDTH PILOT DIA. BOLT CIRCLE BOLT HOLES NO. SIZE WEIGHT PART NO. DRUM TYPE WHEEL TYPE

16.5" X 7" BRAKE DIAMETER

10.590 10.590 10.590 10.590 10.590 10.590 10.590 10.590 10.590 10.590 10.630 10.630 10.630 10.630 10.630 10.630 10.690 10.690 10.690 10.920 7.750 7.750 7.750 7.750 7.750 7.750 7.750 7.750 7.750 7.750 7.820 7.820 7.820 7.820 7.820 7.820 7.530 7.530 7.530 7.750 11.252 11.252 8.780 8.780 8.780 8.780 9.000 8.780 8.780 8.780 8.534 8.530 8.530 8.530 8.530 8.530 9.438 9.438 9.438 8.992 13.189 13.189 11.250 11.250 11.250 11.250 10.827 10.827 10.827 10.827 11.250 11.250 11.250 11.250 11.250 11.250 11.250 11.250 11.250 10.827 10 10 10 10 10 10 8 8 8 8 10 10 10 10 10 10 10 10 10 8 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.812 0.812 0.812 0.812 0.812 0.812 0.843 0.843 0.843 0.844 114 114 122 122 122 122 123 123 123 123 112 117 117 117 117 117 115 115 115 104

03-123025-002 13-123025-002 03-123365-002 83-123365-002 85-123365-002 95-123365-002 03-123409-002 83-123409-002 85-123409-002 95-123409-002 03-122978-002 03-122607-002 13-122607-002 83-122607-002 93-122607-002 95-122607-002 03-120877-002 83-120877-002 85-120877-002 85-123348-002

S S AD AD AD AD AD AD AD AD R R R R R R R R R AD

Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Spoke

16.5" X 8" BRAKE DIAMETER

10.960 11.090 8.620 8.910 8.780 8.779 285.75mm 11.250 10 10 0.937 0.937 95 100

53-123535-002 85-123520-002

AD AD

Disc Disc

16.5" X 8.625" BRAKE DIAMETER

9.940 10.250 11.040 11.040 11.250 11.250 11.760 11.870 11.870 11.980 11.980 12.150 12.150 12.150 12.270 12.330 12.330 12.330 12.330 9.060 9.219 9.150 9.150 9.110 9.110 9.580 9.100 9.100 9.130 9.130 9.380 9.380 9.380 9.330 9.480 9.480 9.480 9.480 9.438 9.500 8.779 8.780 8.779 8.779 9.000 8.531 8.783 8.780 8.780 9.000 8.530 8.780 9.438 8.780 8.780 8.780 8.780 11.000 11.250 11.250 285.75mm 11.250 11.250 10.930 11.250 285.75mm 11.250 11.250 275mm 11.250 285.75mm 11.250 11.250 11.250 11.250 11.250 5/6 10 10 10 10 10 8 10 10 10 10 8 10 10 10 10 10 10 10 .781 / .656 0.844 0.932 0.960 0.937 0.937 0.937 0.812 0.937 0.937 0.937 0.937 0.812 0.937 0.843 0.937 0.937 0.937 0.937 126 131 102 112 138 139 135 104 103 142 142 106 106 106 127 142 142 142 140

03-122284-002 03-120376-002 53-123544-002 53-123554-002 85-123570-002 95-123570-002 85-123470-002 53-123596-002 53-123597-002 03-123406-002 83-123406-002 53-123579-002 53-123579-002 53-123581-002 03-122513-002 03-123427-002 03-123428-002 83-123428-002 95-123428-002

R AU AD AD Z Z Z AD AD R R AD AD AD R R R R R

Spoke Spoke / Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc Disc

18" X 7" BRAKE DIAMETER

8.250 8.250 7.440 7.440 11.000 11.000 12.750 12.750 6 6 0.656 0.656 132 132

03-120936-002 13-120936-002

A A

Spoke Spoke

26

NOTES

27

MEDIUM-DUTY TRUCK HYDRAULIC DISC BRAKE ROTORS

A -- DISC OUTSIDE DIA.

F A

D -- BOLT CIRCLE E -- DIA. & NUMBER OF HOLES F -- PILOT DIA.

D

B -- NEW DISC THICKNESS* C -- ROTOR OVERALL DEPTH

E

B C

DISC BRAKE ROTOR NUMERICAL LISTING

A

PART NO.

B

C

D

E

BOLT HOLES DIA.

0.812 0.656 0.656 0.781 0.812 0.781 0.656 0.840 0.594 0.844 0.578 5.310 0.531 0.591 0.544

F

PILOT DIA.

7.000 5.220 5.400 9.251 9.499 5.401 9.187 8.688 6.000 6.446 6.001 4.600 4.600 6.000 8.350 GM 15579754 For ABS Use 23-123495-002 275mm Bolt Circle Use With 19.5" Rims Ford Part Number E4HZ1125D For ABS Use 23-123552-004 Gunite D6059 For ABS Use 23-123480-002 For ABS Use 23-123486-002 For ABS Use 23-123468-002

OVEROUT- NEW INCH ALL BOLT ROTOR SIDE DISC TYPE DISC THICKNESS* ROTOR CIRCLE DEPTH

2 1 1 2 2 1 2 2 1 2 1 1 1 1 2 15.000 14.930 14.750 15.380 15.380 14.750 15.000 15.380 15.380 15.380 15.000 14.250 14.250 14.750 15.380 1.440 1.350 1.350 1.540 1.540 1.350 1.430 1.540 1.540 1.540 1.435 1.440 1.440 1.350 1.540 6.800 3.820 3.810 4.763 6.220 3.810 4.496 6.070 3.400 6.030 4.440 2.980 2.980 3.810 7.820 8.750 6.750 6.750 11.250 11.250 7.250 11.250 11.250 7.250 8.750 7.250 6.000 6.000 7.250 10.830

NOTES

NO.

6 5 6 6 10 6 5 10 10 6 10 5 6 10 8

23-122527-002 23-122687-002 23-122688-002 23-122691-002 23-122693-002 23-122700-002 23-122701-002 23-122703-002 23-122729-002 23-122743-002 23-122897-002 23-123041-002 23-123046-002 23-123296-002 23-123341-002 23-123341-004 23-123433-002 23-123434-002 23-123439-002 23-123440-002 23-123443-002 23-123458-002 23-123460-002

Mounting

2 2 1 1 1 1

15.380 15.380 15.380 14.750 15.380 14.750

1.540 1.435 1.440 1.350 1.540 1.350

7.820 6.206 3.400 3.810 3.400 3.810

10.830 11.250 7.250 7.250 7.250 7.250

0.844 0.812 0.594 0.781 0.594 0.781

8 10 10 10 10 6

8.350 9.499 6.000 6.000 6.000 5.400 GM Application For ABS Use 23-123485-002 FORD F4HZ1125A For ABS Use 23-123489-002 6 Tapped Holes For ABS Ring Mounting (8.140 Bolt Circle)

1 1

15.380 14.750

1.540 1.350

3.400 3.810

7.250 7.250

0.656 0.781

10 6

6.000 5.750

For ABS Use 6 Tapped Holes For ABS Ring

23-123461-002

Mounting

2

15.380

1.540

7.274

11.250

0.937

10

9.120

5 Tapped Holes For ABS Ring

23-123468-002

Mounting

1

14.750

1.350

3.810

6.750

0.656

6

5.400

6 Tapped Holes For ABS Ring

23-123480-002

1

14.750

1.350

3.810

7.250

0.781

6

5.400

6 Tapped Holes For ABS Ring Mounting

28

* Refers to the thickness of a brand new rotor disc.

DISC BRAKE ROTOR NUMERICAL LISTING (Cont'd)

A

PART NO. ROTOR TYPE 1 OUTSIDE DISC 15.380

B

NEW INCH DISC THICK1.440

C

D

E

BOLT HOLES DIA. 0.594 NO. 10

F

PILOT DIA. NOTES

OVERALL BOLT ROTOR CIRCLE DEPTH 3.400 7.250

23-123485-002 23-123486-002 23-123487-002 23-123489-002 23-123494-002 23-123495-002 23-123497-002 23-123498-002 23-123527-002 23-123529-002 23-123532-002 23-123550-004 23-123552-004 23-123557-002 23-123572-004 23-123573-004

6.000

5 Tapped Holes For ABS Ring Mounting (M8x1.25-6H 6.8" B.C.)

1

14.750

1.350

3.810

6.750

0.656

5

5.400

5 Tapped Holes For ABS Ring Mounting (Metric)

1

14.750

1.350

3.810

6.750

0.656

5

5.400

5 Tapped Holes For ABS Ring Mounting (1/4"-20 5.90 B.C.)

1

15.380

1.540

3.400

7.250

0.594

10

6.000

5 Tapped Holes For ABS Ring Mounting GMC Application

1 1

14.750 14.750

1.350 1.350

3.810 3.810

7.250 7.250

0.781 0.594

6 10

5.760 6.000

New Holland 86514074 5 Tapped Holes For ABS Ring Mounting

1 1

14.750 15.380

1.350 1.540

3.810 3.410 7.250 0.656 10

4.501 5.964 5 Tapped Holes For ABS Ring Mounting

1 1 1 1

15.630 14.750 15.169 15.000

1.540 1.350 1.440 1.440

3.630 3.980 2.895 3.210

7.250 7.250 6.750 7.250

0.656 0.656 0.656 0.594

10 5 5 10

5.964 6.001 5.400 6.001

Ford YC3Z1125AA Casting Number23-122687-096 GM Applications ITE 3531662C2 / ABS Exciter Teeth In Casting (100)

1

15.000

1.440

4.440

7.250

0.594

10

6.001

ITE 3531663C2 / ABS Exciter Teeth In Casting (100)

1 1 1

15.375 15.000 15.000

1.530 1.440 1.440

3.400 3.500 3.500

7.250 6.750 6.750

0.594 0.781 0.781

10 6 5

6.001 5.401 5.400

ABS Exciter Teeth In Casting (100) ABS Exciter Teeth In Casting (100) ITE 3531661C2 / ABS Exciter Teeth In Casting (100)

29

MEDIUM-DUTY TRUCK HYDRAULIC DISC BRAKE ROTORS

MAJOR DIAMETER TYPE 1 -- "HAT" SHAPE

MAJOR DIAMETER TYPE 2 -- "U" SHAPE

DISC BRAKE ROTOR IDENTIFICATION CHART

SPOKE WHEEL -- (Primary Application)

MAJOR DIA. 5 Spoke 5 Spoke 5 Spoke 6 Spoke 14.25" 15.00" 15.00" 15.38" ROTOR TYPE 1 2 2 2 NOTES -- -- -- -- PART NO.

