Read blades text version

www.michaeltodd.com

MICHAEL TODD & COMPANY, INC.

toll free 1.800.228.7076

BLADES

MOTOR GRADER BLADES

We offer a complete selection of wear products for motor graders. All steels are roll-forged on rolling mill equipment to the most exacting dimensional and physical tolerances. Our standard stock blades are ForgeTemp® material which consists of hard carbide particles distributed uniformly throughout the steel to best resist wear, and tough roll-forged steel to absorb shock and resist breakage. ForgeTemp® offers an unmatched balanced resistance to abrasion wear and impact breakage which means more wear and less downtime. Stock blades are CDB (curved double beveled), top punched SHP (standard highway punch). CDB/SHP order as follows: Part No. Size

5/8" x 6" 58X6X* 5/8" x 8" 58X8X* 3/4" x 6" 34X6X* 3/4" x 8" 34X8X* 1X8X* 1" x 8" *insert overall length in

Type CDB/SHP CDB/SHP CDB/SHP CDB/SHP CDB/SHP feet

Hole Spacing 12" spacing 12" spacing Modified 6" spacing heavy duty Modified 6" spacing heavy duty Modified 6" spacing heavy duty

SPECIAL ORDER OPTIONS: *Max Temp® through hardened blades *Serrated (toothed) grader blades *Curved Single Bevel (CSB) and Curved No Bevel (CNB) *½" thick blades *Special hole spacing, bolt size, center punching

curved double bevel (CBD)

standard

heavy duty BOLT INFORMATION: All holes are countersunk for plow bolts. The majority of grader blades have holes for 5/8" bolts. Some select machines require grader blades with holes for ¾" bolts. Please specify when holes for ¾" bolts are required. Grader blades and wear parts available for such manufacturers as Caterpillar®, Champion®, Deere®, Dresser®, Fiatallis®, Komotsu®, Trojan®, Wabco® and more.

BLADES

SNOWPLOW BLADES

Call us for one of the largest selections of snowplow blades from the small pick-up plow through the large truck plows and extensions. All blades are manufactured with roll-forged steel suited to resist cold-weather breakage and provide maximum wear. All blades are precision punched to mount quickly and easily. Blades are FSE (flat square edge) and punched SHP (standard highway punch) square holes or to individual snowplow specifications. FSE/SHP order as follows: Part No. Size Type Hole Spacing 12" 12" 12" 12" 12" spacing spacing spacing spacing spacing Hole type/size Square holes for 5/8" bolts Square holes for 5/8" bolts Square holes for 5/8" bolts Countersunk holes for 5/8" bolts Countersunk holes for 5/8" bolts

1 12X6X* /2" x 6" FSE/SHP 5 58X6X* /8" x 6" FSE/SHP 5 58X8X* /8" x 8" FSE/SHP 3/4" x 8" 34X8X* FSE/SHP 1X8X* 1" x 8" FSE/SHP *insert overall length in feet

SPECIAL ORDER OPTIONS: · Extra thickness for extended wear · Countersunk holes · Special hole spacing · Surface hardening · Mitred ends

flat square edge (FSE)

snowplow cutting edge

Snow plow blades and wear parts available for Boss® (straight and V-plow), Flink-Baker® (straight and trip style), Frink®, Gledhill®, Good Roads®, Meyer®, Northman®, Polar®, Root®, Sicard®, Valk®, Wausau®, Western® (straight and V-plow) and more!

See page 62 for complete fastener guide.

All Original Equipment Manufacturer (OEM) names and numbers are used for identification purposes only and Michael Todd & Company, Inc. does not imply that the products we offer are OEM products.

Page 58

helping maintain america's beautiful communities

RUBBER SNOWPLOW BLADES

Rubber snowplow blades are available for a variety of applications from lawn and garden plows to large truck plows. Material can be cut to any length and center slotted or drilled to your specifications. Center slotting holes allows for adjustment of cutting edge and proper overhang on moldboard for different snow conditions. Rubber blades serve as a large squeegee to clean the pavement surface. These cutting edges are more "forgiving" of road surface irregularities such as uneven surfaces, raised manholes, abnormally high crowned roads, tar-gravel surfaces and where protection of new parking lots and pavement is a factor.

METAL RETAINING STRIP BOLT HOLES SHOULD BE SLOTTED FOR BLADE ADJUSTMENT 2" OVERHANG*

PLOW FRAME ATTACHES TO TRUCK FRAME

* 3" RECOMMENDED FOR LIGHT SLUSH. 1" RECOMMENDED FOR HARD PACKED SNOW & ICE.

