Read Antiquitites_Medalli_571C11.pdf text version

FABRIC REQUIREMENTS
Date: Aug.23.10
Antiquities MedAllion
CX4522 Plum Ephemeral Antiquity - 1 1/4 yard CX4528 Quartz Quatrefoils - 1 yard CM4507 Quartz Delilah - 1/2 yard
CM4507 Purple Delilah - 1/2 yard
CX4350 Candy Petals - 1/8 yard
CX0376 Bloom Fairy Frost Glitz - Fat 1/4
CX4350 Plum Petals - Fat 1/4
CX4528 Plum Quatrefoils - Fat 1/4
CM4529 Plum Send in the Crowns - Fat 1/4
CM0376 Azalea Fairy Frost - Fat 1/4
CM0376 Candy Fairy Frost - Fat 1/4
CX4350 Pewter Petals - Fat 1/4
Size: Approximately 43" x 43"
Quilt designed by Marinda Stewart
Skill Level: Intermediate
CM4520 Natural Heirloom Lace - 7" x 7"
Backing and Batting 48" x 48"
118 West 22nd Street 5th Floor New York, NY 10011 Tel: 212.704.0774 Fax: 212. 633. 0272 email: [email protected] www.michaelmillerfabrics.com

Quilt designed by Heidi Pridemore. Quilt measures approximately 43" x 43"
Antiquities Medallion
Cutting:
Assembly Instructions: 1) Use the 9º wedge ruler to cut the listed number of medallion segments from each of the six fabrics listed in the cutting directions to make forty-one medallion segments. 2) Refer to the quilt photo for segment placement or position as desired to sew together the forty-one medallion segments to make the medallion. NOTE: There are not an even number of segments for a complete repeat. 3) Fold the 43" CX4522 square into quarters and mark the folds to mark the center lines. Repeat with the medallion. Center the medallion onto the 43" square using center lines as guides with the right side of both fabrics facing up. Pin in place. 4) Stitch around the raw edge of the medallion 1/8" in from the edge. Trim the excess fabric from behind the pieced medallion, close to the stitched line to eliminate bulk to make the quilt top. 5) Using the fan blade template, cut four fan blades from each fabric as listed in the cutting direction. Using the 1/4-circle template, cut four 1/4-circles from CX4528 Quartz. 6) Sew together six di erent fan blades into four sets. Press the seams open. Refer to the quilt photo to position and machine applique one fan and one 1/4 circle on each corner of the quilt top. 7) Following the manufacturer's instructions, press fusible web to the back side of both CM4507 Quartz and CM4507 Purple. Fussy cut twenty-one motifs from CM4507 Quartz and twenty motifs from CM4507 Purple. 8) Refer to the quilt photo for placement to press one motif on the end of each medallion segment covering the raw edge. Press in place. Position and press the remaining motifs to the medallion segments, alternating the colors. Machine applique around the raw edges. 9) Fold the 18" CX4528 Quartz square in half and then in quarters. Use the Arc template on the raw edges of the folded square to make one 18" circle. 10) Fold the 18" circle in quartes and fold it again into three equal segments (folds should alternate direction like an accordion.) Use the oral medallion edge template to cut the decorative edge on the circle. Unfold and press. 10) Center the oral medallion on top of the main medallion. Machine applique the oral medallion in place. OPTIONAL: Use metallic silver thread around the edges. 11) Following the manufacturer's instructions, trace twelve petal templates onto the paper side of the fusible web. Roughly cut out each shape outside the drawn lines and press the petal templates onto the back side of CX4350 pewter fabric. Cut out each petal on the drawn lines. 12) Arrange and press the petals to the oral medallion. Machine applique around the the raw edges. 13) For the ruffle, join the short ends of the 2-1/2" x 42" CX4350 Candy strip, right sides together and sew, to make a circle. Turn the edge under to long edge 1/8" to the wrong side, turn a second time. Topstitch the hem in place. With a needle and thread, gather the raw edge. Set aside. 14) Using the template, cut one 6-1/2" circle from CM4520 Natural. Turn under the edge of the circle a 1/4". Attach the ruffle to the outer edge of the circle, evenly spacing the gathers. Topstich the edges (A decorative stitch was used in the sample).
Always measure the quilt top before cutting border lengths. Yardage:
Fabric:
CX4522 Plum 1-1/4 yards CX4528 Quartz 1 yard CX4507 Quartz CX4507 Purple CX4350 Candy CX0376 Bloom CX4350 Plum CX4528 Plum CX4529 Plum CX0376 Azalea CX0376 Candy 1/2 yard 1/2 yard 1/8 yard Fat 1/4 Fat 1/4 Fat 1/4 Fat 1/4 Fat 1/4 Fat 1/4
CX4350 Pewter Fat 1/4 CM4520 Natural 7" square
· Cut one 43" square. · Cut five 2-1/2" x 42" strips for binding. · Cut one 18" square · See instructions to cut four 1/4-circles . · See instructions to cut twenty-one motifs · See instructions to cut twenty motifs. · Cut one 2-1/2" x 42" for center ruffle. · See instructions to cut six medallion segments and four fan blades. · See instructions to cut seven medallion segments and four fan blades. · See instructions to cut seven medallion segments and four fan blades. · See instructions to cut seven medallion segments and four fan blades. · See instructions to cut seven medallion segments and four fan blades. · See instructions to cut seven medallion segments and four fan blades. · See instructions to cut six petals and one 6" circle. · See instructions to cut one 6-1/2" circle.
You will also need: 48" x 48" backing 48" X 48" batting Fusible Web Threads to match-OPTIONAL- metallic silver thread for accents. Scissors, straight pins, acrylic ruler, mat, rotary cutter 9º wedge ruler for medallion segments One 1 or 1-1/4" gold button OPTIONAL- Applique Pressing Sheet (nonstick pressing sheet) Disclaimers · This pattern is provided as a courtesy to quilt stores, catalogs and quilters. Michael Miller Fabrics, LLC is not responsible for the accuracy of any kits packaged to accompany this pattern. Please direct any inquires to the kit maker. · Yardage requirements for this pattern may allow for excess yardage to accommodate speci c placement of motifs or to allow for any fussy-cutting to achieve the nished quilt design. · While every attempt has been made to give accurate measurements, yardage requirements and construction directions, this does not allow for personal variations in measuring, cutting and or sewing. the enclosed directions were used in the construction of the original quilt.
August 2010
Page 1

Assembly Instructions: 15) Using the template, cut one 6" circle from CX4350 Pewter. With a hand sewing needle and thread, gather around the circle 1/8" in from the edge. Pull the gather tightly and knot o to make a yo-yo. Center the yo-yo, gathered side up, to the center of the ru e unit. Topstitch in place. 16) Place the ru e unit in the center of the quilt top as shown. Top stitch the ru e unit to the quilt top along the ru e/circle seam. 17) Layer backing, batting and quilt top and baste. Quilt as desired, being careful not to catch the ru e. 18) Bind the quilt with the 2-1/2" x 42" CX4528 quartz strips, piece as needed. 19) Sew the gold button to the nished quilt in the center of the yo-yo.
6-1/2" Circle Template 6" Circle Template
Fan Blades Cut Four from Each Color 1/4 Circle Cut Four
Petals Cut Twelve
FOL
D
Cutting Guide for Floral Medallion Edge
FOL
D
August 2010
Page 2