23-123041-002 23-122701-002 23-122920-002 23-122691-002

DISC WHEEL - (Primary Application)

MAJOR DIA. 6 Stud 6 Stud 6 Stud 6 Stud 6 Stud 5 Stud 5 Stud 6 Stud 10Stud 10 Stud 10 Stud 6 Stud 10 Stud 6 Stud 10 Stud 10 Stud 6 Stud 8 Stud 8 Stud 10 Stud 10 Stud 10 Stud 14.750" 14.750" 14.750" 14.750" 14.750" 14.750" 14.750" 14.750" 14.750" 14.750" 14.750" 15.000" 15.000" 15.000" 15.375" 15.380" 15.380" 15.380" 15.380" 15.380" 15.380" 15.380" ROTOR TYPE 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 2 2 2 2 1 1 1 For ABS Use 23-123485-002 5 Tapped Holes For ABS Ring Mounting (8X1.25-6Hmm; 6.8" Bolt Circle) 5 Tapped Holes For ABS Ring Mounting GMC Application Ford E4HZ1125D 275mm Bolt Circle - Use With 19.5" Rims For ABS Use 23-123552-004 ABS Exciter Teeth In Casting (100 Tooth) ABS Exciter Teeth In Casting (100 Tooth) Casting Number 23-123529-002 For ABS Use 23-123468-002 6 Tapped Holes For ABS Ring Mounting (8.140 Bolt Circle) 6 Tapped Holes For ABS Ring Mounting 6 Tapped Holes For ABS Ring Mounting 6 Tapped Holes For ABS Ring Mounting 5 Tapped Holes For ABS Ring Mounting (Metric) 5 Tapped Holes For ABS Ring Mounting (1/4"-20; 5.90 Bolt Circle) New Holland 86514074 5 Tapped Holes For ABS Ring Mounting NOTES PART NO.

23-122688-002 23-123443-002 23-123460-002 23-123468-002 23-123480-002 23-123468-002 23-123487-002 23-123494-002 23-123495-002 23-123497-002 23-123529-002 23-122527-002 23-122897-002 23-123572-004 23-123557-002 23-123703-002 23-122743-002 23-123341-002 23-123341-004 23-123434-002 23-123485-002

30

DISC BRAKE ROTOR IDENTIFICATION CHART

SPOKE OR DISC WHEEL -- (Primary Application)

MAJOR DIA. 6 Stud 6 Stud 8 Stud 10 Stud 5 Stud 10 Stud 10 Stud 5 Stud 6 Stud 10 Stud 10 Stud 10 Stud 10 Stud 10 Stud 10 Stud 10 Stud 6 Stud 14.250" 14.750" 14.750" 14.750" 14.930" 15.000" 15.000" 15.000" 15.169" 15.380" 15.380" 15.380" 15.380" 15.380" 15.380" 15.380" 15.630" ROTOR TYPE 1 1 1 1 1 1 1 1 1 2 1 2 1 1 2 1 1 5 Tapped Holes For ABS Ring Mounting 5 Tapped Holes For ABS Ring Mounting Ford YC3Z1125AA GM Application For ABS Use 23-123489-002 GM 15579754 For ABS Use 23-123480-002 For ABS Use 23-123495-002 Ford F4HZ1125A For ABS Use 23-123486-002 ITE 3531662C2 / ABS Exciter Teeth In Casting (100 Tooth) ITE 3531663C2 / ABS Exciter Teeth In Casting (100 Tooth) ITE 3531661C2 / ABS Exciter Teeth In Casting (100 Tooth) GM Application Gunite D6059 NOTES PART NO.

23-123046-002 23-123700-002 23-123296-002 23-123439-002 23-122687-002 23-123550-004 23-123552-004 23-123573-004 23-123532-002 23-122693-002 23-122729-002 23-123433-002 23-123440-002 23-123458-002 23-123461-002 23-123498-002 23-123527-002

31

TRAILER HUBS

DAYTON NO. 04-09179-XXX DESCRIPTION

Trailer Hub Inboard Drum

TYPE

10 hole Serrated Studs

INNER BEARING CUP

HM518410

CONE

HM518445

BOLT CIRCLE

11.25"

OUTER BEARING CUP

HM518410 DRAWING REFERENCE A B C D E F G

CONE

HM518445

ITEM Overall Length Outer Hub Cap Face To Inner Brg. Cup Seat Distance Between Cups Bolt Circle Diameter Wheel Stud Qty. Pilot Diameter Drum Mount Hub Cap Mount

DIMENSION 9.06" 6.94" 4.5" 11.25" 10" 9.5 6.25"-8 TPI

FOR AXLE MODELS:

DANA SPICER EATON: 225P, 230P, P-22 FRUEHAUF: PRO-PAR MERITOR: TP

HENDRICKSON: HP INGERSOLL: A24H, A24S, F24

STUDS USED WITH HUB IN ASSEMBLIES

STUD NO. 09-001400 09-001828 09-001326 09-001327 THEAD TYPE SIZE Serr. 3/4"-16 R Serr. 3/4"-16 L Serr. 3/4"-16 R Serr. 3/4"-16 L STYLE Stud Piloted Stud Piloted Stud Piloted Stud Piloted WHEEL TYPE Steel Wheel Steel Wheel Steel Wheel Steel Wheel USE WITH DRUM TYPE X-30 X-30 Cast Cast

DRUMS USED WITH HUB IN ASSEMBLIES

DRUM NO. 03-122126-002 ABS RING NO. N/A DRUM TYPE Cast Non-Balanced BRAKE SIZE 16.5" x 7" OVERALL DEPTH 8.75" PILOT 9.50"

DESCRIPTION

HUB PART NUMBER 04-09179-029

HAND

CUPS

WHEEL TYPE N/A

DRUM TYPE N/A

STUDS

INNER / OUTER NUTS N/A

ABS

--

X

No

No

STUD PILOTED -- Hub Assemblies Without Drum

04-09179-038 04-09179-039

RH LH X X Steel or Aluminum Steel or Aluminum Cast Cast Yes Yes No No No No

STUD PILOTED -- Hub and Drum Assemblies

14-09179-310 14-09179-311

RH LH X X Steel Steel Cast Cast Yes Yes No No No No

Note: Other combinations are available. For information please call the specifications department 1-888-725-9355. Not all of the numbers listed above are stocking items, some may have lead times involved.

32

TRAILER HUBS

DAYTON NO. 04-14131-XXX DESCRIPTION

Trailer Hub Outboard Drum

TYPE

10 hole Serrated Studs

INNER BEARING CUP

HM518410

CONE

HM518445

BOLT CIRCLE

11.250"

OUTER BEARING CUP

HM518410 DRAWING REFERENCE A B C D E F G

CONE

HM518445

ITEM Overall Length Outer Hub Cap Face To Inner Brg. Cup Seat Distance Between Cups Bolt Circle Diameter Wheel Stud Qty. Pilot Diameter Hub Cap Mount

DIMENSION 9.06" 6.94" 4.5" 11.25" 10" 9.47" 6.25"-8 TPI

FOR AXLE MODELS:

DANA SPICER EATON: 225P, 230P, P-22 FRUEHAUF: PRO-PAR MERITOR: TP

HENDRICKSON: HP INGERSOLL: A24H, A24S, F24

STUDS USED WITH HUB IN ASSEMBLIES

STUD NO. 09-861901 09-861902 THEAD TYPE SIZE Serr. 3/4"-16 R Serr. 3/4"-16 L STYLE Stud Piloted Stud Piloted WHEEL TYPE Steel Wheel Steel Wheel USE WITH DRUM TYPE Cast Cast

DRUMS USED WITH HUB IN ASSEMBLIES

DRUM NO. 03-120877-002 03-122513-002 ABS RING NO. N/A DRUM TYPE Cast Non-Balanced Cast Non-Balanced BRAKE SIZE 16.5" x 7" 16.5" x 8.625" OVERALL DEPTH 10.690" 12.270" PILOT 9.438" 9.438"

DESCRIPTION

HUB PART NUMBER 04-14131-001

HAND

CUPS X

WHEEL TYPE N/A

DRUM TYPE N/A

STUDS No

INNER / OUTER NUTS N/A

ABS No

STUD PILOTED -- Hub Assemblies Without Drum

04-14131-006 04-14131-007

RH LH X X Steel Steel Cast Cast Yes Yes No No No No

STUD PILOTED -- Hub and Drum Assemblies With 16.5" X 7" Drum (03-120877-002)

14-14131-064 14-14131-065

RH LH X X Steel Steel Cast Cast Yes Yes No No No No

STUD PILOTED -- Hub and Drum Assemblies With 16.5" X 8.62" Drum (03-122513-002)

14-14131-064 14-14131-065

RH LH X X Steel Steel Cast Cast Yes Yes No No No No

Note: Other combinations are available. For information please call the specifications department 1-888-725-9355. Not all of the numbers listed above are stocking items, some may have lead times involved.

33

TRAILER HUBS

DAYTON NO. 04-14802-XXX DESCRIPTION

Trailer Hub Outboard Drum

TYPE

10 hole Serrated Studs

INNER BEARING CUP

HM218210

CONE

HM218248

BOLT CIRCLE

11.250"

OUTER BEARING CUP

HM212011 DRAWING REFERENCE A B C D E F G

CONE

HM212049

ITEM Overall Length Outer Hub Cap Face To Inner Brg. Cup Seat Distance Between Cups Bolt Circle Diameter Wheel Stud Qty. Pilot Diameter Hub Cap Hole Pattern

DIMENSION 6.93" 4.74" 3.34" 11.25" 10" 8.53" 6, 5/16"-18; 5.5" B.C.

FOR AXLE MODELS:

DANA SPICER EATON: D-22, K-22, J, JE, JH, 23L, 23R DEXTER: D200K, D2225K HENDRICKSON: HN INGERSOLL: A22H, A22S, A22T, DC22H, F22

K-B: KBW-KBS MERITOR: RN, RQ, TKN, TN, TQ, TQC, TQD STD. FORGE: A-22H, A-22S, A-22T WESTPORT: F3W-1600, F3W-1800/2000, F3W-1800D/2000D

STUDS USED WITH HUB IN ASSEMBLIES

STUD NO. 09-853601 09-853602 09-861901 09-861902 THEAD TYPE SIZE Serr. 3/4"-16 R Serr. 3/4"-16 L Serr. 3/4"-16 R Serr. 3/4"-16 L STYLE Stud Piloted Stud Piloted Stud Piloted Stud Piloted WHEEL TYPE Steel Wheel Steel Wheel Steel Wheel Steel Wheel USE WITH DRUM TYPE Cast Cast Cast Cast

DRUMS USED WITH HUB IN ASSEMBLIES

DRUM NO. 03-122607-002 ABS RING NO. N/A DRUM TYPE Cast Non-Balanced DESCRIPTION -- HAND N/A CUPS X WHEEL TYPE N/A DRUM TYPE N/A STUDS No INNER / OUTER NUTS N/A ABS No BRAKE SIZE 16.5" x 7" OVERALL DEPTH 10.63" PILOT 8.530"

HUB PART NUMBER 04-14802-010

STUD PILOTED -- Hub Assemblies Without Drum

04-14802-001 04-14802-002 04-14802-003 04-14802-004

RH LH RH LH X X X X Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum X-30 X-30 Cast Cast Yes Yes Yes Yes No No No No No No No No

STUD PILOTED -- Hub and Drum Assemblies With 16" X 7" Drum (03-122607-002)

14-14802-100 14-14802-102 14-14802-101 14-14802-103 14-14802-108 14-14802-109

RH RH LH LH RH LH X X X X X X Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Cast Cast Cast Cast Cast Cast Yes Yes Yes Yes Yes Yes Yes 10 cap No Yes 10 cap No Yes 10 cap Yes 10 cap No No No No No No

34

Note: Other combinations are available. For information please call the specifications department 1-888-725-9355. Not all of the numbers listed above are stocking items, some may have lead times involved.