STEEL RUNNER OR SHOE CARRIES WEIGHT

RUBBER AT REST RUBBER PLOWING WEAR POINT

Part # 1X6X* 112X8X*

Size 1"x6"

Application Small lawn and garden equipment Small truck plows, motor graders, underbody plows Front mounted plows Large front mounted plows and large V-plows

11/2" x 8" 112X10X* 11/2" x 10" 112X12X* 11/2" x 12" *insert overall length in feet

BLADES

CURB SHOES

Protect the ends of your snowplow cutting edges with curb shoes. These shoes are designed to bolt up to the last two holes on SHP (standard highway punch) snowplow blades. Choose from shoes specifically for the right hand and left hand side of the plow or from universal shoes that can be used on either side.

No. V6053R RH Curb Shoe (shown) 1/2" x 6" No. V6053L LH Curb Shoe (opposite) " No. BB1-PP616 Universal Curb Shoe 5/8" x 6" No. BB1-PP617 Universal Curb Shoe 5/8" x 8"

PLOW SHOES

We have a wide variety of plow shoes for snowplows. The following is just a sample of the different styles of shoes available. There are round shoes, skid shoes, wear plates and mushroom style shoes. The make and model of your plow and the OEM part number will help us properly identify your snowplow shoe. In most cases we can match or fabricate your plow shoe.

No. WA1PP023

No. WA1PP098

No. F8PP175

No. MP1PP017

No. MP1PP0023

No. WP1PP0014

All Original Equipment Manufacturer (OEM) names and numbers are used for identification purposes only and Michael Todd & Company, Inc. does not imply that the products we offer are OEM products.

Page 59

www.michaeltodd.com

MICHAEL TODD & COMPANY, INC.

toll free 1.800.228.7076

LOADER EDGES

Our complete line of loader blades includes bolt-on cutting edges and weld-on cutting edges for most models of loaders. We can supply what you need whether you are matching an OEM specification blade, welding on a cutting edge, or removing your weld-on edge to attach an adapter and bolt-on assembly. We have loader cutting edges for Bobcat®, Case®, Caterpillar®, Deere®, Dresser®, Fiatallis®, Kawasaki®, Kobelco®, Komotsu®, Massey Ferguson®, Terex®, Trojan®, and many other loaders.

No. FDB Flat Double Bevel Bolt-on Cutting Edge

No. FSB Flat Single Bevel Weld-on Cutting Edge

No. FSB / FDD Flat Single Bevel Adapter Flat Double Duty Bolt-on Edge

SCRAPER CUTTING EDGES

Available in straight or drop center style and heavy duty or extra heavy duty.

DOZER CUTTING EDGES

Beveled edges are roll-forged to shape, not flame- or machinebeveled from ordinary steel.

scraper cutting edge

routing bit

end bit

dozer cutting edge

BLADES

Call with your OEM Part Number, Make, Model and Serial Number

The following information is important when determining your cutting edge requirements. Call us with the OEM part number, make, model and serial number of your equipment to determine exact cutting edge required. The following information is also helpful in determining your needs:

L T

HOLE SPACING

B W

T

= BOLT SIZE = TOTAL HOLES =

W = L = HOLE SPACING = B =

COUNTERSINK ON SHORT SIDE?

All Original Equipment Manufacturer (OEM) names and numbers are used for identification purposes only and Michael Todd & Company, Inc. does not imply that the products we offer are OEM products.

Page 60

helping maintain america's beautiful communities

BOX SCRAPER BLADES

A common piece of construction equipment is a rear tractor mounted box scraper. We stock Digmor® and Gannon® box scraper edges. These blades are CDB (Curved Double Bevel), center punched to specifications. They have countersunk holes for 5/8" plow bolts. DIGMOR 1/2" x 6" x 751/2" 1/2" x 6" x 791/2" 1 /2" x 6" x 841/2" GANNON 1/2" x 6" x 755/8" 1 /2" x 6" x 795/8" 1 /2" x 6" x 835/8"

8-hole 8-hole 8-hole

7-hole 7-hole 7-hole

CARBIDE WEAR PRODUCTS

Tungsten carbide in its' pure form is second only to diamond in hardness. It is alloyed with titanium (which prevents grain grown), tantaulum (to prevent deforming of carbide particles), and cobalt (a bonding agent that reduces the possibility of breakage due to impact). All this in combination provides a material that resists impact and provides extraordinary wear resistance. Carbide product is available in two different forms to increase the performance for most of the wear products we offer. Carbide inserted cutting edges are primarily used on the snowplow and grader cutting edges. Carbide embedded wear edges are used in the loader, scraper, dozer and motor grader application.

CARBIDE INSERTED CUTTING EDGES Tungsten carbide-tipped snowplow and motor grader blades feature permanent inserts of virgin tungsten carbide, the most durable material in the world. The inserts resist wear and abrasion like no other material to dramatically reduce the need for blade changes. Downtime is turned into work time. Carbide tipped blades are available for nearly any machine, even smaller plows such as Meyer and Western. Snowplow blades are FSE (flat square edge). Grader blades are FSB (flat single bevel) to fit grader moldboard.

