Read Roller Furling Hardware; Spinnaker Hardware: Murrays 2009 Catalog PDF pg 41 text version

ROLLER FURLING HARDWARE

B-C. ROLLER FURLING HARDWARE

Harken's high load drum has maximum working load of 950 lbs., a height of 2-3/4", and a maximum drum diameter of 2-3/4".

B. 28-0165 Harken High-Load Drum $210.00 C. 50-61900000 Hobie® Furler Assembly $252.00

B C

Last update Dec. 2009: Click here to go to the Murrays Online Store for current information

HOBIE® FURLER TUNE-UP KIT

50-61900900 $42.00

Includes bearings, bearing cage, nyliner, nylon sleeve, darby rings, spool and housing.

D-F. ROLLER FURLING SWIVELS

#30-5061 is shown; A other kits may vary. Please see descriptions below.

The simplest, strongest and least expensive roller furling swivels for roller furling jibs. Harken swivel has a safe working load of 950 lbs., weighs 2.6 oz. and has a distance between pins of 2-1/2". Ronstan swivel eye/eye weighs 2.3 oz., 1-15/16" between center of holes, and has a 2200 lb. breaking load; eye-jaw weighs 2.1 oz., pin-tocenter-of-hole measurement is 1-7/8", with a breaking load of 3740 lb.

D. 28-0164 Harken Hi-Load Swivel $135.00 E. 21-0078 Ronstan Swivel Eye & Eye $63.35 F. 21-078B Ronstan Swivel Eye & Jaw $69.75

D

E

F

A. ROLLER FURLING JIB HARDWARE KITS

SPINNAKER HARDWARE

Furl your jib while beached to save your sail from flapping or for when flying a spinnaker. Specify boat model when ordering (Example: P-18.2 or N-5.8). A. Prindle® kits (shown in photo) include: Harken® roller furling drum, upper forestay with Ronstan® swivel and 2" stainless steel ring, Harken® 279 cleat with eyestrap for front crossbar, fasteners and instructions.

30-5061 Prindle: Specify Model $325.00

MID-POLE SNUFFER SYSTEM H-14 DOLPHIN STRIKER

Supports the mast and maintains front crossbar integrity. Needed for trapeze, heavy air sailing or jib kits. Racing class legal. Includes black anodized post, wire, two eye bolts with nuts, rivets and instructions.

01-2083 01-0106 Kit $80.00 Eye Bolt Only $3.00

G

Photo: Hobie Cat

A snuffer funnels the spinnaker into the sock to facilitate launching and retrieval, even while sailing a triangular course. Keeps the tramp clean. SNUFFER HOOP Fiberglass ring attaches to spinnaker pole to guide the spinnaker in and out of the sock.

56-9710 56-9711 $180.00 $188.00

SNUFFER SOCK Holds sail when not in use. SPINNAKER POLE 1.5" OD aluminum pole is 12 feet long. Cut to fit. Delivery of pole is by DHL or other arrangement. Attach pole to boat with cap and pin. Order a second pin for a more finished appearance.

56-9622 56-9625 56-9626 Pole $230.00 End Cap (1-5/16" OD) $10.00 Main Beam Pin $12.00

Nacra® kit includes: Harken® roller furling drum with 10-hole adjuster and luff tension cleat attached, upper and lower forestay with Ronstan® swivel and Hobie® halyard block, halyard wire with block and shackle attached, halyard line, Harken® Micro cleat with eye strap for front crossbar, fasteners and instructions.

30-5051 Nacra: Specify Model

®

G. UNIVERSAL SPINNAKER POLE

$425.00

Simplify spinnaker tack control. This pole moves tack forward for better air flow between the main and spinnaker. The 2" pole is maximum class legal length for H-21 (144"), but ships in two pieces for convenience and economy. By Hobie®.

OVERSIZED SHIPPING RATES APPLY 50-40998000 297.00

H-20 Hobie -Style kit utilizes the Hobie® halyard system (as on the H-18). It includes: Hobie® roller furling drum with adjuster, Hobie-style jib halyard system, upper and lower forestay with Ronstan® swivel, Harken® micro cleat with eyestrap for front crossbar, fasteners and instructions.

30-5081 H-20 Hobie-Style $495.00

SMALL MAST TANG

SUPER H-17 ROLLER FURLING JIB HARDWARE KIT

Stainless steel tang with four mounting holes is used for mounting spinnakers.

56-6607 $14.00

H-16 kit includes: Harken® roller furling drum, pigtail, Ronstan® swivel and instructions.

30-5020 H-16 $315.00

Give your 17 more horsepower! Improves light wind performance to weather and under all conditions off the wind. Hardware kit includes bridle crossbar with Harken® roller furling drum and upper swivel, Harken® jib cleats mounted on 18" jib track, sheets, halyards, necessary hardware and instructions.

OVERSIZED SHIPPING RATES APPLY 30-5104 Hardware Kit $1095.00 01-1350 H-17 Crossbar Assembly $275.00

H-14 kit includes: 1/8" coated shrouds, complete trapeze system (wires with adjustments), jibsheets and cleat assemblies, Harken® Micro cleat with eye strap for front crossbar, pigtail, Ronstan® swivel and instructions. A dolphin striker should be added if not already on the boat (see next column).

30-5015 H-14 $725.00

Line ....................................................... pg 15 Sails...............................................................40 Photo: John Healey

Prices & specifications are subject to change

www.murrays.com

800-786-7245

CATAMARAN ACCESSORIES 41

Information

Roller Furling Hardware; Spinnaker Hardware: Murrays 2009 Catalog PDF pg 41

1 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

1262572