TRAILER HUBS

DAYTON NO. 04-15479-XXX DESCRIPTION

Trailer Hub Outboard Drum

TYPE

10 hole Serrated Studs

INNER BEARING CUP

HM218210

CONE

HM218248

BOLT CIRCLE

13.189"

OUTER BEARING CUP

HM212011 DRAWING REFERENCE A B C D E F G

CONE

HM212049

ITEM Overall Length Outer Hub Cap Face To Inner Brg. Cup Seat Distance Between Cups Bolt Circle Diameter Wheel Stud Qty. Pilot Diameter Hub Cap Hole Pattern

DIMENSION 6.93" 4.74" 3.34" 13.189" 10" 11.252" 6, 5/16"-18; 5.5" B.C.

FOR AXLE MODELS: DANA SPICER EATON: D-22, K-22, J, JE, JH, 23L, 23R HENDRICKSON: HN MERITOR: RN, RQ, TKN, TN, TQ, TQC, TQD WESTPORT: F3W-1600, F3W-1800/2000, F3W-1800D/2000D

DEXTER: D200K, D2225K INGERSOLL: A22H, A22S, A22T, DC22H, F22 K-B: KBW-KBS STD. FORGE: A-22H, A-22S, A-22T

STUDS USED WITH HUB IN ASSEMBLIES

STUD NO. 09-001989 THEAD TYPE SIZE Serr. M22 x 1.5 STYLE Hub Piloted WHEEL TYPE Steel Wheel USE WITH DRUM TYPE Cast

DRUMS USED WITH HUB IN ASSEMBLIES

DRUM NO. 03-123025-002 ABS RING NO. N/A DRUM TYPE Cast Non-Balanced BRAKE SIZE 16.5" x 7" OVERALL DEPTH 10.590" 11.252 " PILOT

DESCRIPTION --

HUB PART NUMBER

HAND

CUPS

WHEEL TYPE

DRUM TYPE

STUDS

INNER / OUTER NUTS

ABS

HUB PILOTED -- Hub And Drum Assemblies With 16.5" X 7" Drum (03-123025-002)

14-15479-1000

X Steel Cast Yes 10 Flg Yes

Note: Other combinations are available. For information please call the specifications department 1-888-725-9355. Not all of the numbers listed above are stocking items, some may have lead times involved.

35

TRAILER HUBS

DAYTON NO. 04-15501-XXX DESCRIPTION

Trailer Hub Outboard Drum

TYPE

10 hole Serrated Studs

INNER BEARING CUP

HM 218210

CONE

HM218245

BOLT CIRCLE

11.250"

OUTER BEARING CUP

HM 212011

CONE

HM 212049

DRAWING REFERENCE A B C D E F G

ITEM Over All Length Outer Hub Cap Face To Inner Brg. Cup Seat Distance Between Cups Bolt Circle Diameter Wheel Stud Qty. Pilot Diameter Hub Cap Hole Pattern

DIMENSION 6.93" 4.74" 3.34" 11.25" 10" 8.75" 6, 5/16"-18; 5.5" B.C.

FOR AXLE MODELS:

DANA SPICER EATON: D-22, K-22, J, JE, JH, 23L, 23R DEXTER: D200K, D2225K HENDRICKSON: HN K-B: KBW-KBS INGERSOLL: A22H, A22S, A22T, DC22H, F22, A-22S MERITOR: RN, RQ, TKN, TN, TQ, TQC, TQD STD. FORGE: A-22H, A-22S, A-22T WESTPORT: F3W-1600, F3W-1800/2000, F3W-1800D/2000D

STUDS USED WITH HUB IN ASSEMBLIES

STUD NO. 09-001989 09-002002 09-002003 09-002049 09-002050 09-001910 09-001911 THEAD TYPE SIZE Serr. M22 x 1.5 Serr. M22 x 1.5 Serr. M22 x 1.5 Serr. 3/4"-16 R Serr. 3/4"-16 L Serr. 3/4"-16 R Serr. 3/4"-16 L STYLE Hub Piloted Hub Piloted Hub Piloted Stud Piloted Stud Piloted Stud Piloted Stud Piloted WHEEL TYPE Steel Wheel Steel Wheel Aluminum Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel USE WITH DRUM TYPE Cast X-30 Cast X-30 X-30 Cast Cast

DRUMS USED WITH HUB IN ASSEMBLIES

DRUM NO. 03-123365-002 83-123365-002 85-123365-002 03-123428-002 85-123428-002 03-123207-002 83-123207-002 85-123207-002 03-123538-002 53-123537-002 ABS RING NO. 09-001867 DRUM TYPE Cast Non-Balanced Cast X10 Cast MTB Cast Non-Balanced Cast MTB Cast Non-Balanced Cast X10 Cast MTB Cast Non-Balanced X-30 BRAKE SIZE 16.5" x 7" 16.5" x 7" 16.5" x 7" 16.5" x 8.625" 16.5" x 8.625" 16.5" x 7" 16.5" x 7" 16.5" x 7" -- 16.5" x 7" OVERALL DEPTH 10.590" 10.590" 10.590" 12.330" 12.330" 10.540" 10.540" 10.540" -- 10.380" PILOT 8.780" 8.780" 8.780" 8.780" 8.780" 8.781" 8.781" 8.781" -- 8.780"

DESCRIPTION 100 Tooth

36

TRAILER HUBS

HUB PART NUMBER 04-15501-013 04-15501-014

HAND CUPS WHEEL TYPE N/A N/A DRUM TYPE N/A N/A STUDS INNER / OUTER NUTS N/A N/A ABS X X No No No Yes

STUD PILOTED -- Hub and Stud Assemblies Without Drum

04-15501-035 04-15501-033 04-15501-036 04-15501-034 04-15501-031 04-15501-029 04-15501-032 04-15501-030

RH RH LH LH LH LH RH LH X X X X X X X X Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Cast Cast Cast Cast X-30 X-30 X-30 X-30 Yes Yes Yes Yes Yes Yes Yes Yes No No No No No No No No No Yes No Yes No Yes No Yes

HUB PILOTED ­ Hub and Stud Assemblies Without Drum

04-15501-005 04-15501-008 04-15501-006 04-15501-009 04-15501-006 04-15501-009

X X X X X X Steel Steel Aluminum Aluminum Aluminum Aluminum Cast Cast Cast Cast X-30 X-30 Yes Yes Yes Yes Yes Yes No No No No No No No Yes No Yes No Yes

STUD PILOTED -- Hub and Drum Assemblies With 16.5" X 7" Drum (03-123207-002 or 53-123537-002)

14-15501-377 14-15501-505 14-15501-378 14-15501-506 14-15501-668X30 14-15501-666X30 14-15501-669X30 14-15501-667X30

RH RH LH LH RH RH LH LH X X X X X X X X Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Cast Cast Cast Cast X-30 Cast Cast Cast Yes Yes Yes Yes Yes Yes Yes Yes No No No No No No No No No Yes No Yes No Yes No Yes

HUB PILOTED -- Hub and Drum Assemblies With 16.5" X 7" Drum (03-123207-002 or 53-123537-002)

14-15501-352 14-15501-516 14-15501-353 14-15501-517 14-15501-652X30 14-15501-656X30 14-15501-653X30 14-15501-657X30

X X X X X X X X Steel Steel Aluminum Aluminum Steel Steel Aluminum Aluminum Cast Cast Cast Cast X-30 X-30 X-30 X-30 Yes Yes Yes Yes Yes Yes Yes Yes No No No No No No No No No Yes No Yes No Yes No Yes

Note: Other combinations are available. For information please call the specifications department 1-888-725-9355. Not all of the numbers listed above are stocking items, some may have lead times involved.

37

TRAILER HUBS

DAYTON NO. 04-15502-XXX DESCRIPTION

Trailer Hub Outboard Drum

TYPE

10 hole Serrated Studs

INNER BEARING

CUP HM 518410

CONE

HM 518445

BOLT CIRCLE

11.250"

OUTER BEARING CUP

HM 518410

CONE

HM 518445

DRAWING REFERENCE A B C D E F G

ITEM Overall Length Outer Hub Cap Face To Inner Brg. Cup Seat Distance Between Cups Bolt Circle Diameter Wheel Stud Qty. Pilot Diameter Hub Cap Mount

DIMENSION 9.06" 6.94" 4.5" 11.25" 10" 8.75" 6.25"-8 TPI

FOR AXLE MODELS:

DANA SPICER EATON: 225P, 230P, P-22 MERITOR: TP INGERSOLL: A24H, A24S, F24

FRUEHAUF: PRO-PAR HENDRICKSON: HP

STUDS USED WITH HUB IN ASSEMBLIES

STUD NO. 09-001989 09-002002 09-002003 09-002049 09-002050 09-001910 09-001911 THEAD TYPE SIZE Serr. M22 x 1.5 Serr. M22 x 1.5 Serr. M22 x 1.5 Serr. 3/4"-16 R Serr. 3/4"-16 L Serr. 3/4"-16 R Serr. 3/4"-16 L STYLE Hub Piloted Hub Piloted Hub Piloted Stud Piloted Stud Piloted Stud Piloted Stud Piloted WHEEL TYPE Steel Wheel Steel Wheel Aluminum Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel USE WITH DRUM TYPE Cast X-30 Cast X-30 X-30 Cast Cast

DRUMS USED WITH HUB IN ASSEMBLIES

DRUM NO. 03-123365-002 83-123365-002 85-123365-002 03-123428-002 85-123428-002 03-123207-002 83-123207-002 85-123207-002 53-123537-002 ABS RING NO. 09-001867 DRUM TYPE Cast Non-Balanced Cast X10 Cast MTB Cast Non-Balanced Cast MTB Cast Non-Balanced Cast X10 Cast MTB X-30 BRAKE SIZE 16.5" x 7" 16.5" x 7" 16.5" x 7" 16.5" x 8.625" 16.5" x 8.625" 16.5" x 7" 16.5" x 7" 16.5" x 7" 16.5" x 7" OVERALL DEPTH 10.590" 10.590" 10.590" 12.330" 12.330" 10.540" 10.540" 10.540" 10.380" PILOT 8.780" 8.780" 8.780" 8.780" 8.780" 8.781" 8.781" 8.781" 8.780"

DESCRIPTION 100 Tooth

38

TRAILER HUBS

HUB PART NUMBER 04-15502-021 04-15502-022

HAND CUPS X X WHEEL TYPE N/A N/A DRUM TYPE N/A N/A STUDS No No INNER / OUTER NUTS N/A N/A ABS No Yes

STUD PILOTED -- Hub and Stud Assemblies Without Drums

04-15502-029 04-15502-031 04-15502-030 04-15502-032

RH RH LH LH X X X X Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Cast Cast Cast Cast Yes Yes Yes Yes No No No No No Yes No Yes

