Read Jib Sheeting Components: Murrays 2009 Catalog PDF pg 23 text version

JIB SHEETING COMPONENTS

Last update Dec. 2009: Click here to go to the Murrays Online Store for current information

D

E

F

G

H

I

D-E. H-16/18 JIB TRACK HARKEN® LITTLE HEXARATCHET

G. KISME OK FOR H-16

05-0410 05-0400

A smaller Harken on/off Hexaratchet with 2.25" sheave, Delrin® ball bearings, becket and aluminum Cam-Matic cleat. The Hexaratchet is ideal for hand-held jib sheeting and long jib sheet life. Standard equipment jib block on Nacras, Prindles and later Hobie® 18s. 7/16" line capacity. Each.

28-0188 $153.85

Stainless jib tracks are 5/8". An end stop can be fastened with a #19-1620 screw or #19-5021 countersunk rivet. Use six #19-5021 rivets to fasten 18" track.

D. 21-0366 E. 21-0363 19-1620 19-5021 19-5031 21-0364 Track End Stop $3.25 Jib Track 5/8" x 18" $18.00 #8 x 1 Flathead Self-Tapping Machine Screw $.34 CCC 6-4 Rivet $.74 CCP 6-4 Rivet $.70 Jib Track Section 5/8" x 5' $60.00

OK with Harken block­ Pair $49.00 OK car only­ Each $8.00

H. JIB TRAVELER CAR

25-0267

Jib Traveler Car with Block for H-16­ Each

$49.00

I. LOW PROFILE SWIVEL WITH ROLLER FAIRLEAD

JIB TRAVELER CARS FOR H-16 WITH INTEGRATED TRACK

F. JIB TRAVELER CARS FOR H-16

Black plastic cars have four holes and slide freely in the track. Low profile shape saves needed space when mast is raked to the extreme. #123021 is the only car that fits Hobie's integrated jib track which is extruded into the crossbar, as opposed to the external track which is riveted to the crossbar (standard on pre-1997 H-16). Pair. By Tren Tec.

21-0371 21-0398 12-3020 12-3021 For 1996 and Earlier H-16 with External Track $18.00 For 1997 or Later H-16 with Integrated Jib Track $18.00

This is a must have item when rebuilding your older boat. Swiveling dead eye with cam cleat and stop. Anodized aluminum cam cleat and black acetal dead eye and fairlead. Includes car with stop and is complete with roller fairlead. Pair.

01-3130 $140.00

Hobie's jib traveler car for the integrated track crossbar on the Hobie 16 adds bearings to the popular version from the 2004 Worlds. Standard equipment since late 2005, this jib traveler is constructed of Zytel, a very strong, glass-reinforced nylon that resists fatigue and impact failure. Brass traveler bearings give easier movement under load. Includes holes for anchoring traveler and traveler return lines. Each.

50-25232201 For Integrated Jib Track Port $110.00 50-25232211 For Integrated Jib Track Starboard $110.00

LOOP SLIDES AND STOPS

Traveler car with spring-loaded stop pin and eyestrap. 21-0371 for 5/8" track fits Hobie®. 21-0398 is for 7/8" track and fits P-18.2, P-19 and post-March 1989 Nacra 5.0, 5.5SL, 5.7, 5.8 and 6.0.

21-0371 21-0398 For 5/8" Track For 7/8" Track $27.00 $30.00

Check the integrity of the rivets or screws that hold down the track (especially Hobie® 16 jib track). Replace loose fasteners before they pull out and ruin your day! When replacing rivets, check for oversize holes. In some cases, a rivet casing can be used to shim a standard size rivet to an oversize hole.

Blocks .................................................... pg 25 Gloves ..........................................................13 Oxen Blocks ...............................................24 Rope ............................................................ 15

JIB HALYARDS & KITS

H-16 AUSSIE JIB HALYARD

C

A

B

A-C. SPRINGS & SHACKLES

A. 28-0071 B. 21-0319

J

Harken is a universal spring. Soft conical spring is used for bullet blocks; medium is for jib blocks.

Harken Stand-Up Spring $1.50 Stand-Up Spring (Conical ­Soft) for Harken Bullet Block (eg. H-16 Jib Traveler Car, Hobie® Spinnaker Pole Blocks) $2.00 Stand-Up Spring (Conical ­ Medium) for Oxen Blocks, OK Car, etc. $2.00 Harken 3/16" Stamped Shackle $3.55

J. JIB HALYARD ROPE WITH SISTER CLIPS

Little Sister Clips are a quick on/off halyard extension system. They speed the untie and retie process so that a minimum amount of sail snapping occurs while you cleat up.

04-7732 J. 04-7734

Reduce mast compression by 66%! It allows easier tacking, better mast rotation and consistent mast bend! Use with existing lower forestay assembly. The "fail-safe" pigtail keeps block failure from resulting in de-masting. A similar system is stock on new H-16s. Complete kit includes everything you need: hardware with all Harken blocks, 70' of prestretched line, zippered pouch and instructions. Racing class legal.

01-3302 Kit $120.00 02-3300-00 Pigtail Only $23.00

C. 21-0320 28-0072

H-18/20 $16.50 Prindle $21.00

Prices & specifications are subject to change

www.murrays.com

800-786-7245

CATAMARAN ACCESSORIES 23

Information

Jib Sheeting Components: Murrays 2009 Catalog PDF pg 23

1 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

467951


You might also be interested in

BETA
Jib Sheeting Components: Murrays 2009 Catalog PDF pg 23