BLADES

FSE (FLAT SQUARE EDGE) SNOW PLOW BLADES No. CB1-5082 ¾"x6"x36" carbide inserted FSE snowplow blade No. CB1-5083 ¾"x6"x48" carbide inserted FSE snowplow blade

FSB (FLAT SINGLE BEVEL) GRADER BLADES No. CB1-5206 ¾"x6"x36" carbide inserted FSB snowplow blade No. CB1-5207 ¾"x6"x48" carbide inserted FSB snowplow blade Use a combination of 3 foot and 4 foot sections to match the overall length of your moldboard Example: 10 foot moldboard uses (2) 3 foot sections and (1) 4 foot section. Available in standard and special hole punching. Call 800.228.7076 for special hole punching quotation.

CARBIDE EMBEDDED WEAR PARTS Our carbide embedded products use crushed block tungsten carbide. The particles are embedded 3/16" into the base metal and will not chip or flake off. Embedded blades are made with heat treated base material to improve impact resistance. The embedding process applies crushed tungsten carbide in a molten puddle to the base steel which then becomes part of the parent material. This is a highly effective process for heavy wear parts on such equipment as loaders, scrapers, dozers and bucket teeth. We have a complete line of standard patterns for OEM equipment and have the ability to customize the embedding process to your specifications. No. OEM part number +TN for tungsten non-reversible (1 side) or +TR for tungsten reversible (2 sides)

All Original Equipment Manufacturer (OEM) names and numbers are used for identification purposes only and Michael Todd & Company, Inc. does not imply that the products we offer are OEM products.

Page 61

www.michaeltodd.com

MICHAEL TODD & COMPANY, INC.

toll free 1.800.228.7076

FASTENERS

PROOF LOAD STRESS SPECIFICATION MATERIAL TENSILE STRENGTH MINIMUM

ksi

ksi

MINIMUM

MAXIMUM

Grade 5 SAE-429 Grade 8 SAE-429

Medium carbon steel, quenched and tempered Medium carbon steel, quenched and tempered

84 120

120 150

C25 C33

C34 C39

grade 5 carriage bolt

grade 8 plow bolt

CARRIAGE BOLTS/NUTS (Grade 5) 1 1/2" CGE 12X2 /2" x 2" bolt/nut 5/8" x 2" bolt/nut 5/8" CGE 58X2 5/8" x 21/2" bolt/nut CGE 58X25 5 CGE 58X3 /8" x 3" bolt/nut 5/8" x 31/2"bolt/nut CGE 58X35

We offer a complete line of cutting edge bolts. Our carriage bolts for square holes are SAE grade 5 and have a full square neck to provide high strength. The SAE grade 5 carriage bolt can be easily identified with three marks on the bolt head. Our plow bolts for countersunk holes are SAE grade 8 alloy with a dome head. This dome head provides more metal on the top of the bolt to lessen "dishing" wear which weakens the bolt. The SAE grade 8 plow bolts are identified by the six marks on the bolt head. Our plow bolts come with grade 8 alloy hex nuts for full strength.

PLOW BOLTS/NUTS (Grade 8) 5/8" PLOW 582 G8 5/8" x 2" bolt/nut PLOW 5825 G8 5/8" x 21/2" bolt/nut PLOW 583 G8 5/8" x 3" bolt/nut PLOW 5835 G8 5/8" x 31/2" bolt/nut 3/4" PLOW 34225 G8 3/4" x 21/4" bolt/nut PLOW 3425 G8 3/4" x 21/2" bolt/nut PLOW 34275 G8 3/4" x 23/4" bolt/nut PLOW 343 G8 3/4" x 3" bolt/nut PLOW 3435 G8 3/4" x 31/2" bolt/nut 7/8" PLOW 78225 G8 7/8" x 21/4" bolt/nut 1" PLOW 1275 G8 1" x 23/4" bolt/nut PLOW 13 G8 1" x 3" bolt/nut PLOW 135 G8 1" x 31/2" bolt/nut

BLADES

PLOW MARKERS

Easily identify the ends of your snowplow moldboard with our snowplow markers. Manufactured with a wire rope center for flexibility and a plastic outer layer in an easy-to-see yellow color. These plow markers will not get brittle in the cold weather. Available for both angle mounting and bolt-thru mounting.