HUB PILOTED ­ Hub and Stud Assemblies Without Drums

04-15502-005 04-15502-004 04-15502-006 04-15502-007

X X X X Steel Steel Aluminum Aluminum Cast Cast Cast or X-30 Cast or X-30 Yes Yes Yes Yes No No No No No Yes No Yes

STUD PILOTED -- Hub and Drum Assemblies With 16.5" X 7" Drum (03-123207-002 or 53-123537-002)

14-15502-509 14-15502-511 14-15502-510 14-15502-512 14-15502-625X30 14-15502-626X30

RH RH LH LH RH LH X X X X X X Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Aluminum Aluminum Cast Cast Cast Cast Cast Cast Yes Yes Yes Yes Yes Yes No No No No No No No Yes No Yes Yes Yes

STUD PILOTED -- Hub and Drum Assemblies With 16.5" X 8.62" Drum (03-123406-002)

14-15502-304 14-15502-305

RH LH X X Steel or Aluminum Steel or Aluminum Cast Cast Yes Yes No No Yes Yes

HUB PILOTED -- Hub and Drum Assemblies With 16.5" X 7" Drum (03-123207-002 or 53-123537-002)

14-15502-352 14-15502-503 14-15502-502 14-15502-504 14-15502-600X30 14-15502-602X30 14-15502-601X30 14-15502-603X30

X X X X X X X X Steel Steel Aluminum Aluminum Steel Steel Aluminum Aluminum Cast Cast Cast Cast X-30 X-30 X-30 X-30 Yes Yes Yes Yes Yes Yes Yes Yes No No No No No No No No No Yes No Yes No Yes No Yes

HUB PILOTED -- Hub and Drum Assemblies With 16.5" X 7" Drum (03-123365-002)

14-15502-456 14-15502-458 14-15502-457 14-15502-459

X X X X Steel Steel Aluminum Aluminum Cast Cast Cast Cast Yes Yes Yes Yes No No No No No Yes No Yes

HUB PILOTED-- Hub and Drum Assemblies With 16.5" X 8.62" Drum (03-123406-002)

14-15502-191 14-15502-193 14-15502-192 14-15502-194

X X X X Steel Steel Aluminum Aluminum Cast Cast Cast Cast Yes Yes Yes Yes No No No No No Yes No Yes

HUB PILOTED -- Hub and Drum Assemblies With 16.5" X 8.62" Drum (03-123520-002)

14-15502-552 14-15502-553 14-15502-554 14-15502-555

X X X X Steel Steel Aluminum Aluminum Cast Cast Cast Cast Yes Yes Yes Yes No No No No No Yes No Yes

Note: Other combinations are available. For information please call the specifications department 1-888-725-9355. Not all of the numbers listed above are stocking items, some may have lead times involved.

39

TRAILER HUBS

DAYTON NO. 04-15527-XXX DESCRIPTION

Trailer Hub Inboard Drum

TYPE

10 hole Serrated Studs

INNER BEARING

CUP 742

CONE

749

BOLT CIRCLE

11.250"

OUTER BEARING CUP

632

CONE

643

DRAWING REFERENCE A B C D E F G

ITEM Overall Length Outer Hub Cap Face To Inner Brg. Cup Seat Distance Between Cups Bolt Circle Diameter Wheel Stud Qty. Pilot Diameter Hub Cap Hole Pattern

DIMENSION 8.62" 6.06" 4.5" 11.25" 10" 8.75" 6, 5/16"-18; 6" B.C.

FOR AXLE MODELS:

DANA: K-25 EATON: H, HD STD. FORGE: A21T

STUDS USED WITH HUB IN ASSEMBLIES

STUD NO. 09-001912 09-001913 THEAD TYPE SIZE Shldr 3/4"-16 R/H Shldr 3/4"-16 L/H STYLE Stud Piloted Stud Piloted WHEEL TYPE Steel Wheel Steel Wheel USE WITH DRUM TYPE Cast Cast

DRUMS USED WITH HUB IN ASSEMBLIES

DRUM NO. 03-123398-002 DRUM TYPE Cast Non-Balanced BRAKE SIZE 16.5" x 7" OVERALL DEPTH 9.500" PILOT 8.440"

ABS RING NO. --

DESCRIPTION --

HUB PART NUMBER

HAND

CUPS

WHEEL TYPE

DRUM TYPE

STUDS

INNER / OUTER NUTS

ABS

STUD PILOTED -- Hub and Drum Assemblies With 16.5" X 7" Drum (03-123398-002)

14-15527-050 14-15527-051 RH LH X X Steel Steel Cast Cast Yes Yes Yes 10 cap Yes 10 cap No No

Note: Other combinations are available. For information please call the specifications department 1-888-725-9355. Not all of the numbers listed above are stocking items, some may have lead times involved.

40

TRAILER HUBS

DAYTON NO. 04-15537-XXX INNER BEARING

CUP HM 518410

DESCRIPTION

Trailer Hub Outboard Drum

TYPE

10 hole Serrated Studs

CONE

HM 518445

BOLT CIRCLE

10.827"

OUTER BEARING CUP

HM 518410 DRAWING REFERENCE A B C D E F G

CONE

HM 518445

ITEM Overall Length Outer Hub Cap Face To Inner Brg. Cup Seat Distance Between Cups Bolt Circle Diameter Wheel Stud Qty. Pilot Diameter Hub Cap Mount

DIMENSION 9.06" 6.94" 4.5" 10.827" 8" 8.75" 6.25"-8 TPI

FOR AXLE MODELS:

DANA SPICER EATON: 225P, 230P, P-22 FRUEHAUF: PRO-PAR

MERITOR: TP HENDRICKSON: HP INGERSOLL: A24H, A24S, F24

STUDS USED WITH HUB IN ASSEMBLIES

STUD NO. 09-001989 09-002003 THEAD TYPE SIZE Serr. M22 x 1.5 Serr. M22 x 1.5 STYLE Hub Piloted Hub Piloted WHEEL TYPE Steel Wheel Aluminum Wheel USE WITH DRUM TYPE Cast Cast

DRUMS USED WITH HUB IN ASSEMBLIES

DRUM NO. 03-123409-002 DRUM TYPE Cast Non-Balanced DESCRIPTION 100 Tooth HAND CUPS X X WHEEL TYPE N/A N/A DRUM TYPE N/A N/A STUDS No No INNER / OUTER NUTS N/A N/A ABS No Yes BRAKE SIZE 16.5" x 7" OVERALL DEPTH 9.500" PILOT 9.00"

ABS RING NO. 09-001867

HUB PART NUMBER 04-15537-016 04-15537-017

HUB PILOTED -- Hub and Stud Assemblies

04-15537-012 04-15537-011 04-15537-014 04-15537-013

X X X X Steel Steel Aluminum Aluminum Cast Cast Cast Cast Yes Yes Yes Yes No No No No No Yes No Yes

HUB PILOTED -- Hub and Drum Assemblies With 16.5" X 7" Drum (03-123409-002 or 53-123566-002)

14-15537-080 14-15537-081 14-15537-078 14-15537-079 14-15537-300X30 14-15537-302X30 14-15537-301X30 14-15537-303X30

X X X X X X X X Steel Steel Aluminum Aluminum Steel Steel Aluminum Aluminum Cast Cast Cast Cast X-30 X-30 X-30 X-30 Yes Yes Yes Yes Yes Yes Yes Yes No No No No No No No No No Yes No Yes No Yes No Yes

Note:Other Combinations are avaiable. For information please call the specifications department Not All of the numbers listed above are stocking items, some may have lead times involved

41

TRAILER HUBS

DAYTON NO. 04-15541-XXX INNER BEARING CUP

HM218210

DESCRIPTION

Trailer Nub Outboard Drum

TYPE

10 Hole Serrated Studs

CONE

HM218248

BOLT CIRCLE

10.827" 275mm

OUTER BEARING CUP HM212011

DRAWING REFERENCE A B C D E F G

CONE HM212049

ITEM

DIMENSION

Overall Length 6.93" Outer Hub Cap Face To Inner Brg. Cup Seat 4.74" Distance Between Cups 3.34" Bolt Circle Diameter 10.827" Wheel Stud Qty. 8" Pilot Diameter 9.00" Hub Cap Hole Pattern 6, 5/16"-18; 5.5" B.C.

FOR AXLE MODELS:

DANA SPICER EATON: D-22, K-22, J, JE, JH, 23L, 23R DEXTER: D200K, D2225K HENDRICKSON: HN INGERSOLL: A22H, A22S, A22T, DC22H, F22 K-B: KBW-KBS MERITOR: RN, RQ, TKN, TN, TQ, TQC, TQD STD. FORGE: A-22H, A-22S, A-22T WESTPORT: F3W-1600, F3W-1800/2000, F3W-1800D/2000D

STUDS USED WITH HUB IN ASSEMBLIES

STUD NO. 09-001989 09-002003 09-001727 THEAD TYPE SIZE Serr. M22 x 1.5 Serr. M22 x 1.5 Serr. M22 x 1.5 STYLE Hub Piloted Hub Piloted Hub Piloted WHEEL TYPE Steel Wheel Aluminum Wheel Aluminum Wheel USE WITH DRUM TYPE Cast Cast X-30

DRUMS USED WITH HUB IN ASSEMBLIES

DRUM NO. 03-123409-002 53-123566-002 ABS RING NO. -- DRUM TYPE Cast Non-Balanced X-30 BRAKE SIZE 16.5" x 7" 16.5" x 7" OVERALL DEPTH 10.590" 10.380" PILOT 9.00" 9.00"

DESCRIPTION --

42

TRAILER HUBS

HUB PART NUMBER 04-15541-009 04-15541-010

HAND CUPS WHEEL TYPE N/A N/A DRUM TYPE N/A N/A STUDS INNER / OUTER NUTS N/A N/A ABS X X No No No Yes

HUB PILOTED -- Hub and Stud Assemblies Without Drum

04-15541-005 04-15541-004 04-15541-007 04-15541-006

X X X X Steel Steel Steel or Aluminum Steel or Aluminum Cast Cast Cast Cast Yes Yes Yes Yes No No No No No Yes No Yes

HUB PILOTED -- Hub and Drum Assemblies With 16.5" x 7" Drum (03-123207-002 or 53-123537-002

14-15541-067 14-15541-068 14-15541-058 14-15541-066 14-15541-352X30 14-15541-365X30 14-15541-353X30 14-15541-357X30

X X X X X X X X Steel Steel Aluminum Aluminum Steel Steel Aluminum Aluminum Cast Cast Cast Cast X-30 X-30 X-30 X-30 Yes Yes Yes Yes Yes Yes Yes Yes No No 8 Flg No No No No No No Yes No Yes No Yes No Yes

Note: Other combinations are available. For information please call the specifications department 1-888-725-9355. Not all of the numbers listed above are stocking items, some may have lead times involved.

43

TRAILER HUBS

DAYTON NO. 04-15571-XXX DESCRIPTION Trailer Hub

Outboard Drum

TYPE 10 hole

Serrated Studs

INNER BEARING CUP

HM218210

CONE

HM218248

BOLT CIRCLE

11.25"

OUTER BEARING CUP HM212011

CONE HM212049

DRAWING REFERENCE A B C D E F G

ITEM Overall Length Outer Hub Cap Face To Inner Brg. Cup Seat Distance Between Cups Bolt Circle Diameter Wheel Stud Qty Pilot Diameter Hub Cap Hole Pattern

DIMENSION 6.93 4.74" 3.34" 11.25" 10" 8.78" 6, 5/16"-18; 5.5" B.C.

FOR AXLE MODELS:

DANA SPICER EATON: D-22, K-22, J, JE, JH, 23L, 23R DEXTER: D200K, D2225K HENDRICKSON: HN INGERSOLL: A22H, A22S, A22T, DC22H, F22 K-B: KBW-KBS MERITOR: RN, RQ, TKN, TN, TQ, TQC, TQD STD. FORGE: A-22H, A-22S, A-22T WESTPORT: F3W-1600, F3W-1800/2000, F3W-1800D/2000D

STUDS USED WITH HUB IN ASSEMBLIES

STUD NO. 09-001989 09-002003 09-001910 09-001911 THEAD TYPE SIZE Serr. M22 x 1.5 Serr. M22 x 1.5 Serr. 3/4"-16 R Serr. 3/4"-16 L STYLE Hub Piloted Hub Piloted Stud Piloted Stud Piloted WHEEL TYPE Steel Wheel Aluminum Wheel Steel Wheel Steel Wheel USE WITH DRUM TYPE Cast Cast Cast Cast

DRUMS USED WITH HUB IN ASSEMBLIES

DRUM NO. 03-123365-002 83-123207-002 85-123365-002 03-123428-002 85-123428-002 03-123207-002 85-123207-002 ABS RING NO. 09-001867 DRUM TYPE Cast Non-Balanced Cast X10 Cast MTB Cast Non-Balanced Cast MTB Cast Non-Balanced Cast MTB BRAKE SIZE 16.5" x 7" 16.5" x 7" 16.5" x 7" 16.5" x 8.625" 16.5" x 8.625" 16.5" x 7" 16.5" x 7" OVERALL DEPTH 10.590" 10.540" 10.590" 12.330" 12.330" 10.540" 10.540" PILOT 8.780" 8.780" 8.780" 8.780" 8.780" 8.780" 8.780"

DESCRIPTION 100 Tooth

44

TRAILER HUBS

HUB PART NUMBER 04-15571-004

HAND CUPS WHEEL TYPE N/A DRUM TYPE N/A STUDS INNER / OUTER NUTS N/A ABS X No Yes

STUD PILOTED -- Hub and Stud Assemblies Without Drums

04-15571-008 04-15571-009

RH LH X X Steel or Aluminum Steel or Aluminum Cast Cast Yes Yes No No Yes Yes

HUB PILOTED -- Hub and Stud Assemblies Without Drums

04-15571-006 04-15571-005

X X Steel Aluminum Cast Cast Yes Yes No No Yes Yes

STUD PILOTED -- Hub and Drum Assemblies With 16.5" X 7" Drum (03-123207-002)

14-15571-125 14-15571-126

RH LH X X Steel or Aluminum Steel or Aluminum Cast Cast Yes Yes No No Yes Yes

HUB PILOTED -- Hub and Drum Assemblies With 16.5" X 7" Drum (03-123207-002)

14-15571-114 14-15571-1101

X X Steel Aluminum Cast Cast Yes Yes No No Yes Yes

Note: Other combinations are available. For information please call the specifications department 1-888-725-9355. Not all of the numbers listed above are stocking items, some may have lead times involved.

45

TRAILER HUBS

DAYTON NO. 04-15593-XXX DESCRIPTION Trailer Hub

Outboard Drum

TYPE 10 hole

Serrated Studs

INNER BEARING CUP

HM518410

CONE

HM518445

BOLT CIRCLE

11.250"

OUTER BEARING CUP HM518410

CONE HM518445

DRAWING REFERENCE A B C D E F G

ITEM Overall Length Outer Hub Cap Face To Inner Brg. Cup Seat Distance Between Cups Bolt Circle Diameter Wheel Stud Qty. Pilot Diameter Hub Cap Mount

DIMENSION 9.06" 6.94" 4.5" 11.25" 10" 8.78" 6.5"-8 TPI

FOR AXLE MODELS:

DANA SPICER EATON: 225P, 230P, P-22 FRUEHAUF: PRO-PAR MERITOR: TP HENDRICKSON: HP INGERSOLL: A24H, A24S, F24

STUDS USED WITH HUB IN ASSEMBLIES

STUD NO. 09-001989 09-002000 09-001910 09-001911 THEAD TYPE SIZE Serr. M22 x 1.5 Serr. M22 x 1.5 Serr. 3/4"-16 R Serr. 3/4"-16 L STYLE Hub Piloted Hub Piloted Stud Piloted Stud Piloted WHEEL TYPE Steel Wheel Aluminum Wheel Steel Wheel Steel Wheel USE WITH DRUM TYPE Cast Cast Cast Cast

DRUMS USED WITH HUB IN ASSEMBLIES

DRUM NO. 03-123365-002 85-123365-002 03-123406-002 03-123207-002 85-123207-002 ABS RING NO. 09-001868 DRUM TYPE Cast Non-Balanced Cast MTB Cast Non-Balanced Cast Non-Balanced Cast MTB BRAKE SIZE 16.5" x 7" 16.5" x 7" 16.5" x 8.625" 16.5" x 7" 16.5" x 7" OVERALL DEPTH 10.590" 10.590" 11.980" 10.540" 10.540" PILOT 8.780" 8.780" 8.780" 8.780" 8.780"

DESCRIPTION 100 Tooth

46

TRAILER HUBS

HUB PART NUMBER

HAND CUPS WHEEL TYPE DRUM TYPE STUDS INNER / OUTER NUTS ABS

STUD PILOTED -- Hub and Stud Assemblies Without Drum

04-15593-025 04-15593-026

RH LH X X Steel or Aluminum Steel or Aluminum Cast Cast Yes Yes No No Yes Yes

HUB PILOTED -- Hub and Stud Assemblies Without Drum

04-15593-002 04-15593-003

X X Steel Aluminum Cast Cast Yes Yes No No Yes Yes

STUD PILOTED -- Hub and Drum Assemblies With 16.5" X 7" Drum (03-123207-002)

14-15593-275 14-15593-276

RH LH X X Steel or Aluminum Steel or Aluminum Cast Cast Yes Yes No No Yes Yes

HUB PILOTED -- Hub and Drum Assemblies With 16.5" X 7" Drum (03-123207-002)

14-15593-260 14-15593-261

X X Steel Aluminum Cast Cast Yes Yes No No Yes Yes

Note: Other combinations are available. For information please call the specifications department 1-888-725-9355. Not all of the numbers listed above are stocking items, some may have lead times involved.

47

TRAILER HUBS

DAYTON NO. 04-15656-XXX DESCRIPTION Trailer Hub

Outboard Drum

TYPE 10 hole

Serrated Studs

INNER BEARING CUP

HM518410

CONE

HM518445

BOLT CIRCLE

11.250"

OUTER BEARING CUP

HM518410

CONE

HM518445

DRAWING REFERENCE A B C D E F G

ITEM Overall Length Outer Hub Cap Face To Inner Brg. Cup Seat Distance Between Cups Bolt Circle Diameter Wheel Stud Qty. Pilot Diameter Hub Cap Hole Pattern

DIMENSION 8.08" 5.96" 4.5" 11.25" 10" 8.78" 6, 5/16"-18; 5.5" B.C.

FOR AXLE MODELS:

DANA SPICER EATON: 225P, 230P, P-22 FRUEHAUF: PRO-PAR MERITOR: TP HENDRICKSON: HP INGERSOLL: A24H, A24S, F24

STUDS USED WITH HUB IN ASSEMBLIES

STUD NO. 09-001989 09-002003 09-002002 09-002049 09-002050 09-001910 09-001911 THEAD TYPE SIZE Serr. M22 x 1.5 Serr. M22 x 1.5 Serr. M22 x 1.5 Serr. 3/4"-16 R Serr. 3/4"-16 L Serr. 3/4"-16 R Serr. 3/4"-16 L STYLE Hub Piloted Hub Piloted Hub Piloted Stud Piloted Stud Piloted Stud Piloted Stud Piloted WHEEL TYPE Steel Wheel Aluminum Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel USE WITH DRUM TYPE Cast Cast X-30 X-30 X-30 Cast Cast

DRUMS USED WITH HUB IN ASSEMBLIES

DRUM NO. 03-123365-002 85-123365-002 03-123406-002 03-123406-002 85-123406-002 03-123207-002 95-123207-002 85-123207-002 03-123570-002 53-123537-002 ABS RING NO. 09-001867 DRUM TYPE Cast Non-Balanced Cast X10 MTB Cast MTB Cast Non-Balanced Cast MTB Cast Non-Balanced Cast X10 MTB Cast MTB Cast Non-Balanced X-30 BRAKE SIZE 16.5" x 7" 16.5" x 7" 16.5" x 7" 16.5" x 8.625" 16.5" x 8.625" 16.5" x 7" 16.5" x 7" 16.5" x 7" 16.5" x 8.625" 16.5" x 7" OVERALL DEPTH 10.590" 10.590" 11.980" 11.980" 11.980" 10.540" 10.540" 10.540" 11.25" 10.38" PILOT 8.780" 8.780" 8.780" 8.780" 8.780" 8.780" 8.780" 8.780" 8.780" 8.780"

DESCRIPTION 100 Tooth

48

TRAILER HUBS

HUB PART NUMBER 04-15656-001 04-15656-022

HAND CUPS WHEEL TYPE N/A N/A DRUM TYPE N/A N/A STUDS INNER / OUTER NUTS N/A N/A ABS X X No No No Yes

STUD PILOTED -- Hub and Stud Assemblies Without Drums

04-15656-016 04-15656-014 04-15656-017 04-15656-015 04-15656-013 04-15656-011 04-15656-012 04-15656-010

RH RH LH LH LH LH RH LH X X X X X X X X Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Cast Cast Cast Cast X-30 X-30 X-30 X-30 Yes Yes Yes Yes Yes Yes Yes Yes No No No No No No No No No Yes No Yes No Yes No Yes

HUB PILOTED -- Hub and Stud Assemblies Without Drums

04-15656-006 04-15656-007 04-15656-019 04-15656-018

X X X X Steel Steel Aluminum Aluminum Cast Cast Cast or X-30 Cast or X-30 Yes Yes Yes Yes No No No No No Yes No Yes

STUD PILOTED -- Hub and Drum Assemblies With 16.5" X 7" Drum (03-123207-002 or 53-123537-002)

14-15656-129 14-15656-131 14-15656-130 14-15656-132 14-15656-372X30 14-15656-370X30 14-15656-373X30 14-15656-371X30

RH RH LH LH RH RH LH LH X X X X X X X X Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Cast Cast Cast Cast X-30 X-30 X-30 X-30 Yes Yes Yes Yes Yes Yes Yes Yes No No No No No No No No No Yes No Yes No Yes No Yes

HUB PILOTED -- Hub and Drum Assemblies With 16.5" X 7" Drum (03-123207-002 or 53-123537-002)

14-15656-111 14-15656-113 14-15656-112 14-15656-114 14-15656-350X30 14-15656-352X30 14-15656-351X30 14-15656-353X30

X X X X X X X X Steel Steel Aluminum Aluminum Steel Steel Aluminum Aluminum Cast Cast Cast Cast X-30 X-30 X-30 X-30 Yes Yes Yes Yes Yes Yes Yes Yes No No No No No No No No No Yes No Yes No Yes No Yes

Note: Other combinations are available. For information please call the specifications department 1-888-725-9355. Not all of the numbers listed above are stocking items, some may have lead times involved.