SNOWPLOW DEFLECTOR RUBBER

DON'T FORGET... The rubber deflector material for the top of your snow plow moldboard. This 2-ply belted rubber is available in bulk or cut-to-order. Material does not have holes to allow you to drill to your own plow specifications. 50 feet per roll. No. DEFL1 No. DEFL2

3 8 3 8

/ " x 10" / " x 12"

SNOWPLOW WAX

No. WAX 5-gallon pail Keeps snow from sticking to blade or dump boxes. Apply to surface by spraying or brushing. Allow to dry. Reapply as necessary.

angle mount plow markers

bolt-thru

No. 500 24" angle mount plow marker No. 500-36 36" angle mount plow marker No. 501 24" bolt-thru marker with nut

M T

MICHAEL TODD

Since 1948

w w w.michaeltodd.com

& C O M P A N Y, I N C.

1401 WILLIAM STREET · OMAHA, NEBRASKA 68108 visit us on the world wide web at

Page 62

helping maintain america's beautiful communities

SPREADER PARTS

CHAINS

We have spreader chains for many different models of salt / sand spreaders. Use this chart to list specifications for your spreader. Call us at 800.228.7076 and we will help you identify the chain you need.

Model #: Box Length: Chain #: (stamped in the side of the chain: 662, 667H, 667X) Number of Pitches: Length of Chain: Cross Bar Spacing: (ever other link, every third link, etc.) Dimensions: W= X= Y= Z= Spreader Chain

BLADES

SPINNERS

Our urethane spinners are tough enough to withstand the harshest winter conditions. Urethane is both flexible and has a "memory". If bent or crushed our spinners flex and then return to their original molded shape. Large chunks of frozen material pass through without damage to the spinner or hydraulic system. The advantages of our urethane spinners quickly adds up to reduced maintenance, longer spinner and hydraulic life, and more effective material dispersal and less waste. Available 13" through 24". · · · · · · The original urethane spinner Flexible . . . lightweight Will not rust or corrode Wear and abrasion resistant Inhibits material caking and build-up Specially formed, low trajectory vanes

Easy-to-Order Information: A. Diameter of spinner (13" through 24") B. Rotation of spinner (clockwise / counter) C. Material being spread

Salt and Sand Spinners

Rock and Cinder Spinners

Page 63

www.michaeltodd.com

MICHAEL TODD & COMPANY, INC.

toll free 1.800.228.7076

TEETH, PINS AND ADAPTERS

Choose from a large selection of teeth, pins and adapters for loaders, backhoes and scarifiers. We have many different tooth styles to meet your digging requirements. Whether you have an adapter in place and are looking for the wear tooth or if you only have a bucket edge and want to add adapters and teeth, you've come to the right place. With just a little information we can help identify the product you need to get the job done. The following are some guidelines in tooth replacement. 1. Make, Model & Serial Number of Equipment 2. OEM Part number 3. Adapter style (weld-on or bolt-on) 4. Tooth Style (pin-on or crimp-on) 5. Pin Style (flex pin, roll pin or other) 6. Approximate measurements of adapter or tooth

TOOTH STYLES

H&L STYLE

Standard Hensley Tooth No. 2AHX 3CHXL 23HXL 24HX 25HX Tooth Type Standard Long Standard Standard Standard

Long Flex Pin No. Crimp-on Crimp-on 23PB 24PB 25/26PB

Star

Tiger

Twin Tiger Weight (lbs.) .9 2.2 2.7 3.7 5.2

Flared

A 4.44 5.50 5.50 6.75 7.06

B 1.63 2.13 2.13 2.13 2.63

C 1.06 1.56 1.56 1.56 2.06

D 1.38 1.75 1.69 2.13 2.13

E 2.69 3.25 3.13 4.13 4.13

Teeth available in the different styles pictured above. Call for details.

BLADES

ADAPTER STYLES

wrap-around

bottom-leg

flush-mount

bolt-on

Call with the bucket lip thickness as well as the make, model, serial number and style of adapter you are looking for. Please have bolt pattern available for bolt-on adapters.

CATERPILLAR STYLE PIN-ON TEETH Tooth No. 1U3202HX 1U3252HX 1U3302HX 1U3352HX Description Long tooth Long tooth Long tooth Long tooth Pin No. 9W7112P 9J2258P 9J2308P 9J2358P Washer No. 4T0001W 3G9609W 3G9609W 6Y9459W

SCARIFIER SHANKS AND TEETH No. 2D5572 Heavy duty drive-on tooth with rectangular slot

M T

MICHAEL TODD

Since 1948

w w w.michaeltodd.com

& C O M P A N Y, I N C.

1401 WILLIAM STREET · OMAHA, NEBRASKA 68108 visit us on the world wide web at

All Original Equipment Manufacturer (OEM) names and numbers are used for identification purposes only and Michael Todd & Company, Inc. does not imply that the products we offer are OEM products.

Page 64

Information

blades

7 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

140466


You might also be interested in

BETA
Microsoft Word - Europa 2012.doc
blades