49

TRAILER HUBS

DAYTON NO. 04-15857-XXX DESCRIPTION Trailer Hub

Outboard Drum

TYPE 10 hole

Serrated Studs

INNER BEARING CUP

HM218210

CONE

HM218248

BOLT CIRCLE

11.250"

OUTER BEARING CUP HM212011

CONE HM212049

DRAWING REFERENCE A B C D E F G

ITEM

DIMENSION

Overall Length 6.93" Outer Hub Cap Face To Inner Brg. Cup Seat 4.74" Distance Between Cups 3.34" Bolt Circle Diameter 11.25" Wheel Stud Qty 10" Pilot Diameter 8.75" Hub Cap Hole Pattern 6, 5/16"-18; 5.5" B.C.

FOR AXLE MODELS:

DANA SPICER EATON: D-22, K-22, J, JE, JH, 23L, 23R DEXTER: D200K, D2225K HENDRICKSON: HN INGERSOLL: A22H, A22S, A22T, DC22H, F22 K-B: KBW-KBS MERITOR: RN, RQ, TKN, TN, TQ, TQC, TQD STD. FORGE: A-22H, A-22S, A-22T WESTPORT: F3W-1600, F3W-1800/2000, F3W-1800D/2000D

STUDS USED WITH HUB IN ASSEMBLIES

STUD NO. 09-001989 09-002003 09-002002 09-002049 09-002050 09-001910 09-001911 THEAD TYPE SIZE Serr. M22 x 1.5 Serr. M22 x 1.5 Serr. M22 x 1.5 Serr. 3/4"-16 R Serr. 3/4"-16 L Serr. 3/4"-16 R Serr. 3/4"-16 L STYLE Hub Piloted Hub Piloted Hub Piloted Stud Piloted Stud Piloted Stud Piloted Stud Piloted WHEEL TYPE Steel Wheel Aluminum Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel USE WITH DRUM TYPE Cast Cast X-30 X-30 X-30 Cast Cast

DRUMS USED WITH HUB IN ASSEMBLIES

DRUM NO. 03-123207-002 95-123207-002 85-123207-002 53-123537-002 DRUM TYPE Cast Non-Balanced Cast X10 Cast MTB X-30 BRAKE SIZE 16.5" x 7" 16.5" x 7" 16.5" x 7" 16.5" x 7" OVERALL DEPTH 10.540" 10.540" 10.540" 10.380" PILOT 8.780" 8.780" 8.780" 8.780"

ABS RING NO. 09-001867

DESCRIPTION 100 Tooth

50

TRAILER HUBS

HUB PART NUMBER

HAND CUPS WHEEL TYPE DRUM TYPE STUDS INNER / OUTER NUTS ABS

STUD PILOTED -- Hub and Drum Assemblies With 16" X 7" Drum (03-123207-002 or 53-123537-002)

14-15857-058 14-15857-060 14-15857-059 14-15857-061 14-15857-118X30 14-15857-116X30 14-15857-119X30 14-15857-117X30

RH RH LH LH RH RH LH LH X X X X X X X X Steel Steel Steel Steel Steel Steel Steel Steel Cast Cast Cast Cast X-30 X-30 X-30 X-30 Yes Yes Yes Yes Yes Yes Yes Yes Yes 10 cap Yes 10 cap Yes 10 cap Yes 10 cap No No No No No Yes No Yes No Yes No Yes

HUB PILOTED -- Hub and Drum Assemblies With 16.5" X 7" Drum (03-123207-002 or 53-123537-002)

14-15857-052 14-15857-056 14-15857-053 14-15857-057 14-15857-100X30 14-15857-104X30 14-15857-101X30 14-15857-105X30

X X X X X X X X Steel Steel Aluminum Aluminum Steel Steel Aluminum Aluminum Cast Cast Cast Cast X-30 X-30 X-30 X-30 Yes Yes Yes Yes Yes Yes Yes Yes No No No No No No No No No Yes No Yes No Yes No Yes

HUB PILOTED -- Hub and Drum Assemblies With 16.5" X 8.62" Drum ( 53-123544-002)

14-15857-150X30 14-15857-154X30 14-15857-151X30 14-15857-155X30

X X X X Steel Steel Aluminum Aluminum X-30 X-30 X-30 X-30 Yes Yes Yes Yes No No No No No Yes No Yes

Note: Other combinations are available. For information please call the specifications department 1-888-725-9355. Not all of the numbers listed above are stocking items, some may have lead times involved.

51

ULTRA LITE WEIGHT TP TRAILER HUBS

DAYTON NO. 04-15944-XXX DESCRIPTION Trailer Hub

Outboard Drum

TYPE 10 hole

Serrated Studs

INNER BEARING CUP

HM518410

CONE

HM518445

BOLT CIRCLE

11.250"

OUTER BEARING CUP HM518410 HUB WEIGHT

37 lbs.

CONE HM518445 AXLE RATING

20K

DRAWING REFERENCE A B C D E F G

ITEM

DIMENSION

Overall Length 8.08" Outer Hub Cap Face To Inner Brg. Cup Seat 5.96" Distance Between Cups 4.500" Bolt Circle Diameter 11.25" Wheel Stud Qty. 10" Pilot Diameter 8.77" Hub Cap Hole Pattern 6, 5/16"-18; 5.5" B.C.

FOR AXLE MODELS:

DANA SPICER EATON: 225P, 230P, P-22 FRUEHAUF: PRO-PAR MERITOR: TP HENDRICKSON: HP INGERSOLL: A24H, A24S, F24

STUDS USED WITH HUB IN ASSEMBLIES

STUD NO. 09-001989 09-002003 09-002049 09-002050 09-001910 09-001911 THEAD TYPE SIZE Serr. M22 x 1.5 Serr. M22 x 1.5 Serr. 3/4"-16 R Serr. 3/4"-16 L Serr. 3/4"-16 R Serr. 3/4"-16 L STYLE Hub Piloted Hub Piloted Stud Piloted Stud Piloted Stud Piloted Stud Piloted WHEEL TYPE Steel Wheel Aluminum Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel USE WITH DRUM TYPE Cast Cast X-30 X-30 Cast Cast

DRUMS USED WITH HUB IN ASSEMBLIES

DRUM NO. 03-123207-002 95-123207-002 85-123207-002 53-123537-002 DRUM TYPE Cast Non-Balanced Cast X10 Cast MTB X-30 BRAKE SIZE 16.5" x 7" 16.5" x 7" 16.5" x 7" 16.5" x 7" OVERALL DEPTH 10.546" 10.540" 10.540" 10.380" PILOT 8.780" 8.780" 8.780" 8.780"

ABS RING NO. 09-001867

DESCRIPTION 100 Tooth

52

ULTRA LITE WEIGHT TP TRAILER HUBS

HUB PART NUMBER

HAND CUPS WHEEL TYPE DRUM TYPE STUDS INNER / OUTER NUTS ABS

STUD PILOTED --Hub And Stud Assemblies Without Drums

04-15944-011 04-15944-009 04-15944-012 04-15944-010

RH RH LH LH X X X X Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Cast Cast Cast Cast Yes Yes Yes Yes No No No No No Yes No Yes

HUB PILOTED -- Hub and Stud Assembies Without Drums

04-15944-001 04-15944-003 04-15944-002 04-15944-004

X X X X Steel Steel Aluminum Aluminum Cast Cast Cast Cast Yes Yes Yes Yes No No No No No Yes No Yes

HUB AND DRUM ASSEMBLIES STUD PILOTED -- Hub and Drum Assemblies With 16.5" X 7" Drum (03-123207-002)

14-15944-1008 14-15944-1010 14-15944-1009 14-15944-1011

RH RH LH LH X X X X Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Cast Cast Cast Cast Yes Yes Yes Yes No No No No No Yes No Yes

HUB PILOTED -- Hub and Drum Assemblies With 16.5" X 7" Drum (03-123207-002 or 53-123537-002)

14-15944-1000 14-15944-1003 14-15944-1004 14-15944-1006 14-15944-1022X30 14-15944-1023X30 14-15944-1024X30 14-15944-1026X30

X X X X X X X X Steel Steel Aluminum Aluminum Steel Steel Aluminum Aluminum Cast Cast Cast Cast X-30 X-30 X-30 X-30 Yes Yes Yes Yes Yes Yes Yes Yes No No No No No No No No No Yes No Yes No Yes No Yes

Note: Other combinations are available. For information please call the specifications department 1-888-725-9355. Not all of the numbers listed above are stocking items, some may have lead times involved.

53

LITE WEIGHT TP TRAILER HUBS

DAYTON NO. 04-15968-XXX DESCRIPTION Trailer Hub

Outboard Drum

TYPE 10 hole

Serrated Studs

INNER BEARING CUP

HM518410

CONE

HM518445

BOLT CIRCLE

11.250"

OUTER BEARING CUP HM518410 HUB WEIGHT

42 lbs.

CONE HM518445 AXLE RATING

25K

DRAWING REFERENCE A B C D E F G

ITEM

DIMENSION

Overall Length 8.08" Outer Hub Cap Face To Inner Brg. Cup Seat 5.96" Distance Between Cups 4.50" Bolt Circle Diameter 11.25" Wheel Stud Qty. 10" Pilot Diameter 8.77" Hub Cap Hole Pattern 6, 5/16"-18; 5.5" B.C.

FOR AXLE MODELS:

DANA SPICER EATON: 225P, 230P, P-22 FRUEHAUF: PRO-PAR MERITOR: TP HENDRICKSON: HP INGERSOLL: A24H, A24S, F24

STUDS USED WITH HUB IN ASSEMBLIES

STUD NO. 09-001989 09-002003 09-002049 09-002050 09-001910 09-001911 THEAD TYPE SIZE Serr. M22 x 1.5 Serr. M22 x 1.5 Serr. 3/4"-16 R Serr. 3/4"-16 L Serr. 3/4"-16 R Serr. 3/4"-16 L STYLE Hub Piloted Hub Piloted Stud Piloted Stud Piloted Stud Piloted Stud Piloted WHEEL TYPE Steel Wheel Aluminum Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel USE WITH DRUM TYPE Cast Cast X-30 X-30 Cast Cast

DRUMS USED WITH HUB IN ASSEMBLIES

DRUM NO. 03-123207-002 95-123207-002 85-123207-002 53-123537-002 DRUM TYPE Cast Non-Balanced Cast X10 Cast MTB X-30 BRAKE SIZE 16.5" x 7" 16.5" x 7" 16.5" x 7" 16.5" x 7" OVERALL DEPTH 10.540" 10.540" 10.540" 10.380" PILOT 8.780" 8.780" 8.780" 8.780"

ABS RING NO. 09-001867

DESCRIPTION 100 Tooth

54

LITE WEIGHT TP TRAILER HUBS

HUB PART NUMBER

HAND CUPS WHEEL TYPE DRUM TYPE STUDS INNER / OUTER NUTS ABS

STUD PILOTED --Hub and Stud Assemblies Without Drums

04-15968-016 04-15968-014 04-15968-017 04-15968-015

RH RH LH LH X X X X Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Cast Cast Cast Cast Yes Yes Yes Yes No No No No No Yes No Yes

HUB PILOTED--Hub and Stud Assembies Without Drums

04-15968-002 04-15968-007 04-15968-003 04-15968-009

X X X X Steel Steel Aluminum Aluminum Cast Cast Cast Cast Yes Yes Yes Yes No No No No No Yes No Yes

STUD PILOTED -- Hub and Drum Assemblies With 16.5" X 7" Drum (03-123207-002)

14-15968-129 14-15968-131 14-15968-130 14-15968-132

RH RH LH LH X X X X Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Cast Cast Cast Cast Yes Yes Yes Yes No No No No No Yes No Yes

HUB PILOTED -- Hub and Drum Assemblies with 16.5" X 7" Drum (03-123207-002 or 53-123537-002)

14-15968-111 14-15968-1033 14-15968-112 14-15968-114 14-15968-350X30 14-15968-352X30 14-15968-351X30 14-15968-353X30

X X X X X X X X Steel Steel Aluminum Aluminum Steel Steel Aluminum Aluminum Cast Cast Cast Cast X-30 X-30 X-30 X-30 Yes Yes Yes Yes Yes Yes Yes Yes No No No No No No No No No Yes No Yes No Yes No Yes

Note: Other combinations are available. For information please call the specifications department 1-888-725-9355. Not all of the numbers listed above are stocking items, some may have lead times involved.

55

LITE WEIGHT TN TRAILER HUBS

DAYTON NO. 04-15984-XXX DESCRIPTION Trailer Hub TYPE 10 hole

Serrated Studs

INNER BEARING CUP

HM218210

CONE

HM218248

BOLT CIRCLE

11.250"

OUTER BEARING CUP HM212011 HUB WEIGHT

38 lbs.

CONE HM212049 AXLE RATING

23K

DRAWING REFERENCE A B C D E F G

ITEM

DIMENSION

Overall Length 6.93" Outer Hub Cap Face To Inner Brg. Cup Seat 3.35" Distance Between Cups 3.34" Bolt Circle Diameter 11.25" Wheel Stud Qty. 10" Pilot Diameter 8.77" Hub Cap Hole Pattern 6, 5/16"-18; 5.5" B.C.

FOR AXLE MODELS:

DANA SPICER EATON: D-22, K-22, J, JE, JH, 23L, 23R DEXTER: D200K, D2225K HENDRICKSON: HN INGERSOLL: A22H, A22S, A22T, DC22H, F22 A-22S K-B: KBW-KBS MERITOR: RN, RQ, TKN, TN, TQ, TQC, TQD STD. FORGE: A-22H, A-22S, A-22T WESTPORT: F3W-1600, F3W-1800/2000, F3W-1800D/2000D

STUDS USED WITH HUB IN ASSEMBLIES

STUD NO. 09-001989 09-002003 09-002049 09-002050 09-001910 09-001911 THEAD TYPE SIZE Serr. M22 x 1.5 Serr. M22 x 1.5 Serr. 3/4"-16 R Serr. 3/4"-16 L Serr. 3/4"-16 R Serr. 3/4"-16 L STYLE Hub Piloted Hub Piloted Stud Piloted Stud Piloted Stud Piloted Stud Piloted WHEEL TYPE Steel Wheel Aluminum Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel USE WITH DRUM TYPE Cast Cast X-30 X-30 Cast Cast

DRUMS USED WITH HUB IN ASSEMBLIES

DRUM NO. 03-123207-002 95-123207-002 85-123207-002 53-123537-002 ABS RING NO. 09-001867 DRUM TYPE Cast Non-Balanced Cast X10 Cast MTB X-30 BRAKE SIZE 16.5" x 7" 16.5" x 7" 16.5" x 7" 16.5" x 7" OVERALL DEPTH 10.540" 10.540" 10.540" 10.380" PILOT 8.780" 8.780" 8.780" 8.780"

DESCRIPTION 100 Tooth

56

LITE WEIGHT TN TRAILER HUBS

HUB PART NUMBER 04-15984-001 04-15984-014

HAND CUPS WHEEL TYPE N/A N/A DRUM TYPE N/A N/A STUDS INNER / OUTER NUTS No No ABS X X No No No Yes

STUD PILOTED -- Hub and Stud Assemblies Without Drums

04-15984-007 04-15984-006 04-15984-009 04-15984-008

RH RH LH LH X X X X Steel or Aluminum Steel or Aluminum Steel or Aluminum Steel or Aluminum Cast Cast Cast Cast Yes Yes Yes Yes No No No No No Yes No Yes

HUB PILOTED -- Hub and Stud Assembies Without Drums

04-15984-003 04-15984-002 04-15984-005 04-15984-004

X X X X Steel Steel Aluminum Aluminum Cast Cast Cast Cast Yes Yes Yes Yes No No No No No Yes No Yes

HUB PILOTED -- Hub and Drum Assemblies With 16.5" X 7" Drum (03-123207-002 or 53-123537-002)

14-15984-1067 14-15984-1069 14-15984-1068 14-15984-1070 14-15984-1036X30 14-15984-1037X30 14-15984-1038X30 14-15984-1039X30

X X X X X X X X Steel Steel Aluminum Aluminum Steel Steel Aluminum Aluminum Cast Cast Cast Cast X-30 X-30 X-30 X-30 Yes Yes Yes Yes Yes Yes Yes Yes No No No No No No No No No Yes No Yes No Yes No Yes

Note: Other combinations are available. For information please call the specifications department 1-888-725-9355. Not all of the numbers listed above are stocking items, some may have lead times involved.

57

CROSS REFERENCE

GUNITE #

2705 2997 3401 3467 2256C 2353C 2400 2546B 2546C 2577A 2603 2604 2672 2697 2717 2845 2850 2851 2974 2983C 2997A 2997C 2997D 2997D 2997D 2997D 2997D 3012A 3012B 3012B 3018A 3018A 3018B 3018B 3022B 3023 3120 3136A 3136B 3141 3141B 3166 3168 3169 3169A 3174 3186 3195 3197 3244A

PART NO.

03-012582-002 03-123430-002 03-123365-002 03-122971-002 03-120556-002 03-122822-002 03-120933-001 03-122506-002 13-120586-002 03-120754-002 03-120517-002 03-120516-002 03-122603-002 03-120459-002 03-120553-002 03-122597-002 03-120705-002 03-120442-002 03-120574-002 03-122222-002 03-123430-002 03-123430-002 03-123430-002 03-122009-002 03-123200-002 03-123430-002 03-122009-002 03-122239-002 03-122027-002 03-122290-002 03-122126-002 03-122518-002 03-120586-002 03-123058-002 03-123427-002 03-122078-002 03-120877-002 03-122455-002 03-122925-002 03-122550-002 03-123409-002 03-122978-002 03-120376-002 03-122561-002 03-122562-002 03-122963-002 03-122314-002 03-120149-002 03-120936-002 03-122575-002

COMMENTS

GUNITE #

3244B 3289 3289 3292 3294 3295A 3295A 3402 3441 3483 3485B 3485BX 3544 3600A 3604 3638A 3674 3676 3687 3699 3710 3721AX 3721AX 3721AX 3721AX 3721X 3726X 3732 3750B 3760B 3760B 3767 3800X 8656 8656 FX196KX HF624K HF770K HR865K HR866K RA707K RX226K RX254K RX458K RX75K RY232K TA454K TX228K TX745K TX746K

PART NO.

85-122575-002 03-122266-002 03-123500-002 13-122038-002 13-122296-002 03-122490-002 03-122683-002 03-123397-002 85-123297-002 03-122607-002 03-122011-002 85-123203-002 03-012480-002 03-123207-002 13-122039-002 03-123020-002 03-120981-002 03-120988-002 13-123400-002 03-122453-002 13-123383-002 85-123254-002 85-123366-002 85-123382-002 85-123421-002 85-123366-002 03-123448-002 03-012582-002 03-123466-002 03-122104-002 03-123431-002 03-120855-002 03-123448-002 03-120743-002 03-122600-002 55-15835-001 05-15632-001 05-15632-001 04-15510-004 04-15510-004 47-09965-001 47-14395-001 47-15725-001 47-09965-001 47-15203-001 47-15531-001 47-09715-002 47-14018-020 47-07791-013 47-14018-002

COMMENTS

Gunite 5/6 Hole

58

CROSS REFERENCE (Cont'd.)

GUNITE #

TX802K TX877K TY454K TY745K TY746K

PART NO.

47-09715-002 47-14018-007 47-14938-001 47-07841-008 47-14068-007

COMMENTS

WEBB #

61548 61566 61586 61727 61733 61733 61780 61788 61791 62115B 62117 62200 62240 62358 62997 62997

PART NO.

03-120933-002 03-120516-002 03-122806-002 03-120442-002 13-120142-002 13-120140-002 03-120754-002 03-120936-002 03-120149-002 13-122038-002 03-122266-002 03-012582-002 03-120574-002 03-122488-002 03-122009-002 03-123430-002 03-123200-002 85-123203-002 03-122011-002 03-122963-002 03-122963-002 03-120705-002 03-122561-002 03-122562-002 03-120459-002 03-120553-002 03-122575-002 03-120517-002 03-122597-002 03-120556-002 03-122314-002 03-122078-002 03-120981-002 03-123020-002 03-123427-002 03-122104-002 03-120855-002 03-123366-002 03-123025-002 03-123302-002 03-122513-002 03-123207-002 03-122948-002 85-123297-002 03-123397-002 03-123409-002 03-122453-002 03-122607-002 03-122978-002 03-122550-002

COMMENTS

WEBB #

1020 1099 1320 1391 1521 1528 1622 1623 2023 2023 2023 2091 2323 2523 2643 2653 2656 7015 7315 7520 8320 8520 62117 66864 66884 68931 20231UH3 20231UH3 20231UH3T 20231UH3T 20231UQML 20231UQML 20231UQMLT 20231UQMLT 20231UQMR 20231UQMR 20231UQMRT 20231UQMRT 60876 61529

PART NO.

04-15571-004 04-15571-004 04-15502-002 04-15502-002 05-15632-001 05-15632-001 04-15675-002 04-15675-002 04-15501-013 04-15501-014 04-15571-004 04-15571-004 04-15502-002 05-15632-001 04-15675-002 04-15828-002 04-15828-002 47-14054-002 47-14054-002 47-14018-007 47-07791-003 47-07791-013 03-123500-002 03-123207-002 03-123365-002 03-120376-002 14-15501-050 14-15501-050 14-15501-074 14-15501-074 14-15501-378 14-15501-378 14-15501-506 14-15501-506 14-15501-377 14-15501-377 14-15501-505 14-15501-505 03-120877-002 03-122529-002

COMMENTS

With Bearing Cups NO ABS With Bearing Cups and ABS Same As 04-15501

62998 63035 63035 63617 63647 64018 64404 64405 64406 64408 64414 64420 64425 64428 64453 64478 64481 64489 65266 65514 65516 65545 66250 66366 66817 66864 66865 66865 66873 66875 66892 66893 66893 66895

59

CROSS REFERENCE (Cont'd.)

WEBB #

67101 67518 67518 68012 68012 68013 68730 68730 68732 68733 68760 68765 68765 68897

PART NO.

03-122978-002 03-122822-002 03-122222-002 03-122290-002 03-122027-002 03-122239-002 03-122126-002 03-122518-002 03-123058-002 03-122126-002 03-122603-002 03-120586-002 03-120586-002 03-122600-002

COMMENTS

WEBB #

68897 68903 68921 68927 68942 68946 68958 68981 68981 68988 69877B 69996B 75209A

PART NO.

03-120743-002 03-012480-002 03-122506-002 03-120376-002 03-122455-002 03-122284-002 03-122925-002 03-122490-002 03-122683-002 03-120988-002 53-123583-002 53-123537-002 47-14018-013

COMMENTS

HAYES COMPONENTS DRUM BACK NO. DRUM BAND NO.

91294 88253 91793 91538 91026 91611 87157 88798 91136 91029 91025 88798 91611 91538 91611 91538 88798 88152 87418 87416 88810 90599 87709 91293 91008 87443 91654 88116 91611 91538 90173 91028 87298 91795 87105 91028 87105 87105 87105 91028 91028 91028 87618 87618 87618 87298 87298 87298 87105 87105 87105 87369 87369 87369 87132 87132 87132 87132 91028 87618 87618 87311

HAYES PART NUMBER

90089BK 87397B 91792B 89996B 89870BK 87101B 87156B 88797B 91137BK 90660BK 88870BK 89571B 87615B 90486B 87295B 89877B 89651B 87407B 87417B 87415B 88814B 90600B 87707B 90148B 87128B 87442B 91655B 88114B 89467B 90434B 90174B

CURRENTLY AVAILABLE

X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

PART NO.

53-123512-002 53-123519-002 53-123535-002 53-123537-002 53-123542-002 53-123544-002 53-123564-002 53-123565-002 53-123566-002 53-123567-002 53-123568-002 53-123575-002 53-123579-002 53-123580-002 53-123581-002 53-123582-002 53-123583-002 53-123584-002 53-123585-002 53-123586-002 53-123587-002 53-123588-002 53-123589-002 53-123590-002 53-123591-002 53-123592-002 53-123593-002 53-123594-002 53-123595-002 53-123596-002 53-123597-002 53-123598-002

60

CROSS REFERENCE (Cont'd.)

HAYES COMPONENTS DRUM BACK NO. DRUM BAND NO.

90175 91724 91722 91481 91439 88435 91507 91052 91264 91024 87311 91480 91480 91480 91480 87369 87369 87298 87298 91028

HAYES PART NUMBER

90176B 91725B 91723B 91482B 91438B 88739B 90137B 91049B 91265B 87945B

CURRENTLY AVAILABLE

X X X X

PART NO.

53-123599-002 53-123600-002 53-123601-002 53-123602-002 53-123603-002 53-123604-002

X X X X X

53-123605-002 53-123606-002 53-123607-002 53-123608-002 53-123609-002 53-123627-002

HAYES PART NO.

87101B 87128B 87156B 87295B 87397B 87407B 87415B 87417B 87442B 87615B 87707B 87945B 88114B 88739B 88797B 88814B 88870BK 89467B 89571B 89651B 89870BK 89877B 89996B 90089BK 90137B 90148B 90174B 90176B 90434B 90486B 90600B 90660BK 91049B 91137BK 91265B

PART NO.

53-123564-002 53-123592-002 53-123565-002 53-123582-002 53-123519-002 53-123585-002 53-123587-002 53-123586-002 53-123593-002 53-123580-002 53-123590-002 53-123609-002 53-123595-002 53-123605-002 53-123566-002 53-123588-002 53-123575-002 53-123596-002 53-123579-002 53-123584-002 53-123542-002 53-123583-002 53-123537-002 53-123512-002 53-123606-002 53-123591-002 53-123598-002 53-123599-002 53-123597-002 53-123581-002 53-123589-002 53-123568-002 53-123607-002 53-123567-002 53-123608-002

COMMENTS

HAYES PART NO.

91438B 91482B 91655B 91723B 91725B 91792B

PART NO.

53-123604-002 53-123603-002 53-123594-002 53-123602-002 53-123601-002 53-123535-002 53-123544-002 53-123600-002 53-123627-002

COMMENTS

ERIE WHEEL

2738 2738 2740 2740-1 2750-1 2750-1 2751 2752 2760 2762 2764 2764-5 2764-51 2765 2766 2769 2770 2771 2771-18 2773 2773-3 2774

PART NO.

03-122222-002 03-122822-002 03-120586-002 03-122126-002 03-120574-002 03-012480-002 03-012488-002 03-122963-002 03-012582-002 03-120754-002 03-123207-002 03-123207-002 03-120877-002 03-122600-002 03-120936-002 03-122452-002 03-122683-002 03-122550-002 03-123409-002 03-122455-002 03-122925-002 03-122948-002

COMMENTS

61

CROSS REFERENCE

ERIE WHEEL

2775 704-52 704-53 7041-52 705-52 705-53 706-52 706-53 708-00 708-00 708-53 708-59 904 904-20 9041 9041-20

(Cont'd.)

ERIE WHEEL

9080 9080-20 9091-20 920 920-20 920-2738 9201 9201-20 922 9221 9221-20 9280 9280-20 9286 9501

PART NO.

03-123430-002 04-14059-001 04-14059-001 04-09747-001 04-18802-009 14-14802-009 04-15501-001 04-15501-001 04-15502-004 04-15502-005 04-15502-001 04-15502-001 47-14018-007 47-14018-007 47-07791-013 47-07791-013

COMMENTS

PART NO.

47-09715-002 47-09715-002 47-08210-009 47-14068-007 47-14068-007 48-14068-051 47-07841-008 47-07841-008 47-15419-002 47-08211-007 47-08211-001 47-14938-001 47-09170-010 47-09170-010 47-09763-004

COMMENTS

62

ROTOR CROSS REFERENCE

WEBB

54102 54102 54103 54103 54104 54104 54104 54104 54104 54105 54106 54106 54251 54251 54301 54301 54301 54351 54351 54352 54769 54770 54771 54771

PART NO.

23-122687-002 23-123468-002 23-122700-002 23-123434-002 23-122688-002 23-123459-002 23-123486-002 23-123487-002 23-123495-002 23-123480-002 23-123296-002 23-123495-002 23-122527-002 23-123458-002 23-122729-002 23-123440-002 23-123443-002 23-122691-002 23-123439-002 23-122743-002 23-123573-004 23-123572-004 23-122897-002 23-123552-004

GUNITE

R6115 R6115A R6145

PART NO

23-122728-002 23-122962-002 23-122945-002

BENDIX

141269 141269 141270 141271 141271 141272 141272 141273 141274 141274 141275 141276 141475 141476 141493 141494 141585 141606 141858 141874 141490 141608 141627 141628

PART NO.

23-122700-002 23-123434-002 23-122691-002 23-122687-002 23-123468-002 23-122729-002 23-123440-002 23-122527-002 23-122701-002 23-123460-002 23-122703-002 23-122743-002 23-123572-004 23-123573-004 23-122920-002 23-122897-002 23-122688-002 23-122693-002 23-103887-002 23-123296-002 23-123046-002 23-122945-002 23-122962-002 23-122728-002

GUNITE

D5054A D6052 D6052 D6054 D6054 D6054A D6054A D6054A D6054A D6054C D6054C D6054C D6059 D6128 D6128 D6128A D6128A D6133 D6151 D6170 D6176 ABS (D6153 non ABS) D6183 R6054C

PART NO.

23-123495-002 23-122729-002 23-123440-002 23-122687-002 23-123468-002 23-122688-002 23-123459-002 23-123486-002 23-123487-002 23-122700-002 23-123434-002 23-123480-002 23-122693-002 23-122701-002 23-123460-002 23-122920-002 23-123494-002 23-122897-002 23-123489-002 23-103887-002 23-123550-004 23-123552-004 23-123443-002

GM

15514406 15514492 15515786 15579020 15611098 15661543 15579754

PART NO.

23-122729-002 23-122693-002 23-122687-002 23-123041-002 23-122688-002 23-123296-002 23-123046-002

FORD

E3HZ1102A E4HZ1125A E4HZ1125A E4HZ1125C

PART NO.

23-122691-002 23-122700-002 23-123434-002 23-122703-002

63

EUCLID INDUSTRIES, LLC

Building the most trusted name in truck parts all started with one man's uncompromising ideals. In 1939, Zygmunt Zukowski founded Euclid Industries with a keen attention to every engineering detail. Over the years, the building of trust continued with a relentless drive for perfection at every stage. In catalogs. In filling customer orders. In expert service, support and caring for the customer. Earning trust every day means more quality control, inspections and more sensitivity to the needs of customers. That's why Euclid has grown to become the premier truck aftermarket distributor in the United States and Canada. In January of 1999 we officially became a part of Meritor Automotive and then later ArvinMeritor. But through all the changes our principles have remained the same. Today, Euclid Industries, LLC provides the world with precision-engineered light-, medium- and heavy-duty truck, trailer, and bus replacement parts that meet and often exceed OEM quality specification standards. So when warehouse distributors and fleet owners see the familiar yellow box from Euclid Industries, LLC they know they're getting far more than ordinary replacement parts. They're getting the best replacement parts made today from a company they can trust. A company that's constantly improving with technology to do a job the only way it knows how. It's a philosophy that will continue to guide us for the years ahead. Worldwide we're committed more than ever to maintaining a tight control over quality in engineering, sales, personalized service, customer support and product training. We will continue to make improvements and add advanced systems. We're doing everything possible to provide our customers with the best truck parts, when and where they're needed.

Building Trust Never Stops.

The Right Way.

SERVING THE HEAVY-DUTY INDUSTRY SINCE 1939

Euclid Industries, LLC

6660 Beta Drive Cleveland, Ohio 44143-2321 (440) 461-4300 · Fax: (440) 461-4307 www.euclidind.com

Distributed By:

Euclid Industries Canada Ltd.

Toronto · Edmonton · Montreal · Vancouver Copyright 1999 Euclid Industries, LLC UD-73 · 11-99.1 · Printed in USA

Information

UD-73_PB-2006

66 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

16212